JIT needs to identify which type is `ChangeDetectorRef`. It was doing so
by importing `ChangeDetectorRef` and than comparing the types. This creates
circular dependency as well as prevents tree shaking. The new solution is
to brand the class with `__ChangeDetectorRef__` so that it can be identified
without creating circular dependency.
PR Close#39621
`LContainer` stores `ViewRef`s this is not quite right as it creates
circular dependency between the two types. Also `LContainer` should not
be aware of `ViewRef` which iv ViewEngine specific construct.
PR Close#39621
Due to historical reasons `Injector.__NG_ELEMENT_ID__` was set to `-1`.
This changes it to be consistent with other `*Ref.__NG_ELEMENT_ID__`
constructs.
PR Close#39621
`Renderer2` is declared in ViewEngine but it sub-classed in Ivy. This creates a circular
dependency between ViewEngine `Renderer2` which needs to declare `__NG_ELEMENT_ID__` and
ivy factory which needs to create it. The workaround used to be to pass the `Renderer2`
through stack but that created a very convoluted code. This refactoring simply bundles the
two files together and removes the stack workaround making the code simpler to follow.
PR Close#39621
`ChangeDetectorRef` is declared in ViewEngine but it sub-classed in Ivy. This creates a circular
dependency between ViewEngine `ChangeDetectorRef` which needs to declare `__NG_ELEMENT_ID__` and
ivy factory which needs to create it. The workaround used to be to pass the `ChangeDetectorRef`
through stack but that created a very convoluted code. This refactoring simply bundles the
two files together and removes the stack workaround making the code simpler to follow.
PR Close#39621
`ViewContainerRef` is declared in ViewEngine but it sub-classed in Ivy. This creates a circular
dependency between ViewEngine `ViewContainerRef` which needs to declare `__NG_ELEMENT_ID__` and
ivy factory which needs to create it. The workaround used to be to pass the `ViewContainerRef`
through stack but that created a very convoluted code. This refactoring simply bundles the
two files together and removes the stack workaround making the code simpler to follow.
PR Close#39621
`TemplateRef` is declared in ViewEngine but it sub-classed in Ivy. This creates a circular
dependency between ViewEngine `TemplateRef` which needs to declare `__NG_ELEMENT_ID__` and
ivy factory which needs to create it. The workaround used to be to pass the `TemplateRef`
through stack but that created a very convoluted code. This refactoring simply bundles the
two files together and removes the stack workaround making the code simpler to follow.
PR Close#39621
`ElementRef` is declared in ViewEngine but it sub-classed in Ivy. This creates a circular
dependency between ViewEngine `ElementRef` which needs to declare `__NG_ELEMENT_ID__` and
ivy factory which needs to create it. The workaround used to be to pass the `ElementRef`
through stack but that created a very convoluted code. This refactoring simply bundles the
two files together and removes the stack workaround making the code simpler to follow.
PR Close#39621
Close#39348
Now `NgZone` has an option `shouldCoalesceEventChangeDetection` to coalesce
multiple event handler's change detections to one async change detection.
And there are some cases other than `event handler` have the same issues.
In #39348, the case like this.
```
// This code results in one change detection occurring per
// ngZone.run() call. This is entirely feasible, and can be a serious
// performance issue.
for (let i = 0; i < 100; i++) {
this.ngZone.run(() => {
// do something
});
}
```
So such kind of case will trigger multiple change detections.
And now with Ivy, we have a new `markDirty()` API will schedule
a requestAnimationFrame to trigger change detection and also coalesce
the change detections in the same event loop, `markDirty()` API doesn't
only take care `event handler` but also all other cases `sync/macroTask/..`
So this PR add a new option to coalesce change detections for all cases.
test(core): add test case for shouldCoalesceEventChangeDetection option
Add new test cases for current `shouldCoalesceEventChangeDetection` in `ng_zone.spec`, since
currently we only have integration test for this one.
PR Close#39422
With the update to our labeling scheme across the repository, the L2 triage
labels for PRs needs to be updated to no longer require a label type which
doesn't exist: `type: *`
PR Close#39655
`setComponentScope` was previously undocumented. This commit adds a short
explanation of what the function does, and adds a link to a doc which
explains issues with cycles in more detail.
