`ɵɵNgOnChangesFeature()` would set `ngInherit`, which is a side effect and also not necessary. This was pulled out to module scope so the function itself can be pure. Since it only curries another function, the call is entirely unnecessary. Updated the compiler to only generate a reference to this function, rather than a call to it, and removed the extra curry indirection.
PR Close#35769
In #33705 we made it so that we generate pure functions for object/array literals in order to avoid having them be shared across elements/views. The problem this introduced is that further down the line the `ContantPool` uses the generated literal in order to figure out whether to share an existing factory or to create a new one. `ConstantPool` determines whether to share a factory by creating a key from the AST node and using it to look it up in the factory cache, however the key generation function didn't handle function invocations and replaced them with `null`. This means that the key for `{foo: pureFunction0(...)}` and `{foo: null}` are the same.
These changes rework the logic so that instead of generating a `null` key
for function invocations, we generate a variable called `<unknown>` which
shouldn't be able to collide with anything.
Fixes#35298.
PR Close#35481
We had some logic for generating and passing in the `elIndex` parameter into the `hostBindings` function, but it wasn't actually being used for anything. The only place left that had a reference to it was the `StylingBuilder` and it only stored it without referencing it again.
PR Close#34969
Compiler keeps track of number of slots (`vars`) which are needed for binding instructions. Normally each binding instructions allocates a single slot in the `LView` but styling instructions need to allocate two slots.
PR Close#34616
This change moves information from instructions to declarative position:
- `ɵɵallocHostVars(vars)` => `DirectiveDef.hostVars`
- `ɵɵelementHostAttrs(attrs)` => `DirectiveDef.hostAttrs`
When merging directives it is necessary to know about `hostVars` and `hostAttrs`. Before this change the information was stored in the `hostBindings` function. This was problematic, because in order to get to the information the `hostBindings` would have to be executed. In order for `hostBindings` to be executed the directives would have to be instantiated. This means that the directive instantiation would happen before we had knowledge about the `hostAttrs` and as a result the directive could observe in the constructor that not all of the `hostAttrs` have been applied. This further complicates the runtime as we have to apply `hostAttrs` in parts over many invocations.
`ɵɵallocHostVars` was unnecessarily complicated because it would have to update the `LView` (and Blueprint) while existing directives are already executing. By moving it out of `hostBindings` function we can access it statically and we can create correct `LView` (and Blueprint) in a single pass.
This change only changes how the instructions are generated, but does not change the runtime much. (We cheat by emulating the old behavior by calling `ɵɵallocHostVars` and `ɵɵelementHostAttrs`) Subsequent change will refactor the runtime to take advantage of the static information.
PR Close#34683
The `getProjectAsAttrValue` in `node_selector_matcher` finds the
ProjectAs marker and then additionally checks that the marker appears in
an even index of the node attributes because "attribute names are stored
at even indexes". This is true for "regular" attribute bindings but
classes, styles, bindings, templates, and i18n do not necessarily follow
this rule because there can be an uneven number of them, causing the
next "special" attribute "name" to appear at an odd index. To address
this issue, ensure ngProjectAs is placed right after "regular"
attributes.
PR Close#34617
Prior to this commit, if a template (for example, generated using structural directive such as *ngIf) contains `ngProjectAs` attribute, it was not included into attributes array in generated code and as a result, these templates were not matched at runtime during content projection. This commit adds the logic to append `ngProjectAs` values into corresponding element's attribute arrays, so content projection works as expected.
PR Close#34200
Previously, due to a bug a `Context` with `isStatement: false` could be
returned in places where a `Context` with `isStatement: true` was
requested. As a result, some statements would be unnecessarily wrapped
in parenthesis.
This commit fixes the bug in `Context#withStatementMode` to always
return a `Context` with the correct `isStatement` value. Note that this
does not have any impact on the generated code other than avoiding some
superfluous parenthesis on certain statements.
