We had a couple of places where we were assuming that if a particular
symbol has a value, then it will exist at runtime. This is true in most cases,
but it breaks down for `const` enums.
Fixes#38513.
PR Close#38542
Previously, if `useLegacyIds` was enabled, the message extractor
was always rendering the legacy message ids in translation
files even if an explicit "custom message id" had been provided
in the original message.
PR Close#38498
Fix a bug in the HTML sanitizer where an unclosed iframe tag would
result in an escaped closing body tag as the output:
_sanitizeHtml(document, '<iframe>') => '</body>'
This closing body tag comes from the DOMParserHelper where the HTML to be
sanitized is wrapped with surrounding body tags. When an opening iframe
tag is parsed by DOMParser, which DOMParserHelper uses, everything up
until its matching closing tag is consumed as a text node. In the above
example this includes the appended closing body tag.
By removing the explicit closing body tag from the DOMParserHelper and
relying on the body tag being closed implicitly at the end, the above
example is sanitized as expected:
_sanitizeHtml(document, '<iframe>') => ''
PR Close#38454
Previously nested container placeholders (i.e. HTML elements) were
not being fully parsed from translation files. This resulted in bad
translation of messages that contain these placeholders.
Note that this causes the canonical message ID to change for
such messages. Currently all messages generated from
templates use "legacy" message ids that are not affected by
this change, so this fix should not be seen as a breaking change.
Fixes#38422
PR Close#38452
When creating a `ParsedTranslation` from a set of message parts and
placeholder names a textual representation of the message is computed.
Previously the last placeholder and text segment were missing from this
computed message string.
PR Close#38452
This commit adds a `getTemplateOfComponent` method to the
`TemplateTypeChecker` API, which retrieves the actual nodes parsed and used
by the compiler for template type-checking. This is advantageous for the
language service, which may need to query other APIs in
`TemplateTypeChecker` that require the same nodes used to bind the template
while generating the TCB.
Fixes#38352
PR Close#38355
In general, the router only matches and loads a single Route config tree. However,
named outlets with empty paths are a special case where the router can
and should actually match two different `Route`s and ensure that the
modules are loaded for each match.
This change updates the "ApplyRedirects" stage to ensure that named
outlets with empty paths finish loading their configs before proceeding
to the next stage in the routing pipe. This is necessary because if the
named outlet has `loadChildren` but the associated lazy config is not loaded
before following stages attempt to match and activate relevant `Route`s,
an error will occur.
fixes#12842
PR Close#38379
Close#38526, #38516, #38513
After update to `APF`, the `directories` and `files` options are not compatible,
so we need to remove those fileds to make sure everything work as expected.
PR Close#38528
This commit introduces a new subscription in the `routerLinkActive` directive which triggers an update
when any of its associated routerLinks have changes. `RouterLinkActive` not only needs to know when
links are added or removed, but it also needs to know about if a link it already knows about
changes in some way.
Quick note that `from...mergeAll` is used instead of just a simple
`merge` (or `scheduled...mergeAll`) to avoid introducing new rxjs
operators in order to keep bundle size down.
Fixes#18469
PR Close#38511
This commit introduces a new subscription in the `routerLinkActive` directive which triggers an update
when any of its associated routerLinks have changes. `RouterLinkActive` not only needs to know when
links are added or removed, but it also needs to know about if a link it already knows about
changes in some way.
Quick note that `from...mergeAll` is used instead of just a simple
`merge` (or `scheduled...mergeAll`) to avoid introducing new rxjs
operators in order to keep bundle size down.
Fixes#18469
PR Close#38349
Now that Ivy compiler has a proper `TemplateTypeChecker` interface
(see https://github.com/angular/angular/pull/38105) we no longer need to
keep the temporary compiler implementation.
The temporary compiler was created to enable testing infrastructure to
be developed for the Ivy language service.
This commit removes the whole `ivy/compiler` directory and moves two
functions `createTypeCheckingProgramStrategy` and
`getOrCreateTypeCheckScriptInfo` to the `LanguageService` class.
