Commit Graph

915 Commits

Author SHA1 Message Date
Matias Niemelä 53dbff66d7 revert: refactor(ivy): remove styling state storage and introduce direct style writing (#32259)
This reverts commit 15aeab1620.
2019-09-11 15:24:10 -07:00
Matias Niemelä 15aeab1620 refactor(ivy): remove styling state storage and introduce direct style writing (#32259) (#32596)
This patch is a final major refactor in styling Angular.

This PR includes three main fixes:

All temporary state taht is persisted between template style/class application
and style/class application in host bindings is now removed.
Removes the styling() and stylingApply() instructions.
Introduces a "direct apply" mode that is used apply prop-based
style/class in the event that there are no map-based bindings as
well as property collisions.

PR Close #32259

PR Close #32596
2019-09-11 16:27:10 -04:00
Matias Niemelä c84c27f7f4 revert: refactor(ivy): remove styling state storage and introduce direct style writing (#32259) 2019-09-10 18:08:05 -04:00
Matias Niemelä 3b37469735 refactor(ivy): remove styling state storage and introduce direct style writing (#32259)
This patch is a final major refactor in styling Angular.

This PR includes three main fixes:

All temporary state taht is persisted between template style/class application
and style/class application in host bindings is now removed.
Removes the styling() and stylingApply() instructions.
Introduces a "direct apply" mode that is used apply prop-based
style/class in the event that there are no map-based bindings as
well as property collisions.

PR Close #32259
2019-09-10 15:54:58 -04:00
crisbeto 664e0015d4 perf(ivy): replace select instruction with advance (#32516)
Replaces the `select` instruction with a new one called `advance`. Instead of the jumping to a specific index, the new instruction goes forward X amount of elements. The advantage of doing this is that it should generate code the compresses better.

PR Close #32516
2019-09-10 06:30:28 -04:00
Pete Bacon Darwin c024d89448 refactor(ivy): remove `i18nLocalize` instruction (#31609)
This has been replaced by the `$localize` tag.

PR Close #31609
2019-08-30 12:53:26 -07:00
Misko Hevery 1537791f06 perf(core): Make `PlatformLocation` tree-shakable (#32154)
Convert `PlatformLocation` into a tree-shakable provider.

PR Close #32154
2019-08-29 21:51:56 -07:00
Misko Hevery 77c382ccba feat(core): Adds DI support for `providedIn: 'platform'|'any'` (#32154)
Extend the vocabulary of the `providedIn` to also include  `'platform'` and `'any'`` scope.
```
@Injectable({
  providedId: 'platform', // tree shakable injector for platform injector
})
class MyService {...}
```

PR Close #32154
2019-08-29 21:51:56 -07:00
Pawel Kozlowski 5635505f2e refactor(ivy): remove unused ɵɵtextBinding instruction (#32345)
PR Close #32345
2019-08-28 21:37:15 -07:00
Carlos Ortiz García 3aba7ebe6a feat(core): Introduce TestBed.inject to replace TestBed.get (#32200)
TestBed.get is not type safe, fixing it would be a massive breaking
change. The Angular team has proposed replacing it with TestBed.inject
and deprecate TestBed.get.

Deprecation from TestBed.get will come as a separate commit.

Issue #26491
Fixes #29905

BREAKING CHANGE: Injector.get now accepts abstract classes to return
type-safe values. Previous implementation returned `any` through the
deprecated implementation.

PR Close #32200
2019-08-28 21:26:46 -07:00
Pawel Kozlowski a1e91b00d2 perf(ivy): remove renderStringify calls for text nodes creation (#32342)
Values passed to the `ɵɵtext` instruction are strings (or undefined)
in the generated code so no need to stringify those again.

PR Close #32342
2019-08-28 17:12:38 -07:00
Kristiyan Kostadinov c885178d5f refactor(ivy): move directive, component and pipe factories to ngFactoryFn (#31953)
Reworks the compiler to output the factories for directives, components and pipes under a new static field called `ngFactoryFn`, instead of the usual `factory` property in their respective defs. This should eventually allow us to inject any kind of decorated class (e.g. a pipe).

**Note:** these changes are the first part of the refactor and they don't include injectables. I decided to leave injectables for a follow-up PR, because there's some more cases we need to handle when it comes to their factories. Furthermore, directives, components and pipes make up most of the compiler output tests that need to be refactored and it'll make follow-up PRs easier to review if the tests are cleaned up now.

This is part of the larger refactor for FW-1468.

PR Close #31953
2019-08-27 13:57:00 -07:00
Kara Erickson de8ebbdfd0 feat(ivy): make Hammer support tree-shakable (#32203)
Currently, it's not possible to tree-shake away the
coordination layer between HammerJS and Angular's
EventManager. This means that you get the HammerJS
support code in your production bundle whether or
not you actually use the library.

This commit removes the Hammer providers from the
default platform_browser providers list and instead
provides them as part of a `HammerModule`. Apps on
Ivy just need to import the `HammerModule` at root
to turn on Hammer support. Otherwise all Hammer code
will tree-shake away. View Engine apps will require
no change.

BREAKING CHANGE

Previously, in Ivy applications, Hammer providers
were included by default. With this commit, apps
that want Hammer support must import `HammerModule`
in their root module.

PR Close #32203
2019-08-21 11:43:51 -07:00
Miško Hevery 2e4d17f3a9 perf(core): make sanitization tree-shakable in Ivy mode (#31934)
In VE the `Sanitizer` is always available in `BrowserModule` because the VE retrieves it using injection.

In Ivy the injection is optional and we have instructions instead of component definition arrays. The implication of this is that in Ivy the instructions can pull in the sanitizer only when they are working with a property which is known to be unsafe. Because the Injection is optional this works even if no Sanitizer is present. So in Ivy we first use the sanitizer which is pulled in by the instruction, unless one is available through the `Injector` then we use that one instead.

This PR does few things:
1) It makes `Sanitizer` optional in Ivy.
2) It makes `DomSanitizer` tree shakable.
3) It aligns the semantics of Ivy `Sanitizer` with that of the Ivy sanitization rules.
4) It refactors `DomSanitizer` to use same functions as Ivy sanitization for consistency.

