`TNode.insertBeforeIndex` is only populated when i18n is present. This
change puts all code which reads `insertBeforeIndex` behind a
dynamically loaded functions which are set only when i18n code executes.
PR Close#39301
The `ExpandoInstructions` was unnecessarily convoluted way to solve the
problem of calling the `HostBindingFunction`s on components and
directives. The code was complicated and hard to fallow.
The replacement is a simplified way to achieve the same thing, which
is also more efficient in space and speed.
PR Close#39301
`expandoInstructions` uses negative numbers by `-x`. This has lead to
issues in the paste as `-0` is processed as float rather than integer
leading to de-optimization.
PR Close#39233
IMPORTANT: `HEADER_OFFSET` should only be refereed to the in the `ɵɵ*` instructions to translate
instruction index into `LView` index. All other indexes should be in the `LView` index space and
there should be no need to refer to `HEADER_OFFSET` anywhere else.
PR Close#39233
When looking at `TView` debug template only Element nodes were displayed
as `TNode.Element` was used for both `RElement` and `RText`.
Additionally no text was stored in `TNode.value`. The result was that
the whole template could not be reconstructed. This refactoring creates
`TNodeType.Text` and store the text value in `TNode.value`.
The refactoring also changes `TNodeType` into flag-like structure make
it more efficient to check many different types at once.
PR Close#39233
Before this refactoring/fix the ICU would store the current selected
index in `TView`. This is incorrect, since if ICU is in `ngFor` it will
cause issues in some circumstances. This refactoring properly moves the
state to `LView`.
closes#37021closes#38144closes#38073
PR Close#39233
`TemplateFixture` used to have positional parameters and many tests got
hard to read as number of parameters reach 10+ with many of them `null`.
This refactoring changes `TemplateFixture` to take named parameters
which improves usability and readability in tests.
PR Close#39233
getCheckNoChangesMode was discovered to be unclear as to the purpose of
it. This refactor is a simple renaming to make it much clearer what that
method and property does.
PR Close#39277
`NodeInjector` is store in expando as a list of values in an array. The
offset constant into the array have been brought together into a single
`NodeInjectorOffset` enum with better documentation explaining their usage.
PR Close#38707
This change makes `getPreviousOrParentTNode` return `TNode|null` (rather
than just `TNode`) which is more reflective of the reality. The
`getPreviousOrParentTNode` can be `null` upon entering the `LView`.
PR Close#38707
`TNodeType.View` was created to support inline views. That feature did
not materialize and we have since removed the instructions for it, leave
an unneeded `TNodeType.View` which was still used in a very
inconsistent way. This change no longer created `TNodeType.View` (and
there will be a follow up chang to completely remove it.)
Also simplified the mental model so that `LView[HOST]`/`LView[T_HOST]`
always point to the insertion location of the `LView`.
PR Close#38707
Host `TNode` was passed into `getOrCreateTNode` just so that we can
compute weather or not we are a root node. This was needed because
`previousOrParentTNode` could have `TNode` from `TView` other then
current `TView`. This is confusing mental model. Previous change
ensured that `previousOrParentTNode` must always be part of `TView`,
which enabled this change to remove the unneeded argument.
PR Close#38707
`previousOrParentTNode` stores current `TNode`. Due to inconsistent
implementation the value stored would sometimes belong to the current
`TView` and sometimes to the parent. We have extra logic which accounts
for it. A better solution is to just ensure that `previousOrParentTNode`
always belongs to current `TNode`. This simplifies the mental model
and cleans up some code.
PR Close#38707
This commit adds `ngDevMode` guard to throw some errors only in dev mode
(similar to how things work in other parts of Ivy runtime code). The
`ngDevMode` flag helps to tree-shake these error messages from production
builds (in dev mode everything will work as it works right now) to decrease
production bundle size.
PR Close#38612
This commit updates the code to move generated i18n statements into the `consts` field of
ComponentDef to avoid invoking `$localize` function before component initialization (to better
support runtime translations) and also avoid problems with lazy-loading when i18n defs may not
be present in a chunk where it's referenced.
Prior to this change the i18n statements were generated at the top leve:
```
var I18N_0;
if (typeof ngI18nClosureMode !== "undefined" && ngI18nClosureMode) {
var MSG_X = goog.getMsg(“…”);
I18N_0 = MSG_X;
} else {
I18N_0 = $localize('...');
}
defineComponent({
// ...
template: function App_Template(rf, ctx) {
i0.ɵɵi18n(2, I18N_0);
}
});
```
This commit updates the logic to generate the following code instead:
```
defineComponent({
// ...
consts: function() {
var I18N_0;
if (typeof ngI18nClosureMode !== "undefined" && ngI18nClosureMode) {
var MSG_X = goog.getMsg(“…”);
I18N_0 = MSG_X;
} else {
I18N_0 = $localize('...');
}
return [
I18N_0
];
},
template: function App_Template(rf, ctx) {
i0.ɵɵi18n(2, 0);
}
});
```
Also note that i18n template instructions now refer to the `consts` array using an index
(similar to other template instructions).
