We currently use 16 bits to store information about nodes in a view.
The 16 bits give us 65536 entries in the array, but the problem is that while
the number is large, it can be reached by ~4300 directive instances with host
bindings which could realistically happen is a very large view, as seen in #37876.
Once we hit the limit, we end up overflowing which eventually leads to a runtime error.
These changes bump to using 20 bits which gives us around 1048576 entries in
the array or 16 times more than the current amount which could still technically
be reached, but is much less likely and the user may start hitting browser limitations
by that point.
I picked the 20 bit number since it gives us enough buffer over the 16 bit one,
while not being as massive as a 24 bit or 32 bit.
I've also added a dev mode assertion so it's easier to track down if it happens
again in the future.
Fixes#37876.
PR Close#38014
We recently reworked our `ng_rollup_bundle` rule to no longer output
ESM5 and to optimize applications properly (previously applications were
not optimized properly due to incorrect build optimizer setup).
This change meant that a lot of symbols have been removed from the
golden correctly. See: fd65958b88
Unfortunately though, a few symbols have been accidentally removed
because they are now part of the bundle as ES2015 classes which the
symbol extractor does not pick up. This commit fixes the symbol
extractor to capture ES2015 classes. We also update the golden to
reflect this change.
PR Close#38093
Currently we read lifecycle hooks eagerly during `ɵɵdefineComponent`.
The result is that it is not possible to do any sort of meta-programing
such as mixins or adding lifecycle hooks using custom decorators since
any such code executes after `ɵɵdefineComponent` has extracted the
lifecycle hooks from the prototype. Additionally the behavior is
inconsistent between AOT and JIT mode. In JIT mode overriding lifecycle
hooks is possible because the whole `ɵɵdefineComponent` is placed in
getter which is executed lazily. This is because JIT mode must compile a
template which can be specified as `templateURL` and those we are
waiting for its resolution.
- `+` `ɵɵdefineComponent` becomes smaller as it no longer needs to copy
lifecycle hooks from prototype to `ComponentDef`
- `-` `ɵɵNgOnChangesFeature` feature is now always included with the
codebase as it is no longer tree shakable.
Previously we have read lifecycle hooks from prototype in the
`ɵɵdefineComponent` so that lifecycle hook access would be monomorphic.
This decision was made before we had `T*` data structures. By not
reading the lifecycle hooks we are moving the megamorhic read form
`ɵɵdefineComponent` to instructions. However, the reads happen on
`firstTemplatePass` only and are subsequently cached in the `T*` data
structures. The result is that the overall performance should be same
(or slightly better as the intermediate `ComponentDef` has been
removed.)
- [ ] Remove `ɵɵNgOnChangesFeature` from compiler. (It will no longer
be a feature.)
- [ ] Discuss the future of `Features` as they hinder meta-programing.
Fix#30497
PR Close#35464
Fixes the following issues related to how we validate properties during JIT:
- The invalid property warning was printing `null` as the node name
for `ng-content`. The problem is that when generating a template from
`ng-content` we weren't capturing the node name.
- We weren't running property validation on `ng-container` at all.
This used to be supported on ViewEngine and seems like an oversight.
In the process of making these changes, I found and cleaned up a
few places where we were passing in `LView` unnecessarily.
PR Close#37773
One of the ivy acceptance tests currently fails in IE10. This
is because we recently added a new test that asserts that injecting
`ViewRef` results in a `NullInjectorError`.
Due to limitations in TypeScript and in polyfills for `setPrototypeOf`,
the error cannot be thrown as `ViewRef` is always considered injectable.
In reality, `ViewRef` should not be injectable, as explicitly noted
in c00f4ab2ae.
There seems no way to simulate the proper prototype chain in such
browsers that do not natively support `__proto__`, so TypeScript
and `core-js` polyfills simply break the prototype chain and
assign inherited properties directly on `ViewRef`. i.e. so that
`ViewRef.__NG_ELEMENT_ID__` exists and DI picks it up.
There is a way for TypeScript to theoretically generate proper
prototype chain in ES5 output, but they intend to only bother
about the proper prototype chain in ES6 where `setPrototypeOf`
etc. are offically standarized. See the response:
https://github.com/microsoft/TypeScript/issues/1601#issuecomment-94892833.
PR Close#37892
Before this refactoring we had the WrappedValue class in
2 separate places:
- packages/core/src/change_detection/change_detection_util.ts
- packages/core/src/util/WrappedValue.ts
This commit removes the duplicate, leaving the class that has
the deprecation notice.
PR Close#37940
Currently when the `plural` or `select` keywords in an ICU contain trailing spaces (e.g. `{count, select , ...}`), these spaces are also included into the key names in ICU vars (e.g. "VAR_SELECT "). These trailing spaces are not desirable, since they will later be converted into `_` symbols while normalizing placeholder names, thus causing mismatches at runtime (i.e. placeholder will not be replaced with the correct value). This commit updates the code to trim these spaces while generating an object with placeholders, to make sure the runtime logic can replace these placeholders with the right values.
PR Close#37866
change in the definition of providedIn:any any instance creates a singleton instance
for each lazy loaded module and one instance for eager loaded module
PR Close#35292
PR https://github.com/angular/angular/pull/37523 failed when trying to use `rxjs delay` operator
inside `fakeAsync`, and the reasons are:
1. we need to import `rxjs-fake-async` patch to make the integration work.
2. since in `angular` repo, the bazel target `/tools/testing:node` not using `zone-testing` bundle,
instead it load `zone-spec` packages seperately, so it causes one issue which is the `zone.js/testing/fake-async`
package is not loaded, we do have a fallback logic under `packages/core/testing` calles `fake_async_fallback`,
but the logic is out of date with `fake-async` under `zone.js` package.
So this PR, I updated the content of `fake_async_fallback` to make it consistent with
`fake-async`. And I will make another PR to try to remove the `fallback` logic.
PR Close#37680
Invoking a callback registered through `ViewRef.onDestroy` throws an error, because we weren't registering it correctly in the internal data structure. These changes also remove the `storeCleanupFn` function, because it was mostly identical to `storeCleanupWithContext` and was only used in one place.
Fixes#36213.
PR Close#37543
Special DI tokens like `ChangeDetectorRef` and `ElementRef` can provide a factory via `NG_ELEMENT_ID`. The problem is that we were reading it off the token as `token[NG_ELEMENT_ID]` which will go up the prototype chain if it couldn't be found on the current token, resulting in the private `ViewRef` API being exposed, because it extends `ChangeDetectorRef`.
These changes fix the issue by guarding the property access with `hasOwnProperty`.
Fixes#36235.
PR Close#37574
Verify that HTML parsing is supported in addition to DOMParser existence.
This maybe wasn't as important before when DOMParser was used just as a
fallback on Firefox, but now that DOMParser is the default choice, we need
to be more accurate.
PR Close#36578
The `inertDocument` member is only needed when using the InertDocument
strategy. By separating the DOMParser and InertDocument strategies into
separate classes, we can easily avoid creating the inert document
unnecessarily when using DOMParser.
PR Close#36578
If [innerHTML] is used in a component and a Content-Security-Policy is set
that does not allow inline styles then Firefox and Chrome show the following
message:
> Content Security Policy: The page’s settings observed the loading of a
resource at self (“default-src”). A CSP report is being sent.
This message is caused because Angular is creating an inline style tag to
test for a browser bug that we use to decide what sanitization strategy to
use, which causes CSP violation errors if inline CSS is prohibited.
This test is no longer necessary, since the `DOMParser` is now safe to use
and the `style` based check is redundant.
In this fix, we default to using `DOMParser` if it is available and fall back
to `createHTMLDocument()` if needed. This is the approach used by DOMPurify
too.
The related unit tests in `html_sanitizer_spec.ts`, "should not allow
JavaScript execution when creating inert document" and "should not allow
JavaScript hidden in badly formed HTML to get through sanitization (Firefox
bug)", are left untouched to assert that the behavior hasn't changed in
those scenarios.
Fixes#25214.
PR Close#36578
This commit replaces an assert with more descriptive error message that is thrown in case `<ng-template>` or `<ng-container>` is used as host element for a Component.
Resolves#35240.
PR Close#35916
Currently when bootstrapped component is being removed using `ComponentRef.destroy` or `NgModuleRef.destroy` methods, DOM nodes may be retained in the DOM tree. This commit fixes that problem by always attaching host element of the internal root view to the component's host view node, so the cleanup can happen correctly.
Resolves#36449.
PR Close#37600
As of v10, the `undecorated-classes-with-decorated-fields` migration
generally deals with undecorated classes using Angular features. We
intended to run this migation as part of v10 again as undecorated
classes with Angular features are no longer supported in planned v11.
The migration currently behaves incorrectly in some cases where an
`@Injectable` or `@Pipe` decorated classes uses the `ngOnDestroy`
lifecycle hook. We incorrectly add a TODO for those classes. This
commit fixes that.
Additionally, this change makes the migration more robust to
not migrate a class if it inherits from a component, pipe
injectable or non-abstract directive. We previously did not
need this as the undecorated-classes-with-di migration ran
before, but this is no longer the case.
Last, this commit fixes an issue where multiple TODO's could be
added. This happens when multiple Angular CLI build targets have
an overlap in source files. Multiple programs then capture the
same source file, causing the migration to detect an undecorated
class multiple times (i.e. adding a TODO twice).
Fixes#37726.
PR Close#37732
Interestingly enough, our rollup bundle optimization pipeline
did not work properly before 1b827b058e5060963590628d4735e6ac83c6dfdd.
Unused declarations were not elided because build optimizer did not
consider the Angular packages as side-effect free. Build optimizer has
a hard-coded list of Angular packages that are considered side-effect
free. Though this one did not match in the old version of the rollup
bundle rule, as internal sources were resolved through their resolved
bazel-out paths. Hence build optimizer could not detect the known
Angular framework packages. Now though, since we leverage the
Bazel-idiomatic `@bazel/rollup` implementation, sources are resolved
through linked `node_modules`, and build optimizer is able to properly
detect files as side-effect free.
PR Close#37623
Refactors the `ng_rollup_bundle` rule to a macro that relies on
the `@bazel/rollup` package. This means that the rule no longer
deals with custom ESM5 flavour output, but rather only builds
prodmode ES2015 output. This matches the common build output
in Angular projects, and optimizations done in CLI where
ES2015 is the default optimization input.
The motiviation for this change is:
* Not duplicating rollup Bazel rules. Instead leveraging the official
rollup rule.
* Not dealing with a third TS output flavor in Bazel.The ESM5 flavour has the
potential of slowing down local development (as it requires compilation replaying)
* Updating the rule to be aligned with current CLI optimizations.
This also _fixes_ a bug that surfaced in the old rollup bundle rule.
Code that is unused, is not removed properly. The new rule fixes this by
setting the `toplevel` flag. This instructs terser to remove unused
definitions at top-level. This matches the optimization applied in CLI
projects. Notably the CLI doesn't need this flag, as code is always
wrapped by Webpack. Hence, the unused code eliding runs by default.
PR Close#37623
The ContentChildren decorator has a metadata property named "read" which
can be used to read a different token from the queried elements. The
documentation incorrectly says "True to read..." when it should say
"Used to read...".
PR Close#37626
Close#36839.
This is a known issue of zone.js,
```
(window as any)[(Zone as any).__symbol__('setTimeout')](() => {
let log = '';
button.addEventListener('click', () => {
Zone.current.scheduleMicroTask('test', () => log += 'microtask;');
log += 'click;';
});
button.click();
expect(log).toEqual('click;microtask;');
done();
});
```
Since in this case, we use native `setTimeout` which is not a ZoneTask,
so zone.js consider the button click handler as the top Task then drain the
microTaskQueue after the click at once, which is not correct(too early).
This case was an edge case and not reported by the users, until we have the
new option ngZoneEventCoalescing, since the event coalescing will happen
in native requestAnimationFrame, so it will not be a ZoneTask, and zone.js will
consider any Task happen in the change detection stage as the top task, and if
there are any microTasks(such as Promise.then) happen in the process, it may be
drained earlier than it should be, so to prevent this situation, we need to schedule
a fake event task and run the change detection check in this fake event task,
so the Task happen in the change detection stage will not be
considered as top ZoneTask.
PR Close#36841
Currently Angular internally already handles `InjectionToken` as
predicates for queries. This commit exposes this as public API as
developers already relied on this functionality but currently use
workarounds to satisfy the type constraints (e.g. `as any`).
We intend to make this public as it's low-effort to support, and
it's a significant key part for the use of light-weight tokens as
described in the upcoming guide: https://github.com/angular/angular/pull/36144.
In concrete, applications might use injection tokens over classes
for both optional DI and queries, because otherwise such references
cause classes to be always retained. This was also an issue in View
Engine, but now with Ivy, this pattern became worse, as factories are
directly attached to retained classes (ultimately ending up in the
production bundle, while being unused).
More details in the light-weight token guide and in: https://github.com/angular/angular-cli/issues/16866.
Closes#21152. Related to #36144.
PR Close#37506
There were some examples for 'DoCheck' in the lifeCycle hooks guide. Added a link to the relevant section of the guide in the 'DoCheck()' api docs.
Fixes#35596
PR Close#36574
In v7 of Angular we removed `tsickle` from the default `ngc` pipeline.
This had the negative potential of breaking ES2015 output and SSR due
to a limitation in TypeScript.
