@title
Routing
@intro
Add the Angular component router and learn to navigate among the views.
@description
There are new requirements for the Tour of Heroes app:
* Add a *Dashboard* view.
* Add the ability to navigate between the *Heroes* and *Dashboard* views.
* When users click a hero name in either view, navigate to a detail view of the selected hero.
* When users click a *deep link* in an email, open the detail view for a particular hero.
When you’re done, users will be able to navigate the app like this:
To satisfy these requirements, you'll add Angular’s router to the app.
For more information about the router, read the [Routing and Navigation](guide/router) page.
When you're done with this page, the app should look like this .
## Where you left off
Before continuing with the Tour of Heroes, verify that you have the following structure.
angular-tour-of-heroes
src
app
app.component.ts
app.module.ts
hero.service.ts
hero.ts
hero-detail.component.ts
mock-heroes.ts
main.ts
index.html
styles.css
systemjs.config.js
tsconfig.json
node_modules ...
package.json
## Keep the app transpiling and running
Enter the following command in the terminal window:
npm start
This command runs the TypeScript compiler in "watch mode", recompiling automatically when the code changes.
The command simultaneously launches the app in a browser and refreshes the browser when the code changes.
You can keep building the Tour of Heroes without pausing to recompile or refresh the browser.
## Action plan
Here's the plan:
* Turn `AppComponent` into an application shell that only handles navigation.
* Relocate the *Heroes* concerns within the current `AppComponent` to a separate `HeroesComponent`.
* Add routing.
* Create a new `DashboardComponent`.
* Tie the *Dashboard* into the navigation structure.
*Routing* is another name for *navigation*. The router is the mechanism for navigating from view to view.
## Splitting the *AppComponent*
The current app loads `AppComponent` and immediately displays the list of heroes.
The revised app should present a shell with a choice of views (*Dashboard* and *Heroes*)
and then default to one of them.
The `AppComponent` should only handle navigation, so you'll
move the display of *Heroes* out of `AppComponent` and into its own `HeroesComponent`.
### *HeroesComponent*
`AppComponent` is already dedicated to *Heroes*.
Instead of moving the code out of `AppComponent`, rename it to `HeroesComponent`
and create a separate `AppComponent` shell.
Do the following:
* Rename the app.component.ts file to heroes.component.ts.
* Rename the `AppComponent` class as `HeroesComponent` (rename locally, _only_ in this file).
* Rename the selector `my-app` as `my-heroes`.
### Create *AppComponent*
The new `AppComponent` is the application shell.
It will have some navigation links at the top and a display area below.
Perform these steps:
* Create the file src/app/app.component.ts.
* Define an exported `AppComponent` class.
* Add an `@Component` decorator above the class with a `my-app` selector.
* Move the following from `HeroesComponent` to `AppComponent`:
* `title` class property.
* `@Component` template `
` element, which contains a binding to `title`.
* Add a `` element to the app template just below the heading so you still see the heroes.
* Add `HeroesComponent` to the `declarations` array of `AppModule` so Angular recognizes the `` tags.
* Add `HeroService` to the `providers` array of `AppModule` because you'll need it in every other view.
* Remove `HeroService` from the `HeroesComponent` `providers` array since it was promoted.
* Add the supporting `import` statements for `AppComponent`.
The first draft looks like this:
The app still runs and displays heroes.
## Add routing
Instead of displaying automatically, heroes should display after users click a button.
In other words, users should be able to navigate to the list of heroes.
Use the Angular router to enable navigation.
The Angular router is an external, optional Angular NgModule called `RouterModule`.
The router is a combination of multiple provided services (`RouterModule`),
multiple directives (`RouterOutlet, RouterLink, RouterLinkActive`),
and a configuration (`Routes`). You'll configure the routes first.
### *<base href>*
Open `index.html` and ensure there is a `` element
(or a script that dynamically sets this element)
at the top of the `` section.
base href is essential
For more information, see the [Set the base href](guide/router)
section of the [Routing and Navigation](guide/router) page.
{@a configure-routes}
### Configure routes
Create a configuration file for the app routes.
*Routes* tell the router which views to display when a user clicks a link or
pastes a URL into the browser address bar.
Define the first route as a route to the heroes component.
The `Routes` are an array of *route definitions*.
This route definition has the following parts:
* *Path*: The router matches this route's path to the URL in the browser address bar (`heroes`).
* *Component*: The component that the router should create when navigating to this route (`HeroesComponent`).
