--- description: Run the Docker daemon as a non-root user (Rootless mode) keywords: security, namespaces, rootless title: Run the Docker daemon as a non-root user (Rootless mode) --- Rootless mode allows running the Docker daemon and containers as a non-root user to mitigate potential vulnerabilities in the daemon and the container runtime. Rootless mode does not require root privileges even during the installation of the Docker daemon, as long as the [prerequisites](#prerequisites) are met. Rootless mode was introduced in Docker Engine v19.03. > **Note** > > Rootless mode is an experimental feature and has some limitations. For details, > see [Known limitations](#known-limitations). ## How it works Rootless mode executes the Docker daemon and containers inside a user namespace. This is very similar to [`userns-remap` mode](userns-remap.md), except that with `userns-remap` mode, the daemon itself is running with root privileges, whereas in rootless mode, both the daemon and the container are running without root privileges. Rootless mode does not use binaries with `SETUID` bits or file capabilities, except `newuidmap` and `newgidmap`, which are needed to allow multiple UIDs/GIDs to be used in the user namespace. ## Prerequisites - You must install `newuidmap` and `newgidmap` on the host. These commands are provided by the `uidmap` package on most distros. - `/etc/subuid` and `/etc/subgid` should contain at least 65,536 subordinate UIDs/GIDs for the user. In the following example, the user `testuser` has 65,536 subordinate UIDs/GIDs (231072-296607). ```console $ id -u 1001 $ whoami testuser $ grep ^$(whoami): /etc/subuid testuser:231072:65536 $ grep ^$(whoami): /etc/subgid testuser:231072:65536 ``` ### Distribution-specific hint > Note: We recommend that you use the Ubuntu kernel. #### Ubuntu - No preparation is needed. - `overlay2` storage driver is enabled by default ([Ubuntu-specific kernel patch](https://kernel.ubuntu.com/git/ubuntu/ubuntu-bionic.git/commit/fs/overlayfs?id=3b7da90f28fe1ed4b79ef2d994c81efbc58f1144)). - Known to work on Ubuntu 16.04, 18.04, and 20.04. #### Debian GNU/Linux - Add `kernel.unprivileged_userns_clone=1` to `/etc/sysctl.conf` (or `/etc/sysctl.d`) and run `sudo sysctl --system`. - To use the `overlay2` storage driver (recommended), run `sudo modprobe overlay permit_mounts_in_userns=1` ([Debian-specific kernel patch, introduced in Debian 10](https://salsa.debian.org/kernel-team/linux/blob/283390e7feb21b47779b48e0c8eb0cc409d2c815/debian/patches/debian/overlayfs-permit-mounts-in-userns.patch)). Add the configuration to `/etc/modprobe.d` for persistence. - Known to work on Debian 9 and 10. `overlay2` is only supported since Debian 10 and needs `modprobe` configuration described above. #### Arch Linux - Add `kernel.unprivileged_userns_clone=1` to `/etc/sysctl.conf` (or `/etc/sysctl.d`) and run `sudo sysctl --system` #### openSUSE - `sudo modprobe ip_tables iptable_mangle iptable_nat iptable_filter` is required. This might be required on other distros as well depending on the configuration. - Known to work on openSUSE 15. #### Fedora 31 and later - Fedora 31 uses cgroup v2 by default, which is not yet supported by the containerd runtime. Run `sudo grubby --update-kernel=ALL --args="systemd.unified_cgroup_hierarchy=0"` to use cgroup v1. - You might need `sudo dnf install -y iptables`. #### CentOS 8 - You might need `sudo dnf install -y iptables`. #### CentOS 7 - Add `user.max_user_namespaces=28633` to `/etc/sysctl.conf` (or `/etc/sysctl.d`) and run `sudo sysctl --system`. - `systemctl --user` does not work by default. Run the daemon directly without systemd: `dockerd-rootless.sh --experimental --storage-driver vfs` - Known to work on CentOS 7.7. Older releases require additional configuration steps. - CentOS 7.6 and older releases require [COPR package `vbatts/shadow-utils-newxidmap`](https://copr.fedorainfracloud.org/coprs/vbatts/shadow-utils-newxidmap/) to be installed. - CentOS 7.5 and older releases require running `sudo grubby --update-kernel=ALL --args="user_namespace.enable=1"` and a reboot following this. ## Known limitations - Only `vfs` graphdriver is supported. However, on Ubuntu and Debian 10, `overlay2` and `overlay` are