TypeScript by default preserves type information for decorated constructor
parameters when `emitDecoratorMetadata` is enabled. For example,
consider this snippet below:
```
@Directive()
export class MyDirective {
constructor(button: MyButton) {}
}
export class MyButton {}
```
TypeScript would generate metadata for the `MyDirective` class it has
a decorator applied. This metadata would be needed in JIT mode, or
for libraries that provide `MyDirective` through NPM. The metadata would
look as followed:
```
let MyDirective = class MyDir {}
MyDirective = __decorate([
Directive(),
__metadata("design:paramtypes", [MyButton]),
], MyDirective);
let MyButton = class MyButton {}
```
Notice that TypeScript generated calls to `__decorate` and
`__metadata`. These calls are needed so that the Angular compiler
is able to determine whether `MyDirective` is actually an directive,
and what types are needed for dependency injection.
The limitation surfaces in this concrete example because `MyButton`
is declared after the `__metadata(..)` call, while `__metadata`
actually directly references `MyButton`. This is illegal though because
`MyButton` has not been declared at this point. This is due to the
so-called temporal dead zone in JavaScript. Errors like followed will
be reported at runtime when such file/code evaluates:
```
Uncaught ReferenceError: Cannot access 'MyButton' before initialization
```
As noted, this is a TypeScript limitation because ideally TypeScript
shouldn't evaluate `__metadata`/reference `MyButton` immediately.
Instead, it should defer the reference until `MyButton` is actually
declared. This limitation will not be fixed by the TypeScript team
though because it's a limitation as per current design and they will
only revisit this once the tc39 decorator proposal is finalized
(currently stage-2 at time of writing).
Given this wontfix on the TypeScript side, and our heavy reliance on
this metadata in libraries (and for JIT mode), we intend to fix this
from within the Angular compiler by downleveling decorators to static
properties that don't need to evaluate directly. For example:
```
MyDirective.ctorParameters = () => [MyButton];
```
With this snippet above, `MyButton` is not referenced directly. Only
lazily when the Angular runtime needs it. This mitigates the temporal
dead zone issue caused by a limitation in TypeScript's decorator
metadata output. See: https://github.com/microsoft/TypeScript/issues/27519.
In the past (as noted; before version 7), the Angular compiler by
default used tsickle that already performed this transformation. We
moved the transformation to the CLI for JIT and `ng-packager`, but now
we realize that we can move this all to a single place in the compiler
so that standalone ngc consumers can benefit too, and that we can
disable tsickle in our Bazel `ngc-wrapped` pipeline (that currently
still relies on tsickle to perform this decorator processing).
This transformation also has another positive side-effect of making
Angular application/library code more compatible with server-side
rendering. In principle, TypeScript would also preserve type information
for decorated class members (similar to how it did that for constructor
parameters) at runtime. This becomes an issue when your application
relies on native DOM globals for decorated class member types. e.g.
```
@Input() panelElement: HTMLElement;
```
Your application code would then reference `HTMLElement` directly
whenever the source file is loaded in NodeJS for SSR. `HTMLElement`
does not exist on the server though, so that will become an invalid
reference. One could work around this by providing global mocks for
these DOM symbols, but that doesn't match up with other places where
dependency injection is used for mocking DOM/browser specific symbols.
More context in this issue: #30586. The TL;DR here is that the Angular
compiler does not care about types for these class members, so it won't
ever reference `HTMLElement` at runtime.
Fixes#30106. Fixes#30586. Fixes#30141.
Resolves FW-2196. Resolves FW-2199.
PR Close#37382
In #29083 a call to `getCompilerFacade` was added to `ApplicationRef` which pulls in a bit of JIT-specific code. Since the code path that calls the function can't be hit for an AOT-compiled app, these changes add an `ngJitMode` guard which will allow for dead code elimination to drop it completely. Testing it out against a new CLI project showed a difference of ~1.2kb.
PR Close#37372
lifecycle hooks api detailed documentation contained links which were pointing to onChanges hook only which is removed, made each hook point towards its deafult page link
PR Close#36557
Previously the comments for these files referenced a path to "packages/core/src/render3/jit/compiler_facade_interface.ts" that does not exist in the current codebase.
This PR corrects the path in these comments.
PR Close#37370
This PR provides a more helpful error than the one currently present:
`el.setAttribute is not a function`. It is not valid to have directives with host bindings
on `ng-template` or `ng-container` nodes. VE would silently ignore this, while Ivy
attempts to set the attribute and throws an error because these are comment nodes
and do not have `setAttribute` functionality.
It is better to throw a helpful error than to silently ignore this because
putting a directive with host binding on an `ng-template` or `ng-container` is most often a mistake.
Developers should be made aware that the host binding will have no effect in these cases.
Note that an error is already thrown in Ivy, as mentioned above, so this
is not a breaking change and can be merged to both master and patch.
Resolves#35994
PR Close#37111
If we detect that an injectable class is inheriting from another injectable, we generate code that looks something like this:
```
const baseFactory = ɵɵgetInheritedFactory(Child);
@Injectable()
class Parent {}
@Injectable()
class Child extends Parent {
static ɵfac = (t) => baseFactory(t || Child)
}
```
This usually works fine, because the `ɵɵgetInheritedFactory` resolves to the factory of `Parent`, but the logic can break down if the `Child` class has a custom decorator. Custom decorators can return a new class that extends the original once, which means that the `ɵɵgetInheritedFactory` call will now resolve to the factory of the `Child`, causing an infinite loop.
These changes fix the issue by changing the inherited factory resolution logic so that it walks up the prototype chain class-by-class, while skipping classes that have the same factory as the class that was passed in.
Fixes#35733.
PR Close#37022
In v9, we started showing a console warning when
instantiating a token that inherited its @Injectable
decorator rather than providing its own. This warning
said that the pattern would become an error in v10.
However, we have decided to wait until at least v11
to throw in this case, so this commit updates the
warning to be less prescriptive about the exact
version when the pattern will no longer be supported.
PR Close#37383
Remove `looseIdentical` implementation and instead use the ES2015 `Object.is` in its place.
They behave exactly the same way except for `+0`/`-0`.
`looseIdentical(+0, -0)` => `true`
`Object.is(+0, -0)` => `false`
Other than the difference noted above, this is not be a breaking change because:
1. `looseIdentical` is a private API
2. ES2015 is listed as a mandatory polyfill in the [browser support
guide](https://angular.io/guide/browser-support#mandatory-polyfills)
3. Also note that `Ivy` already uses `Object.is` in `bindingUpdated`.
PR Close#37191
Previously there was a typo in a comment within the PropDecorator function relating to and justifying the use of Object.defineProperty. This PR clears up the wording that comment
PR Close#37369
Due to an outage with the proxy we rely on for publishing, we need
to temporarily directly publish to NPM using our own angular
credentials again.
PR Close#37378
As of TypeScript 3.9, the tsc emit is not compatible with Closure
Compiler due to
https://github.com/microsoft/TypeScript/pull/32011.
There is some hope that this will be fixed by a solution like the one
proposed in
https://github.com/microsoft/TypeScript/issues/38374 but currently it's
unclear if / when that will
happen.
Since the Closure support has been somewhat already broken, and the
tsickle pass has been a source
of headaches for some time for Angular packages, we are removing it for
now while we rethink our
strategy to make Angular Closure compatible outside of Google.
This change has no effect on our Closure compatibility within Google
which work well because all the
code is compiled from sources and passed through tsickle.
This change only disables the tsickle pass but doesn't remove it.
A follow up PR should either remove all the traces of tscikle or
re-enable the fixed version.
BREAKING CHANGE: Angular npm packages no longer contain jsdoc comments
to support Closure Compiler's advanced optimizations
The support for Closure compiler in Angular packages has been
experimental and broken for quite some
time.
As of TS3.9 Closure is unusable with the JavaScript emit. Please follow
https://github.com/microsoft/TypeScript/issues/38374 for more
information and updates.
If you used Closure compiler with Angular in the past, you will likely
be better off consuming
Angular packages built from sources directly rather than consuming the
version we publish on npm
which is primarily optimized for Webpack/Rollup + Terser build pipeline.
As a temporary workaround you might consider using your current build
pipeline with Closure flag
`--compilation_level=SIMPLE`. This flag will ensure that your build
pipeline produces buildable and
runnable artifacts, at the cost of increased payload size due to
advanced optimizations being disabled.
If you were affected by this change, please help us understand your
needs by leaving a comment on https://github.com/angular/angular/issues/37234.
PR Close#37221
Update docs in the micro benchmarks to include:
* How to run with no turbo inlining
* Where to find the profiles in the DevTools
* Best way to debug benchmarks (using the profile_in_browser rather than --inspect-brk)
PR Close#37140
Tslib version is bound to the TypeScript version used to compile the library. Thus, we shouldn't list `tslib` as a `peerDependencies`. This is because, a user can install libraries which have been compiled with older versions of TypeScript and thus require multiple `tslib` versions to be installed.
Reference: TOOL-1374 and TOOL-1375
Closes: #37188
PR Close#37198
Previously all static styling information (including the ones from component/directive host bindings) would get merged into a single value before it would be written into the `@Input('class'/'style')`. The new behavior specifically excludes host values from the `@Input` bindings.
Fix#35383
PR Close#35889
Dynamic embedded views were conceptually different from inline embedded views, but we have since
removed the inline embedded views so we now only have "embedded views".
See related refactoring work to remove inline embedded views in #34715
and #37073.
PR Close#37117
If one component Parent inherit another component Base like the following:
@Component(...)
class Base {
constructor(@Inject(InjectionToken) injector: Injector) { }
}
@Component(...)
class Parent extends Base {
// no constructor
}
When creating Component Parent, the dependency injection should work on delegating ctors like above.
The code Parent code above will be compiled into something like:
class Parent extends Base {
constructor() {
super(...arguments);
}
}
The angular core isDelegateCtor function will identify the delegation ctor to the base class.
But when the code above is minified (using terser), the minified code will compress the spaces, resulting in something like:
class Parent extends Base{constructor(){super(...arguments)}}
The regex will stop working, since it wasn't aware of this case. So this fix will allow this to work in minified code cases.
PR Close#36962
The _tViewNode field (that was marked as internal) on the ViewRef is not
necessery as a reference to a relevant TView is available as a local
variable.
PR Close#36814
TypeScript 3.9 introduced a breaking change where extends `any` no longer acts as `any`, instead it acts as `unknown`.
With this change we retain the behavior we had with TS 3.8 which is;
When using the `EventEmitter` as a type you must always provide a type;
```ts
let emitter: EventEmitter<string>
```
and when initializing the `EventEmitter` class you can either provide a type or or use the fallback type which is `any`
```ts
const emitter = new EventEmitter(); // EventEmitter<any>
const emitter = new EventEmitte<string>(); // EventEmitter<string>
``
PR Close#36989
The ActiveIndexFlag is no longer needed because we no longer have "inline embedded views".
There is only one type of embedded view so we do not need complex tracking for
inline embedded views.
HAS_TRANSPLANTED_VIEWS now takes the place of the ACTIVE_INDEX slot as a
simple boolean rather than being a shifted flag inside the ACTIVE_INDEX bits.
PR Close#37073
In 420b9be1c1 all style-based sanitization code was
disabled because modern browsers no longer allow for javascript expressions within
CSS. This patch is a follow-up patch which removes all traces of style sanitization
code (both instructions and runtime logic) for the `[style]` and `[style.prop]` bindings.
PR Close#36965
The message can be improved by removing the unneeded ‘the’ (x2).
Before:
Angular is running in the development mode. Call enableProdMode() to enable the production mode.
After:
Angular is running in development mode. Call enableProdMode() to enable production mode.
Closes#36570
PR Close#36571
Prior to this change, the `template` instruction logic was located in the `instructions/container.ts` file alongside embedded view instructions. Since unused embedded view instructions are removed in a previous commit, this commit renames `container.ts` -> `template.ts`, since only template-related instructions were retained.
PR Close#34715
Enables the `ng update` migrations for v10. Status for individual
migrations:
**undecorated-classes-with-di**.
This migration dealt exlusively with inherited constructors and
cases where a derived component was undecorated. In those cases,
the migration added `@Directive()` or copied the inherited decorator
to the derived class.
We don't need to run this migration again because ngtsc throws if
constructor is inherited from an undecorated class. Also ngtsc will
throw if a NgModule references an undecorated class in the declarations.
***undecorated-classes-with-decorated-fields***
This migration exclusively deals with undecorated classes that use
Angular features but are not decorated. Angular features include
the use of lifecycle hooks or class fields with Angular decorators,
such as `@Input()`.
We want to re-run this migration in v10 as we will disable the
compatibility code in ngtsc that detects such undecorated classes
as `@Directive`.
**module-with-providers**:
This migration adds an explicit generic type to `ModuleWithProviders`.
As of v10, the generic type is required, so we need to re-run the
migration again.
**renderer-to-renderer2**:
We don't need to re-run that migration again as the
renderer has been already removed in v9.
**missing-injectable**:
This migration is exclusively concerned with undecorated
providers referenced in an `NgModule`. We should re-run
that migration again as we don't have proper backsliding
prevention for this yet. We can consider adding an error
in ngtsc for v10, or v11. In either way, we should re-run
the migration.
**dynamic-queries**:
We ran this one in v9 to reduce code complexity in projects. Instead
of explicitly passing `static: false`, not passing any object literal
has the same semantics. We don't need to re-run the migration again
since there is no good way to prevent backsliding and we cannot always
run this migration for future versions (as some apps might actually
intentionally use the explicit `static: false` option).
PR Close#36921
As of v10, undecorated classes using Angular features are no longer
supported. In v10, we plan on removing the undecorated classes
compatibility code in ngtsc. This means that old patterns for
undecorated classes will result in compilation errors.
