Some projects include .js source files (via the TypeScript allowJs option).
Previously, the compiler would attempt to tag these files for shims, which
caused errors as the regex used to create shim filenames assumes a .ts file.
This commit fixes the bug by filtering out non-ts files during tagging.
PR Close#36987
These tests were matching file-paths against what is retrieved from the
TS compiler. But the TS compiler paths have been canonicalised, so the
tests were brittle on case-insensitive file-systems.
PR Close#36859
These tests were matching file-paths against what is retrieved from the
TS compiler. But the TS compiler paths have been canonicalised, so the
tests were brittle on case-insensitive file-systems.
PR Close#36859
These tests were matching file-paths against what is retrieved from the
TS compiler. But the TS compiler paths have been canonicalised, so the
tests were brittle on case-insensitive file-systems.
PR Close#36859
The type checking infrastrure uses file-paths that may come from the
TS compiler. Such paths will have been canonicalized, and so the type
checking classes must also canonicalize paths when matching.
PR Close#36859
Since the `MockFileSystemWindows` is case-insensitive, any
drive path that must be added to a normalized path should be lower
case to make the path canonical.
PR Close#36859
Previously this class used the file passed in directly to look up files in the
in-memory mock file-system. But this doesn't match the behaviour of
case-insensitive file-systems. Now the look up is done on the canonical
file paths.
PR Close#36859
Previously this method was returning the exact opposite value
than the correct one.
Also, calling `this.exists()` causes an infinite recursions,
so the actual file-system `fs.existsSync()` method is used
to ascertain the case-sensitivity of the file-system.
PR Close#36859
Previously the `getRootDirs()` function was not converting
the root directory paths to their canonical form, which can
cause problems on case-insensitive file-systems.
PR Close#36859
The `getCanonicalFileName()` method was not actually
calling the `useCaseSensitiveFileNames()` method. So
it always returned a case-sensitive canonical filename.
PR Close#36859
Previously in v9, we deprecated the pattern of undecorated base classes
that rely on Angular features. We ran a migration for this in version 9
and will run the same on in version 10 again.
To ensure that projects do not regress and start using the unsupported
pattern again, we report an error in ngtsc if such undecorated classes
are discovered.
We keep the compatibility code enabled in ngcc so that libraries
can be still be consumed, even if they have not been migrated yet.
Resolves FW-2130.
PR Close#36921
As of version 10, libraries following the APF will no longer contain
ESM5 output. Hence, tests in ngcc need to be updated as they currently
rely on the release output of `@angular/core`.
Additionally, we'd need to support in ngcc that the `module`
property of entry-points no longer necessarily refers to
`esm5` output, but instead can also target `esm2015`.
We currently achieve this by checking the path the `module`
property points to. We can do this because as per APF, the
folder name is known for the esm2015 output. Long-term for
more coverage, we want to sniff the format by looking for
known ES2015 constructs in the file `module` refers to.
PR Close#36944
We can remove all of the entry point resolution configuration from the package.json
in our source code as ng_package rule adds the properties automatically and correctly
configures them.
This change simplifies our code base but doesn't have any impact on the package.json
in the distributed npm_packages.
PR Close#36944
In #36892 the `ModuleWithProviders` type parameter becomes required.
This exposes a bug in ngcc, where it can only handle functions that have a
specific form:
```
function forRoot() {
return { ... };
}
```
In other words, it only accepts functions that return an object literal.
In some libraries, the function instead returns a call to another function.
For example in `angular-in-memory-web-api`:
```
InMemoryWebApiModule.forFeature = function (dbCreator, options) {
return InMemoryWebApiModule_1.forRoot(dbCreator, options);
};
```
This commit changes the parsing of such functions to use the
`PartialEvaluator`, which can evaluate these more complex function
bodies.
PR Close#36948
Previously this method was implemented on the `NgccReflectionHost`,
but really it is asking too much of the host, since it actually needs to do
some static evaluation of the code to be able to support a wider range
of function shapes. Also there was only one implementation of the method
in the `Esm2015ReflectionHost` since it has no format specific code in
in.
This commit moves the whole function (and supporting helpers) into the
`ModuleWithProvidersAnalyzer`, which is the only place it was being used.
This class will be able to do further static evaluation of the function bodies
in order to support more function shapes than the host can do on its own.
The commit removes a whole set of reflection host tests but these are
already covered by the tests of the analyzer.
PR Close#36948
This optimization builds on a lot of prior work to finally make type-
checking of templates incremental.
Incrementality requires two main components:
- the ability to reuse work from a prior compilation.
- the ability to know when changes in the current program invalidate that
prior work.
Prior to this commit, on every type-checking pass the compiler would
generate new .ngtypecheck files for each original input file in the program.
1. (Build #1 main program): empty .ngtypecheck files generated for each
original input file.
2. (Build #1 type-check program): .ngtypecheck contents overridden for those
which have corresponding components that need type-checked.
3. (Build #2 main program): throw away old .ngtypecheck files and generate
new empty ones.
4. (Build #2 type-check program): same as step 2.
With this commit, the `IncrementalDriver` now tracks template type-checking
_metadata_ for each input file. The metadata contains information about
source mappings for generated type-checking code, as well as some
diagnostics which were discovered at type-check analysis time. The actual
type-checking code is stored in the TypeScript AST for type-checking files,
which is now re-used between programs as follows:
1. (Build #1 main program): empty .ngtypecheck files generated for each
original input file.