PR Close #31934
2019-08-15 10:30:12 -07:00
Alex Rickabaugh 4055150910 feat(compiler): allow selector-less directives as base classes (#31379)
In Angular today, the following pattern works:

```typescript
export class BaseDir {
  constructor(@Inject(ViewContainerRef) protected vcr: ViewContainerRef) {}
}

@Directive({
  selector: '[child]',
})
export class ChildDir extends BaseDir {
  // constructor inherited from BaseDir
}
```

A decorated child class can inherit a constructor from an undecorated base
class, so long as the base class has metadata of its own (for JIT mode).
This pattern works regardless of metadata in AOT.

In Angular Ivy, this pattern does not work: without the @Directive
annotation identifying the base class as a directive, information about its
constructor parameters will not be captured by the Ivy compiler. This is a
result of Ivy's locality principle, which is the basis behind a number of
compilation optimizations.

As a solution, @Directive() without a selector will be interpreted as a
"directive base class" annotation. Such a directive cannot be declared in an
NgModule, but can be inherited from. To implement this, a few changes are
made to the ngc compiler:

* the error for a selector-less directive is now generated when an NgModule
  declaring it is processed, not when the directive itself is processed.
* selector-less directives are not tracked along with other directives in
  the compiler, preventing other errors (like their absence in an NgModule)
  from being generated from them.

PR Close #31379
2019-08-14 12:03:05 -07:00
cexbrayat 628b0c1154 feat(forms): formControlName also accepts a number (#30606)
This commit relaxes the type of the `formControlName` input to accept both a `string` and a `number`.

Currently, when using a `FormArray`, most templates look like:

```
<div formArrayName="tags">
  <div *ngFor="let tag of tagsArray.controls; index as i">
    <input [formControlName]="i">
  </div>
</div>
```

Here `formControlName` receives a number whereas its input type is a string.

This is fine for VE and `fullTemplateTypeCheck`, but not for Ivy which does a more thorough type checking on inputs with `fullTemplateTypeCheck` enabled and throws `Type 'number' is not assignable to type 'string'`. It is fixable by using `formControlName="{{i}}"` but you have to know the difference between `a="{{b}}"` and `[a]="b"` and change it all over the application codebase. This commit allows the existing code to still type-check.

PR Close #30606
2019-08-13 14:21:25 -07:00
Kristiyan Kostadinov 914900a561 refactor(ivy): remove load instruction (#32067)
These changes remove the `ɵɵload` instruction which isn't being generated anymore.

PR Close #32067
2019-08-12 12:55:18 -07:00
Kristiyan Kostadinov 4ea3e7e000 refactor(ivy): combine query load instructions (#32100)
Combines the `loadViewQuery` and `loadContentQuery` instructions since they have the exact same internal logic. Based on a discussion here: https://github.com/angular/angular/pull/32067#pullrequestreview-273001730

PR Close #32100
2019-08-12 10:32:08 -07:00
Kara Erickson 37de490e23 Revert "feat(compiler): allow selector-less directives as base classes (#31379)" (#32089)
This reverts commit f90c7a9df0 due to breakages in G3.

PR Close #32089
2019-08-09 18:20:53 -07:00
Kara Erickson 9a37e827e2 Revert "feat(forms): formControlName also accepts a number (#30606)" (#32088)
This reverts commit a647298412.

PR Close #32088
2019-08-09 17:29:27 -07:00
Alex Rickabaugh f90c7a9df0 feat(compiler): allow selector-less directives as base classes (#31379)
In Angular today, the following pattern works:

```typescript
export class BaseDir {
  constructor(@Inject(ViewContainerRef) protected vcr: ViewContainerRef) {}
}

@Directive({
  selector: '[child]',
})
export class ChildDir extends BaseDir {
  // constructor inherited from BaseDir
}
```

A decorated child class can inherit a constructor from an undecorated base
class, so long as the base class has metadata of its own (for JIT mode).
This pattern works regardless of metadata in AOT.

In Angular Ivy, this pattern does not work: without the @Directive
annotation identifying the base class as a directive, information about its
constructor parameters will not be captured by the Ivy compiler. This is a
result of Ivy's locality principle, which is the basis behind a number of
compilation optimizations.

As a solution, @Directive() without a selector will be interpreted as a
"directive base class" annotation. Such a directive cannot be declared in an
NgModule, but can be inherited from. To implement this, a few changes are
made to the ngc compiler:

* the error for a selector-less directive is now generated when an NgModule
  declaring it is processed, not when the directive itself is processed.
* selector-less directives are not tracked along with other directives in
  the compiler, preventing other errors (like their absence in an NgModule)
  from being generated from them.

PR Close #31379
2019-08-09 10:45:22 -07:00
cexbrayat a647298412 feat(forms): formControlName also accepts a number (#30606)
This commit relaxes the type of the `formControlName` input to accept both a `string` and a `number`.

Currently, when using a `FormArray`, most templates look like:

```
<div formArrayName="tags">
  <div *ngFor="let tag of tagsArray.controls; index as i">
    <input [formControlName]="i">
  </div>
</div>
```

Here `formControlName` receives a number whereas its input type is a string.

This is fine for VE and `fullTemplateTypeCheck`, but not for Ivy which does a more thorough type checking on inputs with `fullTemplateTypeCheck` enabled and throws `Type 'number' is not assignable to type 'string'`. It is fixable by using `formControlName="{{i}}"` but you have to know the difference between `a="{{b}}"` and `[a]="b"` and change it all over the application codebase. This commit allows the existing code to still type-check.

PR Close #30606
2019-08-09 10:39:22 -07:00
Igor Minar 6ece7db37a build: TypeScript 3.5 upgrade (#31615)
https://github.com/Microsoft/TypeScript/wiki/Breaking-Changes#typescript-35

PR Close #31615
2019-07-25 17:05:23 -07:00
crisbeto 3d7303efc0 perf(ivy): avoid extra parameter in query instructions (#31667)
Currently we always generate the `read` parameter for the view and content query instructions, however since most of the time the `read` parameter won't be set, we'll end up generating `null` which adds 5 bytes for each query when minified. These changes make it so that the `read` parameter only gets generated if it has a value.

