This commit fixes a spelling error in the word error in the
observables.md guide. It is currently
spelled errror and the mistake is not intentional.
PR Close#36437
The major sections Angular Libraries, Schematics, and CLI Builders appear twice, in their old location under Techniques, and in the new correct location under Extending Angular
PR Close#37827
As reported in #37699, the size of the main angular.io bundle sometimes
ends up bigger than expected on CI. This usually goes away after
rerunning the job a couple of times.
It is unclear what is causing this. In order to help debug the issue,
this commit stores the JS files that are checked as part of the aio
payload-size check as CI artifacts, where they can be retrieved from and
inspected.
PR Close#37703
I was using schematics with the `--name` parameter instead of the `--project`, I did both ways before sending and my suspicion about outdated documentation was confirmed
PR Close#37681
Addresses small typos such as extra whitespaces.
This change was extracted from #29505.
This change was extracted from #29505.
This change was extracted from #29505.
PR Close#37753
The deployment to aio is currently failing because #37721 introduced
"project" entry into the firebase.json which means that we now need to
select the deployment target before deploying to firebase.
This change fixes the issue and refactors the file to be easier to read.
I also added extra echo statements so that the CI logs are easier to
read in case we need to troubleshoot future issues.
PR Close#37762
This typo caused the script to fail on Linux (interestingly it works fine on Mac).
This is a painful reminder that we should not write any more Bash scripts EVER. shelljs FTW! :-)
PR Close#37754
This commit uses the correct component (`HeroesComponent`) in the.
`MessageService`. Previously, the `MessageService` was using
`HeroeService`.
Closes#37654
PR Close#37666
v9.angular.io was used to pilot the firebase hosting multisites setup for angular.io.
The deployments so far have been done manually to control the deployment process.
This change, automates the deployment for v9.angular.io so that future deployments can be made from
the CI.
See https://angular-team.atlassian.net/browse/DEV-125 for more info.
In the process of updating the scripts I rediscovered a bug in the deploy-to-firebase.sh script that
incorrect compared two numbers as strings. This previously worked correctly because we were comparing
single digit numbers. With the release of v10, we now compare 9 > 10 which behaves differently for
strings and numbers. The bug was fixed by switching to an arithmetic comparison of the two variables.
This bug has been fixed on the master branch but not on the 9.1.x branch. I realized this during the
rebase, but found my version to be a bit cleaner, so I kept it.
PR Close#37721
This commit adds the support schedule for v10.
v10.0.0 was released on June 24, 2020.
Active support ends six months later, on Dec 24, 2020.
Long term support ends a year after that, on Dec 24, 2021.
PR Close#37745
Api search functionality only had unit tests @gkalpak suggested we should have some e2e tests too. Added some end to end tests.
Fixes#35170
PR Close#37612
Mostly just adding links to the migrations that were missing, adding the migrations into the navbar,
as well as correcting the @angular/bazel removal in the update guide.
I also added a commented out preamble for the release notes.
PR Close#37705
adds new DI technique recommendation for libraries to ensure tree-shaking for unused services
includes reasons for packaging schematics with libraries, clarify schematic usage recommendation
PR Close#36144
This adds documentation for the v10.0 tooling migration `update-module-and-target-compiler-options` contained within the `@schematics/angular` package.
PR Close#37429
This update includes modifications to the navigation.json file to
remove unneeded migration guides.
TODO: Redirects from v9 topics to v10; links to removed migration
guides need to point to v9.angular.io.
PR Close#37152
7521834296 added content for CLI
deprecations to the `angular.io` deprecations guide. It looks
like the anchor for the CLI deprecations is incorrect and
ends up showing up as code in the guide.
This commit fixes the anchor so that it doesn't show
up as code in the guide.
PR Close#37662
With this change we add the special `package.json` which is used to mark the application free of non-local side-effects in the application source files section
PR Close#37521
The default value was changed from `registerWhenStable` to
`registerWhenStable:30000` in 29e8a64cf0,
but the decumentation was not updated to reflect that.
This commit updates the documentation to mention the correct default
value.
PR Close#37555
In version 10, we have a new option for the `angular.json` file,
`allowedCommonJsDependencies`, so users can opt in to support
CommonJS modules.
