This change makes `getPreviousOrParentTNode` return `TNode|null` (rather
than just `TNode`) which is more reflective of the reality. The
`getPreviousOrParentTNode` can be `null` upon entering the `LView`.
PR Close#38707
`TNodeType.View` was created to support inline views. That feature did
not materialize and we have since removed the instructions for it, leave
an unneeded `TNodeType.View` which was still used in a very
inconsistent way. This change no longer created `TNodeType.View` (and
there will be a follow up chang to completely remove it.)
Also simplified the mental model so that `LView[HOST]`/`LView[T_HOST]`
always point to the insertion location of the `LView`.
PR Close#38707
Host `TNode` was passed into `getOrCreateTNode` just so that we can
compute weather or not we are a root node. This was needed because
`previousOrParentTNode` could have `TNode` from `TView` other then
current `TView`. This is confusing mental model. Previous change
ensured that `previousOrParentTNode` must always be part of `TView`,
which enabled this change to remove the unneeded argument.
PR Close#38707
`previousOrParentTNode` stores current `TNode`. Due to inconsistent
implementation the value stored would sometimes belong to the current
`TView` and sometimes to the parent. We have extra logic which accounts
for it. A better solution is to just ensure that `previousOrParentTNode`
always belongs to current `TNode`. This simplifies the mental model
and cleans up some code.
PR Close#38707
Even in the overloads, state that it can accept `null` and
`undefined`, in order to ensure easy composition with `async`.
Additionally, change the implementation to return `null` on an
`undefined` input, for consistency with other pipes.
BREAKING CHANGE:
The `slice` pipe now returns `null` for the `undefined` input value,
which is consistent with the behavior of most pipes. If you rely on
`undefined` being the result in that case, you now need to check for it
explicitly.
PR Close#37447
As shown in the tests, `KeyValuePipe.transform` can accept
`undefined`, in which case it always returns `null`.
Additionally, the typing for `string` keys can be made generic, so the
comparison function is only required to accept the relevant cases.
Finally, the typing for `number` records now shows that the comparison
function and the result entries will actually receive the string version
of the numeric keys, just as shown in the tests.
BREAKING CHANGE:
The typing of the `keyvalue` pipe has been fixed to report that for
input objects that have `number` keys, the result will contain the
string representation of the keys. This was already the case and the
code has simply been updated to reflect this. Please update the
consumers of the pipe output if they were relying on the incorrect
types. Note that this does not affect use cases where the input values
are `Map`s, so if you need to preserve `number`s, this is an effective
way.
PR Close#37447
I18nPluralPipe can actually accept `null` and `undefined` (which are
convenient for composing it with the async pipe), but it is currently
typed to only accept `number`.
PR Close#37447
Make typing of number pipes stricter to catch some misuses (such as
passing an Observable or an array) at compile time.
BREAKING CHANGE:
The signatures of the number pipes now explicitly state which types are
accepted. This should only cause issues in corner cases, as any other
values would result in runtime exceptions.
PR Close#37447
Make typing of DatePipe stricter to catch some misuses (such as passing
an Observable or an array) at compile time.
BREAKING CHANGE:
The signature of the `date` pipe now explicitly states which types are
accepted. This should only cause issues in corner cases, as any other
values would result in runtime exceptions.
PR Close#37447
`AsyncPipe.transform` will never return `undefined`, even when passed
`undefined` in input, in contrast with what was declared in the
overloads.
Additionally the "actual" method signature can be updated to match the
most generic case, since the implementation does not rely on wrappers
anymore.
BREAKING CHANGE:
The async pipe no longer claims to return `undefined` for an input that
was typed as `undefined`. Note that the code actually returned `null` on
`undefined` inputs. In the unlikely case you were relying on this,
please fix the typing of the consumers of the pipe output.
PR Close#37447
The old implementation of case conversion types can handle several
values which are not strings, but the signature did not reflect this.
The new one reports errors when falsy non-string inputs are given to
the pipe (such as `false` or `0`) and has a new signature which
instead reflects the behaviour on `null` and `undefined`.
