Previously, `ngcc` would avoid processing a `formatPath` that a property
in `package.json` mapped to, if either the _property_ was marked as
processed or the `formatPath` (i.e. the file(s)) was processed in the
same `ngcc` run (since the `compiledFormats` set was not persisted
across runs).
This could lead in a situation where a `formatPath` would be compiled
twice (if for example properties `a` and `b` both mapped to the same
`formatPath` and one would run `ngcc` for property `a` and then `b`).
This commit fixes it by ensuring that as soon as a `formatPath` has been
processed all corresponding properties are marked as processed (which
persists across `ngcc` runs).
PR Close#32003
Previously, when `ngcc` was called with `compileAllFormats === false`
(i.e. how `@angular/cli` calls it), it would not attempt to process
more properties, once the first was successfully processed. However, it
_would_ continue looping over them and perform some unnecessary
operations, such as:
- Determining the format each property maps to (which can be an
expensive operation for some properties mapping to either UMD or
CommonJS).
- Checking whether each property has been processed (which involves
checking whether any property has been processed with a different
version of `ngcc` each time).
- Potentially marking properties as processed (which involves a
file-write operation).
This commit avoids the unnecessary operations by entirely skipping
subsequent properties, once the first one has been successfully
processed. While this theoretically improves performance, it is not
expected to have any noticeable impact in practice, since the list of
`propertiesToConsider` is typically small and the most expensive
operation (marking a property as processed) has low likelihood of
happening (plus these operations are a tiny fraction of `ngcc`'s work).
PR Close#32003
Previously, when `ngcc` needed to mark multiple properties as processed
(e.g. a processed format property and `typings` or all supported
properties for a non-Angular entry-point), it would update each one
separately and write the file to disk multiple times.
This commit changes this, so that multiple properties can be updated at
once with one file-write operation. While this theoretically improves
performance (reducing the I/O operations), it is not expected to have
any noticeable impact in practice, since these operations are a tiny
fraction of `ngcc`'s work.
This change will be useful for a subsequent change to mark all
properties that map to the same `formatPath` as processed, once it is
processed the first time.
PR Close#32003
Using `ParentInjectorPromise.all()` (which is a static method inherited
from `SyncPromise`) causes Closure Compiler (or some related tool) to
complain:
```
TypeError: ...$packages$upgrade$src$common$src$downgrade_component_ParentInjectorPromise.all is not a function
```
Switching to `SyncPromise.all()` (the static method on the parent class)
to avoid this error.
PR Close#31986
This PR changes the language service to work in two different modes:
1. TS + Angular
Plugin augments TS language service to provide additonal Angular
information. This only works with inline template and is meant to be
used as a local plugin (configured via tsconfig.json).
2. Angular only
Plugin only provides information on Angular templates, no TS info at
all. This effectively disables native TS features and is meant for
internal use only.
Default mode is `angularOnly = false` so that we don't break any users
already using Angular LS as local plugin.
As part of the refactoring, `undefined` is removed from type aliases
because it is considered bad practice.
go/tsstyle#nullableundefined-type-aliases
```
Type aliases must not include |null or |undefined in a union type.
Nullable aliases typically indicate that null values are being passed
around through too many layers of an application, and this clouds the
source of the original issue that resulted in null. They also make it
unclear when specific values on a class or interface might be absent.
```
PR Close#31935
Fixes Ivy's directive matching not capturing attribute selectors when there is one class binding, one style binding and a regular binding that precede the attribute that would match the directive. The issue appears to come from the fact that we weren't skipping over style bindings correctly which was throwing the loop off not to go into `bindingsMode` and to skip some of the bindings when matching.
PR Close#31942
This commit changes the emit order of ngcc when a class has multiple static
fields being assigned. Previously, ngcc would emit each static field
followed immediately by any extra statements specified for that field. This
causes issues with downstream tooling such as build optimizer, which expects
all of the static fields for a class to be grouped together. ngtsc already
groups static fields and additional statements. This commit changes ngcc's
ordering to match.
