Adds a `collectCommentNodes` option on `ParseTemplateOptions` which will cause the returned `ParsedTemplate` to include an array of all html comments found in the template.
PR Close#41251
Adds an error if a reference is used more than once on the same element (e.g. `<div #a #a>`).
We used to have this error in ViewEngine, but it wasn't ported over to Ivy.
Fixes#40536.
PR Close#40538
Similar to #39613, #39609, and #38898, we should store the `keySpan` for
Reference nodes so that we can accurately map from a template node to a
span in the original file. This is most notably an issue at the moment
for directive references `#ref="exportAs"`. The current behavior for the
language service when requesting information for the reference
is that it will return a text span that results in
highlighting the entire source when it should only highlight "ref" (test
added for this case as well).
PR Close#39616
Though we currently have the knowledge of where the `key` for an
event binding appears during parsing, we do not propagate this
information to the output AST. This means that once we produce the
template AST, we have no way of mapping a template position to the key
span alone. The best we can currently do is map back to the
`sourceSpan`. This presents problems downstream, specifically for the
language service, where we cannot provide correct information about a
position in a template because the AST is not granular enough.
This is essentially identical to the change from #38898, but for event
bindings rather than input bindings.
PR Close#39609
Similar to #39609 and #38898, though we currently have the knowledge of where the key for an
attribute appears during parsing, we do not propagate this
information to the output AST. This means that once we produce the
template AST, we have no way of mapping a template position to the key
span alone. The best we can currently do is map back to the
sourceSpan. This presents problems downstream, specifically for the
language service, where we cannot provide correct information about a
position in a template because the AST is not granular enough.
PR Close#39613
The lexer is able to skip leading trivia in the `start` location of tokens.
This makes the source-span more friendly since things like elements
appear to begin at the start of the opening tag, rather than at the
start of any leading whitespace, which could include newlines.
But some tooling requires the full source-span to be available, such
as when tokenizing a text span into an Angular expression.
This commit simply adds the `fullStart` location to the `ParseSourceSpan`
class, and ensures that places where such spans are cloned, this
property flows through too.
PR Close#39486
To support recovery of malformed binding property names like `([a)`,
`[a`, or `()`, the binding parser needs to be more permissive w.r.t. the
kinds of bindings it can detect. This is difficult to do maintainably
with a regex, but is trivial with a "hand-rolled" string parser. This
commit refactors render3's binding attribute parsing to use this method
for multi-delimited bindings (namely via the `()`, `[]`, and `[()]`)
syntax, making the way recovery of malformed bindings in a future patch.
Note that we can keep using a regex for prefix-only binding syntax
(e.g. `bind-`, `ref-`) because validation of the binding is complete
once we have matched the prefix, and the only thing left to do is check
that the binding identifier is non-empty, which is trivial.
Part of #38596
PR Close#39375
Prior to this change, expressions within ICUs would have a source span
corresponding with the whole ICU. This commit narrows down the source
spans of these expressions to the exact location in the source file, as
a prerequisite for reporting type check errors within these expressions.
PR Close#39072
Currently it is impossible to determine the source of a binding that
generates `BoundAttribute` because all bound attributes generated from a
microsyntax expression share the same source span.
For example, in
```html
<div *ngFor="let item of items; trackBy: trackByFn"></div>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
source span for all `BoundAttribute`s generated from microsyntax
```
the `BoundAttribute` for both `ngForOf` and `ngForTrackBy`
share the same source span.
A lot of hacks were necessary in View Engine language service to work
around this limitation. It was done by inspecting the whole source span
then figuring out the relative position of the cursor.
With this change, we introduce a flag to set the binding span as the
source span of the `ParsedProperty` in Ivy AST.
This flag is needed so that we don't have to change VE ASTs.
Note that in the binding parser, we already set `bindingSpan` as the
source span for a `ParsedVariable`, and `keySpan` as the source span for
a literal attribute. This change makes the Ivy AST more consistent by
propagating the binding span to `ParsedProperty` as well.
PR Close#39036
Now that we have `keySpan` for `BoundAttribute` (implemented in
https://github.com/angular/angular/pull/38898) we could do the same
for `Variable`.
This would allow us to distinguish the LHS and RHS from the whole source
span.
PR Close#38965
Though we currently have the knowledge of where the `key` for an
attribute binding appears during parsing, we do not propagate this
information to the output AST. This means that once we produce the
template AST, we have no way of mapping a template position to the key
span alone. The best we can currently do is map back to the
`sourceSpan`. This presents problems downstream, specifically for the
language service, where we cannot provide correct information about a
position in a template because the AST is not granular enough.
