Prior to this change, the template type checker would always allow a
value of type `undefined` to be passed into a directive's inputs, even
if the input's type did not allow for it. This was due to how the type
constructor for a directive was generated, where a `Partial` mapped
type was used to allow for inputs to be unset. This essentially
introduces the `undefined` type as acceptable type for all inputs.
This commit removes the `Partial` type from the type constructor, which
means that we can no longer omit any properties that were unset.
Instead, any properties that are not set will still be included in the
type constructor call, having their value assigned to `any`.
Before:
```typescript
class NgForOf<T> {
static ngTypeCtor<T>(init: Partial<Pick<NgForOf<T>,
'ngForOf'|'ngForTrackBy'|'ngForTemplate'>>): NgForOf<T>;
}
NgForOf.ngTypeCtor(init: {ngForOf: ['foo', 'bar']});
```
After:
```typescript
class NgForOf<T> {
static ngTypeCtor<T>(init: Pick<NgForOf<T>,
'ngForOf'|'ngForTrackBy'|'ngForTemplate'>): NgForOf<T>;
}
NgForOf.ngTypeCtor(init: {
ngForOf: ['foo', 'bar'],
ngForTrackBy: null as any,
ngForTemplate: null as any,
});
```
This change only affects generated type check code, the generated
runtime code is not affected.
Fixes#32690
Resolves FW-1606
PR Close#33066
Currently, method `getVarDeclarations()` does not try to resolve the type of
exported variable from *ngIf directive. It always returns `any` type.
By resolving the real type of exported variable, it is now possible to use this
type information in language service and provide completions, go to definition
and quick info functionality in expressions that use exported variable.
Also language service will provide more accurate diagnostic errors during
development.
PR Close#33016
Directive defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
ngDirectiveDef to dir. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.
Note that the other "defs" (ngFactoryDef, etc) will be
prefixed and shortened in follow-up PRs, in an attempt to
limit how large and conflict-y this change is.
PR Close#33110
For elements in a template that look like custom elements, i.e.
containing a dash in their name, the template type checker will now
issue an error with instructions on how the resolve the issue.
Additionally, a property binding to a non-existent property will also
produce a more descriptive error message.
Resolves FW-1597
PR Close#33064
Component defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
`ngComponentDef` to `cmp`. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.
Note that the other "defs" (ngDirectiveDef, etc) will be
prefixed and shortened in follow-up PRs, in an attempt to
limit how large and conflict-y this change is.
PR Close#33088
For v9 we want the migration to the new i18n to be as
simple as possible.
Previously the developer had to positively choose to use
legacy messsage id support in the case that their translation
files had not been migrated to the new format by setting the
`legacyMessageIdFormat` option in tsconfig.json to the format
of their translation files.
Now this setting has been changed to `enableI18nLegacyMessageFormat`
as is a boolean that defaults to `true`. The format is then read from
the `i18nInFormat` option, which was previously used to trigger translations
in the pre-ivy angular compiler.
PR Close#33053
Currently Ivy stores the element attributes into an array above the component def and passes it into the relevant instructions, however the problem is that upon minification the array will get a unique name which won't compress very well. These changes move the attributes array into the component def and pass in the index into the instructions instead.
Before:
```
const _c0 = ['foo', 'bar'];
SomeComp.ngComponentDef = defineComponent({
template: function() {
element(0, 'div', _c0);
}
});
```
After:
```
SomeComp.ngComponentDef = defineComponent({
consts: [['foo', 'bar']],
template: function() {
element(0, 'div', 0);
}
});
```
A couple of cases that this PR doesn't handle:
* Template references are still in a separate array.
* i18n attributes are still in a separate array.
PR Close#32798
The `$localize` library uses a new message digest function for
computing message ids. This means that translations in legacy
translation files will no longer match the message ids in the code
and so will not be translated.
This commit adds the ability to specify the format of your legacy
translation files, so that the appropriate message id can be rendered
in the `$localize` tagged strings. This results in larger code size
and requires that all translations are in the legacy format.
Going forward the developer should migrate their translation files
to use the new message id format.
PR Close#32937
In an attempt to be compatible with previous translation files
the Angular compiler was generating instructions that always
included the message id. This was because it was not possible
to accurately re-generate the id from the calls to `$localize()` alone.
In line with https://hackmd.io/EQF4_-atSXK4XWg8eAha2g this
commit changes the compiler so that it only renders ids if they are
"custom" ones provided by the template author.
NOTE:
When translating messages generated by the Angular compiler
from i18n tags in templates, the `$localize.translate()` function
will compute message ids, if no custom id is provided, using a
common digest function that only relies upon the information
available in the `$localize()` calls.
This computed message id will not be the same as the message
ids stored in legacy translation files. Such files will need to be
migrated to use the new common digest function.
This only affects developers who have been trialling `$localize`, have
been calling `loadTranslations()`, and are not exclusively using custom
ids in their templates.
PR Close#32867
Metadata blocks are delimited by colons. Previously the code naively just
looked for the next colon in the string as the end marker.
This commit supports escaping colons within the metadata content.
The Angular compiler has been updated to add escaping as required.
