Adds the `LinkablePackageInfo` to the `ng_module` rule. This allows
the linker to properly link `ng_module` targets in Node runtime
actions. Currently this does not work properly and packages like
`@angular/core` are not linked, so we cannot rely on the linker.
9a5de3728b/internal/linker/link_node_modules.bzl (L144-L146).
PR Close#37623
As of Angular Package Format v10, we no longer ship a `fesm5` and
`fesm5` output in packages. We made this change to the `ng_package`
rule but intentionally did not clean up related build actions.
This follow-up commit cleans this up by:
* No longer building fesm5 bundles, or providing esm2015 output.
* No longer requesting and building a third flavor for ESM5. We can
use TSC to downlevel ES2015 sources/prodmode output similarly to how it
is done in `ng-packagr`.
The third output flavor (ESM5) resulted in a build slow-down as we
required a full recompilation of sources. Now, we only have a single
compilation for prodmode output, and then downlevel it on-demand
to ES5 for the UMD bundles. Here is timing for building the release
packages in `angular/angular` before this change, and afterwards:
* Before: 462.157s = ~7.7min
* After: 339.703s = ~5.6min
This signifies a time reduction by 27% when running
`./scripts/build/build-packages-dist.sh`.
PR Close#37623
This dependency host tokenizes files to identify all the imported
paths. This commit calculates the last place in the source code
where there can be an import path; it then exits the tokenization
when we get to this point in the file.
Testing with a reasonably large project showed that the tokenizer
spends about 2/3 as much time scanning files. For example in a
"noop" hot run of ngcc using the program-based entry-point
finder the percentage of time spent in the `scan()` function of
the TS tokenizer goes down from 9.9% to 6.6%.
PR Close#37639
The ContentChildren decorator has a metadata property named "read" which
can be used to read a different token from the queried elements. The
documentation incorrectly says "True to read..." when it should say
"Used to read...".
PR Close#37626
For URLs that use auxiliary route outlets in the second or following path segments,
when removing the auxiliary route segment, parenthesis remain for the primary outlet segment.
This causes the following error when trying to reload an URL: "Cannot match any route".
The commit adds a check for this scenario, serializing the URL as "a/b" instead of "a/(b)".
PR Close#24656
PR Close#37163
In routerLink if a fragment is added than fragment example shows that it is added before the params '/user/bob#education?debug=true' but actually they are added after that '/user/bob?debug=true#education' changed documentation to show correct example
Fixes#18630
PR Close#37590
This feature is aimed at development tooling that has to translate
production build inputs into their devmode equivalent. The current
process involves guessing the devmode filename based on string
replace patterns. This allows consuming build actions to read the
known mappings instead.
This is a change in anticipation of an update to the general
Typescript build rules to consume this data.
PR Close#36262
The method was previously looping through all controls, even after finding at least one that
satisfies the provided condition. This can be a bottleneck with large forms. The new version
of the method returns as soon as a single control which conforms to the condition is found.
PR Close#32534
We recently added a transformer to NGC that is responsible for downleveling Angular
decorators and constructor parameter types. The primary goal was to mitigate a
TypeScript limitation/issue that surfaces in Angular projects due to the heavy
reliance on type metadata being captured for DI. Additionally this is a pre-requisite
of making `tsickle` optional in the Angular bazel toolchain.
See: 401ef71ae5 for more context on this.
Another (less important) goal was to make sure that the CLI can re-use
this transformer for its JIT mode compilation. The CLI (as outlined in
the commit mentioned above), already has a transformer for downleveling
constructor parameters. We want to avoid this duplication and exported
the transform through the tooling-private compiler entry-point.
Early experiments in using this transformer over the current one, highlighted
that in JIT, class decorators cannot be downleveled. Angular relies on those
to be invoked immediately for JIT (so that factories etc. are generated upon loading)
The transformer we exposed, always downlevels such class decorators
though, so that would break CLI's JIT mode. We can address the CLI's
needs by adding another flag to skip class decorators. This will allow
us to continue with the goal of de-duplication.
