In commit 7b55ba58b (part of PR #29092), the implementation of
`makeEntryPointBundle()` was changed such that it now always return
`EntryPointBundle` (and not `null`).
However, the return type was not updated and as result we continued to
unnecessarily handle `null` as a potential return value in some places.
This commit fixes the return type to reflect the implementation and
removes the redundant code that was dealing with `null`.
PR Close#32052
ngcc analyzes the dependency structure of the entrypoints it needs to
process, as the compilation of entrypoints is ordering sensitive: any
dependent upon entrypoint must be compiled before its dependees. As part
of the analysis of the dependency graph, it is detected when a
dependency of entrypoint is not installed, in which case that entrypoint
will be marked as ignored.
For libraries that work with Angular Universal to run in NodeJS, imports
into builtin NodeJS modules can be present. ngcc's dependency analyzer
can only resolve imports within the TypeScript compilation, which
builtin modules are not part of. Therefore, such imports would
erroneously cause the entrypoint to become ignored.
This commit fixes the problem by taking the NodeJS builtins into account
when dealing with missing imports.
Fixes#31522
PR Close#31872
ngcc analyzes the dependency structure of the entrypoints it needs to
process, as the compilation of entrypoints is ordering sensitive: any
dependent upon entrypoint must be compiled before its dependees. As part
of the analysis of the dependency graph, it is detected when a
dependency of entrypoint is not installed, in which case that entrypoint
will be marked as ignored.
When a target entrypoint to compile is provided, it could occur that
given target is considered ignored because one of its dependencies might
be missing. This situation was not dealt with currently, instead
resulting in a crash of ngcc.
This commit prevents the crash by taking the above scenario into account.
PR Close#31872
Previously, `ngcc` would avoid processing a `formatPath` that a property
in `package.json` mapped to, if either the _property_ was marked as
processed or the `formatPath` (i.e. the file(s)) was processed in the
same `ngcc` run (since the `compiledFormats` set was not persisted
across runs).
This could lead in a situation where a `formatPath` would be compiled
twice (if for example properties `a` and `b` both mapped to the same
`formatPath` and one would run `ngcc` for property `a` and then `b`).
This commit fixes it by ensuring that as soon as a `formatPath` has been
processed all corresponding properties are marked as processed (which
persists across `ngcc` runs).
PR Close#32003
Previously, when `ngcc` was called with `compileAllFormats === false`
(i.e. how `@angular/cli` calls it), it would not attempt to process
more properties, once the first was successfully processed. However, it
_would_ continue looping over them and perform some unnecessary
operations, such as:
- Determining the format each property maps to (which can be an
expensive operation for some properties mapping to either UMD or
CommonJS).
- Checking whether each property has been processed (which involves
checking whether any property has been processed with a different
version of `ngcc` each time).
- Potentially marking properties as processed (which involves a
file-write operation).
This commit avoids the unnecessary operations by entirely skipping
subsequent properties, once the first one has been successfully
processed. While this theoretically improves performance, it is not
expected to have any noticeable impact in practice, since the list of
`propertiesToConsider` is typically small and the most expensive
operation (marking a property as processed) has low likelihood of
happening (plus these operations are a tiny fraction of `ngcc`'s work).
PR Close#32003
Previously, when `ngcc` needed to mark multiple properties as processed
(e.g. a processed format property and `typings` or all supported
properties for a non-Angular entry-point), it would update each one
separately and write the file to disk multiple times.
This commit changes this, so that multiple properties can be updated at
once with one file-write operation. While this theoretically improves
performance (reducing the I/O operations), it is not expected to have
any noticeable impact in practice, since these operations are a tiny
fraction of `ngcc`'s work.
This change will be useful for a subsequent change to mark all
properties that map to the same `formatPath` as processed, once it is
processed the first time.
PR Close#32003
This commit changes the emit order of ngcc when a class has multiple static
fields being assigned. Previously, ngcc would emit each static field
followed immediately by any extra statements specified for that field. This
causes issues with downstream tooling such as build optimizer, which expects
all of the static fields for a class to be grouped together. ngtsc already
groups static fields and additional statements. This commit changes ngcc's
ordering to match.
