Currently the static-query migration ignores queries declared on getters
or setters as these are not part of a `PropertyDeclaration`. We need to
handle these queries in order to cover all queries within a given project.
The usage strategy is not able to detect timing for queries on accessors,
so we add a TODO and print a message. The template strategy is able
to detect the proper timing for such queries because it's not dependent
on detecting the usage of the query.
Resolves FW-1215
PR Close#30327
We have an issue where we would like to be able to test perf counter metrics in acceptance tests, but we are unable to do so, because it will break when those same tests are run with ViewEngine. This PR adds a testing utility to `onlyInIvy` that allows for testing of performance counters, and even gives readable errors for what value on `ngDevMode` is incorrect. Has typings for decent autocompletion as well.
PR Close#30339
This is the final patch to migrate the Angular styling code to have a
smaller instruction set in preparation for the runtime refactor. All
styling-related instructions now work both in template and hostBindings
functions and do not use `element` as a prefix for their names:
BEFORE:
elementStyling()
elementStyleProp()
elementClassProp()
elementStyleMap()
elementClassMap()
elementStylingApply()
AFTER:
styling()
styleProp()
classProp()
styleMap()
classMap()
stylingApply()
PR Close#30318
This patch removes all host-specific styling instructions in favor of
using element-level instructions instead. Because of the previous
patches that made sure `select(n)` worked between styling calls, all
host level instructions are not needed anymore. This patch changes each
of those instruction calls to use any of the `elementStyling*`,
`elementStyle*` and `elementClass*` styling instructions instead.
PR Close#30336
The static-query template strategy leverages the AOT compiler
in order to determine the query timing. Unfortunately the AOT
compiler has open bugs that can cause unexpected failures which
make the template strategy unusable in rare cases. These rare
exceptions need to be handled gracefully in order to avoid confusion
and to provide a more smooth migration.
Additionally migration strategy setup failures are now reported with
stack traces as the `ng update` command does not print stack traces.
This makes it easier to reproduce and report migration issues.
PR Close#30269
In an Angular CLI project scenario where projects only reference
top-level source-files through the `tsconfig` `files` option, we currently
do not migrate referenced source-files. This can be fixed checking all
referenced source-files which aren't coming from an external library.
This is similar to how `tslint` determines project source-files.
PR Close#30269
Currently when someone has a call expression within the `ngOnInit` call
and we try to peek into that function with respect to the current function
context, the schematic errors because a call expression argument is
undefined. This is valid because the target function declaration defines
that parameter with a default value. In order to fix this, we need to
respect parameter default values.
PR Close#30269
Fixes not being able to bind a `SafeStyle` as a camel cased style property (e.g. `[style.backgroundImage]="someSafeStyle"`). The issue was due to the fact that we only check the dash case property names to determine whether to sanitize a value.
This PR resolves FW-1279.
PR Close#30328
572b54967c changed how the schematic
tests are executed. Tests no longer use the schematic collection
that is also used by the CLI `ng update` command and therefore
the migration collection could technically be invalid.
In order to ensure that the public migration collection is guaranteed
to work and to avoid duplication within two schematic collections, the
changes are partially reverted and only the disabled `injectable-pipe`
schematic has its own collection.
PR Close#30198
Currently we always prompt when the static-query migration runs. This is not
always needed because some applications do not even use `ViewChild` or
`ContentChild` queries and it just causes confusion if developers need to
decide on a migration strategy while there is nothing to migrate.
In order to avoid this confusion, we no longer prompt for a strategy
if there are no queries declared within the project.
PR Close#30254
This patch is one commit of many patches that will unify all styling instructions
across both template-level bindings and host-level bindings. This patch in particular
removes the `elementIndex` param because it is already set prior to each styling
instruction via the `select(n)` instruction.
PR Close#30313
Currently, in jit mode, `ngInjectableDef`, `ngDirectiveDef`, `ngPipeDef` and `ngModuleDef` use `ng://`,
which display them in the top domain in Chrome Dev Tools, whereas `ngComponentDef` uses `ng:///` which display components in a separate domain.
You can currently see:
```
AppModule
UserService
ng://
|_ AppComponent
|_ template.html
|_ AppComponent.js
...
```
This commits replaces all `ng://` with `ng:///` to display every Angular entity in the `ng://` domain.
```
ng://
|_ AppModule
|_ UserService
|_ AppComponent
...
```
PR Close#29826
This patch breaks up the existing `elementStylingMap` into
`elementClassMap` and `elementStyleMap` instructions. It also breaks
apart `hostStlyingMap` into `hostClassMap` and `hostStyleMap`
instructions. This change allows for better tree-shaking and reduces
the complexity of the styling algorithm code for `[style]` and `[class]`
bindings.