PR Close#38898
Previously, the compiler was not able to display template parsing errors as
true `ts.Diagnostic`s that point inside the template. Instead, it would
throw an actual `Error`, and "crash" with a stack trace containing the
template errors.
Not only is this a poor user experience, but it causes the Language Service
to also crash as the user is editing a template (in actuality the LS has to
work around this bug).
With this commit, such parsing errors are converted to true template
diagnostics with appropriate span information to be displayed contextually
along with all other diagnostics. This majorly improves the user experience
and unblocks the Language Service from having to deal with the compiler
"crashing" to report errors.
PR Close#38576
Fixes the following issues related to how we validate properties during JIT:
- The invalid property warning was printing `null` as the node name
for `ng-content`. The problem is that when generating a template from
`ng-content` we weren't capturing the node name.
- We weren't running property validation on `ng-container` at all.
This used to be supported on ViewEngine and seems like an oversight.
In the process of making these changes, I found and cleaned up a
few places where we were passing in `LView` unnecessarily.
PR Close#37773
Currently when the `plural` or `select` keywords in an ICU contain trailing spaces (e.g. `{count, select , ...}`), these spaces are also included into the key names in ICU vars (e.g. "VAR_SELECT "). These trailing spaces are not desirable, since they will later be converted into `_` symbols while normalizing placeholder names, thus causing mismatches at runtime (i.e. placeholder will not be replaced with the correct value). This commit updates the code to trim these spaces while generating an object with placeholders, to make sure the runtime logic can replace these placeholders with the right values.
PR Close#37866
This commit augments the `FactoryDef` declaration of Angular decorated
classes to contain information about the parameter decorators used in
the constructor. If no constructor is present, or none of the parameters
have any Angular decorators, then this will be represented using the
`null` type. Otherwise, a tuple type is used where the entry at index `i`
corresponds with parameter `i`. Each tuple entry can be one of two types:
1. If the associated parameter does not have any Angular decorators,
the tuple entry will be the `null` type.
2. Otherwise, a type literal is used that may declare at least one of
the following properties:
- "attribute": if `@Attribute` is present. The injected attribute's
name is used as string literal type, or the `unknown` type if the
attribute name is not a string literal.
- "self": if `@Self` is present, always of type `true`.
- "skipSelf": if `@SkipSelf` is present, always of type `true`.
- "host": if `@Host` is present, always of type `true`.
- "optional": if `@Optional` is present, always of type `true`.
A property is only present if the corresponding decorator is used.
Note that the `@Inject` decorator is currently not included, as it's
non-trivial to properly convert the token's value expression to a
type that is valid in a declaration file.
Additionally, the `ComponentDefWithMeta` declaration that is created for
Angular components has been extended to include all selectors on
`ng-content` elements within the component's template.
This additional metadata is useful for tooling such as the Angular
Language Service, as it provides the ability to offer suggestions for
directives/components defined in libraries. At the moment, such
tooling extracts the necessary information from the _metadata.json_
manifest file as generated by ngc, however this metadata representation
is being replaced by the information emitted into the declaration files.
Resolves FW-1870
PR Close#35695
This commit propagates the `sourceSpan` and `valueSpan` of a `VariableBinding`
in a microsyntax expression to `ParsedVariable`, and subsequently to
View Engine Variable AST and Ivy Variable AST.
Note that this commit does not propagate the `keySpan`, because it involves
significant changes to the template AST.
PR Close#36047
Currently, would-be binding attributes that are missing binding names
are not parsed as bindings, and fall through as regular attributes. In
some cases, this can lead to a runtime error; trying to assign `#` as a
DOM attribute in an element like in `<div #></div>` fails because `#` is
not a valid attribute name.
Attributes composed of binding prefixes but not defining a binding
should be considered invalid, as this almost certainly indicates an
unintentional elision of a binding by the developer. This commit
introduces error reporting for attributes with a binding name prefix but
no actual binding name.
Closes https://github.com/angular/vscode-ng-language-service/issues/293.
PR Close#34595
Expressions in an inline template binding are improperly recorded as
spaning an offset calculated from the start of the template binding
attribute key, whereas they should be calculated from the start of the
attribute value, which contains the actual binding AST.
PR Close#31813
This commit moves nested i18n section detection to an earlier stage where we convert HTML AST to Ivy AST. This also gives a chance to produce better diagnistic message for nested i18n sections, that also includes a file name and location.
