org.hl7.fhir.core/org.hl7.fhir.convertors
markiantorno 0cebf9af9f Updating version to: 6.3.4-SNAPSHOT and incrementing test cases dependency. 2024-03-20 13:31:17 +00:00
..
src OID Assigner utility 2024-03-14 16:45:32 +11:00
README.md Update Conversion package docs (#1257) 2023-05-09 17:33:55 -04:00
checkstyle_suppressions.xml Add basic checkstyle plugin config (#1122) 2023-02-24 15:05:49 -05:00
pom.xml Updating version to: 6.3.4-SNAPSHOT and incrementing test cases dependency. 2024-03-20 13:31:17 +00:00

README.md

Resource Conversion

IMPORTANT


The conversion code in this module is maintained as part of the development of the standard, but always under considerable time pressure. Only part of the code is rigorously tested as detailed here. Implementers should regard this code as a 'scaffold' for actual reliable conversions.

ALWAYS TEST ANY CONVERSION ROUTINES BEFORE USING THEM IN PRODUCTION!

Ideally, this should be via unit tests in your code, or better yet unit tests contributed to FHIR.

Using the Conversion package

Basic Usage

The majority of conversion tasks should be performed by the Version Convertor factories:

  • VersionConvertorFactory_10_30
  • VersionConvertorFactory_10_40
  • VersionConvertorFactory_10_50
  • VersionConvertorFactory_14_30
  • VersionConvertorFactory_14_40
  • VersionConvertorFactory_14_50
  • VersionConvertorFactory_30_40
  • VersionConvertorFactory_30_50
  • VersionConvertorFactory_40_50
  • VersionConvertorFactory_43_50

These factories all use the following convention:

VersionConvertorFactory_ + (VERSION A) + _ + (VERSION B)

Each factory allows conversion between two versions of FHIR, specified by VERSION A and VERSION B. The syntax of each version is described briefly in the following section.

Conversion Version Syntax


Within the code, we use a set naming convention to organize the classes used for conversion between the various versions of FHIR.

Version Code
dstu2 10
dstu2016may 14
dstu3 30
r4 40
r5 50

So, for example, VersionConvertorFactory_10_40 allows the conversion of resources and types to and from dtu2 (10) and r4 (50).

Conversion Factory Usage


Each VersionConvertorFactory provides two statically accessed base methods for converting resources:

public static (V1 Resource) convertResource((V2 Resource) src)

public static (V2 Resource) convertResource((V1 Resource) src)

as well as two statically accessed base methods for converting types:

public static (V1 Type) convertType((V2 Type) src)

public static (V2 Type) convertType((V1 Type) src)

It's important to note that these methods convert from the base Resource of one version to the base Resource of another version, or from the base Type of one version to the base Type of another version (or DataType in the case of r5), so the result will need to be cast to the correct class.

Example:

  // Converting a r4 AllergyIntolerance to r5.
  org.hl7.fhir.r5.model.Resource r5Resource = VersionConvertorFactory_40_50.convertResource(r4AllergyIntolerance);
  org.hl7.fhir.r5.model.AllergyIntolerance r5AllergyIntolerance = (org.hl7.fhir.r5.model.AllergyIntolerance) r5Resource;

Developers Notes

If you are developing or debugging conversion routines, you will likely need to access the individual Resource, DataType, and Primitive conversion classes.

These are located in the following packages:

  • org.hl7.fhir.convertors.conv10_30
  • org.hl7.fhir.convertors.conv10_40
  • org.hl7.fhir.convertors.conv10_50
  • org.hl7.fhir.convertors.conv14_30
  • org.hl7.fhir.convertors.conv14_40
  • org.hl7.fhir.convertors.conv14_50
  • org.hl7.fhir.convertors.conv30_40
  • org.hl7.fhir.convertors.conv30_50
  • org.hl7.fhir.convertors.conv40_50
  • org.hl7.fhir.convertors.conv43_50

These classes follow the convention:

(NAME) + (VERSION A) + _ + (VERSION B)

Where NAME is the proper name of the resource or datatype being converted, and VERSION A and VERSION B indicate the two versions of FHIR that the code will convert the given resource or datatype between (See Conversion Version Syntax for version details).

So, in the repository, you may come across a file name AllergyIntolerance40_50. This would indicate that the code in this file is related to the conversion of the AllergyIntolerance resource between versions r4 and r5

Note that these classes are not intended to be used directly. When actually converting resources, the provided conversion factory classes are intended to be used as the entry point. For example, to convert a dstu3 AllergyIntolerance resource, the above conversion would not use AllergyIntolerance40_50 directly, but would instead call: VersionConvertorFactory_40_50.convertResource(dstu3AllergyIntolerance). VersionConvertorFactory_40_50 would call AllergyIntolerance40_50 internally to convert r4AllergyIntolerance.