PR Close#31933
If a project being built with ngtsc has no templates to check, then ngtsc
previously generated an empty typecheck file. This seems to trigger some
pathological behavior in TS where the entire user program is re-checked,
which is extremely expensive. This likely has to do with the fact that the
empty file is not considered an ES module, meaning the module structure of
the program has changed.
This commit causes an export to be produced in the typecheck file regardless
of its other contents, which guarantees that it will be an ES module. The
pathological behavior is avoided and template type-checking is fast once
again.
PR Close#31922
Describe the indexer module for Angular compiler developers. Include
scope of analysis provided by the module and the indexers it targets as
first-party.
PR Close#31260
In #31426 a fix was implemented to render namespaced decorator imports
correctly, however it turns out that the fix only worked when decorator
information was extracted from static properties, not when using
`__decorate` calls.
This commit fixes the issue by creating the decorator metadata with the
full decorator expression, instead of only its name.
Closes#31394
PR Close#31614
An identifier may become repeated when bundling multiple source files
into a single bundle, so bundlers have a strategy of suffixing non-unique
identifiers with a suffix like $2. Since ngcc operates on such bundles,
it needs to process potentially suffixed identifiers in their canonical
form without the suffix. The "ngx-pagination" package was previously not
compiled fully, as most decorators were not recognized.
This commit ensures that identifiers are first canonicalized by removing
the suffix, such that they are properly recognized and processed by ngcc.
Fixes#31540
PR Close#31614
Any decorator information present in TypeScript is emitted into the
generated JavaScript sources by means of `__decorate` call. This call
contains both the decorators as they existed in the original source
code, together with calls to `tslib` helpers that convey additional
information on e.g. type information and parameter decorators. These
different kinds of decorator calls were not previously distinguished on
their own, but instead all treated as `Decorator` by themselves. The
"decorators" that were actually `tslib` helper calls were conveniently
filtered out because they were not imported from `@angular/core`, a
characteristic that ngcc uses to drop certain decorators.
Note that this posed an inconsistency in ngcc when it processes
`@angular/core`'s UMD bundle, as the `tslib` helper functions have been
inlined in said bundle. Because of the inlining, the `tslib` helpers
appear to be from `@angular/core`, so ngcc would fail to drop those
apparent "decorators". This inconsistency does not currently cause any
issues, as ngtsc is specifically looking for decorators based on their
name and any remaining decorators are simply ignored.
This commit rewrites the decorator analysis of a class to occur all in a
single phase, instead of all throughout the `ReflectionHost`. This
allows to categorize the various decorate calls in a single sweep,
instead of constantly needing to filter out undesired decorate calls on
the go. As an added benefit, the computed decorator information is now
cached per class, such that subsequent reflection queries that need
decorator information can reuse the cached info.
PR Close#31614
nodejs rules 0.34.0 now includes protractor_web_test_suite rule (via new @bazel/protractor rule) so we switch to that location for that rule in this PR so that /packages/bazel/src/protractor can be removed in a future PR
this PR also brings in node toolchain support which was released in nodejs rules 0.33.0. this is a prerequisite for RBE for mac & windows users
bazel schematics also updated with the same. @bazel/bazel 0.28.1 npm package includes transitive dep on hide-bazel-files so we're able to remove an explicit dep on that as well.
PR Close#31824
In #30181, several testcases were added that were failing in Windows.
The reason was that a recent rebase missed a required change to interact
with the compiler's virtualized filesystems. This commit introduces the
required usage of the VFS layer to fix the testcase.
PR Close#31860
`TemplateVisitor#visitBoundAttribute` currently has to invoke visiting
expressions manually (this is fixed in #31813). Previously, it did not
bind `targetToIdentifier` to the visitor before deferring to the
expression visitor, which breaks the `targetToIdentifier` code. This
fixes that and adds a test to ensure the closure processed correctly.
This change is urgent; without it, many indexing targets in g3 are
broken.
PR Close#31861
Template AST nodes for (bound) attributes, variables and references will
now retain a reference to the source span of their value, which allows
for more accurate type check diagnostics.
PR Close#30181
The type check blocks (TCB) that ngtsc generates for achieving type
checking of Angular templates needs to be annotated with positional
information in order to translate TypeScript's diagnostics for the TCB
code back to the location in the user's template. This commit augments
the TCB by attaching trailing comments with AST nodes, such that a node
can be traced back to its source location.
