Commit Graph

171 Commits

Author SHA1 Message Date
Andrew Scott f1b0547f0a revert: fix(ivy): R3TestBed should clean up registered modules after each test (#32872) (#33663)
This commit reverts 475e36a.

PR Close #33663
2019-11-12 09:53:16 -08:00
Andrew Scott e1ee90c218 revert: fix(ivy): Only restore registered modules if user compiles modules with TestBed (#32944) (#33663)
This commit reverts 63256b5.

PR Close #33663
2019-11-12 09:53:16 -08:00
Andrew Kushnir eece138fa7 fix(ivy): provider override via TestBed should remove old providers from the list (#33706)
While overriding providers in Ivy TestBed (via TestBed.overrideProvider call), the old providers were retained in the list, since the override takes precedence. However, presence of providers in the list might have side-effect: if a provider has the `ngOnDestroy` lifecycle hook, this hook will be registered and invoked later (when component is destroyed). This commit updates TestBed logic to clear provider list by removing the ones which have overrides.

PR Close #33706
2019-11-11 12:46:16 -08:00
Andrew Scott 1ebe172c2e fix(ivy): Handle overrides for {providedIn: AModule} in R3TestBed (#33606)
This issue was found when debugging a test failure that was using lazy
loaded modules with the router. When doing this, the router calls
`NgModuleFactory.create` for the loaded module. This module gets a new
injector so the overrides provided in TestBed are not applied unless the
Injectable is in the providers list (which is not the case for
{providedIn...} Injectables).

PR Close #33606
2019-11-07 15:34:19 +00:00
JiaLiPassion 8c6fb17d29 build: reference zone.js from source directly instead of npm. (#33046)
Close #32482

PR Close #33046
2019-11-06 00:48:34 +00:00
JiaLiPassion 44623a1161 feat: add a flag in bootstrap to enable coalesce event change detection to improve performance (#30533)
PR Close #30533
2019-11-05 18:58:25 +00:00
Andrew Scott e483acaa17 fix(ivy): ensure overrides for 'multi: true' only appear once in final providers (#33104)
PR Close #33104
2019-10-28 11:00:31 -07:00
Igor Minar 86e1e6c082 feat: typescript 3.6 support (#32946)
BREAKING CHANGE: typescript 3.4 and 3.5 are no longer supported, please update to typescript 3.6

Fixes #32380

PR Close #32946
2019-10-18 13:15:16 -04:00
Matias Niemelä 082aed6e46 revert: feat: add a flag in bootstrap to enable coalesce event change detection to improve performance (#30533) (#33230)
This reverts commit 21c1e14385.

PR Close #33230
2019-10-17 12:50:04 -04:00
Kara Erickson cda9248b33 refactor(core): rename ngInjectorDef to ɵinj (#33151)
Injector defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.

This commit adds the prefix and shortens the name from
ngInjectorDef to inj. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.

PR Close #33151
2019-10-16 16:36:19 -04:00
JiaLiPassion 21c1e14385 feat: add a flag in bootstrap to enable coalesce event change detection to improve performance (#30533)
PR Close #30533
2019-10-16 14:38:36 -04:00
Nikita Potapenko 72494c4411 refactor(core): replace instanceof Array (#33077)
PR Close #33077
2019-10-14 23:44:57 +00:00
Kara Erickson fc93dafab1 refactor(core): rename ngModuleDef to ɵmod (#33142)
Module defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.

This commit adds the prefix and shortens the name from
ngModuleDef to mod. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.

PR Close #33142
2019-10-14 23:08:10 +00:00
Kara Erickson 1a67d70bf8 refactor(core): rename ngDirectiveDef to ɵdir (#33110)
Directive defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.

This commit adds the prefix and shortens the name from
ngDirectiveDef to dir. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.

Note that the other "defs" (ngFactoryDef, etc) will be
prefixed and shortened in follow-up PRs, in an attempt to
limit how large and conflict-y this change is.

