This commit replaces the `IncrementalDriver` abstraction which powered
incremental compilation in the compiler with a new `IncrementalCompilation`
design. Principally, it separates two concerns which were tied together in
the previous implementation:
1. Tracking the reusable state of a compilation at any given point that
could be reused in a subsequent future compilation.
2. Making use of a prior compilation's state to accelerate the current one.
The new abstraction adds explicit tracking and types to deal with both of
these concerns separately, which greatly reduces the complexity of the state
tracking that `IncrementalDriver` used to perform.
PR Close#41475
Previously, the `DefaultImportRecorder` interface was used as follows:
1. During the analysis phase, the default import declaration of an
identifier was recorded.
2. During the emit phase each emitted identifier would be recorded.
The information from step 1 would then be used to determine the
default import declaration of the identifier which would be
registered as used.
3. A TypeScript transform would taint all default imports that were
registered as used in step 2 such that the imports are not elided
by TypeScript.
In incremental compilations, a file may have to be emitted even if its
analysis data has been reused from the prior compilation. This would
mean that step 1 is not executed, resulting in a mismatch in step 2 and
ultimately in incorrectly eliding the default. This was mitigated by
storing the mapping from identifier to import declaration on the
`ts.SourceFile` instead of a member of `DefaultImportTracker` such that
it would also be visible to the `DefaultImportRecorder` of subsequent
compiles even if step 1 had not been executed.
Ultimately however, the information that is being recorded into the
`DefaultImportRecorder` has a longer lifetime than a single
`DefaultImportRecorder` instance, as that is only valid during a single
compilation whereas the identifier to import declaration mapping
outlives a single compilation. This commit replaces the registration of
this mapping by attaching the default import declaration on the output
AST node that captures the identifier. This enables the removal of
all of the `DefaultImportRecorder` usages throughout the analysis phase
together with the `DefaultImportRecorder` interface itself.
PR Close#41557
The other similar interfaces were renamed in https://github.com/angular/angular/pull/41119,
but this one was left since it had existed before Ivy. It looks like the interface was
never actually exposed on npm so it is safe to rename this one too.
PR Close#41316
This change introduces a new hook on the `ResourceHost` interface named `transformResource`.
Resource transformation allows both external and inline resources to be transformed prior to
compilation by the AOT compiler. This provides support for tooling integrations to enable
features such as preprocessor support for inline styles.
Only style resources are currently supported. However, the infrastructure is in place to add
template support in the future.
PR Close#41307
Now that other values were removed from `R3ResolvedDependencyType`,
its meaning can now be inferred from the other properties in the
`R3DeclareDependencyMetadata` type. This commit removes this enum
and updates the code to work without it.
PR Close#41231
This instruction was created to work around a problem with injecting a
`ChangeDetectorRef` into a pipe. See #31438. This fix required special
metadata for when the thing being injected was a `ChangeDetectorRef`.
Now this is handled by adding a flag `InjectorFlags.ForPipe` to the
`ɵɵdirectiveInject()` call, which avoids the need to special test_cases
`ChangeDetectorRef` in the generated code.
PR Close#41231
ngtsc has an internal performance tracing package, which previously has not
really seen much use. It used to track performance statistics on a very
granular basis (microseconds per actual class analysis, for example). This
had two problems:
* it produced voluminous amounts of data, complicating the analysis of such
results and providing dubious value.
* it added nontrivial overhead to compilation when used (which also affected
the very performance of the operations being measured).
This commit replaces the old system with a streamlined performance tracing
setup which is lightweight and designed to be always-on. The new system
tracks 3 metrics:
* time taken by various phases and operations within the compiler
* events (counters) which measure the shape and size of the compilation
* memory usage measured at various points of the compilation process
If the compiler option `tracePerformance` is set, the compiler will
serialize these metrics to a JSON file at that location after compilation is
complete.
