With View engine it was possible to declare multiple projection
definitions and to programmatically project nodes into the slots.
e.g.
```html
<ng-content></ng-content>
<ng-content></ng-content>
```
Using `ViewContainerRef#createComponent` allowed projecting
nodes into one of the projection defs (through index)
This no longer works with Ivy as the `projectionDef` instruction only
retrieves a list of selectors instead of also retrieving entries for
reserved projection slots which appear when using the default
selector multiple times (as seen above).
In order to fix this issue, the Ivy compiler now passes all
projection slots to the `projectionDef` instruction. Meaning that
there can be multiple projection slots with the same wildcard
selector. This allows multi-slot projection as seen in the
example above, and it also allows us to match the multi-slot node
projection order from View Engine (to avoid breaking changes).
It basically ensures that Ivy fully matches the View Engine behavior
except of a very small edge case that has already been discussed
in FW-886 (with the conclusion of working as intended).
Read more here: https://hackmd.io/s/Sy2kQlgTE
PR Close#30561
Currently with Ivy, `ModuleWithProvider` providers are processed in order
of declaration in the `NgModule` imports. This technically makes makes
sense but is a potential breaking change as `ModuleWithProvider` providers
are processed after all imported modules in View Engine.
In order to keep the behavior of View Engine, the `r3_injector` is updated
to no longer process `ModuleWithProvider` providers egarly.
Resolves FW-1349
PR Close#30688
Two issues with DebugNode/DebugElement in Ivy were causing problems in user
tests.
1. The DebugNodes returned by Ivy were not actually instances of DebugNode.
This was due to an issue with the Ivy switch logic in debug_node.ts.
The declaration of the exported DebugNode reference was set to
`DebugNode__PRE_R3__ as any`. The cast prevented the Ivy switch transform
from detecting this as a switchable declaration. The transform cannot handle
arbitrary syntax, and exports *must* be of the form "const x = y__PRE_R3__;"
or they will not work. The cast to any in this case was not needed, so this
commit removes it.
2. DebugNodes returned by Ivy multiple times for the same element were not
reference-identical. This was previously considered a minor breaking change
in Ivy, but testing has shown that users depend on referential equality of
DebugNodes. This commit caches a DebugNode on a DOM node when first creating
it, to allow returning the same instance in subsequent operations.
PR Close#30756
Due to sanitization being stored as a temp/global value between
instructions, unit tests randomly failed because one test failed
to clean up its temporary value. This patch fixes this issue.
Changed runtime i18n to define attributes with bindings, or matching directive inputs/outputs as element properties as we are supposed to do in Angular.
This PR fixes the issue where directive inputs wouldn't be trigged.
FW-1315 #resolve
PR Close#30402
Commit 0df719a46 introduced registration of NgModules with ids when compiled
with AOT, and f74373f2d corrected the timing to avoid issues with tree
shaking. Neither of these approaches were correct.
This commit fixes the timing to match View Engine and avoid tree shaking
issues, as well as fixes a bug with the registration of imported module ids.
A new Ivy-only test is added which verifies that modules get registered
correctly under real-world conditions.
PR Close#30706
Plural ICU expressions depend on the locale (different languages have different plural forms). Until now the locale was hard coded as `en-US`.
For compatibility reasons, if you use ivy with AOT and bootstrap your app with `bootstrapModule` then the `LOCALE_ID` token will be set automatically for ivy, which is then used to get the correct plural form.
If you use JIT, you need to define the `LOCALE_ID` provider on the module that you bootstrap.
For `TestBed` you can use either `configureTestingModule` or `overrideProvider` to define that provider.
If you don't use the compat mode and start your app with `renderComponent` you need to call `ɵsetLocaleId` manually to define the `LOCALE_ID` before bootstrap. We expect this to change once we start adding the new i18n APIs, so don't rely on this function (there's a reason why it's a private export).
PR Close#29249
This patch is one of the final patches to refactor the styling algorithm
to be more efficient, performant and less complex.
This patch enables sanitization support for map-based and prop-based
style bindings.
PR Close#30667
This fixes a collision between #30639 and #30543 where the latter added
usages of @ViewChild without the static flag present, but the former
made the flag required.
PR Close#30666
This commit makes the static flag on @ViewChild and @ContentChild required.
