It's unnecessary for a jasmine_node_test rule to depend on a TypeScript library. This dependency is already satisfied via the 'data' and also having it in 'deps' causes CI flakiness on Windows
PR Close#30482
In View Engine, we would simply ignore host style bindings on template nodes. In Ivy,
we are throwing a "Cannot read length of undefined" error instead. For backwards
compatibility, we should also ignore these bindings rather than blowing up.
PR Close#30498
In View engine it is possible to instantiate a service that that has no
`@Injectable` decorator as long as it satisfies one of:
1) It has no dependencies and so a constructor with no parameters.
This is already supported in Ivy.
2) It has no constructor of its own and sub-classes a service which has
dependencies but has its own `@Injectable` decorator. This second
scenario was broken in Ivy.
In Ivy, previous to this commit, if a class to be instantiated did not have
its own `@Injectable` decorator and did not provide a constructor of
its own, then it would be created using `new` with no arguments -
i.e. falling back to the first scenario.
After this commit Ivy correctly uses the `ngInjectableDef` inherited
from the super-class to provide the `factory` for instantiating the
sub-class.
FW-1314
PR Close#30388
- Moves template ref tests from render3 unit tests to acceptance tests.
- Marks tests testing ivy specific changes as `onlyInIvy`.
- Deletes old render3 unit tests that are no longer necessary
PR Close#30443
PR #30393 corrected behavior where Object.keys sometimes returns an `undefined` value. However, the types didn't reflect this in the code. That fix actually missed one value that could return `undefined`. This PR corrects this by casting the types to what they can be in IE 11. This ensures the code behaves as it should when this edge case comes up.
PR Close#30464
In some cases where multiple navigations happen to the same URL, the router will not process a given URL. In those cases, we fall into logic that resets state for the next navigation. One piece of this resetting is to set the `browserUrlTree` to the most recent `urlAfterRedirects`i.
However, there was bug in this logic because in some cases the `urlAfterRedirects` is a stale value. This happens any time a URL won't be processed, and the previous URL will also not be processed. This creates unpredictable behavior, not the least of which ends up being a broken `back` button.
This PR kicks off new navigations with the current value the router assumes is in the browser. All the logic around how to handle future navigations is based on this value compared to the current transition, so it's important to kick off all new navigations with the current value so in the edge case described above we don't end up with an old value being set into `browserUrlTree`.
Fixes#30340
Related to #30160
PR Close#30344
Slightly improves the messages for the static-query migration in order
to make the terminal output less verbose but more helpful. Unfortunately
we are limited in what we can print due to the devkit not providing much
utilities for printing good messages from a migration schematic.
PR Close#30458
Currently if something fails in the selected strategy (e.g. AOT failures),
the migration currently accidentally falls back to the test strategy. This
is not helpful as we want to give developers the possibility to re-run
the migration after fixing potential AOT failures.
PR Close#30458
Apparently the devkit logger is not able to properly print
out error objects, so we need to convert them to a string
before in order to make the error visible to the user.
This is not testable without an e2e test that validates the CLI
terminal output.
PR Close#30458
Preserve compatibility with rollup_bundle rule.
Add missing npm dependencies, which are now enforced by the strict_deps plugin in tsc_wrapped
PR Close#30370
Moves most of the r3 change detection tests into `acceptance`. Notes:
* A handful of tests weren't migrated, because they were testing an API that isn't exposed publicly yet.
* The `should throw if bindings in children of current view have changed` and `should NOT throw if bindings in ancestors of current view have changed` tests were removed, because there's not nice way of hitting the same code path with `TestBed` and doing the same assertion as with the raw instructions. I'm open to ideas on how we could do them.
* There were a few tests that assert that the `innerHTML` looks in a particular way. I've switched them to use `textContent`, because Ivy and ViewEngine produce slightly different DOM. The tests were only checking whether the text has changed anyway.
PR Close#30425
Moves all manual render3 property binding tests to
TestBed acceptance tests. Unfortunately three property
binding tests could not be migrated as these rely on
manual Ivy template code that is not supported within
TestBed. These can be revisited as discussed in the
framework team meeting.
PR Close#30426
Moves all manual render3 tests which are located within the
`renderer_factory_spec.ts` file to acceptance tests. A few tests
that use Ivy-specific logic which is not replicable with `TestBed`
remain in the render3 folder (e.g. using `renderTemplate`)
Additionally migrated tests that assert the lifecycles of the
renderer_factory are set to *ivy only* as the lifecycle seems
to be different in Ivy. Tracked with: FW-1320
PR Close#30435
This PR fixes an issue where IE 11 can return `undefined` in with an `Object.keys` call. Solution is to add a runtime check on the value. Based on the types being passed, this shouldn't be necessary, but is needed only for IE 11. Unit test doesn't work for this PR because it can't be replicated easily.
PR Close#30393
At the moment the module resolver will end up in an infinite loop in Windows because we are assuming that the root directory is always `/` however in windows this can be any drive letter example `c:/` or `d:/` etc...
With this change we also resolve the drive letter in windows, when using `AbsoluteFsPath.from` for consistence so under `/foo` will be converted to `c:/foo` this is also needed because of relative paths with different drive letters.
PR Close#30297
Currently in Ivy `NgModule` registration happens when the class is declared, however this is inconsistent with ViewEngine and requires extra generated code. These changes remove the generated code for `registerModuleFactory`, pass the id through to the `ngModuleDef` and do the module registration inside `NgModuleFactory.create`.
