Added a new syntax for projections (`¤` will represent `ng-content` nodes) so that we can treat them specifically.
When we enter an i18n block with the instruction `i18nStart`, a new `delayProjection` variable is set to true to prevent the instruction `projection` from projecting the nodes. Once we reach the `i18nEnd` instruction and encounter a projection in the translation we will project its nodes.
If a projection was removed from a translation, then its nodes won't be projected at all.
The variable `delayProjection` is restored to `false` at the end of `i18nEnd` so that it doesn't stop projections outside of i18n blocks.
FW-1261 #resolve
PR Close#30782
We used to ignore empty strings for optimization purposes, but it turns out that empty strings are also valid values for ICU cases and we shouldn't ignore those.
FW-1290 #resolve
PR Close#30846
Projecting bare ICU expressions failed because we would assume that component's content nodes would be projected later and doing so at that point would be wasteful. But ICU nodes are handled independently and should be inserted immediately because they will be ignored by projections.
FW-1348 #resolve
PR Close#30696
With View engine it was possible to declare multiple projection
definitions and to programmatically project nodes into the slots.
e.g.
```html
<ng-content></ng-content>
<ng-content></ng-content>
```
Using `ViewContainerRef#createComponent` allowed projecting
nodes into one of the projection defs (through index)
This no longer works with Ivy as the `projectionDef` instruction only
retrieves a list of selectors instead of also retrieving entries for
reserved projection slots which appear when using the default
selector multiple times (as seen above).
In order to fix this issue, the Ivy compiler now passes all
projection slots to the `projectionDef` instruction. Meaning that
there can be multiple projection slots with the same wildcard
selector. This allows multi-slot projection as seen in the
example above, and it also allows us to match the multi-slot node
projection order from View Engine (to avoid breaking changes).
It basically ensures that Ivy fully matches the View Engine behavior
except of a very small edge case that has already been discussed
in FW-886 (with the conclusion of working as intended).
Read more here: https://hackmd.io/s/Sy2kQlgTE
PR Close#30561
Currently with Ivy, `ModuleWithProvider` providers are processed in order
of declaration in the `NgModule` imports. This technically makes makes
sense but is a potential breaking change as `ModuleWithProvider` providers
are processed after all imported modules in View Engine.
In order to keep the behavior of View Engine, the `r3_injector` is updated
to no longer process `ModuleWithProvider` providers egarly.
Resolves FW-1349
PR Close#30688
Due to sanitization being stored as a temp/global value between
instructions, unit tests randomly failed because one test failed
to clean up its temporary value. This patch fixes this issue.
Changed runtime i18n to define attributes with bindings, or matching directive inputs/outputs as element properties as we are supposed to do in Angular.
This PR fixes the issue where directive inputs wouldn't be trigged.
FW-1315 #resolve
PR Close#30402
Plural ICU expressions depend on the locale (different languages have different plural forms). Until now the locale was hard coded as `en-US`.
For compatibility reasons, if you use ivy with AOT and bootstrap your app with `bootstrapModule` then the `LOCALE_ID` token will be set automatically for ivy, which is then used to get the correct plural form.
If you use JIT, you need to define the `LOCALE_ID` provider on the module that you bootstrap.
For `TestBed` you can use either `configureTestingModule` or `overrideProvider` to define that provider.
If you don't use the compat mode and start your app with `renderComponent` you need to call `ɵsetLocaleId` manually to define the `LOCALE_ID` before bootstrap. We expect this to change once we start adding the new i18n APIs, so don't rely on this function (there's a reason why it's a private export).
PR Close#29249
This patch is one of the final patches to refactor the styling algorithm
to be more efficient, performant and less complex.
This patch enables sanitization support for map-based and prop-based
style bindings.
PR Close#30667
This fixes a collision between #30639 and #30543 where the latter added
usages of @ViewChild without the static flag present, but the former
made the flag required.
PR Close#30666
This patch in the second runtime change which refactors how styling
bindings work in Angular. This patch refactors how map-based
`[style]` and `[class]` bindings work using a new algorithm which
is faster and less complex than the former one.