PR Close#33583
If an <ng-template> contains a structural directive (for example *ngIf), Ngtsc generates extra template function with 1 template instruction call. When <ng-template> tag also contains i18n attribute on it, we generate i18nStart and i18nEnd instructions around it, which is unnecessary and breaking runtime. This commit adds a logic to make sure we do not generate i18n instructions in case only `template` is present.
PR Close#32623
Template AST nodes for (bound) attributes, variables and references will
now retain a reference to the source span of their value, which allows
for more accurate type check diagnostics.
PR Close#30181
Currently, template expressions and statements have their location
recorded relative to the HTML element they are in, with no handle to
absolute location in a source file except for a line/column location.
However, the line/column location is also not entirely accurate, as it
points an entire semantic expression, and not necessarily the start of
an expression recorded by the expression parser.
To support record of the source code expressions originate from, add a
new `sourceSpan` field to `ASTWithSource` that records the absolute byte
offset of an expression within a source code.
Implement part 2 of [refactoring template parsing for
stability](https://hackmd.io/@X3ECPVy-RCuVfba-pnvIpw/BkDUxaW84/%2FMA1oxh6jRXqSmZBcLfYdyw?type=book).
PR Close#31391
The content projection mechanism is static, in that it only looks at the static
template nodes before directives are matched and change detection is run.
When you have a selector-based content projection the selection is based
on nodes that are available in the template.
For example:
```
<ng-content selector="[some-attr]"></ng-content>
```
would match
```
<div some-attr="..."></div>
```
If you have an inline-template in your projected nodes. For example:
```
<div *ngIf="..." some-attr="..."></div>
```
This gets pre-parsed and converted to a canonical form.
For example:
```
<ng-template [ngIf]="...">
<div some-attr=".."></div>
</ng-template>
```
Note that only structural attributes (e.g. `*ngIf`) stay with the `<ng-template>`
node. The other attributes move to the contained element inside the template.
When this happens in ivy, the ng-template content is removed
from the component template function and is compiled into its own
template function. But this means that the information about the
attributes that were on the content are lost and the projection
selection mechanism is unable to match the original
`<div *ngIf="..." some-attr>`.
This commit adds support for this in ivy. Attributes are separated into three
groups (Bindings, Templates and "other"). For inline-templates the Bindings
and "other" types are hoisted back from the contained node to the `template()`
instruction, so that they can be used in content projection matching.
PR Close#29041
Angular supports using <style> and <link> tags inline in component
templates, but previously such tags were not implemented within the ngtsc
compiler. This commit introduces that support.
FW-1069 #resolve
PR Close#28997
During build time we remap particular property bindings, because their names don't match their attribute equivalents (e.g. the property for the `for` attribute is called `htmlFor`). This breaks down if the particular element has an input that has the same name, because the property gets mapped to something invalid.
The following changes address the issue by mapping the name during runtime, because that's when directives are resolved and we know all of the inputs that are associated with a particular element.
PR Close#28765
Prior to this change presence of HTML comments inside <ng-content> caused compiler to throw an error that <ng-content> is not empty. Now HTML comments are not considered as a meaningful content, thus no error is thrown. This behavior is now aligned in Ivy/VE.
PR Close#28849
When template bindings are being parsed the event handlers
were receiving a source span that included the whole attribute.
Now they get a span that is focussed on the handler itself.
PR Close#28055
Prior to this change we performed prop and attr name validation at compile time, which failed in case a given prop/attr is an input to a Directive (thus should not be a subject to this check). Since Directive matching in Ivy happens at runtime, the corresponding checks are now moved to runtime as well.
PR Close#28054
Prior to this change, we were unable to match directives using `ng-template` tags (for example the following selector would not work even though there might be some <ng-template>s in a template: `ng-template[directiveA]`. As a result, that broke some components that relies on such selectors to work. In order to resolve the problem, we now pass tag name to the `template` instruction (where we passed `null` before) and this tag name is used for matching at runtime. This update should also help support projecting containers, because the tag name is required to properly match such elements.
PR Close#27636
Prior to this change `projectDef` instructions were placed to root templates only, thus the necessary information (selectors) in nested templates was missing. This update adds the logic to insert `projectDef` instructions to all templates where <ng-content> is present.
PR Close#27384
A long time ago Angular used to support both those attribute notations:
- `*attr='binding'`
- `template=`attr: binding`
Because the last notation has been dropped we can refactor the binding parsing.
Source maps will benefit from that as no `attr:` prefix is added artificialy any
more.
PR Close#23460
