The deployment to aio is currently failing because #37721 introduced
"project" entry into the firebase.json which means that we now need to
select the deployment target before deploying to firebase.
This change fixes the issue and refactors the file to be easier to read.
I also added extra echo statements so that the CI logs are easier to
read in case we need to troubleshoot future issues.
PR Close#37762
This typo caused the script to fail on Linux (interestingly it works fine on Mac).
This is a painful reminder that we should not write any more Bash scripts EVER. shelljs FTW! :-)
PR Close#37754
v9.angular.io was used to pilot the firebase hosting multisites setup for angular.io.
The deployments so far have been done manually to control the deployment process.
This change, automates the deployment for v9.angular.io so that future deployments can be made from
the CI.
See https://angular-team.atlassian.net/browse/DEV-125 for more info.
In the process of updating the scripts I rediscovered a bug in the deploy-to-firebase.sh script that
incorrect compared two numbers as strings. This previously worked correctly because we were comparing
single digit numbers. With the release of v10, we now compare 9 > 10 which behaves differently for
strings and numbers. The bug was fixed by switching to an arithmetic comparison of the two variables.
This bug has been fixed on the master branch but not on the 9.1.x branch. I realized this during the
rebase, but found my version to be a bit cleaner, so I kept it.
PR Close#37721
The angular.io production deployment script (`deploy-to-firebase.sh`)
compares the major version corresponding to the current branch (e.g.
`8` for branch `8.1.x`) against the major stable version (e.g. `9` if
the current stable version is `9.1.0`). It then uses the result of that
comparison to determine whether the current branch corresponds to a
newer version than stable (i.e. an RC version) and thus should not be
deployed or to an older version and thus may need to be deployed to an
archive vX.angular.io project.
Previously, the script was using string comparison (`<`) to compare the
two major versions. This could produce incorrect results for an RC major
version that is numerically greater than the stable but
lexicographically smaller. For example, 10 vs 9 (10 is numerically
greater but lexicographically smaller than 9).
Example of a CI job that incorrectly tried to deploy an RC branch to
production: https://circleci.com/gh/angular/angular/726414
This commit fixes it by switching to an integer comparison (i.e. using
the `-lt` operator).
PR Close#37426
This change is part of a larger effort to migrate all golden type
tracking files to a single location. Additionally, this makes it
a bit easier to manage file ownership in pullapprove.
PR Close#36455
Currently destroy hooks are stored in memory as `[1, hook, 5, hook]` where
the numbers represent the index at which to find the context and `hook` is
the function to be invoked. This breaks down for `multi` providers,
because the value at the index will be an array of providers, resulting in
the hook being invoked with an array of all the multi provider values,
rather than the provider that was destroyed. In ViewEngine `ngOnDestroy`
wasn't being called for `multi` providers at all.
These changes fix the issue by changing the structure of the destroy hooks to `[1, hook, 5, [0, hook, 3, hook]]` where the indexes inside the inner array point to the provider inside of the multi provider array. Note that this is slightly different from the original design which called for the structure to be `[1, hook, 5, [hook, hook]`, because in the process of implementing it, I realized that we wouldn't get passing the correct context if only some of the `multi` providers have `ngOnDestroy` and others don't.
I've run the newly-added `view_destroy_hooks` benchmark against these changes and compared it to master. The difference seems to be insignificant (between 1% and 2% slower).
Fixes#35231.
PR Close#35840
Prior to this patch, the `margin` and `padding` properties were not
detected properly by Firefox due to them being shorthand properties.
This patch ensures that both `margin` and `padding` are converted
read as `top right bottom left` in the event that the shorthand
property detection fails for auto-styling in Angular animations.
Fix#35463 (FW-1886)
PR Close#35701
Added additional links which can help user find the things they are
looking for when there are no search results (when searching or on a 404
page).
Note:
This commit increases the main bundle's payload size due to the extra
content of the `aio-search-results` component.
Fixes#31532
PR Close#34978
In #35702, the payload size limit for Ivy builds was bumped to account
for small incremental increases in recent PRs. The ViewEngine size has
also increased similarly (~500B), but it was not updated in #35702,
because its total increase was just below the 500B error threshold (by
6B).
This commit bumps the ViewEngine size limit too.
Note: Any investigation for the Ivy size increase (as a follow-up
to #35702) will most likely also apply to ViewEngine, since the size was
increased by the same amount.
PR Close#34978
This commit updates AIO payload size limit that is triggering a problem after merging 0bc35a71e2. That commit added some payload size, but all checks were "green" for the original PR (#34574), so it looks like it's an accumulated payload size increase from multiple changes. The goal of this commit is to bring the master branch back to "green" state.
