- `directiveInjector()` is used to inject anything in the directive / component
/ pipe factories so adding `InjectionToken<T>` as a supported token type.
- `getOrCreateInjectable()` should search first in the node injector tree and
then in the module injector tree (was either or before the PR).
PR Close#25166
When ngtsc encounters a reference to a type (for example, a Component
type listed in an NgModule declarations array), it traces the import
of that type and attempts to determine the best way to refer to it.
In the event the type is defined in the same file where a reference
is being generated, the identifier of the type is used. If the type
was imported, ngtsc has a choice. It can use the identifier from the
original import, or it can write a new import to the module where the
type came from.
ngtsc has a bug currently when it elects to rely on the user's import.
When writing a .d.ts file, the user's import may have been elided as
the type was not referred to from the type side of the program. Thus,
in .d.ts files ngtsc must always assume the import may not exist, and
generate a new one.
In .js output the import is guaranteed to still exist, so it's
preferable for ngtsc to continue using the existing import if one is
available.
This commit changes how @angular/compiler writes type definitions, and
allows it to use a different expression to write a type definition than
is used to write the value. This allows ngtsc to specify that types in
type definitions should always be imported. A corresponding change to
the staticallyResolve() Reference system allows the choice of which
type of import to use when generating an Expression from a Reference.
PR Close#25080
Ivy definition types have a generic type which specifies the return
type of the factory function. For example:
static ngDirectiveDef<NgForOf, '[ngFor][ngForOf]'>
However, in this case NgForOf itself has a type parameter <T>. Thus,
writing the above is incorrect.
This commit modifies ngtsc to understand the genericness of NgForOf and
to write the following:
static ngDirectiveDef<NgForOf<any>, '[ngFor][ngForOf]'>
PR Close#24862
Previously ngtsc would use a tuple of class types for listing metadata
in .d.ts files. For example, an @NgModule's declarations might be
represented with the type:
[NgIf, NgForOf, NgClass]
If the module had no declarations, an empty tuple [] would be produced.
This has two problems.
1. If the class type has generic type parameters, TypeScript will
complain that they're not provided.
2. The empty tuple type is not actually legal.
This commit addresses both problems.
1. Class types are now represented using the `typeof` operator, so the
above declarations would be represented as:
[typeof NgIf, typeof NgForOf, typeof NgClass].
Since typeof operates on a value, it doesn't require generic type
arguments.
2. Instead of an empty tuple, `never` is used to indicate no metadata.
PR Close#24862
Previously, some of the *Def symbols were not exported or were exported
as public API. This commit ensures every definition type is in the
private export namespace.
PR Close#24862
Previously ngtsc had a few bugs handling special token types:
* Injector was not properly translated to INJECTOR
* ChangeDetectorRef was not injected via injectChangeDetectorRef()
This commit fixes these two bugs, and also adds a test to ensure
they continue to work correctly.
PR Close#24862
for non-inline templates
- Non-inline templates used to ouput the path to the component TS file
instead of the path to the original HTML file.
- Inline templates keep the same behavior.
Fixes#24884
PR Close#24885
Previously the Ivy template compiler would throw on encountering
an animation binding (e.g. [@anim]). This is unneccessary and
precludes testing existing code. This commit changes the error to a
warning.
PR Close#24738
When writing selectors as string literal types in .d.ts files,
strip newlines to avoid generating invalid code. Newlines carry
no meaning in selectors anyway.
PR Close#24738
On accident a few of the definition types were emitted as public API
symbols. Much of the Ivy API surface is still prefixed with ɵ,
indicating it's a private API. The definition types should be private
for now.
PR Close#24738
InjectorDef is parameterized on the type of the injector
configuration class (e.g. the @NgModule decorated type). Previously
this parameter was not included when generating .d.ts files that
contained InjectorDefs.
PR Close#24738
This updates the r3_pipe_compiler to not depend on global analysis,
and to produce ngPipeDef instructions in the same way that the other
compilers do. It's a precursor to JIT and AOT implementations of
@Pipe compilation.
PR Close#24703
- Adds InheritanceDefinitionFeature to ivy
- Ensures that lifecycle hooks are inherited from super classes whether they are defined as directives or not
- Directives cannot inherit from Components
- Components can inherit from Directives or Components
- Ensures that Inputs, Outputs, and Host Bindings are inherited
- Ensures that super class Features are run
PR Close#24570
This change makes @angular/compiler more tree-shakeable by changing
an enum to a const enum and by getting rid of a top-level map that
the tree-shaker was seeing as a reference which caused r3_identifiers
to be retained.
This drops a few hundred bytes of JS from tree-shaken ngtsc compiled
apps.
PR Close#24677
This change generates ngInjectorDef as well as ngModuleDef for @NgModule
annotated types, reflecting the dual nature of @NgModules as both compilation
scopes and as DI configuration containers.
This required implementing ngInjectorDef compilation in @angular/compiler as
well as allowing for multiple generated definitions for a single decorator in
the core of ngtsc.
PR Close#24632
All errors for existing fields have been detected and suppressed with a
`!` assertion.
Issue/24571 is tracking proper clean up of those instances.