PR Close#37331
This commit moves the contributor hover into the `@media(hover:hover)`
query. This will help to identify if the user's primary input mechanism
can hover over elements.
PR Close#37320
In version 10, there is a new `tsconfig.json` file, which contains
the paths to all other `tsconfig` files used in a workspace. The
previous `tsconfig.json` file still exists, but has been renamed to
`tsconfig.base.json`.
In addition to documenting this change, I have updated files that
refer to TypeScript configuration files generically to remove specific
references to `tsconfig.json.` This should help avoid confusing users.
PR Close#37222
intended as a class method
Change 'function' to 'method' for clarity that getHereos() is
intended as a class method in Tour of Heroes part 4.
PR Close#35998
With this change we add redirects for config files generated by the Angular CLI. These links form part of a comment in the generated files, thus it is important that they valid for the many years to come.
PR Close#37533
After PR #36601 which added icons to all external links. Documented how this is happening via comments in scss file. For details visit PR #36601
PR Close#37025
The word "both" is automatically connected with the previous two bullet points and not the following two (because documents are usually read from top to bottom), which made the original sentence confusing for first time readers.
PR Close#35528
Fixes issue [29535](https://github.com/angular/angular/issues/29535) for the tutorial (toh-pt6) to remove the phrase that directed the reader to delete mock-heroes.ts when it is still needed for further tutorial steps.
PR Close#37516
At present, users don't have an easy way to discover what
deprecations occurred for Angular CDK or Angular Material.
This change adds a link to the changelog to the deprecations.md
file.
PR Close#37491
Language tightened, and headings rewritten to focus on user tasks. Tasks now separated from concepts, and clarified as examples. Content is up-to-date and complete. Links to important information and relevant topics added.
PR Close#36820
Close#35157
In the current version of zone.js, zone.js uses it's own package format, and it is not following the rule
of Angualr package format(APF), so it is not easily to be consumed by Angular CLI or other bundle tools.
For example, zone.js npm package has two bundles,
1. zone.js/dist/zone.js, this is a `es5` bundle.
2. zone.js/dist/zone-evergreen.js, this is a `es2015` bundle.
And Angular CLI has to add some hard-coding code to handle this case, o5376a8b139/packages/schematics/angular/application/files/src/polyfills.ts.template (L55-L58)
This PR upgrade zone.js npm package format to follow APF rule, https://docs.google.com/document/d/1CZC2rcpxffTDfRDs6p1cfbmKNLA6x5O-NtkJglDaBVs/edit#heading=h.k0mh3o8u5hx
The updated points are:
1. in package.json, update all bundle related properties
```
"main": "./bundles/zone.umd.js",
"module": "./fesm2015/zone.js",
"es2015": "./fesm2015/zone.js",
"fesm2015": "./fesm2015/zone.js",
```
2. re-organize dist folder, for example for `zone.js` bundle, now we have
```
dist/
bundles/
zone.js // this is the es5 bundle
fesm2015/
zone.js // this is the es2015 bundle (in the old version is `zone-evergreen.js`)
```
3. have several sub-packages.
1. `zone-testing`, provide zone-testing bundles include zone.js and testing libraries
2. `zone-node`, provide zone.js implemention for NodeJS
3. `zone-mix`, provide zone.js patches for both Browser and NodeJS
All those sub-packages will have their own `package.json` and the bundle will reference `bundles(es5)` and `fesm2015(es2015)`.
4. keep backward compatibility, still keep the `zone.js/dist` folder, and all bundles will be redirected to `zone.js/bundles` or `zone.js/fesm2015` folders.
PR Close#36540
Periodic documentation cleanup of GDEs which are no longer in the Angular program.
Removed:
- "Filip Bruun Bech-Larsen"
- "Vinci Rufus"
- "Jeff Cross"
PR Close#36467
Libraries are still build using view engine even after Ivy being the default engine for building angular apps. Added note on why libraries are built using VE and how they will be automatically compiled in Ivy using ngcc making it compatible for both
Fixes#35625
PR Close#36556
There is great workaround for implementing staleWhileRevalidate strategy in service-worker by setting strategy to freshness and timeout to 0u. Documented this in service worker config where all other strategies are documented
Fixes#20402
PR Close#37301
This change just fixes various typos and misspellings across several docs.
