In Angular programs, changing a file may require other files to be
emitted as well due to implicit NgModule dependencies. For example, if
the selector of a directive is changed then all components that have
that directive in their compilation scope need to be recompiled, as the
change of selector may affect the directive matching results.
Until now, the compiler solved this problem using a single dependency
graph. The implicit NgModule dependencies were represented in this
graph, such that a changed file would correctly also cause other files
to be re-emitted. This approach is limited in a few ways:
1. The file dependency graph is used to determine whether it is safe to
reuse the analysis data of an Angular decorated class. This analysis
data is invariant to unrelated changes to the NgModule scope, but
because the single dependency graph also tracked the implicit
NgModule dependencies the compiler had to consider analysis data as
stale far more often than necessary.
2. It is typical for a change to e.g. a directive to not affect its
public API—its selector, inputs, outputs, or exportAs clause—in which
case there is no need to re-emit all declarations in scope, as their
compilation output wouldn't have changed.
This commit implements a mechanism by which the compiler is able to
determine the impact of a change by comparing it to the prior
compilation. To achieve this, a new graph is maintained that tracks all
public API information of all Angular decorated symbols. During an
incremental compilation this information is compared to the information
that was captured in the most recently succeeded compilation. This
determines the exact impact of the changes to the public API, which
is then used to determine which files need to be re-emitted.
Note that the file dependency graph remains, as it is still used to
track the dependencies of analysis data. This graph does no longer track
the implicit NgModule dependencies, which allows for better reuse of
analysis data.
These changes also fix a bug where template type-checking would fail to
incorporate changes made to a transitive base class of a
directive/component. This used to be a problem because transitive base
classes were not recorded as a transitive dependency in the file
dependency graph, such that prior type-check blocks would erroneously
be reused.
This commit also fixes an incorrectness where a change to a declaration
in NgModule `A` would not cause the declarations in NgModules that
import from NgModule `A` to be re-emitted. This was intentionally
incorrect as otherwise the performance of incremental rebuilds would
have been far worse. This is no longer a concern, as the compiler is now
able to only re-emit when actually necessary.
Fixes#34867Fixes#40635Closes#40728
PR Close#40947
The `SourceFile` and associated code is general and reusable in
other projects (such as `@angular/localize`). Moving it to `ngtsc`
makes it more easily shared.
PR Close#37114
The `Logger` interface and its related classes are general purpose
and could be used by other tooling. Moving it into ngtsc is a more
suitable place from which to share it - similar to the FileSystem stuff.
PR Close#37114
When computing the dependencies between packages which are not in
node_modules, we may need to rely upon path-mappings to find the path
to the imported entry-point.
This commit allows ngcc to use the path-mappings from a tsconfig
file to find dependencies. By default any tsconfig.json file in the directory
above the `basePath` is loaded but it is possible to use a path to a
specific file by providing the `tsConfigPath` property to mainNgcc,
or to turn off loading any tsconfig file by setting `tsConfigPath` to `null`.
At the command line this is controlled via the `--tsconfig` option.
Fixes#36119
PR Close#36180
The library used by ngcc to update the source files (MagicString) is able
to generate a source-map but it is not able to account for any previous
source-map that the input text is already associated with.
There have been various attempts to fix this but none have been very
successful, since it is not a trivial problem to solve.
This commit contains a novel approach that is able to load up a tree of
source-files connected by source-maps and flatten them down into a single
source-map that maps directly from the final generated file to the original
sources referenced by the intermediate source-maps.
PR Close#35132
Previously, the compiler performed an incremental build by analyzing and
resolving all classes in the program (even unchanged ones) and then using
the dependency graph information to determine which .js files were stale and
needed to be re-emitted. This algorithm produced "correct" rebuilds, but the
cost of re-analyzing the entire program turned out to be higher than
anticipated, especially for component-heavy compilations.
