Until we have comprehensive E2E tests, it's too risky to change the
reflector_host Misko wrote before final. But google3 uses path mapping
and needs all imports to be and all paths to be canonicalized to
the longest rootDir.
This change introduces a subclass of ReflectorHost with overrides for methods
that differ. After final (or when we have good tests), we'll refactor
them back into one class.
Often it is useful to test a component without rendering certain directives/components
in its template because these directives require some complicated setup.
You can do that by using NO_ERRORS_SCHEMA.
TestBed.configureTestingModule({
schemas: [NO_ERRORS_SCHEMA]
});
This would disable all schema checks in your tests.
Closes#10503
It is possible for code in `beforeEach` to capture and fork a zone
(for example creating `NgZone` in `beforeEach`). Subsequently the code
in `it` may chose to do `fakeAsync`. The issue is that because the
code in `it` can use `NgZone` from the `beforeEach`. it effectively can
escape the `fakeAsync` zone. A solution is to run all of the test in
`ProxyZone` which allows a test to dynamically replace the rules at any
time. This allows the `beforeEach` to fork a zone, and then `it` to
retroactively became `fakeAsync` zone.
When creating a new Headers object using an existing Headers object
the existing Headers map is copied by reference. Therefore adding a
new Header value to the new Headers object also added this value to
the existing Headers object which is not in accordance with the
spec.
This commit alters the constructor to create a deep copy of existing
Headers maps and therefore unlink existing Headers from new Headers.
Closes#6845
BREAKING CHANGE:
any code which relies on the fact that a newly
created Headers object is referencing an existing Headers map is
now broken, but that should normally not be the case since this
behavior is not documented and not in accordance with the spec.
BREAKING CHANGE: Animations defined using an at-symbol prefix that are
not property bound are now invalid.
```html
<!-- this is now invalid -->
<div @flip="flipState"></div>
<!-- change that to -->
<div [@flip]="flipState"></div>
```
BREAKING CHANGE: Animations that are not bound using the at-symbol
prefix using `animate-` must now be preixed using `bind-animate-`.
```html
<!-- this is now invalid -->
<div animate-flip="flipState"></div>
<!-- is valid now -->
<div bind-animate-flip="flipState"></div>
```
Closes#10825
Remove TestComponentBuilder, addProviders, and withProviders. These
were deprecated in rc5 - see the changelog for update information.
Note - this does not actually remove the functions, but makes them
internal only. They will be removed from the codebase entirely
at a later time.
Closes#9751
BREAKING CHANGE:
These forms of providers are no longer accepted:
bind(MyClass).toFactory(...)
new Provider(MyClass, toFactory: ...)
We now only accept:
{provider: MyClass, toFactory: ...}
BREAKING CHANGE: previously deprecated SystemJsComponentResolver and SystemJsCmpFactoryResolver have been removed.
Please follow deprecation instructions to migrate your code.
BREAKING CHANGE: previously deprecated coreBootstrap and coreLoadAndBootstrap have been removed.
Please follow deprecation instructions to migrate your code.
BREAKING CHANGE: previously deprecated DirectiveMetadataType#properties and DirectiveMetadataType#events were removed; see deprecation notice for migration instructions.
This fixes an issue where `TestBed.overrideComponent(MyComp, {})`
would remove some properties including `providers` from the component.
This was due to the override not properly dealing with getter fields
on subclasses.
BREAKING CHANGE:
The deprecated `provideForms()` and `disableDeprecatedForms()` functions have been removed. Please import the `FormsModule` or the `ReactiveFormsModule` from @angular/forms instead.
BREAKING CHANGE:
The deprecated forms APIs in @angular/common have been removed. Please update to the new forms API in @angular/forms. See angular.io for more information.
Closes#9729
BREAKING CHANGE:
`Type` is now `Type<T>` which means that in most cases you have to
use `Type<any>` in place of `Type`.
We don't expect that any user applications use the `Type` type.
Remove test setup functions which were deprecated in rc5. See the
changelog for rc5 for how to update. In brief, instead of
`setBaseTestProviders`, use `TestBed.initTestEnvironment`.
We changed the bootstrap order:
1. create NgZone
2. bootstrap ng1 inside NgZone and upgrade ng1 components to ng2 components.
3. bootstrap ng2 with NgZone
Note: Previous footgun behavior was: bootstrap ng2 first to extract NgZone, so that ng1 bootstrap can happen in NgZone. This meant that if ng2 bootstrap eagerly compiled a component which contained ng1 components, then we did not have complete metadata.
BREAKING CHANGE: UpgradeAdapter.addProvider are now deprecated in favor of passing in an NgModule into the adapter's constructor
Before:
```
let upgradeAdapter = new UpgradeAdapter();
upgradeAdapter.addProviders([myProvidersArray);
```
After:
```
@NgModule({
providers: myProvidersArray
})
class MyModule {}
let upgradeAdapter = new UpgradeAdapter(MyModule);
```
Currently in the `linker/compiler.ts` file, the **same identifier** is used in **two declarations**:
```typescript
export type CompilerOptions = { … }
…
export const CompilerOptions = new OpaqueToken('compilerOptions');
```
This breaks the API doc generation. I’m surprised that this was not flagged by the tsc.
The duplicate declaration was introduced in 46b212706b.
Prior to this change `ngc` would place generated files which refer
to components in the node_modules into the node_module. This is an
issue. Now all of the files are forced into a single directory
as specified in `tsconfig.json` by the `genDir` option.
see: https://docs.google.com/document/d/1OgP1RIpZ-lWUc4113J3w13HTDcW-1-0o7TuGz0tGx0g
Because
- `Form` is **exported** -- see line 30/31 of
`modules/@angular/forms/src/forms.ts`: i.e., <br>`export {Form} from
'./directives/form_interface'`; and
- Methods of `Form`, which are public, have an
`AbstractFormGroupDirective` parameter;
e.g.,<br>`Form.getFormGroup(dir: AbstractFormGroupDirective):
FormGroup`.
Then it makes sense for `AbstractFormGroupDirective` to be
public/exported too. In any case, if it isn't exported then the **API
docs for `Form` don't get generated properly.**
BREAKING CHANGE:
- `ApplicationRef.run` is deprecated. Use `NgZone.run` directly
- `ApplicationRef.injector` is deprecated. Inject an `Injector` or
use `NgModuleRef.injector` instead
- `ApplicationRef.zone` is deprecated. Inject `NgZone` instead.
`ApplicationRef.bootstrap` is supposed to be run inside of `ngDoBootstrap` method
of the module that is bootstrapped, and that method already runs inside of the
zone.
This class allows any provider to know and wait for the initialization of the
application. This functionality previously was tied to `ApplicationRef`.
BREAKING CHANGE:
- `ApplicationRef.waitForAsyncInitializers` is deprecated. Use
`AppInitStatus.donePromise` / `AppInitStatus.done` instead.
If a `@NgModule` has a `bootstrap` property, `PlatformRef.bootstrapModule` /
`PlatformRef.bootstrapModuleFactory` will automatically bootstrap the components
listed in there.
If such a property does not exist, `PlatformRef.bootstrapModule` /
`PlatformRef.bootstrapModuleFactory` will try to call the method `ngDoBootstrap(appRef: ApplicationRef)` on the module class.
Otherwise an error is reported.
Using the `registerBootstrapListener` easily lead to race condition
and needed dependencies on `ApplicationRef`.
BREAKING CHANGE:
- `ApplicationRef.registerBootstrapListener` is deprecated. Provide a multi
provider for the new token `APP_BOOTSTRAP_LISTENER` instead.
Note about the addition of `beforeEach(fakeAsync(inject(…))))` in some tests:
`ApplicationRef` is now using `ngOnDestroy` and there is eager,
including all of its dependencies which contain `NgZone`.
The additional `fakeAsync` in `beforeEach` ensures that `NgZone`
uses the fake async zone as parent, and not the root zone.
BREAKING CHANGE (via deprecations):
- `ApplicationRef.dispose` is deprecated. Destroy the module that was
created during bootstrap instead by calling `NgModuleRef.destroy`.
- `AplicationRef.registerDisposeListener` is deprecated.