PR Close#32867
With #31953 we moved the factories for components, directives and pipes into a new field called `ngFactoryDef`, however I decided not to do it for injectables, because they needed some extra logic. These changes set up the `ngFactoryDef` for injectables as well.
For reference, the extra logic mentioned above is that for injectables we have two code paths:
1. For injectables that don't configure how they should be instantiated, we create a `factory` that proxies to `ngFactoryDef`:
```
// Source
@Injectable()
class Service {}
// Output
class Service {
static ngInjectableDef = defineInjectable({
factory: () => Service.ngFactoryFn(),
});
static ngFactoryFn: (t) => new (t || Service)();
}
```
2. For injectables that do configure how they're created, we keep the `ngFactoryDef` and generate the factory based on the metadata:
```
// Source
@Injectable({
useValue: DEFAULT_IMPL,
})
class Service {}
// Output
export class Service {
static ngInjectableDef = defineInjectable({
factory: () => DEFAULT_IMPL,
});
static ngFactoryFn: (t) => new (t || Service)();
}
```
PR Close#32433
Prior to this commit, the `ngProjectAs` attribute was only included with a special flag and in a parsed format. As a result, projected node was missing `ngProjectAs` attribute as well as other attributes added after `ngProjectAs` one. This is problematic since app code might rely on the presence of `ngProjectAs` attribute (for example in CSS). This commit fixes the problem by including `ngProjectAs` into attributes array as a regular attribute and also makes sure that the parsed version of the `ngProjectAs` attribute with a special marker is added after regular attributes (thus we set them correctly at runtime). This change also aligns View Engine and Ivy behavior.
PR Close#32784
Now that the `$localize` translations are `MessageId` based the
compiler must render `MessageId`s in its generated `$localize` code.
This is because the `MessageId` used by the compiler is computed
from information that does not get passed through to the `$localize`
tagged string.
For example, the generated code for the following template
```html
<div id="static" i18n-title="m|d" title="introduction"></div>
```
will contain these localization statements
```ts
if (ngI18nClosureMode) {
/**
* @desc d
* @meaning m
*/
const MSG_EXTERNAL_8809028065680254561$$APP_SPEC_TS_1 = goog.getMsg("introduction");
I18N_1 = MSG_EXTERNAL_8809028065680254561$$APP_SPEC_TS_1;
}
else {
I18N_1 = $localize \`:m|d@@8809028065680254561:introduction\`;
}
```
Since `$localize` is not able to accurately regenerate the source-message
(and so the `MessageId`) from the generated code, it must rely upon the
`MessageId` being provided explicitly in the generated code.
The compiler now prepends all localized messages with a "metadata block"
containing the id (and the meaning and description if defined).
Note that this metadata block will also allow translation file extraction
from the compiled code - rather than relying on the legacy ViewEngine
extraction code. (This will be implemented post-v9).
Although these metadata blocks add to the initial code size, compile-time
inlining will completely remove these strings and so will not impact on
production bundle size.
PR Close#32594
This patch is a final major refactor in styling Angular.
This PR includes three main fixes:
All temporary state taht is persisted between template style/class application
and style/class application in host bindings is now removed.
Removes the styling() and stylingApply() instructions.
Introduces a "direct apply" mode that is used apply prop-based
style/class in the event that there are no map-based bindings as
well as property collisions.
PR Close#32259
PR Close#32591
If an <ng-template> contains a structural directive (for example *ngIf), Ngtsc generates extra template function with 1 template instruction call. When <ng-template> tag also contains i18n attribute on it, we generate i18nStart and i18nEnd instructions around it, which is unnecessary and breaking runtime. This commit adds a logic to make sure we do not generate i18n instructions in case only `template` is present.
PR Close#32623
This patch is a final major refactor in styling Angular.
This PR includes three main fixes:
All temporary state taht is persisted between template style/class application
and style/class application in host bindings is now removed.
Removes the styling() and stylingApply() instructions.
Introduces a "direct apply" mode that is used apply prop-based
style/class in the event that there are no map-based bindings as
well as property collisions.
PR Close#32259
PR Close#32596
This patch is a final major refactor in styling Angular.
This PR includes three main fixes:
All temporary state taht is persisted between template style/class application
and style/class application in host bindings is now removed.
Removes the styling() and stylingApply() instructions.
Introduces a "direct apply" mode that is used apply prop-based
style/class in the event that there are no map-based bindings as
well as property collisions.
PR Close#32259
Replaces the `select` instruction with a new one called `advance`. Instead of the jumping to a specific index, the new instruction goes forward X amount of elements. The advantage of doing this is that it should generate code the compresses better.
PR Close#32516
The `goog.getMsg()` function requires placeholder names to be camelCased.
This is not the case for `$localize`. Here placeholder names need
match what is serialized to translation files.
Specifically such placeholder names keep their casing but have all characters
that are not in `a-z`, `A-Z`, `0-9` and `_` converted to `_`.
PR Close#32509
Prior to this change, the template source mapping details were always
built during the analysis phase, under the assumption that pre-analysed
templates would always correspond with external templates. This has
turned out to be a false assumption, as inline templates are also
pre-analyzed to be able to preload any stylesheets included in the
template.