Also re-enable the Ivy LS test since it's no longer blocking development.
PR Close#38310
Similarly to the change we landed in the `@angular/core` reflection
capabilities, we need to make sure that ngcc can detect pass-through
delegate constructors for classes using downleveled ES2015 output.
More details can be found in the preceding commit, and in the issue
outlining the problem: #38453.
Fixes#38453.
PR Close#38463
In the Angular Package Format, we always shipped UMD bundles and previously even ES5 module output.
With V10, we removed the ES5 module output but kept the UMD ES5 output.
For this, we were able to remove our second TypeScript transpilation. Instead we started only
building ES2015 output and then downleveled it to ES5 UMD for the NPM packages. This worked
as expected but unveiled an issue in the `@angular/core` reflection capabilities.
In JIT mode, Angular determines constructor parameters (for DI) using the `ReflectionCapabilities`. The
reflection capabilities basically read runtime metadata of classes to determine the DI parameters. Such
metadata can be either stored in static class properties like `ctorParameters` or within TypeScript's `design:params`.
If Angular comes across a class that does not have any parameter metadata, it tries to detect if the
given class is actually delegating to an inherited class. It does this naively in JIT by checking if the
stringified class (function in ES5) matches a certain pattern. e.g.
```js
function MatTable() {
var _this = _super.apply(this, arguments) || this;
```
These patterns are reluctant to changes of the class output. If a class is not recognized properly, the
DI parameters will be assumed empty and the class is **incorrectly** constructed without arguments.
This actually happened as part of v10 now. Since we downlevel ES2015 to ES5 (instead of previously
compiling sources directly to ES5), the class output changed slightly so that Angular no longer detects
it. e.g.
```js
var _this = _super.apply(this, __spread(arguments)) || this;
```
This happens because the ES2015 output will receive an auto-generated constructor if the class
defines class properties. This constructor is then already containing an explicit `super` call.
```js
export class MatTable extends CdkTable {
constructor() {
super(...arguments);
this.disabled = true;
}
}
```
If we then downlevel this file to ES5 with `--downlevelIteration`, TypeScript adjusts the `super` call so that
the spread operator is no longer used (not supported in ES5). The resulting super call is different to the
super call that would have been emitted if we would directly transpile to ES5. Ultimately, Angular no
longer detects such classes as having an delegate constructor -> and DI breaks.
We fix this by expanding the rather naive RegExp patterns used for the reflection capabilities
so that downleveled pass-through/delegate constructors are properly detected. There is a risk
of a false-positive as we cannot detect whether `__spread` is actually the TypeScript spread
helper, but given the reflection patterns already make lots of assumptions (e.g. that `super` is
actually the superclass, we should be fine making this assumption too. The false-positive would
not result in a broken app, but rather in unnecessary providers being injected (as a noop).
Fixes#38453
PR Close#38463
Previously placeholders were only rendered for dynamic interpolation
expressons in `$localize` tagged strings. But there are also potentially
dynamic values in ICU expressions too, so we need to render these as
placeholders when extracting i18n messages into translation files.
PR Close#38484
This commit updates the code to move generated i18n statements into the `consts` field of
ComponentDef to avoid invoking `$localize` function before component initialization (to better
support runtime translations) and also avoid problems with lazy-loading when i18n defs may not
be present in a chunk where it's referenced.
Prior to this change the i18n statements were generated at the top leve:
```
var I18N_0;
if (typeof ngI18nClosureMode !== "undefined" && ngI18nClosureMode) {
var MSG_X = goog.getMsg(“…”);
I18N_0 = MSG_X;
} else {
I18N_0 = $localize('...');
}
defineComponent({
// ...
template: function App_Template(rf, ctx) {
i0.ɵɵi18n(2, I18N_0);
}
});
```
This commit updates the logic to generate the following code instead:
```
defineComponent({
// ...
consts: function() {
var I18N_0;
if (typeof ngI18nClosureMode !== "undefined" && ngI18nClosureMode) {
var MSG_X = goog.getMsg(“…”);
I18N_0 = MSG_X;
} else {
I18N_0 = $localize('...');
}
return [
I18N_0
];
},
template: function App_Template(rf, ctx) {
i0.ɵɵi18n(2, 0);
}
});
```
Also note that i18n template instructions now refer to the `consts` array using an index
(similar to other template instructions).