PR Close #31667
2019-07-24 14:37:51 -07:00
crisbeto 0aff4a6919 fix(ivy): incorrect ChangeDetectorRef injected into pipes used in component inputs (#31438)
When injecting a `ChangeDetectorRef` into a pipe, the expected result is that the ref will be tied to the component in which the pipe is being used. This works for most cases, however when a pipe is used inside a property binding of a component (see test case as an example), the current `TNode` is pointing to component's host so we end up injecting the inner component's view. These changes fix the issue by only looking up the component view of the `TNode` if the `TNode` is a parent.

This PR resolves FW-1419.

PR Close #31438
2019-07-23 15:46:23 -07:00
Matias Niemelä f50dede8f7 refactor(ivy): remove all old styling code prior to refactor (#31193)
In the previous patch () all the existing styling code was turned
off in favor of using the new refactored ivy styling code. This
patch is a follow up patch to that and removes all old, unused
styling code from the render3 directory.

PR Close #31193
2019-07-23 15:45:32 -07:00
Pawel Kozlowski d52ae7cbab perf(ivy): match query results on the TView level (#31489)
PR Close #31489
2019-07-19 20:38:08 -07:00
Matias Niemelä 9c954ebc62 refactor(ivy): make styling instructions use the new styling algorithm (#30742)
This commit is the final patch of the ivy styling algorithm refactor.
This patch swaps functionality from the old styling mechanism to the
new refactored code by changing the instruction code the compiler
generates and by pointing the runtime instruction code to the new
styling algorithm.

PR Close #30742
2019-07-19 16:40:40 -07:00
Paul Gschwendtner 10a1e1974b fix(platform-browser): debug element query predicates not compatible with strictFunctionTypes (#30993)
Currently developers can use the `By` class to construct common
`DebugElement` query predicates. e.g. `By.directive(MyDirective)`.

The `directive()` and `all()` predicates are currently returning
a predicate that works for `DebugElement` nodes. This return type
is too strict since the predicate is not specific to `DebugElement`
instances and can also apply to `DebugNode` instances.

Meaning that developers are currently able to use the `directive()`
predicate when using `queryAllNodes()`. This is a common practice
but will break when the project is compiled with TypeScript's
`--strictFunctionTypes` flag as the `DebugElement` predicate type
is not assignable to predicates for `DebugNode`. In order to make
these predicates usable with `--strictFuntionTypes` enabled, we
adjust the predicate type to reflect what is actually needed for
evaluation of the predicate.

PR Close #30993
2019-07-18 14:21:26 -07:00
Paul Gschwendtner 2200884e55 refactor(core): ensure compatibility with typescript strict flag (#30993)
As part of FW-1265, the `@angular/core` package is made compatible
with the TypeScript `--strict` flag. This already unveiled a few bugs,
so the strictness flag seems to help with increasing the overall code health.

Read more about the strict flag [here](https://www.typescriptlang.org/docs/handbook/compiler-options.html)

PR Close #30993
2019-07-18 14:21:25 -07:00
Judy Bogart 1e9eeafa9e docs: clean up router api doc (#31476)
PR Close #31476
2019-07-18 10:33:17 -07:00
crisbeto 40d785f0a0 perf(ivy): avoid generating extra parameters for host property bindings (#31550)
Currently we reuse the same instruction both for regular property bindings and property bindings on the `host`. The only difference between the two is that when it's on the host we shouldn't support inputs. We have an optional parameter called `nativeOnly` which is used to differentiate the two, however since `nativeOnly` is preceeded by another optional parameter (`sanitizer`), we have to generate two extra parameters for each host property bindings every time (e.g. `property('someProp', 'someValue', null, true)`).

These changes add a new instruction called `hostProperty` which avoids the need for the two parameters by removing `nativeOnly` which is always set and it allows us to omit `sanitizer` when it isn't being used.

These changes also remove the `nativeOnly` parameter from the `updateSyntheticHostBinding` instruction, because it's only generated for host elements which means that we can assume that its value will always be `true`.

PR Close #31550
2019-07-16 13:01:42 -04:00
crisbeto ef44f51d58 refactor(ivy): remove instruction usage from other instructions (#31456)
Removes direct calls from one instruction into another, moves the shared logic into a separate function and removes the state getters from the shared function.

This PR resolves FW-1340.

PR Close #31456
2019-07-11 15:10:20 -04:00
crisbeto 23e0d65471 perf(ivy): add self-closing elementContainer instruction (#31444)
Adds a new `elementContainer` instruction that can be used to avoid two instruction (`elementContainerStart` and `elementContainerEnd`) for `ng-container` that has text-only content. This is particularly useful when we have `ng-container` inside i18n sections.

This PR resolves FW-1105.

PR Close #31444
2019-07-09 13:50:28 -07:00
George Kalpakas 35f8bfce8b fix(core): export provider interfaces that are part of the public API types (#31377)
Some of the provider interfaces that the [Provider][1] and
[StaticProvider][2] types comprise were not exported from
[@angular/core][3]. As a result, the docs for these symbols did not
appear on angular.io (even though both `Provider` and `StaticProvider`
are part of the public API. (See, also,
https://github.com/angular/angular/pull/31377#discussion_r299254408.)

This commit fixes it by exporting all necessary provider interfaces.

[1]: https://github.com/angular/angular/blob/9e34670b2/packages/core/src/di/interface/provider.ts#L365-L366
[2]: https://github.com/angular/angular/blob/9e34670b2/packages/core/src/di/interface/provider.ts#L283-L284
[3]: https://github.com/angular/angular/blob/9e34670b2/packages/core/src/di/index.ts#L23

PR Close #31377
2019-07-08 09:51:59 -07:00
crisbeto e30f494a39 refactor(ivy): remove interpolation instructions (#31395)
Makes the `interpolateX` instructions internal-only and removes their use of global state.

This PR resolves FW-1387.

