The logic to create additional files needed for Bazel are currently
hosted in `ng new`. Such files include the main.*.ts files needed
for AOT and a different angular.json to use Bazel builder, among others.
This commit refactors the logic into `ng add` so that it can be used to
perform the same modifications in an existing project. Users could do so
by running `ng add @angular/bazel`.
With this change, `ng new` effectively becomes an orchestrator that runs
the original `ng new` followed by `ng add @angular/bazel`.
PR Close#28436
Currently we depend on the "rules_webtesting" version that is
installed by "rules_typescript//:package.bzl". This version of
the webtesting rules comes with a very old version of Chromium
and the `chromedriver` that does not support capturing console
errors properly (with stack traces). Since we have a few e2e
tests that depend on console output (e.g. playground/src/source-map),
we need to make sure that these tests can pass upon Bazel
migration.
PR Close#28490
This commit fixes a bug in the Bazel builder in which the path to Bazel
executable is constructed using the project path. For non-default
project, the node_modules directory is actually one level above the
project path.
This PR fixes the bug by resolving node_modules with require.resolve().
It requires @bazel/bazel v0.22.1 because previous versions do not have
index.js or main field in package.json and would cause node module
resolution to fail.
This has been tested with both bazel and ibazel.
PR Close#28478
Builder for `@angular/bazel` schematics should not expect bazel/ibazel
to be on the PATH. It should instead invoke the local executable
installed by yarn/npm.
PR Close#28303
Users should be able to add Bazel workspace to an existing project.
The current approach assumes that the schematics is working on the same
tree as that of ng-new, which includes the top-level directory. Instead,
the schematic should work on the tree rooted at `appRoot` to enable
Bazel files to be added to existing project.
This change uses the newly implemented ScopedTree
a0ac4b0e3d
to achieve this.
NOTE: The version of `@angular-devkit/schematics` that is installed is
used to run the `@angular/bazel` schematic. Even if a different version
is used in the schematic itself, it has no effect.
Therefore, the *latest* Angular CLI should be used to generate the
files. As of this commit, the latest version is @angular/cli@7.3.0-rc.0
PR Close#28349
yarn install was disabled in ng-new for Bazel schematics because
Bazel manages its own node_modules dependencies and therefore
there is no need to install dependencies twice.
However, the first yarn install is needed for `ng` commands to work,
most notably `ng build`.
This commit restores the original behavior.
PR Close#28381
The current build workflow depends on cross workspace dependency by
installing angular-cli as a Bazel repository. This is not ideal because
it introduces separate node_module directories other than the one
installed by Angular through the yarn_install rule (ngdeps).
This commit removes angular-cli from the Bazel workspace and installs
rollup and @angular-devkit/build-optimizer locally.
PR Close#28215
This commit fixes a bug whereby a Bazel project created by the
schematics would not compiled if project contains routing module.
It is missing a dependency on the router package.
PR Close#28141
* This is a follow-up to cd0451305a which fixes that "ngc-wrapped" from the "npm" workspace is always used if "angular" is fetched as an external dependency.
PR Close#28137
With the update to TypeScript 3.2.x, a big issue seems to have appeared for downstream Bazel users. If the downstream user still uses a lower TypeScript version, normal Bazel targets using the `ng_module` rule are still compiled with the correct/old TypeScript version (assuming they set the `node_modules` attribute properly).
But, if they build the previous Bazel targets by specifying them within a `ng_package` rule, the TypeScript version from the Angular `workspace` is being used for the replayed ESM5 compilation. This is because we resolve the replay compiler to `ngc_wrapped` or `tsc_wrapped` Bazel executables which are defined as part of the `angular` workspace. This means that the compilers are different if the downstream user uses `ngc-wrapped` from the `@npm` repository because the replayed compilation would use the compiler with `@ngdeps//typescript`.
In order to fix this, we should just use the compiler that is defined in the `@angular//BUILD.bazel` file. This target by defaults to the "@npm" workspace which is working for downstream users. This is similar to how it is handled for `tsc-wrapped`. `tsc-wrapped` works as expected for downstream users.