also supported. - Following features are not supported: - Cgroups (including `docker top`, which depends on the cgroups) - AppArmor - Checkpoint - Overlay network - Exposing SCTP ports - To use the `ping` command, see [Routing ping packets](#routing-ping-packets). - To expose privileged TCP/UDP ports (< 1024), see [Exposing privileged ports](#exposing-privileged-ports). - `IPAddress` shown in `docker inspect` and is namespaced inside RootlessKit's network namespace. This means the IP address is not reachable from the host without `nsenter`-ing into the network namespace. - Host network (`docker run --net=host`) is also namespaced inside RootlessKit. ## Install The installation script is available at [https://get.docker.com/rootless](https://get.docker.com/rootless){: target="_blank" rel="noopener" class="_" }. ```console $ curl -fsSL https://get.docker.com/rootless | sh ``` Make sure to run the script as a non-root user. To install Rootless Docker as the root user, see the [Manual installation](#manual-installation) steps. The script shows environment variables that are required: ```console $ curl -fsSL https://get.docker.com/rootless | sh ... # Docker binaries are installed in /home/testuser/bin # WARN: dockerd is not in your current PATH or pointing to /home/testuser/bin/dockerd # Make sure the following environment variables are set (or add them to ~/.bashrc): export PATH=/home/testuser/bin:$PATH export PATH=$PATH:/sbin export DOCKER_HOST=unix:///run/user/1001/docker.sock # # To control docker service run: # systemctl --user (start|stop|restart) docker # ``` ### Manual installation To install the binaries manually without using the installer, extract `docker-rootless-extras-.tgz` along with `docker-.tgz` from [https://download.docker.com/linux/static/stable/x86\_64/](https://download.docker.com/linux/static/stable/x86_64/){: target="_blank" rel="noopener" class="_" } If you already have the Docker daemon running as the root, you only need to extract `docker-rootless-extras-.tgz`. The archive can be extracted under an arbitrary directory listed in the `$PATH`. For example, `/usr/local/bin`, or `$HOME/bin`. ### Nightly channel To install a nightly version of the Rootless Docker, run the installation script using `CHANNEL="nightly"`: ```console $ curl -fsSL https://get.docker.com/rootless | CHANNEL="nightly" sh ``` The raw binary archives are available at: - https://master.dockerproject.org/linux/x86\_64/docker-rootless-extras.tgz - https://master.dockerproject.org/linux/x86\_64/docker.tgz ## Usage ### Daemon Use `systemctl --user` to manage the lifecycle of the daemon: ```console $ systemctl --user start docker ``` To launch the daemon on system startup, enable the systemd service and lingering: ```console $ systemctl --user enable docker $ sudo loginctl enable-linger $(whoami) ``` To run the daemon directly without systemd, you need to run `dockerd-rootless.sh` instead of `dockerd`: ```console $ dockerd-rootless.sh --experimental --storage-driver vfs ``` As Rootless mode is experimental, you need to run `dockerd-rootless.sh` with `--experimental`. You also need `--storage-driver vfs` unless you are using Ubuntu or Debian 10 kernel. You don't need to care about these flags if you manage the daemon using systemd, as these flags are automatically added to the systemd unit file. Remarks about directory paths: - The socket path is set to `$XDG_RUNTIME_DIR/docker.sock` by default. `$XDG_RUNTIME_DIR` is typically set to `/run/user/$UID`. - The data dir is set to `~/.local/share/docker` by default. - The exec dir is set to `$XDG_RUNTIME_DIR/docker` by default. - The daemon config dir is set to `~/.config/docker` (not `~/.docker`, which is used by the client) by default. Other remarks: - The `dockerd-rootless.sh` script executes `dockerd` in its own user, mount, and network namespaces. You can enter the namespaces by running `nsenter -U --preserve-credentials -n -m -t $(cat $XDG_RUNTIME_DIR/docker.pid)`. - `docker info` shows `rootless` in `SecurityOptions` - `docker info` shows `none` as `Cgroup Driver` ### Client You need to specify the socket path explicitly. To specify the socket path using `$DOCKER_HOST`: ```console $ export DOCKER_HOST=unix://$XDG_RUNTIME_DIR/docker.sock $ docker run -d -p 8080:80 nginx ``` To specify the socket path using `docker context`: ```console $ docker context create rootless --description "for rootless mode" --docker "host=unix://$XDG_RUNTIME_DIR/docker.sock" rootless Successfully created context "rootless" $ docker context use rootless rootless Current context is now "rootless" $ docker run -d -p 8080:80 nginx ``` ## Best practices ### Rootless Docker in Docker To run Rootless Docker inside "rootful" Docker, use the `docker:-dind-rootless` image instead of `docker:-dind`. ```console $ docker run -d --name dind-rootless --privileged docker:19.03-dind-rootless --experimental ``` The `docker:-dind-rootless` image runs as a non-root user (UID 1000). However, `--privileged` is required for disabling seccomp, AppArmor, and mount masks. ### Expose Docker API socket through TCP To expose the Docker API socket through TCP, you need to launch `dockerd-rootless.sh` with `DOCKERD_ROOTLESS_ROOTLESSKIT_FLAGS="-p 0.0.0.0:2376:2376/tcp"`. ```console $ DOCKERD_ROOTLESS_ROOTLESSKIT_FLAGS="-p 0.0.0.0:2376:2376/tcp" \ dockerd-rootless.sh --experimental \ -H tcp://0.0.0.0:2376 \ --tlsverify --tlscacert=ca.pem --tlscert=cert.pem --tlskey=key.pem ``` ### Expose Docker API socket through SSH To expose the Docker API socket through SSH, you need to make sure `$DOCKER_HOST` is set on the remote host. ```console $ ssh -l 'echo $DOCKER_HOST' unix:///run/user/1001/docker.sock $ docker -H ssh://@ run ... ``` ### Routing ping packets On some distributions, `ping` does not work by default. Add `net.ipv4.ping_group_range = 0 2147483647` to `/etc/sysctl.conf` (or `/etc/sysctl.d`) and run `sudo sysctl --system` to allow using `ping`. ### Exposing privileged ports To expose privileged ports (< 1024), set `CAP_NET_BIND_SERVICE` on `rootlesskit` binary. ```console $ sudo setcap cap_net_bind_service=ep $HOME/bin/rootlesskit ``` Or add `net.ipv4.ip_unprivileged_port_start=0` to `/etc/sysctl.conf` (or `/etc/sysctl.d`) and run `sudo sysctl --system`. ### Limiting resources In Docker 19.03, rootless mode ignores cgroup-related `docker run` flags such as `--cpus`, `--memory`, `--pids-limit`. However, you can still use the traditional `ulimit` and [`cpulimit`](https://github.com/opsengine/cpulimit), though they work in process-granularity rather than in container-granularity, and can be arbitrarily disabled by the container process. For example: - To limit CPU usage to 0.5 cores (similar to `docker run --cpus 0.5`): `docker run cpulimit --limit=50 --include-children ` - To limit max VSZ to 64MiB (similar to `docker run --memory 64m`): `docker run sh -c "ulimit -v 65536; "` - To limit max number of processes to 100 per namespaced UID 2000 (similar to `docker run --pids-limit=100`): `docker run --user 2000 --ulimit nproc=100 ` ### Changing the network stack `dockerd-rootless.sh` uses [slirp4netns](https://github.com/rootless-containers/slirp4netns) (if installed) or [VPNKit](https://github.com/moby/vpnkit) as the network stack by default. These network stacks run in userspace and might have performance overhead. See [RootlessKit documentation](https://github.com/rootless-containers/rootlesskit/tree/v0.9.5#network-drivers) for further information. Optionally, you can use `lxc-user-nic` instead for the best performance. To use `lxc-user-nic`, you need to edit [`/etc/lxc/lxc-usernet`](https://github.com/rootless-containers/rootlesskit/tree/v0.9.5#--netlxc-user-nic-experimental) and set `$DOCKERD_ROOTLESS_ROOTLESSKIT_NET=lxc-user-nic`. ## Troubleshooting ### Errors when starting the Docker daemon **[rootlesskit:parent] error: failed to start the child: fork/exec /proc/self/exe: operation not permitted** This error occurs mostly when the value of `/proc/sys/kernel/unprivileged_userns_clone ` is set to 0: ```console $ cat /proc/sys/kernel/unprivileged_userns_clone 0 ``` To fix this issue, add `kernel.unprivileged_userns_clone=1` to `/etc/sysctl.conf` (or `/etc/sysctl.d`) and run `sudo sysctl --system`. **[rootlesskit:parent] error: failed to start the child: fork/exec /proc/self/exe: no space left on device** This error occurs mostly when the value of `/proc/sys/user/max_user_namespaces` is too small: ```console $ cat /proc/sys/user/max_user_namespaces 0 ``` To fix this issue, add `user.max_user_namespaces=28633` to `/etc/sysctl.conf` (or `/etc/sysctl.d`) and run `sudo sysctl --system`. **[rootlesskit:parent] error: failed to setup UID/GID map: failed to compute uid/gid map: No subuid ranges found for user 1001 ("testuser")** This error occurs when `/etc/subuid` and `/etc/subgid` are not configured. See [Prerequisites](#prerequisites). **could not get XDG_RUNTIME_DIR** This error occurs when `$XDG_RUNTIME_DIR` is not set. On a non-systemd host, you need to create a directory and then set the path: ```console $ export XDG_RUNTIME_DIR=$HOME/.docker/xrd $ rm -rf $XDG_RUNTIME_DIR $ mkdir -p $XDG_RUNTIME_DIR $ dockerd-rootless.sh --experimental ``` > **Note**: > You must remove the directory every time you log out. On a systemd host, log into the host using `pam_systemd` (see below). The value is automatically set to `/run/user/$UID` and cleaned up on every logout. **`systemctl --user` fails with "Failed to connect to bus: No such file or directory"** This error occurs mostly when you switch from the root user to an non-root user with `sudo`: ```console # sudo -iu testuser $ systemctl --user start docker Failed to connect to bus: No such file or directory ``` Instead of `sudo -iu `, you need to log in using `pam_systemd`. For example: - Log in through the graphic console - `ssh @localhost` - `machinectl shell @` **The daemon does not start up automatically** You need `sudo loginctl enable-linger $(whoami)` to enable the daemon to start up automatically. See [Usage](#usage). **`dockerd` fails with "rootless mode is supported only when running in experimental mode"** This error occurs when the daemon is launched without the `--experimental` flag. See [Usage](#usage). ### `docker pull` errors **docker: failed to register layer: Error processing tar file(exit status 1): lchown <FILE>: invalid argument** This error occurs when the number of available entries in `/etc/subuid` or `/etc/subgid` is not sufficient. The number of entries required vary across images. However, 65,536 entries are sufficient for most images. See [Prerequisites](#prerequisites). ### `docker run` errors **`--cpus`, `--memory`, and `--pids-limit` are ignored** This is an expected behavior in Docker 19.03. For more information, see [Limiting resources](#limiting-resources). **Error response from daemon: cgroups: cgroup mountpoint does not exist: unknown.** This error occurs mostly when the host is running in cgroup v2. See the section [Fedora 31 or later](#fedora-31-or-later) for information on switching the host to use cgroup v1. ### Networking errors **`docker run -p` fails with `cannot expose privileged port`** `docker run -p` fails with this error when a privileged port (< 1024) is specified as the host port. ```console $ docker run -p 80:80 nginx:alpine docker: Error response from daemon: driver failed programming external connectivity on endpoint focused_swanson (9e2e139a9d8fc92b37c36edfa6214a6e986fa2028c0cc359812f685173fa6df7): Error starting userland proxy: error while calling PortManager.AddPort(): cannot expose privileged port 80, you might need to add "net.ipv4.ip_unprivileged_port_start=0" (currently 1024) to /etc/sysctl.conf, or set CAP_NET_BIND_SERVICE on rootlesskit binary, or choose a larger port number (>= 1024): listen tcp 0.0.0.0:80: bind: permission denied. ``` When you experience this error, consider using an unprivileged port instead. For example, 8080 instead of 80. ```console $ docker run -p 8080:80 nginx:alpine ``` To allow exposing privileged ports, see [Exposing privileged ports](#exposing-privileged-ports). **ping doesn't work** Ping does not work when `/proc/sys/net/ipv4/ping_group_range` is set to `1 0`: ```console $ cat /proc/sys/net/ipv4/ping_group_range 1 0 ``` For details, see [Routing ping packets](#routing-ping-packets). **`IPAddress` shown in `docker inspect` is unreachable** This is an expected behavior, as the daemon is namespaced inside RootlessKit's network namespace. Use `docker run -p` instead. **`--net=host` doesn't listen ports on the host network namespace** This is an expected behavior, as the daemon is namespaced inside RootlessKit's network namespace. Use `docker run -p` instead.