PR Close#37545
Commit 24b2f1da2b introduced an `NgCompiler` which operates on a
`ts.Program` independently of the `NgtscProgram`. The NgCompiler got its
`IncrementalDriver` (for incremental reuse of Angular compilation results)
by looking at a monkey-patched property on the `ts.Program`.
This monkey-patching operation causes problems with the Angular indexer
(specifically, it seems to cause the indexer to retain too much of prior
programs, resulting in OOM issues). To work around this, `IncrementalDriver`
reuse is now handled by a dedicated `IncrementalBuildStrategy`. One
implementation of this interface is used by the `NgtscProgram` to perform
the old-style reuse, relying on the previous instance of `NgtscProgram`
instead of monkey-patching. Only for `NgTscPlugin` is the monkey-patching
strategy used, as the plugin sits behind an interface which only provides
access to the `ts.Program`, not a prior instance of the plugin.
PR Close#37339
The default value was changed from `registerWhenStable` to
`registerWhenStable:30000` in 29e8a64cf0,
but the decumentation was not updated to reflect that.
This commit updates the documentation to mention the correct default
value.
PR Close#37555
In `a ? b.~{cursor}`, the LS will provide the symbols in the scope of the current template, because the `path.tail` is `falseExp` whose value is `EmptyExpr`, and the span of `falseExp` is wider than the `trueExp`, so the value of `path` should be narrowed.
PR Close#37505
This feature is aimed at development tooling that has to translate
production build inputs into their devmode equivalent. The current
process involves guessing the devmode filename based on string
replace patterns. This allows consuming build actions to read the
known mappings instead.
This is a change in anticipation of an update to the general
Typescript build rules to consume this data.
PR Close#36262
This checks for a Bazel flag in `ng_module()` in the `_renderer` attribute
which specifies the renderer to use for the build.
The main advantage of this flag is that it can be overridden with [Bazel
transitions](https://docs.bazel.build/versions/master/skylark/config.html),
giving much more flexibility for migrating individual applications in a
Bazel workspace to Ivy.
This flag is not intended to replace `--config ivy` or
`--define angular_ivy_enabled=True` (although it technically could). As a
result, this flag is not and will not actually be used anywhere in the
`angular/angular` repo. Instead, a `string_flag()` is provided internally
which sets the renderer via a transition. See http://cl/315749946.
Note that this does **not** introduce a dependency on Skylib for
`angular/angular`. The dependency isn't actually necessary because
`BuildSettingInfo` is not used externally anyways. By doing this, it is not
necessary for downstream, external workspaces to depend on Skylib.
PR Close#37529
Historically files to be formatted were added to a listing (via matchers)
to be included in formatting. Instead, this change begins efforts to
instead include all files in format enforcement, relying instead on an
opt out methodology.
PR Close#36940
Currently the partial evaluator isn't able to resolve a variable declaration that uses destructuring in the form of `const {value} = {value: 0}; const foo = value;`. These changes add some logic to allow for us to resolve the variable's value.
Fixes#36917.
PR Close#37497
This PR changes the logic for determining when to skip route processing from
using the URL of the last attempted navigation to the actual resulting URL after
that transition.
Because guards may prevent navigation and reset the browser URL, the raw
URL of the previous transition may not match the actual URL of the
browser at the end of the navigation process. For that reason, we need to use
`urlAfterRedirects` instead.
Other notes:
These checks in scheduleNavigation were added in eb2ceff4ba
The test still passes and, more surprisingly, passes if the checks are removed
completely. There have likely been changes to the navigation handling that
handle the test in a different way. That said, it still appears to be important
to keep the checks there in some capacity because it does affect how many
navigation events occur. This addresses an issue that came up in #16710: https://github.com/angular/angular/issues/16710#issuecomment-634869739
This also partially addresses #13586 in fixing history for imperative
navigations that are cancelled by guards.