Use the `ngOnDestroy` lifecycle hook for providers or
`NgModuleRef.onDestroy` instead.
- `disposePlatform` is deprecated. Use `destroyPlatform` instead.
- `PlatformRef.dipose()` is deprecated. Use `PlatformRef.destroy()`
instead.
- `PlatformRef.registerDisposeListener` is deprecated. Use
`PlatformRef.onDestroy` instead.
- `PlaformRef.diposed` is deprecated. Use `PlatformRef.destroyed`
instead.
This is needed for the case if a `beforeEach` instantiates
`NgZone`and the `it` uses
`TestComponentBuilder.createFakeAsync`.
Otherwise the `NgZone` will use the root zone as parent,
and `TestComponentBuilder.createFakeAsync` will always return
undefined as `tick` does not forward promises created
under the zone of `NgZone`.
This makes `bootstrapModuleFactory` wait for promises
returned by `APP_INITIALIZER`s, also making `bootstrapModuleFactory` async.
I.e. now `bootstrapModule` and `bootstrapModuleFactory` behave in the
same way.
This ensures that all code from module instantiation, to creating
`ApplicationRef`s as well as calling `APP_INITIALIZERS` is run
in the Angular zone.
This also moves the invocation of the initializers from the `ApplicationRef`
constructor into the `bootstrapModuleFactory` call, allowing initializers
to get a hold of `ApplicationRef` (see #9101).
Fixes#9101Fixes#10363Fixes#10205
The methods on `ViewResolverMock` have been merged into `DirectiveResolver`.
BREAKING CHANGE:
- ES5 users can no longer use the `View(…)` function to provide `ViewMetadata`.
This mirrors the removal of the `@View` decorator a while ago.
Prior to this fix [ngClass] would remove all dynamic classes
when destroyed. It's essential that classes are persisted such
that remove-based animations will still be stylistically correct.
This patch fixes this issue.
Closes#10008Closes#10303
Previously, Angular would warn users when simply re-encoding text
outside of the ASCII range. While harmless, the log spam was annoying.
With this change, Angular specifically tracks whether anything was
stripped during sanitization, and only reports a warning if so.
Fixes#10206.
BREAKING CHANGES:
- `browserPlatform`/`browserDynamicPlatform`/... have been deprecated and renamed into `platformBrowser`/`platformBrowserDynamic`/....
- `bootstrapModule` and `bootstrapModuleFactory` have been moved to be members of `PlaformRef`.
E.g. `platformBrowserDynamic().bootstrapModule(MyModule)`.
This allows Angular to error on unknown properties,
allowing applications that don’t use custom elements
to get better error reporting.
Part of #10043
BREAKING CHANGE:
- By default, Angular will error during parsing
on unknown properties,
even if they are on elements with a `-` in their name
(aka custom elements). If you application is using
custom elements, fill the new parameter `@NgModule.schemas`
with the value `[CUSTOM_ELEMENTS_SCHEMA]`.
E.g. for bootstrap:
```
bootstrap(MyComponent, {schemas: [CUSTOM_ELEMENTS_SCHEMA]});
```
Part of #10043
BREAKING CHANGE:
- `@Component.precompile` was renamed to `@Component.entryComponents`
(old property still works but is deprecated)
- `ANALYZE_FOR_PRECOMPILE` was renamed to `ANALYZE_FOR_ENTRY_COMPONENTS` (no deprecations)
This contains major changes to the compiler, bootstrap of the platforms
and test environment initialization.
Main part of #10043Closes#10164
BREAKING CHANGE:
- Semantics and name of `@AppModule` (now `@NgModule`) changed quite a bit.
This is actually not breaking as `@AppModules` were not part of rc.4.
We will have detailed docs on `@NgModule` separately.
- `coreLoadAndBootstrap` and `coreBootstrap` can't be used any more (without migration support).
Use `bootstrapModule` / `bootstrapModuleFactory` instead.
- All Components listed in routes have to be part of the `declarations` of an NgModule.
Either directly on the bootstrap module / lazy loaded module, or in an NgModule imported by them.
Some test cases incorrectly rely on the side effect of other test cases
importing `NgMatchers`. This commit fixes this by making `expect` in
`core/testing_internal` properly typed.
Resource URLs are strictly "more" trustworthy than plain URLs, so trusting them maintains the same level of security while avoiding to break people when we downgrade a resource URL context to a plain URL context.
BREAKING CHANGE
Previously both imperative (router.navigate) and declarative (routerLink) navigations
would preserve the current query params and fragment. This behavior turned out to
be confusing. This commit changes it.
Now, neither is preserved by default. To preserve them, you need to do the following:
router.naviage("newUrl", {preserveQueryParams: true, preserveFragment: true})
<a routerLink="newUrl" preserveQueryParams preserveFragment></a>
This removes the magic from the `inject` test helper that would inspect
the current zone and would only work with our `async` test helper.
Now, `inject` is always synchronous, and if you are using a module
that requires async precompilation, you're required to call
`doAsyncPrecompilation` in your tests.
This is part of the breaking changes introduced with the swap
to each test having an AppModule.
Closes#9975Closes#9593
BREAKING CHANGE:
`TestInjector` is now renamed to `TestBed`
Before:
```js
import {TestInjector, getTestInjector} from '@angular/core/testing';
```
After:
```js
import {TestBed, getTestBed} from '@angular/core/testing';
```
Due to daa9da4047,
tests using the setBaseTestProviders stopped working with ambient directives such as
`ngIf`. Add them back in to keep the shim working.
This remove a breaking change introduced with commit #e7a8e2757b06d572f614f53b648d2fd75df370d2 where json objects passed to requests were not converted into string.
BREAKING CHANGE:
The behavior in this commit is the same as before PR 7260 : the objects sent with the request are converted to a string, therefore there is no need for the user to take care of the serialization.
Fixes#10073
The testing_e2e util does not belong in platform-browser and was never
intended to be a public API. Move it out of that whole tree.
BREAKING CHANGE:
The following API was never intended to be public and is removed:
```js
import {verifyNoBrowserErrors} from '@angular/platform-browser/testing_e2e';
```
Consider using Protractor's console plugin: https://github.com/angular/protractor-console-plugin
BREAKING CHANGES:
"{" is used a a delimiter for ICU messages then it could not be used in text nodes.
"{" should be escaped as "{{ '{' }}"
Before:
<span>some { valid } text</span>
After:
<span>some { invalid } text<span> <!-- throw parse error -->
<span>some {{ '{' }} valid } text</span>
This change reverts the removal of setBaseTestProviders that was
introduced in 8d746e3f67.
Instead, setBaseTestProviders and the providers provided from
`@angular/platform-browser-dynamic/testing` and `@angular/server/testing`
will still work for the next release, but are deprecated.
See 8d746e3f67 for how to upgrade.
BREAKING CHANGE (deprecations)
- Instead of `coreBootstrap`, create an `@AppModule` and use `bootstrapModule`.
- Instead of `coreLoadAndBootstarp`, create an `@AppModule` and use `bootstrapModuleFactory`.
- Instead of `bootstrapWorkerApp`, create an `@AppModule` that includes the `WorkerAppModule` and use `bootstrapModule` with the `workerAppPlatform()`.
- Instead of `bootstrapWorkerUi`, create an @AppModule that includes the `WorkerUiModule` and use `bootstrapModule` with the `workerUiPlatform()` instead.
- Instead of `serverBootstrap`, create an @AppModule and use `bootstrapModule` with the `serverDynamicPlatform()` instead.
- Instead of `PLATFORM_PIPES` and `PLATFORM_DIRECTIVES`, provide platform directives/pipes via an `@AppModule`.
- Instead of `ComponentResolver`:
- use `ComponentFactoryResolver` together with `@AppModule.precompile`/`@Component.precompile` or `ANALYZE_FOR_PRECOMPILE` provider for dynamic component creation.
- use `AppModuleFactoryLoader` for lazy loading.
- Instead of `SystemJsComponentResolver`, create an `@AppModule` and use `SystemJsAppModuleLoader`.
- Instead of `SystemJsCmpFactoryResolver`, create an `@AppModule` and use `SystemJsAppModuleFactoryLoader`
Closes#9726
- Introduces `CompilerFactory` which can be part of a `PlatformRef`.
