This commit cleans up `expression_type.ts` by
1. Removing the unnecessary `TypeDiagnostic` class. It's replaced by
`ng.Diagnostic`.
2. Consolidating `reportError()` and `reportWarning()` to
`reportDiagnostic()`.
This is prep work so that we could make some of the type diagnostics a
suggestion in later PRs.
PR Close#35085
`TNode.directives` was introduced in https://github.com/angular/angular/pull/34938. Turns out that it is unnecessary because the information is already present it `TData` when combining with `TNode.directiveStart` and `TNode.directiveEnd`
Mainly this is true (conceptually):
```
expect(tNode.directives).toEqual(
tData.slice(
tNode.directivesStart,
tNode.directivesEnd - tNode.DirectivesStart -1
)
);
```
The refactoring removes `TNode.directives` and adds `TNode.directiveStyling` as we still need to keep location in the directive in `TNode`
PR Close#35050
These tests are used for perf testing and don't run as part of CI, as a result they bit-rotted. This fixes that. Long term these tests should be run as part of CI.
PR Close#35071
To support parallel CLI builds we instruct developers to pre-process
their node_modules via ngcc at the command line.
Despite doing this ngcc was still trying to set a lock when it was being
triggered by the CLI for packages that are not going to be processed,
since they are not compiled by Angular for instance.
This commit checks whether a target package needs to be compiled
at all before attempting to set the lock.
Fixes#35000
PR Close#35057
If ngcc gets updated to a new version then the artifacts
left in packages that were processed by the previous
version are possibly invalid.
Previously we just errored if we found packages that
had already been processed by an outdated version.
Now we automatically clean the packages that have
outdated artifacts so that they can be reprocessed
correctly with the current ngcc version.
Fixes#35082
PR Close#35079
Now `hasBeenProcessed()` will no longer throw if there
is an entry-point that has been built with an outdated
version of ngcc.
Instead it just returns `false`, which will include it in this
processing run.
This is a precursor to adding functionality that will
automatically revert outdate build artifacts.
PR Close#35079
Fixes issue with yarn_install not following yarn-path in .yarnrc when bazel run from yarn with `yarn bazel ...` (rules_nodejs: fix: unset YARN_IGNORE_PATH in yarn_install before calling yarn #1588)
PR Close#34961
Fixes#18013
Previously it was hard to debug an `expectOne` if the request had no match, as the error message was:
Expected one matching request for criteria "Match URL: /some-url?query=hello", found none.
This commit adds a bit more info to the error, by listing the actual requests received:
Expected one matching request for criteria "Match URL: /some-url?query=hello", found none. Requests received are: POST /some-url?query=world.
PR Close#27005
Previous to this commit, HTTP params like `{ a: '1', b: [], c: '3' }` resulted in a request like `a=1&&c=3` (note the double &&).
The ideal fix would probably be to stringify these params to `a=1&b=&c=3` like we do for empty string values. But that might be breaking as some APIs may rely on the absence of the parameter.
This fixes the issue in a compatible way by just removing the extra and unnecessary `&`, resulting in `a=1&c=3`.
PR Close#34896
This reverts commit cb142b6df9.
The intention of this commit was for a consumer of the `compile` function to
pass the `bazelHost` it returns into future invocations, reusing the
`FileCache` between them. However, first-party ngc_wrapped does not do this,
which caused a performance regression as the `FileCache` was no longer
shared between compilations.
PR Close#35063
Update from chokidar 2.x to 3.x in ngc/ngtsc, to eliminate any possibility
of a security issue with a downstream dependency of the package.
FW-1809 #resolve
PR Close#35047
This change changes the priority order of static styling.
Current priority:
```
(least priority)
- Static
- Component
- Directives
- Template
- Dynamic Binding
- Component
- Map/Interpolation
- Property
- Directives
- Map/Interpolation
- Property
- Template
- Map/Interpolation
- Property
(highest priority)
```
The issue with the above priority is this use case:
```
<div style="color: red;" directive-which-sets-color-blue>
```
In the above case the directive will win and the resulting color will be `blue`. However a small change of adding interpolation to the example like so. (Style interpolation is coming in https://github.com/angular/angular/pull/34202)
```
<div style="color: red; width: {{exp}}px" directive-which-sets-color-blue>
```
Changes the priority from static binding to interpolated binding which means now the resulting color is `red`. It is very surprising that adding an unrelated interpolation and style can change the `color` which was not changed. To fix that we need to make sure that the static values are associated with priority of the source (directive or template) where they were declared. The new resulting priority is:
```
(least priority)
- Component
- Static
- Map/Interpolation
- Property
- Directives
- Static
- Map/Interpolation
- Property
- Template
- Static
- Map/Interpolation
- Property
(highest priority)
```
PR Close#34938
The current logic pulls multiproviders up to the parent module's
provider list. The result is that the multi provider being defined both in
the imported ModuleWithProviders and the parent and getting an extra
item in the multi provided array of values. This PR fixes that problem
by not pulling providers in ModuleWithProviders up to the parent module.
PR Close#34914
The language service reports an error when a directive's template
context is missing a member that is being used in a template (e.g. if
`$implicit` is being used with a template context typed as `any`).
While this diagnostic message is valuable, typing template contexts
loosely as `any` or `object` is very widespread in community packages,
and often still compiles correctly, so reporting the diagnostic as an
error may be misleading to users.
This commit changes the diagnostic to be a warning, and adds additional
information about how the user can eliminate the warning entirely -- by
refining the template context type.
Closes https://github.com/angular/vscode-ng-language-service/issues/572
PR Close#35036
Sometimes, a request for definitions will return multiple of the same
definition. This can happen in at least the cases of
- two-way bindings (one of the same definition for the property and
event binding)
- multiple template binding expressions in the same attribute
- something like "*ngFor="let i of items; trackBy: test" has two
template bindings, resulting in two template binding ASTs at the
same location (the attribute span). The language service then parses
both of these bindings individually, resulting in two independent
but identical definitions. For more context, see https://github.com/angular/angular/pull/34847#discussion_r371006680.
This commit prunes duplicate definitions by signing definitions with
their location, and checking if that location signature has been seen in
a previous definition returned to the client.
PR Close#34995
In #34974 the top level dependency on `@babel/core` was bumped to
7.8.3. This commit ensures that the package.json that gets included
in the `@angular/localize` distributable is at the same version.
PR Close#35008
There are different `DebugNode`/`DebugElement` implementations (and
associated helper functions) for ViewEngine and Ivy. Additionally, these
classes/functions, which are defined inside the `core` package, are
imported by the `platform-browser` package.
Previously, this code was not tree-shaken as expected in Ivy. #30130
partially addressed the issue, but only for the case where `core` and
`platform-browser` end up in the same closure after webpack's scope
hoisting. In cases where this is not the case, our webpack/terser based
tooling is not capable of tree-shaking it.
This commit fixes the problem, by ensuring that the code retained in Ivy
mode (due to the cross-package import) does not unnecessarily reference
`DebugNode`/`DebugElement`, allowing the code to be tree-shaken away.
This results in a 7.6KB reduction in the size of the main angular.io
bundle.
Jira issue: [FW-1802](https://angular-team.atlassian.net/browse/FW-1802)
PR Close#35003
The message now gives concrete advice to developers who
experience the error due to running multiple simultaneous builds
via webpack.
Fixes#35000
PR Close#35001
This commit adds support for completions of properties on `$event`
variables in bound outputs.
This is the second major PR to support completions for `$event`
variables (https://github.com/angular/vscode-ng-language-service/issues/531).
The final completion support that must be provided is for `$event`
variables in bindings targeting DOM events, like `(click)`.
PR Close#34570
This commit makes `findOutputBinding` a utility function for the
language service, which will be used by the `expression_diagnostics`
module in #34570. Keeping the function in `locate_symbol` results in a
circular dependency between `expression_diagnostics` and
`locate_symbol`.
PR Close#34997
We had some logic for generating and passing in the `elIndex` parameter into the `hostBindings` function, but it wasn't actually being used for anything. The only place left that had a reference to it was the `StylingBuilder` and it only stored it without referencing it again.
PR Close#34969
Component's decorator handler exposes `preanalyze` method to preload async resources (templates, stylesheets). The logic in preanalysis phase may throw `FatalDiagnosticError` errors that contain useful information regarding the origin of the problem. However these errors from preanalysis phase were not intercepted in TraitCompiler, resulting in just error message text be displayed. This commit updates the logic to handle FatalDiagnosticError and transform it before throwing, so that the result diagnostic errors contain the necessary info.
PR Close#34801
For the structural directive, the 'path' will contain multiple `BoundDirectivePropertyAst` which depends on the number of directive property in the attribute value(e.g. '*ngFor="let item of []; trackBy: test;"', it has 2 `BoundDirectivePropertyAst`, 'ngForOf' and 'ngForTrackBy').
PR Close#34847
the test failures most likely result from the babel updates in the previous commit.
it does look like we lost the file path from the error message, which is something that we
should follow up no in a separate change.
PR Close#34974
Previously we relied on this package being hoisted and available, which is error prone and it would
be just a matter of time before the build would break due rehoisting of deps upon future npm package.json
changes.
PR Close#34974
It's not clear how this ever worked (npm hoisting is a suspect though), but this dep is required because
one of the tests imports @babel/generator in the ts sources.
The lack of this dep is breaking builds on the master branch.
More discussion about this issue on Slack: https://angular-team.slack.com/archives/C07DT5M6V/p1579934766007500
PR Close#34974
As part of the effort to tighten the API surface of
`TypeScriptServiceHost` in preparation for the migration to Ivy, I realized
some recently added APIs are not strictly needed.
They can be safely removed without sacrificing functionality.
This allows us to clean up the code, especially in the implementation of
QuickInfo, where the `TypeScriptServiceHost` is leaked outside of the
`LanguageService` class.
This refactoring also cleans up some duplicate code where the QuickInfo
object is generated. The logic is now consolidated into a simple
`createQuickInfo` method shared across two different implementations.
PR Close#34941
Previously we would write to class/style as strings `element.className` and `element.style.cssText`. Turns out that approach is good for initial render but not good for updates. Updates using this approach are problematic because we have to check to see if there was an out of bound write to style and than perform reconciliation. This also requires the browser to bring up CSS parser which is expensive.
Another problem with old approach is that we had to queue the DOM writes and flush them twice. Once on element advance instruction and once in `hostBindings`. The double flushing is expensive but it also means that a directive can observe that styles are not yet written (they are written after directive executes.)
The new approach uses `element.classList.add/remove` and `element.style.setProperty/removeProperty` API for updates only (it continues to use `element.className` and `element.style.cssText` for initial render as it is cheaper.) The other change is that the styling changes are applied immediately (no queueing). This means that it is the instruction which computes priority. In some circumstances it may result in intermediate writes which are than overwritten with new value. (This should be rare)
Overall this change deletes most of the previous code and replaces it with new simplified implement. The simplification results in code savings.
PR Close#34804
This change introduces several functions for manipulating items in an array in an efficient (binary search) way.
- `arraySplice` a faster version of `Array.splice()`.
- `arrayInsert` a faster version of `Array.splice(index, 0, value)`.
- `arrayInsert2` a faster version of `Array.splice(index, 0, value1, value2)`.
- `arrayInsertSorted` a way to insert a value into sorted list.
- `arrayRemoveSorted` a way to remove a value from a sorted list.
- `arrayIndexOfSorted` a way to find a value in a sorted list.
- `ArrayMap` Efficient implementation of `Map` as an `Array`.
- `arrayMapSet`, `arrayMapGet`, `arrayMapIndexOf`, and `arrayMapDelete` for manipulating `ArrayMap`s.
PR Close#34804
NOTE: This change must be reverted with previous deletes so that it code remains in build-able state.
This change deletes old styling code and replaces it with a simplified styling algorithm.
The mental model for the new algorithm is:
- Create a linked list of styling bindings in the order of priority. All styling bindings ere executed in compiled order and than a linked list of bindings is created in priority order.
- Flush the style bindings at the end of `advance()` instruction. This implies that there are two flush events. One at the end of template `advance` instruction in the template. Second one at the end of `hostBindings` `advance` instruction when processing host bindings (if any).
- Each binding instructions effectively updates the string to represent the string at that location. Because most of the bindings are additive, this is a cheap strategy in most cases. In rare cases the strategy requires removing tokens from the styling up to this point. (We expect that to be rare case)S Because, the bindings are presorted in the order of priority, it is safe to resume the processing of the concatenated string from the last change binding.
PR Close#34616
NOTE: This change deletes code and creates a BROKEN SHA. If reverting this SHA needs to be reverted with the next SHA to get back into a valid state.
PR Close#34616
This change reverts https://github.com/angular/angular/pull/28711
NOTE: This change deletes code and creates a BROKEN SHA. If reverting this SHA needs to be reverted with the next SHA to get back into a valid state.
The change removes the fact that `NgStyle`/`NgClass` is special and colaborates with the `[style]`/`[class]` to merge its styles. By reverting to old behavior we have better backwards compatiblity since it is no longer treated special and simply overwrites the styles (same as VE)
PR Close#34616
Compiler keeps track of number of slots (`vars`) which are needed for binding instructions. Normally each binding instructions allocates a single slot in the `LView` but styling instructions need to allocate two slots.
PR Close#34616
The `computeStaticStyling` will be used for computing static styling value during `firstCreatePass`.
The function takes into account static styling from the template as well as from the host bindings. The host bindings need to be merged in front of the template so that they have the correct priority.
PR Closes#34418
Parsing styling is now simplified to be used like so:
```
for (let i = parseStyle(text); i <= 0; i = parseStyleNext(text, i)) {
const key = getLastParsedKey();
const value = getLastParsedValue();
...
}
```
This change makes it easier to invoke the parser from other locations in the system without paying the cost of creating and iterating over `Map` of styles.
PR Closes#34418
This change moves information from instructions to declarative position:
- `ɵɵallocHostVars(vars)` => `DirectiveDef.hostVars`
- `ɵɵelementHostAttrs(attrs)` => `DirectiveDef.hostAttrs`
When merging directives it is necessary to know about `hostVars` and `hostAttrs`. Before this change the information was stored in the `hostBindings` function. This was problematic, because in order to get to the information the `hostBindings` would have to be executed. In order for `hostBindings` to be executed the directives would have to be instantiated. This means that the directive instantiation would happen before we had knowledge about the `hostAttrs` and as a result the directive could observe in the constructor that not all of the `hostAttrs` have been applied. This further complicates the runtime as we have to apply `hostAttrs` in parts over many invocations.
`ɵɵallocHostVars` was unnecessarily complicated because it would have to update the `LView` (and Blueprint) while existing directives are already executing. By moving it out of `hostBindings` function we can access it statically and we can create correct `LView` (and Blueprint) in a single pass.
This change only changes how the instructions are generated, but does not change the runtime much. (We cheat by emulating the old behavior by calling `ɵɵallocHostVars` and `ɵɵelementHostAttrs`) Subsequent change will refactor the runtime to take advantage of the static information.
PR Close#34683
This adds `insertTStyleValue` but does not hook it up to anything yet.
The purpose of this function is to create a linked-list of styling
related bindings. The bindings can be traversed during flush.
The linked list also keeps track of duplicates. This is important
for binding to know if it needs to check other styles for reconciliation.
PR Close#34004
This change introduces class/style reconciliation algorithm for DOM elements.
NOTE: The code is not yet hooked up, it will be used by future style algorithm.
Background:
Styling algorithm currently has [two paths](https://hackmd.io/@5zDGNGArSxiHhgvxRGrg-g/rycZk3N5S)
when computing how the style should be rendered.
1. A direct path which concatenates styling and uses `elemnent.className`/`element.style.cssText` and
2. A merge path which uses internal data structures and uses `element.classList.add/remove`/`element.style[property]`.
The situation is confusing and hard to follow/maintain. So a future PR will remove the merge-path and do everything with
direct-path. This however breaks when some other code adds class or style to the element without Angular's knowledge.
If this happens instead of switching from direct-path to merge-path algorithm, this change provides a different mental model
whereby we always do `direct-path` but the code which writes to the DOM detects the situation and reconciles the out of bound write.
The reconciliation process is as follows:
1. Detect that no one has modified `className`/`cssText` and if so just write directly (fast path).
2. If out of bounds write did occur, switch from writing using `className`/`cssText` to `element.classList.add/remove`/`element.style[property]`.
This does require that the write function computes the difference between the previous Angular expected state and current Angular state.
(This requires a parser. The advantage of having a parser is that we can support `style="width: {{exp}}px" kind of bindings.`)
Compute the diff and apply it in non destructive way using `element.classList.add/remove`/`element.style[property]`
Properties of approach:
- If no out of bounds style modification:
- Very fast code path: Just concatenate string in right order and write them to DOM.
- Class list order is preserved
- If out of bounds style modification detected:
- Penalty for parsing
- Switch to non destructive modification: `element.classList.add/remove`/`element.style[property]`
- Switch to alphabetical way of setting classes.
PR Close#34004
Fixes Ivy detecting changes inside child embedded views, even though they're detached.
Note that there's on subtlety here: I made the changes inside `refreshDynamicEmbeddedViews` rather than `refreshView`, because we support detecting changes on a detached view (evidenced by a couple of unit tests), but only if it's triggered directly from the view's `ChangeDetectorRef`, however we shouldn't be detecting changes in the detached child view when something happens in the parent.
Fixes#34816.
PR Close#34846
Previously, NgtscProgram lived in the main @angular/compiler-cli package
alongside the legacy View Engine compiler. As a result, the main package
depended on all of the ngtsc internal packages, and a significant portion of
ngtsc logic lived in NgtscProgram.
This commit refactors NgtscProgram and moves the main logic of compilation
into a new 'core' package. The new package defines a new API which enables
implementers of TypeScript compilers (compilers built using the TS API) to
support Angular transpilation as well. It involves a new NgCompiler type
which takes a ts.Program and performs Angular analysis and transformations,
as well as an NgCompilerHost which wraps an input ts.CompilerHost and adds
any extra Angular files.
Together, these two classes are used to implement a new NgtscProgram which
adapts the legacy api.Program interface used by the View Engine compiler
onto operations on the new types. The new NgtscProgram implementation is
significantly smaller and easier to reason about.
The new NgCompilerHost replaces the previous GeneratedShimsHostWrapper which
lived in the 'shims' package.
A new 'resource' package is added to support the HostResourceLoader which
previously lived in the outer compiler package.
As a result of the refactoring, the dependencies of the outer
@angular/compiler-cli package on ngtsc internal packages are significantly
trimmed.