I've included also a fix for an issue surfaced via #37423.
Closes#37423
PR Close#37443
The angular.io production deployment script (`deploy-to-firebase.sh`)
compares the major version corresponding to the current branch (e.g.
`8` for branch `8.1.x`) against the major stable version (e.g. `9` if
the current stable version is `9.1.0`). It then uses the result of that
comparison to determine whether the current branch corresponds to a
newer version than stable (i.e. an RC version) and thus should not be
deployed or to an older version and thus may need to be deployed to an
archive vX.angular.io project.
Previously, the script was using string comparison (`<`) to compare the
two major versions. This could produce incorrect results for an RC major
version that is numerically greater than the stable but
lexicographically smaller. For example, 10 vs 9 (10 is numerically
greater but lexicographically smaller than 9).
Example of a CI job that incorrectly tried to deploy an RC branch to
production: https://circleci.com/gh/angular/angular/726414
This commit fixes it by switching to an integer comparison (i.e. using
the `-lt` operator).
PR Close#37426
This commit adds an exception for "guide/bazel" to the navigationUrls in
the Service Worker config. This is needed for redirection to work.
PR Close#37190
PR #36601 itroduces icons on all links if the link contains https:// or http:// but there were some internal links left which contained https://angular.io. Removed https://angular.io from all these links.
PR Close#37157
The `rev` property has been in the initial commit that introduced
`resources.json` (196203f6d7) and has been
added to all new entries since (always with the value `true`). This
field is a remnant from back when this data was stored in a Firebase
Database and the `rev` field indicated whether the entry has been
reviewed/approved by a DevRel lead or something. Now that the data is
kept in the repository and the reviewing is done as part of the
corresponding PR, this field is no longer necessary.
PR Close#37181
This commit includes the following improvements:
- Document that the `create-image.sh` script (and by extention the
`update-preview-server.sh` script) need to have access to a `yarn`
executable.
- Add a note on cron jobs running in non-interactive, non-login shells
(which affects their execution context and have different behavior vs
running the same commands in an interactive, login shell).
- Change the Node.js and `yarn` installation instructions to ensure the
`yarn` executable will be available on the `PATH` and not require an
interactive, login shell (as happens, for example, when installing it
via [nvm](https://github.com/nvm-sh/nvm)). This makes it easier to set
up a cron job that runs the `update-preview-server.sh` script.
NOTE: The equivalent updates have been made on the GCE VM that hosts the
PR preview server.
PR Close#37015
In order to avoid unnecessary operations, the `update-preview-server.sh`
script, that is used to update the PR preview server Docker container,
will only try to update the Docker container if either any files in the
`aio/aio-builds-setup/` directory have changed since the last update or
if a previous update failed. A failed previous update is detected by
checking whether the temporary `aio-builds:provisional` Docker image
still exists. This temporary image is created during the update
operation and is renamed to `aio-builds:latest` if the update goes well.
Previously, the update script was not able to detect a previous failed
attempt if the operation failed before creating the
`aio-builds:provisional` Docker image, such as if the `create-image.sh`
script failed. This could lead to a situation where the preview server
Docker container would not be updated after a failed attempt.
This commit improves the logic for detecting failed attempts to account
for this type of failures. It does this by not removing an older
`aio-builds:provisional` Docker image until a new one is successfully
created.
NOTE: While this is not full-proof, it is an improvement as it
eliminates a certain kind of failures.
PR Close#37015
Some tests currently fail with a TS error
```
TS2783: 'id' is specified more than once, so this usage will be overwritten.
```
This changes fixes that.
PR Close#37129
Some properties in the DOM lib interface `CSSStyleDeclaration` are not assignable such as `getPropertyPriority` and `getPropertyValue`. With this change we filter out properties which type is not `string` to fix the below error;
```ts
ERROR in src/app/layout/doc-viewer/doc-viewer.component.ts:202:43 - error TS2322: Type 'string' is not assignable to type 'string & ((property: string) => string) & ((property: string) => string) & ((index: number) => string) & ((property: string) => string) & ((property: string, value: string | null, priority?: string | undefined) => void)'.