This commit fixes the bug by capturing the template source mapping
details at the moment the template is parsed, which is either during the
preanalysis phase when preloading is available, or during the analysis
phase when preloading is not supported.
Tests have been added to exercise the template error mapping in
asynchronous compilations where preloading is enabled, similar to how
the CLI performs compilations.
Fixes#32538
PR Close#32544
Prior to this commit, complex expressions (that require additional statements to be generated) were handled incorrectly in case they were used in attributes annotated with i18n flags. The problem was caused by the fact that extra statements were not appended to the temporary vars block, so they were missing in generated code. This commit updated the logic to use the `convertPropertyBinding`, which contains the necessary code to append extra statements. The `convertExpressionBinding` function was removed as it duplicates the `convertPropertyBinding` one (for the most part) and is no longer used.
PR Close#32309
Previously the template compiler would generate the same jsdoc comment
block for `$localize` as for `goog.getMsg()`. But it turns out that
the closure compiler will complain if the `@desc` and `@meaning`
tags are used for non-`getMsg()` calls.
For now we do not generate the comments for `$localize` calls. They are
not being used at the moment.
In the future it would be good to be able to extract the descriptions and
meanings from the `$localize` calls rather than relying upon the `getMsg()`
calls, which we do now. So we need to find a workaround for this constraint.
PR Close#32473
This commit changes the Angular compiler (ivy-only) to generate `$localize`
tagged strings for component templates that use `i18n` attributes.
BREAKING CHANGE
Since `$localize` is a global function, it must be included in any applications
that use i18n. This is achieved by importing the `@angular/localize` package
into an appropriate bundle, where it will be executed before the renderer
needs to call `$localize`. For CLI based projects, this is best done in
the `polyfills.ts` file.
```ts
import '@angular/localize';
```
For non-CLI applications this could be added as a script to the index.html
file or another suitable script file.
PR Close#31609
Reworks the compiler to output the factories for directives, components and pipes under a new static field called `ngFactoryFn`, instead of the usual `factory` property in their respective defs. This should eventually allow us to inject any kind of decorated class (e.g. a pipe).
**Note:** these changes are the first part of the refactor and they don't include injectables. I decided to leave injectables for a follow-up PR, because there's some more cases we need to handle when it comes to their factories. Furthermore, directives, components and pipes make up most of the compiler output tests that need to be refactored and it'll make follow-up PRs easier to review if the tests are cleaned up now.
This is part of the larger refactor for FW-1468.
PR Close#31953
In ngc is was valid to set the "flatModuleOutFile" option to "null". This is sometimes
necessary if a tsconfig extends from another one but the "fatModuleOutFile" option
needs to be unset (note that "undefined" does not exist as value in JSON)
Now if ngtsc is used to compile the project, ngtsc will fail with an error because it
tries to do string manipulation on the "flatModuleOutFile". This happens because
ngtsc only skips flat module indices if the option is set to "undefined".
Since this is not compatible with what was supported in ngc and such exceptions
should be avoided, the flat module check is now aligned with ngc.
```
TypeError: Cannot read property 'replace' of null
at Object.normalizeSeparators (/home/circleci/project/node_modules/@angular/compiler-cli/src/ngtsc/util/src/path.js:35:21)
at new NgtscProgram (/home/circleci/project/node_modules/@angular/compiler-cli/src/ngtsc/program.js:126:52)
```
Additionally setting the `flatModuleOutFile` option to an empty string
currently results in unexpected behavior. No errors is thrown, but the
flat module index file will be `.ts` (no file name; just extension).
This is now also fixed by treating an empty string similarly to
`null`.
PR Close#32235
Previously, ngtsc attempted to use the .d.ts schema for HTML elements to
check bindings to DOM properties. However, the TypeScript lib.dom.d.ts
schema does not perfectly align with the Angular DomElementSchemaRegistry,
and these inconsistencies would cause issues in apps. There is also the
concern of supporting both CUSTOM_ELEMENTS_SCHEMA and NO_ERRORS_SCHEMA which
would have been very difficult to do in the existing system.
With this commit, the DomElementSchemaRegistry is employed in ngtsc to check
bindings to the DOM. Previous work on producing template diagnostics is used
to support generation of this different kind of error with the same high
quality of error message.
PR Close#32171
Historically, the Angular Compiler has produced both native TypeScript
diagnostics (called ts.Diagnostics) and its own internal Diagnostic format
(called an api.Diagnostic). This was done because TypeScript ts.Diagnostics
cannot be produced for files not in the ts.Program, and template type-
checking diagnostics are naturally produced for external .html template
files.
This design isn't optimal for several reasons:
1) Downstream tooling (such as the CLI) must support multiple formats of
diagnostics, adding to the maintenance burden.
2) ts.Diagnostics have gotten a lot better in recent releases, with support
for suggested changes, highlighting of the code in question, etc. None of
these changes have been of any benefit for api.Diagnostics, which have
continued to be reported in a very primitive fashion.
3) A future plugin model will not support anything but ts.Diagnostics, so
generating api.Diagnostics is a blocker for ngtsc-as-a-plugin.