PR Close#30293
In the existing implementation the `elementPropertyInternal` function (meant to
set element properties) was executed even if a bound value didn't change. The
`elementPropertyInternal` was inspecting the incoming value and after comparing it
to `NO_CHANGE` - exiting early. All in all it meant that we were unnecessarily
invoking the `elementPropertyInternal` function for cases where bound value didn't
change.
Based on my bencharks (running change detection without any model update in a tight
loop) this unnecessary function call was causing ~5% slowdown in the change detection
process.
PR Close#30255
This commit fixes a regression introduced in PR 29692 where
the interpolate symbol in View Engine was improperly prefixed
with the ɵɵ that signifies private instructions for Ivy. It
resulted in interpolations of 10+ values not working correctly
in AOT mode. This commit removes the prefix.
PR Close#30243
Previously, `R3TestBedCompiler` was dynamically defining an
`@NgModule`-decorated `CompilerModule` class inside a method call.
Since ngcc only processes top-level classes, this class was not
transformed causing failures in unit tests (see #30121 for details).
This commit fixes it by using `compileNgModuleDefs()` directly (similar
to the fix in #30037).
Fixes#30121
PR Close#28530
Ivy uses R3Injector, but we are currently pulling in both the StaticInjector
(View Engine injector) and the R3Injector when running with Ivy. This commit
adds an ivy switch so calling Injector.create() pulls in the correct
implementation of the injector depending on whether you are using VE or Ivy.
This saves us about 3KB in the bundle.
PR Close#30219
Previously, we were supporting injection flags for provider deps, but only
if they fit the format `new Optional()`. This commit fixes resolution of
provider deps to also support `Optional` (without the new). This keeps us
backwards compatible with what View Engine supported.
PR Close#30216
Stores the views that are part of a container directly on the `LContainer`, rather than maintaining a dedicated sub-array.
This PR resolves FW-1288.
PR Close#30179
Currently, we are not properly resolving forward refs when they appear
in deps for providers created with the useFactory strategy. This commit
wraps provider deps in the resolveForwardRef call so the tokens are
passed into the inject function as expected.
PR Close#30201
Fixes `HostBinding` and `HostListener` declarations not being inherited from base classes that don't have an Angular decorator.
This PR resolves FW-1275.
PR Close#30158
Currently the `static-query` migrations fails at the final step of
updating a query when the query already specifies options which
cannot be transformed easily. e.g. the options are computed through
a function call: `@ViewChild(..., getQueryOpts());` or `@ViewChild(..., myOptionsVar)`.
In these cases we technically could add additionally logic to update
the query options, but given that this is an edge-case and it's
potentially over-engineering the migration schematic, we just
always add a TODO for the timing and print out the determined
query timing in the console. The developer in that case just needs
to manually update the logic for the query options to contain the
printed query timing.
Potentially related to: https://github.com/angular/angular-cli/issues/14298
PR Close#30178
Introduces a new Bazel test that allows us to inspect
what source-files contribute to a given bundled file
and how much bytes they contribute to the bundle size.
Additionally the size-tracking rule groups the size
data by directories. This allows us to compare size
changes in the scope of directories. e.g. a lot of
files in a directory could increase slightly in size, but
in the directory scope the size change could be significant
and needs to be reported by the test target.
Resolves FW-1278
PR Close#30070
Disables the injectable pipe migration until we can decide whether this is the right solution for Ivy. Rolling it out properly will involve a more detailed plan and more changes like updating the styleguide, scaffolding schematics etc.
Context for the new `test-migrations.json`: since we use the `migrations.json` both for the real migrations and for tests, it doesn't allow us to disable a schematic, but continue running its tests. This change adds the test-specific file so that we can continue running the `injectable-pipe` tests, even though the schematic itself is disabled.
PR Close#30180
Currently the injectable pipe schematic generates invalid imports like `import import { Pipe, PipeTransform, Injectable } from '@angular/core'; from '@angular/core';`. The issue wasn't caught by the unit tests, because the invalid import still contains the valid one.
Fixes#30159.
PR Close#30170
Fixes Ivy reflecting properties with `undefined` values, rather than omitting them. Also fixes that Ivy doesn't clear the reflected values when property value changes from something that is defined to undefined.
This PR resolves FW-1277.
PR Close#30103
Move tests for special tokens like `Injector`, `ElementRef`, `TemplateRef`, `ViewContainerRef`, `ChangeDectetorRef` and custom string tokens.