BREAKING CHANGE:
In Angular version 8, it's required that all @ViewChild and @ContentChild
queries have a 'static' flag specifying whether the query is 'static' or
'dynamic'. The compiler previously sorted queries automatically, but in
8.0 developers are required to explicitly specify which behavior is wanted.
This is a temporary requirement as part of a migration; see
https://angular.io/guide/static-query-migration for more details.
@ViewChildren and @ContentChildren queries are always dynamic, and so are
unaffected.
PR Close#30639
This patch in the second runtime change which refactors how styling
bindings work in Angular. This patch refactors how map-based
`[style]` and `[class]` bindings work using a new algorithm which
is faster and less complex than the former one.
This patch is a follow-up to an earlier refactor which enabled
support for prop-based `[style.name]` and `[class.name]`
bindings (see f03475cac8).
PR Close#30543
This is a new feature of the Ivy TestBed.
A common user pattern is to test one component with another. This is
commonly done by creating a `TestFixture` component which exercises the
main component under test.
This pattern is more difficult if the component under test is declared in an
NgModule but not exported. In this case, overriding the module is necessary.
In g3 (and View Engine), it's possible to use an NgSummary to override the
recompilation of a component, and depend on its AOT compiled factory. The
way this is implemented, however, specifying a summary for a module
effectively overrides much of the TestBed's other behavior. For example, the
following is legal:
```typescript
TestBed.configureTestingModule({
declarations: [FooCmp, TestFixture],
imports: [FooModule],
aotSummaries: [FooModuleNgSummary],
});
```
Here, `FooCmp` is declared in both the testing module and in the imported
`FooModule`. However, because the summary is provided, `FooCmp` is not
compiled within the context of the testing module, but _is_ made available
for `TestFixture` to use, even if it wasn't originally exported from
`FooModule`.
This pattern breaks in Ivy - because summaries are a no-op, this amounts
to a true double declaration of `FooCmp` which raises an error.
Fixing this in user code is possible, but is difficult to do in an
automated or backwards compatible way. An alternative solution is
implemented in this PR.
This PR attempts to capture the user intent of the following previously
unsupported configuration:
```typescript
TestBed.configureTestingModule({
declarations: [FooCmp, TestFixture],
imports: [FooModule],
});
```
Note that this is the same as the configuration above in Ivy, as the
`aotSummaries` value provided has no effect.
The user intent here is interpreted as follows:
1) `FooCmp` is a pre-existing component that's being used in the test
(via import of `FooModule`). It may or may not be exported by this
module.
2) `FooCmp` should be part of the testing module's scope. That is, it
should be visible to `TestFixture`. This is because it's listed in
`declarations`.
This feature effectively makes the `TestBed` testing module special. It's
able to declare components without compiling them, if they're already
compiled (or configured to be compiled) in the imports. And crucially, the
behavior matches the first example with the summary, making Ivy backwards
compatible with View Engine for tests that use summaries.
PR Close#30578
Depending on which placeholders the translation uses, there are some legitimate cases where we might not use all placeholder replacements in `i18nPostprocess`. For example if some of the placeholders of the original messages have been removed in the translation.
FW-1312 #resolve
PR Close#30632
Prior to this change a component was considered unresolved (i.e. having dynamic resources that should be loaded, like external template or stylesheets) even if template override was provided as an empty string (for example, via TestBed.overrideTemplateUsingTestingModule call). This commit fixes the condition that previously treated empty string as an absent template value.
PR Close#30602
With Ivy, injecting a `ViewContainerRef` for a `<ng-container>` element
results in two comments generated in the DOM. One comment as host
element for the `ElementContainer` and one for the generated `LContainer`
which is needed for the created `ViewContainerRef`.
This is problematic as developers expect the same anchor element for
the `LContainer` and the `ElementContainer` in order to be able to move
the host element of `<ng-container>` without leaving the actual
`LContainer` anchor element at the original location.
This worked differently in View Engine and various applications might
depend on the behavior where the `ViewContainerRef` shares the anchor
comment node with the host comment node of the `<ng-container>`. For
example `CdkTable` from `@angular/cdk` moves around the host element of
a `<ng-container>` and also expects embedded views to be inserted next
to the moved `<ng-container>` host element.