PR Close#33514
Currently if a consumer does something like the following, the object literal will be shared across the two elements and any instances of the component template. The same applies to array literals:
```
<div [someDirective]="{}"></div>
<div [someDirective]="{}"></div>
```
These changes make it so that we generate a pure function even if an object is constant so that each instance gets its own object.
Note that the original design for this fix included moving the pure function factories into the `consts` array. In the process of doing so I realized that pure function are also used inside of directive host bindings which means that we don't have access to the `consts`.
These changes also:
* Fix an issue that meant that the `pureFunction0` instruction could only be run during creation mode.
* Make the `getConstant` utility slightly more convenient to use. This isn't strictly required for these changes to work, but I had made it as a part of a larger refactor that I ended up reverting.
PR Close#33705
Now that we've replaced `ngBaseDef` with an abstract directive definition, there are a lot more cases where we generate a directive definition without a selector. These changes make it so that we don't generate the `selectors` array if it's going to be empty.
PR Close#33431
Removes `ngBaseDef` from the compiler and any runtime code that was still referring to it. In the cases where we'd previously generate a base def we now generate a definition for an abstract directive.
PR Close#33264
Pipe defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
ngPipeDef to pipe. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.
PR Close#33142
Factory defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
ngFactoryDef to fac. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.
Note that the other "defs" (ngPipeDef, etc) will be
prefixed and shortened in follow-up PRs, in an attempt to
limit how large and conflict-y this change is.
PR Close#33116
Directive defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
ngDirectiveDef to dir. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.
Note that the other "defs" (ngFactoryDef, etc) will be
prefixed and shortened in follow-up PRs, in an attempt to
limit how large and conflict-y this change is.
PR Close#33110
Component defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
`ngComponentDef` to `cmp`. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.
Note that the other "defs" (ngDirectiveDef, etc) will be
prefixed and shortened in follow-up PRs, in an attempt to
limit how large and conflict-y this change is.
PR Close#33088
Currently Ivy stores the element attributes into an array above the component def and passes it into the relevant instructions, however the problem is that upon minification the array will get a unique name which won't compress very well. These changes move the attributes array into the component def and pass in the index into the instructions instead.
Before:
```
const _c0 = ['foo', 'bar'];
SomeComp.ngComponentDef = defineComponent({
template: function() {
element(0, 'div', _c0);
}
});
```
After:
```
SomeComp.ngComponentDef = defineComponent({
consts: [['foo', 'bar']],
template: function() {
element(0, 'div', 0);
}
});
```
A couple of cases that this PR doesn't handle:
* Template references are still in a separate array.
* i18n attributes are still in a separate array.
PR Close#32798
Prior to this commit, the `ngProjectAs` attribute was only included with a special flag and in a parsed format. As a result, projected node was missing `ngProjectAs` attribute as well as other attributes added after `ngProjectAs` one. This is problematic since app code might rely on the presence of `ngProjectAs` attribute (for example in CSS). This commit fixes the problem by including `ngProjectAs` into attributes array as a regular attribute and also makes sure that the parsed version of the `ngProjectAs` attribute with a special marker is added after regular attributes (thus we set them correctly at runtime). This change also aligns View Engine and Ivy behavior.
PR Close#32784
This patch is a final major refactor in styling Angular.
This PR includes three main fixes:
All temporary state taht is persisted between template style/class application
and style/class application in host bindings is now removed.
Removes the styling() and stylingApply() instructions.
Introduces a "direct apply" mode that is used apply prop-based
style/class in the event that there are no map-based bindings as
well as property collisions.
PR Close#32259
PR Close#32591
This patch is a final major refactor in styling Angular.
This PR includes three main fixes:
All temporary state taht is persisted between template style/class application
and style/class application in host bindings is now removed.
Removes the styling() and stylingApply() instructions.
Introduces a "direct apply" mode that is used apply prop-based
style/class in the event that there are no map-based bindings as
well as property collisions.
