Update the supported range of node versions for to be less restrictive, no longer causing
yarn or npm to fail engine's checks for future versions of node.
While this change will no longer cause yarn or npm to fail these engine's check, this does
not reflect a change in the officially supported versions of node for Angular. Angular
continues to maintain support for Active LTS and Maintenance LTS versions of node.
PR Close#42205
Remove publishConfig property from the package.json entry for each of the entries in
the publish configuration. Using the wombat proxy is now ensured/managed by the
ng-dev release tooling.
PR Close#42104
`global` property is not available in the browser, previously this was polyfilled through `core-js`. This now fails with `global is not defined`, since global cannot be accessed when not defined.
PR Close#41739
This commit reverts commit [_fix(service-worker): handle error with
ErrorHandler_](https://github.com/angular/angular/pull/39990/commits/552419d).
With Angular v11.0.4 and commit [_fix(service-worker): handle error with
ErrorHandler_](https://github.com/angular/angular/pull/39990/commits/552419d)
Angular start to send all service worker registration errors to the Angular
standard `ErrorHandler#handleError()` interface, instead of logging them in the
console.
But users existing `ErrorHandler#handleError()` implementations are not adapted
to service worker registration errors and it might result in broken apps or
bad UI.
Passing to `ErrorHandler` is desirable for some and undesirable for others and
the same is true for passing to `console.error()`.
But `console.error()` was used for a long time and thus it is preferable to keep
it as long as a good solution is not found with `ErrorHandler`.
Right now it's hard to define a good solution for `ErrorHandler` because:
1. Given the nature of the SW registration errors (usually outside the control
of the developer, different error messages on each browser/version, often
quite generic error messages, etc.), passing them to the `ErrorHandler` is
not particularly helpful.
2. While `ErrorHandler#handleError()` accepts an argument of type `any` (so
theoretically we could pass any object without changing the public API), most
apps expect an `Error` instance, so many apps could break if we changed the
shape.
3. Ideally, the Angular community want to re-think the `ErrorHandler` API
and add support for being able to pass additional metadata for each error
(such as the source of the error or some identifier, etc.). This change,
however, could potentially affect many apps out there, so the community must
put some thought into it and design it in a way that accounts for the needs
of all packages (not just the SW).
4. Given that we want to more holistically revisit the `ErrorHandler` API, any
changes we make in the short term to address the issue just for the SW will
make it more difficult/breaky for people to move to a new API in the future.
To see the whole explanation see GitHub PR #40236.
PR Close#40236
Previously, the SW would wait to become idle before executing scheduled
tasks (including checks for newer app versions). It was considered idle
when it hadn't received any request for at least 5 seconds. As a result,
if the app performed polling (i.e. sent requests to the server) in a
shorter than 5 seconds interval, the SW would never detect and update to
a newer app version.
Related issue: #40207
This commit fixes this by adding a max delay to `IdleScheduler` to
ensure that no scheduled task will remain pending for longer than the
specified max delay.
PR Close#40234
This commit refactors `Driver#deleteAllCaches()` to use `Array#map()`
instead of `Array#reduce()` for running async operations in parallel.
This allows avoiding having to recursively wrap Promises with
`Promise.all()`.
PR Close#40234
Previously, clients were notified about updates sequentially. This
wasn't necessary.
This commit changes the `Driver#notifyClientsAboutUpdate()` method to
notify the clients in parallel (by switching from `Array#reduce()` to
`Array#map()` and `Promise.all()`).
This also aligns the `notifyClientsAboutUpdate()` method with the
`notifyClientsAboutUnrecoverableState()` method.
PR Close#40234
Previously, the `Driver#notifyClientsAboutUnrecoverableState()` method
would not wait for the completion of the promises created to notify the
clients. Theoretically, this could result in the SW instance's getting
destroyed by the browser before all clients have been notified. This is
extremely unlikely to happen in practice, since the async operations are
very quick, but it _is_ theoretically possible.