Fixes#36259
BREAKING CHANGE:
The case conversion pipes no longer let falsy values through. They now
map both `null` and `undefined` to `null` and raise an exception on
invalid input (`0`, `false`, `NaN`) just like most "common pipes". If
your code required falsy values to pass through, you need to handle them
explicitly.
PR Close#37447
For the following example, the cursor is between `keySpan` and `valueSpan`
of the `BoundAttribute`.
```html
<test-cmp [foo]¦="bar"></test-cmp>
```
Our hybrid visitor will return `Element`in this case, which is the parent
node of the `BoundAttribute`.
This is because we only look at the `keySpan` and `valueSpan`, and not
the source span. The last element in the AST path is `Element`, so it gets
returned.
In this PR, I propose fixing this by adding a sentinel value `undefined`
to the AST path to signal that we've found a source span but the cursor is
neither in the key span nor the value span.
PR Close#38995
Now that we have `keySpan` for `BoundAttribute` (implemented in
https://github.com/angular/angular/pull/38898) we could do the same
for `Variable`.
This would allow us to distinguish the LHS and RHS from the whole source
span.
PR Close#38965
Prior to this change, each invocation of `loadStandardTestFiles` would
load the necessary files from disk. This function is typically called
at the top-level of a test module in order to share the result across
tests. The `//packages/compiler-cli/test/ngtsc` target has 8 modules
where this call occurs, each loading their own copy of
`node_modules/typescript` which is ~60MB in size, so the memory overhead
used to be significant. This commit loads the individual packages into
a standalone `Folder` and mounts this folder into the filesystem of
standard test files, such that all file contents are no longer
duplicated in memory.
PR Close#38909
Some compiler tests take a long time to run, even using multiple
executors. A profiling session revealed that most time is spent in
parsing source files, especially the default libraries are expensive to
parse.
The default library files are constant across all tests, so this commit
introduces a shared cache of parsed source files of the default
libraries. This achieves a significant improvement for several targets
on my machine:
//packages/compiler-cli/test/compliance: from 23s to 5s.
//packages/compiler-cli/test/ngtsc: from 115s to 11s.
Note that the number of shards for the compliance tests has been halved,
as the extra shards no longer provide any speedup.
PR Close#38909
`router.navigateByUrl` and `router.createUrlTree` only use a subset of the `NavigationExtras`. This commit
changes the parameter type to use new interfaces that only specify the properties used by
those function implementations. `NavigationExtras` extends both of those interfaces.
Fixes#18798
BREAKING CHANGE: While the new parameter types allow a variable of type
`NavigationExtras` to be passed in, they will not allow object literals,
as they may only specify known properties. They will also not accept
types that do not have properties in common with the ones in the `Pick`.
To fix this error, only specify properties from the `NavigationExtras` which are
actually used in the respective function calls or use a type assertion
on the object or variable: `as NavigationExtras`.
PR Close#38227
We are changing the default value from 'legacy' to 'corrected' so that new
applications are automatically opted-in to the corrected behavior from #22394.
BREAKING CHANGE: This commit changes the default value of
`relativeLinkResolution` from `'legacy'` to `'default'`. If your
application previously used the default by not specifying a value in the
`ExtraOptions` and uses relative links when navigating from children of
empty path routes, you will need to update your `RouterModule` to
specifically specify `'legacy'` for `relativeLinkResolution`.
See https://angular.io/api/router/ExtraOptions#relativeLinkResolution
for more details.
PR Close#25609
The keySpan in bound attributes provides more fine-grained location information and can be used
to disambiguate multiple bound attributes in a single microsyntax binding. Previously,
this case could not distinguish between the two different attributes because
the sourceSpans were identical and valueSpans would not match if the cursor
was located in a key.
PR Close#38955
Close#38334.
zone.js provides a flag DISABLE_WRAPPING_UNCAUGHT_PROMISE_REJECTION to let zone.js
throw the original error instead of wrap it when uncaught promise rejection found.
But the rejection value could be anything includes primitive value such as number.
In that case, we should not attach any additional properties to the value.