4) The split complicates both the typings and the testing of ngtsc.
To fix this issue, this commit changes template type-checking to produce
ts.Diagnostics instead. Instead of reporting a special kind of diagnostic
for external template files, errors in a template are always reported in
a ts.Diagnostic that highlights the portion of the template which contains
the error. When this template text is distinct from the source .ts file
(for example, when the template is parsed from an external resource file),
additional contextual information links the error back to the originating
component.
A template error can thus be reported in 3 separate ways, depending on how
the template was configured:
1) For inline template strings which can be directly mapped to offsets in
the TS code, ts.Diagnostics point to real ranges in the source.
This is the case if an inline template is used with a string literal or a
"no-substitution" string. For example:
```typescript
@Component({..., template: `
<p>Bar: {{baz}}</p>
`})
export class TestCmp {
bar: string;
}
```
The above template contains an error (no 'baz' property of `TestCmp`). The
error produced by TS will look like:
```
<p>Bar: {{baz}}</p>
~~~
test.ts:2:11 - error TS2339: Property 'baz' does not exist on type 'TestCmp'. Did you mean 'bar'?
```
2) For template strings which cannot be directly mapped to offsets in the
TS code, a logical offset into the template string will be included in
the error message. For example:
```typescript
const SOME_TEMPLATE = '<p>Bar: {{baz}}</p>';
@Component({..., template: SOME_TEMPLATE})
export class TestCmp {
bar: string;
}
```
Because the template is a reference to another variable and is not an
inline string constant, the compiler will not be able to use "absolute"
positions when parsing the template. As a result, errors will report logical
offsets into the template string:
```
<p>Bar: {{baz}}</p>
~~~
test.ts (TestCmp template):2:15 - error TS2339: Property 'baz' does not exist on type 'TestCmp'.
test.ts:3:28
@Component({..., template: TEMPLATE})
~~~~~~~~
Error occurs in the template of component TestCmp.
```
This error message uses logical offsets into the template string, and also
gives a reference to the `TEMPLATE` expression from which the template was
parsed. This helps in locating the component which contains the error.
3) For external templates (templateUrl), the error message is delivered
within the HTML template file (testcmp.html) instead, and additional
information contextualizes the error on the templateUrl expression from
which the template file was determined:
```
<p>Bar: {{baz}}</p>
~~~
testcmp.html:2:15 - error TS2339: Property 'baz' does not exist on type 'TestCmp'.
test.ts:10:31
@Component({..., templateUrl: './testcmp.html'})
~~~~~~~~~~~~~~~~
Error occurs in the template of component TestCmp.
```
PR Close#31952
This commit switches the default value of the enableIvy flag to true.
Applications that run ngc will now by default receive an Ivy build!
This does not affect the way Bazel builds in the Angular repo work, since
those are still switched based on the value of the --define=compile flag.
Additionally, projects using @angular/bazel still use View Engine builds
by default.
Since most of the Angular repo tests are still written against View Engine
(particularly because we still publish VE packages to NPM), this switch
also requires lots of `enableIvy: false` flags in tsconfigs throughout the
repo.
Congrats to the team for reaching this milestone!
PR Close#32219
In Angular today, the following pattern works:
```typescript
export class BaseDir {
constructor(@Inject(ViewContainerRef) protected vcr: ViewContainerRef) {}
}
@Directive({
selector: '[child]',
})
export class ChildDir extends BaseDir {
// constructor inherited from BaseDir
}
```
A decorated child class can inherit a constructor from an undecorated base
class, so long as the base class has metadata of its own (for JIT mode).
This pattern works regardless of metadata in AOT.
In Angular Ivy, this pattern does not work: without the @Directive
annotation identifying the base class as a directive, information about its
constructor parameters will not be captured by the Ivy compiler. This is a
result of Ivy's locality principle, which is the basis behind a number of
compilation optimizations.
As a solution, @Directive() without a selector will be interpreted as a
"directive base class" annotation. Such a directive cannot be declared in an
NgModule, but can be inherited from. To implement this, a few changes are
made to the ngc compiler:
* the error for a selector-less directive is now generated when an NgModule
declaring it is processed, not when the directive itself is processed.
* selector-less directives are not tracked along with other directives in
the compiler, preventing other errors (like their absence in an NgModule)
from being generated from them.
PR Close#31379
The language service relies on a "context" file that is used as the
canonical "containing file" when performing module resolution.
This file is unnecessary since the language service host's current
directory always default to the location of tsconfig.json for the
project, which would give the correct result.
This refactoring allows us to simplify the "typescript host" and also
removes the need for custom logic to find tsconfig.json.
PR Close#32015
Similar to interpolation, we do not want to completely remove whitespace
nodes that are siblings of an expansion.