Common Conversion Scenarios

Conversion classes are implemented using some simple, repeatable patterns. AllegeryIntolerance40_50 will be used as an example of this. Each conversion class for a resource will have two entry points, allowing for conversions to be done to and from the two versions in the convertor.

public static org.hl7.fhir.r5.model.AllergyIntolerance convertAllergyIntolerance(org.hl7.fhir.r4.model.AllergyIntolerance src);
public static org.hl7.fhir.r4.model.AllergyIntolerance convertAllergyIntolerance(org.hl7.fhir.r5.model.AllergyIntolerance src)

Initially, a target resource is created in the appropriate method. Upon the completion of the conversion, this target resource is returned. In our case, the target resource is version 50, or r5.

public static org.hl7.fhir.r5.model.AllergyIntolerance convertAllergyIntolerance(org.hl7.fhir.r4.model.AllergyIntolerance src){
    
  //...
  
  org.hl7.fhir.r5.model.AllergyIntolerance tgt = new org.hl7.fhir.r5.model.AllergyIntolerance();
	
  //...
}

After the target resource is created, the elements of the source resource need to be converted to the target version, and added to the target resource. Many elements can be copied automatically using the static methods provided in the ConversionContext and VersionConvertor classes. These classes follow the convention:

ConversionContext + (VERSION A) + _ + (VERSION B)

and

VersionConvertor + (VERSION A) + _ + (VERSION B)

An example usage is in the copying of DomainResource elements (text, contained, extension, and modifierExtension). In FHIR, all listed Resources except Bundle, Parameters and Binary extend DomainResource. Copying DomainResource elements is done using the following code:

ConversionContext40_50.INSTANCE.getVersionConvertor_40_50().copyDomainResource(src, tgt);

For elements more specific to the resource being converted, we find the appropriate type convertor class, and set the target element directly:

if (src.hasClinicalStatus())
    tgt.setClinicalStatus(CodeableConcept40_50.convertCodeableConcept(src.getClinicalStatus()));

Converting Extensions

A special case exists for the conversion of extensions. As mentioned above, the copyDomainResource(src, tgt) method is used to copy the extensions from one resource to another. This applies a default conversion process to all extensions (see Using conversion advisors for details).

However, in some conversion cases, an extension may exist that can be converted into a resource element. An example of this is the acceptUnknown element in the dstu3 CapabilityStatement resource. This element does not exist in versions r4 and up, so is converted into an extension with the url http://hl7.org/fhir/3.0/StructureDefinition/extension-CapabilityStatement.acceptUnknown. Should this extension exist in a resource being converted to a CapabilityStatement in dstu3, the convertor needs to convert this extension to an element, and to indicate to the copyDomainResource method that the extension should not be copied.

First, since the copyDomainResource occurs early in the conversion process, we need to indicate all the ignored URLs using the vararg parameter extensionUrlsToIgnore:

// Call copyDomainResource(DomainResource src, DomainResource tgt, String... extensionUrlsToIgnore)
ConversionContext30_50.INSTANCE.getVersionConvertor_30_50().copyDomainResource(src, tgt, ACCEPT_UNKNOWN_EXTENSION_URL);

Then, we need to handle any instances matching that extension URL. In this case, the acceptUnknown element can be set.

  if (src.hasExtension(ACCEPT_UNKNOWN_EXTENSION_URL))
		tgt.setAcceptUnknown(org.hl7.fhir.dstu3.model.CapabilityStatement.UnknownContentCode.fromCode(src.getExtensionByUrl(ACCEPT_UNKNOWN_EXTENSION_URL).getValue().primitiveValue()));

A similar pattern is used to manage extensions in resource elements:

copyElement(DomainResource src, DomainResource tgt,, String... extensionUrlsToIgnore)

After all necessary elements are converted, the conversion is complete, and the target resource is returned.

Extending Conversion Functionality

As the FHIR specification has evolved over time, the versions of FHIR have built on top of one another, adding new fields within existing resources, changing the name of existing resources, or adding entirely new resources altogether. As a result of this conversions are inherently lossy operations.

A quick example of this would be ValueSet Expression extension type. This exists in the r4 version of the specification, but no such type exists in dstu2.

If we were to convert a R4 resource, such as a questionnaire, that contained an extension of this type from r4 -> dstu2, without any special intervention, the extension would be ignored, and the data would be lost in the conversion process.

This is where advisors come in.

Using conversion advisors


When you call the base conversion factory methods convertType(...) or convertResource(...), the library does a predefined conversion, using the standard conversion (which could be a lossy one, or one that makes assumptions).

These defaults/assumptions are defined in the convertor advisor classes. Each pair of versions has a BaseAdvisor, which is used by default when you call the factory methods. For example, here is the advisor class which handles conversions between dstu2 and r5:

public class BaseAdvisor_10_50 extends BaseAdvisor50<org.hl7.fhir.dstu2.model.Extension> {
 
  private final List<Class<?>> ignoredExtensionTypes = new ArrayList<>(Collections.singletonList(Expression.class));

  public BaseAdvisor_10_50() {
  }

  public BaseAdvisor_10_50(Boolean failFast) {
    this.failFast = failFast;
  }

  public boolean ignoreExtension(@Nonnull String path,
                                 @Nonnull String url) {
	  // no globally ignored extensions here.
	  return false;
  }

  public boolean ignoreType(@Nonnull String path,
                            @Nonnull DataType type) {
    return ignoredExtensionTypes.contains(type.getClass());
  }
}

You can see in the ignoreType implementation above that we check if we are converting a DataType of the Expression class. The Expression DataType did not exist in dstu2, and is ignored when doing this particular conversion.

