The Material units tests job has been disabled with the
typescript upgrade PR since the components repository was
still on an old TypeScript version (due to cyclic dependencies
between the framework and components repository).
Since the components repository has been updated to `9.0.0-next.15`
and now uses the compatible TypeScript version, we can re-enable
ds
Related to this change, we need to ignore the `package.json`
engines when installing the dependencies of the components repo. This
is because the components repo already updated to NodeJS v12 and Yarn
v1.19.1. This is not the case for the CI setup of framework. For now,
since we don't want to change the dev setup (as it slows down
development), we temporarily disable the engines.
Additionally, the material unit tests job now depends on the actual
release packages (not on the ngtsc compiled ones). This is because
the components repo setup relies on NGCC being run. This is also
helpful for validating ngcc against the framework packages.
PR Close#33530
Previously, when one wanted to try out the changes from a PR before it
was merged, they had to check out the PR locally and build the Angular
packages themselves (which is time-consuming and wasteful given that the
packages have already been built on CI).
This commit persists all Angular packages on each build as `.tgz` files,
which can be used to install dependencies on an project (supported by
both [npm][1] and [yarn][2]). In addition to individual `.tgz` files for
each package, a `.tgz` file including all packages is also stored, which
can be used to test the packages locally by overwriting the ones in the
`node_modules/` directory of a project.
CircleCI [build artifacts][3] an be used for longer-term storage of the
outputs of a build and are designed to be useful around the time of the
build, which suits our needs.
[1]: https://docs.npmjs.com/cli/install.html
[2]: https://yarnpkg.com/lang/en/docs/cli/add
[3]: https://circleci.com/docs/2.0/artifacts
PR Close#33321
The `payload-size.sh` script is mainly used on CI to calculate, check
and potentially save (on non-PR builds) the sizes of the bundles for
various apps (including angular.io). If everything goes well (i.e. the
checks pass, meaning that the sizes did not increase above the specified
threshold) nothing is shown in the CI logs.
In some cases, it is useful to be able to see what the sizes were in a
specific build; e.g. for debugging purposes or when investigating a
gradual increase that happened over time. (Some of this info is
available on https://size.angular.io/, but not all.)
Previously, the only way to find out what the sizes were for a specific
build was to checkout the corresponding commit locally and build the
target app, which in turn requires building all Angular packages and can
take some time. Given that the sizes are already calculated on CI, this
was a waste.
This commit makes it easy to find out the bundle sizes for a specific
build/commit by always printing out the calculated sizes (thus making
them show up in the CI logs).
PR Close#33099
Updates the `material-unit-test` job to run tests against
the latest commit of the Angular Components repository.
The components repository updated to rules_nodejs#0.38.2 before Angular Bazel did.
To do this, the `@angular/bazel` v0.38.2 compatibility changes were patched on postinstall.
This now conflicts because we install a `@angular/bazel` version in the `material-unit-tests` job
that already includes these compatibility changes. This would result in the patch being a noop
for which the `patch` command throws an error.
We can remove this once components can install a released version of `@angular/bazel` that is
compatible with `rules_nodejs#0.38.2`.
PR Close#33073
The components repository updated to rules_nodejs#0.38.0 before Angular Bazel did.
To do this, the `@angular/bazel` v0.38.0 compatibility changes were patched on postinstall.
This now conflicts because we install a `@angular/bazel` version in the `material-unit-tests` job
that already includes these compatibility changes. This would result in the patch being a noop
for which the `patch` command throws an error.
We can remove this once components can install a released version of `@angular/bazel` that is
compatible with `rules_nodejs#0.38.0`.
PR Close#32889
Ensures that the `material-unit-tests` job does not accidentally build
subpackages of the `src/dev-app` in the components repo. This is now
an issue because the components repository updated their dev-app
to use Bazel with more individual subpackages. These subpackages
are not excluded by the `--deleted_packages` flag.
For best practice, we should use the exclusion target pattern
instead of the undocumented `--deleted_packages` flag anyway.
PR Close#32485
The commit range that is associated with a CI build is used for a couple
of things (mostly related to payload-size tracking):
- Determine whether a size change was caused by application code or
dependencies (or both).
- Add the messages of the commits associated with the build (and thus
the payload-size change).
NOTE: The commit range is only used on push builds.
Previously, the commit range was computed based on the
`CIRCLE_COMPARE_URL` environment variable. With [CircleCI Pipelines][1]
enabled, `CIRCLE_COMPARE_URL` is no longer available and the commit
range cannot be reliably detected.
This commit switches `CI_COMMIT_RANGE` to only include the last commit.