PR Close#38404
The currently selected ICU was incorrectly being stored it `TNode`
rather than in `LView`.
Remove: `TIcuContainerNode.activeCaseIndex`
Add: `LView[TIcu.currentCaseIndex]`
PR Close#38345
This change provides better typing for the `LView.debug` property which
is intended to be used by humans while debugging the application with
`ngDevMode` turned on.
In addition this chang also adds jasmine matchers for better asserting
that `LView` is in the correct state.
PR Close#38359
I18n code breaks up internationalization into opCodes which are then stored
in arrays. To make it easier to debug the codebase this PR adds `debug`
property to the arrays which presents the data in human readable format.
PR Close#38154
We currently use 16 bits to store information about nodes in a view.
The 16 bits give us 65536 entries in the array, but the problem is that while
the number is large, it can be reached by ~4300 directive instances with host
bindings which could realistically happen is a very large view, as seen in #37876.
Once we hit the limit, we end up overflowing which eventually leads to a runtime error.
These changes bump to using 20 bits which gives us around 1048576 entries in
the array or 16 times more than the current amount which could still technically
be reached, but is much less likely and the user may start hitting browser limitations
by that point.
I picked the 20 bit number since it gives us enough buffer over the 16 bit one,
while not being as massive as a 24 bit or 32 bit.
I've also added a dev mode assertion so it's easier to track down if it happens
again in the future.
Fixes#37876.
PR Close#38014
Currently we read lifecycle hooks eagerly during `ɵɵdefineComponent`.
The result is that it is not possible to do any sort of meta-programing
such as mixins or adding lifecycle hooks using custom decorators since
any such code executes after `ɵɵdefineComponent` has extracted the
lifecycle hooks from the prototype. Additionally the behavior is
inconsistent between AOT and JIT mode. In JIT mode overriding lifecycle
hooks is possible because the whole `ɵɵdefineComponent` is placed in
getter which is executed lazily. This is because JIT mode must compile a
template which can be specified as `templateURL` and those we are
waiting for its resolution.
- `+` `ɵɵdefineComponent` becomes smaller as it no longer needs to copy
lifecycle hooks from prototype to `ComponentDef`
- `-` `ɵɵNgOnChangesFeature` feature is now always included with the
codebase as it is no longer tree shakable.
Previously we have read lifecycle hooks from prototype in the
`ɵɵdefineComponent` so that lifecycle hook access would be monomorphic.
This decision was made before we had `T*` data structures. By not
reading the lifecycle hooks we are moving the megamorhic read form
`ɵɵdefineComponent` to instructions. However, the reads happen on
`firstTemplatePass` only and are subsequently cached in the `T*` data
structures. The result is that the overall performance should be same
(or slightly better as the intermediate `ComponentDef` has been
removed.)
- [ ] Remove `ɵɵNgOnChangesFeature` from compiler. (It will no longer
be a feature.)
- [ ] Discuss the future of `Features` as they hinder meta-programing.
Fix#30497
PR Close#35464
Fixes the following issues related to how we validate properties during JIT:
- The invalid property warning was printing `null` as the node name
for `ng-content`. The problem is that when generating a template from
`ng-content` we weren't capturing the node name.
- We weren't running property validation on `ng-container` at all.
This used to be supported on ViewEngine and seems like an oversight.
In the process of making these changes, I found and cleaned up a
few places where we were passing in `LView` unnecessarily.
PR Close#37773
Invoking a callback registered through `ViewRef.onDestroy` throws an error, because we weren't registering it correctly in the internal data structure. These changes also remove the `storeCleanupFn` function, because it was mostly identical to `storeCleanupWithContext` and was only used in one place.
Fixes#36213.
PR Close#37543
This commit replaces an assert with more descriptive error message that is thrown in case `<ng-template>` or `<ng-container>` is used as host element for a Component.
Resolves#35240.
PR Close#35916
This PR provides a more helpful error than the one currently present:
`el.setAttribute is not a function`. It is not valid to have directives with host bindings
on `ng-template` or `ng-container` nodes. VE would silently ignore this, while Ivy
attempts to set the attribute and throws an error because these are comment nodes
and do not have `setAttribute` functionality.