This commit ensures that the SW instance will remain alive while
notifying the clients by making `notifyClientsAboutUnrecoverableState()`
await the notification promises.
PR Close#40234
Since 5be4edfa17, a failing cache-busted
network request (such as requests for fetching uncached assets) will
cause the ServiceWorker to incorrectly enter a degraded
`EXISTING_CLIENTS_ONLY` mode. A failing network request could be caused
by many reasons, including the client or server being offline, and does
not necessarily signify a broken ServiceWorker state.
This commit fixes the logic in `cacheBustedFetchFromNetwork()` to
correctly handle errors in network requests.
For more details on the problem and the implemented fix see #39775.
Fixes#39775
PR Close#39786
This commit introduces a new option for the service worker, called
`navigationRequestStrategy`, which adds the possibility to force the service worker
to always create a network request for navigation requests.
This enables the server redirects while retaining the offline behavior.
Fixes#38194
PR Close#38565
In several occasions it has been observed when the browser has evicted
eagerly cached assets from the cache and which can also not be found on the
server anymore. This can lead to broken state where only parts of the application
will load and others will fail.
This commit fixes this issue by checking for the missing asset in the cache
and on the server. If this condition is true, the broken client will be
notified about the current state through the `UnrecoverableStateError`.
Closes#36539
PR Close#36847
Previously, the condition to make the cache busted was executing although
the network request was successful. However, this is not valid. The cache
should only be marked as busted when the request failed. This commit fixes
the invalid condition.
PR Close#36847
The Chrome debugger is not able to render the syntax properly when the
code contains backticks. This is a known issue in Chrome and they have an
open [issue](https://bugs.chromium.org/p/chromium/issues/detail?id=659515) for that.
This commit adds the work-around to use double backslash with one
backtick ``\\` `` at the end of the line.
This can be reproduced by running the following command:
`yarn bazel test //packages/forms/test --config=debug`
When opening the chrome debugger tools, you should see the correct
code highlighting syntax.
PR Close#38332
Some ServiceWorker operations and methods require normalized URLs.
Previously, the generic `string` type was used.
This commit introduces a new `NormalizedUrl` type, a special kind of
`string`, to make this requirement explicit and use the type system to
enforce it.
PR Close#37922
In some cases, it is useful to use a relative base href in the app (e.g.
when an app has to be accessible on different URLs, such as on an
intranet and the internet - see #25055 for a related discussion).
Previously, the Angular ServiceWorker was not able to handle relative
base hrefs (for example when building the with `--base-href=./`).
This commit fixes this by normalizing all URLs from the ServiceWorker
configuration wrt the ServiceWorker's scope.
Fixes#25055
PR Close#37922
This is in preparation of enabling the ServiceWorker to handle
relative paths in `ngsw.json` (as discussed in #25055), which will
require normalizing URLs in other parts of the ServiceWorker.
PR Close#37922
The Angular ServiceWorker can serve requests to a special virtual path,
`ngsw/state`, showing [information about its internal state][1], which
can be useful for debugging.
Previously, this would only work if the ServiceWorker's [scope][2] was
the root directory (`/`). Otherwise, (e.g. when building the app with
`--baseHref=/some/path/`), the ServiceWorker would fail to detect a
request to `/some/path/ngsw/state` as matching `ngsw/state` and would
not serve it with the debugging information.
This commit fixes it by ensuring that the ServiceWorker's scope is taken
into account when detecting a request to `ngsw/state`.
[1]: https://angular.io/guide/service-worker-devops#locating-and-analyzing-debugging-information
[2]: https://developer.mozilla.org/en-US/docs/Web/API/ServiceWorkerRegistration/scopeFixes#30505
PR Close#37922
Refactors the `ng_rollup_bundle` rule to a macro that relies on
the `@bazel/rollup` package. This means that the rule no longer
deals with custom ESM5 flavour output, but rather only builds
prodmode ES2015 output. This matches the common build output
in Angular projects, and optimizations done in CLI where
ES2015 is the default optimization input.