PR Close#39662
ngtsc will avoid emitting generated imports that would create an import
cycle in the user's program. The main way such imports can arise is when
a component would ordinarily reference its dependencies in its component
definition `directiveDefs` and `pipeDefs`. This requires adding imports,
which run the risk of creating a cycle.
When ngtsc detects that adding such an import would cause this to occur, it
instead falls back on a strategy called "remote scoping", where a side-
effectful call to `setComponentScope` in the component's NgModule file is
used to patch `directiveDefs` and `pipeDefs` onto the component. Since the
NgModule file already imports all of the component's dependencies (to
declare them in the NgModule), this approach does not risk adding a cycle.
It has several large downsides, however:
1. it breaks under `sideEffects: false` logic in bundlers including the CLI
2. it breaks tree-shaking for the given component and its dependencies
See this doc for further details: https://hackmd.io/Odw80D0pR6yfsOjg_7XCJg?view
In particular, the impact on tree-shaking was exacerbated by the naive logic
ngtsc used to employ here. When this feature was implemented, at the time of
generating the side-effectful `setComponentScope` call, the compiler did not
know which of the component's declared dependencies were actually used in
its template. This meant that unlike the generation of `directiveDefs` in
the component definition itself, `setComponentScope` calls had to list the
_entire_ compilation scope of the component's NgModule, including directives
and pipes which were not actually used in the template. This made the tree-
shaking impact much worse, since if the component's NgModule made use of any
shared NgModules (e.g. `CommonModule`), every declaration therein would
become un-treeshakable.
Today, ngtsc does have the information on which directives/pipes are
actually used in the template, but this was not being used during the remote
scoping operation. This commit modifies remote scoping to take advantage of
the extra context and only list used dependencies in `setComponentScope`
calls, which should ameliorate the tree-shaking impact somewhat.
PR Close#39662
This commit adds bazel rules to test whether linking the golden partial
files for test cases produces the same output as a full compile of the
test case would.
PR Close#39617
This commit contains the basic runner logic and a couple of sample test cases
for the "full compile" compliance tests, where source files are compiled
to full definitions and checked against expectations.
PR Close#39617
This commit renames the original `compliance` test directory to `compliance_old`.
Eventually this directory will be deleted once all the tests have been
migrated to the new test case based compliance tests.
PR Close#39617
Similar to #39613, #39609, and #38898, we should store the `keySpan` for
Reference nodes so that we can accurately map from a template node to a
span in the original file. This is most notably an issue at the moment
for directive references `#ref="exportAs"`. The current behavior for the
language service when requesting information for the reference
is that it will return a text span that results in
highlighting the entire source when it should only highlight "ref" (test
added for this case as well).
PR Close#39616
Though we currently have the knowledge of where the `key` for an
event binding appears during parsing, we do not propagate this
information to the output AST. This means that once we produce the
template AST, we have no way of mapping a template position to the key
span alone. The best we can currently do is map back to the
`sourceSpan`. This presents problems downstream, specifically for the
language service, where we cannot provide correct information about a
position in a template because the AST is not granular enough.
This is essentially identical to the change from #38898, but for event
bindings rather than input bindings.
PR Close#39609
Similar to #39609 and #38898, though we currently have the knowledge of where the key for an
attribute appears during parsing, we do not propagate this
information to the output AST. This means that once we produce the
template AST, we have no way of mapping a template position to the key
span alone. The best we can currently do is map back to the
sourceSpan. This presents problems downstream, specifically for the
language service, where we cannot provide correct information about a
position in a template because the AST is not granular enough.
PR Close#39613
The resource loader uses TypeScript's module resolution system to
determine at which locations it needs to look for a resource file. A
marker string is used to force the module resolution to fail, such that
all failed lookup locations can then be considered for actual resource
resolution. Any filesystem requests targeting files/directories that
contain the marker are known not to exist, so no filesystem request
needs to be done at all.
PR Close#39604
The type alias allows for this pattern to be more easily used in other
areas of the compiler code. The current usages of this pattern have been
updated to use the type alias.
PR Close#39604
When a `ViewContainerRef` is injected, we dynamically create a comment node next to the host
so that it can be used as an anchor point for inserting views. The comment node is inserted
through the `appendChild` helper from `node_manipulation.ts` in most cases.