- Introduces `WorkerAppModule`, `WorkerUiModule`, `ServerModule`
- Introduces `serverDynamicPlatform` for applications using runtime compilation
on the server.
- Changes browser bootstrap for runtime and offline compilation (see below for an example).
* introduces `bootstrapModule` and `bootstrapModuleFactory` in `@angular/core`
* introduces new `browserDynamicPlatform` in `@angular/platform-browser-dynamic
- Changes `initTestEnvironment` (which used to be `setBaseTestProviders`) to not take a compiler factory any more (see below for an example).
BREAKING CHANGE:
## Migration from `setBaseTestProviders` to `initTestEnvironment`:
- For the browser platform:
BEFORE:
```
import {setBaseTestProviders} from ‘@angular/core/testing’;
import {TEST_BROWSER_DYNAMIC_PLATFORM_PROVIDERS,
TEST_BROWSER_DYNAMIC_APPLICATION_PROVIDERS} from ‘@angular/platform-browser-dynamic/testing’;
setBaseTestProviders(TEST_BROWSER_DYNAMIC_PLATFORM_PROVIDERS,
TEST_BROWSER_DYNAMIC_APPLICATION_PROVIDERS);
```
AFTER:
```
import {initTestEnvironment} from ‘@angular/core/testing’;
import {browserDynamicTestPlatform,
BrowserDynamicTestModule} from ‘@angular/platform-browser-dynamic/testing’;
initTestEnvironment(
BrowserDynamicTestModule,
browserDynamicTestPlatform());
```
- For the server platform:
BEFORE:
```
import {setBaseTestProviders} from ‘@angular/core/testing’;
import {TEST_SERVER_PLATFORM_PROVIDERS,
TEST_SERVER_APPLICATION_PROVIDERS} from ‘@angular/platform-server/testing/server’;
setBaseTestProviders(TEST_SERVER_PLATFORM_PROVIDERS,
TEST_SERVER_APPLICATION_PROVIDERS);
```
AFTER:
```
import {initTestEnvironment} from ‘@angular/core/testing’;
import {serverTestPlatform,
ServerTestModule} from ‘@angular/platform-browser-dynamic/testing’;
initTestEnvironment(
ServerTestModule,
serverTestPlatform());
```
## Bootstrap changes
```
@AppModule({
modules: [BrowserModule],
precompile: [MainComponent],
providers: […], // additional providers
directives: […], // additional platform directives
pipes: […] // additional platform pipes
})
class MyModule {
constructor(appRef: ApplicationRef) {
appRef.bootstrap(MainComponent);
}
}
// offline compile
import {browserPlatform} from ‘@angular/platform-browser’;
import {bootstrapModuleFactory} from ‘@angular/core’;
bootstrapModuleFactory(MyModuleNgFactory, browserPlatform());
// runtime compile long form
import {browserDynamicPlatform} from ‘@angular/platform-browser-dynamic’;
import {bootstrapModule} from ‘@angular/core’;
bootstrapModule(MyModule, browserDynamicPlatform());
```
Closes#9922
Part of #9726
We still support this via a hack, but should remove this soon.
This also fixes tests for module directives / pipes
as they used directives / pipes that were
already present in the underlying platform.
Animation triggers can now be set via template bindings `[]`
BREAKING CHANGE:
animation trigger expressions within the template that are assigned as
an element attribute (e.g. `@prop`) are deprecated. Please use the
Angular2 property binding syntax (e.g. `[@prop]`) when assigning
properties.
```ts
// this is now deprecated
<div @trigger="expression"></div>
// do this instead
<div [@trigger]="expression"></div>
```
Introduces the new `ANALYZE_FOR_PRECOMPILE` token. This token can be used to
create a virtual provider that will populate the `precompile` fields of
components and app modules based on its
`useValue`. All components that are referenced in the `useValue`
value (either directly or in a nested array or map) will be added
to the `precompile` property.
closes#9874
related to #9726
Closes#9732
BREAKING CHANGE:
We have removed the deprecated form directives from the built-in platform directive list, so apps are not required to package forms with their app. This also makes forms friendly to offline compilation.
Instead, we have exposed three modules:
OLD API:
- `DeprecatedFormsModule`
NEW API:
- `FormsModule`
- `ReactiveFormsModule`
If you provide one of these modules, the default forms directives and providers from that module will be available to you app-wide. Note: You can provide both the `FormsModule` and the `ReactiveFormsModule` together if you like, but they are fully-functional separately.
**Before:**
```ts
import {disableDeprecatedForms, provideForms} from @angular/forms;
bootstrap(App, [
disableDeprecatedForms(),
provideForms()
]);
```
**After:**
```ts
import {DeprecatedFormsModule} from @angular/common;
bootstrap(App, {modules: [DeprecatedFormsModule] });
```
-OR-
```ts
import {FormsModule} from @angular/forms;
bootstrap(App, {modules: [FormsModule] });
```
-OR-
```ts
import {ReactiveFormsModule} from @angular/forms;
bootstrap(App, {modules: [ReactiveFormsModule] });
```
You can also choose not to provide any forms module and run your app without forms.
Or you can choose not to provide any forms module *and* provide form directives at will. This will allow you to use the deprecatedForms API for some components and not others.
```
import {FORM_DIRECTIVES, FORM_PROVIDERS} from @angular/forms;
@Component({
selector: some-comp,
directives: [FORM_DIRECTIVES],
providers: [FORM_PROVIDERS]
})
class SomeComp
```
Every test now has an implicit module. It can be configured via `configureModule` (from @angular/core/testing)
to add providers, directives, pipes, ...
The compiler now has to be configured separately via `configureCompiler` (from @angular/core/testing)
to add providers or define whether to use jit.
BREAKING CHANGE:
- Application providers can no longer inject compiler internals (i.e. everything
from `@angular/compiler). Inject `Compiler` instead. This reflects the
changes to `bootstrap` for module support (3f55aa609f).
- Compiler providers can no longer be added via `addProviders` / `withProviders`.
Use the new method `configureCompiler` instead.
- Platform directives / pipes need to be provided via
`configureModule` and can no longer be provided via the
`PLATFORM_PIPES` / `PLATFORM_DIRECTIVES` tokens.
- `setBaseTestProviders()` was renamed into `initTestEnvironment` and
now takes a `PlatformRef` and a factory for a
`Compiler`.
- E.g. for the browser platform:
BEFORE:
```
import {setBaseTestProviders} from ‘@angular/core/testing’;
import {TEST_BROWSER_DYNAMIC_PLATFORM_PROVIDERS,
TEST_BROWSER_DYNAMIC_APPLICATION_PROVIDERS} from ‘@angular/platform-browser-dynamic/testing’;
setBaseTestProviders(TEST_BROWSER_DYNAMIC_PLATFORM_PROVIDERS,
TEST_BROWSER_DYNAMIC_APPLICATION_PROVIDERS);
```
AFTER:
```
import {setBaseTestProviders} from ‘@angular/core/testing’;
import {browserTestCompiler, browserDynamicTestPlatform,
BrowserDynamicTestModule} from ‘@angular/platform-browser-dynamic/testing’;
initTestEnvironment(
browserTestCompiler,
browserDynamicTestPlatform(),
BrowserDynamicTestModule);
```
- E.g. for the server platform:
BEFORE:
```
import {setBaseTestProviders} from ‘@angular/core/testing’;
import {TEST_SERVER_PLATFORM_PROVIDERS,
TEST_SERVER_APPLICATION_PROVIDERS} from ‘@angular/platform-server/testing/server’;
setBaseTestProviders(TEST_SERVER_PLATFORM_PROVIDERS,
TEST_SERVER_APPLICATION_PROVIDERS);
```
AFTER:
```
import {setBaseTestProviders} from ‘@angular/core/testing’;
import {serverTestCompiler, serverTestPlatform,
ServerTestModule} from ‘@angular/platform-browser-dynamic/testing’;
initTestEnvironment(
serverTestCompiler,
serverTestPlatform(),
ServerTestModule);
```
Related to #9726Closes#9846
RelectorHost threw an exception when metadata was requested for a
.d.ts file that didn't have a .metadata.json file. Changed it to
return undefined.