PR Close#38404
This commit fixes a regression from "fix(common): ensure
scrollRestoration is writable (#30630)" that caused scrolling to not
happen at all in browsers that do not support scroll restoration. The
issue was that `supportScrollRestoration` was updated to return `false`
if a browser did not have a writable `scrollRestoration`. However, the
previous behavior was that the function would return `true` if
`window.scrollTo` was defined. Every scrolling function in the
`ViewportScroller` used `supportScrollRestoration` and, with the update
in bb88c9fa3d, no scrolling would be
performed if a browser did not have writable `scrollRestoration` but
_did_ have `window.scrollTo`.
Note, that this failure was detected in the saucelabs tests. IE does not
support scroll restoration so IE tests were failing.
PR Close#38468
When removal of one view causes removal of another one from the same
ViewContainerRef it triggers an error with views length calculation. This commit
fixes this bug by removing a view from the list of available views before invoking
actual view removal (which might be recursive and relies on the length of the list
of available views).
Fixes#38201.
PR Close#38317
For a template that contains for example `<span *ngIf="first"></span>`
there's no need to render the `NgIf` guard expression, as the child
scope does not have any type-checking statements, so any narrowing
effect of the guard is not applicable.
This seems like a minor improvement, however it reduces the number of
flow-node antecedents that TypeScript needs to keep into account for
such cases, resulting in an overall reduction of type-checking time.
PR Close#38418
The template type-checker would always generate a directive declaration
even if its type was never used. For example, directives without any
input nor output bindings nor exportAs references don't need the
directive to be declared, as its type would never be used.
This commit makes the `TcbOp`s that are responsible for declaring a
directive as optional, such that they are only executed when requested
from another operation.
PR Close#38418
The template type-checker would generate a statement with a call
expression for all DOM elements in a template of the form:
```
const _t1 = document.createElement("div");
```
Profiling has shown that this is a particularly expensive call to
perform type inference on, as TypeScript needs to perform signature
selection of `Document.createElement` and resolve the exact type from
the `HTMLElementTagNameMap`. However, it can be observed that the
statement by itself does not contribute anything to the type-checking
result if `_t1` is not actually used anywhere, which is only rarely the
case---it requires that the element is referenced by its name from
somewhere else in the template. Consequently, the type-checker can skip
generating this statement altogether for most DOM elements.
The effect of this optimization is significant in several phases:
1. Less type-check code to generate
2. Less type-check code to emit and parse again
3. No expensive type inference to perform for the call expression
The effect on phase 3 is the most significant here, as type-checking is
not currently incremental in the sense that only phases 1 and 2 can
be reused from a prior compilation. The actual type-checking of all
templates in phase 3 needs to be repeated on each incremental
compilation, so any performance gains we achieve here are very
beneficial.
PR Close#38418
The `@HostListener` functions and lifecycle hooks aren't intended to be public API but
do need to appear in the `.d.ts` files or type checking will break. Adding the
nodoc annotation will correctly hide this function on the docs site.
Again, note that `@internal` cannot be used because the result would be
that the functions then do not appear in the `.d.ts` files. This would
break lifecycle hooks because the class would be seen as not
implementing the interface correctly. This would also break
`HostListener` because the compiled templates would attempt to call the
`onClick` functions, but those would also not appear in the `d.ts` and
would produce errors like "Property 'onClick' does not exist on type 'RouterLinkWithHref'".
PR Close#38448
Fixes an error if a CSS custom property, used inside a host binding, has a
number in its name. The error is thrown because the styling parser only
expects characters from A to Z,dashes, underscores and a handful of other
characters.
