2015-08-20 16:19:34 -04:00
|
|
|
'use strict';
|
|
|
|
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
describe('Navigation lifecycle', function () {
|
2015-08-20 16:19:34 -04:00
|
|
|
var elt,
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
$compile,
|
|
|
|
$rootScope,
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter,
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
$compileProvider;
|
2015-08-20 16:19:34 -04:00
|
|
|
|
|
|
|
beforeEach(function () {
|
|
|
|
module('ng');
|
|
|
|
module('ngComponentRouter');
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
module(function (_$compileProvider_) {
|
|
|
|
$compileProvider = _$compileProvider_;
|
2015-08-20 16:19:34 -04:00
|
|
|
});
|
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
inject(function (_$compile_, _$rootScope_, _$rootRouter_) {
|
2015-08-20 16:19:34 -04:00
|
|
|
$compile = _$compile_;
|
|
|
|
$rootScope = _$rootScope_;
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter = _$rootRouter_;
|
2015-08-20 16:19:34 -04:00
|
|
|
});
|
|
|
|
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
registerComponent('oneCmp', {
|
|
|
|
template: '<div>{{oneCmp.number}}</div>',
|
|
|
|
controller: function () {this.number = 'one'}
|
|
|
|
});
|
|
|
|
registerComponent('twoCmp', {
|
|
|
|
template: '<div><a ng-link="[\'/Two\']">{{twoCmp.number}}</a></div>',
|
|
|
|
controller: function () {this.number = 'two'}
|
2015-08-20 16:19:34 -04:00
|
|
|
});
|
|
|
|
});
|
|
|
|
|
|
|
|
|
|
|
|
it('should run the activate hook of controllers', function () {
|
|
|
|
var spy = jasmine.createSpy('activate');
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
registerComponent('activateCmp', {
|
|
|
|
template: '<p>hello</p>',
|
refactor(lifecycle): prefix lifecycle methods with "ng"
BREAKING CHANGE:
Previously, components that would implement lifecycle interfaces would include methods
like "onChanges" or "afterViewInit." Given that components were at risk of using such
names without realizing that Angular would call the methods at different points of
the component lifecycle. This change adds an "ng" prefix to all lifecycle hook methods,
far reducing the risk of an accidental name collision.
To fix, just rename these methods:
* onInit
* onDestroy
* doCheck
* onChanges
* afterContentInit
* afterContentChecked
* afterViewInit
* afterViewChecked
* _Router Hooks_
* onActivate
* onReuse
* onDeactivate
* canReuse
* canDeactivate
To:
* ngOnInit,
* ngOnDestroy,
* ngDoCheck,
* ngOnChanges,
* ngAfterContentInit,
* ngAfterContentChecked,
* ngAfterViewInit,
* ngAfterViewChecked
* _Router Hooks_
* routerOnActivate
* routerOnReuse
* routerOnDeactivate
* routerCanReuse
* routerCanDeactivate
The names of lifecycle interfaces and enums have not changed, though interfaces
have been updated to reflect the new method names.
Closes #5036
2015-11-16 20:04:36 -05:00
|
|
|
$routerOnActivate: spy
|
2015-08-20 16:19:34 -04:00
|
|
|
});
|
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.config([
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
{ path: '/a', component: 'activateCmp' }
|
2015-08-20 16:19:34 -04:00
|
|
|
]);
|
|
|
|
compile('<div>outer { <div ng-outlet></div> }</div>');
|
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.navigateByUrl('/a');
|
2015-08-20 16:19:34 -04:00
|
|
|
$rootScope.$digest();
|
|
|
|
|
|
|
|
expect(spy).toHaveBeenCalled();
|
|
|
|
});
|
|
|
|
|
|
|
|
|
|
|
|
it('should pass instruction into the activate hook of a controller', function () {
|
|
|
|
var spy = jasmine.createSpy('activate');
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
registerComponent('userCmp', {
|
refactor(lifecycle): prefix lifecycle methods with "ng"
BREAKING CHANGE:
Previously, components that would implement lifecycle interfaces would include methods
like "onChanges" or "afterViewInit." Given that components were at risk of using such
names without realizing that Angular would call the methods at different points of
the component lifecycle. This change adds an "ng" prefix to all lifecycle hook methods,
far reducing the risk of an accidental name collision.
To fix, just rename these methods:
* onInit
* onDestroy
* doCheck
* onChanges
* afterContentInit
* afterContentChecked
* afterViewInit
* afterViewChecked
* _Router Hooks_
* onActivate
* onReuse
* onDeactivate
* canReuse
* canDeactivate
To:
* ngOnInit,
* ngOnDestroy,
* ngDoCheck,
* ngOnChanges,
* ngAfterContentInit,
* ngAfterContentChecked,
* ngAfterViewInit,
* ngAfterViewChecked
* _Router Hooks_
* routerOnActivate
* routerOnReuse
* routerOnDeactivate
* routerCanReuse
* routerCanDeactivate
The names of lifecycle interfaces and enums have not changed, though interfaces
have been updated to reflect the new method names.
Closes #5036
2015-11-16 20:04:36 -05:00
|
|
|
$routerOnActivate: spy
|
2015-08-20 16:19:34 -04:00
|
|
|
});
|
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.config([
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
{ path: '/user/:name', component: 'userCmp' }
|
2015-08-20 16:19:34 -04:00
|
|
|
]);
|
|
|
|
compile('<div ng-outlet></div>');
|
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.navigateByUrl('/user/brian');
|
2015-08-20 16:19:34 -04:00
|
|
|
$rootScope.$digest();
|
|
|
|
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
expect(spy).toHaveBeenCalledWith(instructionFor('userCmp'), undefined);
|
2015-08-20 16:19:34 -04:00
|
|
|
});
|
|
|
|
|
|
|
|
|
|
|
|
it('should pass previous instruction into the activate hook of a controller', function () {
|
|
|
|
var spy = jasmine.createSpy('activate');
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
var activate = registerComponent('activateCmp', {
|
|
|
|
template: 'hi',
|
refactor(lifecycle): prefix lifecycle methods with "ng"
BREAKING CHANGE:
Previously, components that would implement lifecycle interfaces would include methods
like "onChanges" or "afterViewInit." Given that components were at risk of using such
names without realizing that Angular would call the methods at different points of
the component lifecycle. This change adds an "ng" prefix to all lifecycle hook methods,
far reducing the risk of an accidental name collision.