Fixes#9678
Added error correction so the parser always returns an AST
Added span information to the expression parser
Refactored the test to account for the difference in error reporting
Added tests for error corretion
Modified tests to validate the span information
This introduces the `BrowserModule` to be used for long form
bootstrap and offline compile bootstrap:
```
@AppModule({
modules: [BrowserModule],
precompile: [MainComponent],
providers: […], // additional providers
directives: […], // additional platform directives
pipes: […] // additional platform pipes
})
class MyModule {
constructor(appRef: ApplicationRef) {
appRef.bootstrap(MainComponent);
}
}
// offline compile
import {bootstrapModuleFactory} from ‘@angular/platform-browser’;
bootstrapModuleFactory(MyModuleNgFactory);
// runtime compile long form
import {bootstrapModule} from ‘@angular/platform-browser-dynamic’;
bootstrapModule(MyModule);
```
The short form, `bootstrap(...)`, can now creates a module on the fly,
given `directives`, `pipes, `providers`, `precompile` and `modules`
properties.
Related changes:
- make `SanitizationService`, `SecurityContext` public in `@angular/core` so that the offline compiler can resolve the token
- move `AnimationDriver` to `platform-browser` and make it
public so that the offline compiler can resolve the token
BREAKING CHANGES:
- short form bootstrap does no longer allow
to inject compiler internals (i.e. everything
from `@angular/compiler). Inject `Compiler` instead.
To provide custom providers for the compiler,
create a custom compiler via `browserCompiler({providers: [...]})`
and pass that into the `bootstrap` method.
This implements a new class, QueryEncoder, that provides
methods for encoding keys and values of query parameter.
The encoder encodes with encodeURIComponent, and then
decodes a whitelist of allowed characters back to their
unencoded form.
BREAKING CHANGE:
The changes to Http's URLSearchParams serialization now
prevent encoding of these characters inside query parameters
which were previously converted to percent-encoded values:
@ : $ , ; + ; ? /
The default encoding behavior can be overridden by extending
QueryEncoder, as documented in the URLSearchParams service.
Fixes#9348
Adds new abstraction `Compiler` with methods
`compileComponentAsync` and `compileComponentSync`.
This is in preparation of deprecating `ComponentResolver`.
`compileComponentSync` is able to compile components
synchronously given all components either have an inline
template or they have been compiled before.
Also changes `TestComponentBuilder.createSync` to
take a `Type` and use the new `compileComponentSync` method.
Also supports overriding the component metadata even if
the component has already been compiled.
Also fixes#7084 in a better way.
BREAKING CHANGE:
`TestComponentBuilder.createSync` now takes a component type
and throws if not all templates are either inlined
are compiled before via `createAsync`.
Closes#9594
- ts-api-guardian will now error if a new public symbol is added with a stability marker (`@stable`, `@experimental`, `@deprecated`)
- DomEventsPlugin and KeyEventsPlugin were removed from public api surface - these classes is an implementation detail
- deprecated BROWSER_PROVIDERS was removed completely
- `@angular/compiler` was removed from the ts-api-guardian check since this package shouldn't contain anything that users need to directly import
- the rest of the api surface was conservatively marked as stable or experimental
BREAKING CHANGES: DomEventsPlugin and KeyEventsPlugin previously exported from core are no longer public - these classes are implementation detail.
Previously deprecated BROWSER_PROVIDERS was completely removed from platform-browser.
Closes#9236Closes#9235
Ref #9234
This fix prevented waiting for child components even if the cycle was only introduced via the `directives` array, i.e. without actually having a cycle. This easily causes issues for applications that have one shared list of directives for all components.
This reverts commit 3d5bb23184.
Closes#9647
Allow more elements and attributes from the HTML5 spec which were stripped by the htmlSanitizer.
fixes#9438
feat(security): allow audio data URLs in urlSanitizer
test(security) : add test for valid audio data URL
feat(security): allow and sanitize srcset attributes
test(security): test for srcset sanitization
Instead, the async function now determines whether it should return a promise
or instead call a done function parameter. Importing Jasmine functions
from `@angular/core/testing` is no longer necessary and is now deprecated.
Additionally, beforeEachProviders is also deprecated, as it is specific
to the testing framework. Instead, use the new addProviders method directly.
Before:
```js
import {beforeEachProviders, it, describe, inject} from 'angular2/testing/core';
describe('my code', () => {
beforeEachProviders(() => [MyService]);
it('does stuff', inject([MyService], (service) => {
// actual test
});
});
```
After:
```js
import {addProviders, inject} from 'angular2/testing/core';
describe('my code', () => {
beforeEach(() => {
addProviders([MyService]);
});
it('does stuff', inject([MyService], (service) => {
// actual test
});
});
```
TestComponentBuilder now lives in core/testing. compiler/testing contains a private
OverridingTestComponentBuilder implementation which handles the private behavior
we need to override templates. This is part of the effort to simplify the testing
imports and hide compiler APIs.
Closes#9585
BREAKING CHANGE:
`TestComponentBuilder` is now imported from `@angular/core/testing`. Imports
from `@angular/compiler/testing` are deprecated.
Before:
```
import {TestComponentBuilder, TestComponentRenderer, ComponentFixtureAutoDetect} from '@angular/compiler/testing';
```
After:
```
import {TestComponentBuilder, TestComponentRenderer, ComponentFixtureAutoDetect} from '@angular/core/testing';
```
BREAKING CHANGE:
MockLocationStrategy was intended to be internal only and is now removed
from the `@angular/common/testing` public api.
Use `SpyLocation` from `@angular/common/testing` for location testing.
BREAKING CHANGE:
`ComponentFixture` will be moving out of `@angular/compiler/testing` to `@angular/core/testing` in
this release. For now, it is deprecated from `@angular/compiler/testing`.
Previously, we were exporting internal mocks and helpers. Move these
to core/testing/testing_internal or remove them if they were
never used.
Remove deprecated items - injectAsync, clearPendingTimers.
BREAKING CHANGE:
Remove the following APIs from `@angular/core/testing`, which have been deprecated or were
never intended to be publicly exported:
```
injectAsync
clearPendingTimers
Log
MockAppliacationHref
MockNgZone
clearPendingTimers
getTypeOf
instantiateType
```
Instead of `injectAsync`, use `async(inject())`.
`clearPendingTimers` is no longer required.
Mostly, removing things that were never intended to be exported publicy.
BREAKING CHANGE:
The following are no longer publicly exported APIs. They were intended as internal
utilities and you should use your own util:
```
browserDetection,
dispatchEvent,
el,
normalizeCSS,
stringifyElement,
expect (and custom matchers for Jasmine)
```
The DOM schema does not allow binding any properties to dangerous SVG
attributes/properties. This change adds a smoke test to verify that
behaviour, by testing that `xlink:href` (a sample dangerous property)
is not bindable.
Fixes#9510.
E.g. in the following scenario,
`some-directive` should not be able to inject
any view provider that `my-comp-with-view-providers`
declares.
```
<my-comp-with-view-providers>
<div some-directive></div>
</my-comp-with-view-providers>
```
Update compiler-cli dependencies to include minimist and also increment tsc-wrapped to 0.2.0. There is signature mismatch between tsc-wrapped (v0.1.0) collector.js#getMetadata and compiler-cli reflector_host.js#getMetadataFor that caused an error anytime ngc was executed. The error received was as follows.
`TypeError: Cannot read property 'getSymbolsInScope' of undefined`
After forcing NPM to install @angular/tsc-wrapped@latest the error was resolved.
Fixes#9540
Fixes#7315
BREAKING CHANGES:
Previously multiple template bindings on one element
(ex. `<div *ngIf='..' *ngFor='...'>`) were allowed but most of the time
were leading to undesired result. It is possible that a small number
of applications will see template parse errors that shuld be fixed by
nesting elements or using `<template>` tags explicitly.
Closes#9462
Fix how the compiler checks for recursive components by also considering
component descendants. Previously, it only checked if the current
component was evaluated previously. This failed in certain cases of
mutually recursive components, causing `createAsync` in tests to not
resolve.
closes [7084](https://github.com/angular/angular/issues/7084)
the previous demo app was broken and is missing an e2e test.