PR Close#38476
In Ivy, template type-checking has 3 modes: basic, full, and strict. The
primary difference between basic and full modes is that basic mode only
checks the top-level template, whereas full mode descends into nested
templates (embedded views like ngIfs and ngFors). Ivy applies this approach
to all of its template type-checking, including the DOM schema checks which
validate whether an element is a valid component/directive or not.
View Engine has both the basic and the full mode, with the same distinction.
However in View Engine, DOM schema checks happen for the full template even
in the basic mode.
Ivy's behavior here is technically a "fix" as it does not make sense for
some checks to apply to the full template and others only to the top-level
view. However, since g3 relies exclusively on the basic mode of checking and
developers there are used to DOM checks applying throughout their template,
this commit re-enables the nested schema checks even in basic mode only in
g3. This is done by enabling the checks only when Closure Compiler
annotations are requested.
Outside of g3, it's recommended that applications use at least the full mode
of checking (controlled by the `fullTemplateTypeCheck` flag), and ideally
the strict mode (`strictTemplates`).
PR Close#38943
The default value for `relativeLinkResolution` is changing from 'legacy' to 'corrected'.
This migration updates `RouterModule` configurations that use the default value to
now specifically use 'legacy' to prevent breakages when updating.
PR Close#38698
Though we currently have the knowledge of where the `key` for an
attribute binding appears during parsing, we do not propagate this
information to the output AST. This means that once we produce the
template AST, we have no way of mapping a template position to the key
span alone. The best we can currently do is map back to the
`sourceSpan`. This presents problems downstream, specifically for the
language service, where we cannot provide correct information about a
position in a template because the AST is not granular enough.
PR Close#38898
There is an inconsistency in overrideProvider behaviour. Testing documentation says
(https://angular.io/guide/testing-components-basics#createcomponent) that all override...
methods throw error if TestBed is already instantiated. However overrideProvider doesn't throw any error, but (same as
other override... methods) doesn't replace providers if TestBed is instantiated. Add TestBed instantiation check to
overrideProvider method to make it consistent.
BREAKING CHANGE:
If you call `TestBed.overrideProvider` after TestBed initialization, provider overrides are not applied. This
behavior is consistent with other override methods (such as `TestBed.overrideDirective`, etc) but they
throw an error to indicate that, when the check was missing in the `TestBed.overrideProvider` function.
Now calling `TestBed.overrideProvider` after TestBed initialization also triggers an
error, thus there is a chance that some tests (where `TestBed.overrideProvider` is
called after TestBed initialization) will start to fail and require updates to move `TestBed.overrideProvider` calls
before TestBed initialization is completed.
Issue mentioned here: https://github.com/angular/angular/issues/13460#issuecomment-636005966
Documentation: https://angular.io/guide/testing-components-basics#createcomponent
PR Close#38717
This commit introduces a new option for the service worker, called
`navigationRequestStrategy`, which adds the possibility to force the service worker
to always create a network request for navigation requests.
This enables the server redirects while retaining the offline behavior.
Fixes#38194
PR Close#38565
This commit refactors the `ExpressionTranslatorVisitor` so that it
is not tied directly to the TypeScript AST. Instead it uses generic
`TExpression` and `TStatement` types that are then converted
to concrete types by the `TypeScriptAstFactory`.
This paves the way for a `BabelAstFactory` that can be used to
generate Babel AST nodes instead of TypeScript, which will be
part of the new linker tool.
PR Close#38775
Previously each identifier was being imported individually, which made for a
very long import statement, but also obscurred, in the code, which identifiers
came from the compiler.
PR Close#38775
This file contains a number of classes making it long and hard to work with.
This commit splits the `ImportManager`, `Context` and `TypeTranslatorVisitor`
classes, along with associated functions and types into their own files.
PR Close#38775
When the target of the compiler is ES2015 or newer then we should
be generating `let` and `const` variable declarations rather than `var`.
PR Close#38775
Using an interface makes the code cleaner and more readable.
This change also adds the `range` property to the type to be used
for source-mapping.
PR Close#38775
The cast to `ts.Identifier` was a hack that "just happened to work".
The new approach is more robust and doesn't have to undermine
the type checker.