PR Close #31395
2019-07-08 09:34:13 -07:00
crisbeto 02491a6ce8 refactor(ivy): move classMap interpolation logic internally (#31211)
Adds the new `classMapInterpolate1` through `classMapInterpolate8` instructions which handle interpolations inside the `class` attribute and moves the interpolation logic internally. This allows us to remove the `interpolationX` instructions in a follow-up PR.

These changes also add an error if an interpolation is encountered inside a `style` tag (e.g. `style="width: {{value}}"`). Up until now this would actually generate valid instructions, because `styleMap` goes through the same code path as `classMap` which does support interpolation. At runtime, however, `styleMap` would set invalid styles that look like `<div style="0:w;1:i;2:d;3:t;4:h;5::;7:1;">`. In `ViewEngine` interpolations inside `style` weren't supported either, however there we'd output invalid styles like `<div style="unsafe">`, even if the content was trusted.

PR Close #31211
2019-07-02 11:07:14 -07:00
crisbeto 81332150aa perf(ivy): chain host binding instructions (#31296)
Adds chaining to the `property`, `attribute` and `updateSyntheticHostBinding` instructions when they're used in a host binding.

This PR resolves FW-1404.

PR Close #31296
2019-06-28 09:26:20 -07:00
Olivier Combe ef9cb6a034 perf(ivy): chain multiple `i18nExp` calls (#31258)
Implement function chaining for `i18nExp` to reduce the output size.

FW-1391 #resolve
PR Close #31258
2019-06-25 11:26:29 -07:00
crisbeto 23c017121e perf(ivy): chain multiple attribute instructions (#31152)
Similarly to what we did in #31078, these changes implement chaining for the `attribute` instruction.

This PR resolves FW-1390.

PR Close #31152
2019-06-24 12:33:49 -07:00
Judy Bogart a9502886b1 docs: mark interfaces as public (#30955)
PR Close #30955
2019-06-21 10:21:13 -07:00
Olivier Combe 7ff628f8d5 refactor(ivy): make `bind` an internal-only function (#31131)
The function `bind` has been internalized wherever it was needed, this PR makes sure that it is no longer publicly exported.

FW-1385 #resolve
PR Close #31131
2019-06-20 17:20:56 -07:00
Pete Bacon Darwin 3fb78aaacc feat(upgrade): provide unit test helpers for wiring up injectors (#16848)
Adds two new helper functions that can be used when unit testing Angular services
that depend upon upgraded AngularJS services, or vice versa.
The functions return a module (AngularJS or NgModule) that is configured to wire up
the Angular and AngularJS injectors without the need to actually bootstrap a full
hybrid application.

This makes it simpler and faster to unit test services.

PR Close #16848
2019-06-20 17:04:01 -07:00
Olivier Combe 87168acf39 refactor(ivy): move `bind` instruction into `i18nExp` (#31089)
i18nExp now uses `bind` internally rather than having the compiler generate it in order to bring it in line with other functions like `textBinding` & `property`.

FW-1384 #resolve
PR Close #31089
2019-06-18 09:49:27 -07:00
Ben Lesh 16aa6ceff8 refactor(ivy): update ɵɵtextBinding to not take index (#30792)
- Splits core functionality off into a shared internal function
- ɵɵtextBinding will no longer require an index
- Alters the compiler to stop generating an index argument for the instruction
- Updates tests
- Updates some usage of ɵɵtextBinding in i18n to use the helper function instead

PR Close #30792
2019-06-14 12:22:11 -07:00
cexbrayat 6bc9c78d76 fix(core): temporarily remove @deprecated jsdoc tag for a TextBedStatic.get overload (#30714)
Followup to #30514 which did the same for `TestBed`, but `TestBedStatic` was necessary too.

PR Close #30714
2019-06-14 10:40:42 -07:00
Alex Rickabaugh 0ee09cdd7e refactor(ivy): fix type of factory functions to allow explicit types (#30855)
Factory functions written by the compiler optionally allow an explicit type
to be passed. If called with this type, an instance of the given type will
be created instead of the type for which the factory was generated. This is
used to power inheritance of Angular types, as if the constructor of a class
is inherited from its superclass, then the factory function of the
superclass must be used (it has all the DI info) to construct an instance of
the derived class.

This commit adjusts typings in a few places to allow factory functions to be
called with this extra type parameter.

PR Close #30855
2019-06-11 14:27:17 -07:00
Alex Rickabaugh a4b4f35533 feat(ivy): require 'token' for ngInjectableDef (#30855)
The compiler generates a 'token' field when it emits an ngInjectableDef,
but this field was not required by defineInjectable or the InjectableDef
interface, nor was it added by InjectionToken.

This commit makes 'token' required and adds it where missing.

PR Close #30855
2019-06-11 14:27:16 -07:00
Santosh Yadav 5c18f23788 fix(common): expose the `HttpUploadProgressEvent` interface as public API (#30852)
Fixes #30814

PR Close #30852
2019-06-07 08:47:47 -07:00
Ben Lesh 3859bcc70c refactor(ivy): remove ɵɵelementAttribute instruction (#30640)
PR Close #30640
2019-06-05 21:29:38 -07:00
Ben Lesh d1df0a94d4 refactor(ivy): remove ɵɵelementProperty instruction (#30645)
- Removes ɵɵelementProperty instruction
- Updates tests that were using it
- NOTE: There is one test under `render3/integration_spec.ts` that is commented out, and needs to be reviewed. Basically, I could not find a good why to test what it was doing, because it was doing things that I am not sure we could generate in an acceptance test.

PR Close #30645
2019-06-05 09:04:43 -07:00
Misko Hevery fcdd784667 refactor(core): cleanup code with side-effects which was preventing tree-shaking (#30580)
PR Close #30580
2019-06-03 09:01:51 -07:00
Ben Lesh b4e68025f8 refactor(ivy): add ɵɵupdateSyntheticHostBinding command (#30670)
- Refactors `ɵɵcomponentHostSyntheticProperty` into `ɵɵupdateSyntheticHostBinding`, to better align it with other new instructions.

