Changes `isWithinPackage` to take an `AbsoluteFsPath` instead of `ts.SourceFile`,
to allow for an upcoming change to use it when no `ts.SourceFile` is available,
but just a path.
PR Close#37596
Previously, event listeners for component output events attached on an
Angular custom element before inserting it into the DOM (i.e. before
instantiating the underlying component) didn't fire for events emitted
during initialization lifecycle hooks, such as `ngAfterContentInit`,
`ngAfterViewInit`, `ngOnChanges` (initial call) and `ngOnInit`.
The reason was that `NgElementImpl` [subscribed to events][1] _after_
calling [ngElementStrategy#connect()][2], which is where the
[initial change detection][3] takes place (running the initialization
lifecycle hooks).
This commit fixes this by:
1. Ensuring `ComponentNgElementStrategy#events` is defined and available
for subscribing to, even before instantiating the component.
2. Changing `NgElementImpl` to subscribe to `NgElementStrategy#events`
(if available) before calling `NgElementStrategy#connect()` (which
initializes the component instance) if available.
3. Falling back to the old behavior (subscribing to `events` after
calling `connect()` for strategies that do not initialize `events`
before their `connect()` is run).
NOTE:
By falling back to the old behavior when `NgElementStrategy#events` is
not initialized before calling `NgElementStrategy#connect()`, we avoid
breaking existing custom `NgElementStrategy` implementations (with
@remackgeek's [ElementZoneStrategy][4] being a commonly used example).
Jira issue: [FW-2010](https://angular-team.atlassian.net/browse/FW-2010)
[1]: c0143cb2ab/packages/elements/src/create-custom-element.ts (L167-L170)
[2]: c0143cb2ab/packages/elements/src/create-custom-element.ts (L164)
[3]: c0143cb2ab/packages/elements/src/component-factory-strategy.ts (L158)
[4]: f1b6699495/projects/elements-zone-strategy/src/lib/element-zone-strategy.tsFixes#36141
PR Close#37570
Previously an error thrown in the `analyzeFn` would cause
the ngcc process to exit immediately without removing the
lockfile, and potentially before the unlocker process had been
successfully spawned resulting in the lockfile being orphaned
and left behind.
Now we catch these errors and remove the lockfile as needed.
PR Close#37739
Invoking a callback registered through `ViewRef.onDestroy` throws an error, because we weren't registering it correctly in the internal data structure. These changes also remove the `storeCleanupFn` function, because it was mostly identical to `storeCleanupWithContext` and was only used in one place.
Fixes#36213.
PR Close#37543
Special DI tokens like `ChangeDetectorRef` and `ElementRef` can provide a factory via `NG_ELEMENT_ID`. The problem is that we were reading it off the token as `token[NG_ELEMENT_ID]` which will go up the prototype chain if it couldn't be found on the current token, resulting in the private `ViewRef` API being exposed, because it extends `ChangeDetectorRef`.
These changes fix the issue by guarding the property access with `hasOwnProperty`.
Fixes#36235.
PR Close#37574
Verify that HTML parsing is supported in addition to DOMParser existence.
This maybe wasn't as important before when DOMParser was used just as a
fallback on Firefox, but now that DOMParser is the default choice, we need
to be more accurate.
PR Close#36578
The `inertDocument` member is only needed when using the InertDocument
strategy. By separating the DOMParser and InertDocument strategies into
separate classes, we can easily avoid creating the inert document
unnecessarily when using DOMParser.
PR Close#36578
If [innerHTML] is used in a component and a Content-Security-Policy is set
that does not allow inline styles then Firefox and Chrome show the following
message:
> Content Security Policy: The page’s settings observed the loading of a
resource at self (“default-src”). A CSP report is being sent.
This message is caused because Angular is creating an inline style tag to
test for a browser bug that we use to decide what sanitization strategy to
use, which causes CSP violation errors if inline CSS is prohibited.
This test is no longer necessary, since the `DOMParser` is now safe to use
and the `style` based check is redundant.
In this fix, we default to using `DOMParser` if it is available and fall back
to `createHTMLDocument()` if needed. This is the approach used by DOMPurify
too.
The related unit tests in `html_sanitizer_spec.ts`, "should not allow
JavaScript execution when creating inert document" and "should not allow
JavaScript hidden in badly formed HTML to get through sanitization (Firefox
bug)", are left untouched to assert that the behavior hasn't changed in
those scenarios.
Fixes#25214.
PR Close#36578
This commit fixes a bug whereby the language service would incorrectly
return HTML elements if autocomplete is requested for an unknown symbol.
This is because we walk through every possible scenario, and fallback to
element autocomplete if none of the scenarios match.
The fix here is to return results from interpolation if we know for sure
we are in a bound text. This means we will now return an empty results if
there is no suggestions.
This commit also refactors the code a little to make it easier to
understand.
PR Close#37518
This commit replaces an assert with more descriptive error message that is thrown in case `<ng-template>` or `<ng-container>` is used as host element for a Component.
Resolves#35240.
PR Close#35916
The shims_for_IE.js file contains vendor code that predates the third_party
directory. This file is currently used for internal karma testing setup. This
change corrects this by moving the shims_for_IE file to //third_part/
PR Close#37624
`getExternalFiles()` is an API that could optionally be provided by a tsserver plugin
to notify the server of any additional files that should belong to a particular project.
This API was removed in https://github.com/angular/angular/pull/34260 mainly
due to performance reasons.
However, with the introduction of "solution-style" tsconfig in typescript 3.9,
the Angular extension could no longer reliably detect the owning Project solely
based on the ancestor tsconfig.json. In order to support this use case, we have
to reinstate `getExternalFiles()`.
Fixes https://github.com/angular/vscode-ng-language-service/issues/824
PR Close#37750
Adds the publishConfig registry value to the package.json of the
@angular/benchpress package to publish it via wombat rather than
through npm directly.
PR Close#37752
This commit disables all diagnostic tests for DynamicValue diagnostics which
make assertions about the diagnostic filename while running tests on Windows.
Such assertions are currently suffering from a case sensitivity issue.
PR Close#37763
Several partial_evaluator tests in the diagnostics_spec check assert
correctness of diagnostic filenames. Previously these assertions compared
a resolved (`absoluteFrom`) filename with the TypeScript `ts.SourceFile`'s
`fileName` string, which caused the tests to fail on Windows because the
drive letter case differed.
This commit changes the assertions to use `absoluteFromSourceFile` instead
of the `fileName` string, resulting in an apples-to-apples comparison of
canonicalized paths.
PR Close#37758
Currently when bootstrapped component is being removed using `ComponentRef.destroy` or `NgModuleRef.destroy` methods, DOM nodes may be retained in the DOM tree. This commit fixes that problem by always attaching host element of the internal root view to the component's host view node, so the cleanup can happen correctly.
Resolves#36449.
PR Close#37600
In version 10.0.0-next.8, we introduced absolute URL support for
server-based HTTP requests, so long as the fully-resolved URL was
provided in the initial config. However, doing so represents a
breaking change for users who already have their own interceptors
to model this functionality, since our logic executes before all
interceptors fire on a request. See original PR #37071.
Therefore, we introduce a flag to make this change consistent with
v9 behavior, allowing users to opt in to this new behavior. This
commit also fixes two issues with the previous implementation:
1. if the server was initiated with a relative URL, the absolute
URL construction would fail because needed components were empty
2. if the user's absolute URL was on a port, the port would not
be included
PR Close#37539
As of v10, the `undecorated-classes-with-decorated-fields` migration
generally deals with undecorated classes using Angular features. We
intended to run this migation as part of v10 again as undecorated
classes with Angular features are no longer supported in planned v11.
