Angular Ivy interprets inline static style/class attribute values as instructions that
are processed whilst an element gets created. Because these inline style values are
referenced by style/class bindings, their inline style values are applied at a later
stage. Despite them being eventually applied, their values should be applied earlier
before any directives are instantiated so that directive code can rely on any inline
style/class changes.
This patch ensures that all static style/class attribute values are applied (rendered)
on the element before directives are instantiated.
Jira Issue: FW-1133
PR Close#29269
remove reference to npm
remove confusing optional comments and $(yarn bin) with missing /
remove reference to protractor commands which don't exist
provide yarn commands which don't require gulp installed globally
PR Close#29044
The instructions lead you to think you run this step before setting
up your locale. The command is mentioned further in the guide after
setup is complete.
Closes#26052
PR Close#29313
Following my previous change for placeholders removal, some special code that was used to find the last created node was no longer needed and had wrong interactions with the *ngFor directive.
Removing it fixed the issue.
PR Close#29308
Improves the failure message for the `explicit-query` timing TSLint rule
that is used within Google. Currently it's not very clear what action
developers need to take in order to resolve the lint failure manually.
PR Close#29258
In order to be able to use the static-query migration logic within
Google, we need to provide a TSLint rule entry-point that wires up
the schematic logic and provides reporting and automatic fixes.
PR Close#29258
The CircleCI team needs to know what causes the Kernel
inconsistency that most likely causes our no usable sandbox
errors. Therefore we add "uname -r"
PR Close#29309
When injecting with `@Attribute`, namespaced attributes should not match (in order to have feature parity with View Engine).
This PR resolves FW-1137
PR Close#29257
BREAKING CHANGE:
Certain elements (like `<tr>` or `<col>`) require parent elements to be of a certain type by the HTML specification
(ex. <tr> can only be inside <tbody> / <thead>). Before this change Angular template parser was auto-correcting
"invalid" HTML using the following rules:
- `<tr>` would be wrapped in `<tbody>` if not inside `<tbody>`, `<tfoot>` or `<thead>`;
- `<col>` would be wrapped in `<colgroup>` if not inside `<colgroup>`.
This meachanism of automatic wrapping / auto-correcting was problematic for several reasons:
- it is non-obvious and arbitrary (ex. there are more HTML elements that has rules for parent type);
- it is incorrect for cases where `<tr>` / `<col>` are at the root of a component's content, ex.:
```html
<projecting-tr-inside-tbody>
<tr>...</tr>
</projecting-tr-inside-tbody>
```
In the above example the `<projecting-tr-inside-tbody>` component culd be "surprised" to see additional
`<tbody>` elements inserted by Angular HTML parser.
PR Close#29219
Currently the project `bazelrc` file imports a user bazelrc if present. This
has been added in order to allow user-specific Bazel configuration settings
when working within the Angular project. Since we currently import that
user configuration before setting the project-specific settings, it's not
possible for developers to overwrite given options (e.g. the `symlink_prefix`).
Moving the import to the end of the file solves that problem.
PR Close#29279
Previously, ngtsc would resolve forward references while evaluating the
bootstrap, declaration, imports, and exports fields of NgModule types.
However, when generating the resulting ngModuleDef, the forward nature of
these references was not taken into consideration, and so the generated JS
code would incorrectly reference types not yet declared.
This commit fixes this issue by introducing function closures in the
NgModuleDef type, similarly to how NgComponentDef uses them for forward
declarations of its directives and pipes arrays. ngtsc will then generate
closures when required, and the runtime will unwrap them if present.
PR Close#29198
This fixes an issue with commit b6f6b117. In this commit, default imports
processed in a type-to-value conversion were recorded as non-local imports
with a '*' name, and the ImportManager generated a new default import for
them. When transpiled to ES2015 modules, this resulted in the following
correct code:
import i3 from './module';
// somewhere in the file, a value reference of i3:
{type: i3}
However, when the AST with this synthetic import and reference was
transpiled to non-ES2015 modules (for example, to commonjs) an issue
appeared:
var module_1 = require('./module');
{type: i3}
TypeScript renames the imported identifier from i3 to module_1, but doesn't
substitute later references to i3. This is because the import and reference
are both synthetic, and never went through the TypeScript AST step of
"binding" which associates the reference to its import. This association is
important during emit when the identifiers might change.