PR Close #30670
2019-06-03 09:00:13 -07:00
Paul Gschwendtner aca339e864 fix(ivy): unable to project into multiple slots with default selector (#30561)
With View engine it was possible to declare multiple projection
definitions and to programmatically project nodes into the slots.

e.g.

```html
<ng-content></ng-content>
<ng-content></ng-content>
```

Using `ViewContainerRef#createComponent` allowed projecting
nodes into one of the projection defs (through index)

This no longer works with Ivy as the `projectionDef` instruction only
retrieves a list of selectors instead of also retrieving entries for
reserved projection slots which appear when using the default
selector multiple times (as seen above).

In order to fix this issue, the Ivy compiler now passes all
projection slots to the `projectionDef` instruction. Meaning that
there can be multiple projection slots with the same wildcard
selector. This allows multi-slot projection as seen in the
example above, and it also allows us to match the multi-slot node
projection order from View Engine (to avoid breaking changes).

It basically ensures that Ivy fully matches the View Engine behavior
except of a very small edge case that has already been discussed
in FW-886 (with the conclusion of working as intended).

Read more here: https://hackmd.io/s/Sy2kQlgTE

PR Close #30561
2019-05-31 09:52:32 -07:00
Olivier Combe 5e0f982961 feat(ivy): use i18n locale data to determine the plural form of ICU expressions (#29249)
Plural ICU expressions depend on the locale (different languages have different plural forms). Until now the locale was hard coded as `en-US`.
For compatibility reasons, if you use ivy with AOT and bootstrap your app with `bootstrapModule` then the `LOCALE_ID` token will be set automatically for ivy, which is then used to get the correct plural form.
If you use JIT, you need to define the `LOCALE_ID` provider on the module that you bootstrap.
For `TestBed` you can use either `configureTestingModule` or `overrideProvider` to define that provider.
If you don't use the compat mode and start your app with `renderComponent` you need to call `ɵsetLocaleId` manually to define the `LOCALE_ID` before bootstrap. We expect this to change once we start adding the new i18n APIs, so don't rely on this function (there's a reason why it's a private export).
PR Close #29249
2019-05-30 15:09:02 -04:00
Ben Lesh dd0815095f feat(ivy): add ɵɵtextInterpolateX instructions (#30011)
- `ɵɵtextBinding(..., ɵɵinterpolationX())` instructions will now just be `ɵɵtextInterpolate(...)` instructions

PR Close #30011
2019-05-29 12:38:58 -04:00
Alex Rickabaugh 84dd2679a9 fix(core): require 'static' flag on queries in typings (#30639)
This commit makes the static flag on @ViewChild and @ContentChild required.

BREAKING CHANGE:

In Angular version 8, it's required that all @ViewChild and @ContentChild
queries have a 'static' flag specifying whether the query is 'static' or
'dynamic'. The compiler previously sorted queries automatically, but in
8.0 developers are required to explicitly specify which behavior is wanted.
This is a temporary requirement as part of a migration; see
https://angular.io/guide/static-query-migration for more details.

@ViewChildren and @ContentChildren queries are always dynamic, and so are
unaffected.

PR Close #30639
2019-05-24 16:55:00 -04:00
Alex Rickabaugh ccc76f7498 feat(platform-webworker): deprecate platform-webworker (#30642)
DEPRECATION:

platform-webworker has been around since the initial release of Angular
version 2. It began as an experiment to leverage Angular's rendering
architecture and try something different: to run an entire web application
in a web worker.

We've learned a lot from this experiment, and have come to the conclusion
that pushing entire applications to run in a web worker is not a recipe for
success for most applications. This is due to a number of unresolved issues,
including:

* Poor or non-existent support for web worker APIs in web crawlers/indexers.
* Poor support in build and bundling tooling.

As a result, as of Angular version 8, we are deprecating the
`platform-webworker` APIs in Angular. This consists of both NPM packages,
`@angular/platform-webworker` and `@angular/platform-webworker-dynamic`.

Going forward, we will focus our efforts related to web workers around their
primary use case of offloading CPU-intensive but not critical work.

FW-1339 #resolve

PR Close #30642
2019-05-23 15:09:48 -07:00
Alex Rickabaugh f310a5960e feat(core): deprecate integration with the Web Tracing Framework (WTF) (#30642)
DEPRECATION:

Angular previously has supported an integration with the Web Tracing
Framework (WTF) for performance testing of Angular applications. This
integration has not been maintained and likely does not work for the
majority of Angular applications today. As a result, we are deprecating
the integration in Angular version 8.

This deprecation covers the following public APIs:
* `WtfScopeFn`
* `wtfCreateScope`
* `wtfStartTimeRange`
* `wtfEndTimeRange`
* `wtfLeave`

FW-1338 #resolve

PR Close #30642
2019-05-23 15:09:48 -07:00
Ben Lesh 2cdbe9b2ef refactor(ivy): ensure new attribute instructons are available in JIT (#30503)
PR Close #30503
2019-05-22 16:30:29 -07:00
Ben Lesh 7555a46e23 refactor(ivy): add new attribute interpolation instructions (#30503)
PR Close #30503
2019-05-22 16:30:28 -07:00
Ben Lesh 38d7acee4d refactor(ivy): add new ɵɵattribute instruction (#30503)
- adds the ɵɵattribute instruction
- adds compilation handling for Δattribute instruction
- updates tests

PR Close #30503
2019-05-22 16:30:28 -07:00
cexbrayat f6bf8928f2 fix(core): temporarily remove @deprecated jsdoc tag for a TextBed.get overload (#30514)
PR #29290 introduced a new `TestBed.get` signature and deprecated the existing one.
This raises a lot of TSLint deprecation warnings in projects using a strict TS config (see #29905 for context), so we are temporarily removing the `@deprecated` annotation in favor of a plain text warning until we properly fix it.

Refs #29905
Fixes FW-1336

PR Close #30514
2019-05-21 13:11:21 -07:00
Kara Erickson a96976e88f fix(core): remove deprecated `TestBed.deprecatedOverrideProvider` API (#30576)
BREAKING CHANGE

In PR #19558, we fixed a bug in `TestBed.overrideProvider` where
eager providers were not being instantiated correctly. However,
it turned out that since this bug had been around for quite a bit,
many apps were relying on the broken behavior where the providers
would not be instantiated. To assist in the transition, the
`TestBed.deprecatedOverrideProvider` method was temporarily
introduced to mimic the old behavior so that apps would have a
longer time period to migrate their code.