The problem with using `appendChild` here is that it has some extra logic which doesn't return
a parent `RNode` if an element is at the root of a component. I __think__ that this is a performance
optimization which is used to avoid inserting an element in one place in the DOM and then
moving it a bit later when it is projected. This can break down in some cases when creating
a `ViewContainerRef` for a non-component node at the root of another component like the following:
```
<root>
<div #viewContainerRef></div>
</root>
```
In this case the `#viewContainerRef` node is at the root of a component so we intentionally don't
insert it, but since its anchor element was created manually, it'll never be projected. This will
prevent any views added through the `ViewContainerRef` from being inserted into the DOM.
These changes resolve the issue by not going through `appendChild` at all when creating a comment
node for `ViewContainerRef`. This should work identically since `appendChild` doesn't really do
anything with the T structures anyway, it only uses them to reach the relevant DOM nodes.
Fixes#39556.
PR Close#39599
Currently when an instance of the `FormControlName` directive is destroyed, the Forms package invokes
the `cleanUpControl` to clear all directive-specific logic (such as validators, onChange handlers,
etc) from a bound control. The logic of the `cleanUpControl` function should revert all setup
performed by the `setUpControl` function. However the `cleanUpControl` is too aggressive and removes
all callbacks related to the onChange and disabled state handling. This is causing problems when
a form control is bound to multiple FormControlName` directives, causing other instances of that
directive to stop working correctly when the first one is destroyed.
This commit updates the cleanup logic to only remove callbacks added while setting up a control
for a given directive instance.
The fix is needed to allow adding `cleanUpControl` function to other places where cleanup is needed
(missing this function calls in some other places causes memory leak issues).
PR Close#39623
* Fixes that the Ivy styling logic wasn't accounting for `!important` in the property value.
* Fixes that the default DOM renderer only sets `!important` on a property with a dash in its name.
* Accounts for the `flags` parameter of `setStyle` in the server renderer.
Fixes#35323.
PR Close#39603
Since WebStorm 2019.1, all of Angular Compiler validations has been implemented
as inspections, which has some additional benefits of being able to provide some
basic quick fixes like adding missing selector property, or something as neat as
auto-module import.
See https://intellij-support.jetbrains.com/hc/en-us/community/posts/360009914880
Signed-off-by: Adrien Crivelli <adrien.crivelli@gmail.com>
PR Close#39637
In #39470, the `deploy-to-firebase.sh` script (used to deploy AIO to
Firebase when building an upstream branch), was replaced by an
equivalent JS script. In this new `deploy-to-firebase.js` script, we
were overly aggressive with suppressing command output, which made it
hard to investigate failures ([example failing CI job][1]).
This commit updates the `deploy-to-firebase.js` script to capture
command output as usual in the CI job logs. This makes the output
similar to the one generated by the old [deploy-to-firebase.sh][2]
script ([example CI logs][3]).
One concern with capturing command output is having the value of a
secret environment variables leaked in the logs. This is not the case
here, since:
1. The secret env vars are not printed from the commands that use them.
2. CircleCI will [mask the values of secret env vars][4] in the output.
As an extra precaution (although not strictly necessary), we run `yarn`
with the `--silent` option, which avoid echoing the executed yarn
commands.
[1]: https://circleci.com/gh/angular/angular/849310
[2]: https://github.com/angular/angular/blob/3b0b7d22109c79b4dceb/aio/scripts/deploy-to-firebase.sh
[3]: https://circleci.com/gh/angular/angular/848109
[4]: https://circleci.com/docs/2.0/env-vars/#secrets-masking
PR Close#39596
The commit updates the AIO deployment script to also print the commit
SHA. This makes it easier to check whether a version has been
successfully deployed, by comparing the commit SHA from the CI job with
the SHA in the version string in the footer of the AIO app.
PR Close#39596
TCB generation occasionally transforms binding expressions twice, which can
result in a `BindingPipe` operation being `resolve()`'d multiple times. When
the pipe does not exist, this caused multiple OOB diagnostics to be recorded
about the missing pipe.
This commit fixes the problem by making the OOB recorder track which pipe
expressions have had diagnostics produced already, and only producing them
once per expression.
PR Close#39517
Misko Hevery
Marcono1234
JiaLiPassion
Joey Perrott
Alex Rickabaugh
Kapunahele Wong
Pete Bacon Darwin
Yvonne Allen
Andrew Scott
JoostK
Alan Agius
Kristiyan Kostadinov
Andrew Kushnir
SephirotJustin
Adrien Crivelli
Leif Segen
mgechev
David Shevitz
George Kalpakas