PR Close#35702
This commit updates AIO payload size limit that is triggering a problem after merging f95b8ce07e. That commit added some payload size, but all checks were "green" for the PR (https://github.com/angular/angular/pull/34481) after rebase that happened a couple hours before the merge, so this is an accumulated payload size increase from multiple changes. The goal of this commit is to bring the master and patch branches back to "green" state.
PR Close#35538
Before this change content queries with the `descendants: false` option, as implemented in ivy,
would not descendinto `<ng-container>` elements. This behaviour was different from the way the
View Engine worked. This change alligns ngIvy and VE behaviours when it comes to queries and the
`<ng-container>` elements and fixes a common bugs where a query target was placed inside the
`<ng-container>` element with a * directive on it.
Before:
```html
<needs-target>
<ng-container *ngIf="condition">
<div #target>...</div> <!-- this node would NOT match -->
</ng-container>
</needs-target>
```
After:
```html
<needs-target>
<ng-container *ngIf="condition">
<div #target>...</div> <!-- this node WILL match -->
</ng-container>
</needs-target>
```
Fixes#34768
PR Close#35384
This is a follow-up to #35049 with a few minor fixes related to using
the browser provided by `puppeteer` to run tests. Included fixes:
- Make the `webdriver-manager-update.js` really portable. (Previously,
it needed to be run from the directory that contained the
`node_modules/` directory. Now, it can be executed from a subdirectory
and will correctly resolve dependencies.)
- Use the `puppeteer`-based setup in AIO unit and e2e tests to ensure
that the downloaded ChromeDriver version matches the browser version
used in tests.
- Use the `puppeteer`-based setup in the `aio_monitoring_stable` CI job
(as happens with `aio_monitoring_next`).
- Use the [recommended way][1] of getting the browser port when using
`puppeteer` with `lighthouse` and avoid hard-coding the remote
debugging port (to be able to handle multiple instances running
concurrently).
[1]: https://github.com/GoogleChrome/lighthouse/blame/51df179a0/docs/puppeteer.md#L49
PR Close#35381
The update to Angular 9.0.0 appears to have lowered the main.js
file slightly, while the current master build of Angular appears
to have gone up slightly.
PR Close#35379
This change changes the priority order of static styling.
Current priority:
```
(least priority)
- Static
- Component
- Directives
- Template
- Dynamic Binding
- Component
- Map/Interpolation
- Property
- Directives
- Map/Interpolation
- Property
- Template
- Map/Interpolation
- Property
(highest priority)
```
The issue with the above priority is this use case:
```
<div style="color: red;" directive-which-sets-color-blue>
```
In the above case the directive will win and the resulting color will be `blue`. However a small change of adding interpolation to the example like so. (Style interpolation is coming in https://github.com/angular/angular/pull/34202)
```
<div style="color: red; width: {{exp}}px" directive-which-sets-color-blue>
```
Changes the priority from static binding to interpolated binding which means now the resulting color is `red`. It is very surprising that adding an unrelated interpolation and style can change the `color` which was not changed. To fix that we need to make sure that the static values are associated with priority of the source (directive or template) where they were declared. The new resulting priority is:
```
(least priority)
- Component
- Static
- Map/Interpolation
- Property
- Directives
- Static
- Map/Interpolation
- Property
- Template
- Static
- Map/Interpolation
- Property
(highest priority)
```
PR Close#34938
In #35004, we started ignoring yarn's engines check for `yarn install`
in AIO's `test-production.sh` script to fix a failure in the
`aio_monitoring_stable` CI job. (See #35004 for details.)
It turns out that the version of yarn used on the stable branch (1.17.3)
`--ignore-engines` is needed on all yarn commands (including `yarn
run`). Thus, #35004 is not enough to fix the failures.
New example failure: https://circleci.com/gh/angular/angular/604341
This commit turns of the engines check for the whole
`aio_monitoring_stable` CI job to fix the failure and make the job more
robust.
PR Close#35033
There are different `DebugNode`/`DebugElement` implementations (and
associated helper functions) for ViewEngine and Ivy. Additionally, these
classes/functions, which are defined inside the `core` package, are
imported by the `platform-browser` package.
Previously, this code was not tree-shaken as expected in Ivy. #30130
partially addressed the issue, but only for the case where `core` and
`platform-browser` end up in the same closure after webpack's scope
hoisting. In cases where this is not the case, our webpack/terser based
tooling is not capable of tree-shaking it.
This commit fixes the problem, by ensuring that the code retained in Ivy
mode (due to the cross-package import) does not unnecessarily reference
`DebugNode`/`DebugElement`, allowing the code to be tree-shaken away.
This results in a 7.6KB reduction in the size of the main angular.io
bundle.