To fix, just rename these methods:
* onInit
* onDestroy
* doCheck
* onChanges
* afterContentInit
* afterContentChecked
* afterViewInit
* afterViewChecked
* _Router Hooks_
* onActivate
* onReuse
* onDeactivate
* canReuse
* canDeactivate
To:
* ngOnInit,
* ngOnDestroy,
* ngDoCheck,
* ngOnChanges,
* ngAfterContentInit,
* ngAfterContentChecked,
* ngAfterViewInit,
* ngAfterViewChecked
* _Router Hooks_
* routerOnActivate
* routerOnReuse
* routerOnDeactivate
* routerCanReuse
* routerCanDeactivate
The names of lifecycle interfaces and enums have not changed, though interfaces
have been updated to reflect the new method names.
Closes #5036
2015-11-16 20:04:36 -05:00
|
|
|
$routerOnActivate: spy
|
2015-08-20 16:19:34 -04:00
|
|
|
});
|
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.config([
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
{ path: '/user/:name', component: 'oneCmp' },
|
|
|
|
{ path: '/post/:id', component: 'activateCmp' }
|
2015-08-20 16:19:34 -04:00
|
|
|
]);
|
|
|
|
compile('<div ng-outlet></div>');
|
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.navigateByUrl('/user/brian');
|
2015-08-20 16:19:34 -04:00
|
|
|
$rootScope.$digest();
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.navigateByUrl('/post/123');
|
2015-08-20 16:19:34 -04:00
|
|
|
$rootScope.$digest();
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
expect(spy).toHaveBeenCalledWith(instructionFor('activateCmp'),
|
|
|
|
instructionFor('oneCmp'));
|
2015-08-20 16:19:34 -04:00
|
|
|
});
|
|
|
|
|
|
|
|
it('should inject $scope into the controller constructor', function () {
|
|
|
|
var injectedScope;
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
registerComponent('userCmp', {
|
|
|
|
template: '',
|
|
|
|
controller: function ($scope) {
|
|
|
|
injectedScope = $scope;
|
|
|
|
}
|
2015-08-20 16:19:34 -04:00
|
|
|
});
|
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.config([
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
{ path: '/user', component: 'userCmp' }
|
2015-08-20 16:19:34 -04:00
|
|
|
]);
|
|
|
|
compile('<div ng-outlet></div>');
|
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.navigateByUrl('/user');
|
2015-08-20 16:19:34 -04:00
|
|
|
$rootScope.$digest();
|
|
|
|
|
|
|
|
expect(injectedScope).toBeDefined();
|
|
|
|
});
|
|
|
|
|
|
|
|
|
|
|
|
it('should run the deactivate hook of controllers', function () {
|
|
|
|
var spy = jasmine.createSpy('deactivate');
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
registerComponent('deactivateCmp', {
|
refactor(lifecycle): prefix lifecycle methods with "ng"
BREAKING CHANGE:
Previously, components that would implement lifecycle interfaces would include methods
like "onChanges" or "afterViewInit." Given that components were at risk of using such
names without realizing that Angular would call the methods at different points of
the component lifecycle. This change adds an "ng" prefix to all lifecycle hook methods,
far reducing the risk of an accidental name collision.
To fix, just rename these methods:
* onInit
* onDestroy
* doCheck
* onChanges
* afterContentInit
* afterContentChecked
* afterViewInit
* afterViewChecked
* _Router Hooks_
* onActivate
* onReuse
* onDeactivate
* canReuse
* canDeactivate
To:
* ngOnInit,
* ngOnDestroy,
* ngDoCheck,
* ngOnChanges,
* ngAfterContentInit,
* ngAfterContentChecked,
* ngAfterViewInit,
* ngAfterViewChecked
* _Router Hooks_
* routerOnActivate
* routerOnReuse
* routerOnDeactivate
* routerCanReuse
* routerCanDeactivate
The names of lifecycle interfaces and enums have not changed, though interfaces
have been updated to reflect the new method names.
Closes #5036
2015-11-16 20:04:36 -05:00
|
|
|
$routerOnDeactivate: spy
|
2015-08-20 16:19:34 -04:00
|
|
|
});
|
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.config([
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
{ path: '/a', component: 'deactivateCmp' },
|
|
|
|
{ path: '/b', component: 'oneCmp' }
|
2015-08-20 16:19:34 -04:00
|
|
|
]);
|
|
|
|
compile('<div ng-outlet></div>');
|
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.navigateByUrl('/a');
|
2015-08-20 16:19:34 -04:00
|
|
|
$rootScope.$digest();
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.navigateByUrl('/b');
|
2015-08-20 16:19:34 -04:00
|
|
|
$rootScope.$digest();
|
|
|
|
expect(spy).toHaveBeenCalled();
|
|
|
|
});
|
|
|
|
|
|
|
|
|
|
|
|
it('should pass instructions into the deactivate hook of controllers', function () {
|
|
|
|
var spy = jasmine.createSpy('deactivate');
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
registerComponent('deactivateCmp', {
|
refactor(lifecycle): prefix lifecycle methods with "ng"
BREAKING CHANGE:
Previously, components that would implement lifecycle interfaces would include methods
like "onChanges" or "afterViewInit." Given that components were at risk of using such
names without realizing that Angular would call the methods at different points of
the component lifecycle. This change adds an "ng" prefix to all lifecycle hook methods,
far reducing the risk of an accidental name collision.
To fix, just rename these methods:
* onInit
* onDestroy
* doCheck
* onChanges
* afterContentInit
* afterContentChecked
* afterViewInit
* afterViewChecked
* _Router Hooks_
* onActivate
* onReuse
* onDeactivate
* canReuse
* canDeactivate
To:
* ngOnInit,
* ngOnDestroy,
* ngDoCheck,
* ngOnChanges,
* ngAfterContentInit,
* ngAfterContentChecked,
* ngAfterViewInit,
* ngAfterViewChecked
* _Router Hooks_
* routerOnActivate
* routerOnReuse
* routerOnDeactivate
* routerCanReuse
* routerCanDeactivate
The names of lifecycle interfaces and enums have not changed, though interfaces
have been updated to reflect the new method names.
Closes #5036
2015-11-16 20:04:36 -05:00
|
|
|
$routerOnDeactivate: spy
|
2015-08-20 16:19:34 -04:00
|
|
|
});
|
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.config([
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
{ path: '/user/:name', component: 'deactivateCmp' },
|
|
|
|
{ path: '/post/:id', component: 'oneCmp' }
|
2015-08-20 16:19:34 -04:00
|
|
|
]);
|
|
|
|
compile('<div ng-outlet></div>');
|
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.navigateByUrl('/user/brian');
|
2015-08-20 16:19:34 -04:00
|
|
|
$rootScope.$digest();
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.navigateByUrl('/post/123');
|
2015-08-20 16:19:34 -04:00
|
|
|
$rootScope.$digest();
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
expect(spy).toHaveBeenCalledWith(instructionFor('oneCmp'),
|
|
|
|
instructionFor('deactivateCmp'));
|
2015-08-20 16:19:34 -04:00
|
|
|
});
|
|
|
|
|
|
|
|
|
|
|
|
it('should run the deactivate hook before the activate hook', function () {
|
|
|
|
var log = [];
|
|
|
|
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
registerComponent('activateCmp', {
|
refactor(lifecycle): prefix lifecycle methods with "ng"
BREAKING CHANGE:
Previously, components that would implement lifecycle interfaces would include methods
like "onChanges" or "afterViewInit." Given that components were at risk of using such
names without realizing that Angular would call the methods at different points of
the component lifecycle. This change adds an "ng" prefix to all lifecycle hook methods,
far reducing the risk of an accidental name collision.