This refactoring was driven by the desire to build a plugin interface to the
compiler so that tsc_wrapped (another consumer of the TS compiler APIs) can
perform Angular transpilation on user request.
PR Close#34887
Right now, if an Angular diagnostic is generated for a TypeScript node,
the span points to the decorator Identifier, i.e. the Identifier node
like `@NgModule`, `@Component`, etc.
This is weird. It should point to the class name instead.
Note, we do not have a more fine-grained breakdown of the span when
diagnostics are emitted, this work remains to be done.
PR Close#34932
In #34288, ngtsc was refactored to separate the result of the analysis
and resolve phase for more granular incremental rebuilds. In this model,
any errors in one phase transition the trait into an error state, which
prevents it from being ran through subsequent phases. The ngcc compiler
on the other hand did not adopt this strict error model, which would
cause incomplete metadata—due to errors in earlier phases—to be offered
for compilation that could result in a hard crash.
This commit updates ngcc to take advantage of ngtsc's `TraitCompiler`,
that internally manages all Ivy classes that are part of the
compilation. This effectively replaces ngcc's own `AnalyzedFile` and
`AnalyzedClass` types, together with all of the logic to drive the
`DecoratorHandler`s. All of this is now handled in the `TraitCompiler`,
benefiting from its explicit state transitions of `Trait`s so that the
ngcc crash is a thing of the past.
Fixes#34500
Resolves FW-1788
PR Close#34889
This syntax is invalid in these source files and does result in
compilation errors as the constructor parameters could not be resolved.
This hasn't been an issue until now as those errors were ignored in the
tests, but future work to introduce the Trait system of ngtsc into
ngcc will cause these errors to prevent compilation, resulting in broken
tests.
PR Close#34889
Previously, while trying to build an `NgccReflectionHost`'s
`privateDtsDeclarationMap`, `computePrivateDtsDeclarationMap()` would
try to collect exported declarations from all source files of the
program (i.e. without checking whether they were within the target
package, as happens for declarations in `.d.ts` files).
Most of the time, that would not be a problem, because external packages
would be represented as `.d.ts` files in the program. But when an
external package had no typings, the JS files would be used instead. As
a result, the `ReflectionHost` would try to (unnecessarilly) parse the
file in order to extract exported declarations, which in turn would be
harmless in most cases.
There are certain cases, though, where the `ReflectionHost` would throw
an error, because it cannot parse the external package's JS file. This
could happen, for example, in `UmdReflectionHost`, which expects the
file to contain exactly one statement. See #34544 for more details on a
real-world failure.
This commit fixes the issue by ensuring that
`computePrivateDtsDeclarationMap()` will only collect exported
declarations from files within the target package.
Jira issue: [FW-1794](https://angular-team.atlassian.net/browse/FW-1794)
Fixes#34544
PR Close#34811
The value changes emitted additionally when enable disable were called
documented the above behaviour in AbstractControl class documentaion
Fixes#34407
PR Close#34497
This commit fixes a bug in the incremental rebuild engine of ngtsc, where if
a component was removed from its NgModule, it would not be properly
re-emitted.
The bug stemmed from the fact that whether to emit a file was a decision
based purely on the updated dependency graph, which captures the dependency
structure of the rebuild program. This graph has no edge from the component
to its former module (as it was removed, of course), so the compiler
erroneously decides not to emit the component.
The bug here is that the compiler does know, from the previous dependency
graph, that the component file has logically changed, since its previous
dependency (the module file) has changed. This information was not carried
forward into the set of files which need to be emitted, because it was
assumed that the updated dependency graph was a more accurate source of that
information.
With this commit, the set of files which need emit is pre-populated with the
set of logically changed files, to cover edge cases like this.
Fixes#34813
PR Close#34912
It was previously defined in core without being exposed publicly, whereas `getLocaleCurrencyName` and `getLocaleCurrencySymbol` were defined in common, and publicly exposed.
This commit now privately exposes `ɵgetLocaleCurrencyCode` from core, and reexports it publicly from common.
PR Close#34810
This commit elaborates diagnostics produced for invalid template
contexts by including the name of the embedded template type using the
template context, and in the common case that the implicity property is
being referenced (e.g. in a `for .. of ..` expression), suggesting to
refine the type of the context. This suggestion is provided because
users will sometimes use a base class as the type of the context in the
embedded view, and a more specific context later on (e.g. in an
`ngOnChanges` method).
Closes https://github.com/angular/vscode-ng-language-service/issues/251
PR Close#34751
Previously, the template type-checker would always construct a generic
template context type with correct bounds, even when strictTemplates was
disabled. This meant that type-checking of expressions involving that type
was stricter than View Engine.
This commit introduces a 'strictContextGenerics' flag which behaves
similarly to other 'strictTemplates' flags, and switches the inference of
generic type parameters on the component context based on the value of this
flag.
PR Close#34649
FileToModuleHost aliasing supports compilation within environments that have
two properties:
1. A `FileToModuleHost` exists which defines canonical module names for any
given TS file.
2. Dependency restrictions exist which prevent the import of arbitrary files
even if such files are within the .d.ts transitive closure of a
compilation ("strictdeps").
In such an environment, generated imports can only go through import paths
which are already present in the user program. The aliasing system supports
the generation and consumption of such imports at runtime.
`FileToModuleHost` aliasing does not emit re-exports in .d.ts files. This
means that it's safe to rely on alias re-exports in generated .js code (they
are guaranteed to exist at runtime) but not in template type-checking code
(since TS will not be able to follow such imports). Therefore, non-aliased
imports should be used in template type-checking code.
This commit adds a `NoAliasing` flag to `ImportFlags` and sets it when
generating imports in template type-checking code. The testing environment
is also patched to support resolution of FileToModuleHost canonical paths
within the template type-checking program, enabling testing of this change.
PR Close#34649
Previously, `ReferenceEmitter.emit()` took an `ImportMode` enum value, where
one value of the enum allowed forcing new imports to be generated when
emitting a reference to some value or type.
This commit refactors `ImportMode` to be an `ImportFlags` value instead.
Using a bit field of flags will allow future customization of reference
emitting.
PR Close#34649
Previously, when generating template type-checking code, casts to 'any' were
produced as `expr as any`, regardless of the expression. However, for
certain expression types, this led to precedence issues with the cast. For
example, `a !== b` is a `ts.BinaryExpression`, and wrapping it directly in
the cast yields `a !== b as any`, which is semantically equivalent to
`a !== (b as any)`. This is obviously not what is intended.
Instead, this commit adds a list of expression types for which a "bare"
wrapping is permitted. For other expressions, parentheses are added to
ensure correct precedence: `(a !== b) as any`
PR Close#34649
Currently, the template type-checker gives an error if there are multiple
bindings to the same input. This commit aligns the behavior of the template
type-checker with the View Engine runtime: only the first binding to a field
has any effect. The rest are ignored.
PR Close#34649
It's possible to declare multiple inputs for a directive/component which all
map to the same property name. This is usually done in error, as only one of
any bindings to the property will "win".
In the template type-checker, an error was previously being raised as a
result of this ambiguity. Specifically, a type constructor was produced
which required a binding for each field, but only one of the fields had
a value via the binding. TypeScript would (rightfully) error on missing
values for the remaining fields. This ultimately was happening when the
code which generated the default values for "unset" inputs belonging to
directives or pipes used the final mapping from properties to fields as
a source for field names.
Instead, this commit uses the original list of fields to generate unset
input values, which correctly provides values for fields which shared a
property name but didn't receive the final binding.
PR Close#34649
Consider a library that uses a shared constant for host bindings. e.g.
```ts
export const BASE_BINDINGS= {
'[class.mat-themed]': '_isThemed',
}
----
@Directive({
host: {...BASE_BINDINGS, '(click)': '...'}
})
export class Dir1 {}
@Directive({
host: {...BASE_BINDINGS, '(click)': '...'}
})
export class Dir2 {}
```
Previously when these components were shipped as part of the
library to NPM, consumers were able to consume `Dir1` and `Dir2`.
No errors showed up.
Now with Ivy, when ngcc tries to process the library, an error
will be thrown. The error is stating that the host bindings should
be an object (which they obviously are). This happens because
TypeScript transforms the object spread to individual
`Object.assign` calls (for compatibility).
The partial evaluator used by the `@Directive` annotation handler
is unable to process this expression because there is no
integrated support for `Object.assign`. In View Engine, this was
not a problem because the `metadata.json` files from the library
were used to compute the host bindings.
Fixes#34659
PR Close#34661
Ngcc adds properties to the `package.json` files of the entry-points it
processes to mark them as processed for a format and point to the
created Ivy entry-points (in case of `--create-ivy-entry-points`). When
running ngcc in parallel mode (which is the default for the standalone
ngcc command), multiple formats can be processed simultaneously for the
same entry-point and the order of completion is not deterministic.
Previously, ngcc would append new properties at the end of the target
object in `package.json` as soon as the format processing was completed.
As a result, the order of properties in the resulting `package.json`
(when processing multiple formats for an entry-point in parallel) was
not deterministic. For tools that use file hashes for caching purposes
(such as Bazel), this lead to a high probability of cache misses.
This commit fixes the problem by ensuring that the position of
properties added to `package.json` files is deterministic and
independent of the order in which each format is processed.
Jira issue: [FW-1801](https://angular-team.atlassian.net/browse/FW-1801)
Fixes#34635
PR Close#34870
This commit adds a regression test to check that the language service
recognizes inputs and outputs declared in a directive decorator.
See #34874.
PR Close#34875
In Angular, symbol can have multiple definitions (e.g. a two-way
binding). This commit adds support for for multiple definitions for a
queried location in a template.
PR Close#34782
by DebugElement.triggerEventHandler. ZoneJS tracks the eventListeners on
a node but we need to be able to differentiate between those added by
Angular and those that were added outside the Angular context. This fix
aligns with the behavior that was present in View Engine (not calling
those listeners). If we decide later that we want to call those
listeners, we still need a way to differentiate between those that
we have wrapped in dom_renderer and those that were not (because they
were added outside the Angular context).
PR Close#34514
The Angular CLI will continue to call ngcc on all possible packages, even if they
have already been processed by ngcc in a postinstall script.
In a parallel build environment, this was causing ngcc to complain that it was
being run in more than one process at the same time.
This commit moves the check for whether the targeted package has been
processed outside the locked code section, since there is no issue with
multiple ngcc processes from doing this check.
PR Close#34722
Previously, it was possible for multiple instance of ngcc to be running
at the same time, but this is not supported and can cause confusing and
flakey errors at build time.
Now, only one instance of ngcc can run at a time. If a second instance
tries to execute it fails with an appropriate error message.
See https://github.com/angular/angular/issues/32431#issuecomment-571825781
PR Close#34722
This commit adds an `exclusive` parameter to the
`FileSystem.writeFile()` method. When this parameter is
true, the method will fail with an `EEXIST` error if the
file already exists on disk.
PR Close#34722
Fixes Ivy throwing an error when trying to access the `DebugNode.classes` of an SVG element. The problem is that the `className` of an SVG element is an `SVGAnimatedString`, rather than a plain string.
Fixes#34868.
PR Close#34872
This commit makes the Angular Language Service interface a strict subset
of TypeScript's Language Service by renaming all methods to be
consistent with TypeScript's.
The custom Angular `LanguageService` interface was needed before the
inception of TypeScript tsserver plugin, but is now obsolete since
Angular LS is a proper tsserver plugin.
This allows us to easily adapt to upstream TS changes in the future, and
also allows us to reuse all data types defined in TypeScript.
PR Close#34888
This patch removes the need for the styleSanitizer() instruction in
favor of passing the sanitizer into directly into the styleProp
instruction.
This patch also increases the binding index size for all style/class bindings in preparation for #34418
PR Close#34480
Pipes in host binding expressions are not supported in View Engine and Ivy, but in some more complex cases (like `(value | pipe) === true`) compiler was not reporting errors. This commit extends Ivy logic to detect pipes in host binding expressions and throw in cases bindings are present. View Engine behavior remains the same.
PR Close#34655
In #28162 we introduced an extra `removeNode` call for host elements which can cause the parent element to be removed before all child animations have finished. The issue is only in Ivy, because that the only place where we pass in the `isHostElement` flag. These changes fix the issue by not re-triggering the removal logic if the element has in-progress animations.
Fixes#33597.
PR Close#34702
Before ivy it was possible to configure a mutable service value
in an application initializer (by providing an `APP_INITIALIZER`)
that could be read in the provider of `LOCALE_ID`. This is a common
scenario if you wanted to load the locale id asynchronously from
an HTTP request for instance.
When using the ivy, the runtime needs to be told what the current
locale is, which is done by calling the `setLocaleId()` function with
the value injected by the `LOCALE_ID` token. Previously this was
being done before the application initializers were run, which meant
that the `LOCALE_ID` provider was being executed before the
app initializers had a chance to get a new value for it.
Now this initalization of the locale for the ivy runtime is done after the
application initializers have been run.
Closes#34701
PR Close#34830
Since I was learning the codebase and had a hard time understanding what was going on I've done a
bunch of changes in one commit that under normal circumstances should have been split into several
commits. Because this code is likely going to be overwritten with Misko's changes I'm not going to
spend the time with trying to split this up.
Overall I've done the following:
- I processed review feedback from #34307
- I did a bunch of renaming to make the code easier to understand
- I refactored some internal functions that were either inefficient or hard to read
- I also updated lots of type signatures to correct them and to remove many casts in the code
PR Close#34307
Prior to this change, in Ivy mode ngStyle/ngClass would accidentally emit value changes for static
(string-based) values even if the value itself had not changed. This patch ensures that
the style/class diffing code is more strict and when it signals ngClass/ngStyle that there has been
a value change.
Fixes#34336, #34444
PR Close#34307
remove unnecessary underscore suffix and the corresponding TODO comments,
because the rollup bug was fixed: github.com/rollup/rollup/issues/2047
PR Close#34757
Typescript 3.7 now emits d.ts files for getters differently than prior versions,
and there seems to be a bug in how it strips private types without replacing them
with explicit 'any' type. This then leads to compilation failures in projects compiled
against our packages that don't have skipLibCheck turned on but do have strict or
noImplicitAny check on.
I'm working around this by marking the affected getters as @internal and
adding a test to prevent future regressions.
I believe this is a TypeScript bug, and I filed a bug report:
https://github.com/microsoft/TypeScript/issues/36216
PR Close#34798
This release resolves the bootstrap require patching issue with jasmine_node_test. Require patches are now included before any bootstrap scripts.
PR Close#34736
This is recommended in the Bazel docs as $(location) is ambiguous and can mean either $(execpath) or $(rootpath) depending on the context.
PR Close#34736
This brings in a few minor fixes including a better way to patch require for bootstrap scripts
Also remove install_source_map_support attribute from nodejs_binary targets This attribute will be removed from nodejs_binary in the future
PR Close#34736
For the purposes of the integration test the zone.js script & bundle script tags can just go into the source index.html itself. The purpose of the integration test is is to test @angular/bazel & ng_module & ng_package so there is no need to exercise html_insert_assets in integration/bazel.
PR Close#34736
The major one that affects the angular repo is the removal of the bootstrap attribute in nodejs_binary, nodejs_test and jasmine_node_test in favor of using templated_args --node_options=--require=/path/to/script. The side-effect of this is that the bootstrap script does not get the require.resolve patches with explicitly loading the targets _loader.js file.
PR Close#34736
When searching the typings program for a package for imports a
distinction is drawn between missing entry-points and deep imports.
Previously in the `DtsDependencyHost` these deep imports may be
marked as missing if there was no typings file at the deep import path.
Instead there may be a javascript file instead. In practice this means
the import is "deep" and not "missing".
Now the `DtsDependencyHost` will also consider `.js` files when checking
for deep-imports, and it will also look inside `@types/...` for a suitable
deep-imported typings file.
Fixes#34720
PR Close#34695
Refactored Bazel host creation to export some of the relevant utility functions. google3 needs to make some modifications to the Bazel host to enable the Ivy migration. The functionality exported here is still needed in g3, but it allows g3 code to create the Bazel host, make necessary modifications, and then provide it to the external codebase here while everything is still compatible. For external users, this is a no-op.
PR Close#34686
Currently ngtsc looks for the first `ConstructorDeclaration` when figuring out what the parameters are so that it can generate the DI instructions. The problem is that if a constructor has overloads, it'll have several `ConstructorDeclaration` members with a different number of parameters. These changes tweak the logic so it looks for the constructor implementation.
PR Close#34590
Both `MinLengthValidator` and `MaxLengthValidator` accepted only string inputs for the length required, which throws with Ivy and `fullTemplateTypeCheck` enabled:
<!-- min = 2 in the component -->
<input [minlength]="min">
with:
Type 'number' is not assignable to type 'string | undefined'
This relaxes the accepted type to `string | number` to avoid breakage when developers switch to Ivy and fTTC.
PR Close#32057
The Template AST that corresponds to a given HTML AST is not always
complete, and often has to be reconstructed. This commit refactors the
code to make it easier to adapt to multiple cases.
PR Close#34764
Adds a `typeArguments` method to the `Symbol` interface, cleaning up how
type parameters of a TypeScript type are currently found. This will be
necessary for providing completions for `$event` variables' properties
(#34570).
This commit also performs some fly-by cleanups seen while implementing
the `typeArguments` methods. There is more clean up to do in the
`typescript_symbols` file, but the scope of this commit didn't need to
get larger.
PR Close#34571
Currently the language service constructs an `AttrAst` anytime it is
missing from a `TemplateAst` path. However, this should only be done
when the path does not contain an "attribute-like" AST, which can
includes bound properties or bound events.
This commit also refactors `visitAttr` to parse bindings only for
microsyntax expressions and does some other minor cleanup to make
linters happy.
This is some cleanup to help the language service eventually use
`BoundDirectivePropertyAst`s for providing completions for template
bindings rather than performing the manual parsing currently done.
PR Close#34743
DebugElement.query also matches elements that may have been created
outside of Angular (ex: with `document.appendChild`). If those matched
DebugElements are in turn used to query for more elements, an error
occurs because the first step in queryAll is to load the LContext.
PR Close#34687
The locale data extraction has been modified to include the default
currency code in the generated locale data. This commit updates these
generated files accordingly.
PR Close#32584
Default currency code in CurrencyPipe is currently hardcoded to USD
and is not configurable. This commit allows the default currency code
to be configurable by adding a DEFAULT_CURRENCY_CODE injection token.