For example, the following template
```html
<div>
<strong>items left<strong> {count, plural, =1 {item} other {items}}
</div>
```
was being collapsed to
```html
<div><strong>items left<strong>{count, plural, =1 {item} other {items}}</div>
```
which results in the text looking like
```
items left4
```
instead it should be collapsed to
```html
<div><strong>items left<strong> {count, plural, =1 {item} other {items}}</div>
```
which results in the text looking like
```
items left 4
```
---
**Analysis of the code and manual testing has shown that this does not cause
the generated ids to change, so there is no breaking change here.**
PR Close#31962
Previously if only a component template changed then we would know to
rebuild its component source file. But the compilation was incorrect if the
component was part of an NgModule, since we were not capturing the
compilation scope information that had a been acquired from the NgModule
and was not being regenerated since we were not needing to recompile
the NgModule.
Now we register compilation scope information for each component, via the
`ComponentScopeRegistry` interface, so that it is available for incremental
compilation.
The `ComponentDecoratorHandler` now reads the compilation scope from a
`ComponentScopeReader` interface which is implemented as a compound
reader composed of the original `LocalModuleScopeRegistry` and the
`IncrementalState`.
Fixes#31654
PR Close#31932
In Angular today, the following pattern works:
```typescript
export class BaseDir {
constructor(@Inject(ViewContainerRef) protected vcr: ViewContainerRef) {}
}
@Directive({
selector: '[child]',
})
export class ChildDir extends BaseDir {
// constructor inherited from BaseDir
}
```
A decorated child class can inherit a constructor from an undecorated base
class, so long as the base class has metadata of its own (for JIT mode).
This pattern works regardless of metadata in AOT.
In Angular Ivy, this pattern does not work: without the @Directive
annotation identifying the base class as a directive, information about its
constructor parameters will not be captured by the Ivy compiler. This is a
result of Ivy's locality principle, which is the basis behind a number of
compilation optimizations.
As a solution, @Directive() without a selector will be interpreted as a
"directive base class" annotation. Such a directive cannot be declared in an
NgModule, but can be inherited from. To implement this, a few changes are
made to the ngc compiler:
* the error for a selector-less directive is now generated when an NgModule
declaring it is processed, not when the directive itself is processed.
* selector-less directives are not tracked along with other directives in
the compiler, preventing other errors (like their absence in an NgModule)
from being generated from them.
PR Close#31379
Adds support for indexing template referenecs, variables, and property
and method calls inside bound attributes and bound events. This is
mostly an extension of the existing indexing infrastructure.
PR Close#31535
Currently we always generate the `read` parameter for the view and content query instructions, however since most of the time the `read` parameter won't be set, we'll end up generating `null` which adds 5 bytes for each query when minified. These changes make it so that the `read` parameter only gets generated if it has a value.
PR Close#31667
When injecting a `ChangeDetectorRef` into a pipe, the expected result is that the ref will be tied to the component in which the pipe is being used. This works for most cases, however when a pipe is used inside a property binding of a component (see test case as an example), the current `TNode` is pointing to component's host so we end up injecting the inner component's view. These changes fix the issue by only looking up the component view of the `TNode` if the `TNode` is a parent.
This PR resolves FW-1419.
PR Close#31438
We currently have a handwritten version of the Ivy directive def for NgClass so
we can switch between Ivy and View Engine behavior. This generated code needs to
be kept up-to-date with what the Ivy compiler generates.
PR 30742 recently changed `classMap` such that it now requires allocation of
host binding slots. This means that the `allocHostVars()` function must be
called in the NgClass directive def to match compiler output, but the
handwritten directive def was not updated. This caused a bug where NgClass
was inappropriately overwriting data for other directives because space was
not allocated for its values.
PR Close#31788
This commit is the final patch of the ivy styling algorithm refactor.
This patch swaps functionality from the old styling mechanism to the
new refactored code by changing the instruction code the compiler
generates and by pointing the runtime instruction code to the new
styling algorithm.
PR Close#30742
Versions of CLI prior to angular/angular-cli@0e339ee did not expose the host.getModifiedResourceFiles() method.
This meant that null was being passed through to the IncrementalState.reconcile() method
to indicate that there were either no changes or the host didn't support that method.
This commit fixes a bug where we were checking for undefined rather than null when
deciding whether any resource files had changed, causing a null reference error to be thrown.
This bug was not caught by the unit testing because the tests set up the changed files
via a slightly different process, not having access to the CompilerHost, and these test
were making the erroneous assumption that undefined indicated that there were no
changed files.
PR Close#31322
Fixes all TypeScript failures caused by enabling the `--strict`
flag for test source files. We also want to enable the strict
options for tests as the strictness enforcement improves the
overall codehealth, unveiled common issues and additionally it
allows us to enable `strict` in the `tsconfig.json` that is picked
up by IDE's.
PR Close#30993
Fixes Ivy matching directives against attribute bindings (e.g. `[attr.some-directive]="foo"`). Works by excluding attribute bindings from the attributes array during compilation. This has the added benefit of generating less code.
**Note:** My initial approach to implementing this was to have a different marker for attribute bindings so that they can be ignored when matching directives, however as I was implementing it I realized that the attributes in that array were only used for directive matching (as far as I could tell). I decided to drop the attribute bindings completely, because it results in less generated code.