I fixed the app, but was not able to get protractor to properly test
this app. Julie and I are looking into that. For now I manually verified
that the app works and that the original issue was fixed.
Closes#9244
BREAKING CHANGES:
`containsRegexp` is no more exported from `@angular/core/testing`. It should not have been part of the public API in the first place.
BREAKING CHANGE: Parse5Adapter is no longer exported as public API, use serverBootstrap()
Parse5Adapter is an implementation detail not a public API
Closes#9237Closes#9205
After splitting the facades into multiple modules,
enabling prod mode for code had no effect for the compiler.
Also in a change between RC1 and RC2 we created the `CompilerConfig`
via a provider with `useValue` and not via a `useFactory`, which reads
the prod mode too early.
Closes#9318Closes#8508Closes#9318
Also modified static reflector to allow writing tests in using
the .ts and using the MetadataCollector.
Also made MetadataCollector be able to use SourceFiles that have
not been bound (that is, don't have the parent property set).
Fixes#9182Fixes#9265
If a user ends up with a safe value in an interpolation context, that's probably
a bug. Returning `"SafeValue must use [property]= binding"` will make it easier
to detect and correct the situation. Detecting the situation and throwing an
error for it could cause performance issues, so we're not doing this at this
point (but might revisit later).
Part of #8511 and #9253.
This lets users continue using runtime-sideeffect Decorators if they choose,
only down-leveling the marked ones to Annotations.
Also remove the "skipTemplateCodegen" option, which is no longer needed
since Angular compiles with tsc-wrapped rather than ngc. The former doesn't
include any codegen.
"render" is gramatically incorrect and confusing to developers who used this api.
Since webworker apis were exposed only in master, renaming these before the rc2 release
is not a breaking change
`<ng-container>` is a logical container that can be used to group nodes but is not rendered in the DOM tree as a node.
`<ng-container>` is rendered as an HTML comment.
* feat(I18nExtractor): Add file paths to error messages
relates to #9071
* feat(i18n): allow i18n start comments without meaning
* refactor(i18n): cleanup
* test(HtmlParser): Add depth to expansion forms
Previously these symbols were exposed via platform-browser-dynamic, then we merged then into platform-browser
thinking that tools would know how to shake off the compiler and other dynamic bits not used with the offline
compilation flow. This turned out to be wrong as both webpack and rollup don't have good enough tree-shaking
capabilities to do this today. We think that in the future we'll be able to merge these two entry points into
one, but we need to give tooling some time before we can do it. In the meantime the reintroduction of the -dynamic
package point allows us to separate the compiler dependencies from the rest of the framework.
This change undoes the previous breaking change that removed the platform-browser-dynamic package.
The collector now collects the body of functions that return an
expression as a symbolic 'function'. The static reflector supports
expanding these functions statically to allow provider macros.
Also added support for the array spread operator in both the
collector and the static reflector.
This aligns the configuration of platform pipes / directives with offline compilation.
BREAKING CHANGE:
- `PLATFORM_PIPES` and `PLATFORM_DIRECTIVES` now are fields on `CompilerConfig`.
Instead of providing a binding to these tokens, provide a binding for `CompilerConfig` instead.
The web animations API now requires that all styles are converted to
camel case. Chrome has already made this breaking change and hyphenated
styles are not functional anymore.
Closes#9111Closes#9112
Fix a bug due to which setting a custom Content-Type header in the
Request led to multiple Content-Types being set on the sent
XMLHttpRequest: first the detected content type based on the request
body, followed by the custom set content type.
Fix#9130.
Refactored ReflectorHost to allow it to be tested.
Fixed an issue where the .d.ts was findable but it wasn't used by the project
(This happens when the .metadata.json file references a module that was not
needed, such as it doesn't declare any types, and the reference to it was
elided by TypeScript when writing the .d.ts file).
Added tests for ReflectorHost
* Revert "fix(d.ts): enable angular2 compilation with TS flag --strictNullChecks (#8902)"
This reverts commit 7e352a27f7.
* test: add typescript test for our typings
it is not needed there because it will get transitively installed by @angular/platform-browser
we only need to declare this dependency in tsconfig.json because tsconfig.json's
do not support transitive dependencies in this way.
* test: add tree-shaking test
currently this doesn't throw or break the build, first we need to resolve all
of the existing issues.
to run execute: ./tools/tree-shaking-test/test.sh
then inspect dist/tree-shaking/test/**/*.bundle.js
* fix(http): remove peerDep on @angular/common
it is not needed there because it will get transitively installed by @angular/platform-browser
we only need to declare this dependency in tsconfig.json because tsconfig.json's
do not support transitive dependencies in this way.
It is now possible to set a fallback state that will apply its
styling when the destination state is not detected.
```ts
state("*", style({ ... }))
```
Closes#9013
This is needed to have a true replacement of the previous
`DynamicComponentLoader.loadNextToLocation`, so that components
can be loaded into the view before change detection runs.
Closes#9040
StaticReflector provides more context on errors reported by the
collector.
The metadata collector now records the line and character of the node that
caused it to report the error.
Includes other minor fixes to error reporting and a wording change.
Fixes#8978Closes#9011
There is no need to expose this additional method inside of the Renderer
API. The functionality can be restored by looping and calling
`setElementStyle` instead.
Note that this change is changing code that was was introduced after
the last release therefore this fix is not a breaking change.
Closes#9000Closes#9009
The metadata collector was modified to look up references in the
import list instead of resolving the symbol using the TypeChecker
making the use of the TypeChecker vestigial. This change removes
all uses of the TypeChecker.
Modified the schema to be able to record global and local (non-module
specific references).
Added error messages to the schema and errors are recorded in
the metadata file allowing the static reflector to throw errors
if an unsupported construct is referenced by metadata.
Closes#8966Fixes#8893Fixes#8894
BREAKING CHANGE: Location#platformStrategy property was previously accidentaly exported as public
If any application requires access to the current location strategy, it should be accessed via DI instead
by injecting the LocationStrategy token.
The likelyhood of anyone actually depending on this property is very low.
Eliminate the following compiler error when using TS 1.9+ with strict null checking enabled:
node_modules/@angular/core/src/util/decorators.d.ts(9,5): error TS2411: Property 'extends' of type 'Type | undefined' is not assignable to string index type 'Type | Function | any[]'.
https://github.com/angular/angular/issues/8720
Automatically recognize XSRF protection cookies, and set a corresponding XSRF
header. Allows applications to configure the cookie names, or if needed,
completely override the XSRF request configuration by binding their own
XSRFHandler implementation.
Part of #8511.
This ensures we run in a clean directory, using our real distribution. It finds bugs like @internal
APIs needed to type-check in the offline compiler, as well as problems in package.json.
Also move tsc-wrapped under tools/@angular
This addresses several oversights in assigning security contexts to DOM schema
elements found by our security reviewers (thanks!).
This also adds some more precise unit tests for the interaction between
(Dom)ElementSchemaRegistry and the TemplateParser, and extracts the security
specific parts into dom_security_schema.ts.
Comparison of (potentially) dangerous property names is done case insensitive,
to avoid issues like formAction vs formaction.
Part of issue #8511.
* fix(compiler): throw an error if variable with the same name is already defined. Closes#6492
* fix(compiler): Clean up formatting for issue #6492
* fix(compiler): throw an error if reference with the same name is already defined.
Closes#6492
* fix(ngRouteShim): update anchors to function similar to angular 1.x when setting the target
* fix(ngRouteShim): update anchor target check to use indexOf instead of contains on array
Same as 2bf21e1747 but for new router.
This also fixes an issue where when application loads it clears forward history
because Router constructor calls navigateByUrl which was causing a push state to happen.
The code does not force the user to provider `RenderDebugInfo`. The
current implementation lists this as a mandatory parameter. Update
the parameter to be optional.
Fixes#8466Closes#8859
The current behavior is for ngDoCheck to supplement, not override, the default change detector. OnChanges will still be called when DoCheck is implemented (fixes#7307).
Clicks on router-link should not prevent browser default action when
any mouse button other than left mouse button or ctrl/meta key is pressed.
router-link href should use location strategy external url.
