If the $routerOnActivate hook returns a promise, the navigation
is commited, once the promise gets fullfilled but the view
is updated immediately.
This commit delays the view update so that both (view and url) are
updated at the same time.
Closes#7777
Until Angular 1.5.1 is released, the `$routeConfig` and `$routerCanActivate`
annotations for components must live on the controller constructor.
In Angular 1.5.1, it will automatically copy these annotations across from
the component definition file.
Closes#7319
These tests were registering new components after the application had
been bootstrapped, which is not a valid use case for synchronous routes
in Angular 1.
In particular it was registering the "root" component, which caused the
`$rootRouter` to blow up, when it was instantiated, pointing to a root
component that did not yet exist.
@petebacondarwin deserves credit for most of this commit.
This allows you to specify a regex and serializer function instead
of the path DSL in your route declaration.
```
@RouteConfig([
{ regex: '[a-z]+.[0-9]+',
serializer: (params) => `{params.a}.params.b}`,
component: MyComponent }
])
class Component {}
```
Closes#7325Closes#7126
The current router is passed to the current component via a binding.
To indicate that this is an angular provided object, this commit
renames the binding to `$router`.
BREAKING CHANGE:
The recently added binding of the current router to the current component
has been renamed from `router` to `$router`.
So now the recommended set up for your bindings in your routed component
is:
```js
{
...
bindings: {
$router: '<'
}
}
```
The current router is passed to the current component via a binding.
To indicate that this is an angular provided object, this commit
renames the binding to `$router`.
BREAKING CHANGE:
The recently added binding of the current router to the current component
has been renamed from `router` to `$router`.
So now the recommended set up for your bindings in your routed component
is:
```js
{
...
bindings: {
$router: '<'
}
}
```
The singleton service that represents the top level router was called
`$router` but this is confusing since there are actually lots of routers,
which depend upon where you are in the DOM. This is similar to the situation
with scopes.
This commit clarifies this singleton by renaming it to `$rootRouter`.
BREAKING CHANGE:
The `$router` injectable service has been renamed to `$rootRouter`
The current router is passed to the current component via a binding.
To indicate that this is an angular provided object, this commit
renames the binding to `$router`.
BREAKING CHANGE:
The recently added binding of the current router to the current component
has been renamed from `router` to `$router`.
So now the recommended set up for your bindings in your routed component
is:
```js
{
...
bindings: {
$router: '<'
}
}
```
In Angular 1.5 there is a new helper method for creating component directives.
See https://docs.angularjs.org/guide/component for more information about components.
These kind of directives only match the `E` element form and the previously component
router only created HTML that matched directives that matched the `A` attribute form.
This commit changes the `<ng-outlet>` directive so that it generates custom HTML
elements rather divs with custom attributes to trigger the relevant component to
appear in the DOM.
Going forward, Angular 1.5 users are encouraged to create their router components
using the following style:
```
myModule.componnet('component-name', {
// component definition object
});
```
Closes angular/angular.js#13860
Closes#6076Closes#5278
BREAKING CHANGE:
The component router now creates custom element HTML rather than custom attribute
HTML, in order to create a new component. So rather than
```html
<div custom-component></div>
```
it now creates
```html
<custom-component></custom-component>
```
If you defined you router components using the `directive()` helper and
specified the `restrict` properties such that element matching was not allowed,
e.g. `restrict: 'A'` then these components will no longer be instantiated
by the component router and the outlet will be empty.
The fix is to include `E` in the `restrict` property.
`restrict: 'EA'`
Note that this does not affect directives that did not specify the `restrict`
property as the default for this property is already `EA`.
BREAKING CHANGE:
Previously, components that would implement lifecycle interfaces would include methods
like "onChanges" or "afterViewInit." Given that components were at risk of using such
names without realizing that Angular would call the methods at different points of
the component lifecycle. This change adds an "ng" prefix to all lifecycle hook methods,
far reducing the risk of an accidental name collision.