It is better to throw a helpful error than to silently ignore this because
putting a directive with host binding on an `ng-template` or `ng-container` is most often a mistake.
Developers should be made aware that the host binding will have no effect in these cases.
Note that an error is already thrown in Ivy, as mentioned above, so this
is not a breaking change and can be merged to both master and patch.
Resolves#35994
PR Close#37111
Previously all static styling information (including the ones from component/directive host bindings) would get merged into a single value before it would be written into the `@Input('class'/'style')`. The new behavior specifically excludes host values from the `@Input` bindings.
Fix#35383
PR Close#35889
Dynamic embedded views were conceptually different from inline embedded views, but we have since
removed the inline embedded views so we now only have "embedded views".
See related refactoring work to remove inline embedded views in #34715
and #37073.
PR Close#37117
The _tViewNode field (that was marked as internal) on the ViewRef is not
necessery as a reference to a relevant TView is available as a local
variable.
PR Close#36814
The ActiveIndexFlag is no longer needed because we no longer have "inline embedded views".
There is only one type of embedded view so we do not need complex tracking for
inline embedded views.
HAS_TRANSPLANTED_VIEWS now takes the place of the ACTIVE_INDEX slot as a
simple boolean rather than being a shifted flag inside the ACTIVE_INDEX bits.
PR Close#37073
Changes the Ivy unknown element/property messages from being logged with `console.warn` to `console.error`. This should make them a bit more visible without breaking existing apps. Furthermore, a lot of folks filter out warning messages in the dev tools' console, whereas errors are usually still shown.
BREAKING CHANGE:
Warnings about unknown elements are now logged as errors. This won't break your app, but it may trip up tools that expect nothing to be logged via `console.error`.
Fixes#35699.
PR Close#36399
Only refresh transplanted views at the insertion location in Ivy.
Previously, Ivy would check transplanted views at both the insertion and
declaration points. This is achieved by adding a marker to the insertion
tree when we encounter a transplanted view that needs to be refreshed at
its declaration. We use this marker as an extra indication that we still
need to descend and refresh those transplanted views at their insertion
locations even if the insertion view and/or its parents are not dirty.
This change fixes several issues:
* Transplanted views refreshed twice if both insertion and declaration
are dirty. This could be an error if the insertion component changes
result in data not being available to the transplanted view because it
is slated to be removed.
* CheckAlways transplanted views not refreshed if shielded by
non-dirty OnPush (fixes#35400)
* Transplanted views still refreshed when insertion tree is detached
(fixes#21324)
PR Close#35968
If there's an error during the first creation pass of a `TView`, the data structure may be corrupted which will cause framework assertion failures downstream which can mask the user's error. These changes add a new flag to the `TView` that indicates whether the first creation pass was successful, and if it wasn't we try re-create the `TView`.
Fixes#31221.
PR Close#36381
Prior to this change, animations-related runtime logic assumed that the @HostBinding and @HostListener with synthetic (animations) props are used for Components only. However having @HostBinding and @HostListener with synthetic props on Directives is also supported by View Engine. This commit updates the logic to select correct renderer to execute instructions (current renderer for Directives and sub-component renderer for Components).
This PR resolves#35501.
PR Close#35568
Prior to this commit unbound attributes were treated as possible inputs to structural directives. Since structural directives can only accepts inputs defined using microsyntax expression (e.g. `<div *dir="exp">`), such unbound attributes should not be considered as inputs. This commit aligns Ivy and View Engine behavior and avoids using unbound attributes as inputs to structural directives.
PR Close#36441
Prior to this commit, the unknown property check was unnecessarily invoked for AOT-compiled components (for these components, the check happens at compile time). This commit updates the code to avoid unknown property verification for AOT-compiled components by checking whether schemas information is present (as a way to detect whether this is JIT or AOT compiled component).
Resolves#35945.
PR Close#36072
Currently destroy hooks are stored in memory as `[1, hook, 5, hook]` where
the numbers represent the index at which to find the context and `hook` is
the function to be invoked. This breaks down for `multi` providers,
because the value at the index will be an array of providers, resulting in
the hook being invoked with an array of all the multi provider values,
rather than the provider that was destroyed. In ViewEngine `ngOnDestroy`
wasn't being called for `multi` providers at all.
These changes fix the issue by changing the structure of the destroy hooks to `[1, hook, 5, [0, hook, 3, hook]]` where the indexes inside the inner array point to the provider inside of the multi provider array. Note that this is slightly different from the original design which called for the structure to be `[1, hook, 5, [hook, hook]`, because in the process of implementing it, I realized that we wouldn't get passing the correct context if only some of the `multi` providers have `ngOnDestroy` and others don't.