Closes#5908Closes#6806Closes#7749Closes#8806Closes#8821
This allows angular's build to depend on some extensions, but not on code generation, and breaks a cycle in the angular build
We now merge ts-metadata-collector into tsc-wrapped and stop publishing the former.
This symbol is no longer reexported at the top level, so it's safe to not mark it as internal.
This fixes the offline compilation which got broken by this symbol not being present in the d.ts
files when the compiler tries to do a deep import.
Closes#8819
<!-- xxxx ------->
The issue came from a lack of support for backtracking on string
matching.
The way it is done, if the "end pattern" for consumeRawText starts with
twice the same character, you end up having problem when your string
being parsed has 3 times this char
Example
End string: xxyz
string to parse: aaaaaaxxxyz
calling consumeRawText(false, 'x', attemptParseStr('xyz')) would fail
Closes#7119
Taken into account the withCredentials property within the request options:
- added corresponding property in the RequestOptions class
- added corresponding property in the Request class
- handle this property when merging options
- set the withCredentials property on the XHR object when specified
Added a test in the xhr_backend_spec.ts to check that the property is actually
set on the XHR object
Closes https://github.com/angular/http/issues/65Closes#7281Closes#7281
Implement the ability to provide objects as request body. The following use cases
are supported:
* raw objects: a JSON payload is created and the content type set to `application/json`
* text: the text is used as it is and no content type header is automatically added
* URLSearchParams: a form payload is created and the content type set to `application/x-www-form-urlencoded`
* FormData: the object is used as it is and no content type header is automatically added
* Blob: the object is used as it is and the content type set with the value of its `type` property if any
* ArrayBuffer: the object is used as it is and no content type header is automatically added
Closes https://github.com/angular/http/issues/69Closes#7310
The strategies for Promise and Observable based subscriptions
have (nearly) the same method signatures. They should implement
a common interface.
Closes#7573
By adding `regex_named_groups` to regex route configurations we can consistently map
regex matching groups to component parameters.
This should fix#7554.
Closes#7694
Make sure the same path is not added multiple times to the history.
It is replacing the state, instead of skipping it completely,
because the current path in the browser might not be normalized,
while the given one is normalized.
Closes#7829Closes#7897
allows for
```
bootstrap(App, [
...HTTP_PROVIDERS,
...ROUTER_PROVIDERS
])
.then(enableDebugTools)
```
without breaking the rule of always returning a value in a promise
If the $routerOnActivate hook returns a promise, the navigation
is commited, once the promise gets fullfilled but the view
is updated immediately.
This commit delays the view update so that both (view and url) are
updated at the same time.
Closes#7777
Currently downgraded ng2 elements fail inside a ui-router view because they are unable
to require an ng2 Injector via the require attribute of the DDO, because ui-router compiles
its templates before they are inserted in a ui-view. This adds a "fallback" behavior if
a parent injector cannot be found to go to the root ng2 Injector.
Delays NG1 Directive controller instatiation where possible and pre-link function always
to the ngOnInit() lifecycle hook. This way bindings are always available on $scope in both
the controller and the link function.
Allows sanitized URLs for CSS properties. These can be abused for information
leakage, but only if the CSS rules are already set up to allow for it. That is,
an attacker cannot cause information leakage without controlling the style rules
present, or a very particular setup.
Fixes#8514.
This is based on Angular 1's implementation, parsing an HTML document
into an inert DOM Document implementation, and then serializing only
specifically whitelisted elements.
It currently does not support SVG sanitization, all SVG elements are
rejected.
If available, the sanitizer uses the `<template>` HTML element as an
inert container.
Sanitization works client and server-side.
Reviewers: rjamet, tbosch , molnarg , koto
Differential Revision: https://reviews.angular.io/D108
When a view is destroyed, we destroy all
views in view containers and should not detach them. However, previously, we also detached them which lead to problems during the iteration loop.
Closes#8458Closes#8471
Introduced by 0c600cf6e3
the bundles have source mpas disabled for now because when we downlevel
the esm bundle to es5 tsc doesn't consider the original source map so
we end up with a source map pointing to the esm bundle instead which is
not useful.
Summary:
This adds basic security hooks to Angular 2.
* `SecurityContext` is a private API between core, compiler, and
platform-browser. `SecurityContext` communicates what context a value is used
in across template parser, compiler, and sanitization at runtime.
* `SanitizationService` is the bare bones interface to sanitize values for a
particular context.
* `SchemaElementRegistry.securityContext(tagName, attributeOrPropertyName)`
determines the security context for an attribute or property (it turns out
attributes and properties match for the purposes of sanitization).
Based on these hooks:
* `DomSchemaElementRegistry` decides what sanitization applies in a particular
context.
* `DomSanitizationService` implements `SanitizationService` and adds *Safe
Value*s, i.e. the ability to mark a value as safe and not requiring further
sanitization.
* `url_sanitizer` and `style_sanitizer` sanitize URLs and Styles, respectively
(surprise!).
`DomSanitizationService` is the default implementation bound for browser
applications, in the three contexts (browser rendering, web worker rendering,
server side rendering).
BREAKING CHANGES:
*** SECURITY WARNING ***
Angular 2 Release Candidates do not implement proper contextual escaping yet.
Make sure to correctly escape all values that go into the DOM.
*** SECURITY WARNING ***
Reviewers: IgorMinar
Differential Revision: https://reviews.angular.io/D103
Impure pipes need to live on the view
that used them and need a new instance for
each call site.
Impure pipes need to live on the component view, cached across all child views,
and need a new pure proxy for each for
each call site that lives on the view
of the call site.
Fixes#8408
This bug was introduced not long ago by 152a117d5c
Before, we would create all fields in the generated views
with visibility `private`. This does not work if an embedded
view references a directive / element in a parent view.
In Dart, this was no problem so far as it does not have
a `private` modifier.
Before, `useValue` in a provider did not work when doing
offline compile, as so far the `MetadataResolver` was only
used for jit mode. Now, `useValue` supports any kind of value
that the static reflector can return. E.g. primitives,
arrays, string maps, …
Closes#8366
Most of the bugs discovered so far in the offline compiler were related to the StaticReflector. As it was part of angular2 core, it was hard to update. Moving it into the compiler_cli allows to release more often until the compiler_cli gets more stable.
Note: Moving the unit test next to the sources is the simplest option for now in terms of build setup.
Note: This commit only does the move. The next commit updates the build to run it again.
This change adds providers for fake router dependecies.
This allows TestComponentBuilder to create components with RouterLink and RouterOutlet directives
without the test writer needing to override them.
BREAKING CHANGE:
- ViewRef.changeDetectorRef was removed as using ChangeDetectorRefs
for EmbeddedViewRefs does not make sense. Use ComponentRef.changeDetectorRef
or inject ChangeDetectorRef instead.
Fixes#8242
The previous code that had `try/catch` statements in methods could not be optimized by Chrome.
This change separates `AppView` (no `try/catch`) form `DebugAppView` (always `try/catch`). Our codegen will use `AppView` in production mode and `DebugAppView` in debug mode.
Closes#8338
BREAKING CHANGE:
- `DynamicComponentLoader` is deprecated. Use `ComponentResolver` and `ViewContainerRef` directly.
- `DebugNode.inject` is deprecated. use `DebugNode.injector.get` instead.
BREAKING CHANGE:
- Before, a `EmbeddedViewRef` used to have methods for
setting variables. Now, a user has to pass in a context
object that represents all variables when an `EmbeddedViewRef`
should be created.
- `ViewContainerRef.createEmbeddedViewRef` now takes
a context object as 2nd argument.
- `EmbeddedViewRef.setLocal` and `getLocal` have been removed.
Use `EmbeddedViewRef.context` to access the context.
- `DebugNode.locals` has been removed. Use the new methods `DebugElement.references`
to get the references that are present on this element,
or `DebugElement.context` to get the context of the `EmbeddedViewRef` or the component to which the element belongs.
Closes#8321
These worked in Dart because they were effectively exported even without the export keyword.
Without exporting these symbols, they are not produced in .metadata.json files, which leaves
dangling references from the Decorators that use them.