PR Close#30181
Adds support for indexing template referenecs, variables, and property
and method calls inside bound attributes and bound events. This is
mostly an extension of the existing indexing infrastructure.
PR Close#31535
Currently we always generate the `read` parameter for the view and content query instructions, however since most of the time the `read` parameter won't be set, we'll end up generating `null` which adds 5 bytes for each query when minified. These changes make it so that the `read` parameter only gets generated if it has a value.
PR Close#31667
Extend indexing API interface to provide information about used
directives' selectors on template elements. This enables an indexer to
xref element attributes to the directives that match them.
The current way this matching is done is by mapping selectors to indexed
directives. However, this fails in cases where the directive is not
indexed by the indexer API, like for transitive dependencies. This
solution is much more general.
PR Close#31782
When analyzing components, directives, etc we capture its base class.
Previously this assumed that the code is in TS format, which is not
always the case (e.g. ngcc).
Now this code is replaced with a call to
`ReflectionHost.getBaseClassExpression()`, which abstracts the work
of finding the base class.
PR Close#31544
Previously the last file-system being tested was left as the current
file-system. Now it is reset to an `InvalidFileSystem` to ensure future
tests are not affected.
PR Close#31544
When injecting a `ChangeDetectorRef` into a pipe, the expected result is that the ref will be tied to the component in which the pipe is being used. This works for most cases, however when a pipe is used inside a property binding of a component (see test case as an example), the current `TNode` is pointing to component's host so we end up injecting the inner component's view. These changes fix the issue by only looking up the component view of the `TNode` if the `TNode` is a parent.
This PR resolves FW-1419.
PR Close#31438
We currently have a handwritten version of the Ivy directive def for NgClass so
we can switch between Ivy and View Engine behavior. This generated code needs to
be kept up-to-date with what the Ivy compiler generates.
PR 30742 recently changed `classMap` such that it now requires allocation of
host binding slots. This means that the `allocHostVars()` function must be
called in the NgClass directive def to match compiler output, but the
handwritten directive def was not updated. This caused a bug where NgClass
was inappropriately overwriting data for other directives because space was
not allocated for its values.
PR Close#31788
Currently, template expressions and statements have their location
recorded relative to the HTML element they are in, with no handle to
absolute location in a source file except for a line/column location.
However, the line/column location is also not entirely accurate, as it
points an entire semantic expression, and not necessarily the start of
an expression recorded by the expression parser.
To support record of the source code expressions originate from, add a
new `sourceSpan` field to `ASTWithSource` that records the absolute byte
offset of an expression within a source code.
Implement part 2 of [refactoring template parsing for
stability](https://hackmd.io/@X3ECPVy-RCuVfba-pnvIpw/BkDUxaW84/%2FMA1oxh6jRXqSmZBcLfYdyw?type=book).
PR Close#31391
This commit is the final patch of the ivy styling algorithm refactor.
This patch swaps functionality from the old styling mechanism to the
new refactored code by changing the instruction code the compiler
generates and by pointing the runtime instruction code to the new
styling algorithm.
PR Close#30742
Versions of CLI prior to angular/angular-cli@0e339ee did not expose the host.getModifiedResourceFiles() method.
This meant that null was being passed through to the IncrementalState.reconcile() method
to indicate that there were either no changes or the host didn't support that method.
This commit fixes a bug where we were checking for undefined rather than null when
deciding whether any resource files had changed, causing a null reference error to be thrown.
This bug was not caught by the unit testing because the tests set up the changed files
via a slightly different process, not having access to the CompilerHost, and these test
were making the erroneous assumption that undefined indicated that there were no
changed files.
PR Close#31322
Fixes all TypeScript failures caused by enabling the `--strict`
flag for test source files. We also want to enable the strict
options for tests as the strictness enforcement improves the
overall codehealth, unveiled common issues and additionally it
allows us to enable `strict` in the `tsconfig.json` that is picked
up by IDE's.
PR Close#30993
Previously, the usage of `null` and `undefined` keywords in code that is
statically interpreted by ngtsc resulted in a `DynamicValue`, as they were
not recognized as special entities. This commit adds support to interpret
these keywords.
PR Close#31150
The support for decorators that were imported via a namespace,
e.g. `import * as core from `@angular/core` was implemented
piecemeal. This meant that it was easy to miss situations where
a decorator identifier needed to be handled as a namepsaced
import rather than a direct import.