Example:
```
providers: [{ provide: DEFAULT_CURRENCY_CODE, useValue: "GBP" }]
...
{{ 123.45 | currency }} // outputs £123.45 as opposed to always $123.45 before
```
Closes: #25461
PR Close#32584
Previously, `CommonJsDependencyHost.collectDependencies()` would only
find dependencies via imports of the form `var foo = require('...');` or
`var foo = require('...'), bar = require('...');` However, CommonJS
files can have imports in many different forms. By failing to recognize
other forms of imports, the associated dependencies were missed, which
in turn resulted in entry-points being compiled out-of-order and failing
due to that.
While we cannot easily capture all different types of imports, this
commit enhances `CommonJsDependencyHost` to recognize the following
common forms of imports:
- Imports in property assignments. E.g.:
`exports.foo = require('...');` or
`module.exports = {foo: require('...')};`
- Imports for side-effects only. E.g.:
`require('...');`
- Star re-exports (with both emitted and imported heleprs). E.g.:
`__export(require('...'));` or
`tslib_1.__exportStar(require('...'), exports);`
PR Close#34528
Unlike in View Engine, we currently reset the dirty state of
components in the check no changes change detection cycle.
This means that components cannot be marked as dirty from
view lifecycle hooks because the dirty state is reset and
the lifecycle hooks do not run in the check no changes CD cycle.
PR Close#34495
Currently the decorator handlers are run against all `SourceFile`s in the compilation, but we shouldn't be doing it against declaration files. This initially came up as a CI issue in #33264 where it was worked around only for the `DirectiveDecoratorHandler`. These changes move the logic into the `TraitCompiler` and `DecorationAnalyzer` so that it applies to all of the handlers.
PR Close#34557
This commit removes some test scenarios from `parsing-cases.ts` and
colocate them with the test code instead. This makes the tests easier to
read and understand.
PR Close#34716
This is recommended in the Bazel docs as $(location) is ambiguous and can mean either $(execpath) or $(rootpath) depending on the context.
PR Close#34589
For the purposes of the integration test the zone.js script & bundle script tags can just go into the source index.html itself. The purpose of the integration test is is to test @angular/bazel & ng_module & ng_package so there is no need to exercise html_insert_assets in integration/bazel.
PR Close#34589
The major one that affects the angular repo is the removal of the bootstrap attribute in nodejs_binary, nodejs_test and jasmine_node_test in favor of using templated_args --node_options=--require=/path/to/script. The side-effect of this is that the bootstrap script does not get the require.resolve patches with explicitly loading the targets _loader.js file.
PR Close#34589
This commit renames `addAttributeValuesToCompletions`, which generates
expression completions and is not exclusive to processing attributes, to
`processExpressionCompletions`. Also removes the expression completion
logic in `visitBoundText` for a call to `processExpressionCompletions`.
The conditional branch in `visitBoundText` is also removed. This branch
was added in one of the first commits to the language service
(519a324454) and appears to be
unnecessary, as the expression AST is constructed from the template
position anyway.
PR Close#34518
Previously, the `CommonJsReflectionHost` and `UmdReflectionHost` would
only recognize re-exports of the form `__export(...)`. This is what
re-exports look like, when the TypeScript helpers are emitted inline
(i.e. when compiling with the default [TypeScript compiler options][1]
that include `noEmitHelpers: false` and `importHelpers: false`).
However, when compiling with `importHelpers: true` and [tslib][2] (which
is the recommended way for optimized bundles), the re-exports will look
like: `tslib_1.__exportStar(..., exports)`
These types of re-exports were previously not recognized by the
CommonJS/UMD `ReflectionHost`s and thus ignored.
This commit fixes this by ensuring both re-export formats are
recognized.
[1]: https://www.typescriptlang.org/docs/handbook/compiler-options.html
[2]: https://www.npmjs.com/package/tslib
PR Close#34527
A while ago we made a pass through all instructions to make sure that none of them call directly into other instructions, however it seems like missed the `pipeBind*` since they still call into the pure functions. The result is that we have some unnecessary duplicated accesses of global state like `getLView` which are called twice in a row with nothing changing.
These changes move the common functionality into a shared file and make the pipe instructions call into them with the global state instead.
PR Close#33714
The compiler's `I18NHtmlParser` may expand template nodes that have
internationalization metadata attached to them; for instance,
```html
<div i18n="@@i18n-el">{{}}</div>
```
gets expanded to an AST with the i18n metadata extracted and text filled
in as necessary; to the language service, the template above, as read in
the AST, now looks something like
```html
<div>{{$implicit}}</div>
```
This is undesirable for the language service because we want to preserve
the original form of the source template source code, and have
information about the original values of the template. The language
service also does not need to use an i18n parser -- we don't generate
any template output.
To fix this turns out to be as easy as moving to using a raw
`HtmlParser`.
---
A note on the testing strategy: as mentioned above, we don't need to use
an i18n parser, but we don't **not** need to use one if the parser
does not heavily modify the template AST. For this reason, the tests
target the functionality of not modifying a template with i18n metadata
rather than testing that the language service does not use an i18n parser.
---
Closes https://github.com/angular/vscode-ng-language-service/issues/272
PR Close#34531
With 5cecd97493 we intended to expand
the input type of the `disabled` input of the `NgModel` directive.
Read more about the reason for this in the actual commit message.
Currently though, the acceptance coercion member does not have any
effect. This is because the acceptance member needs to refer to the
actual input property name, and not to the public input name.
`disabled` corresponds to the `isDisabled` property.
PR Close#34502
This commit improves `ExpressionChangedAfterChecked` error message for attributes by including attribute name and the content of the entire expression that contains interpolation(s). In order to achieve that, metadata is now stored in `TData` array when `attribute` and `attributeInterpolate` instructions are being called (similar to `property` and `propertyInterpolate` instructions).
PR Close#34505
If a class was defined as a class expression
in a variable declaration, the definitions
were being inserted before the statment's
final semi-colon.
Now the insertion point will be after the
full statement.
Fixes#34648
PR Close#34677
This was already the default. I'm working on a change in the underlying TS rules where this parameter will be replaced, so ng_module needs to change first
PR Close#34665
In some cases, where a module imports a dependency
but does not actually use it, UMD bundlers may remove
the dependency parameter from the UMD factory function
definition.
For example:
```
import * as x from 'x';
import * as z from 'z';
export const y = x;
```
may result in a UMD bundle including:
```
(function (global, factory) {
typeof exports === 'object' && typeof module !== 'undefined' ?
factory(exports, require('x'), require('z')) :
typeof define === 'function' && define.amd ?
define(['exports', 'x', 'z'], factory) :
(global = global || self, factory(global.myBundle = {}, global.x));
}(this, (function (exports, x) { 'use strict';
...
})));
```
Note that while the `z` dependency is provide in the call,
the factory itself only accepts `exports` and `x` as parameters.
Previously ngcc appended new dependencies to the end of the factory
function, but this breaks in the above scenario. Now the new
dependencies are prefixed at the front of parameters/arguments
already in place.
Fixes#34653
PR Close#34660
In some cases TypeScript is unable to identify a valid
symbol for an export. In this case it returns an "unknown"
symbol, which does not reference any declarations.
This fix ensures that ngcc does not crash if such a symbol
is encountered by checking whether `symbol.declarations`
exists before accessing it.
The commit does not contain a unit test as it was not possible
to recreate a scenario that had such an "unknown" symbol in
the unit test environment. The fix has been manually checked
against that original issue; and also this check is equivalent to
similar checks elsewhere in the code, e.g.
https://github.com/angular/angular/blob/8d0de89e/packages/compiler-cli/src/ngtsc/reflection/src/typescript.ts#L309Fixes#34560
PR Close#34658
Fixes classes with trailing or leading space that are passed to `ngClass` (e.g. `{'foo ': bar}`) not being applied in Ivy. The issue comes from the fact that when the styling differ builds up the style map it uses the trimmed key to look up the value in the map that uses non-trimmed keys.
Fixes#34476.
PR Close#34539
Follow-up from [this discussion](https://github.com/angular/angular/pull/33419#discussion_r339296216). In Ivy we don't use the schema to validate tag names, but instead we use feature detection to figure out whether an element is supported. While this should generally be more accurate, it'll also end up throwing for some more innocent cases. E.g. now Ivy throws an error for `main` elements in IE which is accurate since IE doesn't support the element, but is annoying since there is no functionality attached.
These changes switch to logging a warning instead, similarly to what we're doing for unknown properties.
PR Close#34524
Previously, in cases were values were expensive to compute and would be
used multiple times, a combination of a regular `Map` and a helper
function (`getOrDefault()`) was used to ensure values were only computed
once.
This commit uses a special `Map`-like structure to compute and memoize
such expensive values without the need to a helper function.
PR Close#34512
This change should not have any impact on the code's behavior (based on
how the function is currently used), but it will avoid unnecessary work.
PR Close#34512
While different, CommonJS and UMD have a lot in common regarding the
their exports are constructed. Therefore, there was some code
duplication between `CommonJsReflectionHost` and `UmdReflectionHost`.
This commit extracts some of the common bits into a separate file as
helpers to allow reusing the code in both `ReflectionHost`s.
PR Close#34512
Previously, `UmdReflectionHost` would only recognize re-exports of the
form `__export(someIdentifier)` and not `__export(require('...'))`.
However, it is possible in some UMD variations to have the latter format
as well. See discussion in https://github.com/angular/angular/pull/34254/files#r359515373
This commit adds support for re-export of the form
`__export(require('...'))` in UMD.
PR Close#34512
This fix was part of a broader `ngtsc`/`ngcc` fix in 02bab8cf9 (see
there for details). In 02bab8cf9, the fix was only applied to
`CommonJsReflectionHost`, but it is equally applicable to
`UmdReflectionHost`. Later in #34254, the fix was partially ported to
`UmdReflectionHost` by fixing the `extractUmdReexports()` method.
This commit fully fixes `ngcc`'s handling of inline exports for code in
UMD format.
PR Close#34512
The `getProjectAsAttrValue` in `node_selector_matcher` finds the
ProjectAs marker and then additionally checks that the marker appears in
an even index of the node attributes because "attribute names are stored
at even indexes". This is true for "regular" attribute bindings but
classes, styles, bindings, templates, and i18n do not necessarily follow
this rule because there can be an uneven number of them, causing the
next "special" attribute "name" to appear at an odd index. To address
this issue, ensure ngProjectAs is placed right after "regular"
attributes.
PR Close#34617
Previously, if `UmdRenderingFormatter#addImports()` was called with an
empty list of imports to add (i.e. no new imports were needed), it would
add trailing commas in several locations (arrays, function arguments,
function parameters), thus making the code imcompatible with legacy
browsers such as IE11.
This commit fixes it by ensuring that no trailing commas are added if
`addImports()` is called with an empty list of imports.
This is a follow-up to #34353.
Fixes#34525
PR Close#34545
ngcc computes a dependency graph of entry-points to ensure that
entry-points are processed in the correct order. Previously only the imports
in source files were analysed to determine the dependencies for each
entry-point.
This is not sufficient when an entry-point has a "type-only" dependency
- for example only importing an interface from another entry-point.
In this case the "type-only" import does not appear in the
source code. It only appears in the typings files. This can cause a
dependency to be missed on the entry-point.
This commit fixes this by additionally processing the imports in the
typings program, as well as the source program.
Note that these missing dependencies could cause unexpected flakes when
running ngcc in async mode on multiple processes due to the way that
ngcc caches files when they are first read from disk.
Fixes#34411
// FW-1781
PR Close#34494
The `DependencyHost` implementations were duplicating the "postfix" strings
which are used to find matching paths when resolving module specifiers.
Now the hosts reuse the postfixes given to the `ModuleResolver` that is
passed to the host.
PR Close#34494
Rather than return a new object of dependency info from calls to
`collectDependencies()` we now pass in an object that will be updated
with the dependency info. This is in preparation of a change where
we will collect dependency information from more than one
`DependencyHost`.
Also to better fit with this approach the name is changed from
`findDependencies()` to `collectDependencies()`.
PR Close#34494
Prior to this commit, there were no `advance` instructions generated before `i18nExp` instructions and as a result, lifecycle hooks for components used inside i18n blocks were flushed too late. This commit adds the logic to generate `advance` instructions in front of `i18nExp` ones (similar to what we have in other places like interpolations, property bindings, etc), so that the necessary lifecycle hooks are flushed before expression value is captured.
PR Close#34436
The main logic of the `InheritDefinitionFeature` is to go through the prototype chain of a given Component and merge all Angular-specific information onto that Component def. The problem happens in case there is a Component in a hierarchy that also contains the `InheritDefinitionFeature` (i.e. it extends some other Component), so it inherits all Angular-specific information from its super class. As a result, the root Component may end up having duplicate information inherited from different Components in hierarchy.
Let's consider the following structure: `GrandChild` extends `Child` that extends `Base` and the `Base` class has a `HostListener`. In this scenario `GrandChild` and `Child` will have `InheritDefinitionFeature` included into the `features` list. The processing will happend in the following order:
- `Child` inherits `HostListener` from the `Base` class
- `GrandChild` inherits `HostListener` from the `Child` class
- since `Child` has a parent, `GrandChild` also inherits from the `Base` class
The result is that the `GrandChild` def has duplicated host listener, which is not correct.
This commit introduces additional logic that checks whether we came across a def that has `InheritDefinitionFeature` feature (which means that this def already inherited information from its super classes). If that's the case, we skip further fields-related inheritance logic, but keep going though the prototype chain to look for super classes that contain other features (like NgOnChanges), that we need to invoke for a given Component def.
PR Close#34244
Fixes an error that is thrown when a provider is overridden in `TestBed`, if the module definition of one of the imported modules uses a function for the `imports` that is set via `setNgModuleScope`. The problem was that we have a `for...of` loop that assumes that the imports are an array, but they can also be a function. This was handled correctly in other places, but this one was missed.
Note that the above-mentioned error is only thrown at runtime when the code is transpiled to es6. In es5 TS generates a call to a helper that handles the error silently so the attached unit test only fails in es6.
Fixes#34623.
PR Close#34629
Currently, the language service provides completions in a template node
attribute by first checking if the attribute contains template bindings
to provide completions for, and then providing completions for the
expression in the attribute.
In the latter case, the expression AST was being constructed
"synthetically" inside the language service, in particular declaring the
expression to be a `PropertyRead` with an implicit receiver.
Unfortunately, this AST can be incorrect if the expression is actually a
property read on a component property receiver (e.g. when reading
`key` in the expression `obj.key`, `obj` is the receiver).
The fix is pretty simple - rather than a synthetic construction of the
AST, ask the expression parser to parse the expression in the attribute.
Fixes https://github.com/angular/vscode-ng-language-service/issues/523
PR Close#34517
Previously, it was required that both `fullTemplateTypeCheck` and
`strictTemplates` had to be enabled for strict mode to be enabled. This
is strange, as `strictTemplates` implies `fullTemplateTypeCheck`. This
commit makes setting the `fullTemplateTypeCheck` flag optional so that
strict mode can be enabled by just setting `strictTemplates`.
PR Close#34195
It is now an error if '"fullTemplateTypeCheck"' is disabled while
`"strictTemplates"` is enabled, as enabling the latter implies that the
former is also enabled.
PR Close#34195
The compiler has a translation mechanism to convert from an Angular
`Type` to a `ts.TypeNode`, as appropriate. Prior to this change, it
would translate certain Angular expressions into their value equivalent
in TypeScript, instead of the correct type equivalent. This was possible
as the `ExpressionVisitor` interface is not strictly typed, with `any`s
being used for return values.
For example, a literal object was translated into a
`ts.ObjectLiteralExpression`, containing `ts.PropertyAssignment` nodes
as its entries. This has worked without issues as their printed
representation is identical, however it was incorrect from a semantic
point of view. Instead, a `ts.TypeLiteralNode` is created with
`ts.PropertySignature` as its members, which corresponds with the type
declaration of an object literal.
PR Close#34021
In Ivy's template type checker, type constructors are created for all
directive types to allow for accurate type inference to work. The type
checker has two strategies for dealing with such type constructors:
1. They can be emitted local to the type check block/type check file.
2. They can be emitted as static `ngTypeCtor` field into the directive
itself.
The first strategy is preferred, as it avoids having to update the
directive type which would cause a more expensive rebuild. However, this
strategy is not suitable for directives that have constrained generic
types, as those constraints would need to be present on the local type
constructor declaration. This is not trivial, as it requires that any
type references within a type parameter's constraint are imported into
the local context of the type check block.
For example, lets consider the `NgForOf` directive from '@angular/core'
looks as follows:
```typescript
import {NgIterable} from '@angular/core';
export class NgForOf<T, U extends NgIterable<T>> {}
```
The type constructor will then have the signature:
`(o: Pick<i1.NgForOf<T, U>, 'ngForOf'>) => i1.NgForOf<T, U>`
Notice how this refers to the type parameters `T` and `U`, so the type
constructor needs to be emitted into a scope where those types are
available, _and_ have the correct constraints.
Previously, the template type checker would detect the situation where a
type parameter is constrained, and would emit the type constructor
using strategy 2; within the directive type itself. This approach makes
any type references within the generic type constraints lexically
available:
```typescript
export class NgForOf<T, U extends NgIterable<T>> {
static ngTypeCtor<T = any, U extends NgIterable<T> = any>
(o: Pick<NgForOf<T, U>, 'ngForOf'>): NgForOf<T, U> { return null!; }
}
```
This commit introduces the ability to emit a type parameter with
constraints into a different context, under the condition that it can
be imported from an absolute module. This allows a generic type
constructor to be emitted into a type check block or type check file
according to strategy 1, as imports have been generated for all type
references within generic type constraints. For example:
```typescript
import * as i0 from '@angular/core';
import * as i1 from '@angular/common';
const _ctor1: <T = any, U extends i0.NgIterable<T> = any>
(o: Pick<i1.NgForOf<T, U>, 'ngForOf'>) => i1.NgForOf<T, U> = null!;
```
Notice how the generic type constraint of `U` has resulted in an import
of `@angular/core`, and the `NgIterable` is transformed into a qualified
name during the emitting process.
Resolves FW-1739
PR Close#34021
In the past, only the starting index of an expression Token has been
recorded, so a parser could demarkate the span of a token only by the
start locations of two tokens. This may lead to trailing whitespace
being included in the token span:
```html
{{ token1 + token2 }}
^^^^^^^^^ recorded span of `token1`
```
It's also not enough for a parser to determine the end of a token by
adding the length of the token value to the token's start location,
because lexed expression values may not exactly reflect the source code.