2 years and 3 versions later, it is time to remove the temporary
method. This commit removes `TestBed.deprecatedOverrideProvider`
altogether. Any usages of `TestBed.deprecatedOverrideProvider`
should be replaced with `TestBed.overrideProvider`. This may mean
that providers that were not created before will now be instantiated,
which could mean that your tests need to provide more mocks or stubs
for the dependencies of the newly instantiated providers.

PR Close #30576
2019-05-21 12:37:17 -07:00
Ben Lesh d7eaae6f22 refactor(ivy): Move instructions back to ɵɵ (#30546)
There is an encoding issue with using delta `Δ`, where the browser will attempt to detect the file encoding if the character set is not explicitly declared on a `<script/>` tag, and Chrome will find the `Δ` character and decide it is window-1252 encoding, which misinterprets the `Δ` character to be some other character that is not a valid JS identifier character

So back to the frog eyes we go.

```
    __
   /ɵɵ\
  ( -- ) - I am ineffable. I am forever.
 _/    \_
/  \  /  \
==  ==  ==
```

PR Close #30546
2019-05-20 16:37:47 -07:00
cexbrayat 95830ee584 feat(common): stricter types for SlicePipe (#30156)
Adds overloads to the `transform` methods of `SlicePipe`,
to have better types than `any` for `value` and `any` as a return.
With this commit, using `slice` in an `ngFor` still allow to type-check the content of the `ngFor`
with `fullTemplateTypeCheck` enabled in Ivy:

    <div *ngFor="let user of users | slice:0:2">{{ user.typo }}</div>
                                                        |
                                                        `typo` does not exist on type `UserModel`

whereas it is currently not catched (as the return of `slice` is `any`) neither in VE nor in Ivy.

BREAKING CHANGE
`SlicePipe` now only accepts an array of values, a string, null or undefined.
This was already the case in practice, and it still throws at runtime if another type is given.
But it is now a compilation error to try to call it with an unsupported type.

PR Close #30156
2019-05-17 14:21:36 -07:00
Brandon 6cb3b50a03 docs(docs-infra): add common/upgrade to API package sources (#30331)
Closes #30332

PR Close #30331
2019-05-16 11:47:16 -07:00
JoostK e9ead2bc09 feat(ivy): more accurate type narrowing for `ngIf` directive (#30248)
A structural directive can specify a template guard for an input, such that
the type of that input's binding can be narrowed based on the guard's return
type. Previously, such template guards could only be methods, of which an
invocation would be inserted into the type-check block (TCB). For `NgIf`,
the template guard narrowed the type of its expression to be `NonNullable`
using the following declaration:

```typescript
export declare class NgIf {
  static ngTemplateGuard_ngIf<E>(dir: NgIf, expr: E): expr is NonNullable<E>
}
```

This works fine for usages such as `*ngIf="person"` but starts to introduce
false-positives when e.g. an explicit non-null check like
`*ngIf="person !== null"` is used, as the method invocation in the TCB
would not have the desired effect of narrowing `person` to become
non-nullable:

```typescript
if (NgIf.ngTemplateGuard_ngIf(directive, ctx.person !== null)) {
  // Usages of `ctx.person` within this block would
  // not have been narrowed to be non-nullable.
}
```

This commit introduces a new strategy for template guards to allow for the
binding expression itself to be used as template guard in the TCB. Now,
the TCB generated for `*ngIf="person !== null"` would look as follows:

```typescript
if (ctx.person !== null) {
  // This time `ctx.person` will successfully have
  // been narrowed to be non-nullable.
}
```

This strategy can be activated by declaring the template guard as a
property declaration with `'binding'` as literal return type.

See #30235 for an example where this led to a false positive.

PR Close #30248
2019-05-16 09:48:40 -07:00
Jason Aden 1aff524b63 feat(common): add ability to watch for AngularJS URL updates through `onUrlChange` hook (#30466)
The LocationShim (replacement for `$location`) was added to centralize dealing with the browser URL. Additionally, an `onUrlChange` method was added to Angular's Location service. This PR adds a corresponding method to the LocationShim so updates from AngularJS can be tracked in Angular.

PR Close #30466
2019-05-16 09:43:32 -07:00
Ben Lesh cf86ed7b29 refactor(ivy): migrate ɵɵ prefix back to Δ (#30362)
Now that issues are resolved with Closure compiler, we can move back to our desired prefix of `Δ`.

PR Close #30362
2019-05-14 16:52:15 -07:00
Kristiyan Kostadinov f74373f2dd fix(ivy): align NgModule registration timing with ViewEngine (#30244)
Currently in Ivy `NgModule` registration happens when the class is declared, however this is inconsistent with ViewEngine and requires extra generated code. These changes remove the generated code for `registerModuleFactory`, pass the id through to the `ngModuleDef` and do the module registration inside `NgModuleFactory.create`.

This PR resolves FW-1285.

PR Close #30244
2019-05-13 11:13:25 -07:00
Matias Niemelä d8665e639b refactor(ivy): drop `element` prefixes for all styling-related instructions (#30318)
This is the final patch to migrate the Angular styling code to have a
smaller instruction set in preparation for the runtime refactor. All
styling-related instructions now work both in template and hostBindings
functions and do not use `element` as a prefix for their names:

BEFORE:
  elementStyling()
  elementStyleProp()
  elementClassProp()
  elementStyleMap()
  elementClassMap()
  elementStylingApply()

AFTER:
  styling()
  styleProp()
  classProp()
  styleMap()
  classMap()
  stylingApply()

PR Close #30318
2019-05-08 15:33:39 -07:00
Matias Niemelä c016e2c4ec refactor(ivy): migrate all host-specific styling instructions to element-level styling instructions (#30336)
This patch removes all host-specific styling instructions in favor of
using element-level instructions instead. Because of the previous
patches that made sure `select(n)` worked between styling calls, all
host level instructions are not needed anymore. This patch changes each
of those instruction calls to use any of the `elementStyling*`,
`elementStyle*` and `elementClass*` styling instructions instead.