2. (Build #1 type-check program): .ngtypecheck contents overridden for those
which have corresponding components that need type-checked, and the
metadata registered in the `IncrementalDriver`.
3. (Build #2 main program): The `TypeCheckShimGenerator` now reuses _all_
.ngtypecheck `ts.SourceFile` shims from build #1's type-check program in
the construction of build #2's main program. Some of the contents of
these files might be stale (if a component's template changed, for
example), but wholesale reuse here prevents unnecessary changes in the
contents of the program at this point and makes TypeScript's job a lot
easier.
4. (Build #2 type-check program): For those input files which have not
"logically changed" (meaning components within are semantically the same
as they were before), the compiler will re-use the type-check file
metadata from build #1, and _not_ generate a new .ngtypecheck shim.
For components which have logically changed or where the previous
.ngtypecheck contents cannot otherwise be reused, code generation happens
as before.
PR Close#36211
As a performance optimization, this commit splits the single
__ngtypecheck__.ts file which was previously added to the user's program as
a container for all template type-checking code into multiple .ngtypecheck
shim files, one for each original file in the user's program.
In larger applications, the generation, parsing, and checking of this single
type-checking file was a huge performance bottleneck, with the file often
exceeding 1 MB in text content. Particularly in incremental builds,
regenerating this single file for the entire application proved especially
expensive.
This commit introduces a new strategy for template type-checking code which
makes use of a new interface, the `TypeCheckingProgramStrategy`. This
interface abstracts the process of creating a new `ts.Program` to type-check
a particular compilation, and allows the mechanism there to be kept separate
from the more complex logic around dealing with multiple .ngtypecheck files.
A new `TemplateTypeChecker` hosts that logic and interacts with the
`TypeCheckingProgramStrategy` to actually generate and return diagnostics.
The `TypeCheckContext` class, previously the workhorse of template type-
checking, is now solely focused on collecting and generating type-checking
file contents.
A side effect of implementing the new `TypeCheckingProgramStrategy` in this
way is that the API is designed to be suitable for use by the Angular
Language Service as well. The LS also needs to type-check components, but
has its own method for constructing a `ts.Program` with type-checking code.
Note that this commit does not make the actual checking of templates at all
_incremental_ just yet. That will happen in a future commit.
PR Close#36211
Shim generation was built on a lie.
Shims are files added to the program which aren't original files authored by
the user, but files authored effectively by the compiler. These fall into
two categories: files which will be generated (like the .ngfactory shims we
generate for View Engine compatibility) as well as files used internally in
compilation (like the __ng_typecheck__.ts file).
Previously, shim generation was driven by the `rootFiles` passed to the
compiler as input. These are effectively the `files` listed in the
`tsconfig.json`. Each shim generator (e.g. the `FactoryGenerator`) would
examine the `rootFiles` and produce a list of shim file names which it would
be responsible for generating. These names would then be added to the
`rootFiles` when the program was created.
The fatal flaw here is that `rootFiles` does not always account for all of
the files in the program. In fact, it's quite rare that it does. Users don't
typically specify every file directly in `files`. Instead, they rely on
TypeScript, during program creation, starting with a few root files and
transitively discovering all of the files in the program.
This happens, however, during `ts.createProgram`, which is too late to add
new files to the `rootFiles` list.
As a result, shim generation was only including shims for files actually
listed in the `tsconfig.json` file, and not for the transitive set of files
in the user's program as it should.
This commit completely rewrites shim generation to use a different technique
for adding files to the program, inspired by View Engine's shim generator.
In this new technique, as the program is being created and `ts.SourceFile`s
are being requested from the `NgCompilerHost`, shims for those files are
generated and a reference to them is patched onto the original file's
`ts.SourceFile.referencedFiles`. This causes TS to think that the original
file references the shim, and causes the shim to be included in the program.
The original `referencedFiles` array is saved and restored after program
creation, hiding this little hack from the rest of the system.
The new shim generation engine differentiates between two kinds of shims:
top-level shims (such as the flat module entrypoint file and
__ng_typecheck__.ts) and per-file shims such as ngfactory or ngsummary
files. The former are included via `rootFiles` as before, the latter are
included via the `referencedFiles` of their corresponding original files.
As a result of this change, shims are now correctly generated for all files
in the program, not just the ones named in `tsconfig.json`.
A few mitigating factors prevented this bug from being realized until now:
* in g3, `files` does include the transitive closure of files in the program
* in CLI apps, shims are not really used
This change also makes use of a novel technique for associating information
with source files: the use of an `NgExtension` `Symbol` to patch the
information directly onto the AST object. This is used in several
circumstances:
* For shims, metadata about a `ts.SourceFile`'s status as a shim and its
origins are held in the extension data.
* For original files, the original `referencedFiles` are stashed in the
extension data for later restoration.
The main benefit of this technique is a lot less bookkeeping around `Map`s
of `ts.SourceFile`s to various kinds of data, which need to be tracked/
invalidated as part of incremental builds.
This technique is based on designs used internally in the TypeScript
compiler and is serving as a prototype of this design in ngtsc. If it works
well, it could have benefits across the rest of the compiler.
PR Close#36211
The compiler needs to track the dependencies of a component, including any
NgModules which happen to be present in a component's scope. If an upstream
NgModule changes, any downstream components need to have their templates
re-compiled and re-typechecked.
Previously, the compiler handled this well for the A -> B -> C case where
module A imports module B which re-exports module C. However, it fell apart
in the A -> B -> C -> D case, because previously tracking focused on changes
to components/directives in the scope, and not NgModules specifically.