One-line change required in ivy/compilation.ts, because it appears that
the new syntax causes tsickle emitted node to no longer track their
original sourceFiles.
PR Close#24572
inject() was changed in da31db7 to not take a default value parameter,
so injectable_compiler_2 should not request the use of one when
using inject().
PR Close#24565
ngtsc needs to reflect over code to property compile it. It performs operations
such as enumerating decorators on a type, reading metadata from constructor
parameters, etc.
Depending on the format (ES5, ES6, etc) of the underlying code, the AST
structures over which this reflection takes place can be very different. For
example, in TS/ES6 code `class` declarations are `ts.ClassDeclaration` nodes,
but in ES5 code they've been downleveled to `ts.VariableDeclaration` nodes that
are initialized to IIFEs that build up the classes being defined.
The ReflectionHost abstraction allows ngtsc to perform these operations without
directly querying the AST. Different implementations of ReflectionHost allow
support for different code formats.
PR Close#24541
This change supports compilation of components, directives, and modules
within ngtsc. Support is not complete, but is enough to compile and test
//packages/core/test/bundling/todo in full AOT mode. Code size benefits
are not yet achieved as //packages/core itself does not get compiled, and
some decorators (e.g. @Input) are not stripped, leading to unwanted code
being retained by the tree-shaker. This will be improved in future commits.
PR Close#24427
At runtime in JIT mode, when the compiler writes a reference to a symbol that symbol
is resolved through a symbol table named angularCoreEnv in render3/jit/environment.
Previously, this symbol table was not kept up-to-date with the Ivy instruction set
and the names of symbols the compiler could reference.
This change brings the symbol table in sync, and also adds a test that verifies every
symbol the compiler can reference is available at runtime in the symbol table.
PR Close#24479
This commit builds out enough of the JIT compiler to render
//packages/core/test/bundling/todo, and allows the tests to run in
JIT mode.
To play with the app, run:
bazel run --define=compile=jit //packages/core/test/bundling/todo:prodserver
PR Close#24138
Bazel has a restriction that a single output (eg. a compiled version of
//packages/common) can only be produced by a single rule. This precludes
the Angular repo from having multiple rules that build the same code. And
the complexity of having a single rule produce multiple outputs (eg. an
ngc-compiled version of //packages/common and an Ivy-enabled version) is
too high.
Additionally, the Angular repo has lots of existing tests which could be
executed as-is under Ivy. Such testing is very valuable, and it would be
nice to share not only the code, but the dependency graph / build config
as well.
Thus, this change introduces a --define flag 'compile' with three potential
values. When --define=compile=X is set, the entire build system runs in a
particular mode - the behavior of all existing targets is controlled by
the flag. This allows us to reuse our entire build structure for testing
in a variety of different manners. The flag has three possible settings:
* legacy (the default): the traditional View Engine (ngc) build
* local: runs the prototype ngtsc compiler, which does not rely on global
analysis
* jit: runs ngtsc in a mode which executes tsickle, but excludes the
Angular related transforms, which approximates the behavior of plain
tsc. This allows the main packages such as common to be tested with
the JIT compiler.
Additionally, the ivy_ng_module() rule still exists and runs ngc in a mode
where Ivy-compiled output is produced from global analysis information, as
a stopgap while ngtsc is being developed.
PR Close#24056
Short-circuitable expressions (using ternary & binary operators) could not use
the regular binding mechanism as it relies on the bindings being checked every
single time - the index is incremented as part of checking the bindings.
Then for pure function kind of bindings we use a different mechanism with a
fixed index. As such short circuiting a binding check does not mess with the
expected binding index.
Note that all pure function bindings are handled the same wether or not they
actually are short-circuitable. This allows to keep the compiler and compiled
code simple - and there is no runtime perf cost anyway.
PR Close#24039
This commit adds a mechanism by which the @angular/core annotations
for @Component, @Injectable, and @NgModule become decorators which,
when executed at runtime, trigger just-in-time compilation of their
associated types. The activation of these decorators is configured
by the ivy_switch mechanism, ensuring that the Ivy JIT engine does
not get included in Angular bundles unless specifically requested.
PR Close#23833
Previously, the compileComponent() and compileDirective() APIs still required
the output of global analysis, even though they only read local information
from that output.
With this refactor, compileComponent() and compileDirective() now define
their inputs explicitly, with the new interfaces R3ComponentMetadata and
R3DirectiveMetadata. compileComponentGlobal() and compileDirectiveGlobal()
are introduced and convert from global analysis output into the new metadata
format.
This refactor also splits out the view compiler into separate files as
r3_view_compiler_local.ts was getting unwieldy.
Finally, this refactor also splits out generation of DI factory functions
into a separate r3_factory utility as the logic is utilized between different
compilers.
PR Close#23545
This commit adds a new compiler pipeline that isn't dependent on global
analysis, referred to as 'ngtsc'. This new compiler is accessed by
running ngc with "enableIvy" set to "ngtsc". It reuses the same initialization
logic but creates a new implementation of Program which does not perform the
global-level analysis that AngularCompilerProgram does. It will be the
foundation for the production Ivy compiler.