This patch is a follow-up to an earlier refactor which enabled
support for prop-based `[style.name]` and `[class.name]`
bindings (see f03475cac8).
PR Close#30543
Depending on which placeholders the translation uses, there are some legitimate cases where we might not use all placeholder replacements in `i18nPostprocess`. For example if some of the placeholders of the original messages have been removed in the translation.
FW-1312 #resolve
PR Close#30632
With Ivy, injecting a `ViewContainerRef` for a `<ng-container>` element
results in two comments generated in the DOM. One comment as host
element for the `ElementContainer` and one for the generated `LContainer`
which is needed for the created `ViewContainerRef`.
This is problematic as developers expect the same anchor element for
the `LContainer` and the `ElementContainer` in order to be able to move
the host element of `<ng-container>` without leaving the actual
`LContainer` anchor element at the original location.
This worked differently in View Engine and various applications might
depend on the behavior where the `ViewContainerRef` shares the anchor
comment node with the host comment node of the `<ng-container>`. For
example `CdkTable` from `@angular/cdk` moves around the host element of
a `<ng-container>` and also expects embedded views to be inserted next
to the moved `<ng-container>` host element.
See: f8be5329f8/src/cdk/table/table.ts (L999-L1016)
Resolves FW-1341
PR Close#30611
Prior to this change we processed binding expression (including bindings with pipes) in i18n attributes before we generate update instruction. As a result, slot offsets for pipeBind instructions were calculated incorrectly. Now we perform binding expression processing when we generate "update block" instructions, so offsets are calculated correctly.
PR Close#30573
Moves all manual render3 view_container_ref tests that use property
bindings to acceptance tests with TestBed.
Two issues surfaced and refer to a difference between Ivy and View
engine:
* Multi-slot projection is not working with Ivy: FW-1331
* ViewContainerRef throws if index is invalid while View Engine clamped index: FW-1330
PR Close#30488
This is the first refactor PR designed to change how styling bindings
(i.e. `[style]` and `[class]`) behave in Ivy. Instead of having a heavy
element-by-element context be generated for each element, this new
refactor aims to use a single context for each `tNode` element that is
examined and iterated over when styling values are to be applied to the
element.
This patch brings this new functionality to prop-based bindings such as
`[style.prop]` and `[class.name]`.
PR Close#30469
Moves most of the tests from `render3/integration_spec` into `acceptance`. Note that there are still a handful of tests left in render3, because we don't have a way of moving all of them to go through `TestBed` since they either have r3-specific assertions or we don't have access to the same APIs as the raw instructions.
PR Close#30461
Ports render3 onDestroy tests over to be acceptance tests. Removes old render3 tests if possible.
Note the onlyInIvy test for one area where Ivy has a different behavior than ViewEngine
PR Close#30445
- Adds inheritance tests for many combinations of directive, component and bare class inheritance
- Adds tests that are failing in ivy, but should work, marks them with `xit` and a TODO.
- Removes render3 unit tests that cover the same things.
PR Close#30442
In View Engine, we would simply ignore host style bindings on template nodes. In Ivy,
we are throwing a "Cannot read length of undefined" error instead. For backwards
compatibility, we should also ignore these bindings rather than blowing up.
PR Close#30498
In View engine it is possible to instantiate a service that that has no
`@Injectable` decorator as long as it satisfies one of:
1) It has no dependencies and so a constructor with no parameters.
This is already supported in Ivy.
2) It has no constructor of its own and sub-classes a service which has
dependencies but has its own `@Injectable` decorator. This second
scenario was broken in Ivy.
In Ivy, previous to this commit, if a class to be instantiated did not have
its own `@Injectable` decorator and did not provide a constructor of
its own, then it would be created using `new` with no arguments -
i.e. falling back to the first scenario.
After this commit Ivy correctly uses the `ngInjectableDef` inherited
from the super-class to provide the `factory` for instantiating the
sub-class.
FW-1314
PR Close#30388
- Moves template ref tests from render3 unit tests to acceptance tests.
- Marks tests testing ivy specific changes as `onlyInIvy`.
- Deletes old render3 unit tests that are no longer necessary
PR Close#30443
Preserve compatibility with rollup_bundle rule.
