After #24113 there is 2 `TNode` in those tests:
- 1 for the host,
- 1 for the text node.
The PR #23924 status was green because it branched off master before #24113 was
merged in.
PR Close#24208
This PR tackles a simple case where ViewRef definition point (<ng-template>) is the
same as the insertion point (ViewContainerRef requested on the said <ng-template>).
For this particular case we can assume that we know a container into which a given
view will be inserted when a view is created. This is not true fall all the possible
cases so follow-up PR will be needed to extend this basic implementation.
PR Close#24179
This commit builds out enough of the JIT compiler to render
//packages/core/test/bundling/todo, and allows the tests to run in
JIT mode.
To play with the app, run:
bazel run --define=compile=jit //packages/core/test/bundling/todo:prodserver
PR Close#24138
In ngIvy directives matching (determining which directives are active based
on a CSS seletor) happens at runtime. This means that runtime needs to have
enough context to match directives. This PR takes care of cases where a directive's
selector should match bindings (ex. [foo]="exp") and event handlers (ex. (out)="do()").
In the mentioned cases we need to have binding / output "attributes" for directive's
CSS selector matching purposes. At the same time those are not regular attributes and
as such should not be reflected in the DOM.
Closes#23706
PR Close#23991
Bazel has a restriction that a single output (eg. a compiled version of
//packages/common) can only be produced by a single rule. This precludes
the Angular repo from having multiple rules that build the same code. And
the complexity of having a single rule produce multiple outputs (eg. an
ngc-compiled version of //packages/common and an Ivy-enabled version) is
too high.
Additionally, the Angular repo has lots of existing tests which could be
executed as-is under Ivy. Such testing is very valuable, and it would be
nice to share not only the code, but the dependency graph / build config
as well.
Thus, this change introduces a --define flag 'compile' with three potential
values. When --define=compile=X is set, the entire build system runs in a
particular mode - the behavior of all existing targets is controlled by
the flag. This allows us to reuse our entire build structure for testing
in a variety of different manners. The flag has three possible settings:
* legacy (the default): the traditional View Engine (ngc) build
* local: runs the prototype ngtsc compiler, which does not rely on global
analysis
* jit: runs ngtsc in a mode which executes tsickle, but excludes the
Angular related transforms, which approximates the behavior of plain
tsc. This allows the main packages such as common to be tested with
the JIT compiler.
Additionally, the ivy_ng_module() rule still exists and runs ngc in a mode
where Ivy-compiled output is produced from global analysis information, as
a stopgap while ngtsc is being developed.
PR Close#24056
Short-circuitable expressions (using ternary & binary operators) could not use
the regular binding mechanism as it relies on the bindings being checked every
single time - the index is incremented as part of checking the bindings.
Then for pure function kind of bindings we use a different mechanism with a
fixed index. As such short circuiting a binding check does not mess with the
expected binding index.
Note that all pure function bindings are handled the same wether or not they
actually are short-circuitable. This allows to keep the compiler and compiled
code simple - and there is no runtime perf cost anyway.
PR Close#24039
This commit adds a mechanism by which the @angular/core annotations
for @Component, @Injectable, and @NgModule become decorators which,
when executed at runtime, trigger just-in-time compilation of their
associated types. The activation of these decorators is configured
by the ivy_switch mechanism, ensuring that the Ivy JIT engine does
not get included in Angular bundles unless specifically requested.
PR Close#23833
Previously, ngOnDestroy was only called on services which were statically
determined to have ngOnDestroy methods. In some cases, such as with services
instantiated via factory functions, it's not statically known that the service
has an ngOnDestroy method.
This commit changes the runtime to look for ngOnDestroy when instantiating
all DI tokens, and to call the method if it's present.
Fixes#22466Fixes#22240Fixes#14818
PR Close#23755
Prior to this patch, if an element is queried and animated for 0 seconds
(just a style() call and nothing else) then the styles applied would not
be properly cleaned up due to their camelCased nature.
PR Close#23633
Fix a corner case where eager providers were getting constructed twice if the provider was requested before the initialization of the NgModule is complete.
PR Close#23559
The bug fixed here steams from the fact that we are traversing too far up
in the views tree hierarchy in the destroyViewTree function.
The logic in destroyViewTree is off if we start removal at an embedded view
without any child views. For such a case we should just clean up (cleanUpView)
this one view without paying attention to next / parent views.