The motiviation for this change is:
* Not duplicating rollup Bazel rules. Instead leveraging the official
rollup rule.
* Not dealing with a third TS output flavor in Bazel.The ESM5 flavour has the
potential of slowing down local development (as it requires compilation replaying)
* Updating the rule to be aligned with current CLI optimizations.
This also _fixes_ a bug that surfaced in the old rollup bundle rule.
Code that is unused, is not removed properly. The new rule fixes this by
setting the `toplevel` flag. This instructs terser to remove unused
definitions at top-level. This matches the optimization applied in CLI
projects. Notably the CLI doesn't need this flag, as code is always
wrapped by Webpack. Hence, the unused code eliding runs by default.
PR Close#37623
The default value was changed from `registerWhenStable` to
`registerWhenStable:30000` in 29e8a64cf0,
but the decumentation was not updated to reflect that.
This commit updates the documentation to mention the correct default
value.
PR Close#37555
**Problem**
After #31109 and #31865, it's still possible to get locked in state
`EXISTING_CLIENTS_ONLY`, without any possibility to get out (even by
pushing new updates on the server).
More specifically, if control doc `/latest` of `ngsw:/:db:control` once
gets a bad value, then the service worker will fail early, and won't be
able to overwrite `/latest` with new, valid values (the ones from future
updates).
For example, once in this state, URL `/ngsw/state` will show:
NGSW Debug Info:
Driver state: EXISTING_CLIENTS_ONLY (Degraded due to failed initialization: Invariant violated (initialize): latest hash 8b75… has no known manifest
Error: Invariant violated (initialize): latest hash 8b75… has no known manifest
at Driver.<anonymous> (https://my.app/ngsw-worker.js:2302:27)
at Generator.next (<anonymous>)
at fulfilled (https://my.app/ngsw-worker.js:175:62))
Latest manifest hash: 8b75…
Last update check: 22s971u
... with hash `8b75…` corresponding to no installed version.
**Solution**
Currently, when such a case happens, the service worker [simply fails
with an assertion][1]. Because this failure happens early, and is not
handled, the service worker is not able to update `/latest` to new
installed app versions.
I propose to detect this corrupted case (a `latest` hash that doesn't
match any installed version) a few lines above, so that the service
worker can correctly call its [already existing cleaning code][2].
[1]: https://github.com/angular/angular/blob/3569fdf/packages/service-worker/worker/src/driver.ts#L559-L563
[2]: https://github.com/angular/angular/blob/3569fdf/packages/service-worker/worker/src/driver.ts#L505-L519
This change successfully fixes the problem described above.
Unit test written with the help of George Kalpakas. Thank you!
PR Close#37453
Due to an outage with the proxy we rely on for publishing, we need
to temporarily directly publish to NPM using our own angular
credentials again.
PR Close#37378
Tslib version is bound to the TypeScript version used to compile the library. Thus, we shouldn't list `tslib` as a `peerDependencies`. This is because, a user can install libraries which have been compiled with older versions of TypeScript and thus require multiple `tslib` versions to be installed.
Reference: TOOL-1374 and TOOL-1375
Closes: #37188
PR Close#37198
We can remove all of the entry point resolution configuration from the package.json
in our source code as ng_package rule adds the properties automatically and correctly
configures them.
This change simplifies our code base but doesn't have any impact on the package.json
in the distributed npm_packages.
PR Close#36944
The Angular ServiceWorker always uses a copy of the request without
headers for caching assets (in order to avoid issues with opaque
responses). Therefore, it was previously not possible to retrieve
resources from the cache if the response contained [Vary](https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Vary) headers.
In addition to that, `Vary` headers do not work in all browsers (or work
differently) and may not work as intended with ServiceWorker caches. See
[this article](https://www.smashingmagazine.com/2017/11/understanding-vary-header) and the linked resources for more info.