PR Close#31933
Fixes Ivy's `DebugElement.triggerEventHandler` to picking up events that have been registered through a `Renderer2`, unlike ViewEngine.
This PR resolves FW-1480.
PR Close#31845
Prior to this commit, the `schemas` configuration was applied to top-level view only. That leads to problems when using unknown props with elements inside nested views (for example generated as a result of *ngIf). This commit passes `schemas` information down to nested views to make sure that all the checks are consistent.
PR Close#31913
AngularJS compilation is a synchronous operation (unless having to fetch
a template, which is not supported for downgraded components).
Previously, ngUpgrade tried to retain the synchronous nature of the
compilation for downgraded components (when possible), by using a
synchronous thenable implementation (`ParentInjectorPromise`). This was
accidentally broken in #27217 by replacing a call to
`ParentInjectorPromise#then()` (which can be synchronous) with a call to
`Promise.all()` (which is asynchronous).
This commit fixes this by introducing a `SyncPromise.all()` static
method; similar to `Promise.all()` but retaining the synchronous
capabilities of `SyncPromise` (which `ParentInjectorPromise` inherits
from).
Fixes#30330
PR Close#31840
If a project being built with ngtsc has no templates to check, then ngtsc
previously generated an empty typecheck file. This seems to trigger some
pathological behavior in TS where the entire user program is re-checked,
which is extremely expensive. This likely has to do with the fact that the
empty file is not considered an ES module, meaning the module structure of
the program has changed.
This commit causes an export to be produced in the typecheck file regardless
of its other contents, which guarantees that it will be an ES module. The
pathological behavior is avoided and template type-checking is fast once
again.
PR Close#31922
Describe the indexer module for Angular compiler developers. Include
scope of analysis provided by the module and the indexers it targets as
first-party.
PR Close#31260
In #31426 a fix was implemented to render namespaced decorator imports
correctly, however it turns out that the fix only worked when decorator
information was extracted from static properties, not when using
`__decorate` calls.
This commit fixes the issue by creating the decorator metadata with the
full decorator expression, instead of only its name.
Closes#31394
PR Close#31614
An identifier may become repeated when bundling multiple source files
into a single bundle, so bundlers have a strategy of suffixing non-unique
identifiers with a suffix like $2. Since ngcc operates on such bundles,
it needs to process potentially suffixed identifiers in their canonical
form without the suffix. The "ngx-pagination" package was previously not
compiled fully, as most decorators were not recognized.
This commit ensures that identifiers are first canonicalized by removing
the suffix, such that they are properly recognized and processed by ngcc.
Fixes#31540
PR Close#31614
Any decorator information present in TypeScript is emitted into the
generated JavaScript sources by means of `__decorate` call. This call
contains both the decorators as they existed in the original source
code, together with calls to `tslib` helpers that convey additional
information on e.g. type information and parameter decorators. These
different kinds of decorator calls were not previously distinguished on
their own, but instead all treated as `Decorator` by themselves. The
"decorators" that were actually `tslib` helper calls were conveniently
filtered out because they were not imported from `@angular/core`, a
characteristic that ngcc uses to drop certain decorators.
Note that this posed an inconsistency in ngcc when it processes
`@angular/core`'s UMD bundle, as the `tslib` helper functions have been
inlined in said bundle. Because of the inlining, the `tslib` helpers
appear to be from `@angular/core`, so ngcc would fail to drop those
apparent "decorators". This inconsistency does not currently cause any
issues, as ngtsc is specifically looking for decorators based on their
name and any remaining decorators are simply ignored.
This commit rewrites the decorator analysis of a class to occur all in a
single phase, instead of all throughout the `ReflectionHost`. This
allows to categorize the various decorate calls in a single sweep,
instead of constantly needing to filter out undesired decorate calls on
the go. As an added benefit, the computed decorator information is now
cached per class, such that subsequent reflection queries that need
decorator information can reuse the cached info.