For example, `"d\\"e"` is lexed as a string token whose value is `d"e`.
Instead, this commit adds a `end` field to expression tokens. `end`
is one past the last index of the token source code. This will enable a
parser to determine the span of a token just by looking at that token.
This is a breaking change because the contructor interface of `Token`
has changed.
Part of #33477.
PR Close#33549
This commit fixes a bug in which we do testing for completions.
Subsequently, this exposes another bug in our implementation whereby
suggestions are not provided in "ngFor" where there should have been.
Currently, multiple test cases are grouped together in a single
template. This requires the template to be somewhat complete so that
test cases that depend on variables declared earlier would pass.
Consider the following example:
```
template: `
<div *ngFor="let ~{for-person}person of ~{for-people}people">
<span>Name: {{~{for-interp-person}person.~{for-interp-name}name}}</span>
<span>Age: {{person.~{for-interp-age}age}}</span>
</div>`,
```
In order to test `~{for-interp-person}`, `people` has to be included after
`~{for-people}`. This means the test case for `~{for-people}` is not
reflective of the actual use case because the variable is already there!
In real case, the expression would be incomplete, and our implementation
failed to take that into account.
This commit breaks such test into individual tests, and fix the bugs in
the underlying implementation.
PR Close#34473
Angular View Engine uses global knowledge to compile the following code:
```typescript
export class Base {
constructor(private vcr: ViewContainerRef) {}
}
@Directive({...})
export class Dir extends Base {
// constructor inherited from base
}
```
Here, `Dir` extends `Base` and inherits its constructor. To create a `Dir`
the arguments to this inherited constructor must be obtained via dependency
injection. View Engine is able to generate a correct factory for `Dir` to do
this because via metadata it knows the arguments of `Base`'s constructor,
even if `Base` is declared in a different library.
In Ivy, DI is entirely a runtime concept. Currently `Dir` is compiled with
an ngDirectiveDef field that delegates its factory to `getInheritedFactory`.
This looks for some kind of factory function on `Base`, which comes up
empty. This case looks identical to an inheritance chain with no
constructors, which works today in Ivy.
Both of these cases will now become an error in this commit. If a decorated
class inherits from an undecorated base class, a diagnostic is produced
informing the user of the need to either explicitly declare a constructor or
to decorate the base class.
PR Close#34460
Adds a compilation error if the consumer tries to pass in an undecorated class into the `providers` of an `NgModule`, or the `providers`/`viewProviders` arrays of a `Directive`/`Component`.
PR Close#34460
The function `makeTemplateDiagnostic` was accepting an error code of type
`number`, making it easy to accidentally pass an `ErrorCode` directly and
not convert it to an Angular diagnostic code first.
This commit refactors `makeTemplateDiagnostic` to accept `ErrorCode` up
front, and convert it internally. This is less error-prone.
PR Close#34460
Previously, ngtsc would perform scope analysis (which directives/pipes are
available inside a component's template) and template type-checking of that
template as separate steps. If a component's scope was somehow invalid (e.g.
its NgModule imported something which wasn't another NgModule), the
component was treated as not having a scope. This meant that during template
type-checking, errors would be produced for any invalid expressions/usage of
other components that should have been in the scope.
This commit changes ngtsc to skip template type-checking of a component if
its scope is erroneous (as opposed to not present in the first place). Thus,
users aren't overwhelmed with diagnostic errors for the template and are
only informed of the root cause of the problem: an invalid NgModule scope.
Fixes#33849
PR Close#34460
Previously each NgModule trait checked its own scope for valid declarations
during 'resolve'. This worked, but caused the LocalModuleScopeRegistry to
declare that NgModule scopes were valid even if they contained invalid
declarations.
This commit moves the generation of diagnostic errors to the
LocalModuleScopeRegistry where it belongs. Now the registry can consider an
NgModule's scope to be invalid if it contains invalid declarations.
PR Close#34460
The template type checker generates TypeScript expressions for any
expression that occurs in a template, so that TypeScript can check it
and produce errors. Some expressions as they occur in a template may be
translated into TypeScript code multiple times, for instance a binding
to a directive input that has a template guard.
One example would be the `NgIf` directive, which has a template guard to
narrow the type in the template as appropriate. Given the following
template:
```typescript
@Component({
template: '<div *ngIf="person">{{ person.name }}</div>'
})
class AppComponent {
person?: { name: string };
}
```
A type check block (TCB) with roughly the following structure is
created:
```typescript
function tcb(ctx: AppComponent) {
const t1 = NgIf.ngTypeCtor({ ngIf: ctx.person });
if (ctx.person) {
"" + ctx.person.name;
}
}
```
Notice how the `*ngIf="person"` binding is present twice: once in the
type constructor call and once in the `if` guard. As such, TypeScript
will check both instances and would produce duplicate errors, if any
were found.
Another instance is when the safe navigation operator is used, where an
expression such as `person?.name` is emitted into the TCB as
`person != null ? person!.name : undefined`. As can be seen, the
left-hand side expression `person` occurs twice in the TCB.
This commit adds the ability to insert markers into the TCB that
indicate that any errors within the expression should be ignored. This
is similar to `@ts-ignore`, however it can be applied more granularly.
PR Close#34417
Previously, the type checker would compute an absolute source span by
combining an expression AST node's `ParseSpan` (relative to the start of
the expression) together with the absolute offset of the expression as
represented in a `ParseSourceSpan`, to arrive at a span relative to the
start of the file. This information is now directly available on an
expression AST node in the `AST.sourceSpan` property, which can be used
instead.
PR Close#34417
Now that the source to typings matching is able to handle
aliasing of exports, there is no need to handle aliases in private
declarations analysis.
These were originally added to cope when the typings files had
to use the name that the original source files used when exporting.
PR Close#34254
Previously the identifiers used in the typings files were the same as
those used in the source files.
When the typings files and the source files do not match exactly, e.g.
when one of them is flattened, while the other is a deep tree, it is
possible for identifiers to be renamed.
This commit ensures that the correct identifier is used in typings files
when the typings file does not export the same name as the source file.
Fixes https://github.com/angular/ngcc-validation/pull/608
PR Close#34254
The naïve matching algorithm we previously used to match declarations in
source files to declarations in typings files was based only on the name
of the thing being declared. This did not handle cases where the declared
item had been exported via an alias - a common scenario when one of the two
file sets (source or typings) has been flattened, while the other has not.
The new algorithm tries to overcome this by creating two maps of export
name to declaration (i.e. `Map<string, ts.Declaration>`).
One for the source files and one for the typings files.
It then joins these two together by matching export names, resulting in a
new map that maps source declarations to typings declarations directly
(i.e. `Map<ts.Declaration, ts.Declaration>`).
This new map can handle the declaration names being different between the
source and typings as long as they are ultimately both exported with the
same alias name.
Further more, there is one map for "public exports", i.e. exported via the
root of the source tree (the entry-point), and another map for "private
exports", which are exported from individual files in the source tree but
not necessarily from the root. This second map can be used to "guess"
the mapping between exports in a deep (non-flat) file tree, which can be
used by ngcc to add required private exports to the entry-point.
Fixes#33593
PR Close#34254
In TS we can re-export imports using statements of the form:
```
export * from 'some-import';
```
This is downleveled in UMD to:
```
function factory(exports, someImport) {
function __export(m) {
for (var p in m) if (!exports.hasOwnProperty(p)) exports[p] = m[p];
}
__export(someImport);
}
```
This commit adds support for this.
PR Close#34254
In TS we can re-export imports using statements of the form:
```
export * from 'some-import';
```
This can be downleveled in CommonJS to either:
```
__export(require('some-import'));
```
or
```
var someImport = require('some-import');
__export(someImport);
```
Previously we only supported the first downleveled version.
This commit adds support for the second version.
PR Close#34254
Previously individual properties of the src bundle program were
passed to the reflection host constructors. But going forward,
more properties will be required. To prevent the signature getting
continually larger and more unwieldy, this change just passes the
whole src bundle to the constructor, allowing it to extract what it
needs.
PR Close#34254
When a HTML Ast containing an Attribute node is converted to a Template Ast,
the attribute node might get dropped from the Template Ast path.
This is because the AttrNode is not even in the Template Ast to begin with.
In this case, we manually fix the path by converting the Attribute node
to a AttrAst node and appending it to the path.
This allows the `ExpressionVisitor` to properly visit the leaf node in the
TemplateAst path. We no longer need to visit the `Element` and look for
attributes.
PR Close#34459
Prior to this change, the ExpressionChangedAfterChecked error thrown in Ivy was missing useful information that was available in View Engine, specifically: missing property name for proprty bindings and also the content of the entire property interpolation (only a changed value was displayed) if one of expressions was changed unexpectedly. This commit improves the error message by including the mentioned information into the error text.
PR Close#34381
Previously, bound events were incorrectly bound to directives with
inputs matching the bound event attribute. This fixes that so bound
events can only be bound to directives with matching outputs.
Adds tests for all kinds of directive matching on bound attributes.
PR Close#31938
This is not expected to have any noticeable perf impact, but it wasteful
nonetheless (and annoying when stepping through the code while debugging
`ngtsc`/`ngcc`).
PR Close#34441
This commit adds three previously missing validations to
NgModule.declarations:
1. It checks that declared classes are actually within the current
compilation.
2. It checks that declared classes are directives, components, or pipes.
3. It checks that classes are declared in at most one NgModule.
PR Close#34404
NgModel internally coerces any arbitrary value that will assigned
to the `disabled` `@Input` to a boolean. This has been done to
support the common case where developers set the disabled attribute
without a value. For example:
```html
<input type="checkbox" [(ngModel)]="value" disabled>
```
This worked in View Engine without any errors because inputs were
not strictly checked. In Ivy though, developers can opt-in into
strict template type checking where the attribute would be flagged.
This is because the `NgModel#isDisabled` property type-wise only
accepts a `boolean`. To ensure that the common pattern described
above can still be used, and to reflect the actual runtime behavior,
we should add an acceptance member that makes it work without type
checking errors.
Using a coercion member means that this is not a breaking change.
PR Close#34438
Given the following HTML and cursor position:
```
<div c|></div>
^ cursor is here
```
Note that the cursor is **after** the attribute `c`.
Under the current implementation, only `Element` is included in the
path. Instead, it should be `Element -> Attribute`.
This bug occurs only for cases where the cursor is right after the Node,
and it is because the `end` position of the span is excluded from the search.
Instead, the `end` position should be included.
PR Close#34440
`let` and `of` should be considered reserved keywords in template syntax
and thus should not be part of the autocomplete suggestions.
For reference, TypeScript does not provide such completions.
This commit removes these results and cleans up the code.
PR Close#34434
The ordering matters because we don't currently throw if multiple
configurations are provided (i.e. provider has *both* useExisting and
useFactory). We should actually throw an error in this case, but to
avoid another breaking change in v9, this PR simply aligns the Ivy
behavior with ViewEngine.
PR Close#34433
In the TransitionAnimationEngine we keep track of the existing elements with animations and we clear the cached data when they're removed. We also have some logic where we transition away the child elements when a parent is removed, however in that case we never cleared the cached element data which resulted in a memory leak. The leak is particularly visible in Material where whenever there's an animated overlay with a component inside of it that has an animation, the child component would always be retained in memory.
Fixes#25744.
PR Close#34409
Prior to ivy, undefined values passed in an object to the
ngStyle directive were ignored. Restore this behavior by
ignoring keys that point to undefined values.
closes#34310
PR Close#34422
Expressions in an inline template binding are improperly recorded as
spaning an offset calculated from the start of the template binding
attribute key, whereas they should be calculated from the start of the
attribute value, which contains the actual binding AST.
PR Close#31813
There were some extra examples for `downgradeComponent()` in the upgrade
guide. Added a link to the relevant section of the guide in the
`downgradeComponent()` docs.
Fixes#31584
PR Close#34406
Currently we only run Saucelabs on PRs using the legacy View Engine
build. Switching that build to Ivy is not trivial and there are various
options:
1. Updating the R3 switches to use POST_R3 by default. At first glance,
this doesn't look easy because the current ngtsc switch logic seems to
be unidirectional (only PRE_R3 to POST_R3).
2. Updating the legacy setup to run with Ivy. This sounds like the easiest
solution at first.. but it turns out to be way more complicated. Packages
would need to be built with ngtsc using legacy tools (i.e. first building
the compiler-cli; and then building packages) and View Engine only tests
would need to be determined and filtered out. Basically it will result in
re-auditing all test targets. This is contradictory to the fact that we have
this information in Bazel already.
3. Creating a new job that runs tests on Saucelabs with Bazel. We specify
fine-grained test targets that should run. This would be a good start
(e.g. acceptance tests) and also would mean that we do not continue maintaining
the legacy setup..
This commit implements the third option as it allows us to move forward
with the general Bazel migration. We don't want to spend too much time
on our legacy setup since it will be removed anyway in the future.
PR Close#34277
When we log DI errors we get the name of the provider via `SomeClass.name`. In IE functions that inherit from other functions don't have their own `name`, but they take the `name` from the lowest parent in the chain, before `Function`. I've added some changes to fall back to parsing out the function name from the function's string form.
PR Close#34305
The way definitions are added in JIT mode is through `Object.defineProperty`, but the problem is that in IE10 properties defined through `defineProperty` won't be inherited which means that inheriting injectable definitions no longer works. These changes add a workaround only for JIT mode where we define a fallback method for retrieving the definition. This isn't ideal, but it should only be required until v10 where we'll no longer support inheriting injectable definitions from undecorated classes.
PR Close#34305
In JIT mode we use `__proto__` when reading constructor parameter metadata, however it's not supported on IE10. These changes switch to using `Object.getPrototypeOf` instead.
PR Close#34305
We've got some tests that assert that the generate DOM looks correct. The problem is that IE changes the attribute order in `innerHTML` which caused the tests to fail. I've reworked the relevant tests not to assert directly against `innerHTML`.
PR Close#34305
We have a couple of cases where we use something like `typeof Node === 'function'` to figure out whether we're in a worker context. This works in most browsers, but IE returns `object` instead of `function`. I've updated all the usages to account for it.
PR Close#34305
In `DebugElement.attributes` we return all of the attributes from the underlying DOM node. Most browsers change the attribute names to lower case, but IE preserves the case and since we use camel-cased attributes, the return value was inconsitent. I've changed it to always lower case the attribute names.
PR Close#34305
While sanitizing on browsers that don't support the `template` element (pretty much only IE), we create an inert document and we insert content into it via `document.body.innerHTML = unsafeHTML`. The problem is that IE appears to parse the HTML passed to `innerHTML` differently, depending on whether the element has been inserted into a document or not. In particular, it seems to split some strings into multiple text nodes, which would've otherwise been a single node. This ended up throwing off some of the i18n code down the line and causing a handful of failures. I've worked around it by creating a new inert `body` element into which the HTML would be inserted.
PR Close#34305
A quirk of the Angular template parser is that when parsing templates in the
"default" mode, with options specified by the user, the source mapping
information in the template AST may be inaccurate. As a result, the compiler
parses the template twice: once for "emit" and once to produce an AST with
accurate sourcemaps for diagnostic production.
Previously, only the first parse was performed during analysis. The second
parse occurred during the template type-checking phase, just in time to
produce the template type-checking file.
However, with the reuse of analysis results during incremental builds, it
makes more sense to do the diagnostic parse eagerly during analysis so that
the work isn't unnecessarily repeated in subsequent builds. This commit
refactors the `ComponentDecoratorHandler` to do both parses eagerly, which
actually cleans up some complexity around template parsing as well.
PR Close#34334
Avoids the usage of array destructuring, as it introduces calls to
a `__values` helper function in ES5 that has a relatively high
performance impact. This shaves off roughly 130ms of CPU time for a
large compilation with big templates that uses i18n.
PR Close#34332
The template parser has a certain interpolation config associated with
it and builds a regular expression each time it needs to extract the
interpolations from an input string. Since the interpolation config is
typically the default of `{{` and `}}`, the regular expression doesn't
have to be recreated each time. Therefore, this commit creates only a
single regular expression instance that is used for the default
configuration.
In a large compilation unit with big templates, computing the regular
expression took circa 275ms. This change reduces this to effectively
zero.
PR Close#34332
On a large compilation unit with big templates, the total time spent in
the `PlainCharacterCursor` constructor was 470ms. This commit applies
two optimizations to reduce this time:
1. Avoid the object spread operator within the constructor, as the
generated `__assign` helper in the emitted UMD bundle (ES5) does not
optimize well compared to a hardcoded object literal. This results in a
significant performance improvement. Because of the straight-forward
object literal, the VM is now much better able to optimize the memory
allocations which makes a significant difference as the
`PlainCharacterCursor` constructor is called in tight loops.
2. Reduce the number of `CharacterCursor` clones. Although cloning
itself is now much faster because of the optimization above, several
clone operations were not necessary.
Combined, these changes reduce the total time spent in the
`PlainCharacterCursor` constructor to just 10ms.
PR Close#34332
During TypeScript module resolution, a lot of filesystem requests are
done. This is quite an expensive operation, so a module resolution cache
can be used to speed up the process significantly.
This commit lets the Ivy compiler perform all module resolution with a
module resolution cache. Note that the module resolution behavior can be
changed with a custom compiler host, in which case that custom host
implementation is responsible for caching. In the case of the Angular
CLI a custom compiler host with proper module resolution caching is
already in place, so the CLI already has this optimization.
PR Close#34332
The export scope of NgModules from external compilations units, as
present in .d.ts declarations, does not change during a compilation so
can be easily shared. There was already a cache but the computed export
scope was not actually stored there. This commit fixes that.
PR Close#34332
To create a binding parser, an instance of `ElementSchemaRegistry` is
required. Prior to this change, each time a new binding parser was
created a new instance of `DomElementSchemaRegistry` would be
instantiated. This is an expensive operation that takes roughly 1ms per
instantiation, so it is key that multiple allocations are avoided.
By sharing a single `DomElementSchemaRegistry`, we avoid two such
allocations, i.e. save ~2ms, per component template.
PR Close#34332
Previously the calls to run the schematics were not being properly
or consistently awaited in the tests. While this currently does not
affect the tests' performance, this fix corrects the syntax and
adds stability for future changes.
PR Close#34364
In Ivy it's illegal for a template to write to a template variable. So the
template:
```html
<ng-template let-somevar>
<button (click)="somevar = 3">Set var to 3</button>
</ng-template>
```
is erroneous and previously would fail to compile with an assertion error
from the `TemplateDefinitionBuilder`. This error wasn't particularly user-
friendly, though, as it lacked the context of which template or where the
error occurred.