This can be less accurate in some rare cases, but is true in the
majority of cases (on push builds). Additionally, it stores the CircleCI
build URL in the database along with the payload data, so the relevant
info can be retrieved when needed.
[1]: https://circleci.com/docs/2.0/build-processing
PR Close#32537
This commit changes the Angular compiler (ivy-only) to generate `$localize`
tagged strings for component templates that use `i18n` attributes.
BREAKING CHANGE
Since `$localize` is a global function, it must be included in any applications
that use i18n. This is achieved by importing the `@angular/localize` package
into an appropriate bundle, where it will be executed before the renderer
needs to call `$localize`. For CLI based projects, this is best done in
the `polyfills.ts` file.
```ts
import '@angular/localize';
```
For non-CLI applications this could be added as a script to the index.html
file or another suitable script file.
PR Close#31609
Whenever someone tries to commit (by running `git commit` directly or
indirectly), a `commit-msg` git hook is run to validate the commit
message. If the validation fails, an error message is printed and the
commit is aborted.
Occasionally, people may have written a non-trivial commit message which
could turn out to be invalid (due a small typo for example). In that
case, it is frustrating to "lose" the whole message and have to write it
all over again (from memory). This is frustrating and has happened to me
enough times to finally seek a solution.
Fortunately, it turns out that git stores the last commit message in
`.git/COMMIT_EDITMSG`, so it is easy to get it back (as long as you know
where to look for it). This commit mentions this info in the validation
error to help people that might not know about it.
(This issue is probably mostly relevant for people using git from the
command-line and not through a UI, but it won't hurt in either case.)
PR Close#32420
Ivy snapshots no longer contain metadata.json which breaks the detection logic for
Angular Package Format (APF) in npm/yarn install.
This PR adds ANGULAR_PACAKGE as a magic file to denote APF.
See https://github.com/bazelbuild/rules_nodejs/issues/927
PR Close#31900
Initially the blocklist has been removed because there were
no remaining disabled tests that failed. Also the blocklist
logic didn't work anymore because the `material-unit-tests` CI
job now runs against `angular/components#master` with Bazel.
388578fec9 tried to revert the removal
of the blocklist in favor of a new upcoming breaking change with
HammerJS, but the revert doesn't help since the blocklist still
doesn't work with Bazel.
In order to make the blocklist work with the unit tests running
with Bazel, a PR has been submitted on the components repository.
See: https://github.com/angular/components/pull/16833.
This commit updates the blocklist logic on the framework side to
work with the new logic on the components repo side.
PR Close#32239
Initially when the `material-unit-tests` job got wired up,
Ivy was not really backwards-compatible and a few bugs caused
test failures when running the Angular Material test suites w/ Ivy.
These bugs got fixed progressively and eventually the test
blocklist became empty. At this point we don't want to regress
in the future and the blocklist should never have new items.
Additionally since we switched the unit-tests job to run against
Angular Material `master` with Bazel, the blocklist is no
longer respected. Therefore we can safely remove the blocklist.
PR Close#32138
No longer locks the Material unit tests job to a specific branch, but rather allows
locking to a specific commit from a given branch. This allows us to use the
"master" branch from the `components` repository.
PR Close#31569
Previously, the ivy-2019 branch of the Material (aka components) repo was
used, which contains some changes that were necessary to work with Ivy.
These changes are not longer necessary, as Material's master branch is
fully working with Ivy today. To be up-to-date with recent Material
development and its support for more recent dependencies, e.g. TypeScript,
it is desirable for us to be on a newer version of Material.
This commit moves the Material tests away from the ivy-2019 branch, to a
recent commit on master. We are not targeting the master branch itself,
as that would introduce a moving target into Angular's CI checks, which
is undesirable.
Lastly, the usage of gulp to run Material's tests is changed into using
Bazel, as Material itself is now also built with Bazel.
PR Close#31569
Payload size tracking was temporarily disabled in #31057, due to
`CIRCLE_COMPARE_URL` stopping being available. It turned out this was
related to turning on the new [Pipelines][1] feature, which was required
for testing Windows on CircleCI.
Since then, we have turned `Pipelines` off and got `CIRCLE_COMPARE_URL`
back (e.g. see [build 362971][2]). According to CircleCI, failing to
populate `CIRCLE_COMPARE_URL` with `Pipelines` on is a bug and they are
working on fixing it.
[1]: https://circleci.com/docs/2.0/build-processing/
[2]: https://circleci.com/gh/angular/angular/362971Fixes#31121
PR Close#31138
The `CIRCLE_COMPARE_URL` is not available in builds any more since we
enabled `Pipelines` on CircleCI. We have contected CircleCI, but until
this is solved we cannot get the commit range and thus disabling
uploading of payload size data to avoid broken builds.