Fixes#37292.
PR Close#38432
The compiler does not currently report errors when there's an `@Input()`
for a `private`, `protected`, or `readonly` directive/component class member.
This change adds an option to enable reporting errors when a template
attempts to bind to one of these restricted input fields.
PR Close#38249
Prior to this change, the template type checker would always use a
type-constructor to instantiate a directive. This type-constructor call
serves two purposes:
1. Infer any generic types for the directive instance from the inputs
that are passed in.
2. Type check the inputs that are passed into the directive's inputs.
The first purpose is only relevant when the directive actually has any
generic types and using a type-constructor for these cases inhibits
a type-check performance penalty, as a type-constructor's signature is
quite complex and needs to be generated for each directive.
This commit refactors the generated type-check blocks to only generate
a type-constructor call for directives that have generic types. Type
checking of inputs is achieved by generating individual statements for
all inputs, using assignments into the directive's fields.
Even if a type-constructor is used for type-inference of generic types
will the input checking also be achieved using the individual assignment
statements. This is done to support the rework of the language service,
which will start to extract symbol information from the type-check
blocks.
As a future optimization, it may be possible to reduce the number of
inputs passed into a type-constructor to only those inputs that
contribute the the type-inference of the generics. As this is not a
necessity at the moment this is left as follow-up work.
Closes#38185
PR Close#38249
"Quote expressions" are expressions that start with an identifier followed by a
comma, allowing arbitrary syntax to follow. These kinds of expressions would
throw a an error in the template type checker, which would make them hard to
track down. As quote expressions are not generally used at all, the error would
typically occur for URLs that would inadvertently occur in a binding:
```html
<a [href]="https://example.com"></a>
```
This commit lets such bindings be inferred as the `any` type.
Fixes#36568
Resolves FW-2051
PR Close#37917
In TypeScript 3.8 support was added for type-only imports, which only brings in
the symbol as a type, not their value. The Angular compiler did not yet take
the type-only keyword into account when representing symbols in type positions
as value expressions. The class metadata that the compiler emits would include
the value expression for its parameter types, generating actual imports as
necessary. For type-only imports this should not be done, as it introduces an
actual import of the module that was originally just a type-only import.
This commit lets the compiler deal with type-only imports specially, preventing
a value expression from being created.
Fixes#37900
PR Close#37912
When using the safe navigation operator in a binding expression, a temporary
variable may be used for storing the result of a side-effectful call.
For example, the following template uses a pipe and a safe property access:
```html
<app-person-view [enabled]="enabled" [firstName]="(person$ | async)?.name"></app-person-view>
```
The result of the pipe evaluation is stored in a temporary to be able to check
whether it is present. The temporary variable needs to be declared in a separate
statement and this would also cause the full expression itself to be pulled out
into a separate statement. This would compile into the following
pseudo-code instructions:
```js
var temp = null;
var firstName = (temp = pipe('async', ctx.person$)) == null ? null : temp.name;
property('enabled', ctx.enabled)('firstName', firstName);
```
Notice that the pipe evaluation happens before evaluating the `enabled` binding,
such that the runtime's internal binding index would correspond with `enabled`,
not `firstName`. This introduces a problem when the pipe uses `WrappedValue` to
force a change to be detected, as the runtime would then mark the binding slot
corresponding with `enabled` as dirty, instead of `firstName`. This results
in the `enabled` binding to be updated, triggering setters and affecting how
`OnChanges` is called.
In the pseudo-code above, the intermediate `firstName` variable is not strictly
necessary---it only improved readability a bit---and emitting it inline with
the binding itself avoids the out-of-order execution of the pipe:
```js
var temp = null;
property('enabled', ctx.enabled)
('firstName', (temp = pipe('async', ctx.person$)) == null ? null : temp.name);
```
This commit introduces a new `BindingForm` that results in the above code to be
generated and adds compiler and acceptance tests to verify the proper behavior.