PR Close#41125
TypeScript 4.2 has changed its emitted syntax for synthetic constructors
when using `downlevelIteration`, which affects ES5 bundles that have
been downleveled from ES2015 bundles. This is typically the case for UMD
bundles in the APF spec, as they are generated by downleveling the
ESM2015 bundle into ES5. ngcc needs to detect the new syntax in order to
correctly identify synthesized constructor functions in ES5 bundles.
Fixes#41298
PR Close#41305
Th `ɵɵFactoryDef` type will appear in published libraries, via their typings
files, to describe what type dependencies a DI factory has. The parameters
on this type are used by tooling such as the Language Service to understand
the DI dependencies of the class being created by the factory.
This commit moves the type to the `public_definitions.ts` file alongside
the other types that have a similar role, and it renames it to `ɵɵFactoryDeclaration`
to align it with the other declaration types such as `ɵɵDirectiveDeclaration`
and so on.
PR Close#41119
These types are only used in the generated typings files to provide
information to the Angular compiler in order that it can compile code
in downstream libraries and applications.
This commit aliases these types to `unknown` to avoid exposing the
previous alias types such as `ɵɵDirectiveDef`, which are internal to
the compiler.
PR Close#41119
This commit complements the support for the `__spreadArray` helper that
was added in microsoft/TypeScript#41523. The prior helpers `__spread`
and `__spreadArrays` used the `__read` helper internally, but the helper
is now emitted as an argument to `__spreadArray` so ngcc now needs to
support evaluating it statically. The real implementation of `__read`
reads an iterable into an array, but for ngcc's static evaluation
support it is sufficient to only deal with arrays as is. Additionally,
the optional `n` parameter is not supported as that is only emitted for
array destructuring syntax, which ngcc does not have to support.
PR Close#41201
In TypeScript 4.2 the `__spread` and `__spreadArrays` helpers were both
replaced by the new helper function `__spreadArray` in
microsoft/TypeScript#41523. These helpers may be used in downleveled
JavaScript bundles that ngcc has to process, so ngcc has the ability to
statically detect these helpers and provide evaluation logic for them.
Because Angular is adopting support for TypeScript 4.2 it becomes
possible for libraries to be compiled by TypeScript 4.2 and thus ngcc
has to add support for the `__spreadArray` helper. The deprecated
`__spread` and `__spreadArrays` helpers are not affected by this change.
Closes#40394
PR Close#41201
The recently introduced typings-only mode in ngcc would incorrectly
write compiled JavaScript files if typings-only mode was requested, in
case the typings of the entry-point had already been processed in a
prior run of ngcc. The corresponding format property for which the
JavaScript files were written were not marked as processed, though, as
the typings-only mode excluded the format property itself from being
marked as processed. Consequently, subsequent runs of ngcc would not
consider the entry-point to have been processed and recompile the
JavaScript bundle once more, resulting in duplicate ngcc imports.
Fixes#41198
PR Close#41209
BREAKING CHANGE:
Switching default of `emitDistinctChangesOnlyDefaultValue`
which changes the default behavior and may cause some applications which
rely on the incorrect behavior to fail.
`emitDistinctChangesOnly` flag has also been deprecated and will be
removed in a future major release.
The previous implementation would fire changes `QueryList.changes.subscribe`
whenever the `QueryList` was recomputed. This resulted in an artificially
high number of change notifications, as it is possible that recomputing
`QueryList` results in the same list. When the `QueryList` gets recomputed
is an implementation detail, and it should not be the thing that determines
how often change event should fire.
Unfortunately, fixing the behavior outright caused too many existing
applications to fail. For this reason, Angular considers this fix a
breaking fix and has introduced a flag in `@ContentChildren` and
`@ViewChildren`, that controls the behavior.
```
export class QueryCompWithStrictChangeEmitParent {
@ContentChildren('foo', {
// This option is the new default with this change.
emitDistinctChangesOnly: true,
})
foos!: QueryList<any>;
}
```
For backward compatibility before v12
`emitDistinctChangesOnlyDefaultValue` was set to `false. This change
changes the default to `true`.