PR Close#31057
Currently it's not possible to run the `./scripts/build-packages-dist.sh` script on Windows because
`bazel query` returns CRLF line-endings which result on array expansion in Bazel target names
that end with a carriage return (e.g. `//packages/core\r`). This then results in a build failure where
Bazel complains that target names should not end with a carriage return.
In order to fix this, we just strip off the carriage return line-endings from the bazel query stdout. Ideally
the script will be ported to a plain Node script eventually, but for now it prevents Windows users from
building the release packages and the simple workaround seems reasonable and sufficient.
PR Close#30853
Previously we had to share code between upgrade/dynamic and upgrade/static
by symlinking the `src` folder, which allowed both packages to access
the upgrade/common files.
These symlinks are always problematic on Windows, where we had to run
a script to re-link them, and restore them.
This change uses Bazel packages to share the `upgrade/common` code,
which avoids the need for symlinking the `src` folder.
Also, the Windows specific scripts that fixup the symlinks have also
been removed as there is no more need for them.
PR Close#29466
Currently with the release of "8.0.0-beta.10", the Bazel npm packag accidentally
was stamped with an incorrect version placeholder: `8.0.0-beta.10+1.sha-a28b3e3`.
This can happen because the placeholder is based on latest tag that matches the
Semver format. e.g. if `HEAD` equals to the commit that has the latest tag, the
version name will be correct and refer to the tag name (e.g. `8.0.0-beta.10`). Though
if the latest commit is not tagged with the most recent tag, the version
name will also include the SHA of the commit (e.g. `8.0.0-beta.10+1.sha-a28b3e3`).
We can ensure that we don't accidentally release versions from a more recent commit
that shouldn't be part of the release by adding a pre-release check that ensures that
the `BUILD_SCM_VERSION` Bazel status variable matches the expected version format.
PR Close#29551
Currently we cache the Material `node_modules` after
the `run_angular_material_unit_tests.sh` completed. This
means that the cache will incorrectly contain the Ivy NPM
package output which might be incompatible with the
other Material dependencies. e.g. the Material postinstall
command now uses a different NGC version that does not
work with the `typescript` version that has been specified in
the Material project.
PR Close#29416
Currently when `sauce-connect` times out after 2min, we just
print a message saying that the SauceLabs tunnel didn't establish
within 2min. In order to make debugging easier, we now print the
full log file output on failure.
PR Close#29084
* No longer builds the example e2e tests using "tsc". The examples are now built with Bazel and can therefore be built with Ivy by using the `--define=compile=aot` switch.
* No longer runs the example e2e tests using the protractor CLI. example e2e tests are executed with the Bazel protractor rule and can therefore run incrementally.
NOTE: Unit tests found within the examples are still running within the legacy jobs.
PR Close#28402
Adds a check to verify that each PR branch to be merged upstream contains SHAs of commits that significantly changed our CI infrastructure.
This check is used to enforce that we don't merge PRs that have not been rebased recently and could result in merging of non-approved or otherwise bad changes.
PR Close#28250
Moving the tests over to CircleCI in pretty much "as-is" state just so that we can drop the dependency on Travis.
In the followup changes we plan to migrate these tests to run on sauce under bazel. @gregmagolan is working on that.
I've previously verified that all the tests executed in legacy-unit-tests-local already under bazel.
Therefore the legacy-unit-tests-local job is strictly not necessary any more, but given how flaky legacy-unit-tests-saucelabs is,
it is good to have the -local job just so that we can quickly determine if any failure is a flake or legit issue
(the bazel version of these tests could theoretically run in a slightly different way and fail or not fail in a different way, so having -lcoal job is just an extra safety check).
This change was coauthored with @devversion
PR Close#27937
the polymer benchmarks are super old and not relevant any more
and these benchmarks were the only reason why we needed bower at all
so long, bower. thanks for all the fish.
PR Close#27931
Previously the logging to TravisCI has been disabled because the `print-logs.sh` file printed the Sauce-Connect logfile output that is `verbose` by default. See [for example](https://travis-ci.org/angular/angular/jobs/250578973).
Since the default stdout/stderr of sauce-connect is pretty much concise and can alert us if we run into any issues (e.g. rate limit, outdated tunnel version), we should stop piping these to `/dev/null`.
PR Close#27657
Joey Perrott
Paul Gschwendtner
George Kalpakas
Greg Magolan
Pete Bacon Darwin
Keen Yee Liau
Kara Erickson
JoostK
Jason Aden
Ben Lesh
Filipe Silva
Igor Minar
Matias Niemelä
Jeremy Elbourn