Fixes#37194
PR Close#37911
In JIT compiled apps, component definitions are compiled upon first
access. For a component class `A` that extends component class `B`, the
`B` component is also compiled when the `InheritDefinitionFeature` runs
during the compilation of `A` before it has finalized. A problem arises
when the compilation of `B` would flush the NgModule scoping queue,
where the NgModule declaring `A` is still pending. The scope information
would be applied to the definition of `A`, but its compilation is still
in progress so requesting the component definition would compile `A`
again from scratch. This "inner compilation" is correctly assigned the
NgModule scope, but once the "outer compilation" of `A` finishes it
would overwrite the inner compilation's definition, losing the NgModule
scope information.
In summary, flushing the NgModule scope queue could trigger a reentrant
compilation, where JIT compilation is non-reentrant. To avoid the
reentrant compilation, a compilation depth counter is introduced to
avoid flushing the NgModule scope during nested compilations.
Fixes#37105
PR Close#37795
When navigations coming from Angular router we may have a payload stored in state property. When this
exists, set extras's state to the payload.
PR Close#28176
Queries weren't matching directives that provide themselves via string
injection tokens, because the assumption was that any string passed to
a query decorator refers to a template reference.
These changes make it so we match both template references and
providers while giving precedence to the template references.
Fixes#38313.
Fixes#38315.
PR Close#38321
When we were outputting class members for `setClassMetadata` calls,
we were using the string representation of the member name. This can
lead to us generating invalid code when the name contains dashes and
is quoted (e.g. `@Output() 'has-dashes' = new EventEmitter()`), because
the quotes will be stripped for the string representation.
These changes fix the issue by using the original name AST node that was
used for the declaration and which knows whether it's supposed to be
quoted or not.
Fixes#38311.
PR Close#38387
This commit contains no changes to code. It only breaks `i18n.ts` file
into `i18n.ts` + `i18n_apply.ts` + `i18n_parse.ts` +
`i18n_postprocess.ts` for easier maintenance.
PR Close#38368
Defer loading the wildcard module so that it is not loaded until
subscribed to. This fixes an issue where it was being eagerly loaded.
As an example, wildcard module loading should only occur after all other potential
matches have been exhausted. A test case for this was also added to
demonstrate the fix.
Fixes#25494
PR Close#38348
When a ServerStylesHost instance is destroyed, all of the shared styles added to the DOM
head element by that instance should be removed. Without this removal, over time a large
number of style rules will build up and cause extra memory pressure. This brings the
ServerStylesHost in line with the DomStylesHost used by the platform browser, which
performs this same cleanup.
PR Close#38367
The currently selected ICU was incorrectly being stored it `TNode`
rather than in `LView`.
Remove: `TIcuContainerNode.activeCaseIndex`
Add: `LView[TIcu.currentCaseIndex]`
PR Close#38345
This commit performs minor refactoring in Forms package to get rid of duplicate functions.
It looks like the functions were duplicated due to a slightly different type signatures, but
their logic is completely identical. The logic in retained functions remains the same and now
these function also accept a generic type to achieve the same level of type safety.
PR Close#38371
This commit uses getElementById and getElementsByName when an anchor scroll happens,
to avoid escaping the anchor and wrapping the code in a try/catch block.
Related to #28960
PR Close#30143
This change provides better typing for the `LView.debug` property which
is intended to be used by humans while debugging the application with
`ngDevMode` turned on.
In addition this chang also adds jasmine matchers for better asserting
that `LView` is in the correct state.
PR Close#38359
crisbeto
Leon Yu
Misko Hevery
Pete Bacon Darwin
Bjarki
Alex Rickabaugh
Andrew Scott
JiaLiPassion
Andrew Scott
Andrea Balducci
Joey Perrott
Keen Yee Liau
Paul Gschwendtner
Andrew Kushnir
Anas Barghoud
waterplea
Ahn
JoostK
Alexander Vologin
Zach Pomerantz
Alessandro