PR Close#23455
A long time ago Angular used to support both those attribute notations:
- `*attr='binding'`
- `template=`attr: binding`
Because the last notation has been dropped we can refactor the binding parsing.
Source maps will benefit from that as no `attr:` prefix is added artificialy any
more.
PR Close#23460
In certain cases seen in production, simplify() can returned
undefined when simplifying decorator metadata. This has proven tricky
to reproduce in an isolated test, but the fix is simple and low-risk:
don't attempt to spread an undefined set of annotations in the first
place.
PR Close#23349
- Remove default injection value from `inject` / `directiveInject` since
it is not possible to set using annotations.
- Module `Injector` is stored on `LView` instead of `LInjector` data
structure because it can change only at `LView` level. (More efficient)
- Add `ngInjectableDef` to `IterableDiffers` so that existing tests can
pass as well as enable `IterableDiffers` to be injectable without
`Injector`
PR Close#23345
This change changes:
- compiler uses `directiveInject` instead of `inject` for `Directive`s
- unifies the flags in `di` as well as `render3`
- changes the signature of `directiveInject` to match `inject` In prep for #23330
- compiler now generates flags for injection.
Compiler portion of #23342
Prep for #23330
PR Close#23345
The 'stringify' function prints an object as [Object object] which
is not very helpful in many cases, especially in a diagnostics
message. This commit changes the behavior to pretty print an object.
PR Close#22689
When compiling templates the compiler would often bind to
closest context rather than the component context.
The only time one should be binding to the cont component is
in explicit cases where the inner template declares local variable.
PR Close#23168
Given
```
<div *ngFor=”…” (click)=“doSomething()”>
```
Before `doSomething` would execute on the inner template context, which
is incorrect. The correct behavior is to execute on the top level context
of the component.
PR Close#23168
Computing the value of loadChildren does not work externally, as the CLI
needs to be able to detect the paths referenced to properly set up
codesplitting. However, internally, different approaches to codesplitting
require hashed module IDs, and the computation of those hashes involves
something like:
{path: '...', loadChildren: hashFn('module')}
ngc should lower loadChildren into an exported constant in that case.
This will never break externally, because loadChildren is always a
string externally, and a string won't get lowered.
PR Close#23088
Remove `containerRefreshStart` and `containerRefreshEnd` instruction
from the output.
Generate directives as a list in `componentDef` rather than inline into
instructions. This is consistent in making selector resolution runtime
so that translation of templates can follow locality.
PR Close#22921
In Ivy mode we rewrite references to Injector to INJECTOR in ngInjectableDef, to fix tree-shaking.
This changes the rewrite to happen always, even in non-Ivy mode, and makes Angular understand
INJECTOR across the board at runtime.
PR Close#23008
This adds compilation of @NgModule providers and imports into
ngInjectorDef statements in generated code. All @NgModule annotations
will be compiled and the @NgModule decorators removed from the
resultant js output.
All @Injectables will also be compiled in Ivy mode, and the decorator
removed.
PR Close#22458
BREAKING CHANGE:
The `<template>` tag was deprecated in Angular v4 to avoid collisions (i.e. when
using Web Components).
This commit removes support for `<template>`. `<ng-template>` should be used
instead.
BEFORE:
<!-- html template -->
<template>some template content</template>
# tsconfig.json
{
# ...
"angularCompilerOptions": {
# ...
# This option is no more supported and will have no effect
"enableLegacyTemplate": [true|false]
}
}
AFTER:
<!-- html template -->
<ng-template>some template content</ng-template>
PR Close#22783
Rename:
- `elementClass` (short: `k`) => `elementClassNamed` (short: `kn`)
- `elementStyle` (short: `s`) => `elementStyleNamed` (short: `sn`)
Currently `[class.name]` is `elementClass(0, ‘name’, value)`. We would
like to introduce new binding `[class]` which needs a new instruction
ideally `elementClass(0, value)`. Doing the rename creates space
to create such an instruction in subsequent change.
PR Close#22719
Rename @Injectable({scope -> providedIn}).
Instead of {providedIn: APP_ROOT_SCOPE}, accept {providedIn: 'root'}.
Also, {providedIn: null} implies the injectable should not be added
to any scope.
PR Close#22655
Produces back-patch as described in the #22235 and referenced in #22480.
This just contains the compiler implementations and the corresponding unit
tests. Connecting the dots as described in #22480 will be in a follow on
change.
PR Close#22506
Previously the injectable compiler assumed all tree-shakeable injectables
would have dependencies that were injectables or InjectionTokens. However
old code still uses string tokens (e.g. NgUpgrade and '$injector'). Using
such tokens would cause the injectable compiler to crash.
Now, the injectable compiler can properly generate a dependency on such a
string token.
PR Close#22376
InjectionToken can be created with an ngInjectableDef, and previously
this allowed the full expressiveness of @Injectable. However, this
requires a runtime reflection system in order to generate factories
from expressed provider declarations.
Instead, this change requires scoped InjectionTokens to provide the
factory directly (likely using inject() for the arguments), bypassing
the need for a reflection system.