In this commit, a new check in template type-checking is added which detects
such erroneous writes and produces a true diagnostic with the appropriate
context information.
Closes#33674
PR Close#34339
Previously, the compiler performed an incremental build by analyzing and
resolving all classes in the program (even unchanged ones) and then using
the dependency graph information to determine which .js files were stale and
needed to be re-emitted. This algorithm produced "correct" rebuilds, but the
cost of re-analyzing the entire program turned out to be higher than
anticipated, especially for component-heavy compilations.
To achieve performant rebuilds, it is necessary to reuse previous analysis
results if possible. Doing this safely requires knowing when prior work is
viable and when it is stale and needs to be re-done.
The new algorithm implemented by this commit is such:
1) Each incremental build starts with knowledge of the last known good
dependency graph and analysis results from the last successful build,
plus of course information about the set of files changed.
2) The previous dependency graph's information is used to determine the
set of source files which have "logically" changed. A source file is
considered logically changed if it or any of its dependencies have
physically changed (on disk) since the last successful compilation. Any
logically unchanged dependencies have their dependency information copied
over to the new dependency graph.
3) During the `TraitCompiler`'s loop to consider all source files in the
program, if a source file is logically unchanged then its previous
analyses are "adopted" (and their 'register' steps are run). If the file
is logically changed, then it is re-analyzed as usual.
4) Then, incremental build proceeds as before, with the new dependency graph
being used to determine the set of files which require re-emitting.
This analysis reuse avoids template parsing operations in many circumstances
and significantly reduces the time it takes ngtsc to rebuild a large
application.
Future work will increase performance even more, by tackling a variety of
other opportunities to reuse or avoid work.
PR Close#34288
Previously 'analyze' in the various `DecoratorHandler`s not only extracts
information from the decorators on the classes being analyzed, but also has
several side effects within the compiler:
* it can register metadata about the types involved in global metadata
trackers.
* it can register information about which .ngfactory symbols are actually
needed.
In this commit, these side-effects are moved into a new 'register' phase,
which runs after the 'analyze' step. Currently this is a no-op refactoring
as 'register' is always called directly after 'analyze'. In the future this
opens the door for re-use of prior analysis work (with only 'register' being
called, to apply the above side effects).
Also as part of this refactoring, the reification of NgModule scope
information into the incremental dependency graph is moved to the
`NgtscProgram` instead of the `TraitCompiler` (which now only manages trait
compilation and does not have other side effects).
PR Close#34288
Prior to this commit, the `IvyCompilation` tracked the state of each matched
`DecoratorHandler` on each class in the `ts.Program`, and how they
progressed through the compilation process. This tracking was originally
simple, but had grown more complicated as the compiler evolved. The state of
each specific "target" of compilation was determined by the nullability of
a number of fields on the object which tracked it.
This commit formalizes the process of compilation of each matched handler
into a new "trait" concept. A trait is some aspect of a class which gets
created when a `DecoratorHandler` matches the class. It represents an Ivy
aspect that needs to go through the compilation process.
Traits begin in a "pending" state and undergo transitions as various steps
of compilation take place. The `IvyCompilation` class is renamed to the
`TraitCompiler`, which manages the state of all of the traits in the active
program.
Making the trait concept explicit will support future work to incrementalize
the expensive analysis process of compilation.
PR Close#34288
Previously the UMD rendering formatter assumed that
there would already be import (and an export) arguments
to the UMD factory function.
This commit adds support for this corner case.
Fixes#34138
PR Close#34353
This reverts commit 73fd10ddd5548ce899b897ba2779ff041914c2dc because it's part
of a PR that was red on CircleCI once it was merged into master (Windows tests
are only run on master, not on PRs).
PR Close#34360
This reverts commit 6b905347bd2294bba703f6d38c983356af58946b because it's part
of a PR that was red on CircleCI once it was merged into master (Windows tests
are only run on master, not on PRs).
PR Close#34360
This reverts commit 4e38a973b158ba397903199abe1e008b0627d81c because it's part of a PR
that was red on CircleCI once it was merged into master (Windows tests are only run
on master, not on PRs).
PR Close#34360
When statically evalulating UMD code it is possible to find
that we are looking for the declaration of an identifier that
actually came from a typings file (rather than a UMD file).
Previously, the UMD reflection host would always try to use
a UMD specific algorithm for finding identifier declarations,
but when the id is actually in a typings file this resulted in the
returned declaration being the containing file of the declaration
rather than the declaration itself.
Now the UMD reflection host will check to see if the file containing
the identifier is a typings file and use the appropriate stategy.
PR Close#34356
The `loadTranslations()` function will attach the `translate()` function
to `$localize.translate` to cause runtime translation to occur.
We should cleanup after ourselves by unattaching this function when
we call `clearTranslations()`.
Fixes#32781
PR Close#34346
This release brings a bug fix that https://github.com/angular/angular/pull/34243 is waiting on in order to remove rules_nodejs patches: fix(builtin): additional_root_paths in pkg_web should also include paths in genfiles and bin dirs (bazelbuild/rules_nodejs#1402)
PR Close#34112
This commit fixes a couple issues that prevent `class_binding` benchmark from running: moving constants requires by the `benchmark` function before function declaration and referencing correct consts in template instructions.
PR Close#34242
The `ModuleWithProviders` type has an optional type parameter that
should be specified to indicate what NgModule class will be provided.
This enables the Ivy compiler to statically determine the NgModule type
from the declaration files. This type parameter will become required in
the future, however to aid in the migration the compiler will detect
code patterns where using `ModuleWithProviders` as return type is
appropriate, in which case it transforms the emitted .d.ts files to
include the generic type argument.
This should reduce the number of occurrences where `ModuleWithProviders`
is referenced without its generic type argument.
Resolves FW-389
PR Close#34235
This commit refactors the way the compiler transforms .d.ts files during
ngtsc builds. Previously the `IvyCompilation` kept track of a
`DtsFileTransformer` for each input file. Now, any number of
`DtsTransform` operations that need to be applied to a .d.ts file are
collected in the `DtsTransformRegistry`. These are then ran using a
single `DtsTransformer` so that multiple transforms can be applied
efficiently.
PR Close#34235
The metadata collector for View Engine compilations emits error symbols
for static class members that have not been initialized, which prevents
a library from building successfully when `strictMetadataEmit` is
enabled, which is recommended for libraries to avoid issues in library
consumers. This is troublesome for libraries that are adopting static
members for the Ivy template type checker: these members don't need a
value assignment as only their type is of importance, however this
causes metadata errors. As such, a library used to be required to
initialize the special static members to workaround this error,
undesirably introducing a code-size overhead in terms of emitted
JavaScript code.
This commit modifies the collector logic to specifically ignore
the special static members for Ivy's template type checker, preventing
any errors from being recorded during the metadata collection.
PR Close#34296
For Ivy's template type checker it is possible to let a directive
specify static members to allow a wider type for some input:
```typescript
export class MatSelect {
@Input() disabled: boolean;
static ngAcceptInputType_disabled: boolean | string;
}
```
This allows a binding to the `MatSelect.disabled` input to be of type
boolean or string, whereas the `disabled` property itself is only of
type boolean.
Up until now, any static `ngAcceptInputType_*` property was not
inherited for subclasses of a directive class. This is cumbersome, as
the directive's inputs are inherited, so any acceptance member should as
well. To resolve this limitation, this commit extends the flattening of
directive metadata to include the acceptance members.
Fixes#33830
Resolves FW-1759
PR Close#34296
TypeScript 3.7 flags `if` conditions that implicitly coerce a function/method definition. While checking for the `template` presence on a def (actually checking whether we work with Component) in `saveNameToExportMap`, the `if` condition had implicit type coercion. This commit updates the condition to use the `isComponentDef` function (that checks `def.template` against `null` internally) to avoid compilation errors with TypeScript 3.7.
PR Close#34335
Prior to this commit, values wrapped into SafeStyle were not handled correctly in [style.prop] bindings in case style sanitizer is present (when template contains some style props that require sanitization). Style sanitizer was not unwrapping values in case a given prop doesn't require sanitization.As a result, wrapped values were used as final styling values (see https://github.com/angular/angular/blob/master/packages/core/src/render3/styling/bindings.ts#L620). This commit updates the logic to unwrap safe values in sanitizer in case no sanitization is required.
PR Close#34286
The undecorated child migration creates a synthetic decorator, which
contained `"exportAs": ["exportName"]` as obtained from the metadata of
the parent class. This is a problem, as `exportAs` needs to specified
as a comma-separated string instead of an array. This commit fixes the
bug by transforming the array of export names back to a comma-separated
string.
PR Close#34014
When ngcc is analyzing synthetically inserted decorators from a
migration, it is typically not expected that any diagnostics are
produced. In the situation where a diagnostic is produced, however, the
diagnostic would not be reported at all. This commit ensures that
diagnostics in migrations are reported.
PR Close#34014
The compiler exports a `formatDiagnostics` function which consumers can use
to print both ts and ng diagnostics. However, this function was previously
using the "old" style TypeScript diagnostics, as opposed to the modern
diagnostic printer which uses terminal colors and prints additional context
information.
This commit updates `formatDiagnostics` to use the modern formatter, plus to
update Ivy's negative error codes to Angular 'NG' errors.
The Angular CLI needs a little more work to use this function for printing
TS diagnostics, but this commit alone should fix Bazel builds as ngc-wrapped
goes through `formatDiagnostics`.
PR Close#34234
Occasionally a factory function needs to be generated for an "invalid"
constructor (one with parameters types which aren't injectable). Typically
this happens in JIT mode where understanding of parameters cannot be done in
the same "up-front" way that the AOT compiler can.
This commit changes the JIT compiler to generate a new `invalidFactoryDep`
call for each invalid parameter. This instruction will error at runtime if
called, indicating both the index of the invalid parameter as well as (via
the stack trace) the factory function which was generated for the type being
constructed.
Fixes#33637
PR Close#33739
In Ivy, if you do:
`TestBed.configureTestingModule({providers: [{provide: Service}]});`
the injector will attempt to inject Service as if it was simply listed
in the providers array like `{providers: [Service]}`
This fixes an inconsistency when similarly providing an override with no
`useValue` or `useFactory`.
PR Close#33769
Previously the JIT evaluated code for ivy localized strings included
backtick tagged template strings, which are not compatible with ES5
in legacy browsers such as IE 11.
Now the generated code is ES5 compatible.
Fixes#34246
PR Close#34265
Prior to this commit, calling change detection for destroyed views resulted in errors being thrown in some cases. This commit adds a check to make sure change detection is invoked for non-destroyed views only.
PR Close#34241
Previously, ternary expressions were emitted as:
condExpr ? trueCase : falseCase
However, this causes problems when ternary operations are nested. In
particular, a template expression of the form:
a?.b ? c : d
would have compiled to:
a == null ? null : a.b ? c : d
The ternary operator is right-associative, so that expression is interpreted
as:
a == null ? null : (a.b ? c : d)
when in reality left-associativity is desired in this particular instance:
(a == null ? null : a.b) ? c : d
This commit adds a check in the expression translator to detect such
left-associative usages of ternaries and to enforce such associativity with
parentheses when necessary.
A test is also added for the template type-checking expression translator,
to ensure it correctly produces right-associative expressions for ternaries
in the user's template.
Fixes#34087
PR Close#34221
Remove the remaining check for compile build variable in the ng_module
rule. Now that components is no longer relying on this build variable
we can safely remove it from our repository.
We will leave the remaining check for if the compile build variable is
used within our own repo, with plans to remove it in a couple months.
It is being kept in place to ensure that uncommitted local scripts for
our own development that we have locally, kill error as expected if
they still reference the compile build variable.
PR Close#34280
Adds the ability to expose global symbols in the API docs via the `@globalApi` tag. Also supports optionally setting a namespace which will be added to the name automatically (e.g. `foo` will be renamed to `ng.foo`). Relevant APIs should also be exported through the `global.ts` file which will show up under `core/global`.
PR Close#34237
Due to a bug in the existing banner, `typescript` module was require-d
instead of reusing the module passed in from tsserver.
This bug is caused by some source files in language-service that imports
`typescript` instead of `typescript/lib/tsserverlibrary`.
This is not an unsupported use case, it's just that when typescript is
resolved in the banner we have to be very careful about which modules to
"require".
The convoluted logic in the banner makes it very hard to detect
anomalies. This commit cleans it up and removes a lot of unneeded code.
This commit also removes `ts` import in typescript_host.ts and use `tss`
instead to make it less confusing.
PR Close#34262
This commit creates a way for `ng_module` rule to compile with Ivy based
on the `ivy` attribute. This enables google3 targets to pick the
compiler without using `define` flags.
PR Close#34238
Previously, create_angular_testing_module would export a mutable `let`
binding. The binding is already exporting using an accessor function
though, so the export on the let variable seems like an accidental
oversight.
This is functionally equivalent, but makes it easier for module
optimizers such as Closure Compiler to track down side effects and prune
modules.
PR Close#34232
Previously, browser_util would export a mutable `let` binding that was
initialized as a side-effect of `BrowserDetection.setup()`. This change
refactors the mutable binding into a `const` binding that is immediately
initialized in its initialized.
This is functionally equivalent, but makes it easier for module
optimizers such as Closure Compiler to track down side effects and prune
modules. It is also arguably cleaner to read (no worries about later
changes to the apparently mutable but effectively const binding).
PR Close#34207
Previously the `rootDir` was set to the entry-point path but
this is incorrect if the source files are stored in a directory outside
the entry-point path. This is the case in the latest versions of the
Angular CDK.
Instead the `rootDir` should be the containing package path, which is
guaranteed to include all the source for the entry-point.
---
A symptom of this is an error when ngcc is trying to process the source of
an entry-point format after the entry-point's typings have already been
processed by a previous processing run.
During processing the `_toR3Reference()` function gets called which in turn
makes a call to `ReflectionHost.getDtsDeclaration()`. If the typings files
are also being processed this returns the node from the dts typings files.
But if we have already processed the typings files and are now processing
only an entry-point format without typings, the call to
`ReflectionHost.getDtsDeclaration()` returns `null`.
When this value is `null`, a JS `valueRef` is passed through as the DTS
`typeRef` to the `ReferenceEmitter`. In this case, the `ReferenceEmitter`
fails during `emit()` because no `ReferenceEmitStrategy` is able to provide
an emission:
1) The `LocalIdentifierStrategy` is not able help because in this case
`ImportMode` is `ForceNewImport`.
2) The `LogicalProjectStrategy` cannot find the JS file below the `rootDir`.
The second strategy failure is fixed by this PR.
Fixes https://github.com/angular/ngcc-validation/issues/495
PR Close#34212
When directionality data was added to @angular/common locales, only
the externally used locales were updated. We need to additionally
update the closure locales which are synced into google3.
PR Close#34240
Commit that updated i18n message ids rendering (e524322c43) also introduced a couple tests that relied on a previous version of `ngI18nClosureMode` flag format. The `ngI18nClosureMode` usage format was changed in the followup commit (c4ce24647b) and triggered a problem with the mentioned tests. This commit updates the tests to a new `ngI18nClosureMode` flag usage format.
PR Close#34224
If the `ngI18nClosureMode` global check actually makes it
through to the runtime, then checks for its existence should
be guarded to prevent `Reference undefined` errors in strict
mode.
(Normally, it is stripped out by dead code elimination during
build optimization.)
This comment ensures that generated template code guards
this global check.
PR Close#34211
If the `ngI18nClosureMode` global check actually makes it
through to the runtime, then checks for its existence should
be guarded to prevent `Reference undefined` errors in strict
mode.
(Normally, it is stripped out by dead code elimination during
build optimization.)
PR Close#34211
This is a follow-up to #33997 where some new generic parameters were added without defaults which is technically a breaking change. These changes add the defaults.
PR Close#34206
Prior to this commit, there was no check in R3TestBed to verify that metadata is resolved using a given Type. That leads to some cryptic error messages (when TestBed tries to compile a Type without having metadata) in case TestBed override functions receive unexpected Types (for example a Directive is used in `TestBed.overrideComponent` call). This commit adds the necessary checks to verify metadata presence before TestBed tries to (re)compile a Type.
PR Close#34204
Prior to this commit, if a template (for example, generated using structural directive such as *ngIf) contains `ngProjectAs` attribute, it was not included into attributes array in generated code and as a result, these templates were not matched at runtime during content projection. This commit adds the logic to append `ngProjectAs` values into corresponding element's attribute arrays, so content projection works as expected.
PR Close#34200
Prior to this commit, i18n runtime code failed with the exception saying that no provider was found for ChangeDetectorRef for a pipe used in ICU. The problem happened because the underlying `createViewRef` function was not taking into account IcuContainer as a valid TNodeType. This commit updates the `createViewRef` function to return corresponding ViewRef for TNodeType.IcuContainer.
PR Close#34198
Includes a few minor performance improvements:
* In the `nextContext` instruction we assign a new LView to the `LFrame.contextLView` and then we immediately look it up to get its context. We don't need to do that since we know the view that was assigned already.
* Removes the default value for the `level` parameter of `nextContextImpl` because it generates more code in es5 and is internal-only.
* Removes the default parameter from `setActiveHostElement` since it generates extra code and it's an internal function.
* Makes a check in `setElementExitFn` more strict since we're guaranteed for the value to match the type.
PR Close#34183
Fixes ngtsc incorrectly logging an unknown element diagnostic for HTML elements that are inside an SVG `foreignObject` with the `xhtml` namespace.
Fixes#34171.
PR Close#34178
It is possible for HTML formatters to add whitespace
around the content of `i18n` attribute values. This can
make the meaning and custom ids brittle to simple
whitespace formatting.
This commit ensures that the metadata string extracted
from HTML `i18n` attributes is trimmed before being parsed
into meaning, description and custom id.
PR Close#34154
By ensuring that legacy i18n message ids are rendered into the templates
of components for packages processed by ngcc, we ensure that these packages
can be used in an application that may provide translations in a legacy
format.
Fixes#34056
PR Close#34135
Placing this configuration in to the bundle avoids having to pass the
value around through lots of function calls, but also could enable
support for different behaviour per bundle in the future.
PR Close#34135
Now that `@angular/localize` can interpret multiple legacy message ids in the
metablock of a `$localize` tagged template string, this commit adds those
ids to each i18n message extracted from component templates, but only if
the `enableI18nLegacyMessageIdFormat` is not `false`.