**Note**: This is not the ideal solution because ideally we would
completely respect the `compiler` option from the base `ng_module`, but
this is not possible in a hermetic way, unless we somehow accept the
`compiler` as an attribute that builds all transitive deps. This is
something we should explore in the future. For now, we just fix this in
a reasonable way that is also used for `tsc_wrapped` from the TypeScript
rules.
PR Close#28053
index.html needs to have the zone.js and the project bundle injected
using script tags. This used to be done explicitly by specifying a
new index.html but with `web_package` rule introduced in rules_nodejs,
it is now possible to perform the injection dynamically.
PR Close#27995
Incremental rebuilds is a fundamental part of the development
workflow. `@bazel/ibazel` should be added to the dev dependencies
of a Bazel project.
PR Close#28090
There are various e2e tests with the `_spec.ts` suffix in the Angular project. Currently the protractor Bazel rule does not pick up these files and just ignores them. Since underscore is commonly used, we should support this.
Needed for the conversion fo the `examples` to Bazel.
PR Close#28022
Project created by @angular/cli depends on Bazel at build time and
we should not assume that Bazel is available globally.
Instead, the project should specify an explicit dev dependency on
`@bazel/bazel`.
PR Close#28032
Instead of relying on implicit dependencies through Angular, the WORKSPACE
of the project should explicitly add rules_nodejs and rules_typescript so
it can better control the versions.
PR Close#28000
* Fixes that the flat module out files do not have a proper AMD module name on Windows. This is currently blocking serving a `ng_module` using the Bazel TypeScript `devserver` on Windows.
PR Close#27839
* Currently the protractor utils assume that the specified Bazel server runfile can be resolved by just using the real file system. This is not the case on Windows because the runfiles are not symlinked into the working directory and need to be resolved through the runfile manifest.
PR Close#27915
Currently when building a package on Windows, the typings re-export for secondary entry-points is not valid TypeScript. Similarly the metadata and the "package.json" files use non-posix paths and cause inconsistency within the NPM package.
For example:
_package.json_
```
"esm5": "./esm5\\core.js",
"esm2015": "./esm2015\\core.js",
```
_testing.d.t.s_ (of the `core` package)
```
export * from './testing\testing';
```
PR Close#27829
Due to an incorrect environment variable name, it's currently not possible to launch Protractor on Windows using the Bazel protractor rule.
PR Close#27850
This commit fixes a bug whereby the path of the entry_module is not
consistent with the workspace name, which does not permit dashes
in the name.
PR Close#27719
Relative imports in Typescript files only work when module_name is
defined in ts_library (when run in Node.js).
See issue https://github.com/bazelbuild/rules_typescript/issues/360
With that fixed, `ng test` now works.
`ng build` requires `node_modules` to be available in the project
directory, so it's not usable yet. Running `yarn` in project directory
does not work because of postinstall version check.
PR Close#27715
The default 10 items are often not enough to debug deeply nested compilation operations.
This PR is based on @martinprobst's http://cl/225528216.
PR Close#27678
In order to keep the bazel bin directory as clean as possible, we should not write definition files that are not relevant to a `ng_package` to an undesired location in the bazel bin directory. This currently just happens because we only filter out external definition files while we also should filter out definitions that aren't just in the current package.
The `packager.ts` file currently tries to write these files to the package, but fails because those are not inside of the current package. So the logic to create a relative path for the file fails, and the definition will be copied to a location like:
```js
// Notice the double "bazel-out" here.
C:\Users\Paul\_bazel_Paul\kn4tsvyh\execroot\angular_material\bazel-out\x64_windows-fastbuild\bin\src\bazel-out\x64_windows-fastbuild\bin\src\cdk
```
[See logic that causes this](4f9374951d/packages/bazel/src/ng_package/packager.ts (L105-L124)) (nothing wrong with that logic because it assumes that only paths from within the package are passed to it)
PR Close#27519
ngtsc now produces flat module index files when that option is enabled
in tsconfig, but Bazel still needs the output declared in order for them to
be passed through.
This fixes some tests which verify this behavior on Bazel.