Fixes#22205
PR Close#22207
This commit bundles 3 important changes, with the goal of enabling tree-shaking
of services which are never injected. Ordinarily, this tree-shaking is prevented
by the existence of a hard dependency on the service by the module in which it
is declared.
Firstly, @Injectable() is modified to accept a 'scope' parameter, which points
to an @NgModule(). This reverses the dependency edge, permitting the module to
not depend on the service which it "provides".
Secondly, the runtime is modified to understand the new relationship created
above. When a module receives a request to inject a token, and cannot find that
token in its list of providers, it will then look at the token for a special
ngInjectableDef field which indicates which module the token is scoped to. If
that module happens to be in the injector, it will behave as if the token
itself was in the injector to begin with.
Thirdly, the compiler is modified to read the @Injectable() metadata and to
generate the special ngInjectableDef field as part of TS compilation, using the
PartialModules system.
Additionally, this commit adds several unit and integration tests of various
flavors to test this change.
PR Close#22005
All of the providers in a module get compiled into a module definition in the
factory file. Some of these providers are for the actual module types, as those
are available for injection in Angular. For tree-shakeable tokens, the runtime
needs to be able to distinguish which modules are present in an injector.
This change adds a NodeFlag which tags those module providers for later
identification.
PR Close#22005
Currently, `shimCssText` only keep `/*# sourceMappingUrl ... */` comments and strip `/*# sourceURL ... */` comments. So, Chrome can't find the source maps for component style(that's created in new `style` tags)
PR Close#16088
The "enableIvy" compiler option is the initial implementation
of the Render3 (or Ivy) code generation. This commit enables
generation generating "Hello, World" (example in the test)
but not much else. It is currenly only useful for internal Ivy
testing as Ivy is in development.
PR Close#21427
Cache reference resolution for external references as finding
the declaration of a symbol is expensive and does not change
for a program once created.
This resolves a signficant performance regression in the langauge
service.
PR Close#21359
- Add tests target for `test`, `test_node_only` and `test_web` in `core` package.
- Created a `_testing_init` pseudo package where bootstrap code for tests is kept.
- Moved `source_map_util` from `test` to `testing` so to prevent circular dependency.
- Removed `visibility:public` for testing `BUILD` packages.
PR Close#21053
Allows a directive to use the expression passed directly to a property
as a guard instead of filtering the type through a type expression.
This more accurately matches the intent of the ngIf usage of its template
enabling better type inference.
Moved NgIf to using this type of guard instead of a function guard.
Closes: #20967
Due to an overly agressive assert the compiler would generate
an internal error when referencing an enum declared in
namspace.
Fixes#18170
PR Close#20947
`$any()` can now be used in a binding expression to disable type
checking for the rest of the expression. This similar to `as any` in
TypeScript and allows expression that work at runtime but do not
type-check.
PR Close#20876
Structural directives can now specify a type guard that describes
what types can be inferred for an input expression inside the
directive's template.
NgIf was modified to declare an input guard on ngIf.
After this change, `fullTemplateTypeCheck` will infer that
usage of `ngIf` expression inside it's template is truthy.
For example, if a component has a property `person?: Person`
and a template of `<div *ngIf="person"> {{person.name}} </div>`
the compiler will no longer report that `person` might be null or
undefined.
The template compiler will generate code similar to,
```
if (NgIf.ngIfTypeGuard(instance.person)) {
instance.person.name
}
```
to validate the template's use of the interpolation expression.
Calling the type guard in this fashion allows TypeScript to infer
that `person` is non-null.
Fixes: #19756?
PR Close#20702
Add enough BUILD files to make it possible to
`bazel build packages/core/test`
Also re-format BUILD.bazel files with Buildifier.
Add a CI lint check that they stay formatted.
PR Close#20768
The errors produced when error were encountered while interpreting the
content of a directive was often incomprehencible. With this change
these kind of error messages should be easier to understand and diagnose.
PR Close#20459
The type-check block generated with `"fullTemplateTypeCheck"` was
invalid if the it contained a template ref as would be generated
using the `else` micro-syntax of `NgIf`.
Fixes: #19485
PR Close#20463
`cmp:host {}` and `cmp:host some-other-selector {}` were not handled
consistently.
Note those should not match anything but are made equivalent to respectively
`:host(cmp)` and `:host(cmp) some-other-selector` to avoid breaking legacy apps.
* don't reexport symbols that the user already reexported
* never reexport symbols that are part of arguments of non simple function calls
Fixes#19883
PR Close#19884
This also changes the compiler so that we throw less often
on structural changes and produce a meaningful state
in the `ng.Program` in case of errors.
Related to #19951
PR Close#19953
Previously, `listLazyRoute` would store invalid information in a compiler
internal cache, which lead to incorrect paths that were used during emit.
This commit fixes this.
PR Close#19953
The error collector changes behavior of the metadata resolver
in ways that haven't been fully hardened. This changes limits
its use to the lazy route detection and the language service.
Issue: #19906
PR Close#19912
Usages of `NgTools_InternalApi_NG_2` from `@angular/compiler-cli` will now
throw an error.