PR Close#34135
This change will enable the Angular compiler to provide these legacy
message ids by default, which will solve problems with ngcc not knowing
whether to generate legacy ids or not.
PR Close#34135
When first written there was no way to specify the raw text when
programmatically creating a template tagged literal AST node.
This is now fixed in TS and so the hack is no longer needed.
PR Close#34135
We should only generate the `providedIn` property in injectable
defs if it has a non-null value. `null` does not communicate
any information to the runtime that isn't communicated already
by the absence of the property.
This should give us some modest code size savings.
PR Close#34116
With this change we fix the logic to detect if a package is installed, removing a package and add a package by using the CLI schematic helpers.
Also we save `@angular/bazel` package directly as a `devDependency` when doing `ng-add`.
Closes#34164
PR Close#34181
For injectables, we currently generate a factory function in the
injectable def (prov) that delegates to the factory function in
the factory def (fac). It looks something like this:
```
factory: function(t) { return Svc.fac(t); }
```
The extra wrapper function is unnecessary since the args for
the factory functions are the same. This commit changes the
compiler to generate this instead:
```
factory: Svc.fac
```
Because we are generating less code for each injectable, we
should see some modest code size savings. AIO's main bundle
is about 1 KB smaller.
PR Close#34076
The ViewEngine translation extractor does not convert `-` to `_` for
placeholders that represent custom elements. For example `<app-component>`
gets converted to placeholders like `START_TAG_APP-COMPONENT`.
In `$localize` placeholders are expected to be snake-case, not kebab-case.
So we must normalize them when parsing a translation file that might have
been created via the View Engine translation extractor.
The `$localize` extraction code will normalize these placeholders when
creating translation files in the first place.
Fixes#34151
PR Close#34155
Various targets have their template type-checking disabled in the past.
There is no reason for this any more.
The only target that was tricky was packages/examples/core:core_examples
which was quite broken and I had to fix it up.
Template typechecking is still disabled under blaze, see FW-1753 for more
info.
PR Close#34144
due to an unfortunate condition in 168abc6d6f/packages/compiler-cli/src/ngtsc/program.ts (L430-L434) the typechecking has been disabled when running under bazel + ivy.
As far as I can tell the ivyTemplateTypeCheck flag is now obsolete, so removing this
code from ng_module.bzl is desirable. I'll send a separate PR to remove the flag completely.
PR Close#34144
If a Component or Directive is not part of any NgModule, the language
service currently produces an error message. This should not be an
error. Instead, it should be a suggestion.
This PR removes `ng.DiagnosticKind`, and instead reuses
`ts.DiagnosticCategory`.
PR closes https://github.com/angular/vscode-ng-language-service/issues/458
PR Close#34115
The language service incorrectly reports an error if it fails to find
NgModule metadata for a particular Component / Directive. In many cases,
the use case is legit, particularly in test.
This commit removes such diagnostic message and cleans up the interface
for `TypeScriptHost.getTemplateAst()`.
PR closes https://github.com/angular/vscode-ng-language-service/issues/463
PR Close#34113
To quicken migration for our own developers away from using compile=aot
for setting ivy, we actually fail the build process if the compile
build variable is used with a message to use our config flags instead.
PR Close#34109
To inform downstream users to switch to using angular_ivy_enabled as the build
variable for setting Ivy, a deprecation message is printed instructing the user
to migrate away from building with compile=*
PR Close#34109
Currently, variables of an unknown type in an `*ngFor` expression are
refined to have the type of the iterable binding of the `*ngFor`
expression. Unfortunately, this is a bug for variables aliasing
[values exported by
`*ngFor`](https://angular.io/api/common/NgForOf#local-variables),
including `index` and `first`, because they are also given the type of
the binding expression, but they are not of the binding type. For
example, in
```typescript
@Component({
selector: 'test',
template: `
<div *ngFor="let hero of heroes; let i = index; let isFirst = first">
{{ hero }}
</div>
`
})
export class TestComponent {
heroes: Hero[];
}
```
The local variables `i` and `isFirst` are determined to have a type of
`Hero`, when actually their types are `number` and `boolean`,
respectively.
This commit fixes this bug by checking if the value of a variable in an
`*ngFor` expression is known to be an export and assigning the variable
the type of that export value. Only if the variable does not alias an
export is it typed with the binding value of the `*ngFor` expression.
Closes https://github.com/angular/vscode-ng-language-service/issues/460
PR Close#34089
This allows us to update the version of the package in a single place for all tests.
Notable exemption of this is aio which currently doesn't depend on anything installed in the root.
PR Close#34002
Previously, the Angular AOT compiler would always add a
`ɵprov` to injectables. But in ngcc this resulted in duplicate `ɵprov`
properties since published libraries already have this property.
Now in ngtsc, trying to add a duplicate `ɵprov` property is an error,
while in ngcc the additional property is silently not added.
// FW-1750
PR Close#34085
Prior to this commit, the unknown element can happen twice for AOT-compiled components: once during compilation and once again at runtime. Due to the fact that `schemas` information is not present on Component and NgModule defs after AOT compilation, the second check (at runtime) may fail, even though the same check was successful at compile time. This commit updates the code to avoid the second check for AOT-compiled components by checking whether `schemas` information is present in a logic that executes the unknown element check.
PR Close#34024
When creating synthesized tagged template literals, one must provide both
the "cooked" text and the "raw" (unparsed) text. Previously there were no
good APIs for creating the AST nodes with raw text for such literals.
Recently the APIs were improved to support this, and they do an extra
check to ensure that the raw text parses to be equal to the cooked text.
It turns out there is a bug in this check -
see https://github.com/microsoft/TypeScript/issues/35374.
This commit works around the bug by synthesizing a "head" node and morphing
it by changing its `kind` into the required node type.
// FW-1747
PR Close#34065
With Angular CLI version 9 RC 3 we can run a single migration for a package using the name of the migration schematic.
We need to pass the schematic name as a value to the `migrate-only` option.
Ex:
```
ng update @angular/core --migrate-only migration-v9-undecorated-classes-with-di
```
See: https://github.com/angular/angular-cli/pull/16174
PR Close#33958
This bring is changes to the @nodejs repository required for https://github.com/angular/angular/pull/33927. See release notes for more details: https://github.com/bazelbuild/rules_nodejs/releases/tag/0.41.0.
rules_nodejs is approaching 1.0 and breaking changes for that release are being made more frequently. In this release, the ts_devserver API changed and it no longer injects html script tags into a provided index.html file. The diff on this commit is large as this breaking change affects quite a few tests.
Also note that we don’t update @angular/bazel schematics and integration/bazel as 0.41.0 is not a recommended update for angular users yet due to the breaking changes in ts_devserver & web_package (now named pkg_web). When a suitable plain npm package that is in progress is finished then it will be possible to easily replace the html injection functionality removed from ts_devserver & pkg_web.
PR Close#33996
Commit 53fc2ed8bf added support for
determining index types accessed using index signatures, but did not
include support for index types accessed using dot notation:
```typescript
const obj<T>: { [key: string]: T };
obj['stringKey']. // gets `T.` completions
obj.stringKey. // did not peviously get `T.` completions
```
This adds support for determining an index type accessed via dot
notation by rigging an object's symbol table to return the string index
signature type a property access refers to, if that property does not
explicitly exist on the object. This is very similar to @ivanwonder's
work in #29811.
`SymbolWrapper` now takes an additional parameter to explicitly set the
type of the symbol wrapped. This is done because
`SymbolTableWrapper#get` only has access to the symbol of the index
type, _not_ the index signature symbol itself. An attempt to get the
type of the index type will give an error.
Closes#29811
Closes https://github.com/angular/vscode-ng-language-service/issues/126
PR Close#33884
Now that all compile decisions are determined by the define=angular_ivy_enabled
flag, we can remove the setting of the define=compile flag throughout the repo.
PR Close#33983
Use angular_ivy_enabled to determine if Ivy is being used for the ivy_test_selector.ts symbols.
Additionally, remove the reflect_metadata genrules as we not longer have a "jit" compile option
so all possible invocations result in the same generated file. Instead we can just commit this
file.
PR Close#33983
We need to migrate to using angular_ivy_enabled value to determine whether to use
Ivy or ViewEngine for package building scripts and for size-tracking and
symbol-extract tooling.
PR Close#33983
Since config=ivy now sets the define=compile flag and the define=angular_ivy_enabled
flag to cause usage of Ivy, we can update all of the documentation and scripts that
reference compile=aot to use config=ivy.
PR Close#33983
Beginning of migration away from --define=compile=* to --define=angular_ivy_enabled=*.
Additionally, to make it clearer to developers, we will encourage use of --config=ivy
instead of directy setting the --define flag, this abstraction will allow us more
flexibility as we move foward with relation to our compile decisions at build time.
PR Close#33983
Prior to this commit, there was a runtime check in i18n logic to make sure "other" case is always present in an ICU. That was not a requirement in View Engine, so ICUs that previously worked may produce errors. This commit removes that restriction and adds support for ICUs without "other" cases.
PR Close#34042
Move a view only if it would end up at a different place.
Otherwise we would do unnecessary processing like DOM manipulation, query notifications etc.
Thanks to @pkozlowski-opensource for the change.
PR Close#34052
When inserting a `viewRef` it is possible to not provide
an `index`, which is regarded as appending to the end of
the container.
If the `viewRef` already exists in the container, then
this results in a move. But there was a fault in the logic
that computed where to insert the `viewRef` that did not
account for the fact that the `viewRef` was already in
the container, so the insertion `index` was outside the
bounds of the array.
Fixes#33924
PR Close#34052
Prior to this commit, all styles extracted from Component's template (defined using <style> tags) were ignored by JIT compiler, so only `styles` array values defined in @Component decorator were used. This change updates JIT compiler to take styles extracted from the template into account. It also ensures correct order where `styles` array values are applied first and template styles are applied second.
PR Close#34017
Previously if a type was returning itself it would cause an infinite loop in tsickle. We worked around it with a type that alises to `any`. Now that the issue has been resolved in tsickle, we can clean up the workaround.
PR Close#34019
When performing diagnostic checks or completions, we should take into
account members and properties in the base class, if any. Otherwise, the
language service will produce a false error.
PR closes https://github.com/angular/vscode-ng-language-service/issues/93
PR Close#34041
This commit fixes a compatibility bug where pre-order lifecycle
hooks (onInit, doCheck, OnChanges) for directives on the same
host node were executed based on the order the directives were
matched, rather than the order the directives were instantiated
(i.e. injection order).
This discrepancy can cause issues with forms, where it is common
to inject NgControl and try to extract its control property in
ngOnInit. As the NgControl directive is injected, it should be
instantiated before the control value accessor directive (and
thus its hooks should run first). This ensures that the NgControl
ngOnInit can set up the form control before the ngOnInit
for the control value accessor tries to access it.
Closes#32522
PR Close#34026
These apis have been deprecated in v8, so they should stick around till v10,
but since they are defunct we are removing them early so that they don't take up payload size.
PR Close#33949
In ViewEngine we were only generating code for exported classes, however with Ivy we do it no matter whether the class has been exported or not. These changes add an extra flag that allows consumers to opt into the ViewEngine behavior. The flag works by treating non-exported classes as if they're set to `jit: true`.
Fixes#33724.
PR Close#33921
Micro-benchmarks were broken after we've introduced concept of
DECLARATION_COMPONENT_VIEW on LView (after this change embedded
views must have a pointer to a parent LView).
PR Close#34031
The root view case is already covered by the existing code in the
getRenderParent function so no need to have an explicit checks
(and associated memory reads) again.
PR Close#33988
We need to make is_ivy_enabled public to allow the internal i18n
build rule to rely on it rather than relying on compile_strategy.
After we move the internal i18n rule to rely on is_ivy_enabled,
compile_strategy can then be removed.
PR Close#33992
Previously, our incremental build system kept track of the changes between
the current compilation and the previous one, and used its knowledge of
inter-file dependencies to evaluate the impact of each change and emit the
right set of output files.
However, a problem arose if the compiler was not able to extract a
dependency graph successfully. This typically happens if the input program
contains errors. In this case the Angular analysis part of compilation is
never executed.
If a file changed in one of these failed builds, in the next build it
appears unchanged. This means that the compiler "forgets" to emit it!
To fix this problem, the compiler needs to know the set of changes made
_since the last successful build_, not simply since the last invocation.
This commit changes the incremental state system to much more explicitly
pass information from the previous to the next compilation, and in the
process to keep track of changes across multiple failed builds, until the
program can be analyzed successfully and the results of those changes
incorporated into the emit plan.
Fixes#32214
PR Close#33971
Previously the visible compiler name during the ng_module build action was
ngc/ngtsc. These names however are only really known to the compiler team.
Instead we should use more general terms for which compiler is used to match
how we speak about compiler choices.
PR Close#33995
This PR brings a couple of changes;
- Removes undeed dependencies in bazel targets such as `//packages/common` & `//packages/core`
- Removes RxJs usage
- Adds `document-register-element` to architect test targets
- Use @schematics/angular helpers
- Uses the standard `$source": "projectName"` to get the projectName, which is defined in the `schema.json`
- Use workspace writer to update the workspace config
PR Close#33723
Under bazel and Ivy we don't need the shim files to be emmited by default.
We still need to the shims for blaze however because google3 code imports them.
This improves build latency by 1-2 seconds per ng_module target.
PR Close#33765
Before creating a mutating http request, service-worker
invalidates lru cache entry and writes to cache storage.
Therefore, cache storage failure can prevent making post requests.
Fix this by catching and logging cache error, add a test case.
Fixes#33793
PR Close#33930
In a package.json file, the "typings" or "types" field could be an array
of typings files. ngcc would previously crash unexpectedly for such
packages, as it assumed that the typings field would be a string. This
commit lets ngcc skip over such packages, as having multiple typing
entry-points is not supported for Angular packages so it is safe to
ignore them.
Fixes#33646
PR Close#33973
The url_tree equalQueryParams and containsQueryParam methods did not handle query params that has arrays, which resulted in the routerLinkActive to not behave as expected, change was made to ensure query params with arrays are handled correctly
fixes#22223
PR Close#22666
This introduces a second possible define flag for informing bazel to build with ivy, but
does not remove the old `compile=aot` flag for configuration.
This is the first step in migrating away from using the `compile=aot` define flag.
PR Close#33975
The assertion that we have in the `directiveInject` instruction is too restrictive and we came across some pattern where it throws unnecessarily. This commit removes that assertion for now and more detailed investigation is needed to decide is we need to restrict the set of TNodeType again.
This commit also adds a test which triggered the TNodeType.View to come up in the `directiveInject` instruction, so it might be useful to avoid regressions during further refactoring.
PR Close#33948
In 5d5c94d83, the deprecated `versionedFiles` option from the SW
asset-group configuration in `ngsw-config.json`. As a result, the
option would be silently ignored and the runtime behavior of the SW
would change (i.e. some files might not be cached and available offline
any more). This change could be easily go unnoticed by the developer.
This commit ensures this does not happen by throwing a build-time error,
when detecting the unsupported `versionedFiles` option with an error
message prompting the user to use the `files` option instead.
Jira issue: [FW-1727](https://angular-team.atlassian.net/browse/FW-1727)
PR Close#33903
Recently the ngtsc translator was modified to be more `ScriptTarget`
aware, which basically means that it will not generate non-ES5 code
when the output format is ES5 or similar.
This commit enhances that change by also "downleveling" localized
messages. In ES2015 the messages use tagged template literals, which
are not available in ES5.
PR Close#33857
Due to the fact that Tsickle runs between analyze and transform phases in Angular, Tsickle may transform nodes (add comments with type annotations for Closure) that we captured during the analyze phase. As a result, some patterns where a function is returned from another function may trigger automatic semicolon insertion, which breaks the code (makes functions return `undefined` instead of a function). In order to avoid the problem, this commit updates the code to wrap all functions in some expression ("privders" and "viewProviders") in parentheses. More info can be found in Tsickle source code here: d797426257/src/jsdoc_transformer.ts (L1021)
PR Close#33609
When ngtsc comes across a source file during partial evaluation, it
would determine all exported symbols from that module and evaluate their
values greedily. This greedy evaluation strategy introduces unnecessary
work and can fall into infinite recursion when the evaluation result of
an exported expression would circularly depend on the source file. This
would primarily occur in CommonJS code, where the `exports` variable can
be used to refer to an exported variable. This variable would be
resolved to the source file itself, thereby greedily evaluating all
exported symbols and thus ending up evaluating the `exports` variable
again. This variable would be resolved to the source file itself,
thereby greedily evaluating all exported symbols and thus ending u
evaluating the `exports` variable again. This variable would be
resolved to the source file itself, thereby greedily evaluating all
exported symbols and thus ending up evaluating the `exports` variable
again. This variable would be resolved to the source file itself,
thereby greedily evaluating all exported symbols and thus ending up
evaluating the `exports` variable again. This went on for some time
until all stack frames were exhausted.
This commit introduces a `ResolvedModule` that delays the evaluation of
its exports until they are actually requested. This avoids the circular
dependency when evaluating `exports`, thereby fixing the issue.
Fix#33734
PR Close#33772
The template type checker generates code to check directive inputs and
outputs, whose name may contain characters that can not be used as
identifier in TypeScript. Prior to this change, such names would be
emitted into the generated code as is, resulting in invalid code and
unexpected template type check errors.
This commit fixes the bug by representing the potentially invalid names
as string literal instead of raw identifier.
Fixes#33590
PR Close#33741
NgModule compilation in JIT mode (that is also used in TestBed) caches module scopes on NgModule defs (using `transitiveCompileScopes` field). Module overrides (defined via TestBed.overrideModule) may invalidate this data by adding/removing items in `declarations` list. This commit forces TestBed to recalculate transitive scopes in case module overrides are present, so TestBed always gets the most up-to-date information.
PR Close#33787
This change enables "var(--my-var)" to pass through the style sanitizer.
After consulation with our security team, allowing these doesn't create
new attack vectors, so the sanitizer doesn't need to strip them.
Fixes parts of #23485 related to the sanitizer, other use cases discussed
there related to binding have been addressed via other changes to the
class and style handling in the runtime.
Closes#23485
PR Close#33841
This commit transforms the setClassMetadata calls generated by ngtsc from:
```typescript
/*@__PURE__*/ setClassMetadata(...);
```
to:
```typescript
/*@__PURE__*/ (function() {
setClassMetadata(...);
})();
```
Without the IIFE, terser won't remove these function calls because the
function calls have arguments that themselves are function calls or other
impure expressions. In order to make the whole block be DCE-ed by terser,
we wrap it into IIFE and mark the IIFE as pure.