PR Close #33110
2019-10-14 16:20:11 +00:00
Kara Erickson 64fd0d6db9 refactor(core): rename ngComponentDef to ɵcmp (#33088)
Component defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.

This commit adds the prefix and shortens the name from
`ngComponentDef` to `cmp`. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.

Note that the other "defs" (ngDirectiveDef, etc) will be
prefixed and shortened in follow-up PRs, in an attempt to
limit how large and conflict-y this change is.

PR Close #33088
2019-10-11 15:45:22 -07:00
Danny Skoog 6ab5f3648a refactor: utilize type narrowing (#33075)
PR Close #33075
2019-10-10 15:18:44 -07:00
Martin Probst 5332b04f35 build: TypeScript 3.6 compatibility. (#32908)
This PR updates Angular to compile with TypeScript 3.6 while retaining
compatibility with TS3.5. We achieve this by inserting several `as any`
casts for compatiblity around `ts.CompilerHost` APIs.

PR Close #32908
2019-10-03 09:09:11 -07:00
Andrew Scott 63256b511a fix(ivy): Only restore registered modules if user compiles modules with TestBed (#32944)
There are a couple scenarios that are problematic and need special
handling:

1. A user has a custom implementation of lazy-loaded modules, sets some
provider overrides, then compiles the module so it can be loaded. In a
follow-up test, the user sets different overrides for the module and
then compiles. This is problematic because we need to be sure the module
registered in the first test is not used, so we need to clear it out of
the modules list in `ng_module_factory_registration`.
2. A user has a similar lazy-loaded module factory implementation but
relies on the module being registered automatically. This can happen,
for example, as a side effect of importing the ngfactory file.

PR Close #32944
2019-10-01 17:17:47 -07:00
Andrew Scott 475e36abb5 fix(ivy): R3TestBed should clean up registered modules after each test (#32872)
PR Close #32872
2019-09-30 15:01:08 -07:00
Andrew Scott c8be987b40 fix(ivy): ensure TestBed restores fields to the most original value (#32823)
PR Close #32823
2019-09-25 11:28:09 -07:00
Carlos Ortiz García a85eccd6ff feat(core): Deprecate TestBed.get as deprecated (#32406)
From 9.0.0 use TestBed.inject
See #32200

Fixes #26491

PR Close #32406
2019-09-11 20:28:56 -04:00
Pete Bacon Darwin fa79f51645 refactor(ivy): update the compiler to emit `$localize` tags (#31609)
This commit changes the Angular compiler (ivy-only) to generate `$localize`
tagged strings for component templates that use `i18n` attributes.

BREAKING CHANGE

Since `$localize` is a global function, it must be included in any applications
that use i18n. This is achieved by importing the `@angular/localize` package
into an appropriate bundle, where it will be executed before the renderer
needs to call `$localize`. For CLI based projects, this is best done in
the `polyfills.ts` file.

```ts
import '@angular/localize';
```

For non-CLI applications this could be added as a script to the index.html
file or another suitable script file.

PR Close #31609
2019-08-30 12:53:26 -07:00
Misko Hevery 77c382ccba feat(core): Adds DI support for `providedIn: 'platform'|'any'` (#32154)
Extend the vocabulary of the `providedIn` to also include  `'platform'` and `'any'`` scope.
```
@Injectable({
  providedId: 'platform', // tree shakable injector for platform injector
})
class MyService {...}
```

PR Close #32154
2019-08-29 21:51:56 -07:00
Carlos Ortiz García 3aba7ebe6a feat(core): Introduce TestBed.inject to replace TestBed.get (#32200)
TestBed.get is not type safe, fixing it would be a massive breaking
change. The Angular team has proposed replacing it with TestBed.inject
and deprecate TestBed.get.

Deprecation from TestBed.get will come as a separate commit.

Issue #26491
Fixes #29905

BREAKING CHANGE: Injector.get now accepts abstract classes to return
type-safe values. Previous implementation returned `any` through the
deprecated implementation.

