After rewriting much of the router doc, it became apparent that the lazy loading/preloading information should be in the lazy loading doc rather than in the router doc. There is now instead a short section that touches on lazy loading but links to the lazy learning document instead of covering it in detail in the router doc.
PR Close#36748
The current implementation for redirecting users inside guards was in place
before the feature was added to allow `CanActivate` and `CanActivateChild` guards
to return `UrlTree` for redirecting users.
Returning `UrlTree` should be the default method, as it provides a more desirable
redirecting experience. When using `router.navigate` followed by `return false`,
the `Router` calls `resetUrlToCurrentUrlTree` (in the `finalize` operator) before
processing the navigation to the new route. This can result in an undesirable
history if the navigation was the first navigation in the application - that is,
the route will briefly be reset to just `/` (see #36187).
Fixes#36187
PR Close#37100
This was originally pushed by @igorminar in #36944, but later reverted in #35621
This commit reintroduces the original changes, and remove the `@angular/http` secion from the deprecations guide.
PR Close#37070
We recently disabled the e2e tests for `upgrade-phonecat-2-hybdrid`
because the switch to APF 10 caused it to fail with an uglify
error. More details in a dedicated issue here:
https://github.com/angular/angular/issues/36957.
We can re-enable the test by switching to Terser that properly
handles ES2015 syntax. Previously the rollup bundle consisted
only of ES5 output as the Angular framework packages provided
ES5 output. With APF 10, there is no ES5 output except for the
non-optimizable UMD format.
Hence we either need to downlevel code to ES5, or use Terser
that supports ES2015 syntax.
Closes#36957.
PR Close#36969
Cindy has been working with us for a while now
and should be listed on AIO as a part of our team.
This commit adds her image / bio to the Angular
contributors page.
PR Close#37076
This commit removes the duplicate `and` found in the
`Support for the development cycle` section part of the
getting started guide.
Fixes#37060
PR Close#37067
The message can be improved by removing the unneeded ‘the’ (x2).
Before:
Angular is running in the development mode. Call enableProdMode() to enable the production mode.
After:
Angular is running in development mode. Call enableProdMode() to enable production mode.
Closes#36570
PR Close#36571
All migration guides did not have a direct link to access them so added them to the side nav in the section updating to version 9 for direct access, it also helps to add right side nav to these migration guides
Fixes#33582
PR Close#34979
With this change we add FireFox Extended Support Release (ESR) to the list of supported browsers. The ESR latest version is used mainly in corporate environments (intranet applications, etc.) due to its support and stability guarantees.
PR Close#36973
While creating the new tutorial section, I hit o instead of i when
typing the word 'tooltip.' This is understandable, as they are right
next to each other on the keyboard. I might move to the Dvorak
keyboard layout to avoid such errors in the future.
PR Close#36955
change to aot docs to include changes after angular 9
aot is true for new applications created, also it will
be updated to aot true once app is updated using ng update
PR Close#35487
In v9, we deprecated the use of ModuleWithProviders
without a generic. In v10, we will be requiring the
generic when using ModuleWithProviders. You can read
more about the reasoning behind this change in the
migration guide:
http://v9.angular.io/guide/migration-module-with-providers
PR Close#36892
This patch is the first of many commits to disable sanitization for
[stlye.prop] and [style] bindings in Angular.
Historically, style-based sanitization has only been required for old
IE browsers (IE6 and IE7). Since Angular does not support these old
browsers at all, there is no reason for the framework to support
style-based sanitization.
PR Close#35621
We stopped publishing @angular/http to npm a while back (v7?), so from the perspective of our
customer @angular/http has been removed a long time ago and mentioninig it now that we actually
removed the code from our repo is just confusing.
PR Close#36944
esm5 and fesm5 are no longer needed and have been deprecated in the past.
https://v9.angular.io/guide/deprecations#esm5-and-fesm5-code-formats-in-angular-npm-packages
This commit modifies ng_package to no longer distribute these two formats in npm packages
built by ng_package (e.g. @angular/core).
This commit intentionally doesn't fully clean up the ng_package rule to remove all traces of esm5 and fems5
build artifacts as that is a bigger cleanup and currently we are narrowing down the scope of this change
to the MVP needed for v10, which in this case is 'do not put esm5 and fesm5' into the npm packages.