It should be noted that this change doesn't have any impact on CLI* with
build-optimizer, which removes the whole setClassMetadata block within
the webpack loader, so terser or webpack itself don't get to see it at
all. This is done to prevent cross-chunk retention issues caused by
webpack's internal module registry.
* actually we do expect a short-term size regression while
https://github.com/angular/angular-cli/pull/16228
is merged and released in the next rc of the CLI. But long term this
change does nothing to CLI + build-optimizer configuration and is done
primarly to correct the seemingly correct but non-function PURE annotation
that builds not using build-optimizer could rely on.
PR Close#33337
NgModules in Ivy have a definition which contains various different bits
of metadata about the module. In particular, this metadata falls into two
categories:
* metadata required to use the module at runtime (for bootstrapping, etc)
in AOT-only applications.
* metadata required to depend on the module from a JIT-compiled app.
The latter metadata consists of the module's declarations, imports, and
exports. To support JIT usage, this metadata must be included in the
generated code, especially if that code is shipped to NPM. However, because
this metadata preserves the entire NgModule graph (references to all
directives and components in the app), it needs to be removed during
optimization for AOT-only builds.
Previously, this was done with a clever design:
1. The extra metadata was added by a function called `setNgModuleScope`.
A call to this function was generated after each NgModule.
2. This function call was marked as "pure" with a comment and used
`noSideEffects` internally, which causes optimizers to remove it.
The effect was that in dev mode or test mode (which use JIT), no optimizer
runs and the full NgModule metadata was available at runtime. But in
production (presumably AOT) builds, the optimizer runs and removes the JIT-
specific metadata.
However, there are cases where apps that want to use JIT in production, and
still make an optimized build. In this case, the JIT-specific metadata would
be erroneously removed. This commit solves that problem by adding an
`ngJitMode` global variable which guards all `setNgModuleScope` calls. An
optimizer can be configured to statically define this global to be `false`
for AOT-only builds, causing the extra metadata to be stripped.
A configuration for Terser used by the CLI is provided in `tooling.ts` which
sets `ngJitMode` to `false` when building AOT apps.
PR Close#33671
The Ivy template type-checker is capable of inferring the type of a
structural directive (such as NgForOf<T>). Previously, this was done with
fullTemplateTypeCheck: true, even if strictTemplates was false. View Engine
previously did not do this inference, and so this causes breakages if the
type of the template context is not what the user expected.
In particular, consider the template:
```html
<div *ngFor="let user of users as all">
{{user.index}} out of {{all.length}}
</div>
```
As long as `users` is an array, this seems reasonable, because it appears
that `all` is an alias for the `users` array. However, this is misleading.
In reality, `NgForOf` is rendered with a template context that contains
both a `$implicit` value (for the loop variable `user`) as well as a
`ngForOf` value, which is the actual value assigned to `all`. The type of
`NgForOf`'s template context is `NgForContext<T>`, which declares `ngForOf`'s
type to be `NgIterable<T>`, which does not have a `length` property (due to
its incorporation of the `Iterable` type).
This commit stops the template type-checker from inferring template context
types unless strictTemplates is set (and strictInputTypes is not disabled).
Fixes#33527.
PR Close#33537
This commit changes the reporting of watch mode diagnostics for ngtsc to use
the same formatting as non-watch mode diagnostics. This prints rich and
contextual errors even in watch mode, which previously was not the case.
Fixes#32213
PR Close#33862
Previously, the ngtsc compiler attempted to reuse analysis work from the
previous program during an incremental build. To do this, it had to prove
that the work was safe to reuse - that no changes made to the new program
would invalidate the previous analysis.
The implementation of this had a significant design flaw: if the previous
program had errors, the previous analysis would be missing significant
information, and the dependency graph extracted from it would not be
sufficient to determine which files should be re-analyzed to fill in the
gaps. This often meant that the build output after an error was resolved
would be wholly incorrect.
This commit switches ngtsc to take a simpler approach to incremental
rebuilds. Instead of attempting to reuse prior analysis work, the entire
program is re-analyzed with each compilation. This is actually not as
expensive as one might imagine - analysis is a fairly small part of overall
compilation time.
Based on the dependency graph extracted during this analysis, the compiler
then can make accurate decisions on whether to emit specific files. A new
suite of tests is added to validate behavior in the presence of source code
level errors.
This new approach is dramatically simpler than the previous algorithm, and
should always produce correct results for a semantically correct program.s
Fixes#32388Fixes#32214
PR Close#33862
Originally, QueryList implemented Iterable and provided a Symbol.iterator
on its prototype. This caused issues with tree-shaking, so QueryList was
refactored and the Symbol.iterator added in its constructor instead. As
part of this change, QueryList no longer implemented Iterable directly.
Unfortunately, this meant that QueryList was no longer assignable to
Iterable or, consequently, NgIterable. NgIterable is used for NgFor's input,
so this meant that QueryList was not usable (in a type sense) for NgFor
iteration. View Engine's template type checking would not catch this, but
Ivy's did.
As a fix, this commit adds the declaration (but not the implementation) of
the Symbol.iterator function back to QueryList. This has no runtime effect,
so it doesn't affect tree-shaking of QueryList, but it ensures that
QueryList is assignable to NgIterable and thus usable with NgFor.
Fixes#29842
PR Close#33536
Previously, the compiler assumed that all TS files logically within a
project existed under one or more "root directories". If the TS compiler
option `rootDir` or `rootDirs` was set, they would dictate the root
directories in use, otherwise the current directory was used.
Unfortunately this assumption was unfounded - it's common for projects
without explicit `rootDirs` to import from files outside the current
working directory. In such cases the `LogicalProjectStrategy` would attempt
to generate imports into those files, and fail. This would lead to no
`ReferenceEmitStrategy` being able to generate an import, and end in a
compiler assertion failure.
This commit introduces a new strategy to use when there are no `rootDirs`
explicitly present, the `RelativePathStrategy`. It uses simpler, filesystem-
relative paths to generate imports, even to files above the current working
directory.
Fixes#33659Fixes#33562
PR Close#33828
This commit adds the ability to change directories using the compiler's
internal filesystem abstraction. This is a prerequisite for writing tests
which are sensitive to the current working directory.
In addition to supporting the `chdir()` operation, this commit also fixes
`getDefaultLibLocation()` for mock filesystems to not assume `node_modules`
is in the current directory, but to resolve it similarly to how Node does
by progressively looking higher in the directory tree.
PR Close#33828
TNode.inputs are initialised during directives resolution now so we know early
if a node has directives with inputs or no. We don't need to use undefined value
as an indicator that inputs were not resolved yet.
PR Close#33798
Before this change a public name of a directive's input
was stored in 2 places:
- as a key of an object on TNode.index;
- as a value of PropertyAliasValue at the index 1
This PR changes the data structure so the public name is stored
only once as a key on TNode.index. This saves one array entry
for each and every directive input.
PR Close#33798
Adds support for chaining of `styleProp`, `classProp` and `stylePropInterpolateX` instructions whenever possible which should help generate less code. Note that one complication here is for `stylePropInterpolateX` instructions where we have to break into multiple chains if there are other styling instructions inbetween the interpolations which helps maintain the execution order.
PR Close#33837
This refactorings clearly separates the first and subsequent creation execution
of the `template` instruction. This approach has the following benefits:
- it is clear what happens during the first vs. subsequent executions;
- we can avoid several memory reads and checks after the first creation pass
(there is measurable performance improvement on various benchmarks);
- the template instructions becomes smaller and should become a candidate
for optimisations / inlining faster;
PR Close#33856
The ReflectionHost supports enumeration of constructor parameters, and one
piece of information it returns describes the origin of the parameter's
type. Parameter types come in two flavors: local (the type is not imported
from anywhere) or non-local (the type comes via an import).
ngcc incorrectly classified all type parameters as 'local', because in the
source files that ngcc processes the type parameter is a real ts.Identifer.
However, that identifier may still have come from an import and thus might
be non-local.
This commit changes ngcc's ReflectionHost(s) to properly recognize and
report these non-local type references.
Fixes#33677
PR Close#33901
`ng_package` rule has an implicitly optional depedency on terser a48573efe8/packages/bazel/src/ng_package/ng_package.bzl (L36)
When using this rule without terser being available we get the below error;
```
ERROR: /home/circleci/ng/modules/express-engine/BUILD.bazel:22:1: every rule of type ng_package implicitly depends upon the target '@npm//terser/bin:terser', but this target could not be found because of: no such package '@npm//terser/bin': BUILD file not found in directory 'terser/bin' of external repository @npm. Add a BUILD file to a directory to mark it as a package.
ERROR: Analysis of target '//modules/express-engine:npm_package' failed; build aborted: no such package '@npm//terser/bin': BUILD file not found in directory 'terser/bin' of external repository @npm. Add a BUILD file to a directory to mark it as a package.
```
PR Close#33891
Since i18n messages are mapped to `$localize` tagged template strings,
the "raw" version must be properly escaped. Otherwise TS will throw an
error such as:
```
Error: Debug Failure. False expression: Expected argument 'text' to be the normalized (i.e. 'cooked') version of argument 'rawText'.
```
This commit ensures that we properly escape these raw strings before creating
TS AST nodes from them.
PR Close#33820
The `:` char is used as a metadata marker in `$localize` messages.
If this char appears in the metadata it must be escaped, as `\:`.
Previously, although the `:` char was being escaped, the TS AST
being generated was not correct and so it was being output double
escaped, which meant that it appeared in the rendered message.
As of TS 3.6.2 the "raw" string can be specified when creating tagged
template AST nodes, so it is possible to correct this.
PR Close#33820
When asking for a ViewContainerRef on <ng-container> we do reuse <ng-container> comment
node as a LContainer's anachor. Before this fix the act of re-using a <ng-container>'s
comment node would result in this comment node being re-appended to the DOM in the wrong
place. With the fix in this PR we make sure that re-using <ng-container>'s comment node
doesn't result in unwanted DOM manipulation (ng-gontainer's comment node is already part
of the DOM and doesn't have to be re-created / re-appended).
PR Close#33816
In View Engine, providers which neither used `useValue`, `useClass`,
`useFactory` or `useExisting`, were interpreted differently.
e.g.
```
{provide: X} -> {provide: X, useValue: undefined}, // this is how it works in View Engine
{provide: X} -> {provide: X, useClass: X}, // this is how it works in Ivy
```
The missing-injectable migration should migrate such providers to the
explicit `useValue` provider. This ensures that there is no unexpected
behavioral change when updating to v9.
PR Close#33709
In #32902 a bug was supposedly fixed where internal classes as used
within `ModuleWithProviders` are publicly exported, even when the
typings file already contained the generic type on the
`ModuleWithProviders`. This fix turns out to have been incomplete, as
the `ModuleWithProviders` analysis is not done when not processing the
typings files.
The effect of this bug is that formats that are processed after the
initial format had been processed would not have exports for internal
symbols, resulting in "export '...' was not found in '...'" errors.
This commit fixes the bug by always running the `ModuleWithProviders`
analyzer. An integration test has been added that would fail prior to
this change.
Fixes#33701
PR Close#33875
ngcc has a basic integration test infrastructure that downlevels
TypeScript code into bundle formats that need to be processed by ngcc.
Until now, only ES5 bundles were created with a flat structure, however
more complex scenarios require an APF-like layout containing multiple
bundle formats.
PR Close#33875
Some declaration files may not be referenced from an entry-point's
main typings file, as it may declare types that are only used internally.
ngcc has logic to include declaration files based on all source files,
to ensure internal declaration files are available.
For packages following APF layout, however, this logic was insufficient.
Consider an entry-point with base path of `/esm2015/testing` and typings
residing in `/testing`, the file
`/esm2015/testing/src/nested/internal.js` has its typings file at
`/testing/src/nested/internal.d.ts`. Previously, the declaration was
assumed to be located at `/esm2015/testing/testing/internal.d.ts` (by
means of `/esm2015/testing/src/nested/../../testing/internal.d.ts`)
which is not where the declaration file can be found. This commit
resolves the issue by looking in the correct directory.
PR Close#33875
In flat bundle formats, multiple classes that have the same name can be
suffixed to become unique. In ES5-like bundles this results in the outer
declaration from having a different name from the "implementation"
declaration within the class' IIFE, as the implementation declaration
may not have been suffixed.
As an example, the following code would fail to have a `Directive`
decorator as ngcc would search for `__decorate` calls that refer to
`AliasedDirective$1` by name, whereas the `__decorate` call actually
uses the `AliasedDirective` name.
```javascript
var AliasedDirective$1 = /** @class */ (function () {
function AliasedDirective() {}
AliasedDirective = tslib_1.__decorate([
Directive({ selector: '[someDirective]' }),
], AliasedDirective);
return AliasedDirective;
}());
```
This commit fixes the problem by not relying on comparing names, but
instead finding the declaration and matching it with both the outer
and inner declaration.
PR Close#33878
Previously, indexing a container type would not return completions for
the indexed type because for every TypeScript type, the recorded index
type was always marked as `undefined`, regardless of the index
signature.
This PR now returns the index type of TypeScript containers with numeric
or string index signatures. This allows use to generate completions for
arrays and defined index types:
```typescript
interface Container<T> {
[key: string]: T;
}
const ctr: Container<T>;
ctr['stringKey']. // gives `T.` completions
const arr: T[];
arr[0]. // gives `T.` completions
```
Note that this does _not_ provide completions for properties indexed by
string literals, e.g.
```typescript
interface Container<T> {
foo: T;
}
const ctr: Container<T>;
ctr['foo']. // does not give `T.` completions
```
Closes angular/vscode-ng-language-service#110
Closes angular/vscode-ng-language-service#277
PR Close#33775
In ccc76f749, `@angular/platform-webworker` and
`@angular/platform-webworker-dynamic` were deprecated (i.e. by
deprecating all their public APIs). However, some public
`@angular/platform-webworker` APIs were accidentally missed,
additionally resulting in the package itself not showing up as
deprecated on angular.io.
This commit fixes it by marking those remaining public APIs as
deprecated.
PR Close#33824
This commit fixes a bug whereby completions for attribute values are only
provided for directives that support the micro-syntax format, all other
bindings are ignored.
I'm not sure if this is a regresssion or a bug, because there were no
tests prior to this.
PR Close#33839
The earlier update to nodejs rules 0.40.0 fixes the cross-platform RBE issues with nodejs_binary. This commit adds a work-around for rules_webtesting cross-platform RBE issues.
PR Close#33708
This commit fixes a few issues with helper method
`getBuiltInTypeFromTsType`.
1. The function is wrongly named. It should be the other way round.
2. The ts.Type returned by the function should not contain any value.
This is because for some data types like Number and String, the
SourceFile (context.node) is not the correct value. Value is never
needed for program correctness in this case.
PR Close#33778
This commit fixes a bug brought up by @andrius-pra whereby the language
service host would recompute the analyzed modules even when none of the
source files changes. This is due to a bug in our unit test that
precludes non-TS files from incrementing the project version.
Consequently, when the external template is updated, the program remains
the same.
With the bug fixed, the next step is to figure out if any source files
have been added / changed / removed since the last computation. The
previously analyzed could be safely retained only when none of these
operations happen.
PR Close#33806
The method `getTemplateReferences()` appears in both the LanguageService
interface and LanguageServiceHost interface. It should belong in the
latter and not the former, since the former deals with the semantics of
the language and not the mechanics.
PR Close#33807
If the application is not running directly in the browser, e.g.
universal or app-shell, then the `$localize` import must be
adding to a different file than for normal browser applications.
This commit adds more information about this to avoid any
confusion.
// FW-1557
PR Close#33826
Now that terser_minified supports args as of nodejs rules 0.40.0, ng_rollup_bundle can updated to the pass —comments /a^/ to args can turn off all comments and maintain the current ng_rollup_bundle behavior with the latest version fo terser. //packages/core/test/bundling/todo:bundle.min.js size test passes with this fix.
Tho not strictly necessary to update terser, this will be a rough edge when someone does try it as it is not obvious why the //packages/core/test/bundling/todo:bundle.min.js size test fails. Updating now should save time in the future by not hitting this issue.\
This change also affect ng_package output as the default comments that are preserved by terser are now Comments with @preserve, @license, @cc_on as well as comments starting with /*! and /**! are now preserved by default.. (https://github.com/terser/terser/blob/master/CHANGELOG.md). Example ng_package golden file also updated as there are not some /*! comments preserved that were in older versions of terser.
PR Close#33835
Prior to this commit the assert that we have in `directiveInject` (assert introduced recently) didn't include IcuContainer TNode type and as a result, the error is thrown in case pipes with dependencies are used inside ICUs. This commit extends the assert to allow for IcuContainer TNode types.
PR Close#33832
This commit moves the `setLContainerActiveIndex` and `getLContainerActiveIndex` functions used in a few files to a common `util/view_util.ts` lib to avoid cyclical dependency while importing `instructions/container.ts` where these functions located originally.
PR Close#33831
The ng-add schematic for `@angular/bazel` should set up
the latest Bazel version v1.1.0 that contains fixes for
windows. e.g. 618e5a28f7
PR Close#33813
Updates Bazel to the latest stable version. Bazel 1.1.0
supposedly fixes a permission bug in Windows. Hence we
should try to update and see if that fixes the bug.
It's generally good to be up to date. See potential bug
fix commit:
618e5a28f7.
PR Close#33813
The following files are consumed only by the language service and do not
have to be in compiler-cli:
1. expression_diagnostics.ts
2. expression_type.ts
3. typescript_symbols.ts
4. symbols.ts
PR Close#33809
`<div class="hero-list" *ngIf="heroes else loading">` defines `heroes` as condition, but `hero-list` is used as condition in the transformed code `<ng-template [ngIf]="heroes" [ngIfElse]="loading">`.
PR Close#33425
The url_tree equalQueryParams and containsQueryParam methods did not handle query params that has arrays, which resulted in the routerLinkActive to not behave as expected, change was made to ensure query params with arrays are handled correctly
fixes#22223
PR Close#22666
Previously, ngcc's `Renderer` would add some constants in the processed
files which were emitted as ES2015 code (e.g. `const` declarations).
This would result in invalid ES5 generated code that would break when
run on browsers that do not support the emitted format.
This commit fixes it by adding a `printStatement()` method to
`RenderingFormatter`, which can convert statements to JavaScript code in
a suitable format for the corresponding `RenderingFormatter`.
Additionally, the `translateExpression()` and `translateStatement()`
ngtsc helper methods are augmented to accept an extra hint to know
whether the code needs to be translated to ES5 format or not.