See: f8be5329f8/src/cdk/table/table.ts (L999-L1016)
Resolves FW-1341
PR Close#30611
Prior to this change we processed binding expression (including bindings with pipes) in i18n attributes before we generate update instruction. As a result, slot offsets for pipeBind instructions were calculated incorrectly. Now we perform binding expression processing when we generate "update block" instructions, so offsets are calculated correctly.
PR Close#30573
There is an encoding issue with using delta `Δ`, where the browser will attempt to detect the file encoding if the character set is not explicitly declared on a `<script/>` tag, and Chrome will find the `Δ` character and decide it is window-1252 encoding, which misinterprets the `Δ` character to be some other character that is not a valid JS identifier character
So back to the frog eyes we go.
```
__
/ɵɵ\
( -- ) - I am ineffable. I am forever.
_/ \_
/ \ / \
== == ==
```
PR Close#30546
Moves all manual render3 view_container_ref tests that use property
bindings to acceptance tests with TestBed.
Two issues surfaced and refer to a difference between Ivy and View
engine:
* Multi-slot projection is not working with Ivy: FW-1331
* ViewContainerRef throws if index is invalid while View Engine clamped index: FW-1330
PR Close#30488
This is the first refactor PR designed to change how styling bindings
(i.e. `[style]` and `[class]`) behave in Ivy. Instead of having a heavy
element-by-element context be generated for each element, this new
refactor aims to use a single context for each `tNode` element that is
examined and iterated over when styling values are to be applied to the
element.
This patch brings this new functionality to prop-based bindings such as
`[style.prop]` and `[class.name]`.
PR Close#30469
Moves most of the tests from `render3/integration_spec` into `acceptance`. Note that there are still a handful of tests left in render3, because we don't have a way of moving all of them to go through `TestBed` since they either have r3-specific assertions or we don't have access to the same APIs as the raw instructions.
PR Close#30461
Ports render3 onDestroy tests over to be acceptance tests. Removes old render3 tests if possible.
Note the onlyInIvy test for one area where Ivy has a different behavior than ViewEngine
PR Close#30445
- Adds inheritance tests for many combinations of directive, component and bare class inheritance
- Adds tests that are failing in ivy, but should work, marks them with `xit` and a TODO.
- Removes render3 unit tests that cover the same things.
PR Close#30442
In View Engine, we would simply ignore host style bindings on template nodes. In Ivy,
we are throwing a "Cannot read length of undefined" error instead. For backwards
compatibility, we should also ignore these bindings rather than blowing up.
PR Close#30498
In View engine it is possible to instantiate a service that that has no
`@Injectable` decorator as long as it satisfies one of:
1) It has no dependencies and so a constructor with no parameters.
This is already supported in Ivy.
2) It has no constructor of its own and sub-classes a service which has
dependencies but has its own `@Injectable` decorator. This second
scenario was broken in Ivy.
In Ivy, previous to this commit, if a class to be instantiated did not have
its own `@Injectable` decorator and did not provide a constructor of
its own, then it would be created using `new` with no arguments -
i.e. falling back to the first scenario.
After this commit Ivy correctly uses the `ngInjectableDef` inherited
from the super-class to provide the `factory` for instantiating the
sub-class.
FW-1314
PR Close#30388
- Moves template ref tests from render3 unit tests to acceptance tests.
- Marks tests testing ivy specific changes as `onlyInIvy`.
- Deletes old render3 unit tests that are no longer necessary
PR Close#30443
Preserve compatibility with rollup_bundle rule.
Add missing npm dependencies, which are now enforced by the strict_deps plugin in tsc_wrapped
PR Close#30370
Moves most of the r3 change detection tests into `acceptance`. Notes:
* A handful of tests weren't migrated, because they were testing an API that isn't exposed publicly yet.
* The `should throw if bindings in children of current view have changed` and `should NOT throw if bindings in ancestors of current view have changed` tests were removed, because there's not nice way of hitting the same code path with `TestBed` and doing the same assertion as with the raw instructions. I'm open to ideas on how we could do them.
* There were a few tests that assert that the `innerHTML` looks in a particular way. I've switched them to use `textContent`, because Ivy and ViewEngine produce slightly different DOM. The tests were only checking whether the text has changed anyway.
PR Close#30425
Moves all manual render3 property binding tests to
TestBed acceptance tests. Unfortunately three property
binding tests could not be migrated as these rely on
manual Ivy template code that is not supported within
TestBed. These can be revisited as discussed in the
framework team meeting.