PR Close #30336
2019-05-08 14:54:44 -07:00
Matias Niemelä 7c8a62d64d refactor(ivy): remove elementIndex param from all element-level styling instructions (#30313)
This patch is one commit of many patches that will unify all styling instructions
across both template-level bindings and host-level bindings. This patch in particular
removes the `elementIndex` param because it is already set prior to each styling
instruction via the `select(n)` instruction.

PR Close #30313
2019-05-08 09:18:19 -07:00
Matias Niemelä be8fbac942 refactor(ivy): break apart stylingMap into styleMap and classMap instructions (#30293)
This patch breaks up the existing `elementStylingMap` into
`elementClassMap` and `elementStyleMap` instructions. It also breaks
apart `hostStlyingMap` into `hostClassMap` and `hostStyleMap`
instructions. This change allows for better tree-shaking and reduces
the complexity of the styling algorithm code for `[style]` and `[class]`
bindings.

PR Close #30293
2019-05-07 11:06:04 -07:00
Kristiyan Kostadinov 68ff2cc323 fix(ivy): host bindings and listeners not being inherited from undecorated classes (#30158)
Fixes `HostBinding` and `HostListener` declarations not being inherited from base classes that don't have an Angular decorator.

This PR resolves FW-1275.

PR Close #30158
2019-04-29 13:35:14 -07:00
Ben Lesh f3ce8eeb83 fix(ivy): property bindings use correct indices (#30129)
- Extracts and documents code that will be common to interpolation instructions
- Ensures that binding indices are updated at the proper time during compilation
- Adds additional tests

Related #30011

PR Close #30129
2019-04-26 11:09:51 -07:00
Ben Lesh b9f0720c95 refactor(ivy): undeprecate inject (#30132)
PR Close #30132
2019-04-26 11:06:42 -07:00
Brandon Roberts 6de4cbdd41 fix(common): add upgrade sub-package to ng_package rule for @angular/common (#30117)
Follow-up to #30055 to include @angular/common/upgrade in the npm package

Closes #30116

PR Close #30117
2019-04-25 15:01:17 -07:00
Adam Plumer 3a9d2473ca feat: remove deprecated DOCUMENT token from platform-browser (#28117)
PR Close #28117
2019-04-25 14:40:16 -07:00
George Kalpakas 8f120aff33 refactor(service-worker): DRY up SW registration logic (#21842)
PR Close #21842
2019-04-25 12:29:58 -07:00
JiaLi.Passion 4cfba58072 feat(service-worker): allow configuring when the SW is registered (#21842)
Fixes #20970

PR Close #21842
2019-04-25 12:29:58 -07:00
deebloo 39c0152b76 feat(service-worker): expose `SwRegistrationOptions` token to allow runtime config (#21842)
Previously, the ServiceWorker registration options should be defined as
an object literal (in order for them to be compatible with Ahead-of-Time
compilation), thus making it impossible to base the ServiceWorker
behavior on runtime conditions.
This commit allows specifying the registration options using a regular
provider, which means that it can take advantage of the `useFactory`
option to determine the config at runtime, while still remaining
compatible with AoT compilation.

PR Close #21842
2019-04-25 12:29:58 -07:00
Alex Rickabaugh c61df39323 feat(router): deprecate loadChildren:string (#30073)
The proposed ES dynamic import() is now supported by the Angular CLI and the
larger toolchain. This renders the `loadChildren: string` API largely
redundant, as import() is far more natural, is less error-prone, and is
standards compliant. This commit deprecates the `string` form of
`loadChildren` in favor of dynamic import().

DEPRECATION:

When defining lazy-loaded route, Angular previously offered two options for
configuring the module to be loaded, both via the `loadChildren` parameter
of the route. Most Angular developers are familiar withthe `string` form of
this API. For example, the following route definition configures Angular to
load a `LazyModule` NgModule from `lazy-route/lazy.module.ts`:

```
[{
  path: 'lazy',
  loadChildren: 'lazy-route/lazy.module#LazyModule',
}]
```

This "magic string" configuration was previously necessary as there was
no dynamic module loading standard on the web. This has changed with the
pending standardization of dynamic `import()` expressions, which are now
supported in the Angular CLI and in web tooling in general. `import()`
offers a more natural and robust solution to dynamic module loading. The
above example can be rewritten to use dynamic `import()`:

```
[{
  path: 'lazy',
  loadChildren: () => import('./lazy-route/lazy.module').then(mod => mod.LazyModule),
}]
```

This form of lazy loading offers significant advantages in terms of:

* type checking via TypeScript
* simplicity of generated code
* future potential to run natively in supporting browsers
  (see: [caniuse: dynamic import()](https://caniuse.com/#feat=es6-module-dynamic-import))

As a result, Angular is deprecating the `loadChildren: string` syntax in
favor of ES dynamic `import()`. An automatic migration will run during
`ng upgrade` to convert your existing Angular code to the new syntax.

PR Close #30073
2019-04-24 17:06:05 -07:00
Jason Aden 071ee64d91 refactor(common): rename LocationUpgradeService and remove angular/upgrade dependency (#30055)
PR Close #30055
2019-04-24 13:49:29 -07:00
Jason Aden efdbbe1aa6 test(common): add fallback for URL parsing in older browsers (IE < Edge) (#30055)
PR Close #30055
2019-04-24 13:49:29 -07:00
Jason Aden 4277600d5e feat(common): provide replacement for AngularJS $location service (#30055)
This commit provides a replacement for `$location`. The new service is written in Angular, and can be consumed into existing applications by using the downgraded version
of the provider.

Prior to this addition, applications upgrading from AngularJS to Angular could get into a situation where AngularJS wanted to control the URL, and would often parse or se
rialize the URL in a different way than Angular. Additionally, AngularJS was alerted to URL changes only through the `$digest` cycle. This provided a buggy feedback loop
from Angular to AngularJS.

With this new `LocationUpgradeProvider`, the `$location` methods and events are provided in Angular, and use Angular APIs to make updates to the URL. Additionally, change
s to the URL made by other parts of the Angular framework (such as the Router) will be listened for and will cause events to fire in AngularJS, but will no longer attempt
 to update the URL (since it was already updated by the Angular framework).