PR Close#31541
Currently we reuse the same instruction both for regular property bindings and property bindings on the `host`. The only difference between the two is that when it's on the host we shouldn't support inputs. We have an optional parameter called `nativeOnly` which is used to differentiate the two, however since `nativeOnly` is preceeded by another optional parameter (`sanitizer`), we have to generate two extra parameters for each host property bindings every time (e.g. `property('someProp', 'someValue', null, true)`).
These changes add a new instruction called `hostProperty` which avoids the need for the two parameters by removing `nativeOnly` which is always set and it allows us to omit `sanitizer` when it isn't being used.
These changes also remove the `nativeOnly` parameter from the `updateSyntheticHostBinding` instruction, because it's only generated for host elements which means that we can assume that its value will always be `true`.
PR Close#31550
Add support for indexing elements in the indexing module.
Opening and self-closing HTML tags have their selector indexed, as well
as the attributes on the element and the directives applied to an
element.
PR Close#31240
Prior to this fix, the logic to set the right placeholder format for ICUs was a bit incorrect: if there was a nested ICU in one of the root ICU cases, that led to a problem where placeholders in subsequent branches used the wrong ({$placeholder}) format instead of {PLACEHOLDER} one. This commit updates the logic to make sure we properly transform all placeholders even if nested ICUs are present.
PR Close#31516
Previously, resource paths beginning with '/' (aka "rooted" paths, which
are not actually absolute filesystem paths, but are relative to the
TypeScript project root directory) were not handled correctly. The leading
'/' was stripped and the path was resolved as if it was relative, but with
no containing file for context. This led to resources in different rootDirs
not being found.
Instead, such rooted paths are now resolved without TypeScript's help, by
checking each root directory. A test is added to this effect.
PR Close#31511
Since `goog.getMsg` does not process ICUs (post-processing is required via goog.i18n.MessageFormat, https://google.github.io/closure-library/api/goog.i18n.MessageFormat.html) and placeholder format used for ICUs and regular messages inside `goog.getMsg` are different, the current implementation (that assumed the same placeholder format) needs to be updated. This commit updates placeholder format used inside ICUs from `{$placeholder}` to `{PLACEHOLDER}` to better align with Closure. ICU placeholders (that were left as is prior to this commit) are now replaced with actual values in post-processing step (inside `i18nPostprocess`).
PR Close#31459
This commit adds a test that verifies no translations are generated for bound attributes and also checks (as a part of the `verify` function) that VE and Ivy handle this case the same way.
PR Close#31481
Adds a new `elementContainer` instruction that can be used to avoid two instruction (`elementContainerStart` and `elementContainerEnd`) for `ng-container` that has text-only content. This is particularly useful when we have `ng-container` inside i18n sections.
This PR resolves FW-1105.
PR Close#31444
The ngcc tool adds namespaced imports to files when compiling. The ngtsc
tooling was not processing types correctly when they were imported via
such namespaces. For example:
```
export declare class SomeModule {
static withOptions(...): ModuleWithProviders<ɵngcc1.BaseModule>;
```
In this case the `BaseModule` was being incorrectly attributed to coming
from the current module rather than the imported module, represented by
`ɵngcc1`.
Fixes#31342
PR Close#31367
Adds the new `classMapInterpolate1` through `classMapInterpolate8` instructions which handle interpolations inside the `class` attribute and moves the interpolation logic internally. This allows us to remove the `interpolationX` instructions in a follow-up PR.
These changes also add an error if an interpolation is encountered inside a `style` tag (e.g. `style="width: {{value}}"`). Up until now this would actually generate valid instructions, because `styleMap` goes through the same code path as `classMap` which does support interpolation. At runtime, however, `styleMap` would set invalid styles that look like `<div style="0:w;1:i;2:d;3:t;4:h;5::;7:1;">`. In `ViewEngine` interpolations inside `style` weren't supported either, however there we'd output invalid styles like `<div style="unsafe">`, even if the content was trusted.
PR Close#31211
When a class uses Angular decorators such as `@Input`, `@Output` and
friends without an Angular class decorator, they are compiled into a
static `ngBaseDef` field on the class, with the TypeScript declaration
of the class being altered to declare the `ngBaseDef` field to be of type
`ɵɵBaseDef`. This type however requires a generic type parameter that
corresponds with the type of the class, however the compiler did not
provide this type parameter. As a result, compiling a program where such
invalid `ngBaseDef` declarations are present will result in compilation
errors.
This commit fixes the problem by providing the generic type parameter.
Fixes#31160
PR Close#31210
Adds chaining to the `property`, `attribute` and `updateSyntheticHostBinding` instructions when they're used in a host binding.
This PR resolves FW-1404.
PR Close#31296
To improve cross platform support, all file access (and path manipulation)
is now done through a well known interface (`FileSystem`).
For testing a number of `MockFileSystem` implementations are provided.
These provide an in-memory file-system which emulates operating systems
like OS/X, Unix and Windows.
The current file system is always available via the static method,
`FileSystem.getFileSystem()`. This is also used by a number of static
methods on `AbsoluteFsPath` and `PathSegment`, to avoid having to pass
`FileSystem` objects around all the time. The result of this is that one
must be careful to ensure that the file-system has been initialized before
using any of these static methods. To prevent this happening accidentally
the current file system always starts out as an instance of `InvalidFileSystem`,
which will throw an error if any of its methods are called.