PR Close#29299
- Extracts and documents code that will be common to interpolation instructions
- Ensures that binding indices are updated at the proper time during compilation
- Adds additional tests
Related #30011
PR Close#30129
The proposed ES dynamic import() is now supported by the Angular CLI and the
larger toolchain. This renders the `loadChildren: string` API largely
redundant, as import() is far more natural, is less error-prone, and is
standards compliant. This commit deprecates the `string` form of
`loadChildren` in favor of dynamic import().
DEPRECATION:
When defining lazy-loaded route, Angular previously offered two options for
configuring the module to be loaded, both via the `loadChildren` parameter
of the route. Most Angular developers are familiar withthe `string` form of
this API. For example, the following route definition configures Angular to
load a `LazyModule` NgModule from `lazy-route/lazy.module.ts`:
```
[{
path: 'lazy',
loadChildren: 'lazy-route/lazy.module#LazyModule',
}]
```
This "magic string" configuration was previously necessary as there was
no dynamic module loading standard on the web. This has changed with the
pending standardization of dynamic `import()` expressions, which are now
supported in the Angular CLI and in web tooling in general. `import()`
offers a more natural and robust solution to dynamic module loading. The
above example can be rewritten to use dynamic `import()`:
```
[{
path: 'lazy',
loadChildren: () => import('./lazy-route/lazy.module').then(mod => mod.LazyModule),
}]
```
This form of lazy loading offers significant advantages in terms of:
* type checking via TypeScript
* simplicity of generated code
* future potential to run natively in supporting browsers
(see: [caniuse: dynamic import()](https://caniuse.com/#feat=es6-module-dynamic-import))
As a result, Angular is deprecating the `loadChildren: string` syntax in
favor of ES dynamic `import()`. An automatic migration will run during
`ng upgrade` to convert your existing Angular code to the new syntax.
PR Close#30073
The `renderStringify` function is used in a lot of performance-sensitive places, however it contains a megamorphic read which is used primarily for error messages. These changes introduce a new function that can be used to stringify output for errors and removes the megamorphic read from `renderStringify`.
This PR resolves FW-1286.
PR Close#30082
Fixes view and content queries not being inherited in Ivy, if the base class hasn't been annotated with an Angular decorator (e.g. `Component` or `Directive`).
Also reworks the way the `ngBaseDef` is created so that it is added at the same point as the queries, rather than inside of the `Input` and `Output` decorators.
This PR partially resolves FW-1275. Support for host bindings will be added in a follow-up, because this PR is somewhat large as it is.
PR Close#30015
Currently when someone runs `ng update` with the static-query migration,
the migration can fail with an error saying that the `AOT` compiler could not
be created. This can happen if the CLI project contains a test `tsconfig.json`
that is picked up by the schematic.
Due to the fact that spec tsconfig files cannot be ran with NGC (e.g. test
components are not part of a module; not all source files are guaranteed to
be included), test `tsconfig` projects will now use a new `test` migration
strategy where all queries within tests are left untouched and a TODO is added.
PR Close#30034
This commit unifies the way auxillary RootScopeModule and DynamicTestModule are compiled in R3TestBed by calling `compileNgModuleDefs` explicitly for RootScopeModule. This change also resolves the problem where TestBed's code was used from the @angular/core NPM package: due to the "jit" flag, the @NgModule decorator on the RootScopeModule was transformed to RootScopeModule.decorators = [...], but actual ngModuleDef was never defined.
PR Close#30037
Fixes Ivy throwing an error because it tries to generate styling instructions for empty `style` and `class` bindings.
This PR resolves FW-1274.
PR Close#30024
Currently the `template-var-assignment` migration incorrectly warns if
the template writes to a property in the component that has the same
`ast.PropertyWrite´ name as a template input variable but different
receiver. e.g.
```html
<!-- "someProp.element" will be incorrectly reported as template variable assignment -->
<button *ngFor="let element of list" (click)="someProp.element = null">Reset</button>
```
Similarly if an output writes to a component property with the same name as a
template input variable, but the expression is within a different template scope,
the schematic currently incorrectly warns. e.g.
```html
<button *ngFor="let element of list">{{element}}</button>
<!-- The "element = null" expression does not refer to the "element" template input variable -->
<button (click)="element = null"></button>
```
PR Close#30026
Paul Gschwendtner
Ben Lesh
Matias Niemelä
Kristiyan Kostadinov
Pawel Kozlowski
cexbrayat
Kara Erickson
George Kalpakas
Marc Laval
Martin Mädler
Alex Rickabaugh
Andrew Kushnir