To fix, just rename these methods:
* onInit
* onDestroy
* doCheck
* onChanges
* afterContentInit
* afterContentChecked
* afterViewInit
* afterViewChecked
* _Router Hooks_
* onActivate
* onReuse
* onDeactivate
* canReuse
* canDeactivate
To:
* ngOnInit,
* ngOnDestroy,
* ngDoCheck,
* ngOnChanges,
* ngAfterContentInit,
* ngAfterContentChecked,
* ngAfterViewInit,
* ngAfterViewChecked
* _Router Hooks_
* routerOnActivate
* routerOnReuse
* routerOnDeactivate
* routerCanReuse
* routerCanDeactivate
The names of lifecycle interfaces and enums have not changed, though interfaces
have been updated to reflect the new method names.
Closes #5036
2015-11-16 20:04:36 -05:00
|
|
|
$routerOnActivate: function () {
|
2015-08-20 16:19:34 -04:00
|
|
|
log.push('activate');
|
|
|
|
}
|
|
|
|
});
|
|
|
|
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
registerComponent('deactivateCmp', {
|
refactor(lifecycle): prefix lifecycle methods with "ng"
BREAKING CHANGE:
Previously, components that would implement lifecycle interfaces would include methods
like "onChanges" or "afterViewInit." Given that components were at risk of using such
names without realizing that Angular would call the methods at different points of
the component lifecycle. This change adds an "ng" prefix to all lifecycle hook methods,
far reducing the risk of an accidental name collision.
To fix, just rename these methods:
* onInit
* onDestroy
* doCheck
* onChanges
* afterContentInit
* afterContentChecked
* afterViewInit
* afterViewChecked
* _Router Hooks_
* onActivate
* onReuse
* onDeactivate
* canReuse
* canDeactivate
To:
* ngOnInit,
* ngOnDestroy,
* ngDoCheck,
* ngOnChanges,
* ngAfterContentInit,
* ngAfterContentChecked,
* ngAfterViewInit,
* ngAfterViewChecked
* _Router Hooks_
* routerOnActivate
* routerOnReuse
* routerOnDeactivate
* routerCanReuse
* routerCanDeactivate
The names of lifecycle interfaces and enums have not changed, though interfaces
have been updated to reflect the new method names.
Closes #5036
2015-11-16 20:04:36 -05:00
|
|
|
$routerOnDeactivate: function () {
|
2015-08-20 16:19:34 -04:00
|
|
|
log.push('deactivate');
|
|
|
|
}
|
|
|
|
});
|
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.config([
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
{ path: '/a', component: 'deactivateCmp' },
|
|
|
|
{ path: '/b', component: 'activateCmp' }
|
2015-08-20 16:19:34 -04:00
|
|
|
]);
|
|
|
|
compile('outer { <div ng-outlet></div> }');
|
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.navigateByUrl('/a');
|
2015-08-20 16:19:34 -04:00
|
|
|
$rootScope.$digest();
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.navigateByUrl('/b');
|
2015-08-20 16:19:34 -04:00
|
|
|
$rootScope.$digest();
|
|
|
|
|
|
|
|
expect(log).toEqual(['deactivate', 'activate']);
|
|
|
|
});
|
|
|
|
|
refactor(lifecycle): prefix lifecycle methods with "ng"
BREAKING CHANGE:
Previously, components that would implement lifecycle interfaces would include methods
like "onChanges" or "afterViewInit." Given that components were at risk of using such
names without realizing that Angular would call the methods at different points of
the component lifecycle. This change adds an "ng" prefix to all lifecycle hook methods,
far reducing the risk of an accidental name collision.
To fix, just rename these methods:
* onInit
* onDestroy
* doCheck
* onChanges
* afterContentInit
* afterContentChecked
* afterViewInit
* afterViewChecked
* _Router Hooks_
* onActivate
* onReuse
* onDeactivate
* canReuse
* canDeactivate
To:
* ngOnInit,
* ngOnDestroy,
* ngDoCheck,
* ngOnChanges,
* ngAfterContentInit,
* ngAfterContentChecked,
* ngAfterViewInit,
* ngAfterViewChecked
* _Router Hooks_
* routerOnActivate
* routerOnReuse
* routerOnDeactivate
* routerCanReuse
* routerCanDeactivate
The names of lifecycle interfaces and enums have not changed, though interfaces
have been updated to reflect the new method names.
Closes #5036
2015-11-16 20:04:36 -05:00
|
|
|
it('should reuse a component when the routerCanReuse hook returns true', function () {
|
2015-08-20 16:19:58 -04:00
|
|
|
var log = [];
|
|
|
|
var cmpInstanceCount = 0;
|
|
|
|
|
|
|
|
function ReuseCmp() {
|
|
|
|
cmpInstanceCount++;
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
registerComponent('reuseCmp', {
|
|
|
|
template: 'reuse {<ng-outlet></ng-outlet>}',
|
|
|
|
$routeConfig: [
|
|
|
|
{path: '/a', component: 'oneCmp'},
|
|
|
|
{path: '/b', component: 'twoCmp'}
|
|
|
|
],
|
|
|
|
controller: ReuseCmp,
|
refactor(lifecycle): prefix lifecycle methods with "ng"
BREAKING CHANGE:
Previously, components that would implement lifecycle interfaces would include methods
like "onChanges" or "afterViewInit." Given that components were at risk of using such
names without realizing that Angular would call the methods at different points of
the component lifecycle. This change adds an "ng" prefix to all lifecycle hook methods,
far reducing the risk of an accidental name collision.
To fix, just rename these methods:
* onInit
* onDestroy
* doCheck
* onChanges
* afterContentInit
* afterContentChecked
* afterViewInit
* afterViewChecked
* _Router Hooks_
* onActivate
* onReuse
* onDeactivate
* canReuse
* canDeactivate
To:
* ngOnInit,
* ngOnDestroy,
* ngDoCheck,
* ngOnChanges,
* ngAfterContentInit,
* ngAfterContentChecked,
* ngAfterViewInit,
* ngAfterViewChecked
* _Router Hooks_
* routerOnActivate
* routerOnReuse
* routerOnDeactivate
* routerCanReuse
* routerCanDeactivate
The names of lifecycle interfaces and enums have not changed, though interfaces
have been updated to reflect the new method names.