This commit introduces logic to track which NgModules contributed to a given
scope, and treat them as dependencies of any components within.
This logic also contains a bug, which is intentional for now. It
purposefully does not track transitive dependencies of the NgModules which
contribute to a scope. If it did, using the current dependency system, this
would treat all components and directives (even those not exported into the
scope) as dependencies, causing a major performance bottleneck. Only those
dependencies which contributed to the module's export scope should be
considered, but the current system is incapable of making this distinction.
This will be fixed at a later date.
PR Close#36211
The legacy HTTP package was deprecated in v5 with the launch of
@angular/common/http. The legacy package hasn't been published
since v7, and will therefore not include a migration.
PR Close#27038
Remove TypeScript 3.6 and 3.7 support from Angular along with tests that
ensure those TS versions work.
BREAKING CHANGE: typescript 3.6 and 3.7 are no longer supported, please
update to typescript 3.8
PR Close#36329
This function needs to deduplicate the paths that are found from the
paths mappings. Previously this deduplication was not linear and also
called the expensive `relative()` function many times.
This commit, suggested by @JoostK, reduces the complexity of the deduplication
by using a tree structure built from the segments of each path.
PR Close#36881
Previously the `basePaths` were computed when the finder was instantiated.
This was a waste of effort in the case that the targeted entry-point is already
processed.
This change makes the computation of `basePaths` lazy, so that the work is
only done if they are actually needed.
Fixes#36874
PR Close#36881
In TS 3.9 the compiler will start to wrap ES2015 classes in an IIFE to help with
tree-shaking when the class has "associated" statements.
E.g.
```ts
let PlatformLocation = /** @class */ (() => {
...
class PlatformLocation {
}
...
return PlatformLocation;
})();
```
This commit updates `Esm2015ReflectionHost` to support this format.
PR Close#36884
Previously the `AsyncLocker` was configured to only wait
50x500ms before timing out. This is 25secs, which is often
less than a normal run of ngcc, so the chance of a timeout
flake was quite high.
The default is now 500x500ms, which is 250secs. If this is
too high for some projects then it can be changed via the
`ngcc.config.js` project file.
PR Close#36838
The commit adds support to the ngcc.config.js file for setting the
`retryAttempts` and `retryDelay` options for the `AsyncLocker`.
An integration test adds a new check for a timeout and actually uses the
ngcc.config.js to reduce the timeout time to prevent the test from taking
too long to complete.
PR Close#36838
Strictly this method only returns config for packages. So this commit
renames it to `getPackageConfig()`, which frees us up to add other
"getXxxxConfig()` methods later.
PR Close#36838
This test is basically duplicated (and slightly enhanced) in the
following test. So it is superfluous. (I suspect it was the result
of a broken rebase.)
PR Close#36838
When ngcc fails due to a timeout waiting for another process
to complete, it was not failing with a unique exit code, so that it
was not possible to know if the process can be restarted; compared to
ngcc failing for some more fatal reason.
Now if ngcc exits because of a timeout, the exit code will be 177.
PR Close#36838
When ngcc is having to pause and wait for another process
it provides a message to the user. This commit adds the extra
information about how to remove the lockfile if desired, since
this message is not shown if you Ctrl-C out of the process before
the timeout period ends.
PR Close#36838
Now that `ngcc/src/ngcc_options` imports `FileWriter` type, there is a
circular dependency detected by the `ts-circular-deps:check` lint check:
```
ngcc/src/ngcc_options.ts
→ ngcc/src/writing/file_writer.ts
→ ngcc/src/packages/entry_point_bundle.ts
→ ngcc/src/ngcc_options.ts
```
This commit moves the `PathMappings` type (and related helpers) to a
separate file to avoid the circular dependency.
NOTE:
The circular dependency was only with taking types into account. There
was no circular dependency for the actual (JS) code.
PR Close#36626
When running in parallel mode, worker processes forward errors thrown
during task processing to the master process, which in turn exits with
an error.
However, there are cases where the error is not directly related to
processing the entry-point. One such case is when there is not enough
memory (for example, due to all the other tasks being processed
simultaneously).
Previously, an `ENOMEM` error thrown on a worker process would propagate
to the master process, eventually causing ngcc to exit with an error.
Example failure: https://circleci.com/gh/angular/angular/682198
This commit improves handling of these low-memory situations by
detecting `ENOMEM` errors and killing the worker process, thus allowing
the master process to decide how to handle that. The master process will
put the task back into the tasks queue and continue processing tasks
with the rest of the worker processes (and thus with lower memory
pressure).
PR Close#36626
Previously, when the last worker process crashed, the master process
would try to re-spawn it indefinitely. This could lead to an infinite
loop (if for some reason the worker process kept crashing).
This commit avoids this by limiting the number of re-spawn attempts to
3, after which ngcc will exit with an error.
PR Close#36626
Previously, when running in parallel mode and a worker process crashed
while processing a task, it was not possible for ngcc to continue
without risking ending up with a corrupted entry-point and therefore it
exited with an error. This, for example, could happen when a worker
process received a `SIGKILL` signal, which was frequently observed in CI
environments. This was probably the result of Docker killing processes
due to increased memory pressure.
One factor that amplifies the problem under Docker (which is often used
in CI) is that it is not possible to distinguish between the available
CPU cores on the host machine and the ones made available to Docker
containers, thus resulting in ngcc spawning too many worker processes.