PR Close#37408
Previously, ngcc would only be able to match an ngcc configuration to
packages that were located inside the project's top-level
`node_modules/`. However, if there are multiple versions of a package in
a project (e.g. as a transitive dependency of other packages), multiple
copies of a package (at different versions) may exist in nested
`node_modules/` directories. For example, one at
`<project-root>/node_modules/some-package/` and one at
`<project-root>/node_modules/other-package/node_modules/some-package/`.
In such cases, ngcc was only able to detect the config for the first
copy but not for the second.
This commit fixes this by returning a new instance of
`ProcessedNgccPackageConfig` for each different package path (even if
they refer to the same package name). In these
`ProcessedNgccPackageConfig`, the `entryPoints` paths have been
processed to take the package path into account.
PR Close#37040
This commit adds a `packageName` property to the `EntryPoint` interface.
In a subsequent commit this will be used to retrieve the correct ngcc
configuration for each package, regardless of its path.
PR Close#37040
In order to retrieve the ngcc configuration (if any) for an entry-point,
ngcc has to detect the containing package's version.
Previously, ngcc would try to read the version from the entry-point's
`package.json` file, which was different than the package's top-level
`package.json` for secondary entry-points. For example, it would try to
read it from `node_modules/@angular/common/http/package.json` for
entry-point `@angular/common/http`. However, the `package.json` files
for secondary entry-points are not guaranteed to include a `version`
property.
This commit fixes this by first trying to read the version from the
_package's_ `package.json` (falling back to the entry-point's
`package.json`). For example, it will first try to read it from
`@angular/common/package.json` for entry-point `@angular/common/http`.
PR Close#37040
This commit refactors the way info is retrieved from entry-point
`package.json` files to make it easier to extract more info (such as the
package's name) in the future. It also avoids reading and parsing the
`package.json` file multiple times (as was happening before).
PR Close#37040
Rename the `package` property to `packagePath` on the `EntryPoint`
interface. This makes it more clear that the `packagePath` property
holds the absolute path to the containing package (similar to how `path`
holds the path to the entry-point). This will also align with the
`packageName` property that will be added in a subsequent commit.
This commit also re-orders the `EntryPoint` properties to group related
properties together and to match the order of properties on instances
with that on the interface.
PR Close#37040
Previously, when an entry-point was ignored via an ngcc config, ngcc
would scan sub-directories for sub-entry-points, but would not use the
correct `packagePath`. For example, if `@angular/common` was ignored, it
would look at `@angular/common/http` but incorrectly use
`.../@angular/common/http` as the `packagePath` (instead of
`.../@angular/common`). As a result, it would not retrieve the correct
ngcc config for the actual package.
This commit fixes it by ensuring the correct `packagePath` is used, even
if the primary entry-point corresponding to that path is ignored. In
order to do this, a new return value for `getEntryPointInfo()` is added:
`IGNORED_ENTRY_POINT`. This is used to differentiate between directories
that correspond to no or an incompatible entry-point and those that
correspond to an entry-point that could otherwise be valid but is
explicitly ignored. Consumers of `getEntryPointInfo()` can then use this
info to discard ignored entry-points, but still use the correct
`packagePath` when scanning their sub-directories for secondary
entry-points.
PR Close#37040
In the early Zone.js versions (< 0.10.3), `ZoneAwarePromise` did not support `Symbol.species`,
so when user used a 3rd party `Promise` such as `es6-promise`, and try to load the promise library after import of `zone.js`, the loading promise library will overwrite the patched `Promise` from `zone.js` and will break `Promise` semantics with respect to `zone.js`.
Starting with `zone.js` 0.10.3, `Symbol.species` is supported therefore this will not longer be an issue. (https://github.com//pull/34533)
Before 0.10.3, the logic in zone.js tried to handle the case in the wrong way. It did so by overriding the descriptor of `global.Promise`, to allow the 3rd party libraries to override native `Promise` instead of `ZoneAwarePromise`. This is not the correct solution, and since the `Promise.species` is now supported, the 3rd party solution of overriding `global.Promise` is no longer needed.
PR removes the wrong work around logic. (This will improve the bundle size.)
PR Close#36851
Close#36839.
