Currently in Ivy `NgModule` registration happens when the class is declared, however this is inconsistent with ViewEngine and requires extra generated code. These changes remove the generated code for `registerModuleFactory`, pass the id through to the `ngModuleDef` and do the module registration inside `NgModuleFactory.create`.
This PR resolves FW-1285.
PR Close#30244
```
//packages/compiler-cli/test:ngc
//packages/compiler/test:test
```
This also address `node_modules` to the ignored paths for ngc compiler as otherwise the `ready` is never fired
Partially addresses #29785
PR Close#30146
- Moves tests related to the pureFunction instructions from render3 to acceptance tests
- Leaves behind one test for in-template javascript that is not supported syntax yet
PR Close#30406
Moves over the tests from `pipe_spec` into `acceptance`. Note that the two `WrappedValue` tests haven't been moved over, because impure pipes always throw "changed after checked" errors in `TestBed`. This seems to be consistent with ViewEngine.
PR Close#30389
Now that the dependent files and compilation scopes are being tracked in
the incremental state, we can skip analysing and emitting source files if
none of their dependent files have changed since the last compile.
The computation of what files (and their dependencies) are unchanged is
computed during reconciliation.
This commit also removes the previous emission skipping logic, since this
approach covers those cases already.
PR Close#30238
To support skipping analysis of a file containing a component
we need to know that none of the declarations that might affect
its ngtsc compilation have not changed. The files that we need to
check are those that contain classes from the `CompilationScope`
of the component. These classes are already tracked in the
`LocalModuleScopeRegistry`.
This commit modifies the `IvyCompilation` class to record the
files that are in each declared class's `CompilationScope` via
a new method, `recordNgModuleScopeDependencies()`, that is called
after all the handlers have been "resolved".
Further, if analysis is skipped for a declared class, then we need
to recover the analysis from the previous compilation run. To
support this, the `IncrementalState` class has been updated to
expose the `MetadataReader` and `MetadataRegistry` interfaces.
This is included in the `metaRegistry` object to capture these analyses,
and also in the `localMetaReader` as a fallback to use if the
current compilation analysis was skipped.
PR Close#30238
As part of incremental compilation performance improvements, we need
to track the dependencies of files due to expressions being evaluated by
the `PartialEvaluator`.
The `PartialEvaluator` now accepts a `DependencyTracker` object, which is
used to track which files are visited when evaluating an expression.
The interpreter computes this `originatingFile` and stores it in the evaluation
`Context` so it can pass this to the `DependencyTracker.
The `IncrementalState` object implements this interface, which allows it to be
passed to the `PartialEvaluator` and so capture the file dependencies.
PR Close#30238
Moves most of the tests in `output_spec` into `acceptance`. Note that one test is left in `render3`, because it's testing mixing in custom logic with instructions which we can't replicate using `TestBed`.
PR Close#30372
Moves all manual `render3` content projection tests that use
the `ɵɵelementProperty` to acceptance tests. Additionally a
few other content projection tests were moved over to
acceptance. Eventually we'll be able to move all remaining
content projection tests to acceptance.
PR Close#30357
This commit moves the delegated constructor detection to a helper
function and also adds more test coverage.
The original code for this came from https://github.com/angular/angular/pull/24156
thanks to @ts2do.
Closes#24156Closes#27267
// FW-1310
PR Close#30368
After this PR is merged, maintainers no longer need to update .bazelrc
file, toolchain and platform related flags for RBE builds and tests
(unless there is a breaking change in Bazel related to those flags).
Maintainers just need to update the pin of @bazel-toolchains repo
regularly in the packages/bazel/package.bzl file according to
https://releases.bazel.build/bazel-toolchains.html to include the
latest checked-in toolchain configs. If rbe_autoconfig() cannot find
appropriate toolchain configs for the version of Bazel in the version of
@bazel_toolchains repo that is currently used by this project, it will pull
down the container and generate the configs on the fly as the beginning
of the build/test.