Type 'string' is not assignable to type '(property: string) => string'.
202 ? this.void$.pipe(tap(() => elem.style[prop] = to))
~~~~~~~~~~~~~~~~
```
PR Close#37129
`skipLibCheck` had to be added to a few AIO examples, because of a breaking change in master. These changes update to a newer version of `angular-in-memory-web-api` that accounts for the breaking change.
PR Close#37128
Previously this inline-tag-def was returning the `doc` which is rendered
to the output as `[Object Object]` - obviously not what is intended.
Now it returns `''` which effectively strips the tag handler from the
rendered output.
PR Close#37132
After rewriting much of the router doc, it became apparent that the lazy loading/preloading information should be in the lazy loading doc rather than in the router doc. There is now instead a short section that touches on lazy loading but links to the lazy learning document instead of covering it in detail in the router doc.
PR Close#36748
The current implementation for redirecting users inside guards was in place
before the feature was added to allow `CanActivate` and `CanActivateChild` guards
to return `UrlTree` for redirecting users.
Returning `UrlTree` should be the default method, as it provides a more desirable
redirecting experience. When using `router.navigate` followed by `return false`,
the `Router` calls `resetUrlToCurrentUrlTree` (in the `finalize` operator) before
processing the navigation to the new route. This can result in an undesirable
history if the navigation was the first navigation in the application - that is,
the route will briefly be reset to just `/` (see #36187).
Fixes#36187
PR Close#37100
This was originally pushed by @igorminar in #36944, but later reverted in #35621
This commit reintroduces the original changes, and remove the `@angular/http` secion from the deprecations guide.
PR Close#37070
In the code base there are cases where there is, conceptually, a class
that is represented by a combination of an `interface`
(type declaration) and a `const` (value declaration).
For example:
```
export interface SomeClass {
count(a?: string): number;
}
export const: SomeClass = class {
someMethod(a: string = ''): number { ... }
};
```
These were being rendered as interfaces and also not
correctly showing the descriptions and default parameter
values.
In this commit such concepts are now rendered as classes.
The classes that are affected by this are:
* `DebugElement`
* `DebugNode`
* `Type`
* `EventEmitter`
* `TestBed`
Note that while decorators are also defined in this form
they have their own rendering type (`decorator`) and so
are not affecte by this.
PR Close#36989
We recently disabled the e2e tests for `upgrade-phonecat-2-hybdrid`
because the switch to APF 10 caused it to fail with an uglify
error. More details in a dedicated issue here:
https://github.com/angular/angular/issues/36957.
We can re-enable the test by switching to Terser that properly
handles ES2015 syntax. Previously the rollup bundle consisted
only of ES5 output as the Angular framework packages provided
ES5 output. With APF 10, there is no ES5 output except for the
non-optimizable UMD format.
Hence we either need to downlevel code to ES5, or use Terser
that supports ES2015 syntax.
Closes#36957.
PR Close#36969
Cindy has been working with us for a while now
and should be listed on AIO as a part of our team.
This commit adds her image / bio to the Angular
contributors page.
PR Close#37076
This commit removes the duplicate `and` found in the
`Support for the development cycle` section part of the
getting started guide.
Fixes#37060
PR Close#37067
Pete Bacon Darwin
Jaskaran Singh
Judy Bogart
nobobo1234
Maksymilian Sielicki
Amadou Sall
Nick Hodges
George Kalpakas
Gui Seek
Edric Chan
Igor Minar
Sonu Kapoor
Keen Yee Liau
Trung Vo
Ajit Singh
Charles Lyding
David Shevitz 🔵
Paul Gschwendtner
Tony Bove
Alan Agius
Jesse Lucas
Kishan Gajera
Moritz Obermeier
rch850
JiaLiPassion
Stewart Rand
Stephen Fluin
Mike Huang
Gerald Lang
Greg Magolan
Andrew Scott
Joey Perrott
thefliik
crisbeto
Kapunahele Wong
Sonu Kapoor
cexbrayat
Kara Erickson