PR Close#41121
The import graph scans source files for its import and export statements
to extract the source files that it imports/exports. Such statements
contain a module specifier string and this module specifier used to be
resolved to the actual source file using an explicit module resolution
step. This is especially expensive in incremental rebuilds, as the
module resolution cache has not been primed during program creation
(assuming that the incremental program was able to reuse the module
resolution results from a prior compilation). This meant that all module
resolution requests would have to hit the filesystem, which is
relatively slow.
This commit is able to replace the module resolution with TypeScript's
bound symbol of the module specifier. This symbol corresponds with the
`ts.SourceFile` that is being imported/exported, which is exactly what
the import graph was interested in. As a result, no filesystem accesses
are done anymore.
PR Close#40948
This change marks all relevant define* callsites as pure, causing the compiler to
emmit either @__PURE__ or @pureOrBreakMyCode annotation based on whether we are
compiling code annotated for closure or terser.
This change is needed in g3 where we don't run build optimizer but we
need the code to be annotated for the closure compiler.
Additionally this change allows for simplification of CLI and build optimizer as they
will no longer need to rewrite the generated code (there are still other places where
a build optimizer rewrite will be necessary so we can't remove it, we can only simplify it).
PR Close#41096
In Angular programs, changing a file may require other files to be
emitted as well due to implicit NgModule dependencies. For example, if
the selector of a directive is changed then all components that have
that directive in their compilation scope need to be recompiled, as the
change of selector may affect the directive matching results.
Until now, the compiler solved this problem using a single dependency
graph. The implicit NgModule dependencies were represented in this
graph, such that a changed file would correctly also cause other files
to be re-emitted. This approach is limited in a few ways:
1. The file dependency graph is used to determine whether it is safe to
reuse the analysis data of an Angular decorated class. This analysis
data is invariant to unrelated changes to the NgModule scope, but
because the single dependency graph also tracked the implicit
NgModule dependencies the compiler had to consider analysis data as
stale far more often than necessary.
2. It is typical for a change to e.g. a directive to not affect its
public API—its selector, inputs, outputs, or exportAs clause—in which
case there is no need to re-emit all declarations in scope, as their
compilation output wouldn't have changed.
This commit implements a mechanism by which the compiler is able to
determine the impact of a change by comparing it to the prior
compilation. To achieve this, a new graph is maintained that tracks all
public API information of all Angular decorated symbols. During an
incremental compilation this information is compared to the information
that was captured in the most recently succeeded compilation. This
determines the exact impact of the changes to the public API, which
is then used to determine which files need to be re-emitted.
Note that the file dependency graph remains, as it is still used to
track the dependencies of analysis data. This graph does no longer track
the implicit NgModule dependencies, which allows for better reuse of
analysis data.
These changes also fix a bug where template type-checking would fail to
incorporate changes made to a transitive base class of a
directive/component. This used to be a problem because transitive base
classes were not recorded as a transitive dependency in the file
dependency graph, such that prior type-check blocks would erroneously
be reused.
This commit also fixes an incorrectness where a change to a declaration
in NgModule `A` would not cause the declarations in NgModules that
import from NgModule `A` to be re-emitted. This was intentionally
incorrect as otherwise the performance of incremental rebuilds would
have been far worse. This is no longer a concern, as the compiler is now
able to only re-emit when actually necessary.
Fixes#34867Fixes#40635Closes#40728
PR Close#40947
Ngcc uses the `paths` property to compute the potential base-paths
for packages that are being processed. If the `paths` contain a wildcard
`*` within a path segment, ngcc was not finding the base-path correctly.
Now when a wildcard is found, there is an additional search to look for
paths that might match the wildcard.
Fixes#41014
PR Close#41033
Previously, when `ngcc` encountered an entry-point with a format-path
that pointed to a non-existing or empty file it would throw an error and
stop processing the remaining tasks.
In the past, we used to ignore such format-paths and continue processing
the rest of the tasks ([see code][1]). This was changed to a hard
failure in 2954d1b5ca. Looking at the code
history, the reason for changing the behavior was an (incorrect)
assumption that the condition could not fail. This assumption failed to
take into account the case where a 3rd-party library has an invalid
format-path in its `package.json`. This is an issue with the library,
but it should not prevent `ngcc` from processing other
packages/entry-points/formats.