PR Close#38775
Let's say we have a code like
```html
<div<span>123</span>
```
Currently this gets parsed into a tree with the element tag `div<span`.
This has at least two downsides:
- An incorrect diagnostic that `</span>` doesn't close an element is
emitted.
- A consumer of the parse tree using it for editor services is unable to
provide correct completions for the opening `<span>` tag.
This patch attempts to fix both issues by instead parsing the code into
the same tree that would be parsed for `<div></div><span>123</span>`.
In particular, we do this by optimistically scanning an open tag as
usual, but if we do not notice a terminating '>', we mark the tag as
"incomplete". A parser then emits an error for the incomplete tag and
adds a synthetic (recovered) element node to the tree with the
incomplete open tag's name.
What's the downside of this? For one, a breaking change.
<ol>
<li>
The first breaking change is that `<` symbols that are ambiguously text
or opening tags will be parsed as opening tags instead of text in
element bodies. Take the code
```html
<p>a<b</p>
```
Clearly we cannot have the best of both worlds, and this patch chooses
to swap the parsing strategy to support the new feature. Of course, `<`
can still be inserted as text via the `<` entity.
</li>
</ol>
Part of #38596
PR Close#38681
This commit re-enables some tests that were temporarily disabled on Windows,
as they failed on native Windows CI. The Windows filesystem emulation has
been corrected in an earlier commit, such that the original failure would
now also occur during emulation on Linux CI.
PR Close#37782
In native windows, the drive letter is a capital letter, while our Windows
filesystem emulation would use lowercase drive letters. This difference may
introduce tests to behave differently in native Windows versus emulated
Windows, potentially causing unexpected CI failures on Windows CI after a PR
has been merged.
Resolves FW-2267
PR Close#37782
NG_VALUE_ACCESSOR is a multi injection token, users can and
should expect more than one ControlValueAccessor to be
available (and this is how it is used in @angular/forms).
This is now reflected in the definition of the injection token
by typing it as an array of ControlValueAccessor. The motivating
reason is that using the programmatic Injector api will now
type Injector#get correspondingly.
fixes#29351
BREAKING CHANGES
NG_VALUE_ACCESSOR is now typed as a readonly array rather than
a mutable scalar. It is used as a multi injection token and as
such it should always be expected that more than one accessor
may be returned.
PR Close#29723
The logic for computing identifiers, specifically for bound attributes
can be simplified by using the value span of the binding rather than the
source span.
PR Close#38899
The current tests print out the span numbers, which are really difficult to verify
since it requires manually going to the template string and looking at what
characters appear within those indexes. The better humanization would be
to use the toString method of the spans, which prints the span text itself
PR Close#38902
Currently, when we call jsonp method without importing HttpClientJsonpModule, an error message appears saying
'Attempted to construct Jsonp request without JsonpClientModule installed.' instance of 'Attempted to
construct Jsonp request without HttpClientJsonpModule installed.'
PR Close#38756
This commit updates several import statements in the core package to decrease the number of
cycles detected by the dependency checker tool.
PR Close#38805
Close#38795
in the XMLHttpRequest patch, when get `readystatechange` event, zone.js try to
invoke `load` event listener first, then call `invokeTask` to finish the
`XMLHttpRequest::send` macroTask, but if the request failed because the
server can not be reached, the `load` event listener will not be invoked,
so the `invokeTask` of the `XMLHttpRequest::send` will not be triggered either,
so we will have a non finished macroTask there which will make the Zone
not stable, also memory leak.
So in this PR, if the `XMLHttpRequest.status = 0` when we get the `readystatechange`
event, that means something wents wrong before we reached the server, we need to
invoke the task to finish the macroTask.
PR Close#38836
Misko Hevery
Andrea Canciani
Keen Yee Liau
JoostK
Andrew Scott
Dirk Luijk
Andrew Scott
JiaLiPassion
Joey Perrott
Alex Rickabaugh
Adrian Rutkowski
klemenoslaj
Pete Bacon Darwin
Ayaz Hafiz
Ingo Bürk
Prashant Tholia
Marley Powell
William Koza
Andrew Kushnir
Sonu Kapoor