Prior to this change we manage a local version of commit message validation
in addition to the commit message validation tool contained in the ng-dev
tooling. By adding the ability to validate a range of commit messages
together, the remaining piece of commit message validation that is in the
local version is replicated.
We use both commands provided by the `ng-dev commit-message` tooling:
- pre-commit-validate: Set to automatically run on an git hook to validate
commits as they are created locally.
- validate-range: Run by CI for every PR, testing that all of the commits
added by the PR are valid when considered together. Ensuring that all
fixups are matched to another commit in the change.
PR Close#36172
Update to clang@1.4.0 to gain support for optional changing and nullish
coalescing. Because this would trigger a change on >1800 files in the
repository, also changes our format enforcement to only be run against
changed files. This will allow us to incramentally roll out the value
add of the upgraded clang format.
PR Close#36203
Switches our tslint setup to the standard `tslint.json` linter excludes.
The set of files that need to be linted is specified through a Yarn script.
For IDEs, open files are linted with the closest tslint configuration, if the
tslint IDE extension is set up, and the source file is not excluded.
We cannot use the language service plugin for tslint as we have multiple nested
tsconfig files, and we don't want to add the plugin to each tsconfig. We
could reduce that bloat by just extending from a top-level tsconfig that
defines the language service plugin, but unfortunately the tslint plugin does
not allow the use of tslint configs which are not part of the tsconfig project.
This is problematic since the tslint configuration is at the project root, and we
don't want to copy tslint configurations next to each tsconfig file.
Additionally, linting of `d.ts` files has been re-enabled. This has been
disabled in the past and a TODO has been left. This commit fixes the
lint issues and re-enables linting.
PR Close#35800
the commit causes lint on upstream/master to fail. We need to fix the script to not check too many past commits, but that
will have to wait until a follow up PR.
PR Close#35017
Creates a Bazel macro that can be used to test packages for
circular dependencies. We face one limitation with Bazel:
* Built packages use module imports, and not relative source file
paths. This means we need custom resolution.
Fortunately, tools like `madge` support custom resolution.
Also removes the outdated `check-cycles` gulp task that
didn't catch circular dependencies. It seems like the test
became broken when we switched the packages-dist output to Bazel. It
breaks because the Bazel output doesn't use relative paths, but uses
the module imports. This will be handled in the new Bazel macro/rule.
PR Close#34774
In order to support adding locales during compile-time
inlining of translations (i.e. after the TS build has completed),
we need to be able to attach the locale to the global scope.
This commit modifies CLDR extraction to emit additional "global"
locale files that appear in the `@angular/common/locales/global` folder.
These files are of the form:
```
(function() {
const root = typeof globalThis !== 'undefined' && globalThis ||
typeof global !== 'undefined' && global || typeof window !== 'undefined' && window;
root.ng = root.ng || {};
root.ng.common = root.ng.common || {};
root.ng.common.locale = root.ng.common.locale || {};
const u = undefined;
function plural(n) {
if (n === 1) return 1;
return 5;
}
root.ng.common.locale['xx-yy'] = [...];
})();
```
The IIFE will ensure that `ng.common.locale` exists and attach the
given locale (and its "extras") to it using it "normalized" locale
name.
* "extras": in the UMD module locale files the "extra" locale data,
currently the day period rules, and extended day period data, are
stored in separate files under the "common/locales/extra" folder.
* "normalized": Angular references locales using a normalized form,
which is lower case with `_` replaced by `-`. For example:
`en_UK` => `en-uk`.
PR Close#33523
This commit implements a tool that will inline translations and generate
a translated copy of a set of application files from a set of translation
files.
PR Close#32881
Historically, we've cleaned Ivy commits out of the CHANGELOG because
Ivy was not available except as a preview. Given that Ivy will soon
be the default in 9.0.0, it no longer makes sense to remove the Ivy
commits from the log. This changes the gulp changelog task so that
Ivy commits are included by default.
PR Close#32114
Previously, `validate-commit-message` would treat `fixup! `-prefixed
commits like this:
- It would strip the `fixup! ` prefix.
- It would validate the rest of the commit message header as any other
commit.
However, fixup commits are special in that they need to exactly match an
earlier commit message header (sans the `fixup! ` prefix) in order for
git to treat them correctly. Otherwise, they will not be squashed into
the original commits and will be merged as is. Fixup commits can end up
not matching their original commit for several reasons (e.g. accidental
typo, changing the original commit message, etc.).
This commit prevents invalid fixup commits to pass validation by
ensuring that they match an earlier (unmerged) commit (i.e. a commit
between the current HEAD and the BASE commit).