Jira issue: [FW-1802](https://angular-team.atlassian.net/browse/FW-1802)
PR Close#35003
In #34955, we switched to Node.js v12 on master and 9.0.x. This causes
the `aio_monitoring_job` CI job (which checks out files from the stable
branch; currently 8.2.x) to start failing yarn's engines check (since
the 8.2.x branch expects Node.js version <11).
Example failure: https://circleci.com/gh/angular/angular/602499
Since the job is expected to run with files from both the stable and the
master branches (and since the version of Node.js is not important
here), this commit uses the `--ignore-engines` option to prevent
failures due to Node.js version mismatch.
NOTE:
Typically, the stable and master branch are on the same Node.js version,
because related PRs land on both master and the patch branch. One
exception is during RC periods, when the stable branch is different than
the patch branch. These periods are usually short, but in the case of
9.0.0 the period has lasted several months causing the CI environments
between master and the stable branch to get significantly out-of-sync.
PR Close#35004
This update increases the main bundle by ~0.6KB
payload size snapshot:
456581 Jan 24 22:07 dist/main-es2015.38c39f92eab2fcc8c835.js
541321 Jan 24 22:06 dist/main-es5.38c39f92eab2fcc8c835.js
52487 Jan 24 22:05 dist/polyfills-es2015.b374ef3555a700a97add.js
146193 Jan 24 22:05 dist/polyfills-es5.c7dc569e6c646e42fade.js
2987 Jan 24 22:05 dist/runtime-es2015.29be4028399ae41ba25e.js
2981 Jan 24 22:05 dist/runtime-es5.29be4028399ae41ba25e.js
PR Close#34966
Previously we would write to class/style as strings `element.className` and `element.style.cssText`. Turns out that approach is good for initial render but not good for updates. Updates using this approach are problematic because we have to check to see if there was an out of bound write to style and than perform reconciliation. This also requires the browser to bring up CSS parser which is expensive.
Another problem with old approach is that we had to queue the DOM writes and flush them twice. Once on element advance instruction and once in `hostBindings`. The double flushing is expensive but it also means that a directive can observe that styles are not yet written (they are written after directive executes.)
The new approach uses `element.classList.add/remove` and `element.style.setProperty/removeProperty` API for updates only (it continues to use `element.className` and `element.style.cssText` for initial render as it is cheaper.) The other change is that the styling changes are applied immediately (no queueing). This means that it is the instruction which computes priority. In some circumstances it may result in intermediate writes which are than overwritten with new value. (This should be rare)
Overall this change deletes most of the previous code and replaces it with new simplified implement. The simplification results in code savings.
PR Close#34804
NOTE: This change must be reverted with previous deletes so that it code remains in build-able state.
This change deletes old styling code and replaces it with a simplified styling algorithm.
The mental model for the new algorithm is:
- Create a linked list of styling bindings in the order of priority. All styling bindings ere executed in compiled order and than a linked list of bindings is created in priority order.
- Flush the style bindings at the end of `advance()` instruction. This implies that there are two flush events. One at the end of template `advance` instruction in the template. Second one at the end of `hostBindings` `advance` instruction when processing host bindings (if any).
- Each binding instructions effectively updates the string to represent the string at that location. Because most of the bindings are additive, this is a cheap strategy in most cases. In rare cases the strategy requires removing tokens from the styling up to this point. (We expect that to be rare case)S Because, the bindings are presorted in the order of priority, it is safe to resume the processing of the concatenated string from the last change binding.
PR Close#34616
This change moves information from instructions to declarative position:
- `ɵɵallocHostVars(vars)` => `DirectiveDef.hostVars`
- `ɵɵelementHostAttrs(attrs)` => `DirectiveDef.hostAttrs`
When merging directives it is necessary to know about `hostVars` and `hostAttrs`. Before this change the information was stored in the `hostBindings` function. This was problematic, because in order to get to the information the `hostBindings` would have to be executed. In order for `hostBindings` to be executed the directives would have to be instantiated. This means that the directive instantiation would happen before we had knowledge about the `hostAttrs` and as a result the directive could observe in the constructor that not all of the `hostAttrs` have been applied. This further complicates the runtime as we have to apply `hostAttrs` in parts over many invocations.
`ɵɵallocHostVars` was unnecessarily complicated because it would have to update the `LView` (and Blueprint) while existing directives are already executing. By moving it out of `hostBindings` function we can access it statically and we can create correct `LView` (and Blueprint) in a single pass.
This change only changes how the instructions are generated, but does not change the runtime much. (We cheat by emulating the old behavior by calling `ɵɵallocHostVars` and `ɵɵelementHostAttrs`) Subsequent change will refactor the runtime to take advantage of the static information.
PR Close#34683
This commit increases payload size limits for angular.io application that triggered an error after merging another commit (00f13cc074). The goal of this commit is to bring master back to a "green" state and separate investigation is required to identify the root cause for size increase.