Read more about defining routes with `Routes` in the [Routing & Navigation](guide/router) page.
### Make the router available
Import the `RouterModule` and add it to the `AppModule` imports array.
The `forRoot()` method is called because a configured router is provided at the app's root.
The `forRoot()` method supplies the Router service providers and directives needed for routing, and
performs the initial navigation based on the current browser URL.
### Router outlet
If you paste the path, `/heroes`, into the browser address bar at the end of the URL,
the router should match it to the `heroes` route and display the `HeroesComponent`.
However, you have to tell the router where to display the component.
To do this, you can add a `` element at the end of the template.
`RouterOutlet` is one of the directives provided by the `RouterModule`.
The router displays each component immediately below the `` as users navigate through the app.
### Router links
Users shouldn't have to paste a route URL into the address bar.
Instead, add an anchor tag to the template that, when clicked, triggers navigation to the `HeroesComponent`.
The revised template looks like this:
Note the `routerLink` binding in the anchor tag.
The `RouterLink` directive (another of the `RouterModule` directives) is bound to a string
that tells the router where to navigate when the user clicks the link.
Since the link is not dynamic, a routing instruction is defined with a one-time binding to the route path.
Looking back at the route configuration, you can confirm that `'/heroes'` is the path of the route to the `HeroesComponent`.
Read more about dynamic router links and the link parameters array
in the [Appendix: Link Parameters Array](guide/router#link-parameters-array) section of the
[Routing & Navigation](guide/router) page.
Refresh the browser. The browser displays the app title and heroes link, but not the heroes list.
The browser's address bar shows `/`.
The route path to `HeroesComponent` is `/heroes`, not `/`.
Soon you'll add a route that matches the path `/`.
Click the *Heroes* navigation link. The address bar updates to `/heroes`
and the list of heroes displays.
`AppComponent` now looks like this:
The *AppComponent* is now attached to a router and displays routed views.
For this reason, and to distinguish it from other kinds of components,
this component type is called a *router component*.
## Add a dashboard
Routing only makes sense when multiple views exist.
To add another view, create a placeholder `DashboardComponent`, which users can navigate to and from.
You'll make this component more useful later.
### Configure the dashboard route
To teach `app.module.ts` to navigate to the dashboard,
import the dashboard component and
add the following route definition to the `Routes` array of definitions.
Also import and add `DashboardComponent` to the `AppModule`'s `declarations`.
### Add a redirect route
Currently, the browser launches with `/` in the address bar.
When the app starts, it should show the dashboard and
display a `/dashboard` URL in the browser address bar.
To make this happen, use a redirect route. Add the following
to the array of route definitions:
Read more about *redirects* in the [Redirecting routes](guide/router) section
of the [Routing & Navigation](guide/router) page.
### Add navigation to the template
Add a dashboard navigation link to the template, just above the *Heroes* link.
The `
In your browser, go to the application root (`/`) and reload.
The app displays the dashboard and you can navigate between the dashboard and the heroes.
## Add heroes to the dashboard
To make the dashboard more interesting, you'll display the top four heroes at a glance.
Replace the `template` metadata with a `templateUrl` property that points to a new
template file.
Create that file with this content:
`*ngFor` is used again to iterate over a list of heroes and display their names.
The extra `
` elements will help with styling later.
### Sharing the *HeroService*
To populate the component's `heroes` array, you can re-use the `HeroService`.
Earlier, you removed the `HeroService` from the `providers` array of `HeroesComponent`
and added it to the `providers` array of `AppModule`.
That move created a singleton `HeroService` instance, available to all components of the app.
Angular injects `HeroService` and you can use it in the `DashboardComponent`.
### Get heroes
In dashboard.component.ts, add the following `import` statements.
Now create the `DashboardComponent` class like this:
This kind of logic is also used in the `HeroesComponent`:
* Define a `heroes` array property.
* Inject the `HeroService` in the constructor and hold it in a private `heroService` field.
* Call the service to get heroes inside the Angular `ngOnInit()` lifecycle hook.
In this dashboard you specify four heroes (2nd, 3rd, 4th, and 5th) with the `Array.slice` method.
Refresh the browser to see four hero names in the new dashboard.
## Navigating to hero details
While the details of a selected hero displays at the bottom of the `HeroesComponent`,
users should be able to navigate to the `HeroDetailComponent` in the following additional ways:
* From the dashboard to a selected hero.
* From the heroes list to a selected hero.