Closes #5036
2015-11-16 20:04:36 -05:00
|
|
|
$routerCanReuse: function () {
|
2015-08-20 16:19:58 -04:00
|
|
|
return true;
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
},
|
refactor(lifecycle): prefix lifecycle methods with "ng"
BREAKING CHANGE:
Previously, components that would implement lifecycle interfaces would include methods
like "onChanges" or "afterViewInit." Given that components were at risk of using such
names without realizing that Angular would call the methods at different points of
the component lifecycle. This change adds an "ng" prefix to all lifecycle hook methods,
far reducing the risk of an accidental name collision.
To fix, just rename these methods:
* onInit
* onDestroy
* doCheck
* onChanges
* afterContentInit
* afterContentChecked
* afterViewInit
* afterViewChecked
* _Router Hooks_
* onActivate
* onReuse
* onDeactivate
* canReuse
* canDeactivate
To:
* ngOnInit,
* ngOnDestroy,
* ngDoCheck,
* ngOnChanges,
* ngAfterContentInit,
* ngAfterContentChecked,
* ngAfterViewInit,
* ngAfterViewChecked
* _Router Hooks_
* routerOnActivate
* routerOnReuse
* routerOnDeactivate
* routerCanReuse
* routerCanDeactivate
The names of lifecycle interfaces and enums have not changed, though interfaces
have been updated to reflect the new method names.
Closes #5036
2015-11-16 20:04:36 -05:00
|
|
|
$routerOnReuse: function (next, prev) {
|
2015-08-20 16:19:58 -04:00
|
|
|
log.push('reuse: ' + prev.urlPath + ' -> ' + next.urlPath);
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
}
|
|
|
|
});
|
2015-08-20 16:19:58 -04:00
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.config([
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
{ path: '/on-reuse/:number/...', component: 'reuseCmp' },
|
2015-10-25 05:30:27 -04:00
|
|
|
{ path: '/two', component: 'twoCmp', name: 'Two'}
|
2015-08-20 16:19:58 -04:00
|
|
|
]);
|
|
|
|
compile('outer { <div ng-outlet></div> }');
|
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.navigateByUrl('/on-reuse/1/a');
|
2015-08-20 16:19:58 -04:00
|
|
|
$rootScope.$digest();
|
|
|
|
expect(log).toEqual([]);
|
|
|
|
expect(cmpInstanceCount).toBe(1);
|
|
|
|
expect(elt.text()).toBe('outer { reuse {one} }');
|
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.navigateByUrl('/on-reuse/2/b');
|
2015-08-20 16:19:58 -04:00
|
|
|
$rootScope.$digest();
|
|
|
|
expect(log).toEqual(['reuse: on-reuse/1 -> on-reuse/2']);
|
|
|
|
expect(cmpInstanceCount).toBe(1);
|
|
|
|
expect(elt.text()).toBe('outer { reuse {two} }');
|
|
|
|
});
|
|
|
|
|
|
|
|
|
refactor(lifecycle): prefix lifecycle methods with "ng"
BREAKING CHANGE:
Previously, components that would implement lifecycle interfaces would include methods
like "onChanges" or "afterViewInit." Given that components were at risk of using such
names without realizing that Angular would call the methods at different points of
the component lifecycle. This change adds an "ng" prefix to all lifecycle hook methods,
far reducing the risk of an accidental name collision.
To fix, just rename these methods:
* onInit
* onDestroy
* doCheck
* onChanges
* afterContentInit
* afterContentChecked
* afterViewInit
* afterViewChecked
* _Router Hooks_
* onActivate
* onReuse
* onDeactivate
* canReuse
* canDeactivate
To:
* ngOnInit,
* ngOnDestroy,
* ngDoCheck,
* ngOnChanges,
* ngAfterContentInit,
* ngAfterContentChecked,
* ngAfterViewInit,
* ngAfterViewChecked
* _Router Hooks_
* routerOnActivate
* routerOnReuse
* routerOnDeactivate
* routerCanReuse
* routerCanDeactivate
The names of lifecycle interfaces and enums have not changed, though interfaces
have been updated to reflect the new method names.
Closes #5036
2015-11-16 20:04:36 -05:00
|
|
|
it('should not reuse a component when the routerCanReuse hook returns false', function () {
|
2015-08-20 16:19:58 -04:00
|
|
|
var log = [];
|
|
|
|
var cmpInstanceCount = 0;
|
|
|
|
|
|
|
|
function NeverReuseCmp() {
|
|
|
|
cmpInstanceCount++;
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
}
|
|
|
|
registerComponent('reuseCmp', {
|
|
|
|
template: 'reuse {<ng-outlet></ng-outlet>}',
|
|
|
|
$routeConfig: [
|
|
|
|
{path: '/a', component: 'oneCmp'},
|
|
|
|
{path: '/b', component: 'twoCmp'}
|
|
|
|
],
|
|
|
|
controller: NeverReuseCmp,
|
refactor(lifecycle): prefix lifecycle methods with "ng"
BREAKING CHANGE:
Previously, components that would implement lifecycle interfaces would include methods
like "onChanges" or "afterViewInit." Given that components were at risk of using such
names without realizing that Angular would call the methods at different points of
the component lifecycle. This change adds an "ng" prefix to all lifecycle hook methods,
far reducing the risk of an accidental name collision.
To fix, just rename these methods:
* onInit
* onDestroy
* doCheck
* onChanges
* afterContentInit
* afterContentChecked
* afterViewInit
* afterViewChecked
* _Router Hooks_
* onActivate
* onReuse
* onDeactivate
* canReuse
* canDeactivate
To:
* ngOnInit,
* ngOnDestroy,
* ngDoCheck,
* ngOnChanges,
* ngAfterContentInit,
* ngAfterContentChecked,
* ngAfterViewInit,
* ngAfterViewChecked
* _Router Hooks_
* routerOnActivate
* routerOnReuse
* routerOnDeactivate
* routerCanReuse
* routerCanDeactivate
The names of lifecycle interfaces and enums have not changed, though interfaces
have been updated to reflect the new method names.
Closes #5036
2015-11-16 20:04:36 -05:00
|
|
|
$routerCanReuse: function () {
|
2015-08-20 16:19:58 -04:00
|
|
|
return false;
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
},
|
refactor(lifecycle): prefix lifecycle methods with "ng"
BREAKING CHANGE:
Previously, components that would implement lifecycle interfaces would include methods
like "onChanges" or "afterViewInit." Given that components were at risk of using such
names without realizing that Angular would call the methods at different points of
the component lifecycle. This change adds an "ng" prefix to all lifecycle hook methods,
far reducing the risk of an accidental name collision.