PR Close#31614
Currently the `DebugElement.listeners` array are retained after the node is destroyed. This means that they'll continue to fire through `triggerEventHandler` and can cause memory leaks. This has already been fixed in Ivy, but these changes fix it in ViewEngine for consistency.
PR Close#31820
nodejs rules 0.34.0 now includes protractor_web_test_suite rule (via new @bazel/protractor rule) so we switch to that location for that rule in this PR so that /packages/bazel/src/protractor can be removed in a future PR
this PR also brings in node toolchain support which was released in nodejs rules 0.33.0. this is a prerequisite for RBE for mac & windows users
bazel schematics also updated with the same. @bazel/bazel 0.28.1 npm package includes transitive dep on hide-bazel-files so we're able to remove an explicit dep on that as well.
PR Close#31824
In `BrowserModule` the value of `LOCALE_ID` is defined in the `APPLICATION_MODULE_PROVIDERS` after `APP_INITIALIZER` has run.
This PR ensures that `LOCALE_ID` is also set for ivy at the same moment which allows the application to fetch the locale from a backend (for example).
Fixes#31465
FW-1436 #resolve
PR Close#31566
Fixes Ivy throwing an error when something is passed in as a `forwardRef` into `@Injectable`'s `useClass` option. The error was being thrown, because we were trying to get the provider factory off of the wrapper function, rather than the value itself.
This PR resolves FW-1335.
PR Close#30532
In #30181, several testcases were added that were failing in Windows.
The reason was that a recent rebase missed a required change to interact
with the compiler's virtualized filesystems. This commit introduces the
required usage of the VFS layer to fix the testcase.
PR Close#31860
`TemplateVisitor#visitBoundAttribute` currently has to invoke visiting
expressions manually (this is fixed in #31813). Previously, it did not
bind `targetToIdentifier` to the visitor before deferring to the
expression visitor, which breaks the `targetToIdentifier` code. This
fixes that and adds a test to ensure the closure processed correctly.
This change is urgent; without it, many indexing targets in g3 are
broken.
PR Close#31861
Template AST nodes for (bound) attributes, variables and references will
now retain a reference to the source span of their value, which allows
for more accurate type check diagnostics.
PR Close#30181
The type check blocks (TCB) that ngtsc generates for achieving type
checking of Angular templates needs to be annotated with positional
information in order to translate TypeScript's diagnostics for the TCB
code back to the location in the user's template. This commit augments
the TCB by attaching trailing comments with AST nodes, such that a node
can be traced back to its source location.
PR Close#30181
Adds support for indexing template referenecs, variables, and property
and method calls inside bound attributes and bound events. This is
mostly an extension of the existing indexing infrastructure.
PR Close#31535
Currently we always generate the `read` parameter for the view and content query instructions, however since most of the time the `read` parameter won't be set, we'll end up generating `null` which adds 5 bytes for each query when minified. These changes make it so that the `read` parameter only gets generated if it has a value.
PR Close#31667
This commit fixes a bug where we assumed all dynamically created
components would have tag-name selectors, so we passed through the
"tag name" to the renderer as the first index of the selector. For
components with attribute selectors, the tag name would be "", so
the renderer would try to create an element with tag name "" and
throw. Now we default to a "div" element the same way that View
Engine did.
Closes#31785
PR Close#31812
This switches all Angular targets to be built with the same Angular compiler architecture (c.n. Ivy) that the Angular indexer uses. This eliminates issues with cross-references to transitive dependencies not being generated because of the way such dependencies are loaded by the legacy compiler arch.
PR Close#31786
Extend indexing API interface to provide information about used
directives' selectors on template elements. This enables an indexer to
xref element attributes to the directives that match them.
The current way this matching is done is by mapping selectors to indexed
directives. However, this fails in cases where the directive is not
indexed by the indexer API, like for transitive dependencies. This
solution is much more general.
PR Close#31782
When analyzing components, directives, etc we capture its base class.
Previously this assumed that the code is in TS format, which is not
always the case (e.g. ngcc).