We had a migration for this in v9 already, but it looks like
the migration does not handle cases where classes uses lifecycle
hooks. This is handled in the ngtsc compatibility code, and we
should handle it similarly in migrations too.
This has not been outlined in the migration plan initially,
but an appendix has been added for v10 to the plan document.
https://hackmd.io/vuQfavzfRG6KUCtU7oK_EA?both.
Note: The migration is unable to determine whether a given undecorated
class that only defines `ngOnDestroy` is a directive or an actual
service. This means that in some cases the migration cannot do
more than adding a TODO and printing an failure.
Certainly there are more ways to determine the type of such classes,
but it would involve metadata and NgModule analysis. This is out of
scope for this migration.
PR Close#36921
In v9, we deprecated the use of ModuleWithProviders
without a generic. In v10, we will be requiring the
generic when using ModuleWithProviders. You can read
more about the reasoning behind this change in the
migration guide:
http://v9.angular.io/guide/migration-module-with-providers
PR Close#36892
This patch is the first of many commits to disable sanitization for
[stlye.prop] and [style] bindings in Angular.
Historically, style-based sanitization has only been required for old
IE browsers (IE6 and IE7). Since Angular does not support these old
browsers at all, there is no reason for the framework to support
style-based sanitization.
PR Close#35621
We can remove all of the entry point resolution configuration from the package.json
in our source code as ng_package rule adds the properties automatically and correctly
configures them.
This change simplifies our code base but doesn't have any impact on the package.json
in the distributed npm_packages.
PR Close#36944
The purpose of the `WrappedValue` is to allow same object instance to be treated as different for the purposes of change detection. It is currently used with `async` pipe and only with `Observables`. The use case which it covers is if the `Observable` produces the same instance of the value but it is desirable to still try to mark it as changed for the purposes of change detection.
We believe tha the above use case is too rare to warrant special handling in the framework. (Having special handling causes application slowdown for the users and mental load for the developers.) No replacement is planned for this deprecation.
PR Close#36819
This commit fixes 2 separate issues related to root nodes retrieval from
embedded views with `<ng-content>`:
1) we did not account for the case where there were no projectable nodes
for a given `<ng-content>`;
2) we did not account for the case where projectable nodes for a given
`<ng-content>` were represented as an array of native nodes (happens in
the case of dynamically created components with projectable nodes);
Fixes#35967
PR Close#36051
Previously we were passing a string form of the value to pluralize
to the `getLocalePluralCase()` function that is extracted from the
locale data. But some locales have functions that rely upon this
value being a number not a string.
Now we convert the value to a number before passing it to the
locale data function.
Fixes#36888
PR Close#36901
Changes the Ivy unknown element/property messages from being logged with `console.warn` to `console.error`. This should make them a bit more visible without breaking existing apps. Furthermore, a lot of folks filter out warning messages in the dev tools' console, whereas errors are usually still shown.
BREAKING CHANGE:
Warnings about unknown elements are now logged as errors. This won't break your app, but it may trip up tools that expect nothing to be logged via `console.error`.
Fixes#35699.
PR Close#36399
Only refresh transplanted views at the insertion location in Ivy.
Previously, Ivy would check transplanted views at both the insertion and
declaration points. This is achieved by adding a marker to the insertion
tree when we encounter a transplanted view that needs to be refreshed at
its declaration. We use this marker as an extra indication that we still
need to descend and refresh those transplanted views at their insertion
locations even if the insertion view and/or its parents are not dirty.
This change fixes several issues:
* Transplanted views refreshed twice if both insertion and declaration
are dirty. This could be an error if the insertion component changes
result in data not being available to the transplanted view because it
is slated to be removed.
* CheckAlways transplanted views not refreshed if shielded by
non-dirty OnPush (fixes#35400)
* Transplanted views still refreshed when insertion tree is detached
(fixes#21324)
PR Close#35968
If there's an error during the first creation pass of a `TView`, the data structure may be corrupted which will cause framework assertion failures downstream which can mask the user's error. These changes add a new flag to the `TView` that indicates whether the first creation pass was successful, and if it wasn't we try re-create the `TView`.
Fixes#31221.
PR Close#36381
Prior to this change, animations-related runtime logic assumed that the @HostBinding and @HostListener with synthetic (animations) props are used for Components only. However having @HostBinding and @HostListener with synthetic props on Directives is also supported by View Engine. This commit updates the logic to select correct renderer to execute instructions (current renderer for Directives and sub-component renderer for Components).
This PR resolves#35501.
PR Close#35568
When module overrides (via `TestBed.overrideModule`) are present, it might affect all modules that import (even transitively) an overridden one. For all affected modules we need to recalculate their scopes for a given test run and restore original scopes at the end. Prior to this change, we were recalculating module scopes only for components that are used in a test, without taking into account module hierarchy. This commit updates Ivy TestBed logic to calculate all potentially affected modules are reset cached scopes information for them (so that scopes are recalculated as needed).
Resolves#36619.
PR Close#36649
Prior to this commit unbound attributes were treated as possible inputs to structural directives. Since structural directives can only accepts inputs defined using microsyntax expression (e.g. `<div *dir="exp">`), such unbound attributes should not be considered as inputs. This commit aligns Ivy and View Engine behavior and avoids using unbound attributes as inputs to structural directives.
PR Close#36441
Based on the migration guide, provided classes which don't have
either `@Injectable`, `@Directive`, `@Component` or `@Pipe` need
to be migrated.
This is not correct as provided classes with an `@NgModule` also
have a factory function that can be read by the r3 injector. It's
unclear in which cases the `@NgModule` decorator is used for
provided classes, but this scenario has been reported.
Either we fix this in the migration, or we make sure to report
this as unsupported in the Ivy compiler.
Fixes#35700.
PR Close#36369
The flag that determines whether something should be able to inject from `viewProviders` is opt-out and the pipes weren't opted out, resulting in them being able to see the viewProviders if they're placed on a component host node.
Fixes#36146.
PR Close#36512
Prior to this commit, the unknown property check was unnecessarily invoked for AOT-compiled components (for these components, the check happens at compile time). This commit updates the code to avoid unknown property verification for AOT-compiled components by checking whether schemas information is present (as a way to detect whether this is JIT or AOT compiled component).
Resolves#35945.
PR Close#36072
Prior to this change, there was a problem while matching template attributes, which mistakenly took i18n attributes (that might be present in attrs array after template ones) into account. This commit updates the logic to avoid template attribute matching logic from entering the i18n section and as a result this also allows generating proper i18n attributes sections instead of keeping these attribute in plain form (with their values) in attribute arrays.
PR Close#36422
In certain use-cases it's useful to have an ability to use empty strings as translations. Currently Ivy fails at runtime if empty string is used as a translation, since some parts of internal data structures are not created properly. This commit updates runtime i18n logic to handle empty translations and avoid unnecessary extra processing for such cases.
Fixes#36476.
PR Close#36499
The undecorated-classes-with-decorated-fields migration relies on
the type checker to resolve base classes of individual classes.
It could happen that resolved base classes have no value declaration.
e.g. if they are declared through an interface in the default types.
Currently the migration will throw in such situations because it assumes
that `ts.Symbol#valueDeclaration` is always present. This is not the
case, but we don't get good type-checking here due to a bug in the
TypeScript types. See:
https://github.com/microsoft/TypeScript/issues/24706.
Fixes#36522.
PR Close#36543
1. update jasmine to 3.5
2. update @types/jasmine to 3.5
3. update @types/jasminewd2 to 2.0.8
Also fix several cases, the new jasmine 3 will help to create test cases correctly,
such as in the `jasmine 2.x` version, the following case will pass
```
expect(1 == 2);
```
But in jsamine 3, the case will need to be
```
expect(1 == 2).toBeTrue();
```
PR Close#34625
Currently destroy hooks are stored in memory as `[1, hook, 5, hook]` where
the numbers represent the index at which to find the context and `hook` is
the function to be invoked. This breaks down for `multi` providers,
because the value at the index will be an array of providers, resulting in
the hook being invoked with an array of all the multi provider values,
rather than the provider that was destroyed. In ViewEngine `ngOnDestroy`
wasn't being called for `multi` providers at all.
These changes fix the issue by changing the structure of the destroy hooks to `[1, hook, 5, [0, hook, 3, hook]]` where the indexes inside the inner array point to the provider inside of the multi provider array. Note that this is slightly different from the original design which called for the structure to be `[1, hook, 5, [hook, hook]`, because in the process of implementing it, I realized that we wouldn't get passing the correct context if only some of the `multi` providers have `ngOnDestroy` and others don't.
I've run the newly-added `view_destroy_hooks` benchmark against these changes and compared it to master. The difference seems to be insignificant (between 1% and 2% slower).
Fixes#35231.
PR Close#35840
In rare cases a project with configured `rootDirs` that has imports to
non-existent identifiers could fail in the migration.
This happens because based on the application code, the migration could
end up trying to resolve the `ts.Symbol` of such non-existent
identifiers. This isn't a problem usually, but due to a upstream bug
in the TypeScript compiler, a runtime error is thrown.
This is because TypeScript is unable to compute a relative path from the
originating source file to the imported source file which _should_
provide the non-existent identifier. An issue for this has been reported
upstream: https://github.com/microsoft/TypeScript/issues/37731. The
issue only surfaces since our migrations don't provide an absolute base
path that is used for resolving the root directories.
To fix this, we ensure that we never use relative paths when parsing
tsconfig files. More details can be found in the TS issue.
Fixes#36346.
PR Close#36367
In version 10, undecorated base classes that use Angular features need
to be decorated explicitly with `@Directive()`. Additionally, derived
classes of abstract directives need to be decorated.
The migration already handles this for undecorated classes that are
not explicitly decorated, but since in V9, abstract directives can be
used, we also need to handle this for explicitly decorated abstract
directives. e.g.
```
@Directive()
export class Base {...}
// needs to be decorated by migration when updating from v9 to v10
export class Wrapped extends Base {}
@Component(...)
export class Cmp extends Wrapped {}
```
PR Close#35339
We don't have an integration test for the `undecorated-classes-with-decorated-fields
migration. For consistency and to cover for the latest changes, we add
it to the `ng update` integration test.
PR Close#35339
The `undecorated-classes-with-decorated-fields` migration has been
introduced with 904a2018e0, but misses
logic for decorating derived classes of undecorated classes which use
Angular features. Example scenario:
```ts
export abstract class MyBaseClass {
@Input() someInput = true;
}
export abstract class BaseClassTwo extends MyBaseClass {}
@Component(...)
export class MyButton extends BaseClassTwo {}
```
Both abstract classes would need to be migrated. Previously, the migration
only added `@Directive()` to `MyBaseClass`, but with this change, it
also decorates `BaseClassTwo`.
This is necessary because the Angular Compiler requires `BaseClassTwo` to
have a directive definition when it flattens the directive metadata for
`MyButton` in order to perform type checking. Technically, not decorating
`BaseClassTwo` does not break at runtime.
We basically want to enforce consistent use of `@Directive` to simplify the
mental model. [See the migration guide](https://angular.io/guide/migration-undecorated-classes#migrating-classes-that-use-field-decorators).
Fixes#34376.
PR Close#35339
The import manager has been created for both the `missing-injectable`
and `undecorated-classes-with-di` migration. Both initial PRs brought
in the manager class, so the manager is duplicated in the schematics.
In order to reduce this duplication, and to expose the manager to other
schematics/migrations, we move it into the shared schematic utils.
PR Close#35339
Moves the `findBaseClassDeclarations` method into the shared
schematic utilities. This method will be useful for future
migrations, and for planned changes to the
`undecorated-classes-with-decorated-fields` migration.
PR Close#35339
Prior to this commit, the `packages/core/src/render3/interfaces/query.ts` file used to import `QueryList` using `../../linker`, which contains a lot of re-exports and as a result, this one import caused a lot of circular deps cycles reported by the tool that checks such deps. In other places in the code the `QueryList` is imported using more narrow import (`linker/query_list`), so this commit uses the same pattern. This change allowed to reduce the number of known cycles from 343 to 207, the golden file was updated accordingly.
PR Close#36286
Prior to this commit, Ivy TestBed was accessing locale ID before `APP_INITIALIZER` functions were called. This execution order is not consistent with the app bootstrap logic in `application_ref.ts`. This commit updates Ivy TestBed execution order to call initializers first (since they might affect `LOCALE_ID` token value) and accessing and setting locale ID after that.
Fixes#36230.
PR Close#36237
This commit augments the `FactoryDef` declaration of Angular decorated
classes to contain information about the parameter decorators used in
the constructor. If no constructor is present, or none of the parameters
have any Angular decorators, then this will be represented using the
`null` type. Otherwise, a tuple type is used where the entry at index `i`
corresponds with parameter `i`. Each tuple entry can be one of two types:
1. If the associated parameter does not have any Angular decorators,
the tuple entry will be the `null` type.
2. Otherwise, a type literal is used that may declare at least one of
the following properties:
- "attribute": if `@Attribute` is present. The injected attribute's
name is used as string literal type, or the `unknown` type if the
attribute name is not a string literal.
- "self": if `@Self` is present, always of type `true`.
- "skipSelf": if `@SkipSelf` is present, always of type `true`.
- "host": if `@Host` is present, always of type `true`.
- "optional": if `@Optional` is present, always of type `true`.
A property is only present if the corresponding decorator is used.
Note that the `@Inject` decorator is currently not included, as it's
non-trivial to properly convert the token's value expression to a
type that is valid in a declaration file.