This commit addresses these issues in the following ways:
1. We take advantage of the fact that files are written to disk only
after an entry-point has been fully analyzed/compiled. The master
process can now determine whether a worker process has not yet
started writing files to disk (even if it was in the middle of
processing a task) and just put the task back into the tasks queue if
the worker process crashes.
2. The master process keeps track of the transformed files that a worker
process will attempt to write to disk. If the worker process crashes
while writing files, the master process can revert any changes and
put the task back into the tasks queue (without risking corruption).
3. When a worker process crashes while processing a task (which can be a
result of increased memory pressure or too many worker processes),
the master process will not try to re-spawn it. This way the number
or worker processes is gradually adjusted to a level that can be
accomodated by the system's resources.
Examples of ngcc being able to recover after a worker process crashed:
- While idling: https://circleci.com/gh/angular/angular/682197
- While compiling: https://circleci.com/gh/angular/angular/682209
- While writing files: https://circleci.com/gh/angular/angular/682267
Jira issue: [FW-2008](https://angular-team.atlassian.net/browse/FW-2008)
Fixes#36278
PR Close#36626
This commit adds a `revertFile()` method to `FileWriter`, which can
revert a transformed file (and its backup - if any) written by the
`FileWriter`.
In a subsequent commit, this will be used to allow ngcc to recover
when a worker process crashes in the middle of processing a task.
PR Close#36626
With this commit, the master process will keep track of the transformed
files that each worker process is intending to write to disk.
In a subsequent commit, this info will be used to allow ngcc to recover
when a worker process crashes in the middle of processing a task.
PR Close#36626
With this commit, worker processes will notify the master process about
the transformed files they are about to write to disk before starting
writing them.
In a subsequent commit, this will be used to allow ngcc to recover when
a worker process crashes in the middle of processing a task.
PR Close#36626
This commit enhances the `CompileFn`, which is used to process each
entry-point, to support running a passed-in callback (and wait for it to
complete) before proceeding with writing the transformed files to disk.
This functionality is currently not used. In a subsequent commit, it
will be used for passing info from worker processes to the master
process that will allow ngcc to recover when a worker process crashes in
the middle of processing a task.
PR Close#36626
Rename the `markTaskCompleted()` method to be consistent with the other
similar methods of `TaskQueue` (`markAsFailed()` and
`markAsUnprocessed()`).
PR Close#36626
This commit adds support for stopping processing an in-progress task
and moving it back to the list of pending tasks.
In a subsequent commit, this will be used to allow ngcc to recover when
a worker process crashes in the middle of processing a task.
PR Close#36626
Previously, ngcc would run in parallel mode (using the
`ClusterExecutor`) when there were at least 2 CPU cores (and all other
requirements where met). On systems with just 2 CPU cores, this meant
there would only be one worker process (since one CPU core is always
reserved for the master process). In these cases, the tasks would still
be processed serially (on the one worker process), but we would also pay
the overhead of communicating between the master and worker processes.
This commit fixes this by only running in parallel mode if there are
more than 2 CPU cores (i.e. at least 2 worker processes).
PR Close#36626
Previously, the "Compiling <entryPoint>" log message was printed before
starting to analyze and transform files, but after creating the
`EntryPointBundle` (which includes creating the TS program).
Since creating the `EntryPointBundle` involves some work, it is more
accurate to move the log message before creating the bundle.
PR Close#36626
An enum declaration in TypeScript code will be emitted into JavaScript
as a regular variable declaration, with the enum members being declared
inside an IIFE. For ngcc to support interpreting such variable
declarations as enum declarations with its members, ngcc needs to
recognize the enum declaration emit structure and extract all member
from the statements in the IIFE.
This commit extends the `ConcreteDeclaration` structure in the
`ReflectionHost` abstraction to be able to capture the enum members
on a variable declaration, as a substitute for the original
`ts.EnumDeclaration` as it existed in TypeScript code. The static
interpreter has been extended to handle the extracted enum members
as it would have done for `ts.EnumDeclaration`.
Fixes#35584
Resolves FW-2069
PR Close#36550
The html parser already normalizes line endings (converting `\r\n` to `\n`)
for most text in templates but it was missing the expressions of ICU expansions.
In ViewEngine backticked literal strings, used to define inline templates,
were already normalized by the TypeScript parser.
In Ivy we are parsing the raw text of the source file directly so the line
endings need to be manually normalized.
This change ensures that inline templates have the line endings of ICU
expression normalized correctly, which matches the ViewEngine.
In ViewEngine external templates, defined in HTML files, the behavior was
different, since TypeScript was not normalizing the line endings.
Specifically, ICU expansion "expressions" are not being normalized.
This is a problem because it means that i18n message ids can be different on
different machines that are setup with different line ending handling,
or if the developer moves a template from inline to external or vice versa.
The goal is always to normalize line endings, whether inline or external.
But this would be a breaking change since it would change i18n message ids
that have been previously computed. Therefore this commit aligns the ivy
template parsing to have the same "buggy" behavior for external templates.
There is now a compiler option `i18nNormalizeLineEndingsInICUs`, which
if set to `true` will ensure the correct non-buggy behavior. For the time
being this option defaults to `false` to ensure backward compatibility while
allowing opt-in to the desired behavior. This option's default will be
flipped in a future breaking change release.
Further, when this option is set to `false`, any ICU expression tokens,
which have not been normalized, are added to the `ParseResult` from the
`HtmlParser.parse()` method. In the future, this collection of tokens could
be used to diagnose and encourage developers to migrate their i18n message
ids. See FW-2106.