Now this code is replaced with a call to
`ReflectionHost.getBaseClassExpression()`, which abstracts the work
of finding the base class.
PR Close#31544
Previously the last file-system being tested was left as the current
file-system. Now it is reset to an `InvalidFileSystem` to ensure future
tests are not affected.
PR Close#31544
Moves all google3 migration tslint rules into a single directory.
This makes it easier to wire up multiple migration rules in
google3 without having to update the rule directories each time
a new migration is available.
PR Close#30956
Introduces a new migration schematic for adding the "@Injectable()"
decorator to provider classes which are currently not migrated. Previously
in ViewEngine, classes which are declared as providers sometimes don't
require the "@Injectable()" decorator
(e.g. https://stackblitz.com/edit/angular-hpo7gw)
With Ivy, provider classes need to be explicitly decorated with
the "@Injectable()" decorator if they are declared as providers
of a given module. This commit introduces a migration schematic
which automatically adds the explicit decorator to places where
the decorator is currently missing.
The migration logic is designed in a CLI devkit and TSlint agnostic
way so that we can also have this migration run as part of a public
CLI migration w/ `ng update`. This will be handled as part of a follow-up to reiterate on console output etc.
Resolves FW-1371
PR Close#30956
The way the `ComponentFactory.create` is set up at the moment is that if a `rootSelectorOrNode` is passed in, the root context will be injected instead of creating dedicated one for the component. As far as I can tell, there doesn't seem to be a reason to do this and nothing seems to break because of it. These changes switch to always create the root context.
PR Close#31661
In ViewEngine nodes that were inserted through `Renderer2` would also be picked up by `DebugNode.query` and `DebugNode.queryAll`. This worked because everything in ViewEngine went through `Renderer2` and `DebugRenderer2` in dev mode which was able to keep track of the child nodes as they're being inserted. This no longer works in Ivy, because we don't use `DebugRenderer2` and debug nodes work a little differently. These changes work around the issue by walking the DOM as the logical tree is being walked and looking for matches. Note that this is __not__ optimal, because we're walking similar trees multiple times. ViewEngine could do it more efficiently, because all the insertions go through Renderer2, however that's not the case in Ivy. This approach is being used because:
1. Matching the ViewEngine behavior would mean potentially introducing a depedency from `Renderer2` to Ivy which could bring Ivy code into ViewEngine.
2. We would have to make `Renderer3` "know" about debug nodes.
3. It allows us to capture nodes that were inserted directly via the DOM.
PR Close#31716
This commit updates the `_clone` function of the `_ApplySourceSpanTransformer` class, where the for-in loop was used, resulting in copying from prototype to own properties, thus consuming more memory. Prior to NodeJS 12 (V8 versions before 7.4) there was an optimization that was improving the situation and since that logic was removed in favor of other optimizations, the situation with memory consumption caused by the for-in loop got worse. This commit adds a check to make sure we copy only own properties over to cloned object.
Closes#31627.
PR Close#31638
When injecting a `ChangeDetectorRef` into a pipe, the expected result is that the ref will be tied to the component in which the pipe is being used. This works for most cases, however when a pipe is used inside a property binding of a component (see test case as an example), the current `TNode` is pointing to component's host so we end up injecting the inner component's view. These changes fix the issue by only looking up the component view of the `TNode` if the `TNode` is a parent.
This PR resolves FW-1419.
PR Close#31438
In the previous patch () all the existing styling code was turned
off in favor of using the new refactored ivy styling code. This
patch is a follow up patch to that and removes all old, unused
styling code from the render3 directory.
PR Close#31193
This commit fixes a bug where ICU expressions inserted into ngTemplateOutlets
that are inside ngFor blocks would throw an error. We were assuming in view
insertion code that text nodes would always exist by the time a view\`s
creation block had executed. This is not true for text nodes created dynamically
by ICUs because this happens in the update block (in `i18nApply`).
This change ensures such dynamically created nodes are skipped when encountered
too early (as they will be attached later by i18n code anyway).