This is a known issue of zone.js,
```
(window as any)[(Zone as any).__symbol__('setTimeout')](() => {
let log = '';
button.addEventListener('click', () => {
Zone.current.scheduleMicroTask('test', () => log += 'microtask;');
log += 'click;';
});
button.click();
expect(log).toEqual('click;microtask;');
done();
});
```
Since in this case, we use native `setTimeout` which is not a ZoneTask,
so zone.js consider the button click handler as the top Task then drain the
microTaskQueue after the click at once, which is not correct(too early).
This case was an edge case and not reported by the users, until we have the
new option ngZoneEventCoalescing, since the event coalescing will happen
in native requestAnimationFrame, so it will not be a ZoneTask, and zone.js will
consider any Task happen in the change detection stage as the top task, and if
there are any microTasks(such as Promise.then) happen in the process, it may be
drained earlier than it should be, so to prevent this situation, we need to schedule
a fake event task and run the change detection check in this fake event task,
so the Task happen in the change detection stage will not be
considered as top ZoneTask.
PR Close#36841
Currently Angular internally already handles `InjectionToken` as
predicates for queries. This commit exposes this as public API as
developers already relied on this functionality but currently use
workarounds to satisfy the type constraints (e.g. `as any`).
We intend to make this public as it's low-effort to support, and
it's a significant key part for the use of light-weight tokens as
described in the upcoming guide: https://github.com/angular/angular/pull/36144.
In concrete, applications might use injection tokens over classes
for both optional DI and queries, because otherwise such references
cause classes to be always retained. This was also an issue in View
Engine, but now with Ivy, this pattern became worse, as factories are
directly attached to retained classes (ultimately ending up in the
production bundle, while being unused).
More details in the light-weight token guide and in: https://github.com/angular/angular-cli/issues/16866.
Closes#21152. Related to #36144.
PR Close#37506
Build-optimizer currently uses TypeScript 3.6 which is unable to resolve an 'accessor' in 'getTypeOfVariableOrParameterOrPropertyWorker'.
Unfortunately, in Build optimizer we cannot update the version of TypeScript because of https://github.com/microsoft/TypeScript/issues/38412
PR Close#37456
Adds @nocollapse to static properties added by ngcc
iff annotateForClosureCompiler is true.
The Closure Compiler will collapse static properties
into the global namespace. Adding this annotation keeps
the properties attached to their respective object, which
allows them to be referenced via a class's constructor.
The annotation is already added by ngtsc and ngc under the
same option, this commit extends the functionality to ngcc.
Closes#36618.
PR Close#36652
There were some examples for 'DoCheck' in the lifeCycle hooks guide. Added a link to the relevant section of the guide in the 'DoCheck()' api docs.
Fixes#35596
PR Close#36574
Zone.js has a lot of optional bundles, such as `zone-patch-message-port`, those
bundles are monkey patch for specified APIs usually for soem experimental APIs or
some old APIs only available for specified platforms. Those bundles will not be
loaded by default.
In this commit, since we have several main `sub packages` such as `zone`, `zone-node`,
`zone-testing`, I put all the optional bundles under `plugins` folders for consistency.
PR Close#36540
Close#35157
In the current version of zone.js, zone.js uses it's own package format, and it is not following the rule
of Angualr package format(APF), so it is not easily to be consumed by Angular CLI or other bundle tools.
For example, zone.js npm package has two bundles,
1. zone.js/dist/zone.js, this is a `es5` bundle.
2. zone.js/dist/zone-evergreen.js, this is a `es2015` bundle.
And Angular CLI has to add some hard-coding code to handle this case, o5376a8b139/packages/schematics/angular/application/files/src/polyfills.ts.template (L55-L58)
This PR upgrade zone.js npm package format to follow APF rule, https://docs.google.com/document/d/1CZC2rcpxffTDfRDs6p1cfbmKNLA6x5O-NtkJglDaBVs/edit#heading=h.k0mh3o8u5hx
The updated points are:
1. in package.json, update all bundle related properties
```
"main": "./bundles/zone.umd.js",
"module": "./fesm2015/zone.js",
"es2015": "./fesm2015/zone.js",
"fesm2015": "./fesm2015/zone.js",
```
2. re-organize dist folder, for example for `zone.js` bundle, now we have
```
dist/
bundles/
zone.js // this is the es5 bundle
fesm2015/
zone.js // this is the es2015 bundle (in the old version is `zone-evergreen.js`)
```
3. have several sub-packages.