This centralizes URL reads and writes to Angular and should help provide an easier path to upgrading AngularJS applications to Angular.

PR Close #30055
2019-04-24 13:49:29 -07:00
Jason Aden b635fe80cc feat(common): add APIs to read component pieces of URL (#30055)
Without this change, the framework doesn't surface URL parts such as hostname, protocol, and port. This makes it difficult to rebuild a complete URL. This change provides new APIs to read these values.

PR Close #30055
2019-04-24 13:49:29 -07:00
Jason Aden b44b14368f feat(common): add ability to retrieve the state from Location service (#30055)
Previously there wasn't a way to retrieve `history.state` from the `Location` service. The only time the framework exposed this value was in navigation events. This meant if you weren't using the Angular router, there wasn't a way to get access to this `history.state` value other than going directly to the DOM.

This PR adds an API to retrieve the value of `history.state`. This will be useful and needed to provide a backwards-compatible `Location` service that can emulate AngularJS's `$location` service since we will need to be able to read the state data in order to produce AngularJS location transition events.

This feature will additionally be useful to any application that wants to access state data through Angular rather than going directly to the DOM APIs.

PR Close #30055
2019-04-24 13:49:28 -07:00
Kristiyan Kostadinov c7f1b0a97f fix(ivy): queries not being inherited from undecorated classes (#30015)
Fixes view and content queries not being inherited in Ivy, if the base class hasn't been annotated with an Angular decorator (e.g. `Component` or `Directive`).

Also reworks the way the `ngBaseDef` is created so that it is added at the same point as the queries, rather than inside of the `Input` and `Output` decorators.

This PR partially resolves FW-1275. Support for host bindings will be added in a follow-up, because this PR is somewhat large as it is.

PR Close #30015
2019-04-24 10:38:44 -07:00
Ben Lesh 0bcb2320ba feat(ivy): generate ɵɵpropertyInterpolateX instructions (#30008)
- Compiler now generates `ɵɵpropertyInterpolateX` instructions.

PR Close #30008
2019-04-22 17:10:36 -07:00
Ben Lesh 10217bb3bc feat(ivy): generate ɵɵproperty instructions (#29946)
PR Close #29946
2019-04-19 16:07:52 -07:00
Alan Agius 4bde40f7c2 fix(core): don't include a local `EventListener` in typings (#29809)
With dts bundles, `core.d.ts` will include an `EventListener` class as it's used in 303eae918d/packages/core/src/debug/debug_node.ts (L32)

This will conflict with the DOM EventListener, as anything in `core.d.ts` which is using the DOM EventListener will fallback in using the one defined in the same module and hence build will fail because their implementation is different.

With this change, we rename the local `EventListener` to `DebugEventListener`, the later one is non exported.

Fixes #29806

PR Close #29809
2019-04-17 16:45:35 -07:00
Filipe Silva 2bfb6a02e2 fix(router): support non-NgFactory promise in loadChildren typings (#29832)
PR Close #29832
2019-04-16 10:46:12 -07:00
Alex Rickabaugh 9147092a15 Revert "feat(ivy): use i18n locale data to determine the plural form of ICU expressions (#29249)" (#29918)
This reverts commit 6a8cca7975.

PR Close #29918
2019-04-15 16:55:51 -07:00
Olivier Combe 6a8cca7975 feat(ivy): use i18n locale data to determine the plural form of ICU expressions (#29249)
Plural ICU expressions depend on the locale (different languages have different plural forms). Until now the locale was hard coded as `en-US`.
For compatibility reasons, if you use ivy with AOT and bootstrap your app with `bootstrapModule` then the `LOCALE_ID` token will be set automatically for ivy, which is then used to get the correct plural form.
If you use JIT, you need to define the `LOCALE_ID` provider on the module that you bootstrap.
For `TestBed` you can use either `configureTestingModule` or `overrideProvider` to define that provider.
If you don't use the compat mode and start your app with `renderComponent` you need to call `ɵsetLocaleId` manually to define the `LOCALE_ID` before bootstrap. We expect this to change once we start adding the new i18n APIs, so don't rely on this function (there's a reason why it's a private export).
PR Close #29249
2019-04-15 10:40:26 -07:00
Alex Rickabaugh b0578061ce refactor(ivy): use ɵɵ instead of Δ for now (#29850)
The `Δ` caused issue with other infrastructure, and we are temporarily
changing it to `ɵɵ`.

This commit also patches ts_api_guardian_test and AIO to understand `ɵɵ`.

PR Close #29850
2019-04-11 16:27:56 -07:00
Olivier Combe 91c7b451d5 feat(ivy): support i18n without closure (#28689)
So far using runtime i18n with ivy meant that you needed to use Closure and `goog.getMsg` (or a polyfill). This PR changes the compiler to output both closure & non-closure code, while the unused option will be tree-shaken by minifiers.
This means that if you use the Angular CLI with ivy and load a translations file, you can use i18n and the application will not throw at runtime.
For now it will not translate your application, but at least you can try ivy without having to remove all of your i18n code and configuration.
PR Close #28689
2019-04-11 08:28:45 -07:00
Kristiyan Kostadinov def73a6728 perf(ivy): avoid storing raw selectors in projectionDef (#29578)
Currently in Ivy we pass both the raw and parsed selectors to the projectionDef instruction, because the parsed selectors are used to match most nodes, whereas the raw ones are used to match against nodes with the ngProjectAs attribute. The raw selectors add a fair bit of code that won't be used in most cases, because ngProjectAs is somewhat rare.

These changes rework the compiler not to output the raw selectors in the projectionDef, but to parse the selector in ngProjectAs and to store it on the TAttributes. The logic for matching has also been changed so that it matches the pre-parsed ngProjectAs selector against the list of projection selectors.

PR Close #29578
2019-04-11 08:09:09 -07:00
Ben Lesh 138ca5a246 refactor(ivy): prefix all generated instructions (#29692)
- Updates all instructions to be prefixed with the Greek delta symbol

PR Close #29692
2019-04-10 12:11:40 -07:00