The migration currently behaves incorrectly in some cases where an
`@Injectable` or `@Pipe` decorated classes uses the `ngOnDestroy`
lifecycle hook. We incorrectly add a TODO for those classes. This
commit fixes that.
Additionally, this change makes the migration more robust to
not migrate a class if it inherits from a component, pipe
injectable or non-abstract directive. We previously did not
need this as the undecorated-classes-with-di migration ran
before, but this is no longer the case.
Last, this commit fixes an issue where multiple TODO's could be
added. This happens when multiple Angular CLI build targets have
an overlap in source files. Multiple programs then capture the
same source file, causing the migration to detect an undecorated
class multiple times (i.e. adding a TODO twice).
Fixes#37726.
PR Close#37732
This commit introduces a dedicated `DynamicValue` kind to indicate that a value
cannot be evaluated statically as the function body is not just a single return
statement. This allows more accurate reporting of why a function call failed
to be evaluated, i.e. we now include a reference to the function declaration
and have a tailor-made diagnostic message.
PR Close#37587
During AOT compilation, the value of some expressions need to be known at
compile time. The compiler has the ability to statically evaluate expressions
the best it can, but there can be occurrences when an expression cannot be
evaluated statically. For instance, the evaluation could depend on a dynamic
value or syntax is used that the compiler does not understand. Alternatively,
it is possible that an expression could be statically evaluated but the
resulting value would be of an incorrect type.
In these situations, it would be helpful if the compiler could explain why it
is unable to evaluate an expression. To this extend, the static interpreter
in Ivy keeps track of a trail of `DynamicValue`s which follow the path of nodes
that were considered all the way to the node that causes an expression to be
considered dynamic. Up until this commit, this rich trail of information was
not surfaced to a developer so the compiler was of little help to explain
why static evaluation failed, resulting in situations that are hard to debug
and resolve.
This commit adds much more insight to the diagnostic that is produced for static
evaluation errors. For dynamic values, the trail of `DynamicValue` instances
is presented to the user in a meaningful way. If a value is available but not
of the correct type, the type of the resolved value is shown.
Resolves FW-2155
PR Close#37587
Previously, an anonymous type was used for creating a diagnostic with related
information. The anonymous type would then be translated into the necessary
`ts.DiagnosticRelatedInformation` shape within `makeDiagnostic`. This commit
switches the `makeDiagnostic` signature over to taking `ts.DiagnosticRelatedInformation`
directly and introduces `makeRelatedInformation` to easily create such objects.
This is done to aid in making upcoming work more readable.
PR Close#37587
Commit 4213e8d5 introduced shim reference tagging into the compiler, and
changed how the `TypeCheckProgramHost` worked under the hood during the
creation of a template type-checking program. This work enabled a more
incremental flow for template type-checking, but unintentionally introduced
several regressions in performance, caused by poor incrementality during
`ts.Program` creation.
1. The `TypeCheckProgramHost` was made to rely on the `ts.CompilerHost` to
retrieve instances of `ts.SourceFile`s from the original program. If the
host does not return the original instance of such files, but instead
creates new instances, this has two negative effects: it incurs
additional parsing time, and it interferes with TypeScript's ability to
reuse information about such files.
2. During the incremental creation of a `ts.Program`, TypeScript compares
the `referencedFiles` of `ts.SourceFile` instances from the old program
with those in the new program. If these arrays differ, TypeScript cannot
fully reuse the old program. The implementation of reference tagging
introduced in 4213e8d5 restores the original `referencedFiles` array
after a `ts.Program` is created, which means that future incremental
operations involving that program will always fail this comparison,
effectively limiting the incrementality TypeScript can achieve.
Problem 1 exacerbates problem 2: if a new `ts.SourceFile` is created by the
host after shim generation has been disabled, it will have an untagged
`referencedFiles` array even if the original file's `referencedFiles` was
not restored, triggering problem 2 when creating the template type-checking
program.
To fix these issues, `referencedFiles` arrays are now restored on the old
`ts.Program` prior to the creation of a new incremental program. This allows
TypeScript to get the most out of reusing the old program's data.
Additionally, the `TypeCheckProgramHost` now uses the original `ts.Program`
to retrieve original instances of `ts.SourceFile`s where possible,
preventing issues when a host would otherwise return fresh instances.
Together, these fixes ensure that program reuse is as incremental as
possible, and tests have been added to verify this for certain scenarios.
An optimization was further added to prevent the creation of a type-checking
`ts.Program` in the first place if no type-checking is necessary.
PR Close#37641
Previously the `ProgramBasedEntryPointFinder` was parsing all the
entry-points referenced by the program for dependencies even if all the
entry-points had been processed already.
Now this entry-point finder will re-use the `EntryPointManifest` to load
the entry-point dependencies when possible which avoids having to parse
them all again, on every invocation of ngcc.
Previously the `EntryPointManifest` was only used in the
`DirectoryWalkerEntryPointFinder`, which also contained the logic for
computing the contents of the manifest. This logic has been factored out
into an `EntryPointCollector` class. Both the `ProgramBasedEntryPointFinder`
and `DirectoryWalkerEntryPointFinder` now use the `EntryPointManifest` and
the `EntryPointCollector`.
The result of this change is that there is a small cost on the first run of
ngcc to compute and store the manifest - the processing takes 102% of the
processing time before this PR. But on subsequent runs there is a
significant benefit on subsequent runs - the processing takes around 50%
of the processing time before this PR.
PR Close#37665
This tool, which can be run from the node_modules bin folder, can parse
the source files in your compiled app and generate a translation file
formatted with the configured syntax.
For example:
```
./node_modules/.bin/localize-extract -s 'dist/**/*.js' -f xliff1 -o dist/messages.en.xlf
```
PR Close#32912
Previously source locations required an ending position but this was not
being computed effectively. Now ending position is optional and it is
computed from an `endPath` passed to `getLocation()`.
PR Close#32912
Source-maps can be linked to from a source-file by a comment at
the end of the file.
Previously the `SourceFileLoader` would read
the first comment that matched `//# sourceMappingURL=` but
this is not valid since some bundlers may include embedded
source-files that contain such a comment.
Now we only look for this comment in the last non-empty line
in the file.
PR Close#32912
Previously localized strings were not mapped to their original
source location, so it was not possible to back-trace them
in tools like the i18n message extractor.
PR Close#32912
Webpack and other build tools sometimes inline the contents of the
source files in their generated source-maps, and at the same time
change the paths to be prefixed with a protocol, such as `webpack://`.
This can confuse tools that need to read these paths, so now it is
possible to provide a mapping to where these files originated.
PR Close#32912
This method will allow us to find the original location given a
generated location, which is useful in fine grained work with
source-mapping. E.g. in `$localize` tooling.
PR Close#32912
Date pipe is giving wrong week number when used with the date format 'w'. If first week(according to Iso) has some days in previous year
Fixes#33961
PR Close#37632
Previously, `registerOnChange` used `hasOwnProperty` to identify if the
property is supported. However, this does not work as the `selectedOptions`
property is an inherited property. This commit fixes this by verifying
the property on the prototype instead.
