Often the types of an `@Input`'s field don't fully reflect the types of
assignable values. This can happen when an input has a getter/setter pair
where the getter always returns a narrow type, and the setter coerces a
wider value down to the narrow type.
For example, you could imagine an input of the form:
```typescript
@Input() get value(): string {
return this._value;
}
set value(v: {toString(): string}) {
this._value = v.toString();
}
```
Here, the getter always returns a `string`, but the setter accepts any value
that can be `toString()`'d, and coerces it to a string.
Unfortunately TypeScript does not actually support this syntax, and so
Angular users are forced to type their setters as narrowly as the getters,
even though at runtime the coercion works just fine.
To support these kinds of patterns (e.g. as used by Material), this commit
adds a compiler feature called "input coercion". When a binding is made to
the 'value' input of a directive like MatInput, the compiler will look for a
static field with the name ngAcceptInputType_value. If such a field is found
the type-checking expression for the input will use the static field's type
instead of the type for the @Input field,allowing for the expression of a
type conversion between the binding expression and the value being written
to the input's field.
To solve the case above, for example, MatInput might write:
```typescript
class MatInput {
// rest of the directive...
static ngAcceptInputType_value: {toString(): string};
}
```
FW-1475 #resolve
PR Close#33243
Decrease `MIN_SAMPLE_DURATION` to make it more likely that we cane fit into single time slice.
Increase `MIN_SAMPLE_COUNT_NO_IMPROVEMENT` to make it more likely to find the best
PR Close#33341
change the existing implementation from using
```
string.split(/\s+/);
```
to a char scan which performers the same thing.
The reason why `split(/\s+/)` is slow is that:
- `/\s+/` allocates new `RegExp` every time this code executes.
- `RegExp` scans are a lot more expensive because they are more powerful.
PR Close#33326
Prior to this change, a method call of a local template variable would
incorrectly be considered a call to a method on the component class.
For example, this pattern would produce an error:
```
<ng-template let-method>{{ method(1) }}</ng-template>
```
Here, the method call should be targeting the `$implicit` variable on
the template context, not the component class. This commit corrects the
behavior by first resolving methods in the template before falling back
on the component class.
Fixes#32900
PR Close#33132
In View Engine, with fullTemplateTypeCheck mode disabled, the type of any
inferred based on the entity being referenced. This is a bug, since the
goal with fullTemplateTypeCheck: false is for Ivy and VE to be aligned in
terms of type inference.
This commit adds a 'checkTypeOfReference' flag in the TypeCheckingConfig
to control this inference, and sets it to false when fullTemplateTypeCheck
is disabled.
PR Close#33261
PR#28396 originally addressed an update via issue #23983 to make images more visible with a white background (implementation of gray "lightbox").
This PR implements those styles defined in PR#28396.
PR Close#33259
Libraries can expose directive/component base classes that will be
used by consumer applications. Using such a base class from another
compilation unit works fine with "ngtsc", but when using "ngc", the
compiler will thrown an error saying that the base class is not
part of a NgModule. e.g.
```
Cannot determine the module for class X in Y! Add X to the NgModule to fix it.
```
This seems to be because the logic for distinguishing directives from
abstract directives is scoped to the current compilation unit within
ngc. This causes abstract directives from other compilation units to
be considered as actual directives (causing the exception).
PR Close#33347
In the example, there's no directive nor input that's named `appHighlightColor`.
It should be `appHighlight`, referring to the input binding.
PR Close#33331
This should be removed before for 9.0.0 rc
BREAKING CHANGE:
@angular/bazel ng_setup_workspace() is no longer needed and has been removed.
We assume you will fetch rules_nodejs in your WORKSPACE file, and no other dependencies remain here.
Simply remove any calls to this function and the corresponding load statement.
PR Close#33330
It looks like the gulp setup does not work with NodeJS v12. This
is because we still use gulp for a few tasks, but gulp v3 is not
compatible with NodeJS v12. We had a similar issue for NodeJS v12,
but worked around it by updating the `natives` module version.
To actually solve this in a more future-proof way, without
updating or removing Gulp (for now), we just overwrite the
`graceful-fs` version. The latest version of `graceful-fs`
does no longer depend on the `natives` package and therefore
works properly with NodeJS >= v10.
PR Close#33348
Previously, when navigating to a new page via a link, the scroll
position was correctly restored to 0, but navigating to a new page via
typing the URL in the browser address bar keeps the old scroll position.
This commit ensures that the scroll position is restored to 0 whenever
the `ScrollService` is instantiated anew (i.e. new page navigation). The
old behavior of retaining the scroll position on reload is kept by
storing the old URL when leaving a page and only applying the stored
scroll position if the new URL matches the stored one.
Fixes#33260
PR Close#33344
This commit adds a guide to AIO navigation for
"Migrating to Version 9" and moves the schematics
section into the guide that previously lived in
the deprecations page. It also pastes a snippet
of the deprecations page in the new guide so users
don't have to filter out deprecations they've seen
before.