More cleanup to follow: https://angular-team.atlassian.net/browse/FW-2143
BREAKING CHANGE: esm5 and fesm5 format is no longer distributed in
Angular's npm packages e.g. @angular/core
If you are not using Angular CLI to build your application or library,
and you need to be able to build es5 artifacts, then you will need to
downlevel the distributed Angular code to es5 on your own.
Angular CLI will automatically downlevel the code to es5 if differential
loading is enabled in the Angular project, so no action is required from
Angular CLI users.
PR Close#36944
The purpose of the `WrappedValue` is to allow same object instance to be treated as different for the purposes of change detection. It is currently used with `async` pipe and only with `Observables`. The use case which it covers is if the `Observable` produces the same instance of the value but it is desirable to still try to mark it as changed for the purposes of change detection.
We believe tha the above use case is too rare to warrant special handling in the framework. (Having special handling causes application slowdown for the users and mental load for the developers.) No replacement is planned for this deprecation.
PR Close#36819
Previously, using undecorated base classes and using
ModuleWithProviders without a generic were listed
as deprecated features.
In v10, these features will be removed and an error
will be thrown instead. This commit updates the
deprecation guide to reflect this change.
PR Close#36891
The index of the deprecation guide contains a list
of deprecated APIs and when they can be removed.
This commit updates the likely removal version for
APIs that were previously listed as v10, as we are
not removing them in this version.
PR Close#36891
Add documentation in the deprecations markdown file about the deprecation of IE 9 and 10.
Additionally, add note in browser support document about deprecation.
PR Close#36887
This change aligns behavior for resolvers which return EMPTY. Currently EMPTY resolvers have inconsistent behavior:
- One resolver that returns EMPTY => won't navigate and just ends on ResolveStart router event.
- Two resolvers where both return EMPTY => throws "Error: Uncaught (in promise): EmptyError: no elements in sequence"
- Two resolvers where one returns a value and the other one returns EMPTY => Navigates successfully.
With this change any EMPTY resolver will cancel navigation.
BREAKING CHANGE: Any resolver which return EMPTY will cancel navigation.
If you want to allow the navigation to continue, you will need to update the resolvers to emit
some value, (i.e. defaultIfEmpty(...), of(...), etc).
PR Close#24195
PR Close#24621
Previously it was not possible to provide `CacheQueryOptions` ([MDN](https://developer.mozilla.org/en-US/docs/Web/API/Cache)) for querying the Cache.
This commit introduces a new parameter called `cacheQueryOptions` for `DataGroup` and `AssetGroup`.
Currently only `ignoreSearch` is supported as `ignoreVary` and `ignoreMethod` would require using
the complete Request object for matching which is not possible with the current implementation.
Closes#28443
PR Close#34663
Correct typo in the router docs, changing "as your app growns" to "as your app grows". Previously the wrong spelling was used and this commit rectifies this.
PR Close#36786
link is very deep down on architecture page this commit is part of a larger effort to standardise ownload sections on angular.io
This commit partially addresses #35459
PR Close#36565
link is very deep down on acessibility page this commit is part of a larger effort to standardise ownload sections on angular.io
This commit partially addresses #35459
PR Close#36561
Version 7.0.0 is under LTS until 18-4-2020 removed it from the table which showed it as LTS and added to versions that are no longer under support.
PR Close#36708
In "Getting started" guide pipes are not intoduced anywhere but are used in the guide.
Added refrence to pipes for better consistency in the tutorial.
Fixes#36375
PR Close#36584
This rewrite changes headings to focus on user tasks rather than features,
verifies that content is up-to-date and complete, removes colloquial phrases,
adds prerequisites, and expands on a task-based section in the beginning
(a quick reference).
PR Close#35566
thefliik
Ajit Singh
Kapunahele Wong
Andrew Scott
Sonu Kapoor
cexbrayat
Paul Gschwendtner
Judy Bogart
Kara Erickson
Sonu Kapoor
Michiel Kikkert
Alan Agius
David Shevitz 🔵
Santosh Yadav
Matias Niemelä
Igor Minar
Misko Hevery
Martin Sikora
Maximilian Koeller
Grant Fleming
Annie Wang
木杉
Tony Bove
crisbeto
Stephen Fluin