Closes#37433
PR Close#37620
introduce a boolean to track form groups/arrays own pending async validation to distinguish between pending state due to children and pending state due to own validation
Fixes#10064
PR Close#22575
Value of "undefined" passed as segment in routerLink is stringified to string "undefined".
This change introduces the same behavior for value of "null".
PR Close#32616
When using the routerLinkActive directive inside a component that is using ChangeDetectionStrategy.OnPush and lazy loaded module routes the routerLinkActive directive does not update after clicking a link to a lazy loaded route that has not already been loaded.
Also the OnPush nav component does not set routerLinkActive correctly when the default route loads, the non-OnPush nav component works fine.
regression caused by #15943closes#19934
PR Close#21411
Updates the version of `@angular/benchpress` to the next patch
version. i.e. `v0.2.1`. Additionally, the peer dependency
on `@angular/core` has been updated to be satisifed with
Angular v10 and v11.
Benchpress should be at least compatibe with the next two major
versions as it does not rely on any deprecated API from `@angular/core`.
PR Close#37676
Removes unused packages from the benchpress `package.json`. That
helps with deduping dependencies, and avoiding unused code
being downloaded.
PR Close#37676
The file-writing error in the this commit can also be the result
of the ngcc process dying in the middle of writing files.
This commit improves the error message to offer a resolution
in case this is the reason for the error.
Fixes#36393
PR Close#37672
Error message mention that ngModel and ngModelChange will be removed in Angular v7 but right not now sure when it will be removed so changed it to a future version
PR Close#37643
The `SourceFile` and associated code is general and reusable in
other projects (such as `@angular/localize`). Moving it to `ngtsc`
makes it more easily shared.
PR Close#37114
The `Logger` interface and its related classes are general purpose
and could be used by other tooling. Moving it into ngtsc is a more
suitable place from which to share it - similar to the FileSystem stuff.
PR Close#37114
Interestingly enough, our rollup bundle optimization pipeline
did not work properly before 1b827b058e5060963590628d4735e6ac83c6dfdd.
Unused declarations were not elided because build optimizer did not
consider the Angular packages as side-effect free. Build optimizer has
a hard-coded list of Angular packages that are considered side-effect
free. Though this one did not match in the old version of the rollup
bundle rule, as internal sources were resolved through their resolved
bazel-out paths. Hence build optimizer could not detect the known
Angular framework packages. Now though, since we leverage the
Bazel-idiomatic `@bazel/rollup` implementation, sources are resolved
through linked `node_modules`, and build optimizer is able to properly
detect files as side-effect free.
PR Close#37623
The language-service package currently sets the `module` `package.json`
property and refers to a folder called `fesm5`. The language-service
though does not build with `ng_package` so this folder never existed.
Now with APF v10, ng package would not generate this folder either.
We should just remove the property as the primary entry-point is
the UMD bundle resolved through `main`. There is no module flavour
exposed to the NPM package as `pkg_npm` uses the named AMD module
devmode output that doesn't work for `module`.
PR Close#37623
It looks like there is a leftover golden in the `ng_package`
tests that is no longer used anywhere and does not reflect
the latest Angular Package Format v10 changes. We should be
able to remove it to keep our codebase healthy.
PR Close#37623
Refactors the `ng_rollup_bundle` rule to a macro that relies on
the `@bazel/rollup` package. This means that the rule no longer
deals with custom ESM5 flavour output, but rather only builds
prodmode ES2015 output. This matches the common build output
in Angular projects, and optimizations done in CLI where
ES2015 is the default optimization input.
The motiviation for this change is:
* Not duplicating rollup Bazel rules. Instead leveraging the official
rollup rule.
* Not dealing with a third TS output flavor in Bazel.The ESM5 flavour has the
potential of slowing down local development (as it requires compilation replaying)
* Updating the rule to be aligned with current CLI optimizations.
This also _fixes_ a bug that surfaced in the old rollup bundle rule.
Code that is unused, is not removed properly. The new rule fixes this by
setting the `toplevel` flag. This instructs terser to remove unused
definitions at top-level. This matches the optimization applied in CLI
projects. Notably the CLI doesn't need this flag, as code is always
wrapped by Webpack. Hence, the unused code eliding runs by default.
PR Close#37623
Adds the `LinkablePackageInfo` to the `ng_module` rule. This allows
the linker to properly link `ng_module` targets in Node runtime
actions. Currently this does not work properly and packages like
`@angular/core` are not linked, so we cannot rely on the linker.
9a5de3728b/internal/linker/link_node_modules.bzl (L144-L146).
PR Close#37623
As of Angular Package Format v10, we no longer ship a `fesm5` and
`fesm5` output in packages. We made this change to the `ng_package`
rule but intentionally did not clean up related build actions.
This follow-up commit cleans this up by:
* No longer building fesm5 bundles, or providing esm2015 output.
* No longer requesting and building a third flavor for ESM5. We can
use TSC to downlevel ES2015 sources/prodmode output similarly to how it
is done in `ng-packagr`.
The third output flavor (ESM5) resulted in a build slow-down as we
required a full recompilation of sources. Now, we only have a single
compilation for prodmode output, and then downlevel it on-demand
to ES5 for the UMD bundles. Here is timing for building the release
packages in `angular/angular` before this change, and afterwards:
* Before: 462.157s = ~7.7min
* After: 339.703s = ~5.6min
This signifies a time reduction by 27% when running
`./scripts/build/build-packages-dist.sh`.
PR Close#37623
This dependency host tokenizes files to identify all the imported
paths. This commit calculates the last place in the source code
where there can be an import path; it then exits the tokenization
when we get to this point in the file.
Testing with a reasonably large project showed that the tokenizer
spends about 2/3 as much time scanning files. For example in a
"noop" hot run of ngcc using the program-based entry-point
finder the percentage of time spent in the `scan()` function of
the TS tokenizer goes down from 9.9% to 6.6%.
PR Close#37639
The ContentChildren decorator has a metadata property named "read" which
can be used to read a different token from the queried elements. The
documentation incorrectly says "True to read..." when it should say
"Used to read...".
PR Close#37626
For URLs that use auxiliary route outlets in the second or following path segments,
when removing the auxiliary route segment, parenthesis remain for the primary outlet segment.
This causes the following error when trying to reload an URL: "Cannot match any route".
The commit adds a check for this scenario, serializing the URL as "a/b" instead of "a/(b)".
PR Close#24656
PR Close#37163
In routerLink if a fragment is added than fragment example shows that it is added before the params '/user/bob#education?debug=true' but actually they are added after that '/user/bob?debug=true#education' changed documentation to show correct example
Fixes#18630
PR Close#37590
This feature is aimed at development tooling that has to translate
production build inputs into their devmode equivalent. The current
process involves guessing the devmode filename based on string
replace patterns. This allows consuming build actions to read the
known mappings instead.
This is a change in anticipation of an update to the general
Typescript build rules to consume this data.
PR Close#36262
The method was previously looping through all controls, even after finding at least one that
satisfies the provided condition. This can be a bottleneck with large forms. The new version
of the method returns as soon as a single control which conforms to the condition is found.
PR Close#32534
We recently added a transformer to NGC that is responsible for downleveling Angular
decorators and constructor parameter types. The primary goal was to mitigate a
TypeScript limitation/issue that surfaces in Angular projects due to the heavy
reliance on type metadata being captured for DI. Additionally this is a pre-requisite
of making `tsickle` optional in the Angular bazel toolchain.
See: 401ef71ae5 for more context on this.