Adds `listLazyRoutes` to `@angular/compiler-cli/ngtools2.ts` for getting
the lazy routes of a `ng.Program`.
PR Close#19836
References to resources (such as .css files) that are generated into
the `outDir` directory outside of `rootDir` would cause a spurious
compiler error about not being able to find a files that ends in
'.ngstyle.ts'.
Also fixed a minor issue in compiler error reporting
Fixes: #19765, #19767
PR Close#19770
If no user files changed:
- only type check the changed generated files
Never emit non changed generated files
- we still calculate them, but don’t send them through
TypeScript to emit them but cache the written files instead.
PR Close#19646
This is important to not confuse users nor downstream tools that
consume our source maps. For generated content for which we don’t
have an original source file, we use the generated file now.
Fixes#19538
The current `flattenSummaries` function re-process the same NgModule
summary even if it has been processed before. Certain modules like
CommonModule are repeated multiple times in the module tree and it is
expanded out every time.
This was making unit tests using AOT summaries really slow. This will
also slow down JIT bootstrap applications that load AOT summaries for
component libraries.
The fix is to remember which summaries were seen before and not to
process them again.
Each node now has two index: nodeIndex and checkIndex.
nodeIndex is the index in both the view definition and the view data.
checkIndex is the index in in the update function (update directives and update
renderer).
While nodeIndex and checkIndex have the same value for now, having both of them
will allow changing the structure of view definition after compilation (ie for
runtime translations).
For now, we always create all generated files, but diff them
before we pass them to TypeScript.
For the user files, we compare the programs and only emit changed
TypeScript files.
This also adds more diagnostic messages if the `—diagnostics` flag
is passed to the command line.
Added the compiler options `strictInjectionParameters` that defaults
to `false`. If enabled the compiler will report errors for parameters
of an `@Injectable` that cannot be determined instead of generating a
warning.
This is planned to be switched to default to `true` for Angular 6.0.
Also adds auto upgrade from lower version based
on the .d.ts file (e.g. from version 3 to 4).
This is needed as we are now also capturing type aliases
in metadata files (and we rely on this),
see 6e3498ca8e.
introduce the option `allowEmptyCodegenFiles` to generate all generated files,
even if they are empty.
- also provides the original source files from which the file was generated
in the write file callback
- needed e.g. for G3 when copying over pinto mod names from the original component
to all generated files
use `importAs` from flat modules when writing summaries
- i.e. prevents incorrect entries like @angular/common/common in the .ngsummary.json files.
change interaction between ng and ts to prevent race conditions
- before Angular would rely on TS to first read the file for which we generate files,
and then the generated files. However, this can break easily when we reuse an old program.
don’t generate files for sources that are outside of `rootDir`
(see #19337)
With this commit `ngc` is used instead of `tsc-wrapped` for
collecting metadata and tsickle rewriting and `tsc-wrapped`
is removed from the repository.
`@angular/tsc-wrapped@5` is now deprecated and is no longer
used, updated, or maintained as part as of Angular 5.x.x.
`@angular/tsc-wrapped@4` is still maintained and required by
Angular 4.x.x and will be maintained as long as 4.x.x is in
LTS.
PR Close#19298
We now create 2 programs with exactly the same fileNames and
exactly the same `import` / `export` declarations,
allowing TS to reuse the structure of first program
completely. When passing in an oldProgram and the files didn’t change,
TS can also reuse the old program completely.
This is possible buy adding generated files to TS
in `host.geSourceFile` via `ts.SourceFile.referencedFiles`.
This commit also:
- has a minor side effect on how we generate shared stylesheets:
- previously every import in a stylesheet would generate a new
`.ngstyles.ts` file.
- now, we only generate 1 `.ngstyles.ts` file per entry in `@Component.styleUrls`.
This was required as we need to be able to determine the program files
without loading the resources (which can be async).
- makes all angular related methods in `CompilerHost`
optional, allowing to just use a regular `ts.CompilerHost` as `CompilerHost`.
- simplifies the logic around `Compiler.analyzeNgModules` by introducing `NgAnalyzedFile`.
Perf impact: 1.5s improvement in compiling angular io
PR Close#19275
This speeds up the compilation process significantly.
Also introduces a new option `fullTemplateTypeCheck` to do more checks in templates:
- check expressions inside of templatized content (e.g. inside of `<div *ngIf>`).
- check the arguments of calls to the `transform` function of pipes
- check references to directives that were exposed as variables via `exportAs`
PR Close#19152
BREAKING CHANGE: the compiler option `enableLegacyTemplate` is now disabled by default as the `<template>` element has been deprecated since v4. Use `<ng-template>` instead. The option `enableLegacyTemplate` and the `<template>` element will both be removed in Angular v6.
PR Close#18756
With this change ngc now accepts a `-w` or a `--watch`
command-line option that will automatically perform a
recompile whenever any source files change on disk.