Synthetic (transformer-added) imports will never be bound properly. The only
possible solution is to reuse the user's original import and the identifier
from it, which will be properly downleveled. The issue with this approach
(which prompted the fix in b6f6b117) is that if the import is only used in a
type position, TypeScript will mark it for deletion in the generated JS,
even though additional non-type usages are added in the transformer. This
again would leave a dangling import.
To work around this, it's necessary for the compiler to keep track of
identifiers that it emits which came from default imports, and tell TS not
to remove those imports during transpilation. A `DefaultImportTracker` class
is implemented to perform this tracking. It implements a
`DefaultImportRecorder` interface, which is used to record two significant
pieces of information:
* when a WrappedNodeExpr is generated which refers to a default imported
value, the ts.Identifier is associated to the ts.ImportDeclaration via
the recorder.
* when that WrappedNodeExpr is later emitted as part of the statement /
expression translators, the fact that the ts.Identifier was used is
also recorded.
Combined, this tracking gives the `DefaultImportTracker` enough information
to implement another TS transformer, which can recognize default imports
which were used in the output of the Ivy transform and can prevent them
from being elided. This is done by creating a new ts.ImportDeclaration for
the imports with the same ts.ImportClause. A test verifies that this works.
PR Close#29266
Prior to this change default selector for Components was not applied in case selector is missing or defined as an empty string. This update aligns this behavior between Ivy and VE: now default selector is used for Components when it's needed. Directives with empty selector are not allowed and trigger a compile-time error in both Ivy and VE.
PR Close#29239
Recently we moved the Saucelabs job into a cronjob in order to avoid
heavy flakiness that we experienced due to a Saucelabs connect bug
that has been supposedly fixed by the Saucelabs team (no new version
is released yet though).
Our initial assumption was that we very rarely hit specific browser failures
and can therefore move the Saucelabs tests into a cronjob, but after some
days of having the cronjob, we realized that we actually hit browser-specific
failures quite often and that we should run the tests for every PR (like before)
PR Close#29255
With 6215799, we introduced a schematic for the new static-query timing.
Currently when someone runs the update schematic manually within his
CLI project (the schematic does not run automatically yet), he might have
noticed that the migration is executed for the same `tsconfig` file multiple
times. This can happen because the `getProjectTsConfigPaths` function
can incorrectly return the same tsconfig multiple times. The paths are not
properly deduped as we don't normalize the determined project tsconfig paths
PR Close#29133
Currently the static-query migration does not properly handle functions which
are declared externally. This is because we don't resolve the symbol of the
call-expression through its type. Currently we just determine the symbol of the
call-expression through the given call expression node, which doesn't necessarily
refer to the *value declaration* of the call expression. e.g. the symbol refers to the
import declaration which imports the external function. This means that we currently
can't check the external function as we couldn't find the actual value declaration.
We can fix this by resolving the type of the call expression and using the type in order
to retrieve the symbol containing the *value declaration*
PR Close#29133
Currently when the static-query runs for a project with multiple TypeScript
configuration files (e.g. a usual CLI project), the migration incorrectly
applies the code transformation multiple times. This is because the migration
is currently based on the source file contents in the file system, while the
actual source file contents could have already changed in the devkit schematic
tree.
PR Close#29133
Brandon Roberts
Matias Niemelä
Michael Prentice
Jason Aden
George Kalpakas
Kristiyan Kostadinov
Olivier Combe
Pete Bacon Darwin
Paul Gschwendtner
Adam Plumer
Greg Magolan
Alex Eagle
Marc Laval
cexbrayat
Pawel Kozlowski
Igor Minar
Kara Erickson
Alex Rickabaugh
Judy Bogart
Andrew Kushnir