This commit avoids the aforementioned issues by making sure the Angular
ServiceWorker always sets the `ignoreVary` option passed to
[Cache#match()](https://developer.mozilla.org/en-US/docs/Web/API/Cache/match) to `true`. This allows the ServiceWorker to correctly
retrieve cached responses with `Vary` headers, which was previously not
possible.
Fixes#36638
BREAKING CHANGE:
Previously, [Vary](https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Vary)
headers would be taken into account when retrieving resources from the
cache, completely preventing the retrieval of cached assets (due to
ServiceWorker implementation details) and leading to unpredictable
behavior due to inconsistent/buggy implementations in different
browsers.
Now, `Vary` headers are ignored when retrieving resources from the
ServiceWorker caches, which can result in resources being retrieved even
when their headers are different. If your application needs to
differentiate its responses based on request headers, please make sure
the Angular ServiceWorker is [configured](https://angular.io/guide/service-worker-config)
to avoid caching the affected resources.
PR Close#34663
Previously it was not possible to provide `CacheQueryOptions` ([MDN](https://developer.mozilla.org/en-US/docs/Web/API/Cache)) for querying the Cache.
This commit introduces a new parameter called `cacheQueryOptions` for `DataGroup` and `AssetGroup`.
Currently only `ignoreSearch` is supported as `ignoreVary` and `ignoreMethod` would require using
the complete Request object for matching which is not possible with the current implementation.
Closes#28443
PR Close#34663
1. update jasmine to 3.5
2. update @types/jasmine to 3.5
3. update @types/jasminewd2 to 2.0.8
Also fix several cases, the new jasmine 3 will help to create test cases correctly,
such as in the `jasmine 2.x` version, the following case will pass
```
expect(1 == 2);
```
But in jsamine 3, the case will need to be
```
expect(1 == 2).toBeTrue();
```
PR Close#34625
Enables the `service-worker` tests on Saucelabs and fixes some issues that were preventing them from running on IE. The issues were:
1. We were serving es2017 code during tests. I've set it to es5.
2. The check which was verifying whether the environment is supported ended up hitting a `require` call in the browser which caused it to fail on browsers that don't support the `URL` API.
PR Close#36129
Previously, some of the built-in ServiceWorker registration strategies,
namely `registerWithDelay:<timeout>` and `registerWhenStable:<timeout>`,
would register potentially long-running timeout, thus preventing the app
from stabilizing before the timeouts expired. This was especially
problematic for the `registerWhenStable:<timeout>` strategy, which waits
for the app to stabilize, because the strategy itself would prevent the
app from stabilizing and thus the ServiceWorker would always be
registered after the timeout.
This commit fixes this by subscribing to the registration strategy
observable outside the Angular zone, thus not affecting the app's
stabilization.
PR Close#35870
Previously, when using the default ServiceWorker registration strategy
Angular would wait indefinitely for the [app to stabilize][1], before
registering the ServiceWorker script. This could lead to a situation
where the ServiceWorker would never be registered when there was a
long-running task (such as an interval or recurring timeout).
Such tasks can often be started by a 3rd-party dependency (beyond the
developer's control or even without them realizing). In addition, this
situation is particularly hard to detect, because the ServiceWorker is
typically not used during development and on production builds a
previous ServiceWorker instance might be already active.
This commit fixes this by changing the default registration strategy
from `registerWhenStable` to `registerWhenStable:30000`, which will
ensure that the ServiceWorker will be registered after 30s at the
latest, even if the app has not stabilized by then.
Fixes#34464
PR Close#35870
Previously, when using the `registerWhenStable` ServiceWorker
registration strategy (which is also the default) Angular would wait
indefinitely for the [app to stabilize][1], before registering the
ServiceWorker script. This could lead to a situation where the
ServiceWorker would never be registered when there was a long-running
task (such as an interval or recurring timeout).
Such tasks can often be started by a 3rd-party dependency (beyond the
developer's control or even without them realizing). In addition, this
situation is particularly hard to detect, because the ServiceWorker is
typically not used during development and on production builds a
previous ServiceWorker instance might be already active.