Additionally, the `ComponentDefWithMeta` declaration that is created for
Angular components has been extended to include all selectors on
`ng-content` elements within the component's template.
This additional metadata is useful for tooling such as the Angular
Language Service, as it provides the ability to offer suggestions for
directives/components defined in libraries. At the moment, such
tooling extracts the necessary information from the _metadata.json_
manifest file as generated by ngc, however this metadata representation
is being replaced by the information emitted into the declaration files.
Resolves FW-1870
PR Close#35695
I was not able to reproduce IE 10/11 failrue of the disabled
tests on SauceLabs any more. I did some cleanup of the test
in question but I doubt it was the root cause of the problem.
PR Close#35962
When using `platformBrowserDynamic().bootstrapModule()`, it is possible
to set `defaultEncapsulation` and `preserveWhitespaces` as default
configuration to influence how components are compiled. When compiling
components in JIT with Ivy, these options were not taken into account.
This commit publishes the options to be globally available, so that the
lazy compilation of JIT components has access to the configured
bootstrap options. Note that this approach does not allow changing the
options once they have been set, as Ivy's compilation model does not
allow for multiple compilations to exist at the same time.
For applications that bootstrap multiple modules, it is now required
to provide the exact same bootstrap options. An error is logged if
incompatible bootstrap options are provided, in which case the updated
options will be ignored.
Fixes#35230
Resolved FW-1838
PR Close#35534
This commit performs a few updates to internal functions that would be required in upcoming changes to support synthetic host bindings in Directives.
* the `elementPropertyInternal` function was refactored to accept renderer as an argument (prior to that, there was a function that loads the renderer in some specific way for animation bindings)
* `elementPropertyInternal`, `elementAttributeInternal` and `listenerInternal` functions were updated to have a fixed set of arguments (for better performance)
* `elementPropertyInternal` and `elementAttributeInternal` functions were updated to take `tNode` as an argument instead of passing node index (that was used to retrieve `tNode` internally), in some cases we already have `tNode` available or we can retrieve it from the state
The refactoring was triggered by the need to pass different renderers to the `elementPropertyInternal` to support synthetic host bindings in Directives (see this comment for additional context: https://github.com/angular/angular/pull/35568/files#r388034584).
PR Close#35884
Prior to this commit, Ivy compiler didn't handle directive inputs with interpolations located on `<ng-template>` elements (e.g. `<ng-template dir="{{ field }}">`). That was the case for regular inputs as well as inputs that should be processed via i18n subsystem (e.g. `<ng-template i18n-dir dir="Hello {{ name }}">`). This commit adds support for such expressions for explicit `<ng-template>`s as well as a number of tests to confirm the behavior.
Fixes#35752.
PR Close#35984
Prior to this commit, i18n runtime logic relied on the assumption that provided translation is syntactically correct, specifically around ICU syntax. However provided translations might contain some errors that lead to parsing failure. Specifically when translation contains curly braces, runtime i18n logic tries to parse them as an ICU expression and fails. This commit validates ICU parsing result (making sure it was parsed correctly) and throws an error if parsing error happens. The error that is thrown also contains translated message text for easier debugging.
Note: the check and the error message introduced in this PR is a safeguard against the problem that led to unhandled i18n runtime logic crash. So the framework behavior remains the same, we just improve the error message and it should be safe to merge to the patch branch.
Resolves#35689.
PR Close#35923
ts-api-guardian uses `require.resolve` to resolve the actual and golden files under bazel. In Windows for these files to be resolved correct the full path including the workspace name as per the MANIFEST entries is required.
This used to be the case until the recent changes done to use npm_integration tests
83c74ceacf/tools/public_api_guard/public_api_guard.bzl (L19)83c74ceacf/tools/public_api_guard/public_api_guard.bzl (L28)
```
bazel test //packages/... --test_tag_filters=api_guard
//packages/animations:animations_api (cached) PASSED in 18.4s
//packages/common:common_api (cached) PASSED in 25.5s
//packages/compiler-cli:compiler_options_api (cached) PASSED in 12.4s
//packages/compiler-cli:error_code_api (cached) PASSED in 11.6s
//packages/core:core_api (cached) PASSED in 20.6s
//packages/core:ng_global_utils_api (cached) PASSED in 13.5s
//packages/elements:elements_api (cached) PASSED in 11.9s
//packages/forms:forms_api (cached) PASSED in 13.9s
//packages/http:http_api (cached) PASSED in 14.8s
//packages/localize:localize_api (cached) PASSED in 6.3s
//packages/platform-browser:platform-browser_api (cached) PASSED in 18.1s
//packages/platform-browser-dynamic:platform-browser-dynamic_api (cached) PASSED in 14.0s
//packages/platform-server:platform-server_api (cached) PASSED in 13.9s
//packages/platform-webworker:platform-webworker_api (cached) PASSED in 13.7s
//packages/platform-webworker-dynamic:platform-webworker-dynamic_api (cached) PASSED in 11.7s
//packages/router:router_api (cached) PASSED in 19.9s
//packages/service-worker:service-worker_api (cached) PASSED in 18.1s
//packages/upgrade:upgrade_api (cached) PASSED in 13.5s
```
Reference: DEV-71
PR Close#36034
Moves the public api .d.ts files from tools/public_api_guard to
goldens/public-api.
Additionally, provides a README in the goldens directory and a script
assist in testing the current state of the repo against the goldens as
well as a command for accepting all changes to the goldens in a single
command.
PR Close#35768
Pure pipes are not invoked again until their arguments are modified. The same
rule should apply to pure pipes that throw an exception. This fix ensures that
a pure pipe is not re-invoked if it throws an exception and arguments are not
changed.
PR Close#35827
This commit adds support in the Angular monorepo and in the Angular
compiler(s) for TypeScript 3.8. All packages can now compile with
TS 3.8.
For most of the repo, only a handful few typings adjustments were needed:
* TS 3.8 has a new `CustomElementConstructor` DOM type, which enforces a
zero-argument constructor. The `NgElementConstructor` type previously
declared a required `injector` argument despite the fact that its
implementation allowed `injector` to be optional. The interface type was
updated to reflect the optionality of the argument.
* Certain error messages were changed, and expectations in tests were
updated as a result.
* tsserver (part of language server) now returns performance information in
responses, so test expectations were changed to only assert on the actual
body content of responses.
For compiler-cli and schematics (which use the TypeScript AST) a major
breaking change was the introduction of the export form:
```typescript
export * as foo from 'bar';
```
This is a `ts.NamespaceExport`, and the `exportClause` of a
`ts.ExportDeclaration` can now take this type as well as `ts.NamedExports`.
This broke a lot of places where `exportClause` was assumed to be
`ts.NamedExports`.
For the most part these breakages were in cases where it is not necessary
to handle the new `ts.NamedExports` anyway. ngtsc's design uses the
`ts.TypeChecker` APIs to understand syntax and so automatically supports the
new form of exports.
The View Engine compiler on the other hand extracts TS structures into
metadata.json files, and that format was not designed for namespaced
exports. As a result it will take a nontrivial amount of work if we want to
support such exports in View Engine. For now, these new exports are not
accounted for in metadata.json, and so using them in "folded" Angular
expressions will result in errors (probably claiming that the referenced
exported namespace doesn't exist).
Care was taken to only use TS APIs which are present in 3.7/3.6, as Angular
needs to remain compatible with these for the time being.
This commit does not update angular.io.
PR Close#35864
Prior to this commit, while calculating the scope for a module, Ivy compiler processed `declarations` field first and `imports` after that. That results in a couple issues:
* for Pipes with the same `name` and present in `declarations` and in an imported module, Pipe from imported module was selected. In View Engine the logic is opposite: Pipes from `declarations` field receive higher priority.
* for Directives with the same selector and present in `declarations` and in an imported module, we first invoked the logic of a Directive from `declarations` field and after that - imported Directive logic. In View Engine, it was the opposite and the logic of a Directive from the `declarations` field was invoked last.
In order to align Ivy and View Engine behavior, this commit updates the logic in which we populate module scope: we first process all imports and after that handle `declarations` field. As a result, in Ivy both use-cases listed above work similar to View Engine.
Resolves#35502.
PR Close#35850
The options for `flatModuleId` and `flatModuleOutFile` had been removed in the CLI
from generated libraries with 718ee15b9a.
This has been done because `ng-packagr` (which is used to build the
libraries) automatically set these options in-memory when it compiles the library.
No migration has been created for this because there was no actual need to get rid of
this. Keeping the options in the library `tsconfig` does not cause any problems unless
the `tsconfig` is used outside of `ng-packagr`. This was not anticipated, but is now
commonly done in `ng update` migrations.
The `ng update` migrations try to create an instance of the `AngularCompilerProgram` by
simply parsing the `tsconfig`. The migrations make the valid assumption that `tsconfig` files
are not incomplete/invalid. They _definitely_ are in the file system though. It just works for
libraries because `ng-packagr` in-memory completes the invalid `tsconfig` files, so that they
can be passed to the `@angular/compiler-cli`.
We can't have this logic in the `ng update` migrations because it's
out-of-scope for individual migrations to distinguish between libraries
and applications. Also it would be out-of-scope to parse the
`ng-packagr` configuration and handle the tsconfig in-memory completion.
As a workaround though, we can remove the flat-module bundle options
in-memory when creating the compiler program. This is acceptable since
we don't emit the program and the flat module bundles are not needed.
Fixes#34985.
PR Close#35824
This reverts commit 00f3c58bb9.
Rolling back because it could be breaking e2e tests that assert that
there are no errors in the console after the assertions have run. We can
re-add this in v10.
PR Close#35845
Changes the Ivy unknown element/property messages from being logged with `console.warn` to `console.error`. This should make them a bit more visible without breaking existing apps. Furthermore, a lot of folks filter out warning messages in the dev tools' console, whereas errors are usually still shown.
Fixes#35699.
PR Close#35798
This is a follow up to #35637 which resolved a similar issue for `ComponentFactoryResolver`, but not the root cause. When a `NgModuleRef` is created, it instantiates an `Injector` internally which in turn resolves all of injector types. This can result in a circular call that results in an error, because the module is one of the injector types being resolved.
These changes work around the issue by allowing the constructor to run before resolving the injector types.
Fixes#35677.
Fixes#35639.
PR Close#35731
Switches our tslint setup to the standard `tslint.json` linter excludes.
The set of files that need to be linted is specified through a Yarn script.
For IDEs, open files are linted with the closest tslint configuration, if the
tslint IDE extension is set up, and the source file is not excluded.
We cannot use the language service plugin for tslint as we have multiple nested
tsconfig files, and we don't want to add the plugin to each tsconfig. We
could reduce that bloat by just extending from a top-level tsconfig that
defines the language service plugin, but unfortunately the tslint plugin does
not allow the use of tslint configs which are not part of the tsconfig project.
This is problematic since the tslint configuration is at the project root, and we
don't want to copy tslint configurations next to each tsconfig file.
Additionally, linting of `d.ts` files has been re-enabled. This has been
disabled in the past and a TODO has been left. This commit fixes the
lint issues and re-enables linting.
PR Close#35800
`ɵɵgetInheritedFactory()` is called from generated code for a component which extends another class. This function is detected by Closure to have a side effect and is not able to tree shake the component as a result. Marking it with `noSideEffects()` tells Closure it can remove this function under the relevant tree shaking conditions.
PR Close#35769
`ɵɵNgOnChangesFeature()` would set `ngInherit`, which is a side effect and also not necessary. This was pulled out to module scope so the function itself can be pure. Since it only curries another function, the call is entirely unnecessary. Updated the compiler to only generate a reference to this function, rather than a call to it, and removed the extra curry indirection.
PR Close#35769
This marks the function are "pure" and eligible to be tree shaken by Closure. Without this, initializing `ngDevMode` is considered a side effect which prevents this function from being tree shaken and also any component which calls it.
PR Close#35769
This is useful for propagating return values without them being converted to a string. It still provides the same guarantees to Closure, which will assume that the function invoked is pure and can be tree-shaken accordingly.
PR Close#35769
Before this change ngIvy implementation of queries would throw upon
encountering null / undefined query result collected from an embedded
view. It turns out that we might have a provider that explicitly provides
a null / undefined value in a place of a token queried for.
This commit removes a check from the ngIvy query implementation that was
asserting on a query result to be defined.
Fixes#35673
PR Close#35796
Before this change `[class]` and `[className]` were both converted into `ɵɵclassMap`. The implication of this is that at runtime we could not differentiate between the two and as a result we treated `@Input('class')` and `@Input('className)` as equivalent.
This change makes `[class]` and `[className]` distinct. The implication of this is that `[class]` becomes `ɵɵclassMap` instruction but `[className]` becomes `ɵɵproperty' instruction. This means that `[className]` will no longer participate in styling and will overwrite the DOM `class` value.
Fix#35577
PR Close#35668
Prior to this commit, i18n attributes defined on `<ng-template>` tags were not processed by the compiler. This commit adds the necessary logic to handle i18n attributes in the same way how these attrs are processed for regular elements.
PR Close#35681
This commit updates the host bindings micro benchmark to run tests with mutliple directives (where each directive contains host bindings). The number of directives is configurable as a constant in the micro benchmark file. This change is needed to have an ability to measure/compare perf in different scenarios.
PR Close#35736
This commit extends the range of tNode types that may have local refs to include `TNodeType.Container` to account for `<ng-template>`s. Original changes in https://github.com/angular/angular/pull/33415 didn't include that type and as a result, an error is thrown at runtime in case an i18n block contains an `<ng-template>` with local refs.