PR Close#30426
Moves all manual render3 tests which are located within the
`renderer_factory_spec.ts` file to acceptance tests. A few tests
that use Ivy-specific logic which is not replicable with `TestBed`
remain in the render3 folder (e.g. using `renderTemplate`)
Additionally migrated tests that assert the lifecycles of the
renderer_factory are set to *ivy only* as the lifecycle seems
to be different in Ivy. Tracked with: FW-1320
PR Close#30435
Currently in Ivy `NgModule` registration happens when the class is declared, however this is inconsistent with ViewEngine and requires extra generated code. These changes remove the generated code for `registerModuleFactory`, pass the id through to the `ngModuleDef` and do the module registration inside `NgModuleFactory.create`.
This PR resolves FW-1285.
PR Close#30244
- Moves tests related to the pureFunction instructions from render3 to acceptance tests
- Leaves behind one test for in-template javascript that is not supported syntax yet
PR Close#30406
Moves over the tests from `pipe_spec` into `acceptance`. Note that the two `WrappedValue` tests haven't been moved over, because impure pipes always throw "changed after checked" errors in `TestBed`. This seems to be consistent with ViewEngine.
PR Close#30389
Moves most of the tests in `output_spec` into `acceptance`. Note that one test is left in `render3`, because it's testing mixing in custom logic with instructions which we can't replicate using `TestBed`.
PR Close#30372
Moves all manual `render3` content projection tests that use
the `ɵɵelementProperty` to acceptance tests. Additionally a
few other content projection tests were moved over to
acceptance. Eventually we'll be able to move all remaining
content projection tests to acceptance.
PR Close#30357
This commit moves the delegated constructor detection to a helper
function and also adds more test coverage.
The original code for this came from https://github.com/angular/angular/pull/24156
thanks to @ts2do.
Closes#24156Closes#27267
// FW-1310
PR Close#30368
Even though we don't run the size-tracking test on CI
right now, we update the golden size map as part of
the size-tracking tool update. The size-map difference
should generally be kept up-to-date to be able to
determine which PRs contribute size to a given file.
PR Close#30257
Based on discussion that happened on the PR that introduced
the size-tracking tool, we want to have another threshold for
the raw byte difference. This allows us to better control for
which changes the size-tracking tool should report a difference.
See: https://github.com/angular/angular/pull/30070#discussion_r278332315
PR Close#30257
- splits existing property acceptance tests into property_binding and property_interpolation
- ports tests from render3 instructions tests to acceptance tests
- removes redundant or unnecessary tests that are covered by existing acceptance tests
:)
PR Close#30321
We have an issue where we would like to be able to test perf counter metrics in acceptance tests, but we are unable to do so, because it will break when those same tests are run with ViewEngine. This PR adds a testing utility to `onlyInIvy` that allows for testing of performance counters, and even gives readable errors for what value on `ngDevMode` is incorrect. Has typings for decent autocompletion as well.
PR Close#30339
This is the final patch to migrate the Angular styling code to have a
smaller instruction set in preparation for the runtime refactor. All
styling-related instructions now work both in template and hostBindings
functions and do not use `element` as a prefix for their names:
BEFORE:
elementStyling()
elementStyleProp()
elementClassProp()
elementStyleMap()
elementClassMap()
elementStylingApply()
AFTER:
styling()
styleProp()
classProp()
styleMap()
classMap()
stylingApply()
PR Close#30318
This patch removes all host-specific styling instructions in favor of
using element-level instructions instead. Because of the previous
patches that made sure `select(n)` worked between styling calls, all
host level instructions are not needed anymore. This patch changes each
of those instruction calls to use any of the `elementStyling*`,
`elementStyle*` and `elementClass*` styling instructions instead.
PR Close#30336
Fixes not being able to bind a `SafeStyle` as a camel cased style property (e.g. `[style.backgroundImage]="someSafeStyle"`). The issue was due to the fact that we only check the dash case property names to determine whether to sanitize a value.
This PR resolves FW-1279.
PR Close#30328
This patch is one commit of many patches that will unify all styling instructions
across both template-level bindings and host-level bindings. This patch in particular
removes the `elementIndex` param because it is already set prior to each styling
instruction via the `select(n)` instruction.