Another (less important) goal was to make sure that the CLI can re-use
this transformer for its JIT mode compilation. The CLI (as outlined in
the commit mentioned above), already has a transformer for downleveling
constructor parameters. We want to avoid this duplication and exported
the transform through the tooling-private compiler entry-point.
Early experiments in using this transformer over the current one, highlighted
that in JIT, class decorators cannot be downleveled. Angular relies on those
to be invoked immediately for JIT (so that factories etc. are generated upon loading)
The transformer we exposed, always downlevels such class decorators
though, so that would break CLI's JIT mode. We can address the CLI's
needs by adding another flag to skip class decorators. This will allow
us to continue with the goal of de-duplication.
PR Close#37545
Commit 24b2f1da2b introduced an `NgCompiler` which operates on a
`ts.Program` independently of the `NgtscProgram`. The NgCompiler got its
`IncrementalDriver` (for incremental reuse of Angular compilation results)
by looking at a monkey-patched property on the `ts.Program`.
This monkey-patching operation causes problems with the Angular indexer
(specifically, it seems to cause the indexer to retain too much of prior
programs, resulting in OOM issues). To work around this, `IncrementalDriver`
reuse is now handled by a dedicated `IncrementalBuildStrategy`. One
implementation of this interface is used by the `NgtscProgram` to perform
the old-style reuse, relying on the previous instance of `NgtscProgram`
instead of monkey-patching. Only for `NgTscPlugin` is the monkey-patching
strategy used, as the plugin sits behind an interface which only provides
access to the `ts.Program`, not a prior instance of the plugin.
PR Close#37339
The default value was changed from `registerWhenStable` to
`registerWhenStable:30000` in 29e8a64cf0,
but the decumentation was not updated to reflect that.
This commit updates the documentation to mention the correct default
value.
PR Close#37555
In `a ? b.~{cursor}`, the LS will provide the symbols in the scope of the current template, because the `path.tail` is `falseExp` whose value is `EmptyExpr`, and the span of `falseExp` is wider than the `trueExp`, so the value of `path` should be narrowed.
PR Close#37505
This feature is aimed at development tooling that has to translate
production build inputs into their devmode equivalent. The current
process involves guessing the devmode filename based on string
replace patterns. This allows consuming build actions to read the
known mappings instead.
This is a change in anticipation of an update to the general
Typescript build rules to consume this data.
PR Close#36262
This checks for a Bazel flag in `ng_module()` in the `_renderer` attribute
which specifies the renderer to use for the build.
The main advantage of this flag is that it can be overridden with [Bazel
transitions](https://docs.bazel.build/versions/master/skylark/config.html),
giving much more flexibility for migrating individual applications in a
Bazel workspace to Ivy.
This flag is not intended to replace `--config ivy` or
`--define angular_ivy_enabled=True` (although it technically could). As a
result, this flag is not and will not actually be used anywhere in the
`angular/angular` repo. Instead, a `string_flag()` is provided internally
which sets the renderer via a transition. See http://cl/315749946.
Note that this does **not** introduce a dependency on Skylib for
`angular/angular`. The dependency isn't actually necessary because
`BuildSettingInfo` is not used externally anyways. By doing this, it is not
necessary for downstream, external workspaces to depend on Skylib.
PR Close#37529
Historically files to be formatted were added to a listing (via matchers)
to be included in formatting. Instead, this change begins efforts to
instead include all files in format enforcement, relying instead on an
opt out methodology.
PR Close#36940
Currently the partial evaluator isn't able to resolve a variable declaration that uses destructuring in the form of `const {value} = {value: 0}; const foo = value;`. These changes add some logic to allow for us to resolve the variable's value.
Fixes#36917.
PR Close#37497
This PR changes the logic for determining when to skip route processing from
using the URL of the last attempted navigation to the actual resulting URL after
that transition.
Because guards may prevent navigation and reset the browser URL, the raw
URL of the previous transition may not match the actual URL of the
browser at the end of the navigation process. For that reason, we need to use
`urlAfterRedirects` instead.
Other notes:
These checks in scheduleNavigation were added in eb2ceff4ba
The test still passes and, more surprisingly, passes if the checks are removed
completely. There have likely been changes to the navigation handling that
handle the test in a different way. That said, it still appears to be important
to keep the checks there in some capacity because it does affect how many
navigation events occur. This addresses an issue that came up in #16710: https://github.com/angular/angular/issues/16710#issuecomment-634869739
This also partially addresses #13586 in fixing history for imperative
navigations that are cancelled by guards.
PR Close#37408
Previously, ngcc would only be able to match an ngcc configuration to
packages that were located inside the project's top-level
`node_modules/`. However, if there are multiple versions of a package in
a project (e.g. as a transitive dependency of other packages), multiple
copies of a package (at different versions) may exist in nested
`node_modules/` directories. For example, one at
`<project-root>/node_modules/some-package/` and one at
`<project-root>/node_modules/other-package/node_modules/some-package/`.
In such cases, ngcc was only able to detect the config for the first
copy but not for the second.
This commit fixes this by returning a new instance of
`ProcessedNgccPackageConfig` for each different package path (even if
they refer to the same package name). In these
`ProcessedNgccPackageConfig`, the `entryPoints` paths have been
processed to take the package path into account.
PR Close#37040
This commit adds a `packageName` property to the `EntryPoint` interface.
In a subsequent commit this will be used to retrieve the correct ngcc
configuration for each package, regardless of its path.
PR Close#37040
In order to retrieve the ngcc configuration (if any) for an entry-point,
ngcc has to detect the containing package's version.
Previously, ngcc would try to read the version from the entry-point's
`package.json` file, which was different than the package's top-level
`package.json` for secondary entry-points. For example, it would try to
read it from `node_modules/@angular/common/http/package.json` for
entry-point `@angular/common/http`. However, the `package.json` files
for secondary entry-points are not guaranteed to include a `version`
property.
This commit fixes this by first trying to read the version from the
_package's_ `package.json` (falling back to the entry-point's
`package.json`). For example, it will first try to read it from
`@angular/common/package.json` for entry-point `@angular/common/http`.
PR Close#37040
This commit refactors the way info is retrieved from entry-point
`package.json` files to make it easier to extract more info (such as the
package's name) in the future. It also avoids reading and parsing the
`package.json` file multiple times (as was happening before).
PR Close#37040
Rename the `package` property to `packagePath` on the `EntryPoint`
interface. This makes it more clear that the `packagePath` property
holds the absolute path to the containing package (similar to how `path`
holds the path to the entry-point). This will also align with the
`packageName` property that will be added in a subsequent commit.
This commit also re-orders the `EntryPoint` properties to group related
properties together and to match the order of properties on instances
with that on the interface.
PR Close#37040
Previously, when an entry-point was ignored via an ngcc config, ngcc
would scan sub-directories for sub-entry-points, but would not use the
correct `packagePath`. For example, if `@angular/common` was ignored, it
would look at `@angular/common/http` but incorrectly use
`.../@angular/common/http` as the `packagePath` (instead of
`.../@angular/common`). As a result, it would not retrieve the correct
ngcc config for the actual package.
This commit fixes it by ensuring the correct `packagePath` is used, even
if the primary entry-point corresponding to that path is ignored. In
order to do this, a new return value for `getEntryPointInfo()` is added:
`IGNORED_ENTRY_POINT`. This is used to differentiate between directories
that correspond to no or an incompatible entry-point and those that
correspond to an entry-point that could otherwise be valid but is
explicitly ignored. Consumers of `getEntryPointInfo()` can then use this
info to discard ignored entry-points, but still use the correct
`packagePath` when scanning their sub-directories for secondary
entry-points.