This PR resolves FW-1285.
PR Close#30244
```
//packages/compiler-cli/test:ngc
//packages/compiler/test:test
```
This also address `node_modules` to the ignored paths for ngc compiler as otherwise the `ready` is never fired
Partially addresses #29785
PR Close#30146
- Moves tests related to the pureFunction instructions from render3 to acceptance tests
- Leaves behind one test for in-template javascript that is not supported syntax yet
PR Close#30406
Moves over the tests from `pipe_spec` into `acceptance`. Note that the two `WrappedValue` tests haven't been moved over, because impure pipes always throw "changed after checked" errors in `TestBed`. This seems to be consistent with ViewEngine.
PR Close#30389
Now that the dependent files and compilation scopes are being tracked in
the incremental state, we can skip analysing and emitting source files if
none of their dependent files have changed since the last compile.
The computation of what files (and their dependencies) are unchanged is
computed during reconciliation.
This commit also removes the previous emission skipping logic, since this
approach covers those cases already.
PR Close#30238
To support skipping analysis of a file containing a component
we need to know that none of the declarations that might affect
its ngtsc compilation have not changed. The files that we need to
check are those that contain classes from the `CompilationScope`
of the component. These classes are already tracked in the
`LocalModuleScopeRegistry`.
This commit modifies the `IvyCompilation` class to record the
files that are in each declared class's `CompilationScope` via
a new method, `recordNgModuleScopeDependencies()`, that is called
after all the handlers have been "resolved".
Further, if analysis is skipped for a declared class, then we need
to recover the analysis from the previous compilation run. To
support this, the `IncrementalState` class has been updated to
expose the `MetadataReader` and `MetadataRegistry` interfaces.
This is included in the `metaRegistry` object to capture these analyses,
and also in the `localMetaReader` as a fallback to use if the
current compilation analysis was skipped.
PR Close#30238
As part of incremental compilation performance improvements, we need
to track the dependencies of files due to expressions being evaluated by
the `PartialEvaluator`.
The `PartialEvaluator` now accepts a `DependencyTracker` object, which is
used to track which files are visited when evaluating an expression.
The interpreter computes this `originatingFile` and stores it in the evaluation
`Context` so it can pass this to the `DependencyTracker.
The `IncrementalState` object implements this interface, which allows it to be
passed to the `PartialEvaluator` and so capture the file dependencies.
PR Close#30238
Moves most of the tests in `output_spec` into `acceptance`. Note that one test is left in `render3`, because it's testing mixing in custom logic with instructions which we can't replicate using `TestBed`.
PR Close#30372
Moves all manual `render3` content projection tests that use
the `ɵɵelementProperty` to acceptance tests. Additionally a
few other content projection tests were moved over to
acceptance. Eventually we'll be able to move all remaining
content projection tests to acceptance.
PR Close#30357
This commit moves the delegated constructor detection to a helper
function and also adds more test coverage.
The original code for this came from https://github.com/angular/angular/pull/24156
thanks to @ts2do.
Closes#24156Closes#27267
// FW-1310
PR Close#30368
After this PR is merged, maintainers no longer need to update .bazelrc
file, toolchain and platform related flags for RBE builds and tests
(unless there is a breaking change in Bazel related to those flags).
Maintainers just need to update the pin of @bazel-toolchains repo
regularly in the packages/bazel/package.bzl file according to
https://releases.bazel.build/bazel-toolchains.html to include the
latest checked-in toolchain configs. If rbe_autoconfig() cannot find
appropriate toolchain configs for the version of Bazel in the version of
@bazel_toolchains repo that is currently used by this project, it will pull
down the container and generate the configs on the fly as the beginning
of the build/test.
PR Close#29336
Currently we always just set the timing to `false` if we aren't
able to analyze a given call expression or new expression. e.g.
```ts
ngOnInit() {
thirdPartyCallSync(() => this.query.doSomething())
}
```
In that case the `thirdPartyCallSync` function comes from the `node_modules`
and is only defined through types while there is no code for the
actual function logic that can be analyzed. This makes it impossible
to tell whether the given call expression actually causes the specified
arrow function to be executed synchronously or not. In order to be able
to make this better, we now peek into the passed arrow function and
check for a synchronous query usage. If so, we set the query timing to
static and mark it as ambiguous. This ensures that the usage strategy is
less "magical" and more correct with third-party code.
Additionally since functions like `setTimeout` are not analyzable but known
to be asynchronous, there is a hard-coded list of known functions which
shouldn't be marked as ambiguous.
Resolves FW-1214. As planned within https://hackmd.io/hPiLWpPlQ4uynC1luIBdfQ
PR Close#30215
Even though we don't run the size-tracking test on CI
right now, we update the golden size map as part of
the size-tracking tool update. The size-map difference
should generally be kept up-to-date to be able to
determine which PRs contribute size to a given file.
PR Close#30257
Based on discussion that happened on the PR that introduced
the size-tracking tool, we want to have another threshold for
the raw byte difference. This allows us to better control for
which changes the size-tracking tool should report a difference.
See: https://github.com/angular/angular/pull/30070#discussion_r278332315
PR Close#30257
Alan Agius
Kara Erickson
Olivier Combe
Paul Gschwendtner
Pete Bacon Darwin
Ben Lesh
Jason Aden
Alex Rickabaugh
cexbrayat
Keen Yee Liau
Alex Eagle
Kristiyan Kostadinov
JiaLiPassion
Xin Gao