PR Close#23482
Ivy definition looks something like this:
```
class MyService {
static ngInjectableDef = defineInjectable({
…
});
}
```
Here the argument to `defineInjectable` is well known public contract which needs
to be honored in backward compatible way between versions. The type of the
return value of `defineInjectable` on the other hand is private and can change
shape drastically between versions without effecting backwards compatibility of
libraries publish to NPM. To our users it is effectively an opaque token.
For this reson why declare the return value of `defineInjectable` as `never`.
PR Close#23383
Ivy definition looks something like this:
```
class MyService {
static ngInjectableDef = defineInjectable({
…
});
}
```
Here the argument to `defineInjectable` is well known public contract which needs
to be honored in backward compatible way between versions. The type of the
return value of `defineInjectable` on the other hand is private and can change
shape drastically between versions without effecting backwards compatibility of
libraries publish to NPM. To our users it is effectively an `OpaqueToken`.
By prefixing the type with `ɵ` we are communicating the the outside world that
the value is not public API and is subject to change without backward compatibility.
PR Close#23371
- Remove default injection value from `inject` / `directiveInject` since
it is not possible to set using annotations.
- Module `Injector` is stored on `LView` instead of `LInjector` data
structure because it can change only at `LView` level. (More efficient)
- Add `ngInjectableDef` to `IterableDiffers` so that existing tests can
pass as well as enable `IterableDiffers` to be injectable without
`Injector`
PR Close#23345
This change changes:
- compiler uses `directiveInject` instead of `inject` for `Directive`s
- unifies the flags in `di` as well as `render3`
- changes the signature of `directiveInject` to match `inject` In prep for #23330
- compiler now generates flags for injection.
Compiler portion of #23342
Prep for #23330
PR Close#23345
When compiling templates the compiler would often bind to
closest context rather than the component context.
The only time one should be binding to the cont component is
in explicit cases where the inner template declares local variable.
PR Close#23168
As we no longer create native (RNode) comment nodes for containers,
we need to execute logic for finding a next sibiling node with RNode
when inserting a view.
The mentioned logic need to be updated for the case of dynamically
created containers (LContainerNode). Indeed, we need to be able to
descend into dynamically inserted views while looking for a RNode.
To achieve this we need to have a pointer from a host LNode to a
dynamically created LContainerNode).
PR Close#23193
- properly display initial checked state
- properly remove a todo
Please note that the 'archive' option still doesn't
work correctly as listening to component outputs doesn't
seem to work (onArchive() is never called).
PR Close#23161
Currently the context for inject() is only set when the token is seen
for the first time. This has two issues:
* It should always be set when injecting from that injector, because
a constructor may wish to call inject() directly.
* If an NgModuleFactory is .create()'d twice, and an ngInjectableDef
token is requested from each of them, the second time will fail.
This is because the first injection adds the provider definition
and calls the factory, and the provider definitions are shared.
The second injector will see the provider definition and call the
factory to create an instance, but without setting the correct
context for inject().
Fixes angular/material2#10586.
PR Close#23148
Remove `containerRefreshStart` and `containerRefreshEnd` instruction
from the output.
Generate directives as a list in `componentDef` rather than inline into
instructions. This is consistent in making selector resolution runtime
so that translation of templates can follow locality.
PR Close#22921
Newer version of TS is stricter about types and flags counter-variant
types in some situations. This change inlines the DirectiveDefArgs
into the arguments which:
1) removes the inheritance which caused the issue and
2) Makes it more friendly to IDEs since they will not report comments.
Closes#22877Closes#22843
PR Close#22897
This adds compilation of @NgModule providers and imports into
ngInjectorDef statements in generated code. All @NgModule annotations
will be compiled and the @NgModule decorators removed from the
resultant js output.
All @Injectables will also be compiled in Ivy mode, and the decorator
removed.
PR Close#22458
BREAKING CHANGE:
The `<template>` tag was deprecated in Angular v4 to avoid collisions (i.e. when
using Web Components).
This commit removes support for `<template>`. `<ng-template>` should be used
instead.
BEFORE:
<!-- html template -->
<template>some template content</template>
# tsconfig.json
{
# ...
"angularCompilerOptions": {
# ...
# This option is no more supported and will have no effect
"enableLegacyTemplate": [true|false]
}
}
AFTER:
<!-- html template -->
<ng-template>some template content</ng-template>
PR Close#22783
Adds a stub for `elementStyle` and `elementClass` instruction
with a canonical spec for the compiler. The spec shows the the
compiler should be using `elementStyle` and `elementClass` instruction
in place of `[class]` and `[style]` bindings respectively.