PR Close #32200
2019-08-28 21:26:46 -07:00
atscott cfed0c0cf1 fix(ivy): Support selector-less directive as base classes (#32125)
Following #31379, this adds support for directives without a selector to
Ivy.

PR Close #32125
2019-08-20 09:56:54 -07:00
Paul Gschwendtner 2200884e55 refactor(core): ensure compatibility with typescript strict flag (#30993)
As part of FW-1265, the `@angular/core` package is made compatible
with the TypeScript `--strict` flag. This already unveiled a few bugs,
so the strictness flag seems to help with increasing the overall code health.

Read more about the strict flag [here](https://www.typescriptlang.org/docs/handbook/compiler-options.html)

PR Close #30993
2019-07-18 14:21:25 -07:00
Andrew Kushnir d545bbeee4 fix(ivy): handle ModuleWithProviders in R3TestBed correctly (#31415)
Prior to this commit, it was impossible to override providers defined via ModuleWithProviders using TestBed.overrideProvider API. The problem was caused by the fact that we were not taking into account these providers while calculating accumulated set of provider overrides. This commit updates the logic to extract providers from ModuleWithProviders and calculate the final set of overrides taking them into account.

PR Close #31415
2019-07-11 18:27:13 -04:00
cexbrayat 6bc9c78d76 fix(core): temporarily remove @deprecated jsdoc tag for a TextBedStatic.get overload (#30714)
Followup to #30514 which did the same for `TestBed`, but `TestBedStatic` was necessary too.

PR Close #30714
2019-06-14 10:40:42 -07:00
Alex Eagle 337b6fe003 build: remove unreferenced tsconfig-build.json files (#30858)
These are no longer needed since Bazel generates a tsconfig for each compilation

PR Close #30858
2019-06-05 09:03:36 -07:00
Olivier Combe 5e0f982961 feat(ivy): use i18n locale data to determine the plural form of ICU expressions (#29249)
Plural ICU expressions depend on the locale (different languages have different plural forms). Until now the locale was hard coded as `en-US`.
For compatibility reasons, if you use ivy with AOT and bootstrap your app with `bootstrapModule` then the `LOCALE_ID` token will be set automatically for ivy, which is then used to get the correct plural form.
If you use JIT, you need to define the `LOCALE_ID` provider on the module that you bootstrap.
For `TestBed` you can use either `configureTestingModule` or `overrideProvider` to define that provider.
If you don't use the compat mode and start your app with `renderComponent` you need to call `ɵsetLocaleId` manually to define the `LOCALE_ID` before bootstrap. We expect this to change once we start adding the new i18n APIs, so don't rely on this function (there's a reason why it's a private export).
PR Close #29249
2019-05-30 15:09:02 -04:00
Alex Rickabaugh deb77bd3df feat(ivy): TestBed support for reusing non-exported components (#30578)
This is a new feature of the Ivy TestBed.

A common user pattern is to test one component with another. This is
commonly done by creating a `TestFixture` component which exercises the
main component under test.

This pattern is more difficult if the component under test is declared in an
NgModule but not exported. In this case, overriding the module is necessary.

In g3 (and View Engine), it's possible to use an NgSummary to override the
recompilation of a component, and depend on its AOT compiled factory. The
way this is implemented, however, specifying a summary for a module
effectively overrides much of the TestBed's other behavior. For example, the
following is legal:

```typescript
TestBed.configureTestingModule({
  declarations: [FooCmp, TestFixture],
  imports: [FooModule],
  aotSummaries: [FooModuleNgSummary],
});
```

Here, `FooCmp` is declared in both the testing module and in the imported
`FooModule`. However, because the summary is provided, `FooCmp` is not
compiled within the context of the testing module, but _is_ made available
for `TestFixture` to use, even if it wasn't originally exported from
`FooModule`.

This pattern breaks in Ivy - because summaries are a no-op, this amounts
to a true double declaration of `FooCmp` which raises an error.