PR Close#37040
In the early Zone.js versions (< 0.10.3), `ZoneAwarePromise` did not support `Symbol.species`,
so when user used a 3rd party `Promise` such as `es6-promise`, and try to load the promise library after import of `zone.js`, the loading promise library will overwrite the patched `Promise` from `zone.js` and will break `Promise` semantics with respect to `zone.js`.
Starting with `zone.js` 0.10.3, `Symbol.species` is supported therefore this will not longer be an issue. (https://github.com//pull/34533)
Before 0.10.3, the logic in zone.js tried to handle the case in the wrong way. It did so by overriding the descriptor of `global.Promise`, to allow the 3rd party libraries to override native `Promise` instead of `ZoneAwarePromise`. This is not the correct solution, and since the `Promise.species` is now supported, the 3rd party solution of overriding `global.Promise` is no longer needed.
PR removes the wrong work around logic. (This will improve the bundle size.)
PR Close#36851
Close#36839.
This is a known issue of zone.js,
```
(window as any)[(Zone as any).__symbol__('setTimeout')](() => {
let log = '';
button.addEventListener('click', () => {
Zone.current.scheduleMicroTask('test', () => log += 'microtask;');
log += 'click;';
});
button.click();
expect(log).toEqual('click;microtask;');
done();
});
```
Since in this case, we use native `setTimeout` which is not a ZoneTask,
so zone.js consider the button click handler as the top Task then drain the
microTaskQueue after the click at once, which is not correct(too early).
This case was an edge case and not reported by the users, until we have the
new option ngZoneEventCoalescing, since the event coalescing will happen
in native requestAnimationFrame, so it will not be a ZoneTask, and zone.js will
consider any Task happen in the change detection stage as the top task, and if
there are any microTasks(such as Promise.then) happen in the process, it may be
drained earlier than it should be, so to prevent this situation, we need to schedule
a fake event task and run the change detection check in this fake event task,
so the Task happen in the change detection stage will not be
considered as top ZoneTask.
PR Close#36841
Currently Angular internally already handles `InjectionToken` as
predicates for queries. This commit exposes this as public API as
developers already relied on this functionality but currently use
workarounds to satisfy the type constraints (e.g. `as any`).
We intend to make this public as it's low-effort to support, and
it's a significant key part for the use of light-weight tokens as
described in the upcoming guide: https://github.com/angular/angular/pull/36144.
In concrete, applications might use injection tokens over classes
for both optional DI and queries, because otherwise such references
cause classes to be always retained. This was also an issue in View
Engine, but now with Ivy, this pattern became worse, as factories are
directly attached to retained classes (ultimately ending up in the
production bundle, while being unused).
More details in the light-weight token guide and in: https://github.com/angular/angular-cli/issues/16866.
Closes#21152. Related to #36144.
PR Close#37506
Build-optimizer currently uses TypeScript 3.6 which is unable to resolve an 'accessor' in 'getTypeOfVariableOrParameterOrPropertyWorker'.
Unfortunately, in Build optimizer we cannot update the version of TypeScript because of https://github.com/microsoft/TypeScript/issues/38412
PR Close#37456
Adds @nocollapse to static properties added by ngcc
iff annotateForClosureCompiler is true.
The Closure Compiler will collapse static properties
into the global namespace. Adding this annotation keeps
the properties attached to their respective object, which
allows them to be referenced via a class's constructor.
The annotation is already added by ngtsc and ngc under the
same option, this commit extends the functionality to ngcc.
Closes#36618.
PR Close#36652
There were some examples for 'DoCheck' in the lifeCycle hooks guide. Added a link to the relevant section of the guide in the 'DoCheck()' api docs.
Fixes#35596
PR Close#36574
Zone.js has a lot of optional bundles, such as `zone-patch-message-port`, those
bundles are monkey patch for specified APIs usually for soem experimental APIs or
some old APIs only available for specified platforms. Those bundles will not be
loaded by default.
In this commit, since we have several main `sub packages` such as `zone`, `zone-node`,
`zone-testing`, I put all the optional bundles under `plugins` folders for consistency.
PR Close#36540
Close#35157
In the current version of zone.js, zone.js uses it's own package format, and it is not following the rule
of Angualr package format(APF), so it is not easily to be consumed by Angular CLI or other bundle tools.
For example, zone.js npm package has two bundles,
1. zone.js/dist/zone.js, this is a `es5` bundle.
2. zone.js/dist/zone-evergreen.js, this is a `es2015` bundle.
And Angular CLI has to add some hard-coding code to handle this case, o5376a8b139/packages/schematics/angular/application/files/src/polyfills.ts.template (L55-L58)
This PR upgrade zone.js npm package format to follow APF rule, https://docs.google.com/document/d/1CZC2rcpxffTDfRDs6p1cfbmKNLA6x5O-NtkJglDaBVs/edit#heading=h.k0mh3o8u5hx
The updated points are:
1. in package.json, update all bundle related properties
```
"main": "./bundles/zone.umd.js",
"module": "./fesm2015/zone.js",
"es2015": "./fesm2015/zone.js",
"fesm2015": "./fesm2015/zone.js",
```
2. re-organize dist folder, for example for `zone.js` bundle, now we have
```
dist/
bundles/
zone.js // this is the es5 bundle
fesm2015/
zone.js // this is the es2015 bundle (in the old version is `zone-evergreen.js`)
```
3. have several sub-packages.
1. `zone-testing`, provide zone-testing bundles include zone.js and testing libraries
2. `zone-node`, provide zone.js implemention for NodeJS
3. `zone-mix`, provide zone.js patches for both Browser and NodeJS
All those sub-packages will have their own `package.json` and the bundle will reference `bundles(es5)` and `fesm2015(es2015)`.
4. keep backward compatibility, still keep the `zone.js/dist` folder, and all bundles will be redirected to `zone.js/bundles` or `zone.js/fesm2015` folders.
PR Close#36540
It is quite common for the TS compiler to have to add synthetic
types to function signatures, where the developer has not
explicitly provided them. This results in `import(...)` expressions
appearing in typings files. For example in `@ngrx/data` there is a
class with a getter that has an implicit type:
```ts
export declare class EntityCollectionServiceBase<...> {
...
get store() {
return this.dispatcher.store;
}
...
}
```
In the d.ts file for this we get:
```ts
get store(): Store<import("@ngrx/data").EntityCache>;
```
Given that this file is within the `@ngrx/data` package already,
this caused ngcc to believe that there was a circular dependency,
causing it to fail to process the package - and in fact crash!
This commit resolves this problem by ignoring `import()` expressions
when scanning typings programs for dependencies. This ability was
only introduced very recently in a 10.0.0 RC release, and so it has
limited benefit given that up till now ngcc has been able to process
libraries effectively without it. Moreover, in the rare case that a
package does have such a dependency, it should get picked up
by the sync ngcc+CLI integration point.
PR Close#37503
This commit removes the autocompletion feature for HTML entities.
HTML entites are things like `&`, `<` etc.
There are a few reasons for the decision:
1. It is outside the core functionality of Angular LS
2. The implementation relies on regex, which incurs performance cost
3. There isn't much value if users do not already know which entity
they want to use
4. The list that we provide is not exhaustive
PR Close#37515
In v7 of Angular we removed `tsickle` from the default `ngc` pipeline.