PR Close#29336
Currently we always just set the timing to `false` if we aren't
able to analyze a given call expression or new expression. e.g.
```ts
ngOnInit() {
thirdPartyCallSync(() => this.query.doSomething())
}
```
In that case the `thirdPartyCallSync` function comes from the `node_modules`
and is only defined through types while there is no code for the
actual function logic that can be analyzed. This makes it impossible
to tell whether the given call expression actually causes the specified
arrow function to be executed synchronously or not. In order to be able
to make this better, we now peek into the passed arrow function and
check for a synchronous query usage. If so, we set the query timing to
static and mark it as ambiguous. This ensures that the usage strategy is
less "magical" and more correct with third-party code.
Additionally since functions like `setTimeout` are not analyzable but known
to be asynchronous, there is a hard-coded list of known functions which
shouldn't be marked as ambiguous.
Resolves FW-1214. As planned within https://hackmd.io/hPiLWpPlQ4uynC1luIBdfQ
PR Close#30215
Even though we don't run the size-tracking test on CI
right now, we update the golden size map as part of
the size-tracking tool update. The size-map difference
should generally be kept up-to-date to be able to
determine which PRs contribute size to a given file.
PR Close#30257
Based on discussion that happened on the PR that introduced
the size-tracking tool, we want to have another threshold for
the raw byte difference. This allows us to better control for
which changes the size-tracking tool should report a difference.
See: https://github.com/angular/angular/pull/30070#discussion_r278332315
PR Close#30257
- splits existing property acceptance tests into property_binding and property_interpolation
- ports tests from render3 instructions tests to acceptance tests
- removes redundant or unnecessary tests that are covered by existing acceptance tests
:)
PR Close#30321
Currently the static-query migration ignores queries declared on getters
or setters as these are not part of a `PropertyDeclaration`. We need to
handle these queries in order to cover all queries within a given project.
The usage strategy is not able to detect timing for queries on accessors,
so we add a TODO and print a message. The template strategy is able
to detect the proper timing for such queries because it's not dependent
on detecting the usage of the query.
Resolves FW-1215
PR Close#30327
We have an issue where we would like to be able to test perf counter metrics in acceptance tests, but we are unable to do so, because it will break when those same tests are run with ViewEngine. This PR adds a testing utility to `onlyInIvy` that allows for testing of performance counters, and even gives readable errors for what value on `ngDevMode` is incorrect. Has typings for decent autocompletion as well.
PR Close#30339
This is the final patch to migrate the Angular styling code to have a
smaller instruction set in preparation for the runtime refactor. All
styling-related instructions now work both in template and hostBindings
functions and do not use `element` as a prefix for their names:
BEFORE:
elementStyling()
elementStyleProp()
elementClassProp()
elementStyleMap()
elementClassMap()
elementStylingApply()
AFTER:
styling()
styleProp()
classProp()
styleMap()
classMap()
stylingApply()
PR Close#30318
This patch removes all host-specific styling instructions in favor of
using element-level instructions instead. Because of the previous
patches that made sure `select(n)` worked between styling calls, all
host level instructions are not needed anymore. This patch changes each
of those instruction calls to use any of the `elementStyling*`,
`elementStyle*` and `elementClass*` styling instructions instead.
PR Close#30336
The static-query template strategy leverages the AOT compiler
in order to determine the query timing. Unfortunately the AOT
compiler has open bugs that can cause unexpected failures which
make the template strategy unusable in rare cases. These rare
exceptions need to be handled gracefully in order to avoid confusion
and to provide a more smooth migration.
Additionally migration strategy setup failures are now reported with
stack traces as the `ng update` command does not print stack traces.
This makes it easier to reproduce and report migration issues.
PR Close#30269
In an Angular CLI project scenario where projects only reference
top-level source-files through the `tsconfig` `files` option, we currently
do not migrate referenced source-files. This can be fixed checking all
referenced source-files which aren't coming from an external library.