One such issue was that UMD processing of decorators was not
correct: the namespace was being omitted from references to
decorators.
Now the types have been modified to make it clear that a
`Decorator.identifier` could hold a namespaced identifier,
and the corresponding code that uses these types has been
fixed.
Fixes#31394
PR Close#31426
Fixes Ivy matching directives against attribute bindings (e.g. `[attr.some-directive]="foo"`). Works by excluding attribute bindings from the attributes array during compilation. This has the added benefit of generating less code.
**Note:** My initial approach to implementing this was to have a different marker for attribute bindings so that they can be ignored when matching directives, however as I was implementing it I realized that the attributes in that array were only used for directive matching (as far as I could tell). I decided to drop the attribute bindings completely, because it results in less generated code.
PR Close#31541
Currently we reuse the same instruction both for regular property bindings and property bindings on the `host`. The only difference between the two is that when it's on the host we shouldn't support inputs. We have an optional parameter called `nativeOnly` which is used to differentiate the two, however since `nativeOnly` is preceeded by another optional parameter (`sanitizer`), we have to generate two extra parameters for each host property bindings every time (e.g. `property('someProp', 'someValue', null, true)`).
These changes add a new instruction called `hostProperty` which avoids the need for the two parameters by removing `nativeOnly` which is always set and it allows us to omit `sanitizer` when it isn't being used.
These changes also remove the `nativeOnly` parameter from the `updateSyntheticHostBinding` instruction, because it's only generated for host elements which means that we can assume that its value will always be `true`.
PR Close#31550
Add support for indexing elements in the indexing module.
Opening and self-closing HTML tags have their selector indexed, as well
as the attributes on the element and the directives applied to an
element.
PR Close#31240
There are two places in the ngcc processing where it needs to load the
content of a file given by a general path:
* when determining the format of an entry-point.
To do this ngcc uses the value of the relevant property in package.json.
But in the case of `main` it must parse the contents of the entry-point
file to decide whether the format is UMD or CommonJS.
* when parsing the source files for dependencies to determine the order in
which compilation must occur. The relative imports in each file are parsed
and followed recursively, looking for external imports.
Previously, we naively assumed that the path would match the file name exactly.
But actually we must consider the standard module resolution conventions.
E.g. the extension (.js) may be missing, or the path may refer to a directory
containing an index.js file.
This commit fixes both places.
This commit now requires the `DependencyHost` instances to check
the existence of more files than before (at worst all the different possible
post-fixes). This should not create a significant performance reduction for
ngcc. Since the results of the checks will be cached, and similar work is
done inside the TS compiler, so what we lose in doing it here, is saved later
in the processing. The main performance loss would be where there are lots
of files that need to be parsed for dependencies that do not end up being
processed by TS. But compared to the main ngcc processing this dependency
parsing is a small proportion of the work done and so should not impact
much on the overall performance of ngcc.
// FW-1444
PR Close#31509
Prior to this fix, the logic to set the right placeholder format for ICUs was a bit incorrect: if there was a nested ICU in one of the root ICU cases, that led to a problem where placeholders in subsequent branches used the wrong ({$placeholder}) format instead of {PLACEHOLDER} one. This commit updates the logic to make sure we properly transform all placeholders even if nested ICUs are present.
PR Close#31516
Since, 7186f9c01 `compiler-cli` is no longer depending on `shelljs` for
production code. (We still use it in tests and infrastructure/tooling.)
Incidentally, this should also help with #29460.
PR Close#31468
Previously, resource paths beginning with '/' (aka "rooted" paths, which
are not actually absolute filesystem paths, but are relative to the
TypeScript project root directory) were not handled correctly. The leading
'/' was stripped and the path was resolved as if it was relative, but with
no containing file for context. This led to resources in different rootDirs
not being found.
Instead, such rooted paths are now resolved without TypeScript's help, by
checking each root directory. A test is added to this effect.
PR Close#31511
When determining if a `main` path points to a UMD or CommonJS
format, the contents of the file need to be loaded and parsed.
Previously, it was assumed that the path referred to the exact filename,
but did not account for normal module resolution semantics, where the
path may be missing an extension or refer to a directory containing an
`index.js` file.