To fix, just rename these methods:
* onInit
* onDestroy
* doCheck
* onChanges
* afterContentInit
* afterContentChecked
* afterViewInit
* afterViewChecked
* _Router Hooks_
* onActivate
* onReuse
* onDeactivate
* canReuse
* canDeactivate
To:
* ngOnInit,
* ngOnDestroy,
* ngDoCheck,
* ngOnChanges,
* ngAfterContentInit,
* ngAfterContentChecked,
* ngAfterViewInit,
* ngAfterViewChecked
* _Router Hooks_
* routerOnActivate
* routerOnReuse
* routerOnDeactivate
* routerCanReuse
* routerCanDeactivate
The names of lifecycle interfaces and enums have not changed, though interfaces
have been updated to reflect the new method names.
Closes#5036
This is a big change. @matsko also deserves much of the credit for the implementation.
Previously, `ComponentInstruction`s held all the state for async components.
Now, we introduce several subclasses for `Instruction` to describe each type of navigation.
BREAKING CHANGE:
Redirects now use the Link DSL syntax. Before:
```
@RouteConfig([
{ path: '/foo', redirectTo: '/bar' },
{ path: '/bar', component: BarCmp }
])
```
After:
```
@RouteConfig([
{ path: '/foo', redirectTo: ['Bar'] },
{ path: '/bar', component: BarCmp, name: 'Bar' }
])
```
BREAKING CHANGE:
This also introduces `useAsDefault` in the RouteConfig, which makes cases like lazy-loading
and encapsulating large routes with sub-routes easier.
Previously, you could use `redirectTo` like this to expand a URL like `/tab` to `/tab/posts`:
@RouteConfig([
{ path: '/tab', redirectTo: '/tab/users' }
{ path: '/tab', component: TabsCmp, name: 'Tab' }
])
AppCmp { ... }
Now the recommended way to handle this is case is to use `useAsDefault` like so:
```
@RouteConfig([
{ path: '/tab', component: TabsCmp, name: 'Tab' }
])
AppCmp { ... }
@RouteConfig([
{ path: '/posts', component: PostsCmp, useAsDefault: true, name: 'Posts' },
{ path: '/users', component: UsersCmp, name: 'Users' }
])
TabsCmp { ... }
```
In the above example, you can write just `['/Tab']` and the route `Users` is automatically selected as a child route.
Closes#4728Closes#4228Closes#4170Closes#4490Closes#4694Closes#5200Closes#5475
This reverts commit cf7292fcb1.
This commit triggered an existing race condition in Google code. More work is needed on the Router to fix this condition before this refactor can land.
This is a big change. @matsko also deserves much of the credit for the implementation.
Previously, `ComponentInstruction`s held all the state for async components.
Now, we introduce several subclasses for `Instruction` to describe each type of navigation.
BREAKING CHANGE:
Redirects now use the Link DSL syntax. Before:
```
@RouteConfig([
{ path: '/foo', redirectTo: '/bar' },
{ path: '/bar', component: BarCmp }
])
```
After:
```
@RouteConfig([
{ path: '/foo', redirectTo: ['Bar'] },
{ path: '/bar', component: BarCmp, name: 'Bar' }
])
```
BREAKING CHANGE:
This also introduces `useAsDefault` in the RouteConfig, which makes cases like lazy-loading
and encapsulating large routes with sub-routes easier.
Previously, you could use `redirectTo` like this to expand a URL like `/tab` to `/tab/posts`:
@RouteConfig([
{ path: '/tab', redirectTo: '/tab/users' }
{ path: '/tab', component: TabsCmp, name: 'Tab' }
])
AppCmp { ... }
Now the recommended way to handle this is case is to use `useAsDefault` like so:
```
@RouteConfig([
{ path: '/tab', component: TabsCmp, name: 'Tab' }
])
AppCmp { ... }
@RouteConfig([
{ path: '/posts', component: PostsCmp, useAsDefault: true, name: 'Posts' },
{ path: '/users', component: UsersCmp, name: 'Users' }
])
TabsCmp { ... }
```
In the above example, you can write just `['/Tab']` and the route `Users` is automatically selected as a child route.
Closes#4170Closes#4490Closes#4694Closes#5200Closes#5352
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
Chuck Jazdzewski
Victor Berchet
Vamsi Varikuti
Fabian Raetz
Peter Bacon Darwin
Brandon Roberts
Brian Ford
Alexander Bachmann
Jeff Cross
Alex Rickabaugh