As mentioned above, we provide a stock set of implied conversion rules that are used by default. However, there may be cases where you need to add specific behavior to your conversion. Within the BaseAdvisor class, there exist a number of overrideable methods that can be used to modify the outcome of any given conversion:

  public void handleCodeSystem(@Nonnull CodeSystem tgtcs, @Nonnull ValueSet source)

  public boolean ignoreEntry(@Nonnull Bundle.BundleEntryComponent src, @Nonnull FhirPublication targetVersion)

  public CodeSystem getCodeSystem(@Nonnull ValueSet src) throws FHIRException

  public boolean ignoreExtension(@Nonnull String path, @Nonnull Extension ext) throws FHIRException

  public boolean ignoreExtension(@Nonnull String path, @Nonnull T ext) throws FHIRException

  public boolean ignoreExtension(@Nonnull String path, @Nonnull String url) throws FHIRException

  public boolean ignoreType(@Nonnull String path, @Nonnull DataType type) throws FHIRException

  public boolean ignoreType(@Nonnull String path, @Nonnull Object type) throws FHIRException

  public boolean useAdvisorForExtension(@Nonnull String path, @Nonnull Extension ext) throws FHIRException

  public boolean useAdvisorForExtension(@Nonnull String path, @Nonnull T ext) throws FHIRException

  public void handleExtension(@Nonnull String path, @Nonnull Extension src, @Nonnull T tgt) throws FHIRException

  public void handleExtension(@Nonnull String path, @Nonnull T src, @Nonnull Extension tgt) throws FHIRException

Through overriding these methods and implementing your own custom advisor, you can customize the output of any given conversion operation to suit your specific use-case.

For example, the Expression extension type exists in the r5 version of the specification, but no such type exists in dstu2.

Our stock advisor just ignores this extension when converting from r5 to dstu2. However, if we wanted, we could create our own conversion advisor, as follows:

public class ExpressionAdvisor50 extends BaseAdvisor_10_50 {

	public boolean useAdvisorForExtension(@Nonnull String path, @Nonnull org.hl7.fhir.r5.model.Extension ext) {
		return ext.hasValue() && ext.getValue() instanceof org.hl7.fhir.r5.model.Expression;
	}

	public void handleExtension(@Nonnull String path,
								@Nonnull org.hl7.fhir.r5.model.Extension src,
								@Nonnull org.hl7.fhir.dstu2.model.Extension tgt) {
		if (src.getValue() instanceof org.hl7.fhir.r5.model.Expression) {
			StringType type = new StringType();
			if (src.getValue() == null) {
				throw new NullPointerException("null cannot be cast to non-null type org.hl7.fhir.r5.model.Expression");
			} else {
				type.setValueAsString(((Expression) src.getValue()).getExpression());
				tgt.setValue(type);
				if (src.hasUrlElement()) {
					tgt.setUrlElement(Uri10_50.convertUri(src.getUrlElement()));
				}
			}
		} else {
			throw new FHIRException("Unknown extension type passed in to custom convertor method.");
		}
	}
}

Here, we first check to see if the extension is of type org.hl7.fhir.r5.model.Expression and has a value set in the useAdvisorForExtension method, then in the handleExtension method, we manually create a StringType extension, and copy the value from the r5 Expression into it. This results in no data being lost, and a the new custom conversion behavior for our particular use-case.

Once you've created your new advisor, they can be provided as an argument when calling the conversion factory classes.

public static (V1 Resource) convertResource((V2 Resource) src, <T extends BaseAdvisor> advisor)

public static (V2 Resource) convertResource((V1 Resource) src, <T extends BaseAdvisor> advisor)

For example, the example ExpressionAdvisor50 class can be used in converting a Questionnaire resource like so:

VersionConvertorFactory_10_50.convertResource(r5_input, new ExpressionAdvisor50());

Development notes


Reliable conversion code

The FHIR project maintains and tests conversions on the following resources, from old versions to R5:

  • CodeSystem
  • ValueSet
  • ConceptMap
  • StructureDefinition
  • StructureMap
  • ImplementationGuide
  • CapabilityStatement
  • OperationDefinition
  • NamingSystem

These can be relied on and are subject to extensive testing.

Test cases

Some conversions have test cases for particular resources and particular version combinations. Where test cases exist, they will continue to be maintained and expected to pass.

Contributing test cases is highly encouraged! To contribute, create a PRs to the core library, or even better, to the FHIR test cases library.