Closes#36725
PR Close#36741
The cached file-system was implemented to speed up ngcc
processing, but in reality most files are not accessed many times
and there is no noticeable degradation in speed by removing it.
Benchmarking `ngcc -l debug` for AIO on a local machine
gave a range of 196-236 seconds with the cache and 197-224
seconds without the cache.
Moreover, when running in parallel mode, ngcc has a separate
file cache for each process. This results in excess memory usage.
Notably the master process, which only does analysis of entry-points
holds on to up to 500Mb for AIO when using the cache compared to
only around 30Mb when not using the cache.
Finally, the file-system cache being incorrectly primed with file
contents before being processed has been the cause of a number
of bugs. For example https://github.com/angular/angular-cli/issues/16860#issuecomment-614694269.
PR Close#36687
The change in e041ac6f0d
to support sending unlocker process output to the main ngcc
console output prevents messages require that the main process
relinquishes the event-loop to allow the `stdout.on()` handler to
run. This results in none of the messages being written when ngcc
is run in `--no-async` mode, and some messages failing to be
written if the main process is killed (e.g. ctrl-C).
It appears that the problem with Windows and detached processes
is known - see https://github.com/nodejs/node/issues/3596#issuecomment-250890218.
But in the meantime, this commit is a workaround, where non-Windows
`inherit` the main process `stdout` while on Windows it reverts
to the async handler approach, which is better than nothing.
PR Close#36637
Prior to this change, there was a problem while matching template attributes, which mistakenly took i18n attributes (that might be present in attrs array after template ones) into account. This commit updates the logic to avoid template attribute matching logic from entering the i18n section and as a result this also allows generating proper i18n attributes sections instead of keeping these attribute in plain form (with their values) in attribute arrays.
PR Close#36422
On Windows, the output of a detached process (such as the unlocker
process used by `LockFileWithChildProcess`) is not shown in the parent
process' stdout.
This commit addresses this by piping the spawned process' stdin/stdout
and manually writing to the parent process' stdout.
PR Close#36569
The current ngcc lock-file strategy spawns a new process in order to
capture a potential `SIGINT` and remove the lock-file. For more
information see #35861.
Previously, this unlocker process was spawned as soon as the `LockFile`
was instantiated in order to have it available as soon as possible
(given that spawning a process is an asynchronous operation). Since the
`LockFile` was instantiated and passed to the `Executor`, this meant
that an unlocker process was spawned for each cluster worker, when
running ngcc in parallel mode. These processes were not needed, since
the `LockFile` was not used in cluster workers, but we still had to pay
the overhead of each process' own memory and V8 instance.
(NOTE: This overhead was small compared to the memory consumed by ngcc's
normal operations, but still unnecessary.)
This commit avoids the extra processes by only spawning an unlocker
process when running on the cluster master process and not on worker
processes.
PR Close#36569
For some reason (possibly related to async/await promises)
the ngcc process is not exiting when spawned from the CLI
when there has been an error (such as when it timesout waiting
for a lockfile to become free).
Calling `process.exit()` directly fixes this.
Fixes#36616
PR Close#36622
Previously, when we needed to detect whether a file is external to a
package, we only checked whether the relative path to the file from the
package's root started with `..`. This would detect external imports
when the packages were siblings (e.g. peer dependencies or hoisted to
the top of `node_modules/` by the package manager), but would fail to
detect imports from packages located in nested `node_modules/` as
external. For example, importing `node_modules/foo/node_modules/bar`
from a file in `node_modules/foo/` would be considered internal to the
`foo` package.
This could result in processing/analyzing more files than necessary.
More importantly it could lead to errors due to trying to analyze
non-Angular packages that were direct dependencies of Angular packages.
This commit fixes it by also verifying that the relative path to a file
does not start with `node_modules/`.
Jira issue: [FW-2068](https://angular-team.atlassian.net/browse/FW-2068)
Fixes#36526
PR Close#36559
The base path for package and entry-points is known so there is
no need to store these in the file. Also this commit avoids storing
empty arrays unnecessarily.
PR Close#36486
Previously, even if an entry-point did not need to be processed,
ngcc would always parse the files of the entry-point to compute
its dependencies. This can take a lot of time for large node_modules.
Now these dependencies are cached in the entry-point manifest,
and read from there rather than computing them every time.
See https://github.com/angular/angular/issues/36414\#issuecomment-608401834
FW-2047
PR Close#36486
When the compiler needs to convert a type reference to a value
expression, it may encounter a type that refers to a namespaced symbol.
Such namespaces need to be handled specially as there's various forms
available. Consider a namespace named "ns":
1. One can refer to a namespace by itself: `ns`. A namespace is only
allowed to be used in a type position if it has been merged with a
class, but even if this is the case it may not be possible to convert
that type into a value expression depending on the import form. More
on this later (case a below)
2. One can refer to a type within the namespace: `ns.Foo`. An import
needs to be generated to `ns`, from which the `Foo` property can then
be read.
3. One can refer to a type in a nested namespace within `ns`:
`ns.Foo.Bar` and possibly even deeper nested. The value
representation is similar to case 2, but includes additional property
accesses.
The exact strategy of how to deal with these cases depends on the type
of import used. There's two flavors available:
a. A namespaced import like `import * as ns from 'ns';` that creates
a local namespace that is irrelevant to the import that needs to be
generated (as said import would be used instead of the original
import).