You can set the current file-system by calling `FileSystem.setFileSystem()`.
During testing you can call the helper function `initMockFileSystem(os)`
which takes a string name of the OS to emulate, and will also monkey-patch
aspects of the TypeScript library to ensure that TS is also using the
current file-system.
Finally there is the `NgtscCompilerHost` to be used for any TypeScript
compilation, which uses a given file-system.
All tests that interact with the file-system should be tested against each
of the mock file-systems. A series of helpers have been provided to support
such tests:
* `runInEachFileSystem()` - wrap your tests in this helper to run all the
wrapped tests in each of the mock file-systems.
* `addTestFilesToFileSystem()` - use this to add files and their contents
to the mock file system for testing.
* `loadTestFilesFromDisk()` - use this to load a mirror image of files on
disk into the in-memory mock file-system.
* `loadFakeCore()` - use this to load a fake version of `@angular/core`
into the mock file-system.
All ngcc and ngtsc source and tests now use this virtual file-system setup.
PR Close#30921
Prior to this commit, the logic to extract query information from class fields used an instance of regular Error class to throw an error. As a result, some useful information (like reference to a specific field) was missing. Replacing Error class with FatalDiagnosticError one makes the error more verbose that should simplify debugging.
PR Close#31123
Add an IndexingContext class to store indexing information and a
transformer module to generate indexing analysis. Integrate the indexing
module with the rest of NgtscProgram and add integration tests.
Closes#30959
PR Close#31151
Optimizations to skip compiling source files that had not changed
did not account for the case where only a resource file changes,
such as an external template or style file.
Now we track such dependencies and trigger a recompilation
if any of the previously tracked resources have changed.
This will require a change on the CLI side to provide the list of
resource files that changed to trigger the current compilation by
implementing `CompilerHost.getModifiedResourceFiles()`.
Closes#30947
PR Close#30954
A temporary check is in place to determine whether a key in an object
literal needs to be quoted during emit. Previously, only the presence of
a dash caused a key to become quoted, this however is not sufficient for
@angular/flex-layout to compile properly as it has dots in its inputs.
This commit extends the check to also use quotes when a dot is present.
Fixes#30114
PR Close#31146
Currently each property binding generates an instruction like this:
```
property('prop1', ctx.value1);
property('prop2', ctx.value2);
```
The problem is that we're repeating the call to `property` for each of the properties. Since the `property` instruction returns itself, we can chain all of the calls which is more compact and it looks like this:
```
property('prop1', ctx.value1)('prop2', ctx.value2);
```
These changes implement the chaining behavior for regular property bindings and for synthetic ones, however interpolated ones are still handled like before, because they use a separate instruction.
This PR resolves FW-1389.
PR Close#31078
i18nExp now uses `bind` internally rather than having the compiler generate it in order to bring it in line with other functions like `textBinding` & `property`.
FW-1384 #resolve
PR Close#31089
Commit 58be2ff884 has been created
before c0386757b1 landed, and therefore
the newly created compliance test was using an outdated expectation.
This commit updates the compliance test to no longer contain
the outdated expectation.
PR Close#30983
To provide some context: The implicit receiver is part of the
parsed Angular template AST. Any property reads in bindings,
interpolations etc. read from a given object (usually the component
instance). In that case there is an _implicit_ receiver which can also
be specified explicitly by just using `this`.
e.g.
```html
<ng-template>{{this.myProperty}}</ng-template>
```
This works as expected in Ivy and View Engine, but breaks in case the
implicit receiver is not used for property reads. For example:
```html
<my-dir [myFn]="greetFn.bind(this)"></my-dir>
```
In that case the `this` will not be properly translated into the generated
template function code because the Ivy compiler currently always treats
the `ctx` variable as the implicit receiver. This is **not correct** and breaks
compatibility with View Engine. Rather we need to ensure that we retrieve
the root context for the standalone implicit receiver similar to how it works
for property reads (as seen in the example above with `this.myProperty`)
Note that this requires some small changes to the `expression_converter`
because we only want to generate the `eenextContent()` instruction if the
implicit receiver is _actually_ used/needed. View Engine determines if that is the case by recursively walking through the converted output AST and
checking for usages of the `o.variable('_co')` variable ([see here][ve_check]). This would work too for Ivy, but involves most likely more code duplication
since templates are isolated in different functions and it another pass
through the output AST for every template expression.
[ve_check]: 0d6c9d36a1/packages/compiler/src/view_compiler/view_compiler.ts (L206-L208)
Resolves FW-1366.
PR Close#30897
- Refactors compiler to stop generating `ɵɵselect(0)` instructions
- Alters template execution to always call the equivalent of `ɵɵselect(0)` before running a template in update mode
- Updates tests to not check for or call `ɵɵselect(0)`.
The goal here is to reduce the size of generated templates
PR Close#30830
Fixes Ivy throwing an error if it runs into an empty property binding on an `ng-template` (e.g. `<ng-template [something]=""></ng-template>`) by not generating an update instruction for it.
Fixes#30801.
This PR resoves FW-1356.