To fix, just rename these methods:
* onInit
* onDestroy
* doCheck
* onChanges
* afterContentInit
* afterContentChecked
* afterViewInit
* afterViewChecked
* _Router Hooks_
* onActivate
* onReuse
* onDeactivate
* canReuse
* canDeactivate
To:
* ngOnInit,
* ngOnDestroy,
* ngDoCheck,
* ngOnChanges,
* ngAfterContentInit,
* ngAfterContentChecked,
* ngAfterViewInit,
* ngAfterViewChecked
* _Router Hooks_
* routerOnActivate
* routerOnReuse
* routerOnDeactivate
* routerCanReuse
* routerCanDeactivate
The names of lifecycle interfaces and enums have not changed, though interfaces
have been updated to reflect the new method names.
Closes #5036
2015-11-16 20:04:36 -05:00
|
|
|
$routerOnReuse: function (next, prev) {
|
2015-08-20 16:19:58 -04:00
|
|
|
log.push('reuse: ' + prev.urlPath + ' -> ' + next.urlPath);
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
}
|
|
|
|
});
|
2015-08-20 16:19:58 -04:00
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.config([
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
{ path: '/never-reuse/:number/...', component: 'reuseCmp' },
|
2015-10-25 05:30:27 -04:00
|
|
|
{ path: '/two', component: 'twoCmp', name: 'Two'}
|
2015-08-20 16:19:58 -04:00
|
|
|
]);
|
|
|
|
compile('outer { <div ng-outlet></div> }');
|
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.navigateByUrl('/never-reuse/1/a');
|
2015-08-20 16:19:58 -04:00
|
|
|
$rootScope.$digest();
|
|
|
|
expect(log).toEqual([]);
|
|
|
|
expect(cmpInstanceCount).toBe(1);
|
|
|
|
expect(elt.text()).toBe('outer { reuse {one} }');
|
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.navigateByUrl('/never-reuse/2/b');
|
2015-08-20 16:19:58 -04:00
|
|
|
$rootScope.$digest();
|
|
|
|
expect(log).toEqual([]);
|
|
|
|
expect(cmpInstanceCount).toBe(2);
|
|
|
|
expect(elt.text()).toBe('outer { reuse {two} }');
|
|
|
|
});
|
|
|
|
|
|
|
|
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
// TODO: need to solve getting ahold of canActivate hook
|
2015-08-20 16:19:34 -04:00
|
|
|
it('should not activate a component when canActivate returns false', function () {
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
var canActivateSpy = jasmine.createSpy('canActivate').and.returnValue(false);
|
2015-08-20 16:19:34 -04:00
|
|
|
var spy = jasmine.createSpy('activate');
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
registerComponent('activateCmp', {
|
|
|
|
$canActivate: canActivateSpy,
|
refactor(lifecycle): prefix lifecycle methods with "ng"
BREAKING CHANGE:
Previously, components that would implement lifecycle interfaces would include methods
like "onChanges" or "afterViewInit." Given that components were at risk of using such
names without realizing that Angular would call the methods at different points of
the component lifecycle. This change adds an "ng" prefix to all lifecycle hook methods,
far reducing the risk of an accidental name collision.
To fix, just rename these methods:
* onInit
* onDestroy
* doCheck
* onChanges
* afterContentInit
* afterContentChecked
* afterViewInit
* afterViewChecked
* _Router Hooks_
* onActivate
* onReuse
* onDeactivate
* canReuse
* canDeactivate
To:
* ngOnInit,
* ngOnDestroy,
* ngDoCheck,
* ngOnChanges,
* ngAfterContentInit,
* ngAfterContentChecked,
* ngAfterViewInit,
* ngAfterViewChecked
* _Router Hooks_
* routerOnActivate
* routerOnReuse
* routerOnDeactivate
* routerCanReuse
* routerCanDeactivate
The names of lifecycle interfaces and enums have not changed, though interfaces
have been updated to reflect the new method names.
Closes #5036
2015-11-16 20:04:36 -05:00
|
|
|
$routerOnActivate: spy
|
2015-08-20 16:19:34 -04:00
|
|
|
});
|
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.config([
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
{ path: '/a', component: 'activateCmp' }
|
2015-08-20 16:19:34 -04:00
|
|
|
]);
|
|
|
|
compile('outer { <div ng-outlet></div> }');
|
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.navigateByUrl('/a');
|
2015-08-20 16:19:34 -04:00
|
|
|
$rootScope.$digest();
|
|
|
|
|
|
|
|
expect(spy).not.toHaveBeenCalled();
|
|
|
|
expect(elt.text()).toBe('outer { }');
|
|
|
|
});
|
|
|
|
|
|
|
|
|
|
|
|
it('should activate a component when canActivate returns true', function () {
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
var activateSpy = jasmine.createSpy('activate');
|
|
|
|
var canActivateSpy = jasmine.createSpy('canActivate').and.returnValue(true);
|
|
|
|
registerComponent('activateCmp', {
|
|
|
|
template: 'hi',
|
|
|
|
$canActivate: canActivateSpy,
|
refactor(lifecycle): prefix lifecycle methods with "ng"
BREAKING CHANGE:
Previously, components that would implement lifecycle interfaces would include methods
like "onChanges" or "afterViewInit." Given that components were at risk of using such
names without realizing that Angular would call the methods at different points of
the component lifecycle. This change adds an "ng" prefix to all lifecycle hook methods,
far reducing the risk of an accidental name collision.
To fix, just rename these methods:
* onInit
* onDestroy
* doCheck
* onChanges
* afterContentInit
* afterContentChecked
* afterViewInit
* afterViewChecked
* _Router Hooks_
* onActivate
* onReuse
* onDeactivate
* canReuse
* canDeactivate
To:
* ngOnInit,
* ngOnDestroy,
* ngDoCheck,
* ngOnChanges,
* ngAfterContentInit,
* ngAfterContentChecked,
* ngAfterViewInit,
* ngAfterViewChecked
* _Router Hooks_
* routerOnActivate
* routerOnReuse
* routerOnDeactivate
* routerCanReuse
* routerCanDeactivate
The names of lifecycle interfaces and enums have not changed, though interfaces
have been updated to reflect the new method names.