Note: Ivy compatibility section is coming up in a
follow-up PR.
PR Close#33339
The error message has been updated in #33199 to mention `ng add @angular/localize`.
This also fixes the tslint config (it needs to mention the complete side effect import).
PR Close#33275
Prior to this commit, we always invoked second i18n pass (in case whitespace removal is on, which is a default), even if a given template doesn't contain i18n information. Now we store a flag (that indicates presence of i18n information in a template) during first i18n pass and use it to check whether second pass is needed.
PR Close#33284
When computing i18n messages for templates there are two passes.
This is because messages must be computed before any whitespace
is removed. Then on a second pass, the messages must be recreated
but reusing the message ids from the first pass.
Previously ICUs were losing their legacy ids that had been computed
via the first pass. This commit fixes that by keeping track of the
message from the first pass (`previousMessage`) for ICU placeholder
nodes.
// FW-1637
PR Close#33318
Previously the parameter was `id` which is ambigous because it
could be a computed value rather than a developer specified custom
value.
PR Close#33318
This commit cleans up the I18MetaVisitor code by moving all the
state of the visitor into a `context` object that gets passed along
as the nodes are being visited. This is in keeping with how visitors
are designed but also makes it easy to remove the
[definite assignment assertions](https://mariusschulz.com/blog/strict-property-initialization-in-typescript#solution-4-definite-assignment-assertion)
from the class properties.
Also, a `I18nMessageFactory` named type is exported to make it
clearer to consumers of the `createI18nMessageFactory()` function.
PR Close#33318
This is a potential fix for https://github.com/angular/vscode-ng-language-service/issues/235
suggested by @andrius-pra in
47696136e3.
Currently, CRLF line endings are converted to LFs and this causes the
diagnostics span to be off in templates that use CRLF. The line endings
must be preserved in order to maintain correct span offset. The solution
is to add an option to the Tokenizer to indicate such preservation.
PR Close#33241
This commit adapts the private NgModule re-export system (using aliasing) to
ngcc. Not all ngcc compilations are compatible with these re-exports, as
they assume a 1:1 correspondence between .js and .d.ts files. The primary
concern here is supporting them for commonjs-only packages.
PR Close#33177
This commit refactors the aliasing system to support multiple different
AliasingHost implementations, which control specific aliasing behavior
in ngtsc (see the README.md).
A new host is introduced, the `PrivateExportAliasingHost`. This solves a
longstanding problem in ngtsc regarding support for "monorepo" style private
libraries. These are libraries which are compiled separately from the main
application, and depended upon through TypeScript path mappings. Such
libraries are frequently not in the Angular Package Format and do not have
entrypoints, but rather make use of deep import style module specifiers.
This can cause issues with ngtsc's ability to import a directive given the
module specifier of its NgModule.
For example, if the application uses a directive `Foo` from such a library
`foo`, the user might write:
```typescript
import {FooModule} from 'foo/module';
```
In this case, foo/module.d.ts is path-mapped into the program. Ordinarily
the compiler would see this as an absolute module specifier, and assume that
the `Foo` directive can be imported from the same specifier. For such non-
APF libraries, this assumption fails. Really `Foo` should be imported from
the file which declares it, but there are two problems with this:
1. The compiler would have to reverse the path mapping in order to determine
a path-mapped path to the file (maybe foo/dir.d.ts).
2. There is no guarantee that the file containing the directive is path-
mapped in the program at all.
The compiler would effectively have to "guess" 'foo/dir' as a module
specifier, which may or may not be accurate depending on how the library and
path mapping are set up.
It's strongly desirable that the compiler not break its current invariant
that the module specifier given by the user for the NgModule is always the
module specifier from which directives/pipes are imported. Thus, for any
given NgModule from a particular module specifier, it must always be
possible to import any directives/pipes from the same specifier, no matter
how it's packaged.
To make this possible, when compiling a file containing an NgModule, ngtsc
will automatically add re-exports for any directives/pipes not yet exported
by the user, with a name of the form: ɵngExportɵModuleNameɵDirectiveName
This has several effects:
1. It guarantees anyone depending on the NgModule will be able to import its
directives/pipes from the same specifier.
2. It maintains a stable name for the exported symbol that is safe to depend
on from code on NPM. Effectively, this private exported name will be a
part of the package's .d.ts API, and cannot be changed in a non-breaking
fashion.
Fixes#29361
FW-1610 #resolve
PR Close#33177
Changed `setValue` documentation for throwing an error as it contained a grammar
mistake and also may have caused ambiguity around when exactly the
method would throw.
PR Close#33126
Andrus Diaz
Alex Rickabaugh
Misko Hevery
Igor Minar
Andrew Kushnir
JoostK
Stefanie Fluin
Paul Gschwendtner
ODAVING
Keen Yee Liau
Keen Yee Liau
Greg Magolan
George Kalpakas
Kara Erickson
cexbrayat
Kapunahele Wong
Pete Bacon Darwin
Joey Perrott
TinyMan
David Sánchez
Colum Ferry