This had the negative potential of breaking ES2015 output and SSR due
to a limitation in TypeScript.
TypeScript by default preserves type information for decorated constructor
parameters when `emitDecoratorMetadata` is enabled. For example,
consider this snippet below:
```
@Directive()
export class MyDirective {
constructor(button: MyButton) {}
}
export class MyButton {}
```
TypeScript would generate metadata for the `MyDirective` class it has
a decorator applied. This metadata would be needed in JIT mode, or
for libraries that provide `MyDirective` through NPM. The metadata would
look as followed:
```
let MyDirective = class MyDir {}
MyDirective = __decorate([
Directive(),
__metadata("design:paramtypes", [MyButton]),
], MyDirective);
let MyButton = class MyButton {}
```
Notice that TypeScript generated calls to `__decorate` and
`__metadata`. These calls are needed so that the Angular compiler
is able to determine whether `MyDirective` is actually an directive,
and what types are needed for dependency injection.
The limitation surfaces in this concrete example because `MyButton`
is declared after the `__metadata(..)` call, while `__metadata`
actually directly references `MyButton`. This is illegal though because
`MyButton` has not been declared at this point. This is due to the
so-called temporal dead zone in JavaScript. Errors like followed will
be reported at runtime when such file/code evaluates:
```
Uncaught ReferenceError: Cannot access 'MyButton' before initialization
```
As noted, this is a TypeScript limitation because ideally TypeScript
shouldn't evaluate `__metadata`/reference `MyButton` immediately.
Instead, it should defer the reference until `MyButton` is actually
declared. This limitation will not be fixed by the TypeScript team
though because it's a limitation as per current design and they will
only revisit this once the tc39 decorator proposal is finalized
(currently stage-2 at time of writing).
Given this wontfix on the TypeScript side, and our heavy reliance on
this metadata in libraries (and for JIT mode), we intend to fix this
from within the Angular compiler by downleveling decorators to static
properties that don't need to evaluate directly. For example:
```
MyDirective.ctorParameters = () => [MyButton];
```
With this snippet above, `MyButton` is not referenced directly. Only
lazily when the Angular runtime needs it. This mitigates the temporal
dead zone issue caused by a limitation in TypeScript's decorator
metadata output. See: https://github.com/microsoft/TypeScript/issues/27519.
In the past (as noted; before version 7), the Angular compiler by
default used tsickle that already performed this transformation. We
moved the transformation to the CLI for JIT and `ng-packager`, but now
we realize that we can move this all to a single place in the compiler
so that standalone ngc consumers can benefit too, and that we can
disable tsickle in our Bazel `ngc-wrapped` pipeline (that currently
still relies on tsickle to perform this decorator processing).
This transformation also has another positive side-effect of making
Angular application/library code more compatible with server-side
rendering. In principle, TypeScript would also preserve type information
for decorated class members (similar to how it did that for constructor
parameters) at runtime. This becomes an issue when your application
relies on native DOM globals for decorated class member types. e.g.
```
@Input() panelElement: HTMLElement;
```
Your application code would then reference `HTMLElement` directly
whenever the source file is loaded in NodeJS for SSR. `HTMLElement`
does not exist on the server though, so that will become an invalid
reference. One could work around this by providing global mocks for
these DOM symbols, but that doesn't match up with other places where
dependency injection is used for mocking DOM/browser specific symbols.
More context in this issue: #30586. The TL;DR here is that the Angular
compiler does not care about types for these class members, so it won't
ever reference `HTMLElement` at runtime.
Fixes#30106. Fixes#30586. Fixes#30141.
Resolves FW-2196. Resolves FW-2199.
PR Close#37382
In #29083 a call to `getCompilerFacade` was added to `ApplicationRef` which pulls in a bit of JIT-specific code. Since the code path that calls the function can't be hit for an AOT-compiled app, these changes add an `ngJitMode` guard which will allow for dead code elimination to drop it completely. Testing it out against a new CLI project showed a difference of ~1.2kb.
PR Close#37372
lifecycle hooks api detailed documentation contained links which were pointing to onChanges hook only which is removed, made each hook point towards its deafult page link
PR Close#36557
Previously the comments for these files referenced a path to "packages/core/src/render3/jit/compiler_facade_interface.ts" that does not exist in the current codebase.
This PR corrects the path in these comments.
PR Close#37370
Previously, we would simply prepend any relative URL with the HREF
for the current route (pulled from document.location). However,
this does not correctly account for the leading slash URLs that
would otherwise be parsed correctly in the browser, or the
presence of a base HREF in the DOM.
Therefore, we use the built-in URL implementation for NodeJS,
which implements the WHATWG standard that's used in the browser.
We also pull the base HREF from the DOM, falling back on the full
HREF as the browser would, to form the correct request URL.
Fixes#37314
PR Close#37341
Prevent duplicate notifications from being emitted when multiple URL change listeners are registered using SpyLocation#onUrlChange.
Use `@internal` annotation for the `_urlChangeSubscription` properties instead of the `private` access modifier. Otherwise, we get in trouble because of `SpyLocation implements Location`.
PR Close#37459
Use the strongly typed TestBed.inject rather than the weakly typed inject test utility function. Reuse injected dependency variables between sibling test cases.
PR Close#37459
Keen and I were talking about what it would take to support getting
references at a position in the current language service, since it's
unclear when more investment in the Ivy LS will be available. Getting TS
references from a template is trivial -- we simply need to get the
definition of a symbol, which is already handled by the language
service, and ask the TS language service to give us the references for
that definition.
This doesn't handle references in templates, but that could be done in a
subsequent pass.
Part of https://github.com/angular/vscode-ng-language-service/issues/29
PR Close#37437
The function signature selection algorithm is totally naive. It'd
unconditionally pick the first signature if there are multiple
overloads. This commit improves the algorithm by returning an exact
match if one exists.
PR Close#37494
Partial resubmit of #26243
Fixes incorrect url tree generation for empty path components with children.
Adds a test to demonstrate the failure of createUrlTree for those routes.
Fixes#13011Fixes#35687
PR Close#37446
This PR provides a more helpful error than the one currently present:
`el.setAttribute is not a function`. It is not valid to have directives with host bindings
on `ng-template` or `ng-container` nodes. VE would silently ignore this, while Ivy
attempts to set the attribute and throws an error because these are comment nodes
and do not have `setAttribute` functionality.
It is better to throw a helpful error than to silently ignore this because
putting a directive with host binding on an `ng-template` or `ng-container` is most often a mistake.
Developers should be made aware that the host binding will have no effect in these cases.
Note that an error is already thrown in Ivy, as mentioned above, so this
is not a breaking change and can be merged to both master and patch.
Resolves#35994
PR Close#37111
This commit removes all markers from the inline template in
`AppComponent` and external template in `TemplateReference`.
Test scenarios should be colocated with the test cases themselves.
Besides, many existing cases are invalid. For example, if we want to
test autocomplete for HTML element, the existing test case is like:
```
<~{cursor} h1>
```
This doesn't make much sense, becasue the language service already sees
the `h1` tag in the template. The correct test case should be:
```
<~{cursor
```
IMO, this reflects the real-world use case better.
This commit also uncovers a bug in the way HTML entities autocompletion
is done. There's an off-by-one error in which a cursor that immediately
trails the ampersand character fails to trigger HTML entities
autocompletion.