Fixing this in user code is possible, but is difficult to do in an
automated or backwards compatible way. An alternative solution is
implemented in this PR.

This PR attempts to capture the user intent of the following previously
unsupported configuration:

```typescript
TestBed.configureTestingModule({
  declarations: [FooCmp, TestFixture],
  imports: [FooModule],
});
```

Note that this is the same as the configuration above in Ivy, as the
`aotSummaries` value provided has no effect.

The user intent here is interpreted as follows:

1) `FooCmp` is a pre-existing component that's being used in the test
   (via import of `FooModule`). It may or may not be exported by this
   module.

2) `FooCmp` should be part of the testing module's scope. That is, it
   should be visible to `TestFixture`. This is because it's listed in
   `declarations`.

This feature effectively makes the `TestBed` testing module special. It's
able to declare components without compiling them, if they're already
compiled (or configured to be compiled) in the imports. And crucially, the
behavior matches the first example with the summary, making Ivy backwards
compatible with View Engine for tests that use summaries.

PR Close #30578
2019-05-24 14:01:44 -04:00
cexbrayat f6bf8928f2 fix(core): temporarily remove @deprecated jsdoc tag for a TextBed.get overload (#30514)
PR #29290 introduced a new `TestBed.get` signature and deprecated the existing one.
This raises a lot of TSLint deprecation warnings in projects using a strict TS config (see #29905 for context), so we are temporarily removing the `@deprecated` annotation in favor of a plain text warning until we properly fix it.

Refs #29905
Fixes FW-1336

PR Close #30514
2019-05-21 13:11:21 -07:00
Kara Erickson a96976e88f fix(core): remove deprecated `TestBed.deprecatedOverrideProvider` API (#30576)
BREAKING CHANGE

In PR #19558, we fixed a bug in `TestBed.overrideProvider` where
eager providers were not being instantiated correctly. However,
it turned out that since this bug had been around for quite a bit,
many apps were relying on the broken behavior where the providers
would not be instantiated. To assist in the transition, the
`TestBed.deprecatedOverrideProvider` method was temporarily
introduced to mimic the old behavior so that apps would have a
longer time period to migrate their code.

2 years and 3 versions later, it is time to remove the temporary
method. This commit removes `TestBed.deprecatedOverrideProvider`
altogether. Any usages of `TestBed.deprecatedOverrideProvider`
should be replaced with `TestBed.overrideProvider`. This may mean
that providers that were not created before will now be instantiated,
which could mean that your tests need to provide more mocks or stubs
for the dependencies of the newly instantiated providers.

PR Close #30576
2019-05-21 12:37:17 -07:00
Ben Lesh d7eaae6f22 refactor(ivy): Move instructions back to ɵɵ (#30546)
There is an encoding issue with using delta `Δ`, where the browser will attempt to detect the file encoding if the character set is not explicitly declared on a `<script/>` tag, and Chrome will find the `Δ` character and decide it is window-1252 encoding, which misinterprets the `Δ` character to be some other character that is not a valid JS identifier character

So back to the frog eyes we go.

```
    __
   /ɵɵ\
  ( -- ) - I am ineffable. I am forever.
 _/    \_
/  \  /  \
==  ==  ==
```

PR Close #30546
2019-05-20 16:37:47 -07:00
Ben Lesh cf86ed7b29 refactor(ivy): migrate ɵɵ prefix back to Δ (#30362)
Now that issues are resolved with Closure compiler, we can move back to our desired prefix of `Δ`.

PR Close #30362
2019-05-14 16:52:15 -07:00
George Kalpakas 066ec33342 fix(ivy): allow `R3TestBedCompiler` to work in ngcc-processed apps (#28530)
Previously, `R3TestBedCompiler` was dynamically defining an
`@NgModule`-decorated `CompilerModule` class inside a method call.
Since ngcc only processes top-level classes, this class was not
transformed causing failures in unit tests (see #30121 for details).

This commit fixes it by using `compileNgModuleDefs()` directly (similar
to the fix in #30037).