PR Close#18818
With this commit the compiler will "lower" expressions into exported
variables for values the compiler does not need to know statically
in order to be able to generate a factory. For example:
```
providers: [{provider: 'token', useValue: calculated()}]
```
produced an error as the expression `calculated()` is not supported
by the compiler because `calculated` is not a
[known function](https://angular.io/guide/metadata#annotationsdecorators)
With this commit this is rewritten, during emit of the .js file, into
something like:
```
export var ɵ0 = calculated();
...
provdiers: [{provider: 'token', useValue: ɵ0}]
```
The compiler then will now generate a reference to the exported `ɵ0`
instead of failing to evaluate `calculated()`.
PR Close#18905
With this change ngc now accepts a `-w` or a `--watch`
command-line option that will automatically perform a
recompile whenever any source files change on disk.
PR Close#18818
With this commit the compiler will "lower" expressions into exported
variables for values the compiler does not need to know statically
in order to be able to generate a factory. For example:
```
providers: [{provider: 'token', useValue: calculated()}]
```
produced an error as the expression `calculated()` is not supported
by the compiler because `calculated` is not a
[known function](https://angular.io/guide/metadata#annotationsdecorators)
With this commit this is rewritten, during emit of the .js file, into
something like:
```
export var ɵ0 = calculated();
...
provdiers: [{provider: 'token', useValue: ɵ0}]
```
The compiler then will now generate a reference to the exported `ɵ0`
instead of failing to evaluate `calculated()`.
PR Close#18905
This is needed as the typescript no longer elides type reexports
in the generated code when using transformers.
A nice side effect is that this make summaries shorter and produces
less reexports as we rollup reexports.
PR Close#18788
Previously, we only did this when setting the `generateCodeForLibraries: false`.
This is needed so that libraries compiled with `generateCodeForLibraries: true` can be used as dependencies of other compilation units.
PR Close#18788
After this, neither @angular/compiler nor @angular/comnpiler-cli depend
on @angular/core.
This add a duplication of some interfaces and enums which is stored
in @angular/compiler/src/core.ts
BREAKING CHANGE:
- `@angular/platform-server` now additionally depends on
`@angular/platform-browser-dynamic` as a peer dependency.
PR Close#18683
This change allows users to specify multiple exportAs names for a
directive by giving a comma-delimited list inside the string.
The primary motivation for this change is to allow these names to be
changed in a backwards compatible way.
This also allows to customize the filePaths in `.ngsummary.json` file
via the new methods `toSummaryFileName` and `fromSummaryFileName`
on the `CompilerHost`.
This change allows ReflectiveInjector to be tree shaken resulting
in not needed Reflect polyfil and smaller bundles.
Code savings for HelloWorld using Closure:
Reflective: bundle.js: 105,864(34,190 gzip)
Static: bundle.js: 154,889(33,555 gzip)
645( 2%)
BREAKING CHANGE:
`platformXXXX()` no longer accepts providers which depend on reflection.
Specifically the method signature when from `Provider[]` to
`StaticProvider[]`.
Example:
Before:
```
[
MyClass,
{provide: ClassA, useClass: SubClassA}
]
```
After:
```
[
{provide: MyClass, deps: [Dep1,...]},
{provide: ClassA, useClass: SubClassA, deps: [Dep1,...]}
]
```
NOTE: This only applies to platform creation and providers for the JIT
compiler. It does not apply to `@Compotent` or `@NgModule` provides
declarations.
Benchpress note: Previously Benchpress also supported reflective
provides, which now require static providers.
DEPRECATION:
- `ReflectiveInjector` is now deprecated as it will be remove. Use
`Injector.create` as a replacement.
closes#18496
The static reflectory check for macro function recursion was too
agressive and disallowed calling a function with argument that also
calls the same function. For example, it disallowed nested animation
groups.
Fixes: #17467
In previous version of tsickle abstract class methods were materialized.
The change resulted in 6Kb savings in angular.io bundle.
This change also required the removal of `@private` and `@return` type
annotation as it is explicitly dissalowed by tsickle.
NOTE: removed casts in front of `makeDecorator` due to:
https://github.com/angular/devkit/issues/45
```
14938 Jul 19 13:16 0.b19e913fbdd6507d346b.chunk.js
1535 Jul 19 13:16 inline.d8e019ea3cfdd86c2bd0.bundle.js
589178 Jul 19 13:16 main.54c97bcb6f254776b678.bundle.js
34333 Jul 19 13:16 polyfills.4a3c9ca9481d53803157.bundle.js
14938 Jul 18 16:55 0.b19e913fbdd6507d346b.chunk.js
1535 Jul 18 16:55 inline.0c83abb44fad9a2768a7.bundle.js
582786 Jul 18 16:55 main.ea290db71b051813e156.bundle.js
34333 Jul 18 16:55 polyfills.4a3c9ca9481d53803157.bundle.js
main savings: 589178 - 582786 = 6,392
```
PR Close#18236
- /deep/ is deprecated and being removed from Chrome
- >>> is semantically invalid in a stylesheet
- sass will no longer support either in any version of sass
-> use ::ng-deep in emulated shadow DOM mode
Because the deep combinator is deprecated in the CSS spec,
`/deep/`, `>>>` and `::ng-deep` are also deprecated in emulated shadow DOM mode
and will be removed in the future.
see https://www.chromestatus.com/features/6750456638341120
Refactoring the compiler to use transformers moves the code generation
after type-checking which suppresses the errors TypeScript would
generate in the user code.