PR Close#31789
We currently have a handwritten version of the Ivy directive def for NgClass so
we can switch between Ivy and View Engine behavior. This generated code needs to
be kept up-to-date with what the Ivy compiler generates.
PR 30742 recently changed `classMap` such that it now requires allocation of
host binding slots. This means that the `allocHostVars()` function must be
called in the NgClass directive def to match compiler output, but the
handwritten directive def was not updated. This caused a bug where NgClass
was inappropriately overwriting data for other directives because space was
not allocated for its values.
PR Close#31788
This commit bumps the heap size of node/ngc under bazel to 4 GB instead of
the previous 2 GB. This brings it in sync with what the TS compiler uses
in g3, and fixes a bug where ngc would crash with OOM in worker mode.
PR Close#31784
Currently, template expressions and statements have their location
recorded relative to the HTML element they are in, with no handle to
absolute location in a source file except for a line/column location.
However, the line/column location is also not entirely accurate, as it
points an entire semantic expression, and not necessarily the start of
an expression recorded by the expression parser.
To support record of the source code expressions originate from, add a
new `sourceSpan` field to `ASTWithSource` that records the absolute byte
offset of an expression within a source code.
Implement part 2 of [refactoring template parsing for
stability](https://hackmd.io/@X3ECPVy-RCuVfba-pnvIpw/BkDUxaW84/%2FMA1oxh6jRXqSmZBcLfYdyw?type=book).
PR Close#31391
This commit is the final patch of the ivy styling algorithm refactor.
This patch swaps functionality from the old styling mechanism to the
new refactored code by changing the instruction code the compiler
generates and by pointing the runtime instruction code to the new
styling algorithm.
PR Close#30742
Versions of CLI prior to angular/angular-cli@0e339ee did not expose the host.getModifiedResourceFiles() method.
This meant that null was being passed through to the IncrementalState.reconcile() method
to indicate that there were either no changes or the host didn't support that method.
This commit fixes a bug where we were checking for undefined rather than null when
deciding whether any resource files had changed, causing a null reference error to be thrown.
This bug was not caught by the unit testing because the tests set up the changed files
via a slightly different process, not having access to the CompilerHost, and these test
were making the erroneous assumption that undefined indicated that there were no
changed files.
PR Close#31322
Currently developers can use the `By` class to construct common
`DebugElement` query predicates. e.g. `By.directive(MyDirective)`.
The `directive()` and `all()` predicates are currently returning
a predicate that works for `DebugElement` nodes. This return type
is too strict since the predicate is not specific to `DebugElement`
instances and can also apply to `DebugNode` instances.
Meaning that developers are currently able to use the `directive()`
predicate when using `queryAllNodes()`. This is a common practice
but will break when the project is compiled with TypeScript's
`--strictFunctionTypes` flag as the `DebugElement` predicate type
is not assignable to predicates for `DebugNode`. In order to make
these predicates usable with `--strictFuntionTypes` enabled, we
adjust the predicate type to reflect what is actually needed for
evaluation of the predicate.
PR Close#30993
Fixes all TypeScript failures caused by enabling the `--strict`
flag for test source files. We also want to enable the strict
options for tests as the strictness enforcement improves the
overall codehealth, unveiled common issues and additionally it
allows us to enable `strict` in the `tsconfig.json` that is picked
up by IDE's.
PR Close#30993
In View Engine, developers can pass bootstrap and entry components
as nested arrays. e.g.
```ts
export const MyOtherEntryComponents = [A, B, C]
@NgModule({
entryComponents: [MyComp, MyOtherEntryComponents]
})
```
Currently using nested arrays for these properties causes
unexpected errors to be reported in Ivy since the semantic
NgModule checks aren't properly recursing into the nested
entry/bootstrap components. This issue has been unveiled by
enabling the strict function parameter checks.
PR Close#30993
Currently the `ɵɵdefineComponent` method has incorrect type
definitions the `directives` and `pipes` metadata property.