1. `zone-testing`, provide zone-testing bundles include zone.js and testing libraries
2. `zone-node`, provide zone.js implemention for NodeJS
3. `zone-mix`, provide zone.js patches for both Browser and NodeJS
All those sub-packages will have their own `package.json` and the bundle will reference `bundles(es5)` and `fesm2015(es2015)`.
4. keep backward compatibility, still keep the `zone.js/dist` folder, and all bundles will be redirected to `zone.js/bundles` or `zone.js/fesm2015` folders.
PR Close#36540
It is quite common for the TS compiler to have to add synthetic
types to function signatures, where the developer has not
explicitly provided them. This results in `import(...)` expressions
appearing in typings files. For example in `@ngrx/data` there is a
class with a getter that has an implicit type:
```ts
export declare class EntityCollectionServiceBase<...> {
...
get store() {
return this.dispatcher.store;
}
...
}
```
In the d.ts file for this we get:
```ts
get store(): Store<import("@ngrx/data").EntityCache>;
```
Given that this file is within the `@ngrx/data` package already,
this caused ngcc to believe that there was a circular dependency,
causing it to fail to process the package - and in fact crash!
This commit resolves this problem by ignoring `import()` expressions
when scanning typings programs for dependencies. This ability was
only introduced very recently in a 10.0.0 RC release, and so it has
limited benefit given that up till now ngcc has been able to process
libraries effectively without it. Moreover, in the rare case that a
package does have such a dependency, it should get picked up
by the sync ngcc+CLI integration point.
PR Close#37503
This commit removes the autocompletion feature for HTML entities.
HTML entites are things like `&`, `<` etc.
There are a few reasons for the decision:
1. It is outside the core functionality of Angular LS
2. The implementation relies on regex, which incurs performance cost
3. There isn't much value if users do not already know which entity
they want to use
4. The list that we provide is not exhaustive
PR Close#37515
In v7 of Angular we removed `tsickle` from the default `ngc` pipeline.
This had the negative potential of breaking ES2015 output and SSR due
to a limitation in TypeScript.
TypeScript by default preserves type information for decorated constructor
parameters when `emitDecoratorMetadata` is enabled. For example,
consider this snippet below:
```
@Directive()
export class MyDirective {
constructor(button: MyButton) {}
}
export class MyButton {}
```
TypeScript would generate metadata for the `MyDirective` class it has
a decorator applied. This metadata would be needed in JIT mode, or
for libraries that provide `MyDirective` through NPM. The metadata would
look as followed:
```
let MyDirective = class MyDir {}
MyDirective = __decorate([
Directive(),
__metadata("design:paramtypes", [MyButton]),
], MyDirective);
let MyButton = class MyButton {}
```
Notice that TypeScript generated calls to `__decorate` and
`__metadata`. These calls are needed so that the Angular compiler
is able to determine whether `MyDirective` is actually an directive,
and what types are needed for dependency injection.
The limitation surfaces in this concrete example because `MyButton`
is declared after the `__metadata(..)` call, while `__metadata`
actually directly references `MyButton`. This is illegal though because
`MyButton` has not been declared at this point. This is due to the
so-called temporal dead zone in JavaScript. Errors like followed will
be reported at runtime when such file/code evaluates:
```
Uncaught ReferenceError: Cannot access 'MyButton' before initialization
```
As noted, this is a TypeScript limitation because ideally TypeScript
shouldn't evaluate `__metadata`/reference `MyButton` immediately.
Instead, it should defer the reference until `MyButton` is actually
declared. This limitation will not be fixed by the TypeScript team
though because it's a limitation as per current design and they will
only revisit this once the tc39 decorator proposal is finalized
(currently stage-2 at time of writing).