If the local namespace "ns" itself is referred to in a type position,
it is invalid to convert it into a value expression. Some JavaScript
libraries publish a value as default export using `export = MyClass;`
syntax, however it is illegal to refer to that value using "ns".
Consequently, such usage in a type position *must* be accompanied by
an `@Inject` decorator to provide an explicit token.
b. An explicit namespace declaration within a module, that can be
imported using a named import like `import {ns} from 'ns';` where the
"ns" module declares a namespace using `declare namespace ns {}`.
In this case, it's the namespace itself that needs to be imported,
after which any qualified references into the namespace are converted
into property accesses.
Before this change, support for namespaces in the type-to-value
conversion was limited and only worked correctly for a single qualified
name using a namespace import (case 2a). All other cases were either
producing incorrect code or would crash the compiler (case 1a).
Crashing the compiler is not desirable as it does not indicate where
the issue is. Moreover, the result of a type-to-value conversion is
irrelevant when an explicit injection token is provided using `@Inject`,
so referring to a namespace in a type position (case 1) could still be
valid.
This commit introduces logic to the type-to-value conversion to be able
to properly deal with all type references to namespaced symbols.
Fixes#36006
Resolves FW-1995
PR Close#36106
In cc4b813e75 the `getBasePaths()`
function was changed to log a warning if a `basePath()` computed from
the `paths` mappings did not exist. It turns out this is a common and
accepted scenario, so we should not log warnings in this case.
Fixes#36518
PR Close#36525
1. update jasmine to 3.5
2. update @types/jasmine to 3.5
3. update @types/jasminewd2 to 2.0.8
Also fix several cases, the new jasmine 3 will help to create test cases correctly,
such as in the `jasmine 2.x` version, the following case will pass
```
expect(1 == 2);
```
But in jsamine 3, the case will need to be
```
expect(1 == 2).toBeTrue();
```
PR Close#34625
During static evaluation of expressions, the partial evaluator
may come across a binary + operator for which it needs to
evaluate its operands. Any of these operands may be a reference
to an enum member, in which case the enum member's value needs
to be used as literal value, not the enum member reference
itself. This commit fixes the behavior by resolving an
`EnumValue` when used as a literal value.
Fixes#35584
Resolves FW-1951
PR Close#36461
Previously, `isRelativePath()` assumed paths are *nix-style. This caused
Windows-style paths (such as `C:\foo\some-package\some-file.js`) to not
be recognized as "relative" imports.
This commit fixes this by using the OS-agnostic `isRooted()` helper and
also accounting for both styles of path delimiters: `/` and `\`
PR Close#36372
When TypeScript downlevels ES2015+ code to ES5, it uses some helper
functions to emulate some ES2015+ features, such as spread syntax. The
TypeScript compiler can be configured to emit these helpers into the
transpiled code (which is controlled by the `noEmitHelpers` option -
false by default). It can also be configured to import these helpers
from the `tslib` module (which is controlled by the `importHelpers`
option - false by default).
While most of the time the helpers will be either emitted or imported,
it is possible that one configures their app to neither emit nor import
them. In that case, the helpers could, for example, be made available on
the global object. This is what `@nativescript/angular`
v9.0.0-next-2019-11-12-155500-01 does. See, for example, [common.js][1].
Ngcc must be able to detect and statically evaluate these helpers.
Previously, it was only able to detect emitted or imported helpers.
This commit adds support for detecting these helpers if they are neither
emitted nor imported. It does this by checking identifiers for which no
declaration (either concrete or inline) can be found against a list of
known TypeScript helper function names.
[1]: https://unpkg.com/browse/@nativescript/angular@9.0.0-next-2019-11-12-155500-01/common.js
PR Close#36418
The source-map flattening was throwing an error when there
is a cyclic dependency between source files and source-maps.
The error was either a custom one describing the cycle, or a
"Maximum call stack size exceeded" one.
Now this is handled more leniently, resulting in a partially loaded
source file (or source-map) and a warning logged.
Fixes#35727Fixes#35757
Fixes https://github.com/angular/angular-cli/issues/17106
Fixes https://github.com/angular/angular-cli/issues/17115
PR Close#36452
Recently we added support for ignoring specified deep-import
warnings by providing sets of regular expressions within the
`ngcc.config.js` file. But this was only working for the project
level configuration.
This commit fixes ngcc so that it will also read these regular
expressions from package level configuration too.
Fixes#35750
PR Close#36423
The `browser` package.json property is now supported to the same
level as `main` - i.e. it is sniffed for UMD, ESM5 and CommonJS.
The `browser` property can also contain an object with file overrides
but this is not supported by ngcc.
Fixes#36062
PR Close#36396
Previously, `main` was only checked for `umd` or `commonjs`
formats. Now if there are `import` or `export` statements in the
source file it will be deemed to be in `esm5` format.
Fixes#35788
PR Close#36396
The `NgccReflectionHost`s have logic for detecting certain known
declarations (such as `Object.assign()` and TypeScript helpers), which
allows the `PartialEvaluator` to evaluate expressions it would not be
able to statically evaluate otherwise.
In #36089, `DelegatingReflectionHost` was introduced, which delegates to
a TypeScript `ReflectionHost` when reflecting on TypeScript files, which
for ngcc's case means `.d.ts` files of dependencies. As a result, ngcc
lost the ability to detect TypeScript helpers imported from `tslib`,
because `DelegatingReflectionHost` was not able to apply the known
declaration detection logic while reflecting on `tslib`'s `.d.ts` files.