Closes #5036
2015-11-16 20:04:36 -05:00
|
|
|
$routerOnActivate: activateSpy
|
2015-08-20 16:19:34 -04:00
|
|
|
});
|
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.config([
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
{ path: '/a', component: 'activateCmp' }
|
2015-08-20 16:19:34 -04:00
|
|
|
]);
|
|
|
|
compile('<div ng-outlet></div>');
|
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.navigateByUrl('/a');
|
2015-08-20 16:19:34 -04:00
|
|
|
$rootScope.$digest();
|
|
|
|
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
expect(canActivateSpy).toHaveBeenCalled();
|
|
|
|
expect(activateSpy).toHaveBeenCalled();
|
2015-08-20 16:19:34 -04:00
|
|
|
expect(elt.text()).toBe('hi');
|
|
|
|
});
|
|
|
|
|
|
|
|
|
|
|
|
it('should activate a component when canActivate returns a resolved promise', inject(function ($q) {
|
|
|
|
var spy = jasmine.createSpy('activate');
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
registerComponent('activateCmp', {
|
|
|
|
template: 'hi',
|
|
|
|
$canActivate: function () {
|
2015-08-20 16:19:34 -04:00
|
|
|
return $q.when(true);
|
|
|
|
},
|
refactor(lifecycle): prefix lifecycle methods with "ng"
BREAKING CHANGE:
Previously, components that would implement lifecycle interfaces would include methods
like "onChanges" or "afterViewInit." Given that components were at risk of using such
names without realizing that Angular would call the methods at different points of
the component lifecycle. This change adds an "ng" prefix to all lifecycle hook methods,
far reducing the risk of an accidental name collision.
To fix, just rename these methods:
* onInit
* onDestroy
* doCheck
* onChanges
* afterContentInit
* afterContentChecked
* afterViewInit
* afterViewChecked
* _Router Hooks_
* onActivate
* onReuse
* onDeactivate
* canReuse
* canDeactivate
To:
* ngOnInit,
* ngOnDestroy,
* ngDoCheck,
* ngOnChanges,
* ngAfterContentInit,
* ngAfterContentChecked,
* ngAfterViewInit,
* ngAfterViewChecked
* _Router Hooks_
* routerOnActivate
* routerOnReuse
* routerOnDeactivate
* routerCanReuse
* routerCanDeactivate
The names of lifecycle interfaces and enums have not changed, though interfaces
have been updated to reflect the new method names.
Closes #5036
2015-11-16 20:04:36 -05:00
|
|
|
$routerOnActivate: spy
|
2015-08-20 16:19:34 -04:00
|
|
|
});
|
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.config([
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
{ path: '/a', component: 'activateCmp' }
|
2015-08-20 16:19:34 -04:00
|
|
|
]);
|
|
|
|
compile('<div ng-outlet></div>');
|
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.navigateByUrl('/a');
|
2015-08-20 16:19:34 -04:00
|
|
|
$rootScope.$digest();
|
|
|
|
|
|
|
|
expect(spy).toHaveBeenCalled();
|
|
|
|
expect(elt.text()).toBe('hi');
|
|
|
|
}));
|
|
|
|
|
|
|
|
|
|
|
|
it('should inject into the canActivate hook of controllers', inject(function ($http) {
|
|
|
|
var spy = jasmine.createSpy('canActivate').and.returnValue(true);
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
registerComponent('activateCmp', {
|
|
|
|
$canActivate: spy
|
2015-08-20 16:19:34 -04:00
|
|
|
});
|
|
|
|
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
spy.$inject = ['$nextInstruction', '$http'];
|
2015-08-20 16:19:34 -04:00
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.config([
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
{ path: '/user/:name', component: 'activateCmp' }
|
2015-08-20 16:19:34 -04:00
|
|
|
]);
|
|
|
|
compile('<div ng-outlet></div>');
|
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.navigateByUrl('/user/brian');
|
2015-08-20 16:19:34 -04:00
|
|
|
$rootScope.$digest();
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
|
|
|
|
expect(spy).toHaveBeenCalled();
|
|
|
|
var args = spy.calls.mostRecent().args;
|
2016-02-09 14:12:41 -05:00
|
|
|
expect(args[0].params).toEqual(jasmine.objectContaining({name: 'brian'}));
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
expect(args[1]).toBe($http);
|
2015-08-20 16:19:34 -04:00
|
|
|
}));
|
|
|
|
|
|
|
|
|
refactor(lifecycle): prefix lifecycle methods with "ng"
BREAKING CHANGE:
Previously, components that would implement lifecycle interfaces would include methods
like "onChanges" or "afterViewInit." Given that components were at risk of using such
names without realizing that Angular would call the methods at different points of
the component lifecycle. This change adds an "ng" prefix to all lifecycle hook methods,
far reducing the risk of an accidental name collision.
To fix, just rename these methods:
* onInit
* onDestroy
* doCheck
* onChanges
* afterContentInit
* afterContentChecked
* afterViewInit
* afterViewChecked
* _Router Hooks_
* onActivate
* onReuse
* onDeactivate
* canReuse
* canDeactivate
To:
* ngOnInit,
* ngOnDestroy,
* ngDoCheck,
* ngOnChanges,
* ngAfterContentInit,
* ngAfterContentChecked,
* ngAfterViewInit,
* ngAfterViewChecked
* _Router Hooks_
* routerOnActivate
* routerOnReuse
* routerOnDeactivate
* routerCanReuse
* routerCanDeactivate
The names of lifecycle interfaces and enums have not changed, though interfaces
have been updated to reflect the new method names.
Closes #5036
2015-11-16 20:04:36 -05:00
|
|
|
it('should not navigate when routerCanDeactivate returns false', function () {
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
registerComponent('activateCmp', {
|
|
|
|
template: 'hi',
|
refactor(lifecycle): prefix lifecycle methods with "ng"
BREAKING CHANGE:
Previously, components that would implement lifecycle interfaces would include methods
like "onChanges" or "afterViewInit." Given that components were at risk of using such
names without realizing that Angular would call the methods at different points of
the component lifecycle. This change adds an "ng" prefix to all lifecycle hook methods,
far reducing the risk of an accidental name collision.
To fix, just rename these methods:
* onInit
* onDestroy
* doCheck
* onChanges
* afterContentInit
* afterContentChecked
* afterViewInit
* afterViewChecked
* _Router Hooks_
* onActivate
* onReuse
* onDeactivate
* canReuse
* canDeactivate
To:
* ngOnInit,
* ngOnDestroy,
* ngDoCheck,
* ngOnChanges,
* ngAfterContentInit,
* ngAfterContentChecked,
* ngAfterViewInit,
* ngAfterViewChecked
* _Router Hooks_
* routerOnActivate
* routerOnReuse
* routerOnDeactivate
* routerCanReuse
* routerCanDeactivate
The names of lifecycle interfaces and enums have not changed, though interfaces
have been updated to reflect the new method names.