PR Close#34913
We should only generate the `providedIn` property in injectable
defs if it has a non-null value. `null` does not communicate
any information to the runtime that isn't communicated already
by the absence of the property.
This should give us some modest code size savings.
PR Close#34116
For injectables, we currently generate a factory function in the
injectable def (prov) that delegates to the factory function in
the factory def (fac). It looks something like this:
```
factory: function(t) { return Svc.fac(t); }
```
The extra wrapper function is unnecessary since the args for
the factory functions are the same. This commit changes the
compiler to generate this instead:
```
factory: Svc.fac
```
Because we are generating less code for each injectable, we
should see some modest code size savings. AIO's main bundle
is about 1 KB smaller.
PR Close#34076
Previously, the Angular AOT compiler would always add a
`ɵprov` to injectables. But in ngcc this resulted in duplicate `ɵprov`
properties since published libraries already have this property.
Now in ngtsc, trying to add a duplicate `ɵprov` property is an error,
while in ngcc the additional property is silently not added.
// FW-1750
PR Close#34085
The change type was only recorded for `aio/` and was not correct anyway.
For example:
- It considered `package.json` changes as `application` (even if only
`package.json` and `yarn.lock` had changed).
- It failed to account for changes in `@angular/*` dependencies, when
using the locally built Angular packages (instead reporting them as
`other`).
- It only looked at the last commit, so it failed to provide accurate
information for multi-commit builds (which are rare, but possible).
For the above reasons (and because there is no straight-forward way of
fixing it), this commit removes the change type from the uploaded data.
If necessary, it is still possible to find the type of changes from the
uploaded info (e.g. extract the associated commits and look at their
changes using git).
PR Close#33987
The size diff threshold of 1% has proven to be too lenient for us
to catch size regressions in AIO. Since the AIO main bundle is
between 400-500 KB, a size regression must be between 4-5 KB before
it will cause the tests to fail. As a result, we may merge many
changes with smaller regressions of a few KB before the size test
eventually lets us know that the number has increased. The hope is
that lowering the threshold will help us catch the smaller
regressions during code review and prevent the size tests failing at
a random later time when someone catches the size "hot potato".
PR Close#33969
This commit transforms the setClassMetadata calls generated by ngtsc from:
```typescript
/*@__PURE__*/ setClassMetadata(...);
```
to:
```typescript
/*@__PURE__*/ (function() {
setClassMetadata(...);
})();
```
Without the IIFE, terser won't remove these function calls because the
function calls have arguments that themselves are function calls or other
impure expressions. In order to make the whole block be DCE-ed by terser,
we wrap it into IIFE and mark the IIFE as pure.
It should be noted that this change doesn't have any impact on CLI* with
build-optimizer, which removes the whole setClassMetadata block within
the webpack loader, so terser or webpack itself don't get to see it at
all. This is done to prevent cross-chunk retention issues caused by
webpack's internal module registry.
* actually we do expect a short-term size regression while
https://github.com/angular/angular-cli/pull/16228
is merged and released in the next rc of the CLI. But long term this
change does nothing to CLI + build-optimizer configuration and is done
primarly to correct the seemingly correct but non-function PURE annotation
that builds not using build-optimizer could rely on.
PR Close#33337
The payload size increase in the ES5 bundles is (at least partially)
expected, due to fixing some down-leveling corner cases.
Related CLI issue: angular/angular-cli#15673
PR Close#32980
Upgrading to @angular/material 9.0.0-next.0 increases the bundle size
slightly (~1.3KB). This is a natural expectation of library
fixes/improvements.
PR Close#32980
This is mainly to avoid some warning when building the app, such as:
```
WARNING in .../angular/aio/src/environments/environment.archive.ts is
part of the TypeScript compilation but it's unused.
Add only entry points to the 'files' or 'include' properties in your
tsconfig.
```
(Not turning on `fullTemplateTypeCheck` due to lots of errors.)
PR Close#32923
The angular.io project uses Angular and CLI v9, which by default turns
on Ivy mode. However, since ec4381dd4, we explicitly opt out of Ivy.
This commit removes the `enabledIvy: false` configuration, thus allowing
the default behavior of having Ivy on.
NOTE:
This commit only changes the angular.io projects. The docs examples need
to be updated separately (first to Angular and CLI v9 and then to Ivy).
PR Close#32923
Igor Minar
George Kalpakas
Joey Perrott
crisbeto
Andrew Scott
Matias Niemelä
ajitsinghkaler
Andrew Kushnir
Pawel Kozlowski
Pete Bacon Darwin
Greg Magolan
Misko Hevery
Kara Erickson
Filipe Silva
Alex Rickabaugh