Add missing npm dependencies, which are now enforced by the strict_deps plugin in tsc_wrapped
PR Close#30370
Moves most of the r3 change detection tests into `acceptance`. Notes:
* A handful of tests weren't migrated, because they were testing an API that isn't exposed publicly yet.
* The `should throw if bindings in children of current view have changed` and `should NOT throw if bindings in ancestors of current view have changed` tests were removed, because there's not nice way of hitting the same code path with `TestBed` and doing the same assertion as with the raw instructions. I'm open to ideas on how we could do them.
* There were a few tests that assert that the `innerHTML` looks in a particular way. I've switched them to use `textContent`, because Ivy and ViewEngine produce slightly different DOM. The tests were only checking whether the text has changed anyway.
PR Close#30425
Moves all manual render3 property binding tests to
TestBed acceptance tests. Unfortunately three property
binding tests could not be migrated as these rely on
manual Ivy template code that is not supported within
TestBed. These can be revisited as discussed in the
framework team meeting.
PR Close#30426
Moves all manual render3 tests which are located within the
`renderer_factory_spec.ts` file to acceptance tests. A few tests
that use Ivy-specific logic which is not replicable with `TestBed`
remain in the render3 folder (e.g. using `renderTemplate`)
Additionally migrated tests that assert the lifecycles of the
renderer_factory are set to *ivy only* as the lifecycle seems
to be different in Ivy. Tracked with: FW-1320
PR Close#30435
- Moves tests related to the pureFunction instructions from render3 to acceptance tests
- Leaves behind one test for in-template javascript that is not supported syntax yet
PR Close#30406
Moves over the tests from `pipe_spec` into `acceptance`. Note that the two `WrappedValue` tests haven't been moved over, because impure pipes always throw "changed after checked" errors in `TestBed`. This seems to be consistent with ViewEngine.
PR Close#30389
Moves most of the tests in `output_spec` into `acceptance`. Note that one test is left in `render3`, because it's testing mixing in custom logic with instructions which we can't replicate using `TestBed`.
PR Close#30372
Moves all manual `render3` content projection tests that use
the `ɵɵelementProperty` to acceptance tests. Additionally a
few other content projection tests were moved over to
acceptance. Eventually we'll be able to move all remaining
content projection tests to acceptance.
PR Close#30357
- splits existing property acceptance tests into property_binding and property_interpolation
- ports tests from render3 instructions tests to acceptance tests
- removes redundant or unnecessary tests that are covered by existing acceptance tests
:)
PR Close#30321
We have an issue where we would like to be able to test perf counter metrics in acceptance tests, but we are unable to do so, because it will break when those same tests are run with ViewEngine. This PR adds a testing utility to `onlyInIvy` that allows for testing of performance counters, and even gives readable errors for what value on `ngDevMode` is incorrect. Has typings for decent autocompletion as well.
PR Close#30339
Fixes not being able to bind a `SafeStyle` as a camel cased style property (e.g. `[style.backgroundImage]="someSafeStyle"`). The issue was due to the fact that we only check the dash case property names to determine whether to sanitize a value.
This PR resolves FW-1279.
PR Close#30328
This commit fixes a regression introduced in PR 29692 where
the interpolate symbol in View Engine was improperly prefixed
with the ɵɵ that signifies private instructions for Ivy. It
resulted in interpolations of 10+ values not working correctly
in AOT mode. This commit removes the prefix.
PR Close#30243
Previously, we were supporting injection flags for provider deps, but only
if they fit the format `new Optional()`. This commit fixes resolution of
provider deps to also support `Optional` (without the new). This keeps us
backwards compatible with what View Engine supported.
PR Close#30216
Currently, we are not properly resolving forward refs when they appear
in deps for providers created with the useFactory strategy. This commit
wraps provider deps in the resolveForwardRef call so the tokens are
passed into the inject function as expected.
PR Close#30201
Fixes `HostBinding` and `HostListener` declarations not being inherited from base classes that don't have an Angular decorator.
This PR resolves FW-1275.