PR Close#35758
Prior to this change, the logic that compiles Injectable in JIT mode used incorrect configuration that triggers a problem when `ChangeDetectorRef` is used as a dependency. This commit updates the logic to generate correct inject instruction to add the `ChangeDetectorRef` dependency in case it's requested in @Injectable class.
PR Close#35706
This commit adds micro benchmark for host bindings, so that we can assess the impact of changes related to host bindings (for example PR #35568).
PR Close#35705
If an injectable has a `useClass`, Ivy injects the token in `useClass`, rather than the original injectable, if the injectable is re-provided under a different token. The correct behavior is that it should inject the re-provided token, no matter whether it has `useClass`.
Fixes#34110.
PR Close#34574
When binding to `[style]` we correctly sanitized/unwrapped properties but we did not do it for the object itself.
```
@HostBinding("style")
style: SafeStyle = this.sanitizer.bypassSecurityTrustStyle(
"background: red; color: white; display: block;"
);
```
Above code would fail since the `[style]` would not unwrap the `SafeValue` and would treat it as object resulting in incorrect behavior.
Fix#35476 (FW-1875)
PR Close#35564
Currently we resolve the `NgModuleRef.componentFactoryResolver` by going through the injector, but the problem is that `ComponentFactoryResolver` has a dependency on `NgModuleRef`, which means that if the module that's attached to the ref tries to inject `ComponentFactoryResolver` in its constructor, we'll create a circular dependency which throws at runtime.
These changes resolve the issue by creating the `ComponentFactoryResolver` manually ahead of time without going through the injector. We can do this safely, because the only dependency for the resolver is the current module ref which is providing it.
Aside from fixing the issue, another advantage to this approach is that it should reduce the amount of generated JS, because it removes a getter and a provider definitio.
Fixes#35580.
PR Close#35637
Currently if TestBed detects that TestBed.overrideModule was used for module X, transitive scopes are recalculated recursively for all modules that X imports and previously calculated data (stored in cache) is ignored. This behavior was introduced in https://github.com/angular/angular/pull/33787 to fix stale transitive scopes issue (cache was not updated if module overrides are present).
The perf issue comes from a "diamond" problem, where module X is overridden which imports modules A and B, which both import module C. Under previous logic, module C gets its transitive deps recomputed multiple times, during the recompute for both A and B. For deep graphs and big common/shared modules this can be super costly.
This commit updates the logic to recalculate ransitive scopes for the overridden module, while keeping previously calculated scopes of other modules untouched.
PR Close#35454
* it's tricky to get out of the runfiles tree with `bazel test` as `BUILD_WORKSPACE_DIRECTORY` is not set but I employed a trick to read the `DO_NOT_BUILD_HERE` file that is one level up from `execroot` and that contains the workspace directory. This is experimental and if `bazel test //:test.debug` fails than `bazel run` is still guaranteed to work as `BUILD_WORKSPACE_DIRECTORY` will be set in that context
* test //integration:bazel_test and //integration:bazel-schematics_test exclusively
* run "exclusive" and "manual" bazel-in-bazel integration tests in their own CI job as they take 8m+ to execute
```
//integration:bazel-schematics_test PASSED in 317.2s
//integration:bazel_test PASSED in 167.8s
```
* Skip all integration tests that are now handled by angular_integration_test except the tests that are tracked for payload size; these are:
- cli-hello-world*
- hello_world__closure
* add & pin @babel deps as newer versions of babel break //packages/localize/src/tools/test:test
@babel/core dep had to be pinned to 7.6.4 or else //packages/localize/src/tools/test:test failed. Also //packages/localize uses @babel/generator, @babel/template, @babel/traverse & @babel/types so these deps were added to package.json as they were not being hoisted anymore from @babel/core transitive.
NB: integration/hello_world__systemjs_umd test must run with systemjs 0.20.0
NB: systemjs must be at 0.18.10 for legacy saucelabs job to pass
NB: With Bazel 2.0, the glob for the files to test `"integration/bazel/**"` is empty if integation/bazel is in .bazelignore. This glob worked under these conditions with 1.1.0. I did not bother testing with 1.2.x as not having integration/bazel in .bazelignore is correct.
PR Close#33927
When a pipe inherits its constructor, and as a result its factory, from an injectable in AOT mode, it can end up throwing an error, because the inject implementation hasn't been set yet. These changes ensure that the implementation is set before the pipe's factory is invoked.
Note that this isn't a problem in JIT mode, because the factory inheritance works slightly differently, hence why this test isn't going through `TestBed`.
Fixes#35277.
PR Close#35468
In #33705 we made it so that we generate pure functions for object/array literals in order to avoid having them be shared across elements/views. The problem this introduced is that further down the line the `ContantPool` uses the generated literal in order to figure out whether to share an existing factory or to create a new one. `ConstantPool` determines whether to share a factory by creating a key from the AST node and using it to look it up in the factory cache, however the key generation function didn't handle function invocations and replaced them with `null`. This means that the key for `{foo: pureFunction0(...)}` and `{foo: null}` are the same.
These changes rework the logic so that instead of generating a `null` key
for function invocations, we generate a variable called `<unknown>` which
shouldn't be able to collide with anything.
Fixes#35298.
PR Close#35481
In View Engine, host element of dynamically created component received attributes and classes extracted from component's selector. For example, if component selector is `[attr] .class`, the `attr` attribute and `.class` class will be add to host element. This commit adds similar logic to Ivy, to make sure this behavior is aligned with View Engine.
PR Close#34481
Before this change content queries with the `descendants: false` option, as implemented in ivy,
would not descendinto `<ng-container>` elements. This behaviour was different from the way the
View Engine worked. This change alligns ngIvy and VE behaviours when it comes to queries and the
`<ng-container>` elements and fixes a common bugs where a query target was placed inside the
`<ng-container>` element with a * directive on it.
Before:
```html
<needs-target>
<ng-container *ngIf="condition">
<div #target>...</div> <!-- this node would NOT match -->
</ng-container>
</needs-target>
```
After:
```html
<needs-target>
<ng-container *ngIf="condition">
<div #target>...</div> <!-- this node WILL match -->
</ng-container>
</needs-target>
```
Fixes#34768
PR Close#35384
When the same provider is resolved multiple times on the same node, the first invocation had the correct context, but all subsequent ones were incorrect because we were registering the hook multiple times under different indexes in `destroyHooks`.
Fixes#35167.
PR Close#35249
Currently the logic that handles ICUs located outside of i18n blocks may throw exceptions at runtime. The problem is caused by the fact that we store incorrect TNode index for previous TNode (index that includes HEADER_OFFSET) and do not store a flag whether this TNode is a parent or a sibling node. As a result, the logic that assembles the final output uses incorrect TNodes and in some cases throws exceptions (when incompatible structure is extracted from tView.data due to the incorrect index). This commit adjusts the index and captures whether TNode is a parent to make sure underlying logic manipulates correct TNode.
PR Close#35347
Given:
```
<div class="s1" [class]="null" [ngClass]="exp">
```
Notice that `[class]` binding is not a `string`. As a result the existing logic would not concatenate `[class]` with `class="s1"`. The resulting falsy value would than be sent to `ngClass` which would promptly clear all styles on the `<div>`
The new logic correctly handles falsy values for `[class]` bindings.
Fix#35335
PR Close#35350
Root cause is that for perf reasons we cache `LFrame` so that we don't have to allocate it all the time. To be extra fast we clear the `LFrame` on `enterView()` rather that on `leaveView()`. The implication of this strategy is that the deepest `LFrame` will retain objects until the `LFrame` allocation depth matches the deepest object.
The fix is to simply clear the `LFrame` on `leaveView()` rather then on `enterView()`
Fix#35148
PR Close#35156
In the `loadRenderer` we make an assumption that the value will always be an `LView`, but if there's a directive on the same node which injects `ViewContainerRef` the `LView` will be wrapped in an `LContainer`. These changes add a call to unwrap the value before we try to read the value off of it.
Fixes#35342.
PR Close#35343
Prior to this change, element namespace was not set for host elements of dynamically created components that resulted in incorrect rendering in a browser. This commit adds the logic to pick and set correct namespace for host element when component is created dynamically.
PR Close#35136
- Adds `TView` into `LFrame`, read the `TView` from `LView` on `enterView`.
- Before this change the `TView` was ofter looked up from `LView` as `lView[TVIEW]`. This is suboptimal since reading from an Array, requires that the read checks array size before the read. This means that such a read has a much higher cost than reading from the property directly. By passing in the `TView` explicitly it makes the code more explicit and faster.
- Some rearrangements of arguments so that `TView` would come before `LView` for consistency.
PR Close#35069
Inside `*ngFor` the second run of the styling instructions can get into situation where it tries to read a value from a binding which has not yet executed. As a result the read is `NO_CHANGE` value and subsequent property read cause an exception as it is of wrong type.
Fix#35118
PR Close#35133
`TNode.directives` was introduced in https://github.com/angular/angular/pull/34938. Turns out that it is unnecessary because the information is already present it `TData` when combining with `TNode.directiveStart` and `TNode.directiveEnd`
Mainly this is true (conceptually):
```
expect(tNode.directives).toEqual(
tData.slice(
tNode.directivesStart,
tNode.directivesEnd - tNode.DirectivesStart -1
)
);
```
The refactoring removes `TNode.directives` and adds `TNode.directiveStyling` as we still need to keep location in the directive in `TNode`
PR Close#35050
These tests are used for perf testing and don't run as part of CI, as a result they bit-rotted. This fixes that. Long term these tests should be run as part of CI.
PR Close#35071
This change changes the priority order of static styling.
Current priority:
```
(least priority)
- Static
- Component
- Directives
- Template
- Dynamic Binding
- Component
- Map/Interpolation
- Property
- Directives
- Map/Interpolation
- Property
- Template
- Map/Interpolation
- Property
(highest priority)
```
The issue with the above priority is this use case:
```
<div style="color: red;" directive-which-sets-color-blue>
```
In the above case the directive will win and the resulting color will be `blue`. However a small change of adding interpolation to the example like so. (Style interpolation is coming in https://github.com/angular/angular/pull/34202)
```
<div style="color: red; width: {{exp}}px" directive-which-sets-color-blue>
```
Changes the priority from static binding to interpolated binding which means now the resulting color is `red`. It is very surprising that adding an unrelated interpolation and style can change the `color` which was not changed. To fix that we need to make sure that the static values are associated with priority of the source (directive or template) where they were declared. The new resulting priority is:
```
(least priority)
- Component
- Static
- Map/Interpolation
- Property
- Directives
- Static
- Map/Interpolation
- Property
- Template
- Static
- Map/Interpolation
- Property
(highest priority)
```
PR Close#34938
The current logic pulls multiproviders up to the parent module's
provider list. The result is that the multi provider being defined both in
the imported ModuleWithProviders and the parent and getting an extra
item in the multi provided array of values. This PR fixes that problem
by not pulling providers in ModuleWithProviders up to the parent module.
PR Close#34914
There are different `DebugNode`/`DebugElement` implementations (and
associated helper functions) for ViewEngine and Ivy. Additionally, these
classes/functions, which are defined inside the `core` package, are
imported by the `platform-browser` package.
Previously, this code was not tree-shaken as expected in Ivy. #30130
partially addressed the issue, but only for the case where `core` and
`platform-browser` end up in the same closure after webpack's scope
hoisting. In cases where this is not the case, our webpack/terser based
tooling is not capable of tree-shaking it.
This commit fixes the problem, by ensuring that the code retained in Ivy
mode (due to the cross-package import) does not unnecessarily reference
`DebugNode`/`DebugElement`, allowing the code to be tree-shaken away.
This results in a 7.6KB reduction in the size of the main angular.io
bundle.
Jira issue: [FW-1802](https://angular-team.atlassian.net/browse/FW-1802)
PR Close#35003
We had some logic for generating and passing in the `elIndex` parameter into the `hostBindings` function, but it wasn't actually being used for anything. The only place left that had a reference to it was the `StylingBuilder` and it only stored it without referencing it again.
PR Close#34969
Previously we would write to class/style as strings `element.className` and `element.style.cssText`. Turns out that approach is good for initial render but not good for updates. Updates using this approach are problematic because we have to check to see if there was an out of bound write to style and than perform reconciliation. This also requires the browser to bring up CSS parser which is expensive.
Another problem with old approach is that we had to queue the DOM writes and flush them twice. Once on element advance instruction and once in `hostBindings`. The double flushing is expensive but it also means that a directive can observe that styles are not yet written (they are written after directive executes.)
The new approach uses `element.classList.add/remove` and `element.style.setProperty/removeProperty` API for updates only (it continues to use `element.className` and `element.style.cssText` for initial render as it is cheaper.) The other change is that the styling changes are applied immediately (no queueing). This means that it is the instruction which computes priority. In some circumstances it may result in intermediate writes which are than overwritten with new value. (This should be rare)
Overall this change deletes most of the previous code and replaces it with new simplified implement. The simplification results in code savings.
PR Close#34804
This change introduces several functions for manipulating items in an array in an efficient (binary search) way.
- `arraySplice` a faster version of `Array.splice()`.
- `arrayInsert` a faster version of `Array.splice(index, 0, value)`.
- `arrayInsert2` a faster version of `Array.splice(index, 0, value1, value2)`.
- `arrayInsertSorted` a way to insert a value into sorted list.
- `arrayRemoveSorted` a way to remove a value from a sorted list.