Closes #5036
2015-11-16 20:04:36 -05:00
|
|
|
$routerCanDeactivate: function () {
|
2015-08-20 16:19:34 -04:00
|
|
|
return false;
|
|
|
|
}
|
|
|
|
});
|
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.config([
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
{ path: '/a', component: 'activateCmp' },
|
|
|
|
{ path: '/b', component: 'oneCmp' }
|
2015-08-20 16:19:34 -04:00
|
|
|
]);
|
|
|
|
compile('outer { <div ng-outlet></div> }');
|
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.navigateByUrl('/a');
|
2015-08-20 16:19:34 -04:00
|
|
|
$rootScope.$digest();
|
|
|
|
expect(elt.text()).toBe('outer { hi }');
|
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.navigateByUrl('/b');
|
2015-08-20 16:19:34 -04:00
|
|
|
$rootScope.$digest();
|
|
|
|
expect(elt.text()).toBe('outer { hi }');
|
|
|
|
});
|
|
|
|
|
|
|
|
|
refactor(lifecycle): prefix lifecycle methods with "ng"
BREAKING CHANGE:
Previously, components that would implement lifecycle interfaces would include methods
like "onChanges" or "afterViewInit." Given that components were at risk of using such
names without realizing that Angular would call the methods at different points of
the component lifecycle. This change adds an "ng" prefix to all lifecycle hook methods,
far reducing the risk of an accidental name collision.
To fix, just rename these methods:
* onInit
* onDestroy
* doCheck
* onChanges
* afterContentInit
* afterContentChecked
* afterViewInit
* afterViewChecked
* _Router Hooks_
* onActivate
* onReuse
* onDeactivate
* canReuse
* canDeactivate
To:
* ngOnInit,
* ngOnDestroy,
* ngDoCheck,
* ngOnChanges,
* ngAfterContentInit,
* ngAfterContentChecked,
* ngAfterViewInit,
* ngAfterViewChecked
* _Router Hooks_
* routerOnActivate
* routerOnReuse
* routerOnDeactivate
* routerCanReuse
* routerCanDeactivate
The names of lifecycle interfaces and enums have not changed, though interfaces
have been updated to reflect the new method names.
Closes #5036
2015-11-16 20:04:36 -05:00
|
|
|
it('should navigate when routerCanDeactivate returns true', function () {
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
registerComponent('activateCmp', {
|
|
|
|
template: 'hi',
|
refactor(lifecycle): prefix lifecycle methods with "ng"
BREAKING CHANGE:
Previously, components that would implement lifecycle interfaces would include methods
like "onChanges" or "afterViewInit." Given that components were at risk of using such
names without realizing that Angular would call the methods at different points of
the component lifecycle. This change adds an "ng" prefix to all lifecycle hook methods,
far reducing the risk of an accidental name collision.
To fix, just rename these methods:
* onInit
* onDestroy
* doCheck
* onChanges
* afterContentInit
* afterContentChecked
* afterViewInit
* afterViewChecked
* _Router Hooks_
* onActivate
* onReuse
* onDeactivate
* canReuse
* canDeactivate
To:
* ngOnInit,
* ngOnDestroy,
* ngDoCheck,
* ngOnChanges,
* ngAfterContentInit,
* ngAfterContentChecked,
* ngAfterViewInit,
* ngAfterViewChecked
* _Router Hooks_
* routerOnActivate
* routerOnReuse
* routerOnDeactivate
* routerCanReuse
* routerCanDeactivate
The names of lifecycle interfaces and enums have not changed, though interfaces
have been updated to reflect the new method names.
Closes #5036
2015-11-16 20:04:36 -05:00
|
|
|
$routerCanDeactivate: function () {
|
2015-08-20 16:19:34 -04:00
|
|
|
return true;
|
|
|
|
}
|
|
|
|
});
|
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.config([
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
{ path: '/a', component: 'activateCmp' },
|
|
|
|
{ path: '/b', component: 'oneCmp' }
|
2015-08-20 16:19:34 -04:00
|
|
|
]);
|
|
|
|
compile('outer { <div ng-outlet></div> }');
|
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.navigateByUrl('/a');
|
2015-08-20 16:19:34 -04:00
|
|
|
$rootScope.$digest();
|
|
|
|
expect(elt.text()).toBe('outer { hi }');
|
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.navigateByUrl('/b');
|
2015-08-20 16:19:34 -04:00
|
|
|
$rootScope.$digest();
|
|
|
|
expect(elt.text()).toBe('outer { one }');
|
|
|
|
});
|
|
|
|
|
|
|
|
|
|
|
|
it('should activate a component when canActivate returns true', function () {
|
|
|
|
var spy = jasmine.createSpy('activate');
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
registerComponent('activateCmp', {
|
|
|
|
template: 'hi',
|
|
|
|
$canActivate: function () {
|
2015-08-20 16:19:34 -04:00
|
|
|
return true;
|
|
|
|
},
|
refactor(lifecycle): prefix lifecycle methods with "ng"
BREAKING CHANGE:
Previously, components that would implement lifecycle interfaces would include methods
like "onChanges" or "afterViewInit." Given that components were at risk of using such
names without realizing that Angular would call the methods at different points of
the component lifecycle. This change adds an "ng" prefix to all lifecycle hook methods,
far reducing the risk of an accidental name collision.
To fix, just rename these methods:
* onInit
* onDestroy
* doCheck
* onChanges
* afterContentInit
* afterContentChecked
* afterViewInit
* afterViewChecked
* _Router Hooks_
* onActivate
* onReuse
* onDeactivate
* canReuse
* canDeactivate
To:
* ngOnInit,
* ngOnDestroy,
* ngDoCheck,
* ngOnChanges,
* ngAfterContentInit,
* ngAfterContentChecked,
* ngAfterViewInit,
* ngAfterViewChecked
* _Router Hooks_
* routerOnActivate
* routerOnReuse
* routerOnDeactivate
* routerCanReuse
* routerCanDeactivate
The names of lifecycle interfaces and enums have not changed, though interfaces
have been updated to reflect the new method names.
Closes #5036
2015-11-16 20:04:36 -05:00
|
|
|
$routerOnActivate: spy
|
2015-08-20 16:19:34 -04:00
|
|
|
});
|
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.config([
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
{ path: '/a', component: 'activateCmp' }
|
2015-08-20 16:19:34 -04:00
|
|
|
]);
|
|
|
|
compile('<div ng-outlet></div>');
|
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.navigateByUrl('/a');
|
2015-08-20 16:19:34 -04:00
|
|
|
$rootScope.$digest();
|
|
|
|
|
|
|
|
expect(spy).toHaveBeenCalled();
|
|
|
|
expect(elt.text()).toBe('hi');
|
|
|
|
});
|
|
|
|
|
|
|
|
|
refactor(lifecycle): prefix lifecycle methods with "ng"
BREAKING CHANGE:
Previously, components that would implement lifecycle interfaces would include methods
like "onChanges" or "afterViewInit." Given that components were at risk of using such
names without realizing that Angular would call the methods at different points of
the component lifecycle. This change adds an "ng" prefix to all lifecycle hook methods,
far reducing the risk of an accidental name collision.