This is similar to how `tslint` determines project source-files.
PR Close#30269
Currently when someone has a call expression within the `ngOnInit` call
and we try to peek into that function with respect to the current function
context, the schematic errors because a call expression argument is
undefined. This is valid because the target function declaration defines
that parameter with a default value. In order to fix this, we need to
respect parameter default values.
PR Close#30269
Fixes not being able to bind a `SafeStyle` as a camel cased style property (e.g. `[style.backgroundImage]="someSafeStyle"`). The issue was due to the fact that we only check the dash case property names to determine whether to sanitize a value.
This PR resolves FW-1279.
PR Close#30328
572b54967c changed how the schematic
tests are executed. Tests no longer use the schematic collection
that is also used by the CLI `ng update` command and therefore
the migration collection could technically be invalid.
In order to ensure that the public migration collection is guaranteed
to work and to avoid duplication within two schematic collections, the
changes are partially reverted and only the disabled `injectable-pipe`
schematic has its own collection.
PR Close#30198
Currently we always prompt when the static-query migration runs. This is not
always needed because some applications do not even use `ViewChild` or
`ContentChild` queries and it just causes confusion if developers need to
decide on a migration strategy while there is nothing to migrate.
In order to avoid this confusion, we no longer prompt for a strategy
if there are no queries declared within the project.
PR Close#30254
This patch is one commit of many patches that will unify all styling instructions
across both template-level bindings and host-level bindings. This patch in particular
removes the `elementIndex` param because it is already set prior to each styling
instruction via the `select(n)` instruction.
PR Close#30313
Instead of launching a Node.js process that in turn spawns Bazel binary,
the Builder could now directly spawn the native binary. This makes the
bootup process slightly more efficient, and allows the Builder to
control spawn options. This works with both Bazel and iBazel.
PR Close#30306
Currently, in jit mode, `ngInjectableDef`, `ngDirectiveDef`, `ngPipeDef` and `ngModuleDef` use `ng://`,
which display them in the top domain in Chrome Dev Tools, whereas `ngComponentDef` uses `ng:///` which display components in a separate domain.
You can currently see:
```
AppModule
UserService
ng://
|_ AppComponent
|_ template.html
|_ AppComponent.js
...
```
This commits replaces all `ng://` with `ng:///` to display every Angular entity in the `ng://` domain.
```
ng://
|_ AppModule
|_ UserService
|_ AppComponent
...
```
PR Close#29826
Prior to this patch, the `select(n)` instruction would only be generated
when property bindings are encountered which meant that styling-related
bindings were skipped. This patch ensures that all styling-related bindings
(i.e. class and style bindings) are always prepended with a `select()`
instruction prior to being generated in AOT.
PR Close#30311
This patch breaks up the existing `elementStylingMap` into
`elementClassMap` and `elementStyleMap` instructions. It also breaks
apart `hostStlyingMap` into `hostClassMap` and `hostStyleMap`
instructions. This change allows for better tree-shaking and reduces
the complexity of the styling algorithm code for `[style]` and `[class]`
bindings.
PR Close#30293
If an entry-point has a missing dependency then all the entry-points
that would have pointed to that dependency are also removed from
the dependency graph.
Previously we were still processing the dependencies of an entry-point
even if it had already been removed from the graph because it depended
upon a missing dependency that had previously been removed due to another
entry-point depending upon it.
This caused the dependency processing to crash rather than gracefully
logging and handling the missing invalid entry-point.
Fixes#29624
PR Close#30270
Kristiyan Kostadinov
Alan Agius
Ben Lesh
Olivier Combe
JiaLiPassion
Pete Bacon Darwin
Paul Gschwendtner
Xin Gao
Piotr Tomiak
Ly-lns
Matias Niemelä
Frederik Prijck
Pawel Kozlowski
Jason Aden
Keen Yee Liau
cexbrayat
likui