// FW-1444
PR Close#31509
Since `goog.getMsg` does not process ICUs (post-processing is required via goog.i18n.MessageFormat, https://google.github.io/closure-library/api/goog.i18n.MessageFormat.html) and placeholder format used for ICUs and regular messages inside `goog.getMsg` are different, the current implementation (that assumed the same placeholder format) needs to be updated. This commit updates placeholder format used inside ICUs from `{$placeholder}` to `{PLACEHOLDER}` to better align with Closure. ICU placeholders (that were left as is prior to this commit) are now replaced with actual values in post-processing step (inside `i18nPostprocess`).
PR Close#31459
This commit adds a test that verifies no translations are generated for bound attributes and also checks (as a part of the `verify` function) that VE and Ivy handle this case the same way.
PR Close#31481
Adds a new `elementContainer` instruction that can be used to avoid two instruction (`elementContainerStart` and `elementContainerEnd`) for `ng-container` that has text-only content. This is particularly useful when we have `ng-container` inside i18n sections.
This PR resolves FW-1105.
PR Close#31444
Paths can be mapped directly to files, which was not being taken
into account when computing `basePaths` for the `EntryPointFinder`s.
Now if a `pathMapping` pattern does not exist or is a file, then we try
the containing folder instead.
Fixes#31424
PR Close#30525
Previously, ngcc had to walk the entire `node_modules` tree looking for
entry-points, even if it only needed to process a single target entry-point
and its dependencies.
This added up to a few seconds to each execution of ngcc, which is noticeable
when being run via the CLI integration.
Now, if an entry-point target is provided, only that target and its entry-points
are considered rather than the whole folder tree.
PR Close#30525
When profiling ngcc it is notable that a large amount of time
is spent dealing with an exception that is thrown (and handled
internally by fs) when checking the existence of a file.
We check file existence a lot in both finding entry-points
and when TS is compiling code. This commit adds a simple
cached `FileSystem`, which wraps a real `FileSystem` delegate.
This will reduce the number of calls through to `fs.exists()` and
`fs.readFile()` on the delegate.
Initial benchmarks indicate that the cache is miss to hit ratio
for `exists()` is about 2:1, which means that we save about 1/3
of the calls to `fs.existsSync()`.
Note that this implements a "non-expiring" cache, so it is not suitable
for a long lived `FileSystem`, where files may be modified externally.
The cache will be updated if a file is changed or moved via
calls to `FileSystem` methods but it will not be aware of changes
to the files system from outside the `FileSystem` service.
For ngcc we must create a new `FileSystem` service
for each run of `mainNgcc` and ensure that all file operations
(including TS compilation) use the `FileSystem` service.
This ensures that it is very unlikely that a file will change
externally during `mainNgcc` processing.
PR Close#30525
This message gets called if a format has already been
compiled and we only want the first. So the message itself
is wrong but it is also not very useful anyway.
PR Close#30525
The ngcc tool adds namespaced imports to files when compiling. The ngtsc
tooling was not processing types correctly when they were imported via
such namespaces. For example:
```
export declare class SomeModule {
static withOptions(...): ModuleWithProviders<ɵngcc1.BaseModule>;
```
In this case the `BaseModule` was being incorrectly attributed to coming
from the current module rather than the imported module, represented by
`ɵngcc1`.
Fixes#31342
PR Close#31367
If a package delcares a class internally on an NgModule, ngcc
needs to be able to add a public export to this class's type.
Previously, if the typing file for the declared is not imported
from the typings entry-point file, then ngcc cannot find it.
Now we try to guess the .d.ts files from the equivalent .js
files.
PR Close#31411
Non-wild-card path-mappings were not being matched correctly.
Further path-mapped secondary entry-points that
were imported from the associated primary entry-point were not
being martched correctly.
Fixes#31274
PR Close#31450
Adds the new `classMapInterpolate1` through `classMapInterpolate8` instructions which handle interpolations inside the `class` attribute and moves the interpolation logic internally. This allows us to remove the `interpolationX` instructions in a follow-up PR.
These changes also add an error if an interpolation is encountered inside a `style` tag (e.g. `style="width: {{value}}"`). Up until now this would actually generate valid instructions, because `styleMap` goes through the same code path as `classMap` which does support interpolation. At runtime, however, `styleMap` would set invalid styles that look like `<div style="0:w;1:i;2:d;3:t;4:h;5::;7:1;">`. In `ViewEngine` interpolations inside `style` weren't supported either, however there we'd output invalid styles like `<div style="unsafe">`, even if the content was trusted.