- `arrayIndexOfSorted` a way to find a value in a sorted list.
- `ArrayMap` Efficient implementation of `Map` as an `Array`.
- `arrayMapSet`, `arrayMapGet`, `arrayMapIndexOf`, and `arrayMapDelete` for manipulating `ArrayMap`s.
PR Close#34804
NOTE: This change must be reverted with previous deletes so that it code remains in build-able state.
This change deletes old styling code and replaces it with a simplified styling algorithm.
The mental model for the new algorithm is:
- Create a linked list of styling bindings in the order of priority. All styling bindings ere executed in compiled order and than a linked list of bindings is created in priority order.
- Flush the style bindings at the end of `advance()` instruction. This implies that there are two flush events. One at the end of template `advance` instruction in the template. Second one at the end of `hostBindings` `advance` instruction when processing host bindings (if any).
- Each binding instructions effectively updates the string to represent the string at that location. Because most of the bindings are additive, this is a cheap strategy in most cases. In rare cases the strategy requires removing tokens from the styling up to this point. (We expect that to be rare case)S Because, the bindings are presorted in the order of priority, it is safe to resume the processing of the concatenated string from the last change binding.
PR Close#34616
NOTE: This change deletes code and creates a BROKEN SHA. If reverting this SHA needs to be reverted with the next SHA to get back into a valid state.
PR Close#34616
This change reverts https://github.com/angular/angular/pull/28711
NOTE: This change deletes code and creates a BROKEN SHA. If reverting this SHA needs to be reverted with the next SHA to get back into a valid state.
The change removes the fact that `NgStyle`/`NgClass` is special and colaborates with the `[style]`/`[class]` to merge its styles. By reverting to old behavior we have better backwards compatiblity since it is no longer treated special and simply overwrites the styles (same as VE)
PR Close#34616
The `computeStaticStyling` will be used for computing static styling value during `firstCreatePass`.
The function takes into account static styling from the template as well as from the host bindings. The host bindings need to be merged in front of the template so that they have the correct priority.
PR Closes#34418
Parsing styling is now simplified to be used like so:
```
for (let i = parseStyle(text); i <= 0; i = parseStyleNext(text, i)) {
const key = getLastParsedKey();
const value = getLastParsedValue();
...
}
```
This change makes it easier to invoke the parser from other locations in the system without paying the cost of creating and iterating over `Map` of styles.
PR Closes#34418
This change moves information from instructions to declarative position:
- `ɵɵallocHostVars(vars)` => `DirectiveDef.hostVars`
- `ɵɵelementHostAttrs(attrs)` => `DirectiveDef.hostAttrs`
When merging directives it is necessary to know about `hostVars` and `hostAttrs`. Before this change the information was stored in the `hostBindings` function. This was problematic, because in order to get to the information the `hostBindings` would have to be executed. In order for `hostBindings` to be executed the directives would have to be instantiated. This means that the directive instantiation would happen before we had knowledge about the `hostAttrs` and as a result the directive could observe in the constructor that not all of the `hostAttrs` have been applied. This further complicates the runtime as we have to apply `hostAttrs` in parts over many invocations.
`ɵɵallocHostVars` was unnecessarily complicated because it would have to update the `LView` (and Blueprint) while existing directives are already executing. By moving it out of `hostBindings` function we can access it statically and we can create correct `LView` (and Blueprint) in a single pass.
This change only changes how the instructions are generated, but does not change the runtime much. (We cheat by emulating the old behavior by calling `ɵɵallocHostVars` and `ɵɵelementHostAttrs`) Subsequent change will refactor the runtime to take advantage of the static information.
PR Close#34683
This adds `insertTStyleValue` but does not hook it up to anything yet.
The purpose of this function is to create a linked-list of styling
related bindings. The bindings can be traversed during flush.
The linked list also keeps track of duplicates. This is important
for binding to know if it needs to check other styles for reconciliation.
PR Close#34004
This change introduces class/style reconciliation algorithm for DOM elements.
NOTE: The code is not yet hooked up, it will be used by future style algorithm.
Background:
Styling algorithm currently has [two paths](https://hackmd.io/@5zDGNGArSxiHhgvxRGrg-g/rycZk3N5S)
when computing how the style should be rendered.
1. A direct path which concatenates styling and uses `elemnent.className`/`element.style.cssText` and
2. A merge path which uses internal data structures and uses `element.classList.add/remove`/`element.style[property]`.
The situation is confusing and hard to follow/maintain. So a future PR will remove the merge-path and do everything with
direct-path. This however breaks when some other code adds class or style to the element without Angular's knowledge.
If this happens instead of switching from direct-path to merge-path algorithm, this change provides a different mental model
whereby we always do `direct-path` but the code which writes to the DOM detects the situation and reconciles the out of bound write.
The reconciliation process is as follows:
1. Detect that no one has modified `className`/`cssText` and if so just write directly (fast path).
2. If out of bounds write did occur, switch from writing using `className`/`cssText` to `element.classList.add/remove`/`element.style[property]`.
This does require that the write function computes the difference between the previous Angular expected state and current Angular state.
(This requires a parser. The advantage of having a parser is that we can support `style="width: {{exp}}px" kind of bindings.`)
Compute the diff and apply it in non destructive way using `element.classList.add/remove`/`element.style[property]`
Properties of approach:
- If no out of bounds style modification:
- Very fast code path: Just concatenate string in right order and write them to DOM.
- Class list order is preserved
- If out of bounds style modification detected:
- Penalty for parsing
- Switch to non destructive modification: `element.classList.add/remove`/`element.style[property]`
- Switch to alphabetical way of setting classes.
PR Close#34004
Fixes Ivy detecting changes inside child embedded views, even though they're detached.
Note that there's on subtlety here: I made the changes inside `refreshDynamicEmbeddedViews` rather than `refreshView`, because we support detecting changes on a detached view (evidenced by a couple of unit tests), but only if it's triggered directly from the view's `ChangeDetectorRef`, however we shouldn't be detecting changes in the detached child view when something happens in the parent.
Fixes#34816.
PR Close#34846
It was previously defined in core without being exposed publicly, whereas `getLocaleCurrencyName` and `getLocaleCurrencySymbol` were defined in common, and publicly exposed.
This commit now privately exposes `ɵgetLocaleCurrencyCode` from core, and reexports it publicly from common.
PR Close#34810
by DebugElement.triggerEventHandler. ZoneJS tracks the eventListeners on
a node but we need to be able to differentiate between those added by
Angular and those that were added outside the Angular context. This fix
aligns with the behavior that was present in View Engine (not calling
those listeners). If we decide later that we want to call those
listeners, we still need a way to differentiate between those that
we have wrapped in dom_renderer and those that were not (because they
were added outside the Angular context).
PR Close#34514
Fixes Ivy throwing an error when trying to access the `DebugNode.classes` of an SVG element. The problem is that the `className` of an SVG element is an `SVGAnimatedString`, rather than a plain string.
Fixes#34868.
PR Close#34872
This patch removes the need for the styleSanitizer() instruction in
favor of passing the sanitizer into directly into the styleProp
instruction.
This patch also increases the binding index size for all style/class bindings in preparation for #34418
PR Close#34480
In #28162 we introduced an extra `removeNode` call for host elements which can cause the parent element to be removed before all child animations have finished. The issue is only in Ivy, because that the only place where we pass in the `isHostElement` flag. These changes fix the issue by not re-triggering the removal logic if the element has in-progress animations.
Fixes#33597.
PR Close#34702
Before ivy it was possible to configure a mutable service value
in an application initializer (by providing an `APP_INITIALIZER`)
that could be read in the provider of `LOCALE_ID`. This is a common
scenario if you wanted to load the locale id asynchronously from
an HTTP request for instance.
When using the ivy, the runtime needs to be told what the current
locale is, which is done by calling the `setLocaleId()` function with
the value injected by the `LOCALE_ID` token. Previously this was
being done before the application initializers were run, which meant
that the `LOCALE_ID` provider was being executed before the
app initializers had a chance to get a new value for it.
Now this initalization of the locale for the ivy runtime is done after the
application initializers have been run.
Closes#34701
PR Close#34830
remove unnecessary underscore suffix and the corresponding TODO comments,
because the rollup bug was fixed: github.com/rollup/rollup/issues/2047
PR Close#34757
Typescript 3.7 now emits d.ts files for getters differently than prior versions,
and there seems to be a bug in how it strips private types without replacing them
with explicit 'any' type. This then leads to compilation failures in projects compiled
against our packages that don't have skipLibCheck turned on but do have strict or
noImplicitAny check on.
I'm working around this by marking the affected getters as @internal and
adding a test to prevent future regressions.
I believe this is a TypeScript bug, and I filed a bug report:
https://github.com/microsoft/TypeScript/issues/36216
PR Close#34798
This brings in a few minor fixes including a better way to patch require for bootstrap scripts
Also remove install_source_map_support attribute from nodejs_binary targets This attribute will be removed from nodejs_binary in the future
PR Close#34736
The major one that affects the angular repo is the removal of the bootstrap attribute in nodejs_binary, nodejs_test and jasmine_node_test in favor of using templated_args --node_options=--require=/path/to/script. The side-effect of this is that the bootstrap script does not get the require.resolve patches with explicitly loading the targets _loader.js file.
PR Close#34736
Currently ngtsc looks for the first `ConstructorDeclaration` when figuring out what the parameters are so that it can generate the DI instructions. The problem is that if a constructor has overloads, it'll have several `ConstructorDeclaration` members with a different number of parameters. These changes tweak the logic so it looks for the constructor implementation.
PR Close#34590
DebugElement.query also matches elements that may have been created
outside of Angular (ex: with `document.appendChild`). If those matched
DebugElements are in turn used to query for more elements, an error
occurs because the first step in queryAll is to load the LContext.
PR Close#34687
Default currency code in CurrencyPipe is currently hardcoded to USD
and is not configurable. This commit allows the default currency code
to be configurable by adding a DEFAULT_CURRENCY_CODE injection token.
Example:
```
providers: [{ provide: DEFAULT_CURRENCY_CODE, useValue: "GBP" }]
...
{{ 123.45 | currency }} // outputs £123.45 as opposed to always $123.45 before
```
Closes: #25461
PR Close#32584
Unlike in View Engine, we currently reset the dirty state of
components in the check no changes change detection cycle.
This means that components cannot be marked as dirty from
view lifecycle hooks because the dirty state is reset and
the lifecycle hooks do not run in the check no changes CD cycle.
PR Close#34495
The major one that affects the angular repo is the removal of the bootstrap attribute in nodejs_binary, nodejs_test and jasmine_node_test in favor of using templated_args --node_options=--require=/path/to/script. The side-effect of this is that the bootstrap script does not get the require.resolve patches with explicitly loading the targets _loader.js file.
PR Close#34589
A while ago we made a pass through all instructions to make sure that none of them call directly into other instructions, however it seems like missed the `pipeBind*` since they still call into the pure functions. The result is that we have some unnecessary duplicated accesses of global state like `getLView` which are called twice in a row with nothing changing.
These changes move the common functionality into a shared file and make the pipe instructions call into them with the global state instead.
PR Close#33714
This commit improves `ExpressionChangedAfterChecked` error message for attributes by including attribute name and the content of the entire expression that contains interpolation(s). In order to achieve that, metadata is now stored in `TData` array when `attribute` and `attributeInterpolate` instructions are being called (similar to `property` and `propertyInterpolate` instructions).
PR Close#34505
Fixes classes with trailing or leading space that are passed to `ngClass` (e.g. `{'foo ': bar}`) not being applied in Ivy. The issue comes from the fact that when the styling differ builds up the style map it uses the trimmed key to look up the value in the map that uses non-trimmed keys.
Fixes#34476.
PR Close#34539
Follow-up from [this discussion](https://github.com/angular/angular/pull/33419#discussion_r339296216). In Ivy we don't use the schema to validate tag names, but instead we use feature detection to figure out whether an element is supported. While this should generally be more accurate, it'll also end up throwing for some more innocent cases. E.g. now Ivy throws an error for `main` elements in IE which is accurate since IE doesn't support the element, but is annoying since there is no functionality attached.
These changes switch to logging a warning instead, similarly to what we're doing for unknown properties.
PR Close#34524
The `getProjectAsAttrValue` in `node_selector_matcher` finds the
ProjectAs marker and then additionally checks that the marker appears in
an even index of the node attributes because "attribute names are stored
at even indexes". This is true for "regular" attribute bindings but
classes, styles, bindings, templates, and i18n do not necessarily follow
this rule because there can be an uneven number of them, causing the
next "special" attribute "name" to appear at an odd index. To address
this issue, ensure ngProjectAs is placed right after "regular"
attributes.
PR Close#34617
Prior to this commit, there were no `advance` instructions generated before `i18nExp` instructions and as a result, lifecycle hooks for components used inside i18n blocks were flushed too late. This commit adds the logic to generate `advance` instructions in front of `i18nExp` ones (similar to what we have in other places like interpolations, property bindings, etc), so that the necessary lifecycle hooks are flushed before expression value is captured.
PR Close#34436
The main logic of the `InheritDefinitionFeature` is to go through the prototype chain of a given Component and merge all Angular-specific information onto that Component def. The problem happens in case there is a Component in a hierarchy that also contains the `InheritDefinitionFeature` (i.e. it extends some other Component), so it inherits all Angular-specific information from its super class. As a result, the root Component may end up having duplicate information inherited from different Components in hierarchy.