Fixes#32665
PR Close#33514
While processing class metadata, ngtsc generates a `setClassMetadata()`
call which (among other things) contains info about property decorators.
Previously, processing getter/setter pairs with some of ngcc's
`ReflectionHost`s resulted in multiple metadata entries for the same
property, which resulted in duplicate object keys, which in turn causes
an error in ES5 strict mode.
This commit fixes it by ensuring that there are no duplicate property
names in the `setClassMetadata()` calls.
In addition, `generateSetClassMetadataCall()` is updated to treat
`ClassMember#decorators: []` the same as `ClassMember.decorators: null`
(i.e. omitting the `ClassMember` from the generated `setClassMetadata()`
call). Alternatively, ngcc's `ReflectionHost`s could be updated to do
this transformation (`decorators: []` --> `decorators: null`) when
reflecting on class members, but this would require changes in many
places and be less future-proof.
For example, given a class such as:
```ts
class Foo {
@Input() get bar() { return 'bar'; }
set bar(value: any) {}
}
```
...previously the generated `setClassMetadata()` call would look like:
```ts
ɵsetClassMetadata(..., {
bar: [{type: Input}],
bar: [],
});
```
The same class will now result in a call like:
```ts
ɵsetClassMetadata(..., {
bar: [{type: Input}],
});
```
Fixes#30569
PR Close#33514
Previously, due to a bug a `Context` with `isStatement: false` could be
returned in places where a `Context` with `isStatement: true` was
requested. As a result, some statements would be unnecessarily wrapped
in parenthesis.
This commit fixes the bug in `Context#withStatementMode` to always
return a `Context` with the correct `isStatement` value. Note that this
does not have any impact on the generated code other than avoiding some
superfluous parenthesis on certain statements.
PR Close#33514
Currently if a consumer does something like the following, the object literal will be shared across the two elements and any instances of the component template. The same applies to array literals:
```
<div [someDirective]="{}"></div>
<div [someDirective]="{}"></div>
```
These changes make it so that we generate a pure function even if an object is constant so that each instance gets its own object.
Note that the original design for this fix included moving the pure function factories into the `consts` array. In the process of doing so I realized that pure function are also used inside of directive host bindings which means that we don't have access to the `consts`.
These changes also:
* Fix an issue that meant that the `pureFunction0` instruction could only be run during creation mode.
* Make the `getConstant` utility slightly more convenient to use. This isn't strictly required for these changes to work, but I had made it as a part of a larger refactor that I ended up reverting.
PR Close#33705
This is a breaking change in nodejs rules 0.40.0 as part of the API review & cleanup for the 1.0 release. Their APIs are identical as ts_web_test was just karma_web_test without the config_file attribute.
PR Close#33802
Prior to this change, setting style prop value to undefined or empty string would not result in resetting prop value in case the style prop is defined using [style.prop.px] syntax. The problem is that the check for empty value (and thus reseting the value) considered successful only in case of `null` value. This commit updates the check to use `isStylingValueDefined` function that also checks for undefined and empty string.
PR Close#33780
The reflection hosts have been updated to support the following
code forms, which were found in some minified library code:
* The class IIFE not being wrapped in parentheses.
* Calls to `__decorate()` being combined with the IIFE return statement.
PR Close#33777
Previously we only removed `__decorate()` calls that looked like:
```
SomeClass = __decorate(...);
```
But in some minified scenarios this call gets wrapped up with the
return statement of the IIFE.
```
return SomeClass = __decorate(...);
```
This is now removed also, leaving just the return statement:
```
return SomeClass;
```
PR Close#33777
The `dist/` directory has a duplicate `package.json` pointing to the
same files, which (under certain configurations) can causes ngcc to try
to process the files twice and fail.
This commit adds a default ngcc config for `ng2-dragula` to ignore the
`dist/` entry-point.
Fixes#33718
PR Close#33797
Prior to this change, ComponentFactory.create function invocation in Ivy retained the content of the host element (in case host element reference or CSS seelctor is provided as an argument). This behavior is different in View Engine, where the content of the host element was cleared, except for the case when ShadowDom encapsulation is used (to make sure native slot projection works). This commit aligns Ivy and View Engine and makes sure the host element is cleared before component content insertion.
PR Close#33487
During incremental compilations, ngtsc needs to know which metadata
from a previous compilation can be reused, versus which metadata has to
be recomputed as some dependency was updated. Changes to
directives/components should cause the NgModule in which they are
declared to be recompiled, as the NgModule's compilation is dependent
on its directives/components.
When a dependent source file of a directive/component is updated,
however, a more subtle dependency should also cause to NgModule's source
file to be invalidated. During the reconciliation of state from a
previous compilation into the new program, the component's source file
is invalidated because one of its dependency has changed, ergo the
NgModule needs to be invalidated as well. Up until now, this implicit
dependency was not imposed on the NgModule. Additionally, any change to
a dependent file may influence the module scope to change, so all
components within the module must be invalidated as well.
This commit fixes the bug by introducing additional file dependencies,
as to ensure a proper rebuild of the module scope and its components.
Fixes#32416
PR Close#33522
When the Angular compiler is operated through the ngc binary in watch
mode, changing a template in an external file would not cause the
component to be recompiled if Ivy is enabled.
There was a problem with how a cached compiler host was present that was
unaware of the changed resources, therefore failing to trigger a
recompilation of a component whenever its template changes. This commit
fixes the issue by ensuring that information about modified resources is
correctly available to the cached compiler host.
Fixes#32869
PR Close#33551
The `ngInjectableDef` property was renamed to `ɵprov`, but core must
still support both because there are published libraries that use the
older term.
We are only interested in such properties that are defined directly on
the type being injected, not on base classes. So there is a check that
the defintion is specifically for the given type.
Previously if you tried to inject a class that had `ngInjectableDef` but
also inherited `ɵprov` then the check would fail on the `ɵprov` property
and never even try the `ngInjectableDef` property resulting in a failed
injection.
This commit fixes this by attempting to find each of the properties
independently.
Fixes https://github.com/angular/ngcc-validation/pull/526
PR Close#33732
Chains multiple listener instructions on a particular element into a single call which results in less generated code. Also handles listeners on templates, host listeners and synthetic host listeners.
PR Close#33720
Most of the use of `document` in the framework is within
the DI so they just inject the `DOCUMENT` token and are done.
Ivy is special because it does not rely upon the DI and must
get hold of the document some other way. There are a limited
number of places relevant to ivy that currently consume a global
document object.
The solution is modelled on the `LOCALE_ID` approach, which has
`getLocaleId()` and `setLocaleId()` top-level functions for ivy (see
`core/src/render3/i18n.ts`). In the rest of Angular (i.e. using DI) the
`LOCALE_ID` token has a provider that also calls setLocaleId() to
ensure that ivy has the same value.
This commit defines `getDocument()` and `setDocument() `top-level
functions for ivy. Wherever ivy needs the global `document`, it calls
`getDocument()` instead. Each of the platforms (e.g. Browser, Server,
WebWorker) have providers for `DOCUMENT`. In each of those providers
they also call `setDocument()` accordingly.
Fixes#33651
PR Close#33712
It looks like there was a typo when it originally was
written. As it works right now, the `beforeEach` and
`afterEach` cancel each other out. But then
`ensureDocument()` is called anyway in the `withBody()`
function.
With this change there is no need to call `ensureDocument() in the
`withBody() function.
PR Close#33712
Previously the renderers were fixed so that they inserted extra
"adjacent" statements after the last static property of classes.
In order to help the build-optimizer (in Angular CLI) to be able to
tree-shake classes effectively, these statements should also appear
after any helper calls, such as `__decorate()`.
This commit moves the computation of this positioning into the
`NgccReflectionHost` via the `getEndOfClass()` method, which
returns the last statement that is related to the class.
FW-1668
PR Close#33689
While overriding providers in Ivy TestBed (via TestBed.overrideProvider call), the old providers were retained in the list, since the override takes precedence. However, presence of providers in the list might have side-effect: if a provider has the `ngOnDestroy` lifecycle hook, this hook will be registered and invoked later (when component is destroyed). This commit updates TestBed logic to clear provider list by removing the ones which have overrides.
PR Close#33706
Similar to https://github.com/angular/angular/pull/33633, this commit is
needed to fix an outage with the Angular Kythe indexer.
Crash logs:
```
TypeError: Cannot read property 'text' of undefined
at NodeObject.getFullText (typescript/stable/lib/typescript.js:121443:57)
at FactoryGenerator.generate (angular2/rc/packages/compiler-cli/src/ngtsc/shims/src/factory_generator.ts:67:34)
at GeneratedShimsHostWrapper.getSourceFile (angular2/rc/packages/compiler-cli/src/ngtsc/shims/src/host.ts:88:26)
at findSourceFile (typescript/stable/lib/typescript.js:90654:29)
at typescript/stable/lib/typescript.js:90553:85
at getSourceFileFromReferenceWorker (typescript/stable/lib/typescript.js:90520:34)
at processSourceFile (typescript/stable/lib/typescript.js:90553:13)
at processRootFile (typescript/stable/lib/typescript.js:90383:13)
at typescript/stable/lib/typescript.js:89399:60
at Object.forEach (typescript/stable/lib/typescript.js:280:30)
```
PR Close#33660
Prior to this patch all the styling benchmarks only tested for
template map-based style/class bindings. Because of each of the bindings
being only present in the template, there was no possibility of
there being any duplicate map-based styling bindings.
This benchmark introduces benchmarking for map-based style/class bindings
that are evaluated from both template bindings as well as directives.
This benchmark can be executed by calling:
```
bazel build //packages/core/test/render3/perf:duplicate_map_based_style_and_class_bindings_lib.min_debug.es2015.js
node dist/bin/packages/core/test/render3/perf/duplicate_map_based_style_and_class_bindings_lib.min_debug.es2015.js
```
The benchmark is also run via the `profile_all.js` script (found in
`packages/core/test/render3/perf/`)
PR Close#33608
When ngcc is configured to generate reexports for a package using the
`generateDeepReexports` configuration option, it could incorrectly
render the reexports as often as the number of compiled classes in the
declaration file. This would cause compilation errors due to duplicated
declarations.
PR Close#33658
When the Angular compiler is operated through the ngc binary in watch
mode, changing a template in an external file would not cause the
component to be recompiled if Ivy is enabled.
There was a problem with how a cached compiler host was present that was
unaware of the changed resources, therefore failing to trigger a
recompilation of a component whenever its template changes. This commit
fixes the issue by ensuring that information about modified resources is
correctly available to the cached compiler host.
Fixes#32869
PR Close#33551
Prior to this patch all the styling benchmarks only tested for
template-based style/class bindings. Because of each of the bindings
being only present in the template, there was no possibility of
there being any duplicate bindings. This benchmark introduces
style/class bindings being evaluated from both a template and from
various directives.
This benchmark can be executed by calling:
```
bazel build //packages/core/test/render3/perf:duplicate_style_and_class_bindings_lib.min_debug.es2015.js
node dist/bin/packages/core/test/render3/perf/duplicate_style_and_class_bindings_lib.min_debug.es2015.js
```
The benchmark is also run via the `profile_all.js` script (found in
`packages/core/test/render3/perf/`)
PR Close#33600
Prior to this change, namespaced elements such as SVG elements would not
participate correctly in directive matching as their namespace was not
ignored, which was the case with the View Engine compiler. This led to
incorrect behavior at runtime and template type checking.
This commit resolved the issue by ignoring the namespace of elements and
attributes like they were in View Engine.
Fixes#32061
PR Close#33555
This issue was found when debugging a test failure that was using lazy
loaded modules with the router. When doing this, the router calls
`NgModuleFactory.create` for the loaded module. This module gets a new
injector so the overrides provided in TestBed are not applied unless the
Injectable is in the providers list (which is not the case for
{providedIn...} Injectables).
PR Close#33606
When debugging `LView`s it is easy to get lost since all of them have
the same name. This change does three things:
1. It makes `TView` have an explicit type:
- `Host`: for the top level `TView` for bootstrap
- `Component`: for the `TView` which represents components template
- `Embedded`: for the `TView` which represents an embedded template
2. It changes the name of `LView` to `LHostView`, `LComponentView`, and
`LEmbeddedView` depending on the `TView` type.
3. For `LComponentView` and `LEmbeddedView` we also append the name of
of the `context` constructor. The result is that we have `LView`s which
are name as: `LComponentView_MyComponent` and `LEmbeddedView_NgIfContext`.
The above changes will make it easier to understand the structure of the
application when debugging.
NOTE: All of these are behind `ngDevMode` and will get removed in
production application.
PR Close#33449
Prior to this commit, i18n runtime logic used `elementAttributeInternal` function (that uses `setAttribute` function under the hood) for all elements where i18n attributes are present. However the `<ng-container>` elements in a template may also have i18n attributes and calling `setAttribute` fails, since they are represented as comment nodes in DOM. This commit ensures that we call `setAttribute` on nodes with TNodeType.Element type (that support that operation) only.
PR Close#33599
Previously the compiler would ignore everything in the attribute
name after the first dot. For example
<div [attr.someAttr.attrSuffix]="var"></div>
is turned into <div someAttr="varValue"></div>.
This commit ensures that whole attribute name is captured.
Now <div [attr.someAttr.attrSuffix]="var"></div>
is turned into <div someAttr.attrSuffix="varValue"></div>
PR Close#32256
Fixes ng_package and ng_rollup_bundle rollup issue on Windows where .js file was resolved by bazel resolved instead of .mjs file as there is no sandbox.
Fixes https://github.com/angular/angular/issues/32603 by passing globals and external through templated rollup config as Windows CLI argument limit can be easily exceeded. Also fixes this for ng_rollup_bundle.
PR Close#33607
The legacy nodejs rules rollup_bundle is now deprecated and will be removed in the nodejs rules 1.0 release due in mid-November. This PR brings in the rules_nodejs internal API deps that ng_rollup_bundle, ng_package and ls_rollup_bundle depend on into this repo to break the dependency. In the future these rules should switch to use the new rollup_bundle via a macro as done in https://github.com/angular/angular/pull/33329 but this is not possible right now due to the complication of having esm5 re-rooted ts_library dependencies.
The es6 sources now have .mjs extensions so they no longer need to be re-rooted to `{package}.es6`. This eliminates the need for the collect_es6_sources() function.
Note: repo has been updated to the newest working version of rollup which is 1.25.2. There is some regression in 1.26.0 which causes the following bundling failure:
```
ERROR: /Users/greg/google/angular/packages/localize/BUILD.bazel:20:1: Optimizing JavaScript packages/localize/localize.umd.min.js [terser] failed (Exit 1) terser.sh failed: error executing command bazel-out/host/bin/external/npm/terser/bin/terser.sh bazel-out/darwin-fastbuild/bin/packages/localize/localize.umd.js --output bazel-out/darwin-fastbuild/bin/packages/localize/localize.umd.min.js ... (remaining 5 argument(s) skipped)
Use --sandbox_debug to see verbose messages from the sandbox
Parse error at packages/localize/localize.umd.js:491,4
export * from './src/constants';
^
ERROR: Export statement may only appear at top level
at js_error (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/parse.js:357:11)
at Dn.visit (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/scope.js:347:13)
at Dn._visit (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:1207:24)
at AST_Export._walk (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:718:17)
at walk_body (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:168:17)
at AST_Function.call (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:430:13)
at descend (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:1208:21)
at Dn.visit (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/scope.js:256:13)
at Dn._visit (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:1207:24)
at AST_Function._walk (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:424:24)
[Function]
Target //packages/localize:npm_package failed to build
Use --verbose_failures to see the command lines of failed build steps.
ERROR: /Users/greg/google/angular/packages/localize/BUILD.bazel:20:1 Optimizing JavaScript packages/localize/localize.umd.min.js [terser] failed (Exit 1) terser.sh failed: error executing command bazel-out/host/bin/external/npm/terser/bin/terser.sh bazel-out/darwin-fastbuild/bin/packages/localize/localize.umd.js --output bazel-out/darwin-fastbuild/bin/packages/localize/localize.umd.min.js ... (remaining 5 argument(s) skipped)
```
Will leave that for another day.
Terser also updated to 4.3.3. Updating to 4.3.4 (https://github.com/terser/terser/blob/master/CHANGELOG.md) turns comments preservation on by default which increases the size of the //packages/core/test/bundling/todo:bundle.min.js in CI. After bazelbuild/rules_nodejs#1317 terser can be updated to the latest as passing —comments /a^/ to args can turn off all comments for the //packages/core/test/bundling/todo:bundle.min.js size test.
PR Close#33201
PR Close#33607
When template type checking is configured with `strictDomEventTypes` or
`strictOutputEventTypes` disabled, in compilation units that have
`noImplicitAny` enabled but `strictNullChecks` disabled, a template type
checking error could be produced for certain event handlers.
The error is avoided by letting an event handler in the generated TCB
always have an explicit `any` return type.
Fixes#33528
PR Close#33550
We already have special cases for the `__spread` helper function and with this change we handle the new tslib helper introduced in version 1.10 `__spreadArrays`.
For more context see: https://github.com/microsoft/tslib/releases/tag/1.10.0Fixes: #33614
PR Close#33617
This patch gets rid of the configuration settings present in the
`TStylingContext` array that is used within the styling algorithm
for `[style]`, `[style.prop]`, `[class]` and `[class.name]` bindings.
These configurations now all live inside of the `TNodeFlags`.
PR Close#33540
Keen Yee Liau
Misko Hevery
Pete Bacon Darwin
JiaLiPassion
Alan Agius
Greg Magolan
cexbrayat
Igor Minar
Alex Rickabaugh
Kristiyan Kostadinov
Adam
Andrew Scott
Ayaz Hafiz
ayazhafiz
George Kalpakas
Andrew Kushnir
ivanwonder
Joey Perrott
Matias Niemelä
JoostK
ajitsinghkaler
Paul Gschwendtner
Martin Probst
Mike Casebolt
Filipe Silva
Andrius
Doug Parker
Judy Bogart
Pawel Kozlowski
Hayouung
atscott
Alex Eagle
7006
Troels Lenda
skrikl
Keen Yee Liau
Michael Nahkies
Kara Erickson
Jithil P Ponnan
zuckjet
arturovt
Feliks Khantsis
Danny Skoog
Christopher Dahm
Denis Omelkov
Zaid Al-Omari
horn
Lars Gyrup Brink Nielsen
mohax
Michael Maier
Matthew Harris
NothingEverHappens
Sergey Nikitin
Muhammad Umair