Fixes #30121

PR Close #28530
2019-05-01 16:38:32 -07:00
Andrew Kushnir 00ce9aab5b fix(ivy): explicitly compile ngModuleDef for RootScopeModule in R3TestBed (#30037)
This commit unifies the way auxillary RootScopeModule and DynamicTestModule are compiled in R3TestBed by calling `compileNgModuleDefs` explicitly for RootScopeModule. This change also resolves the problem where TestBed's code was used from the @angular/core NPM package: due to the "jit" flag, the @NgModule decorator on the RootScopeModule was transformed to RootScopeModule.decorators = [...], but actual ngModuleDef was never defined.

PR Close #30037
2019-04-23 08:31:42 -07:00
Andrew Kushnir f9bb53a761 fix(ivy): allow TestBed.createComponent to create components in isolation (#29981)
Prior to this change, components created via TestBed.createComponent in the same test were placed into the same root context, which caused problems in conjunction with fixture.autoDetectChanges usage in the same test. Specifically, change detection was triggered immediately for created component (starting from the 2nd one) even if it was not required/desired. This commit makes Ivy and VE behavior consistent: now every component created via TestBed.createComponent is isolated from each other. Current solution uses host element id naming convention, which is not ideal, but helps avoid public API surface changes at this point (we might revisit this approach later).

Note: this commit also adds extra tests to verify bootstrap and change detection behavior in case of multiple components in `bootstrap` array in @NgModule, to make sure this behavior is aligned between Ivy and VE.

PR Close #29981
2019-04-19 09:45:52 -07:00
Andrew Kushnir 5f1b6372c7 fix(ivy): multi provider override support in TestBed (#29919)
Overriding multi provider values (providers with `multi: true` flag) via TestBed require additional handling: all existing multi-provider values for the same token should be removed from the override list, so that they are not included into the final value of a given provider. This commit adds this logic to make sure we handle multi providers correctly.

PR Close #29919
2019-04-16 10:28:40 -07:00
Alex Rickabaugh 9147092a15 Revert "feat(ivy): use i18n locale data to determine the plural form of ICU expressions (#29249)" (#29918)
This reverts commit 6a8cca7975.

PR Close #29918
2019-04-15 16:55:51 -07:00
Olivier Combe 6a8cca7975 feat(ivy): use i18n locale data to determine the plural form of ICU expressions (#29249)
Plural ICU expressions depend on the locale (different languages have different plural forms). Until now the locale was hard coded as `en-US`.
For compatibility reasons, if you use ivy with AOT and bootstrap your app with `bootstrapModule` then the `LOCALE_ID` token will be set automatically for ivy, which is then used to get the correct plural form.
If you use JIT, you need to define the `LOCALE_ID` provider on the module that you bootstrap.
For `TestBed` you can use either `configureTestingModule` or `overrideProvider` to define that provider.
If you don't use the compat mode and start your app with `renderComponent` you need to call `ɵsetLocaleId` manually to define the `LOCALE_ID` before bootstrap. We expect this to change once we start adding the new i18n APIs, so don't rely on this function (there's a reason why it's a private export).
PR Close #29249
2019-04-15 10:40:26 -07:00
Kara Erickson 0aa0f11a2b fix(ivy): log errors instead of re-throwing them (#29853)
In order to be backwards compatible with View Engine, Ivy should log
errors by default in the TestBed error handler rather than re-throwing
them. Re-throwing the errors is a breaking change that causes issues with
libraries like ngrx that have async behavior and custom error handling.

This logging approach has issues (for both VE and Ivy) because it can allow
tests to pass inappropriately if errors are thrown inside listeners. However,
since re-throwing would be breaking and requires a larger redesign, we should
wait until post-Ivy.

PR Close #29853
2019-04-12 16:57:26 -07:00
Alex Rickabaugh b0578061ce refactor(ivy): use ɵɵ instead of Δ for now (#29850)
The `Δ` caused issue with other infrastructure, and we are temporarily
changing it to `ɵɵ`.