Let's consider the following structure: `GrandChild` extends `Child` that extends `Base` and the `Base` class has a `HostListener`. In this scenario `GrandChild` and `Child` will have `InheritDefinitionFeature` included into the `features` list. The processing will happend in the following order:
- `Child` inherits `HostListener` from the `Base` class
- `GrandChild` inherits `HostListener` from the `Child` class
- since `Child` has a parent, `GrandChild` also inherits from the `Base` class
The result is that the `GrandChild` def has duplicated host listener, which is not correct.
This commit introduces additional logic that checks whether we came across a def that has `InheritDefinitionFeature` feature (which means that this def already inherited information from its super classes). If that's the case, we skip further fields-related inheritance logic, but keep going though the prototype chain to look for super classes that contain other features (like NgOnChanges), that we need to invoke for a given Component def.
PR Close#34244
Fixes an error that is thrown when a provider is overridden in `TestBed`, if the module definition of one of the imported modules uses a function for the `imports` that is set via `setNgModuleScope`. The problem was that we have a `for...of` loop that assumes that the imports are an array, but they can also be a function. This was handled correctly in other places, but this one was missed.
Note that the above-mentioned error is only thrown at runtime when the code is transpiled to es6. In es5 TS generates a call to a helper that handles the error silently so the attached unit test only fails in es6.
Fixes#34623.
PR Close#34629
Prior to this change, the ExpressionChangedAfterChecked error thrown in Ivy was missing useful information that was available in View Engine, specifically: missing property name for proprty bindings and also the content of the entire property interpolation (only a changed value was displayed) if one of expressions was changed unexpectedly. This commit improves the error message by including the mentioned information into the error text.
PR Close#34381
The ordering matters because we don't currently throw if multiple
configurations are provided (i.e. provider has *both* useExisting and
useFactory). We should actually throw an error in this case, but to
avoid another breaking change in v9, this PR simply aligns the Ivy
behavior with ViewEngine.
PR Close#34433
Currently we only run Saucelabs on PRs using the legacy View Engine
build. Switching that build to Ivy is not trivial and there are various
options:
1. Updating the R3 switches to use POST_R3 by default. At first glance,
this doesn't look easy because the current ngtsc switch logic seems to
be unidirectional (only PRE_R3 to POST_R3).
2. Updating the legacy setup to run with Ivy. This sounds like the easiest
solution at first.. but it turns out to be way more complicated. Packages
would need to be built with ngtsc using legacy tools (i.e. first building
the compiler-cli; and then building packages) and View Engine only tests
would need to be determined and filtered out. Basically it will result in
re-auditing all test targets. This is contradictory to the fact that we have
this information in Bazel already.
3. Creating a new job that runs tests on Saucelabs with Bazel. We specify
fine-grained test targets that should run. This would be a good start
(e.g. acceptance tests) and also would mean that we do not continue maintaining
the legacy setup..
This commit implements the third option as it allows us to move forward
with the general Bazel migration. We don't want to spend too much time
on our legacy setup since it will be removed anyway in the future.
PR Close#34277
When we log DI errors we get the name of the provider via `SomeClass.name`. In IE functions that inherit from other functions don't have their own `name`, but they take the `name` from the lowest parent in the chain, before `Function`. I've added some changes to fall back to parsing out the function name from the function's string form.
PR Close#34305
The way definitions are added in JIT mode is through `Object.defineProperty`, but the problem is that in IE10 properties defined through `defineProperty` won't be inherited which means that inheriting injectable definitions no longer works. These changes add a workaround only for JIT mode where we define a fallback method for retrieving the definition. This isn't ideal, but it should only be required until v10 where we'll no longer support inheriting injectable definitions from undecorated classes.
PR Close#34305
In JIT mode we use `__proto__` when reading constructor parameter metadata, however it's not supported on IE10. These changes switch to using `Object.getPrototypeOf` instead.
PR Close#34305
We've got some tests that assert that the generate DOM looks correct. The problem is that IE changes the attribute order in `innerHTML` which caused the tests to fail. I've reworked the relevant tests not to assert directly against `innerHTML`.
PR Close#34305
We have a couple of cases where we use something like `typeof Node === 'function'` to figure out whether we're in a worker context. This works in most browsers, but IE returns `object` instead of `function`. I've updated all the usages to account for it.
PR Close#34305
In `DebugElement.attributes` we return all of the attributes from the underlying DOM node. Most browsers change the attribute names to lower case, but IE preserves the case and since we use camel-cased attributes, the return value was inconsitent. I've changed it to always lower case the attribute names.
PR Close#34305
While sanitizing on browsers that don't support the `template` element (pretty much only IE), we create an inert document and we insert content into it via `document.body.innerHTML = unsafeHTML`. The problem is that IE appears to parse the HTML passed to `innerHTML` differently, depending on whether the element has been inserted into a document or not. In particular, it seems to split some strings into multiple text nodes, which would've otherwise been a single node. This ended up throwing off some of the i18n code down the line and causing a handful of failures. I've worked around it by creating a new inert `body` element into which the HTML would be inserted.
PR Close#34305
Previously the calls to run the schematics were not being properly
or consistently awaited in the tests. While this currently does not
affect the tests' performance, this fix corrects the syntax and
adds stability for future changes.
PR Close#34364
Previously, the compiler performed an incremental build by analyzing and
resolving all classes in the program (even unchanged ones) and then using
the dependency graph information to determine which .js files were stale and
needed to be re-emitted. This algorithm produced "correct" rebuilds, but the
cost of re-analyzing the entire program turned out to be higher than
anticipated, especially for component-heavy compilations.
To achieve performant rebuilds, it is necessary to reuse previous analysis
results if possible. Doing this safely requires knowing when prior work is
viable and when it is stale and needs to be re-done.
The new algorithm implemented by this commit is such:
1) Each incremental build starts with knowledge of the last known good
dependency graph and analysis results from the last successful build,
plus of course information about the set of files changed.
2) The previous dependency graph's information is used to determine the
set of source files which have "logically" changed. A source file is
considered logically changed if it or any of its dependencies have
physically changed (on disk) since the last successful compilation. Any
logically unchanged dependencies have their dependency information copied
over to the new dependency graph.
3) During the `TraitCompiler`'s loop to consider all source files in the
program, if a source file is logically unchanged then its previous
analyses are "adopted" (and their 'register' steps are run). If the file
is logically changed, then it is re-analyzed as usual.
4) Then, incremental build proceeds as before, with the new dependency graph
being used to determine the set of files which require re-emitting.
This analysis reuse avoids template parsing operations in many circumstances
and significantly reduces the time it takes ngtsc to rebuild a large
application.
Future work will increase performance even more, by tackling a variety of
other opportunities to reuse or avoid work.
PR Close#34288
This commit fixes a couple issues that prevent `class_binding` benchmark from running: moving constants requires by the `benchmark` function before function declaration and referencing correct consts in template instructions.
PR Close#34242
The `ModuleWithProviders` type has an optional type parameter that
should be specified to indicate what NgModule class will be provided.
This enables the Ivy compiler to statically determine the NgModule type
from the declaration files. This type parameter will become required in
the future, however to aid in the migration the compiler will detect
code patterns where using `ModuleWithProviders` as return type is
appropriate, in which case it transforms the emitted .d.ts files to
include the generic type argument.
This should reduce the number of occurrences where `ModuleWithProviders`
is referenced without its generic type argument.
Resolves FW-389
PR Close#34235
TypeScript 3.7 flags `if` conditions that implicitly coerce a function/method definition. While checking for the `template` presence on a def (actually checking whether we work with Component) in `saveNameToExportMap`, the `if` condition had implicit type coercion. This commit updates the condition to use the `isComponentDef` function (that checks `def.template` against `null` internally) to avoid compilation errors with TypeScript 3.7.
PR Close#34335
Prior to this commit, values wrapped into SafeStyle were not handled correctly in [style.prop] bindings in case style sanitizer is present (when template contains some style props that require sanitization). Style sanitizer was not unwrapping values in case a given prop doesn't require sanitization.As a result, wrapped values were used as final styling values (see https://github.com/angular/angular/blob/master/packages/core/src/render3/styling/bindings.ts#L620). This commit updates the logic to unwrap safe values in sanitizer in case no sanitization is required.
PR Close#34286
Occasionally a factory function needs to be generated for an "invalid"
constructor (one with parameters types which aren't injectable). Typically
this happens in JIT mode where understanding of parameters cannot be done in
the same "up-front" way that the AOT compiler can.
This commit changes the JIT compiler to generate a new `invalidFactoryDep`
call for each invalid parameter. This instruction will error at runtime if
called, indicating both the index of the invalid parameter as well as (via
the stack trace) the factory function which was generated for the type being
constructed.
Fixes#33637
PR Close#33739
In Ivy, if you do:
`TestBed.configureTestingModule({providers: [{provide: Service}]});`
the injector will attempt to inject Service as if it was simply listed
in the providers array like `{providers: [Service]}`
This fixes an inconsistency when similarly providing an override with no
`useValue` or `useFactory`.
PR Close#33769
Prior to this commit, calling change detection for destroyed views resulted in errors being thrown in some cases. This commit adds a check to make sure change detection is invoked for non-destroyed views only.
PR Close#34241
Adds the ability to expose global symbols in the API docs via the `@globalApi` tag. Also supports optionally setting a namespace which will be added to the name automatically (e.g. `foo` will be renamed to `ng.foo`). Relevant APIs should also be exported through the `global.ts` file which will show up under `core/global`.
PR Close#34237
If the `ngI18nClosureMode` global check actually makes it
through to the runtime, then checks for its existence should
be guarded to prevent `Reference undefined` errors in strict
mode.
(Normally, it is stripped out by dead code elimination during
build optimization.)
PR Close#34211
Prior to this commit, there was no check in R3TestBed to verify that metadata is resolved using a given Type. That leads to some cryptic error messages (when TestBed tries to compile a Type without having metadata) in case TestBed override functions receive unexpected Types (for example a Directive is used in `TestBed.overrideComponent` call). This commit adds the necessary checks to verify metadata presence before TestBed tries to (re)compile a Type.
PR Close#34204
Prior to this commit, if a template (for example, generated using structural directive such as *ngIf) contains `ngProjectAs` attribute, it was not included into attributes array in generated code and as a result, these templates were not matched at runtime during content projection. This commit adds the logic to append `ngProjectAs` values into corresponding element's attribute arrays, so content projection works as expected.
PR Close#34200
Prior to this commit, i18n runtime code failed with the exception saying that no provider was found for ChangeDetectorRef for a pipe used in ICU. The problem happened because the underlying `createViewRef` function was not taking into account IcuContainer as a valid TNodeType. This commit updates the `createViewRef` function to return corresponding ViewRef for TNodeType.IcuContainer.
PR Close#34198
Includes a few minor performance improvements:
* In the `nextContext` instruction we assign a new LView to the `LFrame.contextLView` and then we immediately look it up to get its context. We don't need to do that since we know the view that was assigned already.
* Removes the default value for the `level` parameter of `nextContextImpl` because it generates more code in es5 and is internal-only.
* Removes the default parameter from `setActiveHostElement` since it generates extra code and it's an internal function.
* Makes a check in `setElementExitFn` more strict since we're guaranteed for the value to match the type.
PR Close#34183
Fixes ngtsc incorrectly logging an unknown element diagnostic for HTML elements that are inside an SVG `foreignObject` with the `xhtml` namespace.
Fixes#34171.
PR Close#34178
Prior to this commit, the unknown element can happen twice for AOT-compiled components: once during compilation and once again at runtime. Due to the fact that `schemas` information is not present on Component and NgModule defs after AOT compilation, the second check (at runtime) may fail, even though the same check was successful at compile time. This commit updates the code to avoid the second check for AOT-compiled components by checking whether `schemas` information is present in a logic that executes the unknown element check.
PR Close#34024
With Angular CLI version 9 RC 3 we can run a single migration for a package using the name of the migration schematic.
We need to pass the schematic name as a value to the `migrate-only` option.
Ex:
```
ng update @angular/core --migrate-only migration-v9-undecorated-classes-with-di
```
See: https://github.com/angular/angular-cli/pull/16174
PR Close#33958
Use angular_ivy_enabled to determine if Ivy is being used for the ivy_test_selector.ts symbols.
Additionally, remove the reflect_metadata genrules as we not longer have a "jit" compile option
so all possible invocations result in the same generated file. Instead we can just commit this
file.
PR Close#33983
Since config=ivy now sets the define=compile flag and the define=angular_ivy_enabled
flag to cause usage of Ivy, we can update all of the documentation and scripts that
reference compile=aot to use config=ivy.
PR Close#33983
Prior to this commit, there was a runtime check in i18n logic to make sure "other" case is always present in an ICU. That was not a requirement in View Engine, so ICUs that previously worked may produce errors. This commit removes that restriction and adds support for ICUs without "other" cases.
PR Close#34042
Move a view only if it would end up at a different place.
Otherwise we would do unnecessary processing like DOM manipulation, query notifications etc.
Thanks to @pkozlowski-opensource for the change.
PR Close#34052
When inserting a `viewRef` it is possible to not provide
an `index`, which is regarded as appending to the end of
the container.
If the `viewRef` already exists in the container, then
this results in a move. But there was a fault in the logic
that computed where to insert the `viewRef` that did not
account for the fact that the `viewRef` was already in
the container, so the insertion `index` was outside the
bounds of the array.
Fixes#33924
PR Close#34052
Prior to this commit, all styles extracted from Component's template (defined using <style> tags) were ignored by JIT compiler, so only `styles` array values defined in @Component decorator were used. This change updates JIT compiler to take styles extracted from the template into account. It also ensures correct order where `styles` array values are applied first and template styles are applied second.