This commit enhances the `registerWhenStable` registration strategy by
adding support for an optional `<timeout>` argument, which guarantees
that the ServiceWorker will be registered when the timeout expires, even
if the app has not stabilized yet.
For example, with `registerWhenStable:5000` the ServiceWorker will be
registered as soon as the app stabilizes or after 5 seconds if the app
has not stabilized by then.
Related to #34464.
[1]: https://angular.io/api/core/ApplicationRef#is-stable-examples
PR Close#35870
ts-api-guardian uses `require.resolve` to resolve the actual and golden files under bazel. In Windows for these files to be resolved correct the full path including the workspace name as per the MANIFEST entries is required.
This used to be the case until the recent changes done to use npm_integration tests
83c74ceacf/tools/public_api_guard/public_api_guard.bzl (L19)83c74ceacf/tools/public_api_guard/public_api_guard.bzl (L28)
```
bazel test //packages/... --test_tag_filters=api_guard
//packages/animations:animations_api (cached) PASSED in 18.4s
//packages/common:common_api (cached) PASSED in 25.5s
//packages/compiler-cli:compiler_options_api (cached) PASSED in 12.4s
//packages/compiler-cli:error_code_api (cached) PASSED in 11.6s
//packages/core:core_api (cached) PASSED in 20.6s
//packages/core:ng_global_utils_api (cached) PASSED in 13.5s
//packages/elements:elements_api (cached) PASSED in 11.9s
//packages/forms:forms_api (cached) PASSED in 13.9s
//packages/http:http_api (cached) PASSED in 14.8s
//packages/localize:localize_api (cached) PASSED in 6.3s
//packages/platform-browser:platform-browser_api (cached) PASSED in 18.1s
//packages/platform-browser-dynamic:platform-browser-dynamic_api (cached) PASSED in 14.0s
//packages/platform-server:platform-server_api (cached) PASSED in 13.9s
//packages/platform-webworker:platform-webworker_api (cached) PASSED in 13.7s
//packages/platform-webworker-dynamic:platform-webworker-dynamic_api (cached) PASSED in 11.7s
//packages/router:router_api (cached) PASSED in 19.9s
//packages/service-worker:service-worker_api (cached) PASSED in 18.1s
//packages/upgrade:upgrade_api (cached) PASSED in 13.5s
```
Reference: DEV-71
PR Close#36034
Moves the public api .d.ts files from tools/public_api_guard to
goldens/public-api.
Additionally, provides a README in the goldens directory and a script
assist in testing the current state of the repo against the goldens as
well as a command for accepting all changes to the goldens in a single
command.
PR Close#35768
Switches our tslint setup to the standard `tslint.json` linter excludes.
The set of files that need to be linted is specified through a Yarn script.
For IDEs, open files are linted with the closest tslint configuration, if the
tslint IDE extension is set up, and the source file is not excluded.
We cannot use the language service plugin for tslint as we have multiple nested
tsconfig files, and we don't want to add the plugin to each tsconfig. We
could reduce that bloat by just extending from a top-level tsconfig that
defines the language service plugin, but unfortunately the tslint plugin does
not allow the use of tslint configs which are not part of the tsconfig project.
This is problematic since the tslint configuration is at the project root, and we
don't want to copy tslint configurations next to each tsconfig file.
Additionally, linting of `d.ts` files has been re-enabled. This has been
disabled in the past and a TODO has been left. This commit fixes the
lint issues and re-enables linting.
PR Close#35800
Joey Perrott
Alan Agius
Kristiyan Kostadinov
Hoel IRIS
George Kalpakas
Christoph Guttandin
Marcono1234
klemenoslaj
Sonu Kapoor
Paul Gschwendtner
Adrien Vergé
Igor Minar
Maximilian Koeller
JiaLiPassion
Joey Perrott
Felix Becker