`TypeChecker` currently produces the same factory code that was
generated prior the switch to transfomers, getting back the same
diagnostics as before. The refactoring will allow the code to
diverge from the factory code and allow better diagnostic error
messages than was previously possible by type-checking the factories.
These files are needed so that:
- user code can compile even without real codegen
- as tsc transformers cannot create but only change existing files
in the transformation pipeline.
Add source location as a note tag as `<note category="location">path/to/file.ts:start_line[,end_line]</note>`.
`[,end_line]` part is optional and specified only if the end line is different from the start line.
Fixes #16531
* refactor(core): provide error message in stack for reflective DI
Fixes#16355
* fix(compiler): make AOT work with `noUnusedParameters`
Fixes#15532
* refactor: use view engine also for `NgModuleFactory`s
This is a prerequisite for being able to mock providers
in AOTed code later on.
Template expressions can now use a post-fix `!` operator
that asserts the target of the operator is not null. This is
similar to the TypeScript non-null assert operator. Expressions
generated in factories will be generated with the non-null assert
operator.
Closes: #10855
This code only runs in ES5 mode in the test suite, so this is difficult to test.
However `updateFromTemplate` is being called with a spread operator, as
`...updateFromTemplate(...)`. The spread operator should fail on `null` values.
This change avoids the problem by always returning a (possibly empty) array.
PR Close#16547
This commit adds a new parameter to ngc named `missingTranslation` to set the MissingTranslationStrategy for AoT, it takes the value `error`, `warning` or `ignore`.
Fixes#15808
PR Close#15987
This only shows up in the language service. Calls to symbols
that are not resolve resulted in null instead of being resolved
causing the language service to see exceptions when the null
was not expected such as in the animations array.
Fixes#15969
- Ensure that the result passes OASIS XLIFF 2.0 schema validation
- Use <ph/> for self-closing placeholder tags
- Use <pc></pc> for other placeholder tags
- Check for the correct XLIFF file version
- Add ICU support
fixes#11735
This only shows up in the language service. Calls to symbols
that are not resolve resulted in null instead of being resolved
causing the language service to see exceptions when the null
was not expected such as in the animations array.
Fixes#15969
Allows to inherit ctor args, lifecycle hooks and statics from a class
in another compilation unit.
Will error if trying to inherit from a class in another compilation unit
that has an `@Component` / `@Directive` / `@Pipe` / `@NgModule`.
This has the side effect of allowing `@Input` and `@ContentChild`
on the same property if the query is static (see the bug description
for details).
Fixes#15417
`ngc` would look for flat module resources relative to the flat module index.
`ngc` now looks for flat module resources relative to the `.d.ts` file that declarates
the component.
Fixes#15221
PR Close#15367
This change reduces the amount of generated code by only adding `log`
calls for elements and text nodes.
We need the `log` calls to allow users to jump to the right place
in the template via source maps. However, we only need it for element
and text nodes, but not for directives, queries, … as for them we
first locate the corresponding element or text node.
Related to #15239
PR Close#15350
We extracted ids from i18n attributes but forgot to use them when merging the translations, resulting in an error about missing translations even when they were correctly defined.
Fixes#15234
PR Close#15302
If a directive has not bindings nor has a `ngDoCheck` / `ngOnInit`
lifecycle hook, don’t generate a `check` call.
This does not have an impact on the behavior, but produces
less code.
PR Close#15322
This reverts commit 8b5c6b2732.
This feature is not compatible with the `Injector.get` which now only
takes `Type` or `InjectableToken`. `Symbol` is not a valid type.
Closes#15183
PR Close#15319
Previously, a pipe that returned a `WrappedValue` would force the change
of the next bound property, independent of the binding in which the pipe
was used.
Now only the binding in which the `WrappedValue` is used will be assumed
as changed.
Fixes#15116
PR Close#15257
Closure compiler is very sensitive to top level function calls.
This commit makes the function calls `createComponentFactory`
and `createRendererTypeV2` logic-less.
Fixes#15181
PR Close#15214
DEPRECATION:
- the arguments `inputs` / `outputs` / `ngContentSelectors` of `downgradeComponent`
are no longer used as Angular calculates these automatically now.
- Compiler.getNgContentSelectors is deprecated. Use
ComponentFactory.ngContentSelectors instead.
E.g. for a component like this:
```
@Component({
template: ‘<ng-content select=“child”></ng-content>’
})
class MyComp {
@Input(‘aInputName’)
aInputProp: string;
@Output(‘aEventName’)
aOuputProp: EventEmitter<any>;
}
```
the `ComponentFactory` will now contain the following:
- `inputs = {aInputProp: ‘aInputName’}`
- `outputs = {aOutputProp: ‘aOutputName’}`
- `ngContentSelectors = [‘child’]`
Fixes:
- In G3, filePaths don’t start with a `/` and therefore became relative.
- Always using the `ng://` prefix groups angular resources in the same
way for AOT and JIT.