PR Close#37475
**Problem**
After #31109 and #31865, it's still possible to get locked in state
`EXISTING_CLIENTS_ONLY`, without any possibility to get out (even by
pushing new updates on the server).
More specifically, if control doc `/latest` of `ngsw:/:db:control` once
gets a bad value, then the service worker will fail early, and won't be
able to overwrite `/latest` with new, valid values (the ones from future
updates).
For example, once in this state, URL `/ngsw/state` will show:
NGSW Debug Info:
Driver state: EXISTING_CLIENTS_ONLY (Degraded due to failed initialization: Invariant violated (initialize): latest hash 8b75… has no known manifest
Error: Invariant violated (initialize): latest hash 8b75… has no known manifest
at Driver.<anonymous> (https://my.app/ngsw-worker.js:2302:27)
at Generator.next (<anonymous>)
at fulfilled (https://my.app/ngsw-worker.js:175:62))
Latest manifest hash: 8b75…
Last update check: 22s971u
... with hash `8b75…` corresponding to no installed version.
**Solution**
Currently, when such a case happens, the service worker [simply fails
with an assertion][1]. Because this failure happens early, and is not
handled, the service worker is not able to update `/latest` to new
installed app versions.
I propose to detect this corrupted case (a `latest` hash that doesn't
match any installed version) a few lines above, so that the service
worker can correctly call its [already existing cleaning code][2].
[1]: https://github.com/angular/angular/blob/3569fdf/packages/service-worker/worker/src/driver.ts#L559-L563
[2]: https://github.com/angular/angular/blob/3569fdf/packages/service-worker/worker/src/driver.ts#L505-L519
This change successfully fixes the problem described above.
Unit test written with the help of George Kalpakas. Thank you!
PR Close#37453
The new tooling-cli-shared-api is used to guard changes to packages/compiler-cli/src/tooling.ts
which is a private API sharing channel between Angular FW and CLI.
Changes to this file should be rare and explicitly approved by at least two members
of the CLI team.
PR Close#37467
Previously, event listeners for component output events attached on an
Angular custom element before inserting it into the DOM (i.e. before
instantiating the underlying component) didn't fire for events emitted
during initialization lifecycle hooks, such as `ngAfterContentInit`,
`ngAfterViewInit`, `ngOnChanges` (initial call) and `ngOnInit`.
The reason was that that `NgElementImpl` [subscribed to events][1]
_after_ calling [ngElementStrategy#connect()][2], which is where the
[initial change detection][3] takes place (running the initialization
lifecycle hooks).
This commit fixes this by:
1. Ensuring `ComponentNgElementStrategy#events` is defined and available
for subscribing to, even before instantiating the component.
2. Ensuring `NgElementImpl` subscribes to `NgElementStrategy#events`
before calling `NgElementStrategy#connect()` (which initializes the
component instance).
Jira issue: [FW-2010](https://angular-team.atlassian.net/browse/FW-2010)
[1]: c0143cb2ab/packages/elements/src/create-custom-element.ts (L167-L170)
[2]: c0143cb2ab/packages/elements/src/create-custom-element.ts (L164)
[3]: c0143cb2ab/packages/elements/src/component-factory-strategy.ts (L158)Fixes#36141
PR Close#36161
Now in TS 3.9, classes in ES2015 can be wrapped in an IIFE.
This commit ensures that we still find the static properties that contain
decorator information, even if they are attached to the adjacent node
of the class, rather than the implementation or declaration.
Fixes#37330
PR Close#37436
This finder is designed to only process entry-points that are reachable
by the program defined by a tsconfig.json file.
It is triggered by calling `mainNgcc()` with the `findEntryPointsFromTsConfigProgram`
option set to true. It is ignored if a `targetEntryPointPath` has been
provided as well.
It is triggered from the command line by adding the `--use-program-dependencies`
option, which is also ignored if the `--target` option has been provided.
Using this option can speed up processing in cases where there is a large
number of dependencies installed but only a small proportion of the
entry-points are actually imported into the application.
PR Close#37075
Previously we only checked for static import declaration statements.
This commit also finds import paths from dynamic import expressions.
Also this commit should speed up processing: Previously we were parsing
the source code contents into a `ts.SourceFile` and then walking the parsed
AST to find import paths.
Generating an AST is unnecessary work and it is faster and creates less
memory pressure to just scan the source code contents with the TypeScript
scanner, identifying import paths from the tokens.
PR Close#37075
Previously this host was skipping files if they had imports that spanned
multiple lines, or if the import was a dynamic import expression.
PR Close#37075
This commit will store a cached copy of the parsed tsconfig
that can be reused if the tsconfig path is the same.
This will improve the ngcc "noop" case, where there is no processing
to do, when the entry-points have already been processed.
Previously we were parsing this config every time we checked for
entry-points to process, which can take up to seconds in some
cases.
Resolves#36882
PR Close#37417
`NgCompiler` is the heart of ngtsc and can be used to analyze and compile
Angular programs in a variety of environments. Most of these integrations
rely on `NgProgram` and the creation of an `NgCompilerHost` in order to
create a `ts.Program` with the right shape for `NgCompiler`.
However, certain environments (such as the Angular Language Service) have
their own mechanisms for creating `ts.Program`s that don't make use of a
`ts.CompilerHost`. In such environments, an `NgCompilerHost` does not make
sense.
This commit breaks the dependency of `NgCompiler` on `NgCompilerHost` and
extracts the specific interface of the host on which `NgCompiler` depends
into a new interface, `NgCompilerAdapter`. This interface includes methods
from `ts.CompilerHost`, the `ExtendedTsCompilerHost`, as well as APIs from
`NgCompilerHost`.
A consumer such as the language service can implement this API without
needing to jump through hoops to create an `NgCompilerHost` implementation
that somehow wraps its specific environment.
PR Close#37118
When the compiler encounters a function call within an NgModule imports
section, it attempts to resolve it to an NgModule-annotated class by
looking at the function body and evaluating the statements there. This
evaluation can only understand simple functions which have a single
return statement as their body. If the function the user writes is more
complex than that, the compiler won't be able to understand it and
previously the PartialEvaluator would return a "DynamicValue" for
that import.
With this change, in the event the function body resolution fails the
PartialEvaluator will now attempt to use its foreign function resolvers to
determine the correct result from the function's type signtaure instead. If
the function is annotated with a correct ModuleWithProviders type, the
compiler will be able to understand the import without static analysis of
the function body.
PR Close#37126
If we detect that an injectable class is inheriting from another injectable, we generate code that looks something like this:
```
const baseFactory = ɵɵgetInheritedFactory(Child);
@Injectable()
class Parent {}
@Injectable()
class Child extends Parent {
static ɵfac = (t) => baseFactory(t || Child)
}
```
This usually works fine, because the `ɵɵgetInheritedFactory` resolves to the factory of `Parent`, but the logic can break down if the `Child` class has a custom decorator. Custom decorators can return a new class that extends the original once, which means that the `ɵɵgetInheritedFactory` call will now resolve to the factory of the `Child`, causing an infinite loop.
These changes fix the issue by changing the inherited factory resolution logic so that it walks up the prototype chain class-by-class, while skipping classes that have the same factory as the class that was passed in.
Fixes#35733.
PR Close#37022
Rename bazel workspace from npm_dev_infra to npm_angular_dev_infra_private to make it clear that this package is private to angular.
Change driver-utilities module_name to match the new bazel workspace name.
Correct a comment by rewording it from "deployed version" to "published version".