PR Close#30313
This patch breaks up the existing `elementStylingMap` into
`elementClassMap` and `elementStyleMap` instructions. It also breaks
apart `hostStlyingMap` into `hostClassMap` and `hostStyleMap`
instructions. This change allows for better tree-shaking and reduces
the complexity of the styling algorithm code for `[style]` and `[class]`
bindings.
PR Close#30293
This commit fixes a regression introduced in PR 29692 where
the interpolate symbol in View Engine was improperly prefixed
with the ɵɵ that signifies private instructions for Ivy. It
resulted in interpolations of 10+ values not working correctly
in AOT mode. This commit removes the prefix.
PR Close#30243
Ivy uses R3Injector, but we are currently pulling in both the StaticInjector
(View Engine injector) and the R3Injector when running with Ivy. This commit
adds an ivy switch so calling Injector.create() pulls in the correct
implementation of the injector depending on whether you are using VE or Ivy.
This saves us about 3KB in the bundle.
PR Close#30219
Previously, we were supporting injection flags for provider deps, but only
if they fit the format `new Optional()`. This commit fixes resolution of
provider deps to also support `Optional` (without the new). This keeps us
backwards compatible with what View Engine supported.
PR Close#30216
Stores the views that are part of a container directly on the `LContainer`, rather than maintaining a dedicated sub-array.
This PR resolves FW-1288.
PR Close#30179
Currently, we are not properly resolving forward refs when they appear
in deps for providers created with the useFactory strategy. This commit
wraps provider deps in the resolveForwardRef call so the tokens are
passed into the inject function as expected.
PR Close#30201
Fixes `HostBinding` and `HostListener` declarations not being inherited from base classes that don't have an Angular decorator.
This PR resolves FW-1275.
PR Close#30158
Introduces a new Bazel test that allows us to inspect
what source-files contribute to a given bundled file
and how much bytes they contribute to the bundle size.
Additionally the size-tracking rule groups the size
data by directories. This allows us to compare size
changes in the scope of directories. e.g. a lot of
files in a directory could increase slightly in size, but
in the directory scope the size change could be significant
and needs to be reported by the test target.
Resolves FW-1278
PR Close#30070
Fixes Ivy reflecting properties with `undefined` values, rather than omitting them. Also fixes that Ivy doesn't clear the reflected values when property value changes from something that is defined to undefined.
This PR resolves FW-1277.
PR Close#30103
Move tests for special tokens like `Injector`, `ElementRef`, `TemplateRef`, `ViewContainerRef`, `ChangeDectetorRef` and custom string tokens.
PR Close#29299
- Extracts and documents code that will be common to interpolation instructions
- Ensures that binding indices are updated at the proper time during compilation
- Adds additional tests
Related #30011
PR Close#30129
The `renderStringify` function is used in a lot of performance-sensitive places, however it contains a megamorphic read which is used primarily for error messages. These changes introduce a new function that can be used to stringify output for errors and removes the megamorphic read from `renderStringify`.
This PR resolves FW-1286.
PR Close#30082
Fixes view and content queries not being inherited in Ivy, if the base class hasn't been annotated with an Angular decorator (e.g. `Component` or `Directive`).
Also reworks the way the `ngBaseDef` is created so that it is added at the same point as the queries, rather than inside of the `Input` and `Output` decorators.
This PR partially resolves FW-1275. Support for host bindings will be added in a follow-up, because this PR is somewhat large as it is.
PR Close#30015
Fixes Ivy throwing an error because it tries to generate styling instructions for empty `style` and `class` bindings.
This PR resolves FW-1274.
PR Close#30024
Previously, we had a bug where directive matching could fail if the directive
attribute was bound and followed a certain number of classes. This is because
in the matching logic, we were treating classes like normal attributes. We
should instead be skipping classes in the attribute matching logic. Otherwise
classes will match for directives with attribute selectors, and as we are
iterating through them in twos (when they are stored as name-only, not in
name-value pairs), it may throw off directive matching for any bound attributes
that come after. This commit changes the directive matching logic to skip
classes altogether.
PR Close#30002
Paul Gschwendtner
Alex Rickabaugh
Matias Niemelä
Olivier Combe
Ben Lesh
Kara Erickson
Misko Hevery
Andrew Kushnir
Pawel Kozlowski
Kristiyan Kostadinov
Filipe Silva
Pete Bacon Darwin
cexbrayat
Alex Eagle
Marc Laval
Martin Mädler