This commit fixes this by reporting the task as failed but not throwing
an error, thus allowing `ngcc` to continue processing other tasks.
[1]: https://github.com/angular/angular/blob/3077c9a1f89c5bd75fb96c16e/packages/compiler-cli/ngcc/src/main.ts#L124Fixes#40965
PR Close#40985
Some tools (such as Language Server and ng-packagr) only care about
the processed typings generated by ngcc. Forcing these tools to process
the JavaScript files as well has two disadvantages:
First, unnecessary work is being done, which is time consuming.
But more importantly, it is not always possible to know how the final bundling
tools will want the processed JavaScript to be configured. For example,
the CLI would prefer the `--create-ivy-entry-points` option but this would
break non-CLI build tooling.
This commit adds a new option (`--typings-only` on the command line, and
`typingsOnly` via programmatic API) that instructs ngcc to only render changes
to the typings files for the entry-points that it finds, and not to write any
JavaScript files.
In order to process the typings, a JavaScript format will need to be analysed, but
it will not be rendered to disk. When using this option, it is best to offer ngcc a
wide range of possible JavaScript formats to choose from, and it will use the
first format that it finds. Ideally you would configure it to try the `ES2015` FESM
format first, since this will be the most performant.
Fixes#40969
PR Close#40976
Our approach for handling cyclic imports results in code that is
not easy to tree-shake, so it is not suitable for publishing in a
library.
When compiling in partial compilation mode, we are targeting
such library publication, so we now create a fatal diagnostic
error instead of trying to handle the cyclic import situation.
Closes#40678
PR Close#40782
This commit causes imports added by ngtsc's `ImportManager` to have their
TypeScript "original node" set to the generated `ts.ImportDeclaration`
statement.
In g3, the tsickle transformer runs after the Angular transformer and post-
processes Angular's compilation output. One of its post-processing tasks is
to transform generated imports and references to imported symbols from the
commonjs module system to the g3 module system. Part of this transformation
involves recognizing modules with specific metadata and altering references
to symbols from those modules accordingly.
Normally, tsickle can rely on TypeScript's binding for an imported symbol to
find its origin module and thus the correct metadata for the symbol. However
the Angular transform generates new synthetic imports which don't have such
binding information. Angular's imports are always namespace imports of the
form:
```
import * as qualifier 'module/specifier';
```
References to such an import are then of the form `qualifier.SymbolName`.
To process such imports properly, tsickle needs to be able to associate the
reference to `qualifier` in the expression `qualifer.SymbolName` with the
`ts.ImportDeclaration` statement that defines it. It expects to do this by
looking at the `ts.getOriginalNode()` for the `qualifier` reference, which
should be the `ts.ImportDeclaration`. This commit changes ngtsc's import
generation mechanism to set the original node on `qualifier` identifiers
according to this expectation.
This commit is not tested in the direct compiler tests, since:
1) there is no observable behavior externally from setting the original node
2) we don't have tests that intercept transformer operations (which could be
used to directly assert against the AST nodes)
3) tsickle's published version does not (yet) contain the g3-specific
transformations which rely on the original node and would thus allow the
behavior to be observed.
Instead, we rely on the g3 testing suite to validate the correctness of this
fix. Breaking this functionality would cause g3 compilation errors for
targets, since tsickle would be unable to transform imports correctly.
PR Close#40711
When a source-map has an inline source, any source-map linked from
that source should only be loaded if itself is also inline; it should not
attempt to load a source-map from the file-system. Otherwise we can
find ourselves with inadvertent infinite cyclic dependencies.
For example, if a transpiler takes a file (e.g. index.js) and generates
a new file overwriting the original file - capturing the original
source inline in the new source-map (index.js.map) - the source
file loader might read the inline original file (also index.js) and
then try to load the `index.js.map` file from disk - ad infinitum.