PR Close#22719
Rename:
- `elementClass` (short: `k`) => `elementClassNamed` (short: `kn`)
- `elementStyle` (short: `s`) => `elementStyleNamed` (short: `sn`)
Currently `[class.name]` is `elementClass(0, ‘name’, value)`. We would
like to introduce new binding `[class]` which needs a new instruction
ideally `elementClass(0, value)`. Doing the rename creates space
to create such an instruction in subsequent change.
PR Close#22719
This commit fixes a bug that would result in views insert / remove
even if a view needed only refresh operation.
The crux of the bug was that we were looking for a view to update
only in the LContainer.nextIndex position. This is incorrect as a
view with a given block id could be present later in the views
array (this happens if we about to remove a view in the middle of
the views array).
The code in this fix searches for a view to update in the views array and
can remove views in the middle of the views collection. Previously we
would remove views at the end of the collection only.
PR Close#22656
Allow passing an optional timeout to Testability's whenStable(). If
specified, if Angular is not stable before the timeout is hit, the
done callback will be invoked with a list of pending macrotasks.
Also, allows an optional update callback, which will be invoked whenever
the set of pending macrotasks changes. If this callback returns true,
the timeout will be cancelled and the done callback will not be invoked.
If the optional parameters are not passed, whenStable() will work
as it did before, whether or not the task tracking zone spec is
available.
This change also migrates the Testability unit tests off the deprecated
AsyncTestCompleter.
PR Close#16863
The new rollup rule disables inlining symbols in debug mode. This makes
it look as if there would be more symbols but in reality these are the
symbols which are no longer being inlined.
PR Close#22747
Rename @Injectable({scope -> providedIn}).
Instead of {providedIn: APP_ROOT_SCOPE}, accept {providedIn: 'root'}.
Also, {providedIn: null} implies the injectable should not be added
to any scope.
PR Close#22655
By providing a top level sanitization methods (rather than service) the
compiler can generate calls into the methods only when needed. This makes
the methods tree shakable.
PR Close#22540
* Add correct mapping from camel case to kebab case for CSS style
names
* Remove internal CSS methods in favor of native Domino APIs
Fixes#19235
PR Close#22263
This patch removes the need to include the Web Animations API Polyfill
(web-animations-js) as a dependency. Angular will now fallback to using
CSS Keyframes in the event that `element.animate` is no longer supported
by the browser.
In the event that an application does use `AnimationBuilder` then the
web-animations-js polyfill is required to enable programmatic,
position-based access to an animation.
Closes#17496
PR Close#22143
This patch ensures that if the NoopAnimationsModule is used then it will
correctly report the associated `totalTime` property within the emitted
AnimationEvent instance when an animation event trigger is fired.
BREAKING CHANGE: When animation is trigged within a disabled zone, the
associated event (which an instance of AnimationEvent) will no longer
report the totalTime as 0 (it will emit the actual time of the
animation). To detect if an animation event is reporting a disabled
animation then the `event.disabled` property can be used instead.
PR Close#22225
@Injectable() supports a scope parameter which specifies the target module.
However, it's still difficult to specify that a particular service belongs
in the root injector. A developer attempting to ensure that must either
also provide a module intended for placement in the root injector or target
a module known to already be in the root injector (e.g. BrowserModule).
Both of these strategies are cumbersome and brittle.
Instead, this commit adds a token APP_ROOT_SCOPE which provides a
straightforward way of targeting the root injector directly, without
requiring special knowledge of modules within it.
PR Close#22185
This commit bundles 3 important changes, with the goal of enabling tree-shaking
of services which are never injected. Ordinarily, this tree-shaking is prevented
by the existence of a hard dependency on the service by the module in which it
is declared.
Firstly, @Injectable() is modified to accept a 'scope' parameter, which points
to an @NgModule(). This reverses the dependency edge, permitting the module to
not depend on the service which it "provides".
Secondly, the runtime is modified to understand the new relationship created
above. When a module receives a request to inject a token, and cannot find that
token in its list of providers, it will then look at the token for a special
ngInjectableDef field which indicates which module the token is scoped to. If
that module happens to be in the injector, it will behave as if the token
itself was in the injector to begin with.
Thirdly, the compiler is modified to read the @Injectable() metadata and to
generate the special ngInjectableDef field as part of TS compilation, using the
PartialModules system.