Given this wontfix on the TypeScript side, and our heavy reliance on
this metadata in libraries (and for JIT mode), we intend to fix this
from within the Angular compiler by downleveling decorators to static
properties that don't need to evaluate directly. For example:
```
MyDirective.ctorParameters = () => [MyButton];
```
With this snippet above, `MyButton` is not referenced directly. Only
lazily when the Angular runtime needs it. This mitigates the temporal
dead zone issue caused by a limitation in TypeScript's decorator
metadata output. See: https://github.com/microsoft/TypeScript/issues/27519.
In the past (as noted; before version 7), the Angular compiler by
default used tsickle that already performed this transformation. We
moved the transformation to the CLI for JIT and `ng-packager`, but now
we realize that we can move this all to a single place in the compiler
so that standalone ngc consumers can benefit too, and that we can
disable tsickle in our Bazel `ngc-wrapped` pipeline (that currently
still relies on tsickle to perform this decorator processing).
This transformation also has another positive side-effect of making
Angular application/library code more compatible with server-side
rendering. In principle, TypeScript would also preserve type information
for decorated class members (similar to how it did that for constructor
parameters) at runtime. This becomes an issue when your application
relies on native DOM globals for decorated class member types. e.g.
```
@Input() panelElement: HTMLElement;
```
Your application code would then reference `HTMLElement` directly
whenever the source file is loaded in NodeJS for SSR. `HTMLElement`
does not exist on the server though, so that will become an invalid
reference. One could work around this by providing global mocks for
these DOM symbols, but that doesn't match up with other places where
dependency injection is used for mocking DOM/browser specific symbols.
More context in this issue: #30586. The TL;DR here is that the Angular
compiler does not care about types for these class members, so it won't
ever reference `HTMLElement` at runtime.
Fixes#30106. Fixes#30586. Fixes#30141.
Resolves FW-2196. Resolves FW-2199.
PR Close#37382
In #29083 a call to `getCompilerFacade` was added to `ApplicationRef` which pulls in a bit of JIT-specific code. Since the code path that calls the function can't be hit for an AOT-compiled app, these changes add an `ngJitMode` guard which will allow for dead code elimination to drop it completely. Testing it out against a new CLI project showed a difference of ~1.2kb.
PR Close#37372
lifecycle hooks api detailed documentation contained links which were pointing to onChanges hook only which is removed, made each hook point towards its deafult page link
PR Close#36557
Previously the comments for these files referenced a path to "packages/core/src/render3/jit/compiler_facade_interface.ts" that does not exist in the current codebase.
This PR corrects the path in these comments.
PR Close#37370
Previously, we would simply prepend any relative URL with the HREF
for the current route (pulled from document.location). However,
this does not correctly account for the leading slash URLs that
would otherwise be parsed correctly in the browser, or the
presence of a base HREF in the DOM.
Therefore, we use the built-in URL implementation for NodeJS,
which implements the WHATWG standard that's used in the browser.
We also pull the base HREF from the DOM, falling back on the full
HREF as the browser would, to form the correct request URL.
Fixes#37314
PR Close#37341
Prevent duplicate notifications from being emitted when multiple URL change listeners are registered using SpyLocation#onUrlChange.
Use `@internal` annotation for the `_urlChangeSubscription` properties instead of the `private` access modifier. Otherwise, we get in trouble because of `SpyLocation implements Location`.
PR Close#37459
Greg Magolan
Paul Gschwendtner
Andrew Kushnir
Pete Bacon Darwin
Tiep Phan
ggradnig
Ajit Singh
Jan Krems
lazarljubenovic
crisbeto
Misko Hevery
Alex Rickabaugh
George Kalpakas
ivanwonder
Aamir Mukaram
Doug Parker
Joey Perrott
Andrew Scott
Judy Bogart
JiaLiPassion
Alan Agius
David Neil
Keen Yee Liau
atscott
AleksanderBodurri
Adam
Lars Gyrup Brink Nielsen