To fix, just rename these methods:
* onInit
* onDestroy
* doCheck
* onChanges
* afterContentInit
* afterContentChecked
* afterViewInit
* afterViewChecked
* _Router Hooks_
* onActivate
* onReuse
* onDeactivate
* canReuse
* canDeactivate
To:
* ngOnInit,
* ngOnDestroy,
* ngDoCheck,
* ngOnChanges,
* ngAfterContentInit,
* ngAfterContentChecked,
* ngAfterViewInit,
* ngAfterViewChecked
* _Router Hooks_
* routerOnActivate
* routerOnReuse
* routerOnDeactivate
* routerCanReuse
* routerCanDeactivate
The names of lifecycle interfaces and enums have not changed, though interfaces
have been updated to reflect the new method names.
Closes #5036
2015-11-16 20:04:36 -05:00
|
|
|
it('should pass instructions into the routerCanDeactivate hook of controllers', function () {
|
|
|
|
var spy = jasmine.createSpy('routerCanDeactivate').and.returnValue(true);
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
registerComponent('deactivateCmp', {
|
refactor(lifecycle): prefix lifecycle methods with "ng"
BREAKING CHANGE:
Previously, components that would implement lifecycle interfaces would include methods
like "onChanges" or "afterViewInit." Given that components were at risk of using such
names without realizing that Angular would call the methods at different points of
the component lifecycle. This change adds an "ng" prefix to all lifecycle hook methods,
far reducing the risk of an accidental name collision.
To fix, just rename these methods:
* onInit
* onDestroy
* doCheck
* onChanges
* afterContentInit
* afterContentChecked
* afterViewInit
* afterViewChecked
* _Router Hooks_
* onActivate
* onReuse
* onDeactivate
* canReuse
* canDeactivate
To:
* ngOnInit,
* ngOnDestroy,
* ngDoCheck,
* ngOnChanges,
* ngAfterContentInit,
* ngAfterContentChecked,
* ngAfterViewInit,
* ngAfterViewChecked
* _Router Hooks_
* routerOnActivate
* routerOnReuse
* routerOnDeactivate
* routerCanReuse
* routerCanDeactivate
The names of lifecycle interfaces and enums have not changed, though interfaces
have been updated to reflect the new method names.
Closes #5036
2015-11-16 20:04:36 -05:00
|
|
|
$routerCanDeactivate: spy
|
2015-08-20 16:19:34 -04:00
|
|
|
});
|
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.config([
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
{ path: '/user/:name', component: 'deactivateCmp' },
|
|
|
|
{ path: '/post/:id', component: 'oneCmp' }
|
2015-08-20 16:19:34 -04:00
|
|
|
]);
|
|
|
|
compile('<div ng-outlet></div>');
|
|
|
|
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.navigateByUrl('/user/brian');
|
2015-08-20 16:19:34 -04:00
|
|
|
$rootScope.$digest();
|
2016-02-17 02:47:49 -05:00
|
|
|
$rootRouter.navigateByUrl('/post/123');
|
2015-08-20 16:19:34 -04:00
|
|
|
$rootScope.$digest();
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
expect(spy).toHaveBeenCalledWith(instructionFor('oneCmp'),
|
|
|
|
instructionFor('deactivateCmp'));
|
2015-08-20 16:19:34 -04:00
|
|
|
});
|
|
|
|
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
|
|
|
|
function registerComponent(name, options) {
|
|
|
|
var controller = options.controller || function () {};
|
|
|
|
|
refactor(lifecycle): prefix lifecycle methods with "ng"
BREAKING CHANGE:
Previously, components that would implement lifecycle interfaces would include methods
like "onChanges" or "afterViewInit." Given that components were at risk of using such
names without realizing that Angular would call the methods at different points of
the component lifecycle. This change adds an "ng" prefix to all lifecycle hook methods,
far reducing the risk of an accidental name collision.
To fix, just rename these methods:
* onInit
* onDestroy
* doCheck
* onChanges
* afterContentInit
* afterContentChecked
* afterViewInit
* afterViewChecked
* _Router Hooks_
* onActivate
* onReuse
* onDeactivate
* canReuse
* canDeactivate
To:
* ngOnInit,
* ngOnDestroy,
* ngDoCheck,
* ngOnChanges,
* ngAfterContentInit,
* ngAfterContentChecked,
* ngAfterViewInit,
* ngAfterViewChecked
* _Router Hooks_
* routerOnActivate
* routerOnReuse
* routerOnDeactivate
* routerCanReuse
* routerCanDeactivate
The names of lifecycle interfaces and enums have not changed, though interfaces
have been updated to reflect the new method names.
Closes #5036
2015-11-16 20:04:36 -05:00
|
|
|
['$routerOnActivate', '$routerOnDeactivate', '$routerOnReuse', '$routerCanReuse', '$routerCanDeactivate'].forEach(function (hookName) {
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
if (options[hookName]) {
|
|
|
|
controller.prototype[hookName] = options[hookName];
|
2015-08-20 16:19:34 -04:00
|
|
|
}
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
});
|
|
|
|
|
|
|
|
function factory() {
|
|
|
|
return {
|
|
|
|
template: options.template || '',
|
|
|
|
controllerAs: name,
|
|
|
|
controller: controller
|
|
|
|
};
|
2015-08-20 16:19:34 -04:00
|
|
|
}
|
|
|
|
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
if (options.$canActivate) {
|
|
|
|
factory.$canActivate = options.$canActivate;
|
|
|
|
}
|
|
|
|
if (options.$routeConfig) {
|
|
|
|
factory.$routeConfig = options.$routeConfig;
|
|
|
|
}
|
2015-08-20 16:19:34 -04:00
|
|
|
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
$compileProvider.directive(name, factory);
|
2015-08-20 16:19:34 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
function compile(template) {
|
|
|
|
elt = $compile('<div>' + template + '</div>')($rootScope);
|
|
|
|
$rootScope.$digest();
|
|
|
|
return elt;
|
|
|
|
}
|
refactor(angular_1_router): use directives for route targets
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
2015-09-18 18:53:50 -04:00
|
|
|
|
|
|
|
function instructionFor(componentType) {
|
|
|
|
return jasmine.objectContaining({componentType: componentType});
|
|
|
|
}
|
2015-08-20 16:19:34 -04:00
|
|
|
});
|