This commit also patches ts_api_guardian_test and AIO to understand `ɵɵ`.

PR Close #29850
2019-04-11 16:27:56 -07:00
Ben Lesh 138ca5a246 refactor(ivy): prefix all generated instructions (#29692)
- Updates all instructions to be prefixed with the Greek delta symbol

PR Close #29692
2019-04-10 12:11:40 -07:00
Carlos Ortiz García 609024f93d fix(core): Deprecate TestBed.get(...):any (#29290)
Adds an overload to TestBed.get making parameters strongly typed and
deprecated previous signature that accepted types `any`. The function
still returns `any` to prevent build breakages, but eventually stronger
type checks will be added so a future Angular version will break builds
due to additional type checks.
See previous breaking change - #13785

Issue #26491

PR Close #29290
2019-04-04 15:32:23 -07:00
Alex Rickabaugh 7b27009e20 fix(ivy): fix proliferation of provider overrides for modules (#29571)
When an @NgModule is imported more than once in the testing module (for
example it appears in the imports of more than one module, or if it's
literally listed multiple times), then TestBed had a bug where the
providers for the module would be overridden many times.

This alone was problematic but would not break tests. However, the original
value of the providers field of the ngInjectorDef was saved each time, and
restored in the same order. Thus, if the provider array was [X], and
overrides were applied twice, then the override array would become
[X, X'] and then [X, X', X, X']. However, on the second override the state
[X, X'] would be stored as original. The array would then be restored to
[X] and then [X, X'].

Each test, therefore, would continue to double the size of the providers
array for the module, eventually exhausting the browser's memory.

This commit adds a Set to track when overrides have been applied to a module
and refrain from applying them more than once.

PR Close #29571
2019-03-28 13:59:25 -07:00
Andrew Kushnir 71ec99856a fix(ivy): allow TestBed to recompile AOT-compiled components in case of template overrides (#29555)
Prior to this change, recompilation of AOT-compiled components in TestBed may fail when template override is requested. That was happening due to the `styleUrls` field defined for a Component, thus switching its state to "requires resolution" (i.e. having external resources) at compile time. This change avoids this issue by storing styles and resetting `styleUrls` field before recompilation. Once compilation is done, saved styles are patched back onto Component def.

PR Close #29555
2019-03-28 10:11:41 -07:00
Andrew Kushnir 309ffe7e16 fix(ivy): TestBed rewrite to avoid unnecessary recompilations (#29483)
Prior to this change, Ivy version of TestBed was not designed to support the logic to avoid recompilations - most of the Components/Directives/Pipes were recompiled for each test, even if there were no overrides defined for a given Type. Additional checks to avoid recompilation were introduced in one of the previous commits (0244a2433e), but there were still some corner cases that required attention. In order to support the necessary logic better, Ivy TestBed was rewritten/refactored. Main results of this rewrite are:

* no recompilation for Components/Directives/Pipes without overrides
* the logic to restore state between tests (isolate tests) was improved
* transitive scopes calculation no longer performs recompilation (it works with compiled defs)

As a result of these changes we see reduction in memory consumption (3.5-4x improvement) and pefromance increase (4-4.5x improvement).

PR Close #29483
2019-03-27 09:41:58 -07:00
JiaLiPassion 17f7bdbd60 build: update zone.js to 0.9.0 (#28219)
The API changes are due to enabling strict checks in TypeScript (via `strict: true`).
The payload size changes in `polyfills.js` are due to more browser APIs being patched in recent versions (e.g. `fetch`, `customElement v1`).

PR Close #28219
2019-03-26 12:50:38 -07:00
Kristiyan Kostadinov bef5043a5a fix(ivy): TestBed overriding custom ErrorHandler (#29482)
Fixes TestBed's default ErrorHandler overriding the one provided by the consumer via an `import`.

This PR resolves FW-1193.

PR Close #29482
2019-03-22 16:45:33 -07:00