PR Close#31211
When a class uses Angular decorators such as `@Input`, `@Output` and
friends without an Angular class decorator, they are compiled into a
static `ngBaseDef` field on the class, with the TypeScript declaration
of the class being altered to declare the `ngBaseDef` field to be of type
`ɵɵBaseDef`. This type however requires a generic type parameter that
corresponds with the type of the class, however the compiler did not
provide this type parameter. As a result, compiling a program where such
invalid `ngBaseDef` declarations are present will result in compilation
errors.
This commit fixes the problem by providing the generic type parameter.
Fixes#31160
PR Close#31210
Some formats of CommonJS put the decorator helper calls
outside the class IIFE as statements on the top level of the
source file.
This commit adds support to the `CommonJSReflectionHost`
for this format.
PR Close#31335
Adds chaining to the `property`, `attribute` and `updateSyntheticHostBinding` instructions when they're used in a host binding.
This PR resolves FW-1404.
PR Close#31296
The TS compiler is likely to test paths with extensions and try to
load them as files. Therefore `fileExists()` and methods that rely
on it need to be able to distinguish between real files and directories
that have paths that look like files.
This came up as a bug in ngcc when trying to process `ngx-virtual-scroller`,
which relies upon a library called `@tweenjs/tween.js`.
PR Close#31289
If an entry-point has missing dependencies then it cannot be
processed and is marked as invalid. Similarly, if an entry-point
has dependencies that have been marked as invalid then that
entry-point too is invalid. In all these cases, ngcc should quietly
ignore these entry-points and continue processing what it can.
Previously, if an entry-point had more than one entry-point that
was transitively invalid then ngcc was crashing rather than
ignoring the entry-point.
PR Close#31276
Our module resolution prefers `.js` files over `.d.ts` files because
occasionally libraries publish their typings in the same directory
structure as the compiled JS files, i.e. adjacent to each other.
The standard TS module resolution would pick up the typings
file and add that to the `ts.Program` and so they would be
ignored by our analyzers. But we need those JS files, if they
are part of the current package.
But this meant that we also bring in JS files from external
imports from outside the package, which is not desired.
This was happening for the `@fire/storage` enty-point
that was importing the `firebase/storage` path.
In this commit we solve this problem, for the case of imports
coming from a completely different package, by saying that any
file that is outside the package root directory must be an external
import and so we do not analyze those files.
This does not solve the potential problem of imports between
secondary entry-points within a package but so far that does
not appear to be a problem.
PR Close#30591
Rather than passing a number of individual arguments, we can
just pass an `EntryPointBundle`, which already contains them.
This is also a precursor to using more of the properties in the bundle.
PR Close#30591
This will allow users of the `EntryPointBundle` to use some of the `EntryPoint`
properties without us having to pass them around one by one.
PR Close#30591
Previously we expected the constructor parameter `decorators`
property to be an array wrapped in a function. Now we also support
an array not wrapped in a function.
PR Close#30591
Some packages do not actually provide a `typings` field in their
package.json. But TypeScript naturally infers the typings file from
the location of the JavaScript source file.
This commit modifies ngcc to do a similar inference when finding
entry-points to process.
Fixes#28603 (FW-1299)
PR Close#30591
There are scenarios where it is not possible for ngcc to guess the format
or configuration of an entry-point just from the files on disk.
Such scenarios include:
1) Unwanted entry-points: A spurious package.json makes ngcc think
there is an entry-point when there should not be one.
2) Deep-import entry-points: some packages allow deep-imports but do not
provide package.json files to indicate to ngcc that the imported path is
actually an entry-point to be processed.
3) Invalid/missing package.json properties: For example, an entry-point
that does not provide a valid property to a required format.
The configuration is provided by one or more `ngcc.config.js` files:
* If placed at the root of the project, this file can provide configuration
for named packages (and their entry-points) that have been npm installed
into the project.
* If published as part of a package, the file can provide configuration
for entry-points of the package.
The configured of a package at the project level will override any
configuration provided by the package itself.
PR Close#30591
Previously each test relied on large shared mock file-systems, which
makes it difficult to reason about what is actually being tested.
This commit breaks up these big mock file-systems into smaller more
focused chunks.