PR Close#30158
Move tests for special tokens like `Injector`, `ElementRef`, `TemplateRef`, `ViewContainerRef`, `ChangeDectetorRef` and custom string tokens.
PR Close#29299
- Extracts and documents code that will be common to interpolation instructions
- Ensures that binding indices are updated at the proper time during compilation
- Adds additional tests
Related #30011
PR Close#30129
Fixes view and content queries not being inherited in Ivy, if the base class hasn't been annotated with an Angular decorator (e.g. `Component` or `Directive`).
Also reworks the way the `ngBaseDef` is created so that it is added at the same point as the queries, rather than inside of the `Input` and `Output` decorators.
This PR partially resolves FW-1275. Support for host bindings will be added in a follow-up, because this PR is somewhat large as it is.
PR Close#30015
Fixes Ivy throwing an error because it tries to generate styling instructions for empty `style` and `class` bindings.
This PR resolves FW-1274.
PR Close#30024
Previously, we had a bug where directive matching could fail if the directive
attribute was bound and followed a certain number of classes. This is because
in the matching logic, we were treating classes like normal attributes. We
should instead be skipping classes in the attribute matching logic. Otherwise
classes will match for directives with attribute selectors, and as we are
iterating through them in twos (when they are stored as name-only, not in
name-value pairs), it may throw off directive matching for any bound attributes
that come after. This commit changes the directive matching logic to skip
classes altogether.
PR Close#30002
Previous to this change, we assumed embedded views could only be created after
their parent template node had completed processing. As a result, we only set
up query logic for containers after directives on the node were created.
However, this assumption didn't take into account the case where a directive
on a template node could create views in its constructor.
This commit fixes query logic to work with views created in constructors.
In that case, we need to create a query container before the new view is
rendered so query results in the view aren't lost. But since the query container
is created before directives have completed processing, we also have to ensure
that query results gathered later on the template node are inserted before that
query container. Otherwise, query results in embedded views will clobber query
results on template nodes.
This splice mode may be slightly slower than the normal matching for queries on
containers, but we should only fall back to this strategy in the edge case where
views are created in constructors. (We should encourage developers to create
views in ngOnInit instead).
PR Close#29983
The `TNode.cleanup` data structure can contain sequences of 4-element
sequence of entries (event handlers, directive outputs) mixed with
2-element sequence of entries (QueryList cleanup). Before this fix
we would always skip 4 elements in the `TNode.cleanup` while looking
up event handler cleanups. 4-element skips are not correct in case
of query cleanup presence and this commit corrects the algorithm to
jump 4 or 2 elements depending on a type of cleanup encountered.
PR Close#29957
If a component has its definition set by defineComponent (as opposed to
JIT getter), then it will generate a factory that uses directiveInject()
to retrieve its dependencies. This can be problematic in test code because
tests could use the injection utility before bootstrapping the component,
and directiveInject() relies on the view having been created.
This commit tweaks directiveInject() to fall back to inject() if the view
has not been created. This will allow injection to work in tests even if
it is called before the component is bootstrapped.
PR Close#29948
Previous to this commit, providing a component or directive in a test
module without @Injectable() would throw because the injectable factory
would not be found. Providing components in tests in addition to declaring
or importing them is not necessary, but it should not throw an error.
This commit ensures factory data is saved when component defs and directive
defs are created, which allows them to be processed by the module injector.
Note that bootstrapping is still required for this setup to work because
directiveInject() does not support cases where the view has not been
created. This case will be handled in a future commit.
PR Close#29945
We had a bug where event.preventDefault() was not always called if listeners
were coalesced. This is because we were overwriting the previous listener's
result every time we called the next listener, so listeners early in the chain
that returned false would be ignored and preventDefault would not be called.
This commit fixes that issue, so now preventDefault() is called if any listener
in a coalesced chain returns false. This brings us in line with View Engine
behavior.
PR Close#29934
Prior to this change, element attributes annotated with i18n- prefix were removed from element attribute list and processed separately by i18n-specific logic. This behavior is causing issues with directive matching, since attributes are not present in the list of attrs for matching purposes. This commit updates i18n logic to retain attributes in the main attribute list, thus allowing directive matching logic to work correctly.