To achieve performant rebuilds, it is necessary to reuse previous analysis
results if possible. Doing this safely requires knowing when prior work is
viable and when it is stale and needs to be re-done.
The new algorithm implemented by this commit is such:
1) Each incremental build starts with knowledge of the last known good
dependency graph and analysis results from the last successful build,
plus of course information about the set of files changed.
2) The previous dependency graph's information is used to determine the
set of source files which have "logically" changed. A source file is
considered logically changed if it or any of its dependencies have
physically changed (on disk) since the last successful compilation. Any
logically unchanged dependencies have their dependency information copied
over to the new dependency graph.
3) During the `TraitCompiler`'s loop to consider all source files in the
program, if a source file is logically unchanged then its previous
analyses are "adopted" (and their 'register' steps are run). If the file
is logically changed, then it is re-analyzed as usual.
4) Then, incremental build proceeds as before, with the new dependency graph
being used to determine the set of files which require re-emitting.
This analysis reuse avoids template parsing operations in many circumstances
and significantly reduces the time it takes ngtsc to rebuild a large
application.
Future work will increase performance even more, by tackling a variety of
other opportunities to reuse or avoid work.
PR Close#34288
To improve cross platform support, all file access (and path manipulation)
is now done through a well known interface (`FileSystem`).
For testing a number of `MockFileSystem` implementations are provided.
These provide an in-memory file-system which emulates operating systems
like OS/X, Unix and Windows.
The current file system is always available via the static method,
`FileSystem.getFileSystem()`. This is also used by a number of static
methods on `AbsoluteFsPath` and `PathSegment`, to avoid having to pass
`FileSystem` objects around all the time. The result of this is that one
must be careful to ensure that the file-system has been initialized before
using any of these static methods. To prevent this happening accidentally
the current file system always starts out as an instance of `InvalidFileSystem`,
which will throw an error if any of its methods are called.
You can set the current file-system by calling `FileSystem.setFileSystem()`.
During testing you can call the helper function `initMockFileSystem(os)`
which takes a string name of the OS to emulate, and will also monkey-patch
aspects of the TypeScript library to ensure that TS is also using the
current file-system.
Finally there is the `NgtscCompilerHost` to be used for any TypeScript
compilation, which uses a given file-system.
All tests that interact with the file-system should be tested against each
of the mock file-systems. A series of helpers have been provided to support
such tests:
* `runInEachFileSystem()` - wrap your tests in this helper to run all the
wrapped tests in each of the mock file-systems.
* `addTestFilesToFileSystem()` - use this to add files and their contents
to the mock file system for testing.
* `loadTestFilesFromDisk()` - use this to load a mirror image of files on
disk into the in-memory mock file-system.
* `loadFakeCore()` - use this to load a fake version of `@angular/core`
into the mock file-system.
All ngcc and ngtsc source and tests now use this virtual file-system setup.
PR Close#30921
Previously, metadata registration (the recording of collected metadata
during analysis of directives, pipes, and NgModules) was only used to
produce the `LocalModuleScope`, and thus was handled by the
`LocalModuleScopeRegistry`.
However, the template type-checker also needs information about registered
directives, outside of the NgModule scope determinations. Rather than
reuse the scope registry for an unintended purpose, this commit introduces
new abstractions for metadata registration and lookups in a separate
'metadata' package, which the scope registry implements.
This paves the way for a future commit to make use of this metadata for the
template type-checking system.
Testing strategy: this commit is a refactoring which introduces no new
functionality, so existing tests are sufficient.
PR Close#29698
This commit adds a `tracePerformance` option for tsconfig.json. When
specified, it causes a JSON file with timing information from the ngtsc
compiler to be emitted at the specified path.
This tracing system is used to instrument the analysis/emit phases of
compilation, and will be useful in debugging future integration work with
@angular/cli.
See ngtsc/perf/README.md for more details.
PR Close#29380
JoostK
Pete Bacon Darwin
Alex Rickabaugh
George Kalpakas