The incorrect types allow developers to pass in already instantiated
`DirectiveDef` or `ComponentDef` objects. This can cause unexpected
failures because the definition internally only expects `Type` objects
and now incorrectly tries to read the `ngDirectiveDef` or `ngComponentDef`
of existing definitions.
This issue has been unveiled by enabling the strict function parameter
types flag, where the directive definitions are determined from each array
element in the `directives` or `pipes` property (which can throw).
PR Close#30993
As part of FW-1265, the `@angular/compiler` package is made compatible
with the TypeScript `--strict` flag. This already unveiled a few bugs,
so the strictness flag seems to help with increasing the overall code health.
Read more about the strict flag [here](https://www.typescriptlang.org/docs/handbook/compiler-options.html)
PR Close#30993
As part of FW-1265, the `@angular/core` package is made compatible
with the TypeScript `--strict` flag. This already unveiled a few bugs,
so the strictness flag seems to help with increasing the overall code health.
Read more about the strict flag [here](https://www.typescriptlang.org/docs/handbook/compiler-options.html)
PR Close#30993
Previously, the usage of `null` and `undefined` keywords in code that is
statically interpreted by ngtsc resulted in a `DynamicValue`, as they were
not recognized as special entities. This commit adds support to interpret
these keywords.
PR Close#31150
The support for decorators that were imported via a namespace,
e.g. `import * as core from `@angular/core` was implemented
piecemeal. This meant that it was easy to miss situations where
a decorator identifier needed to be handled as a namepsaced
import rather than a direct import.
One such issue was that UMD processing of decorators was not
correct: the namespace was being omitted from references to
decorators.
Now the types have been modified to make it clear that a
`Decorator.identifier` could hold a namespaced identifier,
and the corresponding code that uses these types has been
fixed.
Fixes#31394
PR Close#31426
Fixes Ivy matching directives against attribute bindings (e.g. `[attr.some-directive]="foo"`). Works by excluding attribute bindings from the attributes array during compilation. This has the added benefit of generating less code.
**Note:** My initial approach to implementing this was to have a different marker for attribute bindings so that they can be ignored when matching directives, however as I was implementing it I realized that the attributes in that array were only used for directive matching (as far as I could tell). I decided to drop the attribute bindings completely, because it results in less generated code.
PR Close#31541
Data members in TypeScriptServiceHost of Map type should be eagerly
initialized to address issue/24571. This eliminates the need to
constantly check for truthiness and makes code much more readable.
More PRs to follow to address issue/24571.
PR Close#31577
Prior to this commit, default value for LOCALE_ID was not setup for Closure Compiler. In Closure Compiler, we can use `goog.LOCALE` as a default value, which will be replaced at build time with current locale.
PR Close#31519
Currently we reuse the same instruction both for regular property bindings and property bindings on the `host`. The only difference between the two is that when it's on the host we shouldn't support inputs. We have an optional parameter called `nativeOnly` which is used to differentiate the two, however since `nativeOnly` is preceeded by another optional parameter (`sanitizer`), we have to generate two extra parameters for each host property bindings every time (e.g. `property('someProp', 'someValue', null, true)`).
These changes add a new instruction called `hostProperty` which avoids the need for the two parameters by removing `nativeOnly` which is always set and it allows us to omit `sanitizer` when it isn't being used.
These changes also remove the `nativeOnly` parameter from the `updateSyntheticHostBinding` instruction, because it's only generated for host elements which means that we can assume that its value will always be `true`.
PR Close#31550
Add support for indexing elements in the indexing module.
Opening and self-closing HTML tags have their selector indexed, as well
as the attributes on the element and the directives applied to an
element.
PR Close#31240
If zonejs is sent undefined callbacks it proceeds to attempt to call them, then fails, catches it own fail, rewrites the stack to hide the mistake, and reports a TypeError with a callstack unrelated to inputs.
Throw early if the callback is undefined (as can happen if JS or any-ified TS calls zone invokeTask).