PR Close#29856
So far using runtime i18n with ivy meant that you needed to use Closure and `goog.getMsg` (or a polyfill). This PR changes the compiler to output both closure & non-closure code, while the unused option will be tree-shaken by minifiers.
This means that if you use the Angular CLI with ivy and load a translations file, you can use i18n and the application will not throw at runtime.
For now it will not translate your application, but at least you can try ivy without having to remove all of your i18n code and configuration.
PR Close#28689
Currently in Ivy we pass both the raw and parsed selectors to the projectionDef instruction, because the parsed selectors are used to match most nodes, whereas the raw ones are used to match against nodes with the ngProjectAs attribute. The raw selectors add a fair bit of code that won't be used in most cases, because ngProjectAs is somewhat rare.
These changes rework the compiler not to output the raw selectors in the projectionDef, but to parse the selector in ngProjectAs and to store it on the TAttributes. The logic for matching has also been changed so that it matches the pre-parsed ngProjectAs selector against the list of projection selectors.
PR Close#29578
Fixes the creation mode block not being run on components which have been detached from change detection.
This PR resolves FW-1217.
Fixes#29645.
PR Close#29741
The new styling algorithm in angular is designed to evaluate host
bindings stylinh priority in order of directive evaluation order. This,
however, does not work with respect to parent/sub-class directives
because sub-class host bindings are run after the parent host bindings
but still have priority. This patch ensures that the host styling bindings
for parent and sub-class components/directives are executed with respect
to the styling algorithm prioritization.
Jira Issue: FW-1132
PR Close#29602
In View Engine, we used to generate empty QueryLists for content queries on root
components (though we did not actually support populating these lists). We need
to keep this behavior in Ivy for backwards compatibility. Otherwise, components
that are sometimes used as root will fail if they are relying on content query
results to always be defined.
PR Close#29514
Angular Ivy interprets inline static style/class attribute values as instructions that
are processed whilst an element gets created. Because these inline style values are
referenced by style/class bindings, their inline style values are applied at a later
stage. Despite them being eventually applied, their values should be applied earlier
before any directives are instantiated so that directive code can rely on any inline
style/class changes.
This patch ensures that all static style/class attribute values are applied (rendered)
on the element before directives are instantiated.
Jira Issue: FW-1133
PR Close#29269
When injecting with `@Attribute`, namespaced attributes should not match (in order to have feature parity with View Engine).
This PR resolves FW-1137
PR Close#29257
BREAKING CHANGE:
Certain elements (like `<tr>` or `<col>`) require parent elements to be of a certain type by the HTML specification
(ex. <tr> can only be inside <tbody> / <thead>). Before this change Angular template parser was auto-correcting
"invalid" HTML using the following rules:
- `<tr>` would be wrapped in `<tbody>` if not inside `<tbody>`, `<tfoot>` or `<thead>`;
- `<col>` would be wrapped in `<colgroup>` if not inside `<colgroup>`.
This meachanism of automatic wrapping / auto-correcting was problematic for several reasons:
- it is non-obvious and arbitrary (ex. there are more HTML elements that has rules for parent type);
- it is incorrect for cases where `<tr>` / `<col>` are at the root of a component's content, ex.:
```html
<projecting-tr-inside-tbody>
<tr>...</tr>
</projecting-tr-inside-tbody>
```
In the above example the `<projecting-tr-inside-tbody>` component culd be "surprised" to see additional
`<tbody>` elements inserted by Angular HTML parser.
PR Close#29219
Some tests in exports spec rely on the exact output of innerHTML. In IE11 the order of attributes might change, thus causing tests to fail (in case an element contains more than one attribute). This commit avoids innerHTML usage and performs the necessary checks via element properties.
PR Close#29127
Some of the export tests had assertions that relied on capitalization
of attributes in the DOM. IE treats capitalization somewhat differently,
so our SauceLabs tests were failing.
This commit tweaks the tests so that the assertions do not rely on
attributes to be capitalized or not.
PR Close#29125
Angular supports having a component extend off of a parent component.