Additionally, this commit adds several unit and integration tests of various
flavors to test this change.
PR Close#22005
This is a customization of the rollup_bundle rule from rules_nodejs
which adds the build-optimizer as a plugin.
Add a functional test with fast round-trip that asserts the minified app
still works.
Publish the min.js artifact on circleCI so we can track its size.
PR Close#22004
By adding attributes on the <ng-content> element template authors
can decide how content should be re-projected (or, in other words:
which selectors should match re-projected content).
PR Close#21935
Implement NgOnChangesFeature, ViewContainerRef, TemplateRef,
and the renderEmbeddedTemplate instruction, and wire together the
pieces required for the ngForOf directive to work.
PR Close#21430
To prepare for pending ngForOf work, the dep from instructions -> query
should be broken. This will enable a dep from di -> instructions while
avoiding a di -> instructions -> query -> di cycle.
Analyzing this cycle also uncovered another problem: the implementation
of query() breaks tree-shaking through a hard dependency on DI concepts
of TemplateRef, ElementRef, ViewContainerRef. This is fundamentally due
to how query() can query for those values without any configuration.
Instead, this fix introduces the concept by employing the strategy
pattern, and redefining QueryReadType to pass a function which will
return one of the above values. This strategy is then used for 'read'
instead of an enum in cases where special values should be read from
the DI system.
PR Close#21430
Adding the binding name to the error message recieved by the user gives
extra context on what exactly changed. The tests are also updated to
reflect the new error message.
PR Close#20352
This change makes the code cleaner for the user. It does mean
a little bit more work for us since we have to patch the `type` back
into the `DirectiveDef`. However since the patching happens only once
on startup it should not be significant.
PR Close#21374
This separation is no longer needed since directives are now passed into the `container` as an array rather than as child functions of the `containerStart`
PR Close#21374
This change creates a spec file which contains canonical examples
of how the template compiler will translate templates into expected
output.
PR Close#21374
We used to have a separate `directive` instruction for instantiating
directives. However, such an instruction requires that directives
are created in the correct order, which would require that template
compiler would have knowledge of all dependent directives. This
would break template compilation locality principle.
This change only changes the APIs to expected form but does
not change the semantics. The semantics will need to be corrected
in subsequent commits. The semantic change needed is to
resolve the directive instantiation error at runtime based on
injection dependencies.
PR Close#21374
This helps ensure we use the same tsconfig.json file for all compilations.
Next steps are to make it the same tsconfig.json file used by the editor
PR Close#20964
- Add tests target for `test`, `test_node_only` and `test_web` in `core` package.
- Created a `_testing_init` pseudo package where bootstrap code for tests is kept.
- Moved `source_map_util` from `test` to `testing` so to prevent circular dependency.
- Removed `visibility:public` for testing `BUILD` packages.
PR Close#21053
`main()` function used to be needed to support dart, since dart
Does not allow top level statements. Since we no longer use dart
The need for `main()` has been removed.
In preparation for `Basel` and standardized way of running tests
we are removing `main()`
PR Close#21053
This patch fixes animations so that if multiple sub @triggers are used
and are blocked by a parent animation then the engine will not lead
itself into an infinite loop.
PR Close#21119
This PR fixes a circular dependency among those files in Renderer3:
`query` -> `di` -> `instructions` -> `query` -> ...
Looking at the above dependencies the `di` -> `instructions` import is
a problematic one. Previously `di` had an import from `instructions`
since we can known about "current node" only in `instructions`
(and we need "current node" to create node injector instances).
This commit refactors the code in the way that functions in the
`di` file don't depend on any info stored module-global variables
in `instructions`.
PR Close#20855
Add enough BUILD files to make it possible to
`bazel build packages/core/test`
Also re-format BUILD.bazel files with Buildifier.
Add a CI lint check that they stay formatted.
PR Close#20768
Victor Berchet
JoostK
Pawel Kozlowski
Alex Rickabaugh
Marc Laval
Kara Erickson
Vikram Subramanian
Miško Hevery
Alex Eagle
Matias Niemelä
swseverance
Igor Minar
Rafael
Joey Perrott
Olivier Combe
Veres Lajos
Adam Plumer
Michael Giambalvo
Trotyl
Oussama Ben Brahim
guillaumebarranco
Kara
Emilio
Martin Sikora
Chuck Jazdzewski
David-Emmanuel Divernois
Xander Garbett
Benjamin Ingberg