Fix merge conflicts in tmpl-package.json
Make "//packages/bazel/src:esm5.bzl" replacement more generalized so that importing from "//packages/bazel" works.
Deleted "dev_infra/*" path from modules/benchmarks tsconfig.
Moved //dev-infra/benchmark/browsers to //dev-infra/browsers.
PR Close#36800
Use an explicit type guard when checking if a given object is of type AbstractControlOptions,
instead of a simple function returning a boolean value. This allows us to remove manual type
casting when using this function, relying instead on TypeScript to infer correct types.
PR Close#32541
In v9, we started showing a console warning when
instantiating a token that inherited its @Injectable
decorator rather than providing its own. This warning
said that the pattern would become an error in v10.
However, we have decided to wait until at least v11
to throw in this case, so this commit updates the
warning to be less prescriptive about the exact
version when the pattern will no longer be supported.
PR Close#37383
Currently, if an ngcc process is killed in a manner that it doesn't clean
up its lock file (or is killed too quickly) the compiler reports that it
is waiting on the PID of a process that doesn't exist, and that it will
wait up to a maximum of N seconds. This PR updates the locking code to
additionally check if the process exists, and if it does not it will
immediately bail out, and print the location of the lock file so a user
may clean it up.
PR Close#37250
Remove `looseIdentical` implementation and instead use the ES2015 `Object.is` in its place.
They behave exactly the same way except for `+0`/`-0`.
`looseIdentical(+0, -0)` => `true`
`Object.is(+0, -0)` => `false`
Other than the difference noted above, this is not be a breaking change because:
1. `looseIdentical` is a private API
2. ES2015 is listed as a mandatory polyfill in the [browser support
guide](https://angular.io/guide/browser-support#mandatory-polyfills)
3. Also note that `Ivy` already uses `Object.is` in `bindingUpdated`.
PR Close#37191
This commit disables the tests for Ivy version of language service on CI
because the compiler APIs are not yet stable, so language service should
not assert against its behavipr.
PR Close#37348
Inline source-maps in typings files can impact IDE performance
so ngcc should only add such maps if the original typings file
contains inline source-maps.
Fixes#37324
PR Close#37363
Previously there was a typo in a comment within the PropDecorator function relating to and justifying the use of Object.defineProperty. This PR clears up the wording that comment
PR Close#37369
Due to an outage with the proxy we rely on for publishing, we need
to temporarily directly publish to NPM using our own angular
credentials again.
PR Close#37378
In #37221 we disabled tsickle passes from transforming the tsc output that is used to publish all
Angular framework and components packages (@angular/*).
This change however revealed a bug in the ngc that caused __decorate and __metadata calls to still
be emitted in the JS code even though we don't depend on them.
Additionally it was these calls that caused code in @angular/material packages to fail at runtime
due to circular dependency in the emitted decorator code documeted as
https://github.com/microsoft/TypeScript/issues/27519.
This change partially rolls back #37221 by reenabling the decorator to static fields (static
properties) downleveling.
This is just a temporary workaround while we are also fixing root cause in `ngc` - tracked as
FW-2199.
Resolves FW-2198.
Related to FW-2196
PR Close#37317
This commit adds a link to the Bazel prototype for orchestrating
multiple CLI architects and also adds a link to the #angular channel in
the Bazel Slack workspace.
PR Close#37190
This commit removes the integration test for schematics in
`@angular/bazel` that is used to generate a Bazel builder. The Bazel
builder has been deprecated.
PR Close#37190
Before the introduction of the Ivy renderer, users would compile
their applications and use the resulting factories for SSR, since
these post-compilation artifacts ensured faster delivery. Thus,
using the original module as the rendering entrypoint was
considered suboptimal and was discouraged.
However, with the introduction of Ivy, this guidance is no longer
applicable since these factories are no longer generated.
Comparable speed is achieved using the factory-less module
renderer, and so we update the guiance in the docs for the method.
PR Close#37296
As of TypeScript 3.9, the tsc emit is not compatible with Closure
Compiler due to
https://github.com/microsoft/TypeScript/pull/32011.
There is some hope that this will be fixed by a solution like the one
proposed in
https://github.com/microsoft/TypeScript/issues/38374 but currently it's
unclear if / when that will
happen.
Since the Closure support has been somewhat already broken, and the
tsickle pass has been a source
of headaches for some time for Angular packages, we are removing it for
now while we rethink our
strategy to make Angular Closure compatible outside of Google.
This change has no effect on our Closure compatibility within Google
which work well because all the
code is compiled from sources and passed through tsickle.
This change only disables the tsickle pass but doesn't remove it.
A follow up PR should either remove all the traces of tscikle or
re-enable the fixed version.
BREAKING CHANGE: Angular npm packages no longer contain jsdoc comments
to support Closure Compiler's advanced optimizations
The support for Closure compiler in Angular packages has been
experimental and broken for quite some
time.
As of TS3.9 Closure is unusable with the JavaScript emit. Please follow
https://github.com/microsoft/TypeScript/issues/38374 for more
information and updates.
If you used Closure compiler with Angular in the past, you will likely
be better off consuming
Angular packages built from sources directly rather than consuming the
version we publish on npm
which is primarily optimized for Webpack/Rollup + Terser build pipeline.
As a temporary workaround you might consider using your current build
pipeline with Closure flag
`--compilation_level=SIMPLE`. This flag will ensure that your build
pipeline produces buildable and
runnable artifacts, at the cost of increased payload size due to
advanced optimizations being disabled.
If you were affected by this change, please help us understand your
needs by leaving a comment on https://github.com/angular/angular/issues/37234.
PR Close#37221
Update docs in the micro benchmarks to include:
* How to run with no turbo inlining
* Where to find the profiles in the DevTools
* Best way to debug benchmarks (using the profile_in_browser rather than --inspect-brk)
PR Close#37140
In ES2015 IIFE wrapped classes, the identifier that would reference the class
of the NgModule may be an alias variable. Previously the `Esm2015ReflectionHost`
was not able to match this alias to the original class declaration. This resulted
in failing to identify some `ModuleWithProviders` functions in such case.
These IIFE wrapped classes were introduced in TypeScript 3.9, which is why
this issue is only recently appearing. Since 9.1.x does not support TS 3.9
there is no reason to backport this commit to that branch.
Fixes#37189
PR Close#37206
To better check that the code is working, this commit gives a
distinct name (`DecoratedWrappedClass_1`) to the "adjacent"
class declaration in the tests.
PR Close#37206
JoostK
George Kalpakas
Pete Bacon Darwin
crisbeto
Harri Lehtola
Keen Yee Liau
Santosh Yadav
Andrew Kushnir
Joey Perrott
Keen Yee Liau
Alex Rickabaugh
Adam
Paul Gschwendtner
Dmitrij Kuba
Ajit Singh
Sonu Kapoor
Oussama Ben Brahim
Krzysztof Grzybek
Anas Barghoud
Manduro
Greg Magolan
Tiep Phan
ggradnig
Jan Krems
lazarljubenovic
Misko Hevery
ivanwonder
Aamir Mukaram
Doug Parker
Andrew Scott
Judy Bogart
JiaLiPassion
Alan Agius
David Neil
atscott
AleksanderBodurri
Lars Gyrup Brink Nielsen
Ayaz Hafiz
Adrien Vergé
Igor Minar
Wagner Maciel
Kara Erickson
Terence D. Honles
Markus Ende