PR Close#34017
Previously if a type was returning itself it would cause an infinite loop in tsickle. We worked around it with a type that alises to `any`. Now that the issue has been resolved in tsickle, we can clean up the workaround.
PR Close#34019
This commit fixes a compatibility bug where pre-order lifecycle
hooks (onInit, doCheck, OnChanges) for directives on the same
host node were executed based on the order the directives were
matched, rather than the order the directives were instantiated
(i.e. injection order).
This discrepancy can cause issues with forms, where it is common
to inject NgControl and try to extract its control property in
ngOnInit. As the NgControl directive is injected, it should be
instantiated before the control value accessor directive (and
thus its hooks should run first). This ensures that the NgControl
ngOnInit can set up the form control before the ngOnInit
for the control value accessor tries to access it.
Closes#32522
PR Close#34026
These apis have been deprecated in v8, so they should stick around till v10,
but since they are defunct we are removing them early so that they don't take up payload size.
PR Close#33949
Micro-benchmarks were broken after we've introduced concept of
DECLARATION_COMPONENT_VIEW on LView (after this change embedded
views must have a pointer to a parent LView).
PR Close#34031
The root view case is already covered by the existing code in the
getRenderParent function so no need to have an explicit checks
(and associated memory reads) again.
PR Close#33988
The assertion that we have in the `directiveInject` instruction is too restrictive and we came across some pattern where it throws unnecessarily. This commit removes that assertion for now and more detailed investigation is needed to decide is we need to restrict the set of TNodeType again.
This commit also adds a test which triggered the TNodeType.View to come up in the `directiveInject` instruction, so it might be useful to avoid regressions during further refactoring.
PR Close#33948
NgModule compilation in JIT mode (that is also used in TestBed) caches module scopes on NgModule defs (using `transitiveCompileScopes` field). Module overrides (defined via TestBed.overrideModule) may invalidate this data by adding/removing items in `declarations` list. This commit forces TestBed to recalculate transitive scopes in case module overrides are present, so TestBed always gets the most up-to-date information.
PR Close#33787
This change enables "var(--my-var)" to pass through the style sanitizer.
After consulation with our security team, allowing these doesn't create
new attack vectors, so the sanitizer doesn't need to strip them.
Fixes parts of #23485 related to the sanitizer, other use cases discussed
there related to binding have been addressed via other changes to the
class and style handling in the runtime.
Closes#23485
PR Close#33841
NgModules in Ivy have a definition which contains various different bits
of metadata about the module. In particular, this metadata falls into two
categories:
* metadata required to use the module at runtime (for bootstrapping, etc)
in AOT-only applications.
* metadata required to depend on the module from a JIT-compiled app.
The latter metadata consists of the module's declarations, imports, and
exports. To support JIT usage, this metadata must be included in the
generated code, especially if that code is shipped to NPM. However, because
this metadata preserves the entire NgModule graph (references to all
directives and components in the app), it needs to be removed during
optimization for AOT-only builds.
Previously, this was done with a clever design:
1. The extra metadata was added by a function called `setNgModuleScope`.
A call to this function was generated after each NgModule.
2. This function call was marked as "pure" with a comment and used
`noSideEffects` internally, which causes optimizers to remove it.
The effect was that in dev mode or test mode (which use JIT), no optimizer
runs and the full NgModule metadata was available at runtime. But in
production (presumably AOT) builds, the optimizer runs and removes the JIT-
specific metadata.
However, there are cases where apps that want to use JIT in production, and
still make an optimized build. In this case, the JIT-specific metadata would
be erroneously removed. This commit solves that problem by adding an
`ngJitMode` global variable which guards all `setNgModuleScope` calls. An
optimizer can be configured to statically define this global to be `false`
for AOT-only builds, causing the extra metadata to be stripped.
A configuration for Terser used by the CLI is provided in `tooling.ts` which
sets `ngJitMode` to `false` when building AOT apps.
PR Close#33671
Originally, QueryList implemented Iterable and provided a Symbol.iterator
on its prototype. This caused issues with tree-shaking, so QueryList was
refactored and the Symbol.iterator added in its constructor instead. As
part of this change, QueryList no longer implemented Iterable directly.
Unfortunately, this meant that QueryList was no longer assignable to
Iterable or, consequently, NgIterable. NgIterable is used for NgFor's input,
so this meant that QueryList was not usable (in a type sense) for NgFor
iteration. View Engine's template type checking would not catch this, but
Ivy's did.
As a fix, this commit adds the declaration (but not the implementation) of
the Symbol.iterator function back to QueryList. This has no runtime effect,
so it doesn't affect tree-shaking of QueryList, but it ensures that
QueryList is assignable to NgIterable and thus usable with NgFor.
Fixes#29842
PR Close#33536
TNode.inputs are initialised during directives resolution now so we know early
if a node has directives with inputs or no. We don't need to use undefined value
as an indicator that inputs were not resolved yet.
PR Close#33798
Before this change a public name of a directive's input
was stored in 2 places:
- as a key of an object on TNode.index;
- as a value of PropertyAliasValue at the index 1
This PR changes the data structure so the public name is stored
only once as a key on TNode.index. This saves one array entry
for each and every directive input.
PR Close#33798
Adds support for chaining of `styleProp`, `classProp` and `stylePropInterpolateX` instructions whenever possible which should help generate less code. Note that one complication here is for `stylePropInterpolateX` instructions where we have to break into multiple chains if there are other styling instructions inbetween the interpolations which helps maintain the execution order.
PR Close#33837
This refactorings clearly separates the first and subsequent creation execution
of the `template` instruction. This approach has the following benefits:
- it is clear what happens during the first vs. subsequent executions;
- we can avoid several memory reads and checks after the first creation pass
(there is measurable performance improvement on various benchmarks);
- the template instructions becomes smaller and should become a candidate
for optimisations / inlining faster;
PR Close#33856
When asking for a ViewContainerRef on <ng-container> we do reuse <ng-container> comment
node as a LContainer's anachor. Before this fix the act of re-using a <ng-container>'s
comment node would result in this comment node being re-appended to the DOM in the wrong
place. With the fix in this PR we make sure that re-using <ng-container>'s comment node
doesn't result in unwanted DOM manipulation (ng-gontainer's comment node is already part
of the DOM and doesn't have to be re-created / re-appended).
PR Close#33816
In View Engine, providers which neither used `useValue`, `useClass`,
`useFactory` or `useExisting`, were interpreted differently.
e.g.
```
{provide: X} -> {provide: X, useValue: undefined}, // this is how it works in View Engine
{provide: X} -> {provide: X, useClass: X}, // this is how it works in Ivy
```
The missing-injectable migration should migrate such providers to the
explicit `useValue` provider. This ensures that there is no unexpected
behavioral change when updating to v9.
PR Close#33709
If the application is not running directly in the browser, e.g.
universal or app-shell, then the `$localize` import must be
adding to a different file than for normal browser applications.
This commit adds more information about this to avoid any
confusion.
// FW-1557
PR Close#33826
Prior to this commit the assert that we have in `directiveInject` (assert introduced recently) didn't include IcuContainer TNode type and as a result, the error is thrown in case pipes with dependencies are used inside ICUs. This commit extends the assert to allow for IcuContainer TNode types.
PR Close#33832
This commit moves the `setLContainerActiveIndex` and `getLContainerActiveIndex` functions used in a few files to a common `util/view_util.ts` lib to avoid cyclical dependency while importing `instructions/container.ts` where these functions located originally.
PR Close#33831
Currently if a consumer does something like the following, the object literal will be shared across the two elements and any instances of the component template. The same applies to array literals:
```
<div [someDirective]="{}"></div>
<div [someDirective]="{}"></div>
```
These changes make it so that we generate a pure function even if an object is constant so that each instance gets its own object.
Note that the original design for this fix included moving the pure function factories into the `consts` array. In the process of doing so I realized that pure function are also used inside of directive host bindings which means that we don't have access to the `consts`.
These changes also:
* Fix an issue that meant that the `pureFunction0` instruction could only be run during creation mode.
* Make the `getConstant` utility slightly more convenient to use. This isn't strictly required for these changes to work, but I had made it as a part of a larger refactor that I ended up reverting.
PR Close#33705
This is a breaking change in nodejs rules 0.40.0 as part of the API review & cleanup for the 1.0 release. Their APIs are identical as ts_web_test was just karma_web_test without the config_file attribute.
PR Close#33802
Prior to this change, setting style prop value to undefined or empty string would not result in resetting prop value in case the style prop is defined using [style.prop.px] syntax. The problem is that the check for empty value (and thus reseting the value) considered successful only in case of `null` value. This commit updates the check to use `isStylingValueDefined` function that also checks for undefined and empty string.
PR Close#33780
Prior to this change, ComponentFactory.create function invocation in Ivy retained the content of the host element (in case host element reference or CSS seelctor is provided as an argument). This behavior is different in View Engine, where the content of the host element was cleared, except for the case when ShadowDom encapsulation is used (to make sure native slot projection works). This commit aligns Ivy and View Engine and makes sure the host element is cleared before component content insertion.
PR Close#33487
The `ngInjectableDef` property was renamed to `ɵprov`, but core must
still support both because there are published libraries that use the
older term.
We are only interested in such properties that are defined directly on
the type being injected, not on base classes. So there is a check that
the defintion is specifically for the given type.
Previously if you tried to inject a class that had `ngInjectableDef` but
also inherited `ɵprov` then the check would fail on the `ɵprov` property
and never even try the `ngInjectableDef` property resulting in a failed
injection.
This commit fixes this by attempting to find each of the properties
independently.
Fixes https://github.com/angular/ngcc-validation/pull/526
PR Close#33732
Chains multiple listener instructions on a particular element into a single call which results in less generated code. Also handles listeners on templates, host listeners and synthetic host listeners.
PR Close#33720
Most of the use of `document` in the framework is within
the DI so they just inject the `DOCUMENT` token and are done.
Ivy is special because it does not rely upon the DI and must
get hold of the document some other way. There are a limited
number of places relevant to ivy that currently consume a global
document object.
The solution is modelled on the `LOCALE_ID` approach, which has
`getLocaleId()` and `setLocaleId()` top-level functions for ivy (see
`core/src/render3/i18n.ts`). In the rest of Angular (i.e. using DI) the
`LOCALE_ID` token has a provider that also calls setLocaleId() to
ensure that ivy has the same value.
This commit defines `getDocument()` and `setDocument() `top-level
functions for ivy. Wherever ivy needs the global `document`, it calls
`getDocument()` instead. Each of the platforms (e.g. Browser, Server,
WebWorker) have providers for `DOCUMENT`. In each of those providers
they also call `setDocument()` accordingly.
Fixes#33651
PR Close#33712
While overriding providers in Ivy TestBed (via TestBed.overrideProvider call), the old providers were retained in the list, since the override takes precedence. However, presence of providers in the list might have side-effect: if a provider has the `ngOnDestroy` lifecycle hook, this hook will be registered and invoked later (when component is destroyed). This commit updates TestBed logic to clear provider list by removing the ones which have overrides.
PR Close#33706
Prior to this patch all the styling benchmarks only tested for
template map-based style/class bindings. Because of each of the bindings
being only present in the template, there was no possibility of
there being any duplicate map-based styling bindings.
This benchmark introduces benchmarking for map-based style/class bindings
that are evaluated from both template bindings as well as directives.
This benchmark can be executed by calling:
```
bazel build //packages/core/test/render3/perf:duplicate_map_based_style_and_class_bindings_lib.min_debug.es2015.js
node dist/bin/packages/core/test/render3/perf/duplicate_map_based_style_and_class_bindings_lib.min_debug.es2015.js
```
The benchmark is also run via the `profile_all.js` script (found in
`packages/core/test/render3/perf/`)
PR Close#33608
Prior to this patch all the styling benchmarks only tested for
template-based style/class bindings. Because of each of the bindings
being only present in the template, there was no possibility of
there being any duplicate bindings. This benchmark introduces
style/class bindings being evaluated from both a template and from
various directives.
This benchmark can be executed by calling:
```
bazel build //packages/core/test/render3/perf:duplicate_style_and_class_bindings_lib.min_debug.es2015.js
node dist/bin/packages/core/test/render3/perf/duplicate_style_and_class_bindings_lib.min_debug.es2015.js
```
The benchmark is also run via the `profile_all.js` script (found in
`packages/core/test/render3/perf/`)
PR Close#33600
crisbeto
Paul Gschwendtner
Misko Hevery
Sonu Kapoor
Samuel
pkozlowski-opensource
Andrew Kushnir
Judy Bogart
Santosh Yadav
JiaLiPassion
Harri Lehtola
Tiep Phan
ajitsinghkaler
Joey Perrott
AleksanderBodurri
Andrew Scott
Kara Erickson
Igor Minar
Alan Agius
Daniel Seibel Silva
Matias Niemelä
Michiel Kikkert
Pete Bacon Darwin
Wagner Maciel
JoostK
Filipe Silva
danranVm
Joey Perrott
Alex Rickabaugh
Doug Parker
KostyaTretyak
Zac
Felix Becker
Greg Magolan
zhuyujie
Stephen Fluin
Sonu Kapoor
George Kalpakas
cexbrayat
Mike Casebolt
Andrius
Hayouung
atscott
Adam Plumer
Jithil P Ponnan
zuckjet
Feliks Khantsis
Danny Skoog
Christopher Dahm
horn
Lars Gyrup Brink Nielsen
mohax
NothingEverHappens