Note that the first call to `loadSourceFile()` is special, since you can
pass in the source-file and source-map contents directly as in-memory
strrngs. This is common if the transpiler has just generated these and has
not yet written them to disk.
When the contents are passed into `loadSourceFile()` directly, they are
not treated as "inline" for the purposes described above since there is
no chance of these "in-memory" source and source-map contents being caught
up in a cyclic dependency.
Fixes#40408
PR Close#40435
Because the query now has `flags` which specify the mode, the static query
instruction can now be remove. It is simply normal query with `static` flag.
PR Close#40091
When using the `NewEntryPointWriter`, we must copy over all files from the
entry-point bundle to the new entry-point. But since we are going to
write out the modified files directly, there is no need to copy those.
This commit skips copying the files that have been modified.
PR Close#40429
When using the `NewEntryPointWriter` we copy unmodified files over to the new
entry-point in addition to writing out the source files that are processed by ngcc.
But we were not copying over associated source-map files for these unmodified
source files, leading to warnings in downstream tooling.
Now we will also copy over source-maps that reside as siblings of unmodified
source files. We have to make sure that the sources of the source-map point
to the correct files, so we also update the `sourceRoot` property of the copied
source-map.
Fixes#40358
PR Close#40429
Previously, if there were path-mapped entry-points, where one contaied the
string of another - for example `worker-client` and `worker` - then the
base paths were incorrectly computed resulting in the wrong package path
for the longer entry-point. This was because, when searching for a matching
base path, the strings were tested using `startsWith()`, whereas we should
only match if the path was contained in a directory from a file-system
point of view.
Now we not only check whether the target path "starts with" the base path
but then also whether the target path is actually contained in the base path
using `fs.relative()`.
Fixes#40352Fixes#40357
PR Close#40376
Now that `ReadonlyFileSystem` and `PathManipulation` interfaces are
available, this commit updates the compiler-cli to use these more
focussed interfaces.
PR Close#40281
The link to the "speeding-up-ngcc-compilation" URL does not exist,
it was removed shortly after it was added, but the link in the ngcc
error message was not updated.
Fixes#39837
PR Close#40285
The `annotations` package in the compiler previously contained a registry
which tracks NgModule scopes for template type-checking, including unifying
all type-checking metadata across class inheritance lines.
This commit generalizes this utility and prepares it for use in the
`TemplateTypeChecker` as well, to back APIs used by the language service.
PR Close#40032
Prior to this change, the `setClassMetadata` call would be invoked
inside of an IIFE that was marked as pure. This allows the call to be
tree-shaken away in production builds, as the `setClassMetadata` call
is only present to make the original class metadata available to the
testing infrastructure. The pure marker is problematic, though, as the
`setClassMetadata` call does in fact have the side-effect of assigning
the metadata into class properties. This has worked under the assumption
that only build optimization tools perform tree-shaking, however modern
bundlers are also able to elide calls that have been marked pure so this
assumption does no longer hold. Instead, an `ngDevMode` guard is used
which still allows the call to be elided but only by tooling that is
configured to consider `ngDevMode` as constant `false` value.
PR Close#39987
Add a TaggedTemplateExpr to represent tagged template literals in
Angular's syntax tree (more specifically Expression in output_ast.ts).
Also update classes that implement ExpressionVisitor to add support for
tagged template literals in different contexts, such as JIT compilation
and conversion to JS.
Partial support for tagged template literals had already been
implemented to support the $localize tag used by Angular's i18n
framework. Where applicable, this code was refactored to support
arbitrary tags, although completely replacing the i18n-specific support
for the $localize tag with the new generic support for tagged template
literals may not be completely trivial, and is left as future work.
PR Close#39122
When the compiler is invoked via ngc or the Angular CLI, its APIs are used
under the assumption that Angular analysis/diagnostics are only requested if
the program has no TypeScript-level errors. A result of this assumption is
that the incremental engine has not needed to resolve changes via its
dependency graph when the program contained broken imports, since broken
imports are a TypeScript error.