Check for undefined onCommplete callback to zonejs jasmine wrapper.
PR Close#31497
Switch back to passing a custom bazel host instead of rewriting one that
is passed to `compile` now that the Angular indexer is stable.
Revert "feat(bazel): allow passing and rewriting an old bazel host"
This reverts commit 0a4c1c8f803a65f5c156af90e67f7d7d68ebc7f8.
PR Close#31496
There are two places in the ngcc processing where it needs to load the
content of a file given by a general path:
* when determining the format of an entry-point.
To do this ngcc uses the value of the relevant property in package.json.
But in the case of `main` it must parse the contents of the entry-point
file to decide whether the format is UMD or CommonJS.
* when parsing the source files for dependencies to determine the order in
which compilation must occur. The relative imports in each file are parsed
and followed recursively, looking for external imports.
Previously, we naively assumed that the path would match the file name exactly.
But actually we must consider the standard module resolution conventions.
E.g. the extension (.js) may be missing, or the path may refer to a directory
containing an index.js file.
This commit fixes both places.
This commit now requires the `DependencyHost` instances to check
the existence of more files than before (at worst all the different possible
post-fixes). This should not create a significant performance reduction for
ngcc. Since the results of the checks will be cached, and similar work is
done inside the TS compiler, so what we lose in doing it here, is saved later
in the processing. The main performance loss would be where there are lots
of files that need to be parsed for dependencies that do not end up being
processed by TS. But compared to the main ngcc processing this dependency
parsing is a small proportion of the work done and so should not impact
much on the overall performance of ngcc.
// FW-1444
PR Close#31509
Prior to this fix, the logic to set the right placeholder format for ICUs was a bit incorrect: if there was a nested ICU in one of the root ICU cases, that led to a problem where placeholders in subsequent branches used the wrong ({$placeholder}) format instead of {PLACEHOLDER} one. This commit updates the logic to make sure we properly transform all placeholders even if nested ICUs are present.
PR Close#31516
Prior to this commit, it was impossible to override providers defined via ModuleWithProviders using TestBed.overrideProvider API. The problem was caused by the fact that we were not taking into account these providers while calculating accumulated set of provider overrides. This commit updates the logic to extract providers from ModuleWithProviders and calculate the final set of overrides taking them into account.
PR Close#31415
Since, 7186f9c01 `compiler-cli` is no longer depending on `shelljs` for
production code. (We still use it in tests and infrastructure/tooling.)
Incidentally, this should also help with #29460.
PR Close#31468
Removes direct calls from one instruction into another, moves the shared logic into a separate function and removes the state getters from the shared function.
This PR resolves FW-1340.
PR Close#31456
Previously, resource paths beginning with '/' (aka "rooted" paths, which
are not actually absolute filesystem paths, but are relative to the
TypeScript project root directory) were not handled correctly. The leading
'/' was stripped and the path was resolved as if it was relative, but with
no containing file for context. This led to resources in different rootDirs
not being found.
Instead, such rooted paths are now resolved without TypeScript's help, by
checking each root directory. A test is added to this effect.
PR Close#31511
When determining if a `main` path points to a UMD or CommonJS
format, the contents of the file need to be loaded and parsed.
Previously, it was assumed that the path referred to the exact filename,
but did not account for normal module resolution semantics, where the
path may be missing an extension or refer to a directory containing an
`index.js` file.
// FW-1444
PR Close#31509
George Kalpakas
JiaLiPassion
Keen Yee Liau
Kristiyan Kostadinov
Pawel Kozlowski
Alex Rickabaugh
hafiz
Andrew Kushnir
Alex Eagle
JoostK
Greg Magolan
Olivier Combe
Erik Pintar
Igor Minar
Kara Erickson
Ben Black
Judy Bogart
Pete Bacon Darwin
Paul Gschwendtner
Matias Niemelä
Miško Hevery
Balint Mero
Matt Lewis
Momin Khan
nikz99
Jon Wallsten
vikerman
Joey Perrott
Hamid