Instantiating the test component within an NgZone will let us track async tasks in event handlers and change detection.
We can also do auto change detection when triggering events through dispatchEvent and not have to do fixture.detectChange() manually in the test.
New API:
ComponentFixture.autoDetectChanges() - This puts the fixture in auto detect mode that automatically calls detectChanges when the microtask queue is empty (Similar to how change detection is triggered in an actual application).
ComponentFixture.isStable() - This returns a boolean whether the fixture is currently stable or has some async tasks that need to be completed.
ComponentFixture.whenStable() - This returns a promise that is resolved when the fixture is stable after all async tasks are complete.
Closes#8301
The filename contains the module name as resolved by users, so the top-level module name is uneeded.
Module names on references are replaced by capturing the import syntax from the module.
This allows readers of the metadata to do the module resolution themselves.
Fixes#8225Fixes#8082Closes#8256
Remove FunctionWithParamTokens.
All test wrappers async, fakeAsync and inject now return just a Function instead of FunctionWithParamTokens. This makes them directly consumable by the test framework. Also the test framework code does not have to handle a union of Function and FunctionWithParamTokens everywhere.
The Function returned by the above methods are considered asynchronous by the test framework if they return a Promise, synchronous otherwise.
Closes#8257
Introduces `ref-` to give a name to an element or a directive (also works for `<template>` elements), and `let-` to introduce an input variable for a `<template>` element.
BREAKING CHANGE:
- `#...` now always means `ref-`.
- `<template #abc>` now defines a reference to the TemplateRef, instead of an input variable used inside of the template.
- `#...` inside of a *ngIf, … directives is deprecated.
Use `let …` instead.
- `var-...` is deprecated. Replace with `let-...` for `<template>` elements and `ref-` for non `<template>` elements.
Closes#7158Closes#8264
When a component uses a list of directives, such as `ROUTER_DIRECTIVES`,
make `TestComponentBuilder#overrideDirective` work properly for members
of the list.
Closes#7397Closes#8217
Pure pipes as well as arrays and maps are
implemented via proxy functions. This is
faster than the previous implementation
and also generates less code.
BREAKING CHANGE:
- pipes now take a variable number of arguments, and not an array that contains all arguments.
Update the version of zone.js to @0.6.12 that contains the new FakeAsyncTestZoneSpec.
The new fakeAsync zone handles errors better and clearPendingTimers() is no longer required to be called after handling an error and is deprecated.
The fakeAsync test zone will now throw an error if an XHR is attemtped within the test since that cannot be controlled synchronously in the test(Need to be mocked out with a service implementation that doesn't involve XHRs).
This commit also allows fakeAsync to wrap inject to make it consistent with async test zone.
BREAKING CHANGE:
inject can no longer wrap fakeAsync while fakeAsync can wrap inject. So the order in existing tests with inject and fakeAsync has to be switched as follows:
Before:
```
inject([...], fakeAsync((...) => {...}))
```
After:
```
fakeAsync(inject([...], (...) => {...}))
```
Closes#8142
This changes Angular so that it can be used without reflection (assuming a codegen for injectors).
BREAKIKNG CHANGE:
- Drops `APP_COMPONENT` provider. Instead, inject
`ApplicationRef` and read its `componentTypes` property.
- long form bootstrap has changed into the following:
```
var platform = createPlatform(ReflectiveInjector.resolveAndCreate(BROWSER_PROVIDERS));
var appInjector =
ReflectiveInjector.resolveAndCreate([BROWSER_APP_PROVIDERS, appProviders], platform.injector);
coreLoadAndBootstrap(appInjector, MyApp);
```
BREAKING CHANGE:
- Injector was renamed into `ReflectiveInjector`,
as `Injector` is only an abstract class with one method on it
- `Injector.getOptional()` was changed into `Injector.get(token, notFoundValue)`
to make implementing injectors simpler
- `ViewContainerRef.createComponent` now takes an `Injector`
instead of `ResolvedProviders`. If a reflective injector
should be used, create one before calling this method.
(e.g. via `ReflectiveInjector.resolveAndCreate(…)`.
This adds the feature for `@ViewChild`/`@ViewChildren`/`@ContentChild`/`@ContentChildren` to define what to read from the queried element.
E.g. `@ViewChild(`someVar`, read: ViewContainerRef)` will locate the element with a variable `someVar` on it and return a `ViewContainerRef` for it.
Background: With this change, Angular knows exactly at which elements there will be `ViewConainerRef`s as the user has to ask explicitly of them. This simplifies codegen and will make converting Angular templates into server side templates simpler as well.
BREAKING CHANGE:
- `DynamicComponentLoader.loadIntoLocation` has been removed. Use `@ViewChild(‘myVar’, read: ViewContainerRef)` to get hold of a `ViewContainerRef` at an element with variable `myVar`.
- `DynamicComponentLoader.loadNextToLocation` now takes a `ViewContainerRef` instead of an `ElementRef`.
- `AppViewManager` is renamed into `ViewUtils` and is a mere private utility service.
Each compile template now exposes a `<CompName>NgFactory` variable
with an instance of a `ComponentFactory`.
Calling `ComponentFactory.create` returns a `ComponentRef` that can
be used directly.
BREAKING CHANGE:
- `Compiler` is renamed to `ComponentResolver`,
`Compiler.compileInHost` has been renamed to `ComponentResolver.resolveComponent`.
- `ComponentRef.dispose` is renamed to `ComponentRef.destroy`
- `ViewContainerRef.createHostView` is renamed to `ViewContainerRef.createComponent`
- `ComponentFixture_` has been removed, the class `ComponentFixture`
can now be created directly as it is no more using private APIs.
closes https://github.com/angular/angular/issues/4943
BREAKING CHANGE:
`Location` and other related providers have been moved out of `router` and into `platform/common`. `BrowserPlatformLocation` is not meant to be used directly however advanced configurations may use it via the following import change.
Before:
```
import {
PlatformLocation,
Location,
LocationStrategy,
HashLocationStrategy,
PathLocationStrategy,
APP_BASE_HREF}
from 'angular2/router';
import {BrowserPlatformLocation} from 'angular2/src/router/location/browser_platform_location';
```
After:
```
import {
PlatformLocation,
Location,
LocationStrategy,
HashLocationStrategy,
PathLocationStrategy,
APP_BASE_HREF}
from 'angular2/platform/common';
import {BrowserPlatformLocation} from 'angular2/src/platform/browser/location/browser_platform_location';
```
Closes#7962
Instead of using injectAsync and returning a promise, use the `async` function
to wrap tests. This will run the test inside a zone which does not complete
the test until all asynchronous tasks have been completed.
`async` may be used with the `inject` function, or separately.
BREAKING CHANGE:
`injectAsync` is now deprecated. Instead, use the `async` function
to wrap any asynchronous tests.
Before:
```
it('should wait for returned promises', injectAsync([FancyService], (service) => {
return service.getAsyncValue().then((value) => { expect(value).toEqual('async value'); });
}));
it('should wait for returned promises', injectAsync([], () => {
return somePromise.then(() => { expect(true).toEqual(true); });
}));
```
After:
```
it('should wait for returned promises', async(inject([FancyService], (service) => {
service.getAsyncValue().then((value) => { expect(value).toEqual('async value'); });
})));
// Note that if there is no injection, we no longer need `inject` OR `injectAsync`.
it('should wait for returned promises', async(() => {
somePromise.then() => { expect(true).toEqual(true); });
}));
```
Closes#7735
BREAKING CHANGE:
- Renderer:
* renderComponent method is removed form `Renderer`, only present on `RootRenderer`
* Renderer.setDebugInfo is removed. Renderer.createElement / createText / createTemplateAnchor
now take the DebugInfo directly.
- Query semantics:
* Queries don't work with dynamically loaded components.
* e.g. for router-outlet: loaded components can't be queries via @ViewQuery,
but router-outlet emits an event `activate` now that emits the activated component
- Exception classes and the context inside changed (renamed fields)
- DebugElement.attributes is an Object and not a Map in JS any more
- ChangeDetectorGenConfig was renamed into CompilerConfig
- AppViewManager.createEmbeddedViewInContainer / AppViewManager.createHostViewInContainer
are removed, use the methods in ViewContainerRef instead
- Change detection order changed:
* 1. dirty check component inputs
* 2. dirty check content children
* 3. update render nodes
Closes#6301Closes#6567
Reflector always returns either an empty object or an empty list if no
metadata is recorded for the class. StaticReflector matches this
behavior.