The Angular Language Service for Ivy is using the compiler as a backend, and
exercising its incremental compilation APIs without enforcing this
assumption. As a result, the Language Service has run into issues where
broken imports cause incremental compilation to fail and produce incorrect
results.
This commit introduces a mechanism within the compiler to keep track of
files for which dependency analysis has failed, and to always treat such
files as potentially affected by future incremental steps. This is tested
via the Language Service infrastructure to ensure that the compiler is doing
the right thing in the case of invalid imports.
PR Close#39923
To avoid overwhelming a user with secondary diagnostics that derive from a
"root cause" error, the compiler has the notion of a "poisoned" NgModule.
An NgModule becomes poisoned when its declaration contains semantic errors:
declarations which are not components or pipes, imports which are not other
NgModules, etc. An NgModule also becomes poisoned if it imports or exports
another poisoned NgModule.
Previously, the compiler tracked this poisoned status as an alternate state
for each scope. Either a correct scope could be produced, or the entire
scope would be set to a sentinel error value. This meant that the compiler
would not track any information about a scope that was determined to be in
error.
This method presents several issues:
1. The compiler is unable to support the language service and return results
when a component or its module scope is poisoned.
This is fine for compilation, since diagnostics will be produced showing the
error(s), but the language service needs to still work for incorrect code.
2. `getComponentScopes()` does not return components with a poisoned scope,
which interferes with resource tracking of incremental builds.
If the component isn't included in that list, then the NgModule for it will
not have its dependencies properly tracked, and this can cause future
incremental build steps to produce incorrect results.
This commit changes the tracking of poisoned module scopes to use a flag on
the scope itself, rather than a sentinel value that replaces the scope. This
means that the scope itself will still be tracked, even if it contains
semantic errors. A test is added to the language service which verifies that
poisoned scopes can still be used in template type-checking.
PR Close#39923
Previously, if a trait's analysis step resulted in diagnostics, the trait
would be considered "errored" and no further operations, including register,
would be performed. Effectively, this meant that the compiler would pretend
the class in question was actually undecorated.
However, this behavior is problematic for several reasons:
1. It leads to inaccurate diagnostics being reported downstream.
For example, if a component is put into the error state, for example due to
a template error, the NgModule which declares the component would produce a
diagnostic claiming that the declaration is neither a directive nor a pipe.
This happened because the compiler wouldn't register() the component trait,
so the component would not be recorded as actually being a directive.
2. It can cause incorrect behavior on incremental builds.
This bug is more complex, but the general issue is that if the compiler
fails to associate a component and its module, then incremental builds will
not correctly re-analyze the module when the component's template changes.
Failing to register the component as such is one link in the larger chain of
issues that result in these kinds of issues.
3. It lumps together diagnostics produced during analysis and resolve steps.
This is not causing issues currently as the dependency graph ensures the
right classes are re-analyzed when needed, instead of showing stale
diagnostics. However, the dependency graph was not intended to serve this
role, and could potentially be optimized in ways that would break this
functionality.
This commit removes the concept of an "errored" trait entirely from the
trait system. Instead, analyzed and resolved traits have corresponding (and
separate) diagnostics, in addition to potentially `null` analysis results.
Analysis (but not resolution) diagnostics are carried forward during
incremental build operations. Compilation (emit) is only performed when
a trait reaches the resolved state with no diagnostics.
This change is functionally different than before as the `register` step is
now performed even in the presence of analysis errors, as long as analysis
results are also produced. This fixes problem 1 above, and is part of the
larger solution to problem 2.
PR Close#39923
ngtsc has a robust suite of testing utilities, designed for in-memory
testing of a TypeScript compiler. Previously these utilities lived in the
`test` directory for the compiler-cli package.
This commit moves those utilities to an `ngtsc/testing` package, enabling
them to be depended on separately and opening the door for using them from
the upcoming language server testing infrastructure.
As part of this refactoring, the `fake_core` package (a lightweight API
replacement for @angular/core) is expanded to include functionality needed
for Language Service test use cases.