This commit fixes this by ensuring `DelegatingReflectionHost` calls the
`NgccReflectionHost`'s `detectKnownDeclaration()` method as necessary,
even when using the TypeScript `ReflectionHost`.
NOTE:
The previous commit exposed a bug in ngcc that was hidden due to the
tests' being inconsistent with how the `ReflectionHost`s are used in the
actual program. The changes in this commit are verified by ensuring the
failing tests are now passing (hence no new tests are added).
PR Close#36284
In #36089, `DelegatingReflectionHost` was introduced. Under the hood, it
delegates another `NgccReflectionHost` in order to reflect over the
program's source files, while using a different TypeScript
`ReflectionHost` to reflect over `.d.ts` files (which is how external
dependencies are represented in the program).
Previously, the `NgccReflectionHost`s were used directly in tests. This
does not exercise them in the way they are exercised in the actual
program, because (when used directly) they will also reflect on `.d.ts`
files too (instead of delegating to the TypeScript `ReflectionHost`).
This could hide bugs that would happen on the actual program.
This commit fixes this by using the `DelegatingReflectionHost` in the
various `NgccReflectionHost` tests.
NOTE:
This change will cause some of the existing tests to start failing.
These failures demonstrate pre-existing bugs in ngcc, that were hidden
due to the tests' being inconsistent with how the `ReflectionHost`s are
used in the actual program. They will be fixed in the next commit.
PR Close#36284
The `NgccReflectionHost`s have logic for detecting certain known
declarations (such as `Object.assign()` and TypeScript helpers), which
allows the `PartialEvaluator` to evaluate expressions it would not be
able to statically evaluate otherwise.
This commit moves the logic for identifying these known declarations to
dedicated methods. This is in preparation of allowing ngcc's
`DelegatingReflectionHost` (introduced in #36089) to also apply the
known declaration detection logic when reflecting on TypeScript sources.
PR Close#36284
In Ivy, Angular decorators are compiled into static fields that are
inserted into a class declaration in a TypeScript transform. When
targeting Closure compiler such fields need to be annotated with
`@nocollapse` to prevent them from being lifted from a static field into
a variable, as that would prevent the Ivy runtime from being able to
find the compiled definitions.
Previously, there was a bug in TypeScript where synthetic comments added
in a transform would not be emitted at all, so as a workaround a global
regex-replace was done in the emit's `writeFile` callback that would add
the `@nocollapse` annotation to all static Ivy definition fields. This
approach is no longer possible when ngtsc is running as TypeScript
plugin, as a plugin cannot control emit behavior.
The workaround is no longer necessary, as synthetic comments are now
properly emitted, likely as of
https://github.com/microsoft/TypeScript/pull/22141 which has been
released with TypeScript 2.8.
This change is required for running ngtsc as TypeScript plugin in
Bazel's `ts_library` rule, to move away from the custom `ngc_wrapped`
approach.
Resolves FW-1952
PR Close#35932
Ngcc supports providing a project-level configuration to affect how
certain dependencies are processed and also has a built-in fallback
configuration for some unmaintained packages. Each entry in these
configurations could be scoped to specific versions of a package by
providing a version range. If no version range is provided for a
package, it defaults to `*` (with the intention of matching any
version).
Previously, the installed version of a package was tested against the
version range using the [semver][1] package's `satisfies()` function
with the default options. By default, `satisfies()` does not match
pre-releases (see [here][2] for more details on reasoning). While this
makes sense when determining what version of a dependency to install
(trying to avoid unexpected breaking changes), it is not desired in the
case of ngcc.
This commit fixes it by explicitly specifying that pre-release versions
should be matched normally.
[1]: https://www.npmjs.com/package/semver
[2]: https://github.com/npm/node-semver#prerelease-tags
PR Close#36370
Previously, a bad baseUrl or path mapping passed to an `EntryPointFinder`
could cause the original `sourceDirectory` to be superceded by a higher
directory. This could result in none of the sourceDirectory entry-points being
processed.
Now missing basePaths computed from path-mappings are discarded with
a warning. Further, if the `baseUrl` is the root directory then a warning is
given as this is most likely an error in the tsconfig.json.
Resolves#36313Resolves#36283
PR Close#36331
The previous optimizations in #35756 to the
`DirectoryWalkerEntryPointFinder` were over zealous
with regard to packages that have entry-points stored
in "container" directories in the package, where the
container directory was not an entry-point itself.
Now we will also walk such "container" folders as long
as they do not contain `.js` files, which we regard as an
indicator that the directory will not contain entry-points.
Fixes#36216
PR Close#36305
This commit simplifies the `DirectoryWalkerEntryPointFinder` inter-method
calling to make it easier to follow, and also to support controlling
walking of a directory based on its children.
PR Close#36305
Previously we only searched for package paths below the set of `basePaths`
that were computed from the `basePath` provided to ngcc and the set of
`pathMappings`.
In some scenarios, such as hoisted packages, the entry-point is not within
any of the `basePaths` identified above. For example:
```
project
packages
app
node_modules
app-lib (depends on lib1)
node_modules
lib1 (depends on lib2)
node_modules
lib2 (depends on lib3/entry-point)
lib3
entry-point
```
When CLI is compiling `app-lib` ngcc will be given
`project/packages/app/node_modules` as the `basePath.
If ngcc is asked to target `lib2`, the `targetPath` will be
`project/node_modules/lib1/node_modules/lib2`.