When this happens, all annotation-level data is inherited including styles
and classes. Up until now, Ivy only paid attention to static styling
values on the parent component and not the child component. This patch
ensures that both the parent's component and child component's styling
data is merged and rendered accordingly.
Jira Issue: FW-1081
PR Close#29015
Currently we only reset the `Attached` flag of a view if it is detached through its parent, however this means that if a root view is destroyed, its flag will never be reset. This manifested itself in one of the Material tests where we were destroying the root view.
This PR resolves FW-1130.
PR Close#29064
Currently if a user accidentally calls ViewContainerRef.insert() with
a view that has already been attached, we do not clean up the references
properly, so we create a view tree with a cycle. This causes an infinite
loop when the view is destroyed.
This PR ensures that we fall back to ViewContainerRef.move() behavior
if we try to insert a view that is already attached. This fixes the
cycle and honors the user intention.
PR Close#29047
Currently if an embedded view contains projected nodes, its `rootNodes` array will include `null` instead of the root nodes inside the projection slot. This manifested itself in one of the Material unit tests where we stamp out a template and then move its `rootNodes` into the overlay container.
This PR is related to FW-1087.
PR Close#28951
Fixes the `ngOnDestroy` hook on a component or directive being called twice, if the type is also registered as a provider.
This PR resolves FW-1010.
PR Close#28470
This commit adds support for the `static: true` flag in `ContentChild`
queries. Prior to this commit, all `ContentChild` queries were resolved
after change detection ran. This is a problem for backwards
compatibility because View Engine also supported "static" queries which
would resolve before change detection.
Now if users add a `static: true` option, the query will be resolved in
creation mode (before change detection runs). For example:
```ts
@ContentChild(TemplateRef, {static: true}) template !: TemplateRef;
```
This feature will come in handy for components that need
to create components dynamically.
PR Close#28811
This commit adds support for the `static: true` flag in
`ViewChild` queries. Prior to this commit, all `ViewChild`
queries were resolved after change detection ran. This is
a problem for backwards compatibility because View Engine
also supported "static" queries which would resolve before
change detection.
Now if users add a `static: true` option, the query will be
resolved in creation mode (before change detection runs).
For example:
```ts
@ViewChild(TemplateRef, {static: true}) template !: TemplateRef;
```
This feature will come in handy for components that need
to create components dynamically.
PR Close#28811
Prior to this commit, the timing of `ViewChild`/`ContentChild` query
resolution depended on the results of each query. If any results
for a particular query were nested inside embedded views (e.g.
*ngIfs), that query would be resolved after change detection ran.
Otherwise, the query would be resolved as soon as nodes were created.
This inconsistency in resolution timing had the potential to cause
confusion because query results would sometimes be available in
ngOnInit, but sometimes wouldn't be available until ngAfterContentInit
or ngAfterViewInit. Code depending on a query result could suddenly
stop working as soon as an *ngIf or an *ngFor was added to the template.
With this commit, users can dictate when they want a particular
`ViewChild` or `ContentChild` query to be resolved with the `static`
flag. For example, one can mark a particular query as `static: false`
to ensure change detection always runs before its results are set:
```ts
@ContentChild('foo', {static: false}) foo !: ElementRef;
```
This means that even if there isn't a query result wrapped in an
*ngIf or an *ngFor now, adding one to the template later won't change
the timing of the query resolution and potentially break your component.
Similarly, if you know that your query needs to be resolved earlier
(e.g. you need results in an ngOnInit hook), you can mark it as
`static: true`.
```ts
@ViewChild(TemplateRef, {static: true}) foo !: TemplateRef;
```
Note: this means that your component will not support *ngIf results.
If you do not supply a `static` option when creating your `ViewChild` or
`ContentChild` query, the default query resolution timing will kick in.
Note: This new option only applies to `ViewChild` and `ContentChild`
queries, not `ViewChildren` or `ContentChildren` queries, as those types
already resolve after CD runs.
PR Close#28810
Prior to this fix if a root component was instantiated it create host
bindings, but never render them once update mode ran unless one or more
slot-allocated bindings were issued. Since styling in Ivy does not make
use of LView slots, the host bindings function never ran on the root
component.