PR Close#32259
PR Close#32596
This patch is a final major refactor in styling Angular.
This PR includes three main fixes:
All temporary state taht is persisted between template style/class application
and style/class application in host bindings is now removed.
Removes the styling() and stylingApply() instructions.
Introduces a "direct apply" mode that is used apply prop-based
style/class in the event that there are no map-based bindings as
well as property collisions.
PR Close#32259
Replaces the `select` instruction with a new one called `advance`. Instead of the jumping to a specific index, the new instruction goes forward X amount of elements. The advantage of doing this is that it should generate code the compresses better.
PR Close#32516
Reworks the compiler to output the factories for directives, components and pipes under a new static field called `ngFactoryFn`, instead of the usual `factory` property in their respective defs. This should eventually allow us to inject any kind of decorated class (e.g. a pipe).
**Note:** these changes are the first part of the refactor and they don't include injectables. I decided to leave injectables for a follow-up PR, because there's some more cases we need to handle when it comes to their factories. Furthermore, directives, components and pipes make up most of the compiler output tests that need to be refactored and it'll make follow-up PRs easier to review if the tests are cleaned up now.
This is part of the larger refactor for FW-1468.
PR Close#31953
Currently we always generate the `read` parameter for the view and content query instructions, however since most of the time the `read` parameter won't be set, we'll end up generating `null` which adds 5 bytes for each query when minified. These changes make it so that the `read` parameter only gets generated if it has a value.
PR Close#31667
When injecting a `ChangeDetectorRef` into a pipe, the expected result is that the ref will be tied to the component in which the pipe is being used. This works for most cases, however when a pipe is used inside a property binding of a component (see test case as an example), the current `TNode` is pointing to component's host so we end up injecting the inner component's view. These changes fix the issue by only looking up the component view of the `TNode` if the `TNode` is a parent.
This PR resolves FW-1419.
PR Close#31438
This commit is the final patch of the ivy styling algorithm refactor.
This patch swaps functionality from the old styling mechanism to the
new refactored code by changing the instruction code the compiler
generates and by pointing the runtime instruction code to the new
styling algorithm.
PR Close#30742
Currently we reuse the same instruction both for regular property bindings and property bindings on the `host`. The only difference between the two is that when it's on the host we shouldn't support inputs. We have an optional parameter called `nativeOnly` which is used to differentiate the two, however since `nativeOnly` is preceeded by another optional parameter (`sanitizer`), we have to generate two extra parameters for each host property bindings every time (e.g. `property('someProp', 'someValue', null, true)`).
These changes add a new instruction called `hostProperty` which avoids the need for the two parameters by removing `nativeOnly` which is always set and it allows us to omit `sanitizer` when it isn't being used.
These changes also remove the `nativeOnly` parameter from the `updateSyntheticHostBinding` instruction, because it's only generated for host elements which means that we can assume that its value will always be `true`.
PR Close#31550
Adds a new `elementContainer` instruction that can be used to avoid two instruction (`elementContainerStart` and `elementContainerEnd`) for `ng-container` that has text-only content. This is particularly useful when we have `ng-container` inside i18n sections.
This PR resolves FW-1105.
PR Close#31444
Adds chaining to the `property`, `attribute` and `updateSyntheticHostBinding` instructions when they're used in a host binding.
This PR resolves FW-1404.
PR Close#31296
Prior to this commit, the logic to extract query information from class fields used an instance of regular Error class to throw an error. As a result, some useful information (like reference to a specific field) was missing. Replacing Error class with FatalDiagnosticError one makes the error more verbose that should simplify debugging.
PR Close#31123
Currently each property binding generates an instruction like this:
```
property('prop1', ctx.value1);
property('prop2', ctx.value2);
```
The problem is that we're repeating the call to `property` for each of the properties. Since the `property` instruction returns itself, we can chain all of the calls which is more compact and it looks like this:
```
property('prop1', ctx.value1)('prop2', ctx.value2);
```
These changes implement the chaining behavior for regular property bindings and for synthetic ones, however interpolated ones are still handled like before, because they use a separate instruction.