NOTE: This new behavior is currently not activated in the pre-commit git
hook, that is used to validate commit messages (because the
preceding, unmerged commits are not available there). It _is_
activated in `gulp validate-commit-message`, which is run as part
of the `lint` job on CI and thus will detect invalid commits,
before their getting merged.
PR Close#32023
While `fixup! ` is fine, `squash! ` means that the commit message needs
tweaking, which cannot be done automatically during merging (i.e. it
should be done by the PR author).
Previously, `validate-commit-message` would always allow
`squash! `-prefixed commits, which would cause problems during merging.
This commit changes `validate-commit-message` to make it configurable
whether such commits are allowed and configures the
`gulp validate-commit-message` task, which is run as part of the `lint`
job on CI, to not allow them.
NOTE: This new check is disabled in the pre-commit git hook that is used
to validate commit messages, because these commits might still be
useful during development.
PR Close#32023
This was causing issues, because `zone.js` looks like a JS file (despite
it being a directory). The contents of `zone.js/` are still matched by
the globs (it is only the directory itself that is excluded).
Related to #30962.
PR Close#31295
Plural ICU expressions depend on the locale (different languages have different plural forms). Until now the locale was hard coded as `en-US`.
For compatibility reasons, if you use ivy with AOT and bootstrap your app with `bootstrapModule` then the `LOCALE_ID` token will be set automatically for ivy, which is then used to get the correct plural form.
If you use JIT, you need to define the `LOCALE_ID` provider on the module that you bootstrap.
For `TestBed` you can use either `configureTestingModule` or `overrideProvider` to define that provider.
If you don't use the compat mode and start your app with `renderComponent` you need to call `ɵsetLocaleId` manually to define the `LOCALE_ID` before bootstrap. We expect this to change once we start adding the new i18n APIs, so don't rely on this function (there's a reason why it's a private export).
PR Close#29249
Plural ICU expressions depend on the locale (different languages have different plural forms). Until now the locale was hard coded as `en-US`.
For compatibility reasons, if you use ivy with AOT and bootstrap your app with `bootstrapModule` then the `LOCALE_ID` token will be set automatically for ivy, which is then used to get the correct plural form.
If you use JIT, you need to define the `LOCALE_ID` provider on the module that you bootstrap.
For `TestBed` you can use either `configureTestingModule` or `overrideProvider` to define that provider.
If you don't use the compat mode and start your app with `renderComponent` you need to call `ɵsetLocaleId` manually to define the `LOCALE_ID` before bootstrap. We expect this to change once we start adding the new i18n APIs, so don't rely on this function (there's a reason why it's a private export).
PR Close#29249
Previously, the `validate-commit-message` gulp task was using the
`git log ... ^r1 r2` syntax to list commits between the base branch and
the current head. This didn't work as expected on Windows, because `^`
is the escape character. As a result, the command was equivalent to
`git log ... r1 r2` on Windows, which essentially logs all commits
reachable from either `r1` or `r2`.
This commit fixes it by switching to git's
[double-dot range notation][1] (`r1..r2`), which is an alias for the
`^r1 r2` syntax and works correctly on all platforms.
[1]: https://git-scm.com/docs/gitrevisions#_dotted_range_notationsFixes#16830
PR Close#28780
Stop execution when an error happens in `validate-commit-message` gulp
task and ensure the error message is printed at the bottom.
Fixes#16829
PR Close#28780
* No longer builds the example e2e tests using "tsc". The examples are now built with Bazel and can therefore be built with Ivy by using the `--define=compile=aot` switch.
* No longer runs the example e2e tests using the protractor CLI. example e2e tests are executed with the Bazel protractor rule and can therefore run incrementally.
NOTE: Unit tests found within the examples are still running within the legacy jobs.
PR Close#28402
there is still too much churn to make this info useful in the release notes, advanced
developers can use git log to find out what's going on with ivy.
PR Close#27532
This fix is for the issue below when compiling I18N Angular apps using closure.
For certain locales closure converts the input locale id to a different equivalent locale string. For example if the input locale is 'id'(for Indonesia) goog.LOCALE is set to 'in' and the closure locale data is registered only for 'in'. The Angular compiler uses the original input locale string, 'id' to set the LOCALE_ID token and there is a mismatch of locale used to register and locale used when requesting the locale data.
The fix is for the closure-locale.ts code to register the locale data for all equivalent locales names so that it doesn't matter what goog.LOCALE is actually set to.
PR Close#25867
Joey Perrott
Paul Gschwendtner
Joey Perrott
Igor Minar
Pete Bacon Darwin
Feliks Khantsis
Miško Hevery
Kara Erickson
George Kalpakas
JiaLiPassion
Olivier Combe
Alex Rickabaugh
Daniel Ruf
Brandon Roberts
Vikram Subramanian
Rafael