PR Close#39594
In addition to the template mapping that already existed, we want to also track the mapping for external
style files. We also store the `ts.Expression` in the registry so external tools can look up a resource
on a component by expression and avoid reading the value.
PR Close#39373
This reverts commit 561c0f81a0.
The original commit provided a quick escape from an already terminal
situation by killing the process if the PID in the lockfile was not
found in the list of processes running on the current machine.
But this broke use-cases where the node_modules was being shared between
multiple machines (or more commonly Docker containers on the same actual
machine).
Fixes#38875
PR Close#39435
Previously, UMD/CommonJS class inline declarations of the form:
```ts
exports.Foo = (function() { function Foo(); return Foo; })();
```
were capturing the whole IIFE as the implementation, rather than
the inner class (i.e. `function Foo() {}` in this case). This caused
the interpreter to break when it was trying to access such an export,
since it would try to evaluate the IIFE rather than treating it as a class
declaration.
PR Close#39346
Previously, inline exports of the form `exports.foo = <implementation>;` were
being interpreted (by the ngtsc `PartialInterpeter`) as `Reference` objects.
This is not what is desired since it prevents the value of the export
from being unpacked, such as when analyzing `NgModule` declarations:
```
exports.directives = [Directive1, Directive2];
@NgImport({declarations: [exports.directives]})
class AppModule {}
```
In this example the interpreter would think that `exports.directives`
was a reference rather than an array that needs to be unpacked.
This bug was picked up by the ngcc-validation repository. See
https://github.com/angular/ngcc-validation/pull/1990 and
https://circleci.com/gh/angular/ngcc-validation/17130
PR Close#39267
When ngcc is configured to run with the `--use-program-dependencies`
flag, as is the case in the CLI's asynchronous processing, it will scan
all source files in the program, starting from the program's root files
as configured in the tsconfig. Each individual root file could
potentially rescan files that had already been scanned for an earlier
root file, causing a severe performance penalty if the number of root
files is large. This would be the case if glob patterns are used in the
"include" specification of a tsconfig file.
This commit avoids the performance penalty by keeping track of the files
that have been scanned across all root files, such that no source file
is scanned multiple times.
Fixes#39240
PR Close#39254
Previously, any declarations that were defined "inline" were not
recognised by the `UmdReflectionHost`.
For example, the following syntax was completely unrecognized:
```ts
var Foo_1;
exports.Foo = Foo_1 = (function() {
function Foo() {}
return Foo;
})();
exports.Foo = Foo_1 = __decorate(SomeDecorator, Foo);
```
Such inline classes were ignored and not processed by ngcc.
This lack of processing led to failures in Ivy applications that relied
on UMD formats of libraries such as `syncfusion/ej2-angular-ui-components`.
Now all known inline UMD exports are recognized and processed accordingly.
Fixes#38947
PR Close#38959
Previously these tests were checking multiple specific expression
types. The new helper function is more general and will also support
`PropertyAccessExpression` nodes for `InlineDeclaration` types.
PR Close#38959
Previously the `ConcreteDeclaration` and `InlineDeclaration` had
different properties for the underlying node type. And the `InlineDeclaration`
did not store a value that represented its declaration.
It turns out that a natural declaration node for an inline type is the
expression. For example in UMD/CommonJS this would be the `exports.<name>`
property access node.
So this expression is now used for the `node` of `InlineDeclaration` types
and the `expression` property is dropped.
To support this the codebase has been refactored to use a new `DeclarationNode`
type which is a union of `ts.Declaration|ts.Expression` instead of `ts.Declaration`
throughout.
PR Close#38959
This makes these tests more resilient to changes in the test code
structure. For example switching from
```
var SomeClass = <implementation>;
exports.SomeClass = SomeClass;
```
to
```
exports.SomeClass = <implementation>;
```
PR Close#38959
Alex Rickabaugh
JoostK
Pete Bacon Darwin
Charles Lyding
Misko Hevery
Igor Minar
George Kalpakas
Joey Perrott
Alexey Elin
Bjarki
Andrew Scott