This PR resolves FW-1389.
PR Close#31078
- Refactors compiler to stop generating `ɵɵselect(0)` instructions
- Alters template execution to always call the equivalent of `ɵɵselect(0)` before running a template in update mode
- Updates tests to not check for or call `ɵɵselect(0)`.
The goal here is to reduce the size of generated templates
PR Close#30830
Fixes Ivy throwing an error if it runs into an empty property binding on an `ng-template` (e.g. `<ng-template [something]=""></ng-template>`) by not generating an update instruction for it.
Fixes#30801.
This PR resoves FW-1356.
PR Close#30829
With View engine it was possible to declare multiple projection
definitions and to programmatically project nodes into the slots.
e.g.
```html
<ng-content></ng-content>
<ng-content></ng-content>
```
Using `ViewContainerRef#createComponent` allowed projecting
nodes into one of the projection defs (through index)
This no longer works with Ivy as the `projectionDef` instruction only
retrieves a list of selectors instead of also retrieving entries for
reserved projection slots which appear when using the default
selector multiple times (as seen above).
In order to fix this issue, the Ivy compiler now passes all
projection slots to the `projectionDef` instruction. Meaning that
there can be multiple projection slots with the same wildcard
selector. This allows multi-slot projection as seen in the
example above, and it also allows us to match the multi-slot node
projection order from View Engine (to avoid breaking changes).
It basically ensures that Ivy fully matches the View Engine behavior
except of a very small edge case that has already been discussed
in FW-886 (with the conclusion of working as intended).
Read more here: https://hackmd.io/s/Sy2kQlgTE
PR Close#30561
There is an encoding issue with using delta `Δ`, where the browser will attempt to detect the file encoding if the character set is not explicitly declared on a `<script/>` tag, and Chrome will find the `Δ` character and decide it is window-1252 encoding, which misinterprets the `Δ` character to be some other character that is not a valid JS identifier character
So back to the frog eyes we go.
```
__
/ɵɵ\
( -- ) - I am ineffable. I am forever.
_/ \_
/ \ / \
== == ==
```
PR Close#30546
Previously we defensively wrapped expressions in case they ran afoul of
precedence rules. For example, it would be easy to create the TS AST structure
Call(Ternary(a, b, c)), but might result in printed code of:
```
a ? b : c()
```
Whereas the actual structure we meant to generate is:
```
(a ? b : c)()
```
However the TypeScript renderer appears to be clever enough to provide
parenthesis as necessary.
This commit removes these defensive paraenthesis in the cases of binary
and ternary operations.
FW-1273
PR Close#30349
This is the final patch to migrate the Angular styling code to have a
smaller instruction set in preparation for the runtime refactor. All
styling-related instructions now work both in template and hostBindings
functions and do not use `element` as a prefix for their names:
BEFORE:
elementStyling()
elementStyleProp()
elementClassProp()
elementStyleMap()
elementClassMap()
elementStylingApply()
AFTER:
styling()
styleProp()
classProp()
styleMap()
classMap()
stylingApply()
PR Close#30318
This patch is one commit of many patches that will unify all styling instructions
across both template-level bindings and host-level bindings. This patch in particular
removes the `elementIndex` param because it is already set prior to each styling
instruction via the `select(n)` instruction.
PR Close#30313
Prior to this patch, the `select(n)` instruction would only be generated
when property bindings are encountered which meant that styling-related
bindings were skipped. This patch ensures that all styling-related bindings
(i.e. class and style bindings) are always prepended with a `select()`
instruction prior to being generated in AOT.
PR Close#30311
Doug Parker
crisbeto
Matias Niemelä
Miško Hevery
Andrew Scott
Andrew Kushnir
George Kalpakas
Kara Erickson
atscott
Ben Lesh
Paul Gschwendtner
Pete Bacon Darwin