PR Close#30829
- Removes ɵɵelementProperty instruction
- Updates tests that were using it
- NOTE: There is one test under `render3/integration_spec.ts` that is commented out, and needs to be reviewed. Basically, I could not find a good why to test what it was doing, because it was doing things that I am not sure we could generate in an acceptance test.
PR Close#30645
With View engine it was possible to declare multiple projection
definitions and to programmatically project nodes into the slots.
e.g.
```html
<ng-content></ng-content>
<ng-content></ng-content>
```
Using `ViewContainerRef#createComponent` allowed projecting
nodes into one of the projection defs (through index)
This no longer works with Ivy as the `projectionDef` instruction only
retrieves a list of selectors instead of also retrieving entries for
reserved projection slots which appear when using the default
selector multiple times (as seen above).
In order to fix this issue, the Ivy compiler now passes all
projection slots to the `projectionDef` instruction. Meaning that
there can be multiple projection slots with the same wildcard
selector. This allows multi-slot projection as seen in the
example above, and it also allows us to match the multi-slot node
projection order from View Engine (to avoid breaking changes).
It basically ensures that Ivy fully matches the View Engine behavior
except of a very small edge case that has already been discussed
in FW-886 (with the conclusion of working as intended).
Read more here: https://hackmd.io/s/Sy2kQlgTE
PR Close#30561
`i18nAttributes` instructions always occur after the element instruction. This means that we need to treat `i18n-` attributes differently.
By defining a specific `AttributeMarker` we can ensure that we won't trigger directive inputs with untranslated attribute values.
FW-1332 #resolve
PR Close#30402
Changed runtime i18n to define attributes with bindings, or matching directive inputs/outputs as element properties as we are supposed to do in Angular.
This PR fixes the issue where directive inputs wouldn't be trigged.
FW-1315 #resolve
PR Close#30402
The R3TargetBinder "binds" an Angular template AST, computing semantic
information regarding the template and making it accessible.
One of the binding passes previously had a bug, where for the following
template:
<div *ngIf="foo as foo"></div>
which desugars to:
<ng-template ngIf [ngIf]="foo" let-foo="ngIf">
<div></div>
</ng-template>
would have the `[ngIf]` binding processed twice - in both the scope which
contains the `<ng-template>` and the scope inside the template. The bug
arises because during the latter, `foo` is a variable defined by `let-foo`,
and so the R3TargetBinder would incorrectly learn that `foo` inside `[ngIf]`
maps to that variable.
This commit fixes the bug by only processing inputs, outputs, and
templateAttrs from `Template`s in the outer scope.
PR Close#30669
Prior to this commit there were no explicit types setup for NgModuleFactory calls in ngfactories, so TypeScript inferred the type based on a given call. In some cases (when generic types were used for Components/Directives) that turned out to be problematic, so we add explicit typing for NgModuleFactory calls.
PR Close#30708
This patch is one of the final patches to refactor the styling algorithm
to be more efficient, performant and less complex.
This patch enables sanitization support for map-based and prop-based
style bindings.
PR Close#30667
Prior to this change we processed binding expression (including bindings with pipes) in i18n attributes before we generate update instruction. As a result, slot offsets for pipeBind instructions were calculated incorrectly. Now we perform binding expression processing when we generate "update block" instructions, so offsets are calculated correctly.
PR Close#30573
Currently the `@angular/compiler-cli` compliance tests sometimes do
not throw an exception if the expected output does not match the
generated JavaScript output. This can happen for the following cases:
1. Expected code includes character that is not part of known alphabet
(e.g. `Δ` is still used in a new compliance test after rebasing a PR)
2. Expected code asserts that a string literal matches a string with
escaped quotes. e.g. expects `const $var$ = "\"quoted\"";`)
PR Close#30597
There is an encoding issue with using delta `Δ`, where the browser will attempt to detect the file encoding if the character set is not explicitly declared on a `<script/>` tag, and Chrome will find the `Δ` character and decide it is window-1252 encoding, which misinterprets the `Δ` character to be some other character that is not a valid JS identifier character
So back to the frog eyes we go.
```
__
/ɵɵ\
( -- ) - I am ineffable. I am forever.
_/ \_
/ \ / \
== == ==
```
PR Close#30546
Previously we defensively wrapped expressions in case they ran afoul of
precedence rules. For example, it would be easy to create the TS AST structure
Call(Ternary(a, b, c)), but might result in printed code of:
```
a ? b : c()
```
Whereas the actual structure we meant to generate is:
```
(a ? b : c)()
```
However the TypeScript renderer appears to be clever enough to provide
parenthesis as necessary.
This commit removes these defensive paraenthesis in the cases of binary
and ternary operations.
FW-1273
PR Close#30349
JoostK
Andrius
Kara Erickson
Pete Bacon Darwin
crisbeto
Andrew Kushnir
Matias Niemelä
Paul Gschwendtner
Alex Rickabaugh
Alan
atscott
Keen Yee Liau
Igor Minar
Ayaz Hafiz
Matt Lewis
Jon Wallsten
George Kalpakas
Olivier Combe
Alex Eagle
Ben Lesh
janith