Inlcuded fixes:
- include preamble in generated source map
- always add a mapping for line/col 0 so that the
generated sourcemap is not sparse
- use a uniue sourceUrl for inline templates even
in the AOT case
DEPRECATION:
- the arguments `inputs` / `outputs` / `ngContentSelectors` of `downgradeComponent`
are no longer used as Angular calculates these automatically now.
- Compiler.getNgContentSelectors is deprecated. Use
ComponentFactory.ngContentSelectors instead.
E.g. for a component like this:
```
@Component({
template: ‘<ng-content select=“child”></ng-content>’
})
class MyComp {
@Input(‘aInputName’)
aInputProp: string;
@Output(‘aEventName’)
aOuputProp: EventEmitter<any>;
}
```
the `ComponentFactory` will now contain the following:
- `inputs = {aInputProp: ‘aInputName’}`
- `outputs = {aOutputProp: ‘aOutputName’}`
- `ngContentSelectors = [‘child’]`
* feat(common): support `as` syntax in template/* bindings
Closes#15020
Showing the new and the equivalent old syntax.
- `*ngIf="exp as var1”`
=> `*ngIf="exp; let var1 = ngIf”`
- `*ngFor="var item of itemsStream |async as items”`
=> `*ngFor="var item of itemsStream |async; let items = ngForOf”`
* feat(common): convert ngIf to use `*ngIf="exp as local“` syntax
* feat(common): convert ngForOf to use `*ngFor=“let i of exp as local“` syntax
* feat(common): expose NgForOfContext and NgIfContext
In v2.x, users had to annotate classes that they intended to use as tokens with `@Injectable`. This is no longer required in v4.x for tokens,
and we now require the constructor parameters of classes annotated
with `@Injectable` to be statically analyzable by ngc.
This commit reduces the error into a warning
if the constructor parameters do not meet this condition.
DEPRECATION:
- Classes annotated with `@Injectable` but whose constructor’s parameter types
are not statically analyzable by ngc will produce a warning.
Closes#15003
Currently, it says:
Unexpected value 'FuzzyTimePipe in
javascript/angular2/example/search/fuzzy_time.ts' declared by the module
'SearchModule in javascript/angular2/example/search/search_module.ts'
The new error message also suggests: 'Please add a @Pipe/@Directive/@Component annotation.'
fixes#12869fixes#12889fixes#13885fixes#13870
Before this change there was a single injector tree.
Now we have 2 injector trees, one for the modules and one for the components.
This fixes lazy loading modules.
See the design docs for details:
https://docs.google.com/document/d/1OEUIwc-s69l1o97K0wBd_-Lth5BBxir1KuCRWklTlI4
BREAKING CHANGES
`ComponentFactory.create()` takes an extra optional `NgModuleRef` parameter.
No change should be required in user code as the correct module will be used
when none is provided
DEPRECATIONS
The following methods were used internally and are no more required:
- `RouterOutlet.locationFactoryResolver`
- `RouterOutlet.locationInjector`
BREAKING CHANGE:
Perviously, any provider that had an ngOnDestroy lifecycle hook would be created eagerly.
Now, only classes that are annotated with @Component, @Directive, @Pipe, @NgModule are eager. Providers only become eager if they are either directly or transitively injected into one of the above.
This also makes all `useValue` providers eager, which
should have no observable impact other than code size.
EXPECTED IMPACT:
Making providers eager was an incorrect behavior and never documented.
Also, providers that are used by a directive / pipe / ngModule stay eager.
So the impact should be rather small.
Fixes#14552
The main use case for the generated source maps is to give
errors a meaningful context in terms of the original source
that the user wrote.
Related changes that are included in this commit:
* renamed virtual folders used for jit:
* ng://<module type>/module.ngfactory.js
* ng://<module type>/<comp type>.ngfactory.js
* ng://<module type>/<comp type>.html (for inline templates)
* error logging:
* all errors that happen in templates are logged
from the place of the nearest element.
* instead of logging error messages and stacks separately,
we log the actual error. This is needed so that browsers apply
source maps to the stack correctly.
* error type and error is logged as one log entry.
Note that long-stack-trace zone has a bug that
disables source maps for stack traces,
see https://github.com/angular/zone.js/issues/661.
BREAKING CHANGE:
- DebugNode.source no more returns the source location of a node.
Closes 14013
Kara Erickson
Victor Berchet
Alex Rickabaugh
Pawel Kozlowski
Matias Niemelä
Carlos Ortiz Garcia
Rob Wormald
Ben Lesh
Rado Kirov
John Papa
Alan Agius
alexzuza
JoostK
swseverance
Misko Hevery
Pete Bacon Darwin
Keen Yee Liau
Veres Lajos
Olivier Combe
Chuck Jazdzewski
Oussama Ben Brahim
Trotyl
Zhicheng Wang
Victor Noel
Alex Eagle
Tobias Bosch
Vikram Subramanian
Yuan Gao
Jason Aden
Jeremy Elbourn
Zhicheng Wang
Marc Laval
olegdunkan
Andrew Mitchell
Martin Probst
David
Randall Koutnik
Panuruj Khambanonda (PK)
Dzmitry Shylovich
Aliaksei Kuncevic
Aliaksei Kuncevič
Bowen Ni