I've run the newly-added `view_destroy_hooks` benchmark against these changes and compared it to master. The difference seems to be insignificant (between 1% and 2% slower).
Fixes#35231.
PR Close#35840
This commit performs a few updates to internal functions that would be required in upcoming changes to support synthetic host bindings in Directives.
* the `elementPropertyInternal` function was refactored to accept renderer as an argument (prior to that, there was a function that loads the renderer in some specific way for animation bindings)
* `elementPropertyInternal`, `elementAttributeInternal` and `listenerInternal` functions were updated to have a fixed set of arguments (for better performance)
* `elementPropertyInternal` and `elementAttributeInternal` functions were updated to take `tNode` as an argument instead of passing node index (that was used to retrieve `tNode` internally), in some cases we already have `tNode` available or we can retrieve it from the state
The refactoring was triggered by the need to pass different renderers to the `elementPropertyInternal` to support synthetic host bindings in Directives (see this comment for additional context: https://github.com/angular/angular/pull/35568/files#r388034584).
PR Close#35884
This reverts commit 00f3c58bb929d9afa10ab3c4f1b9ee7a0077ba57.
Rolling back because it could be breaking e2e tests that assert that
there are no errors in the console after the assertions have run. We can
re-add this in v10.
PR Close#35845
Changes the Ivy unknown element/property messages from being logged with `console.warn` to `console.error`. This should make them a bit more visible without breaking existing apps. Furthermore, a lot of folks filter out warning messages in the dev tools' console, whereas errors are usually still shown.
Fixes#35699.
PR Close#35798
Before this change `[class]` and `[className]` were both converted into `ɵɵclassMap`. The implication of this is that at runtime we could not differentiate between the two and as a result we treated `@Input('class')` and `@Input('className)` as equivalent.
This change makes `[class]` and `[className]` distinct. The implication of this is that `[class]` becomes `ɵɵclassMap` instruction but `[className]` becomes `ɵɵproperty' instruction. This means that `[className]` will no longer participate in styling and will overwrite the DOM `class` value.
Fix#35577
PR Close#35668
In the `loadRenderer` we make an assumption that the value will always be an `LView`, but if there's a directive on the same node which injects `ViewContainerRef` the `LView` will be wrapped in an `LContainer`. These changes add a call to unwrap the value before we try to read the value off of it.
Fixes#35342.
PR Close#35343
- Adds `TView` into `LFrame`, read the `TView` from `LView` on `enterView`.
- Before this change the `TView` was ofter looked up from `LView` as `lView[TVIEW]`. This is suboptimal since reading from an Array, requires that the read checks array size before the read. This means that such a read has a much higher cost than reading from the property directly. By passing in the `TView` explicitly it makes the code more explicit and faster.
- Some rearrangements of arguments so that `TView` would come before `LView` for consistency.
PR Close#35069
`TNode.directives` was introduced in https://github.com/angular/angular/pull/34938. Turns out that it is unnecessary because the information is already present it `TData` when combining with `TNode.directiveStart` and `TNode.directiveEnd`
Mainly this is true (conceptually):
```
expect(tNode.directives).toEqual(
tData.slice(
tNode.directivesStart,
tNode.directivesEnd - tNode.DirectivesStart -1
)
);
```
The refactoring removes `TNode.directives` and adds `TNode.directiveStyling` as we still need to keep location in the directive in `TNode`
PR Close#35050
This change changes the priority order of static styling.
Current priority:
```
(least priority)
- Static
- Component
- Directives
- Template
- Dynamic Binding
- Component
- Map/Interpolation
- Property
- Directives
- Map/Interpolation
- Property
- Template
- Map/Interpolation
- Property
(highest priority)
```
The issue with the above priority is this use case:
```
<div style="color: red;" directive-which-sets-color-blue>
```
In the above case the directive will win and the resulting color will be `blue`. However a small change of adding interpolation to the example like so. (Style interpolation is coming in https://github.com/angular/angular/pull/34202)
```
<div style="color: red; width: {{exp}}px" directive-which-sets-color-blue>
```
Changes the priority from static binding to interpolated binding which means now the resulting color is `red`. It is very surprising that adding an unrelated interpolation and style can change the `color` which was not changed. To fix that we need to make sure that the static values are associated with priority of the source (directive or template) where they were declared. The new resulting priority is:
```
(least priority)
- Component
- Static
- Map/Interpolation
- Property
- Directives
- Static
- Map/Interpolation
- Property
- Template
- Static
- Map/Interpolation
- Property
(highest priority)
```
PR Close#34938