Closes#7986
using "/// <reference" is incorrect because it makes our code non-portable. The correct solution is to provide
these typings as ambient typings as an additional entry point - which we already do.
Closes#8050
In Dart, ImmutableLists are just a projection of an underlying list.
I.e. if the underlying list changes, the ImmutableList also changes.
So we can't make optimizations based on checking whether a collection
is an ImmutableList.
This reverts commit a10c02cb41.
Closes#8023
Useful for avoiding doing an actual XHR during testing.
Part of the solution for #4051 (Other part is a Karma plugin that will create the template cache).
Closes#7940
Added a static reflector that uses metadta produced during build
or, additionally, directly from typescript, to produce the metadata
used by Angular code generation compiler.
Add a check in ReflectionCapabilities#interfaces which determines if
the passed-in type implements a Lifecycle Interface but does not declare
that it does so.
See https://goo.gl/b07Kii for details.
Closes#6849
fixes#6303
BREAKING CHANGE:
For static content projection, elements with *-directives are now matched against the element itself vs the template before.
<p *ngIf="condition" foo></p>
Before:
// Use the implicit template for projection
<ng-content select="template"></ng-content>
After:
// Use the actual element for projection
<ng-content select="p[foo]"></ng-content>
Closes#7742
Before, you'd get an error like:
```
EXCEPTION: Cannot find a differ supporting object ‘[object Object]’ in [users in UsersCmp@2:14]
```
Now, you get:
```
EXCEPTION: Cannot find a differ supporting object ‘[object Object]’ of type 'Object'. Did you mean to bind ngFor to an Array? in [users in UsersCmp@2:14]
```
At the moment ng-link is generating html5mode URLs for `href`s.
Instead it should check whether or not html5mode is enabled and create
the `href`s accordingly. The renaming in the `getLink` function is
aligning it to `RouterLink`'s `_updateLink`.
Closes#7423
Update the Angular 2 transformer to recognize
`package:angular2/platform/browser.dart` as the library which exports
the `bootstrap` function.
Update playground, examples, benchmarks, & tests to import bootstrap from
platform/browser.
Closes#7647
Change the old public api spec to check only the exported top-level symbols. This will make sure that Dart and JS do not diverge. The new public api spec verifies the TS api.
Closes#7447
TL;DR: Modify pubspec.yaml files to use the recommended "targeted"
transformers. The unified "simple" angular2 transformer still works as
always, but we want to encourage use of the targeted transformers
whereever possible.
See [the wiki](https://github.com/angular/angular/wiki/Advanced-Transformer-Configuration)
for details about targeted transformers.
See #1872
Until Angular 1.5.1 is released, the `$routeConfig` and `$routerCanActivate`
annotations for components must live on the controller constructor.
In Angular 1.5.1, it will automatically copy these annotations across from
the component definition file.
Closes#7319
These tests were registering new components after the application had
been bootstrapped, which is not a valid use case for synchronous routes
in Angular 1.
In particular it was registering the "root" component, which caused the
`$rootRouter` to blow up, when it was instantiated, pointing to a root
component that did not yet exist.
The directiveIntrospector was a bit of a hack to allow the router to
read the `$routeConfig` annocation and `$routerCanActivate` hook from
directives when they were registered.
It turns out that if we put these properties on the component controller's
constructor function (i.e. as static class methods) then we can simply
use the `$injector` to access it as required.
Currently, people put the properties directly on their component definition
objects. In Angular 1.5.1, we will copy these properties onto the controller
constructor to maintain a simple migration path. But going forward it may be
better to encourage people to add the properties directly to the controller
constructor.
Create transformers that allow specifying transformer actions on
specific libraries.
* angular2/transform/codegen: Generates all necessary code.
* angular2/transform/reflection_rewriter: Replaces `bootstrap` calls in
application entry points to remove transitive dart:mirrors import,
resulting in smaller code size & faster execution.
* angular2/transform/deferred_rewriter: Rewrites deferred imports and
`loadLibrary` calls to initialize Angular2 and preserve deferred
operation.
Proper configuration of these three transformers can replace the single
angular2 transformer, resulting in significant performance gains for
builds of large angular2 apps.
Update angular2 itself to declare the codegen transformer, since it has
neither deferred imports nor application entry points.
Remove the undocumented & unused quick_transformer.
Instead of running with karma and the karma-dart shim, run dart
tests directly using the new package:test runner. This migrates
away from package:unittest.
Fixes a couple tests, mostly associated with depending on absolute
URLs or editing the test providers after an injector had already
been created.
Remove karma-dart and associated files. Change gupfiles to run tests
via `pub run test` instead.
Alex Eagle
Kara
Victor Savkin
Brandon
Julie Ralph
Miško Hevery
Alex Rickabaugh
Marcus Krahl
John-David Dalton
Chuck Jazdzewski
Jason Choi
Craig
Martin Probst
Hans
vsavkin
Matias Niemelä
Josh Thomas
Suguru Inatomi
Trotyl Yu
Igor Minar
Victor Berchet
Igor Minar
mgiambalvo
Rob Wormald
Zhicheng Wang
Andrei Tserakhau
Marc Laval
PatrickJS
Daniel Leib
vikerman
Jesús Rodríguez
Damien Cassan
Pawel Kozlowski
Jason Choi
Patrice Chalin
Alex Eagle
Patrice Chalin
Tobias Bosch
Michael
Sam Herrmann
Cody-Nicholson
Zhicheng Wang
Gabe Johnson
Sammy Jelin
Josh Gerdes
Cole R Lawrence
Hiroto Fukui
nickraphael
choeller
Codebacca
Damien Cassan
Vikram Subramanian
LongYinan
Roberto Simonetti
Georgii Dolzhykov
ipinak
Naomi Black
Jeff Cross
Cyrille Tuzi
Gion Kunz
Marek Buko
Kara Erickson
Wojciech Kwiatek
ScottSWu
Torgeir Helgevold
Dmitry Zamula
tycho01
Dimitrios Loukadakis
Mike Ryan
James Ward
Edd Hannay
Andrei Tserakhau
Alfonso Presa
Olivier Chafik
Wassim Chegham
Shlomi Assaf
Vivek Ghaisas
Idir Ouhab Meskine
ScottSWu
Sekib Omazic
Hannah Howard
laco0416
opensrcken
Tom
Phong Huynh
Andrii Nechytailov
Jon
Dimitrios Loukadakis
Nicholas Hydock
Matthew Windwer
Anton Moiseev
Thierry Templier
Matt Wheatley
Zach Bjornson
Ajay Ambre
Jonathan Miles
Ivan Gabriele
Vanga Sasidhar
Wesley Cho
Jay Phelps
Utsav Shah
Gabe Scholz
Borys Semerenko
Grégory Bataille
cexbrayat
Wassim Chegham
Dmytro Kulyk
Andreas Wissel
Kevin-K
Brendan Wyse
Vamsi V
Tom Schoener
Tero Parviainen
Ward Bell
Pete Boere
Peter Bacon Darwin
Sebastian Hillig
Justin DuJardin
cjc343
kurt
Pete Mertz
Rene Weber
Pascal Precht
mgechev
Andrew
alexcastillo
Elliott Davis
Drew Moore
Jake Garelick
Yang Lin
David Reher
agpreynolds
Fabian Raetz
Aliaksei Palkanau
BeastCode
William Welling
Kai Ruhnau
Joost de Vries
Felix Itzenplitz
Nathan Walker
simon-ramsay
Eric Jimenez
Felix Yan
Andrei Alecu
kutyel
Robert Messerle
Jason Teplitz
Cuel
Brian Ford
Tim Ruffles
Federico Caselli
Tim Blasi
Vijay Menon
Kathy Walrath
Kevin Merckx
Alexander Bachmann
Jason Kurian
David Reher
Jeremy Elbourn
Shuhei Kagawa
Jay Kan
asukaleido