Since `lib2` depends upon `lib3/entry-point`, ngcc will need to compute
the package path for `project/node_modules/lib3/entry-point`.
Since `project/node_modules/lib3/entry-point` is not contained in the `basePath`
`project/packages/app/node_modules`, ngcc failed to compute the `packagePath`
correctly, instead assuming that it was the same as the entry-point path.
Now we also consider the nearest `node_modules` folder to the entry-point
path as an additional `basePath`. If one is found then we use the first
directory directly below that `node_modules` directory as the package path.
In the case of our example this extra `basePath` would be `project/node_modules`
which allows us to compute the `packagePath` of `project/node_modules/lib3`.
Fixes#35747
PR Close#36249
Previously ngcc never preserved whitespaces but this is at odds
with how the ViewEngine compiler works. In ViewEngine, library
templates are recompiled with the current application's tsconfig
settings, which meant that whitespace preservation could be set
in the application tsconfig file.
This commit allows ngcc to use the `preserveWhitespaces` setting
from tsconfig when compiling library templates. One should be aware
that this disallows different projects with different tsconfig settings
to share the same node_modules folder, with regard to whitespace
preservation. But this is already the case in the current ngcc since
this configuration is hard coded right now.
Fixes#35871
PR Close#36189
This commit augments the `FactoryDef` declaration of Angular decorated
classes to contain information about the parameter decorators used in
the constructor. If no constructor is present, or none of the parameters
have any Angular decorators, then this will be represented using the
`null` type. Otherwise, a tuple type is used where the entry at index `i`
corresponds with parameter `i`. Each tuple entry can be one of two types:
1. If the associated parameter does not have any Angular decorators,
the tuple entry will be the `null` type.
2. Otherwise, a type literal is used that may declare at least one of
the following properties:
- "attribute": if `@Attribute` is present. The injected attribute's
name is used as string literal type, or the `unknown` type if the
attribute name is not a string literal.
- "self": if `@Self` is present, always of type `true`.
- "skipSelf": if `@SkipSelf` is present, always of type `true`.
- "host": if `@Host` is present, always of type `true`.
- "optional": if `@Optional` is present, always of type `true`.
A property is only present if the corresponding decorator is used.
Note that the `@Inject` decorator is currently not included, as it's
non-trivial to properly convert the token's value expression to a
type that is valid in a declaration file.
Additionally, the `ComponentDefWithMeta` declaration that is created for
Angular components has been extended to include all selectors on
`ng-content` elements within the component's template.
This additional metadata is useful for tooling such as the Angular
Language Service, as it provides the ability to offer suggestions for
directives/components defined in libraries. At the moment, such
tooling extracts the necessary information from the _metadata.json_
manifest file as generated by ngc, however this metadata representation
is being replaced by the information emitted into the declaration files.
Resolves FW-1870
PR Close#35695
When computing the dependencies between packages which are not in
node_modules, we may need to rely upon path-mappings to find the path
to the imported entry-point.
This commit allows ngcc to use the path-mappings from a tsconfig
file to find dependencies. By default any tsconfig.json file in the directory
above the `basePath` is loaded but it is possible to use a path to a
specific file by providing the `tsConfigPath` property to mainNgcc,
or to turn off loading any tsconfig file by setting `tsConfigPath` to `null`.
At the command line this is controlled via the `--tsconfig` option.
Fixes#36119
PR Close#36180
When two entry-points overlap, ngcc may attempt to process some
files twice. Previously, when this occured ngcc would just exit with an
error preventing any other entry-points from being processed.
This commit changes ngcc so that if `errorOnFailedEntryPoint` is false, it will
simply log an error and continue to process entry-points. This is useful when
ngcc is processing the entire node_modules folder and there are some invalid
entry-points that the project doesn't actually use.
PR Close#36083
Previously, when an entry-point contained code that caused its compilation
to fail, ngcc would exit in the middle of processing, possibly leaving other
entry-points in a corrupt state.
This change adds a new `errorOnFailedEntryPoint` option to `mainNgcc` that
specifies whether ngcc should exit immediately or log an error and continue
processing other entry-points.
The default is `false` so that ngcc will not error but continue processing
as much as possible. This is useful in post-install hooks, and async CLI
integration, where we do not have as much control over which entry-points
should be processed.
The option is forced to true if the `targetEntryPointPath` is provided,
such as the sync integration with the CLI, since in that case it is targeting
an entry-point that will actually be used in the current project so we do want
ngcc to exit with an error at that point.
PR Close#36083
Later when we implement the ability to continue processing when tasks have
failed to compile, we will also need to avoid processing tasks that depend
upon the failed task.
This refactoring exposes this list of dependent tasks in a way that can be
used to skip processing of tasks that depend upon a failed task.
It also changes the blocking model of the parallel mode of operation so
that non-typings tasks are now blocked on their corresponding typings task.
Previously the non-typings tasks could be triggered to run in parallel to
the typings task, since they do not have a hard dependency on each other,
but this made it difficult to skip task correctly if the typings task failed,
since it was possible that a non-typings task was already in flight when
the typings task failed. The result of this is a small potential degradation
of performance in async parallel processing mode, in the rare cases that
there were not enough unblocked tasks to make use of all the available
workers.
PR Close#36083
Alex Rickabaugh
Pete Bacon Darwin
Paul Gschwendtner
Igor Minar
Adam Plumer
Andrew Scott
George Kalpakas
JoostK
Andrew Kushnir
Joey Perrott
JiaLiPassion
Alan Agius
Ayaz Hafiz