This fix ensures that the `hostBindings` function does run for a root
component and also renders the schedlued styling instructions when
executed.
Jira Issue: FW-1062
PR Close#28664
While marking a given views tree as dirty we should go all the way to the
root of the views tree and cross boundaries of dynamically inserted views.
In other words the markForCheck functionality should consider parents of
dynamically inserted views.
PR Close#28687
Prior to this change we used current injector implementation for module injector, which was causing problems and produces circular dependencies in case the same token is referenced (with @SkipSelf flag) in the `deps` array. The origin of the problem was that once `directiveInject` implementation becomes active, it was used for module injector as well, thus searching deps in Component/Directive DI scope. This fix sets `injectInjectorOnly` implementation for module injector to resolve the problem.
PR Close#28667
Previously, using a pipe in an input binding on an ng-template would
evaluate the pipe in the context of node that was processed before the
template. This caused the retrieval of e.g. ChangeDetectorRef to be
incorrect, resulting in one of the following bugs depending on the
template's structure:
1. If the template was at the root of a view, the previously processed
node would be the component's host node outside of the current view.
Accessing that node in the context of the current view results in a crash.
2. For templates not at the root, the ChangeDetectorRef injected into the
pipe would correspond with the previously processed node. If that node
hosts a component, the ChangeDetectorRef would not correspond with the
view that the ng-template is part of.
The solution to the above problem is two-fold:
1. Template compilation is adjusted such that the template instruction
is emitted before any instructions produced by input bindings, such as
pipes. This ensures that pipes are evaluated in the context of the
template's container node.
2. A ChangeDetectorRef can be requested for container nodes.
Fixes#28587
PR Close#27565
Before this fix our ViewRef implementation assumed that checkNoChanges can be
only called on component views. In reality checkNoChanges can be also called on
embedded views (ex.: when an embedded view is attached to ApplicationRef).
PR Close#28644
Previously, it wasn't possible to compile template that contains pipe in context of ternary operator `{{ 1 ? 2 : 0 | myPipe }}` due to the error `Error: Illegal state: Pipes should have been converted into functions. Pipe: async`.
This PR fixes a typo in expression parser so that pipes are correctly converted into functions.
PR Close#28635
Prior to this change in Ivy we had strict check that disabled non-unique #localRefs usage within a given template. While this limitation was technically present in View Engine, in many cases View Engine neglected this restriction and as a result, some apps relied on a fact that multiple non-unique #localRefs can be defined and utilized to query elements via @ViewChild(ren) and @ContentChild(ren). In order to provide better compatibility with View Engine, this commit removes existing restriction.
As a part of this commit, are few tests were added to verify VE and Ivy compatibility in most common use-cases where multiple non-unique #localRefs were used.
PR Close#28627
Prior to this change we only checked whether current lView has a next pointer while traversing tNode tree. However in some cases this pointer can be undefined and we need to look up parents chain to find suitable next pointer. This commit adds the logic of searching for the next pointer taking parents chain into account.
PR Close#28533
When we first started writing tests for Ivy, we did not yet have a
compatible compiler. For this reason, we set up the Ivy runtime tests
to run with generated code that we wrote by hand (instead of real code
generated by the compiler).
Now that we have a working Ivy compiler and TestBed infrastructure
that is compatible with Ivy, we should start writing integration
tests that leverage them (no more handwritten generated code!). This
will prevent bugs where the compiler code and runtime code become
out of sync (which is easy if they are tested separately). And
eventually, we should migrate all the existing runtime tests in
"core/test/render3" to TestBed and ngtsc.
To kick off this effort, this commit migrates some existing tests
from "core/test/render3/exports_spec.ts" and saves them in a new file
with the same name in the "core/test/acceptance" folder.
PR Close#28534
Olivier Combe
Miško Hevery
Paul Gschwendtner
Matias Niemelä
Ben Lesh
Alex Rickabaugh
Kara Erickson
Andrew Kushnir
Kristiyan Kostadinov
Pete Bacon Darwin
cexbrayat
Alex Eagle
Marc Laval
Pawel Kozlowski
Greg Magolan
JoostK
Alexey Zuev