PR Close#30591
To improve cross platform support, all file access (and path manipulation)
is now done through a well known interface (`FileSystem`).
For testing a number of `MockFileSystem` implementations are provided.
These provide an in-memory file-system which emulates operating systems
like OS/X, Unix and Windows.
The current file system is always available via the static method,
`FileSystem.getFileSystem()`. This is also used by a number of static
methods on `AbsoluteFsPath` and `PathSegment`, to avoid having to pass
`FileSystem` objects around all the time. The result of this is that one
must be careful to ensure that the file-system has been initialized before
using any of these static methods. To prevent this happening accidentally
the current file system always starts out as an instance of `InvalidFileSystem`,
which will throw an error if any of its methods are called.
You can set the current file-system by calling `FileSystem.setFileSystem()`.
During testing you can call the helper function `initMockFileSystem(os)`
which takes a string name of the OS to emulate, and will also monkey-patch
aspects of the TypeScript library to ensure that TS is also using the
current file-system.
Finally there is the `NgtscCompilerHost` to be used for any TypeScript
compilation, which uses a given file-system.
All tests that interact with the file-system should be tested against each
of the mock file-systems. A series of helpers have been provided to support
such tests:
* `runInEachFileSystem()` - wrap your tests in this helper to run all the
wrapped tests in each of the mock file-systems.
* `addTestFilesToFileSystem()` - use this to add files and their contents
to the mock file system for testing.
* `loadTestFilesFromDisk()` - use this to load a mirror image of files on
disk into the in-memory mock file-system.
* `loadFakeCore()` - use this to load a fake version of `@angular/core`
into the mock file-system.
All ngcc and ngtsc source and tests now use this virtual file-system setup.
PR Close#30921
Prior to this commit, the logic to extract query information from class fields used an instance of regular Error class to throw an error. As a result, some useful information (like reference to a specific field) was missing. Replacing Error class with FatalDiagnosticError one makes the error more verbose that should simplify debugging.
PR Close#31123
Add an IndexingContext class to store indexing information and a
transformer module to generate indexing analysis. Integrate the indexing
module with the rest of NgtscProgram and add integration tests.
Closes#30959
PR Close#31151
Previously, the usage of equality operators ==, ===, != and !== was not
supported in ngtsc's static interpreter. This commit adds support for
such operators and includes tests.
Fixes#31076
PR Close#31145
Optimizations to skip compiling source files that had not changed
did not account for the case where only a resource file changes,
such as an external template or style file.
Now we track such dependencies and trigger a recompilation
if any of the previously tracked resources have changed.
This will require a change on the CLI side to provide the list of
resource files that changed to trigger the current compilation by
implementing `CompilerHost.getModifiedResourceFiles()`.
Closes#30947
PR Close#30954
This commit fixes a couple of issues with TS 3.5 compatibility in order to
unblock migration of g3. Mostly 'any's are added, and there are no behavior
changes.
PR Close#31174
A temporary check is in place to determine whether a key in an object
literal needs to be quoted during emit. Previously, only the presence of
a dash caused a key to become quoted, this however is not sufficient for
@angular/flex-layout to compile properly as it has dots in its inputs.
This commit extends the check to also use quotes when a dot is present.
Fixes#30114
PR Close#31146
Currently each property binding generates an instruction like this:
```
property('prop1', ctx.value1);
property('prop2', ctx.value2);
```
The problem is that we're repeating the call to `property` for each of the properties. Since the `property` instruction returns itself, we can chain all of the calls which is more compact and it looks like this:
```
property('prop1', ctx.value1)('prop2', ctx.value2);
```
These changes implement the chaining behavior for regular property bindings and for synthetic ones, however interpolated ones are still handled like before, because they use a separate instruction.
This PR resolves FW-1389.
PR Close#31078
Add support for indexing of property reads, method calls in a template.
Visit AST of template syntax expressions to extract identifiers.
Child of #30959
PR Close#30963
George Kalpakas
Pete Bacon Darwin
JoostK
Alex Rickabaugh
Ayaz Hafiz
Greg Magolan
Igor Minar
crisbeto
Kara Erickson
Matias Niemelä
Matt Lewis
Paul Gschwendtner
Jon Wallsten
Andrew Kushnir
Olivier Combe
Matt Lewis
Alex Eagle