* From a "deep link" URL pasted into the browser address bar.
### Routing to a hero detail
You can add a route to the `HeroDetailComponent` in `app.module.ts`, where the other routes are configured.
The new route is unusual in that you must tell the `HeroDetailComponent` which hero to show.
You didn't have to tell the `HeroesComponent` or the `DashboardComponent` anything.
Currently, the parent `HeroesComponent` sets the component's `hero` property to a
hero object with a binding like this:
<hero-detail [hero]="selectedHero"></hero-detail>
But this binding won't work in any of the routing scenarios.
### Parameterized route
You can add the hero's `id` to the URL. When routing to the hero whose `id` is 11,
you could expect to see a URL such as this:
/detail/11
The `/detail/` part of the URL is constant. The trailing numeric `id` changes from hero to hero.
You need to represent the variable part of the route with a *parameter* (or *token*) that stands for the hero's `id`.
### Configure a route with a parameter
Use the following *route definition*.
The colon (:) in the path indicates that `:id` is a placeholder for a specific hero `id`
when navigating to the `HeroDetailComponent`.
Be sure to import the hero detail component before creating this route.
You're finished with the app routes.
You didn't add a `'Hero Detail'` link to the template because users
don't click a navigation *link* to view a particular hero;
they click a *hero name*, whether the name displays on the dashboard or in the heroes list.
You don't need to add the hero clicks until the `HeroDetailComponent`
is revised and ready to be navigated to.
## Revise the *HeroDetailComponent*
Here's what the `HeroDetailComponent` looks like now:
The template won't change. Hero names will display the same way.
The major changes are driven by how you get hero names.
You'll no longer receive the hero in a parent component property binding.
The new `HeroDetailComponent` should take the `id` parameter from the `paramMap` Observable
in the `ActivatedRoute` service and use the `HeroService` to fetch the hero with that `id`.
Add the following imports:
Inject the `ActivatedRoute`, `HeroService`, and `Location` services
into the constructor, saving their values in private fields:
Import the `switchMap` operator to use later with the route parameters `Observable`.
Tell the class to implement the `OnInit` interface.
Inside the `ngOnInit()` lifecycle hook, use the `paramMap` Observable to
extract the `id` parameter value from the `ActivatedRoute` service
and use the `HeroService` to fetch the hero with that `id`.
The `switchMap` operator maps the `id` in the Observable route parameters
to a new `Observable`, the result of the `HeroService.getHero()` method.
If a user re-navigates to this component while a `getHero` request is still processing,
`switchMap` cancels the old request and then calls `HeroService.getHero()` again.
The hero `id` is a number. Route parameters are always strings.
So the route parameter value is converted to a number with the JavaScript (+) operator.
### Do you need to unsubscribe?
As described in the [ActivatedRoute: the one-stop-shop for route information](guide/router#activated-route)
section of the [Routing & Navigation](guide/router) page,
the `Router` manages the observables it provides and localizes
the subscriptions. The subscriptions are cleaned up when the component is destroyed, protecting against
memory leaks, so you don't need to unsubscribe from the route `paramMap` `Observable`.
### Add *HeroService.getHero()*
In the previous code snippet, `HeroService` doesn't have a `getHero()` method. To fix this issue,
open `HeroService` and add a `getHero()` method that filters the heroes list from `getHeroes()` by `id`.
### Find the way back
Users have several ways to navigate *to* the `HeroDetailComponent`.
To navigate somewhere else, users can click one of the two links in the `AppComponent` or click the browser's back button.
Now add a third option, a `goBack()` method that navigates backward one step in the browser's history stack
using the `Location` service you injected previously.
Going back too far could take users out of the app.
In a real app, you can prevent this issue with the CanDeactivate guard.
Read more on the [CanDeactivate](api/router/CanDeactivate) page.
You'll wire this method with an event binding to a *Back* button that you'll add to the component template.
Migrate the template to its own file
called hero-detail.component.html:
Update the component metadata with a `templateUrl` pointing to the template file that you just created.
Refresh the browser and see the results.
## Select a dashboard hero
When a user selects a hero in the dashboard, the app should navigate to the `HeroDetailComponent` to view and edit the selected hero.
Although the dashboard heroes are presented as button-like blocks, they should behave like anchor tags.
When hovering over a hero block, the target URL should display in the browser status bar
and the user should be able to copy the link or open the hero detail view in a new tab.
To achieve this effect, reopen `dashboard.component.html` and replace the repeated `