FW-738 #resolve
PR Close#27655
When @angular/bazel is installed, a postinstall script is run to make sure that
the npm version is *exactly* the same as the Angular repository install by
Bazel. This check is overly stringent. Instead, it should enforce that the
version satisfies the range check instead. This is consistent with the range
defined in angular-cli/packages/schematics/angular/utility/latest-versions.ts.
This commit also fixes the Bazel workspace to use the same Rxjs version if it's
already installed.
PR Close#27526
This release of rules_typescript fixes a critical bug: typescript code
was not checked at all, including type-checking, tsetse, and strict deps
fixes#27569
PR Close#27586
`@angular/bazel` currently requires TypeScript 3.1.x as a peer dependency, but comes with `tsickle` as dependency. The current version of `tsickle` that is specified by `@angular/bazel` does not support TypeScript 3.1.x (which is a peer dependency) and therefore we need to make sure that `tsickle` works with the required TypeScript versions.
This change updates `tsickle` to the latest version that comes with b10fb6de0a in order to work with TypeScript 3.1.x.
PR Close#27402
Switch from Skylint to buildifier --lint - this is required for the Bazel 0.20 upgrade since Bazel no longer lets us use the embedded JDK to build and run Java programs, and Skylint is a Java program
PR Close#27489
If user has already installed Angular, Bazel should fetch the same
version. Otherwise, user will see an error in the post-install step
that performs version check.
PR Close#27495
Previously, Bazel/Blaze were only expecting .ngfactory.js and .ngsummary.js
files to be generated in legacy mode. ngtsc was attempting to write those
files, but they ended up being ignored at the Bazel level.
This commit causes Bazel to expect these files, and rearranges the logic
a little bit as the name 'include_ng_files' is now incorrect.
FW-514 FW-737 #resolve
PR Close#27483
This commit allows //packages/bazel/test/ngc-wrapped/... tests to run
under Ivy mode. To get them to pass, it addresses a problem with the
way the tests are configured: both test targets have sloppy .d.ts
dependencies configured, leading to many type errors being generated
in TypeScript for the .d.ts files.
Due to the way ngc directs TypeScript emit, it avoids type-checking
.d.ts files and thus this issue does not surface. ngtsc does a whole-
program emit which results in full .d.ts type-checking by default,
catching this configuration issue.
To fix this, skipLibCheck is added to the tsconfig.jsons for these
tests, which tells TypeScript to skip type-checking of the .d.ts files,
avoiding this problem in a similar way to ngc.
PR Close#27470
In some applications, developers define a `ts_library` that just consists of `d.ts` files (e.g. to type `module.id`; see: https://github.com/angular/material2/blob/master/src/module-typings.d.ts), and expect the `esm5.bzl` file to not throw an error like:
```
target.typescript.replay_params.outputs
struct' object has no attribute 'outputs'
```
The "replay_parameters" property will exist in that case, but is set to "None" because there is no action that should be replayed in favor of producing ES5 outputs. See: https://github.com/bazelbuild/rules_typescript/pull/326. Notice that this right now breaks similarly because an empty `struct()` is returned that does not have a property called `outputs`. [#326](https://github.com/bazelbuild/rules_typescript/pull/326) fixes that by being explicit that there is no _action_ at all.
PR Close#27401
Currently when building the `ng_package` multiple times, the old `ng_package` output will be copied over to the new `ng_package` content. Resulting in packages like `src/cdk/npm_package/npm_package/npm_package/AND_MORE`.
This happens because currently all TypeScript definition files are resolved from within the `binDir`. This is just wrong because it could then take up the `d.ts` files from the previous `ng_package` output. All typescript definitions that belong to the target package, should be resolved through Bazel and copied based on that computation.
Also fixes that `esm` files aren't written to the `ng_package` on Windows. This is because we try to flatten paths using the `path.delimiter` while the path is always using Posix delimiters (causing the paths to be incorrect)
PR Close#27200
* Currently when building the ES5 and ES2015 output, `ngc_wrapped` will fail because it tries to write the `fs.openSync` the tsickle output file at the same time. This causes a runtime exception in Windows and can be fixed by just writing the externs for ES5 mode to the proper ES5 "output root".
PR Close#27200
* Fixes that `ng_package` does not work generate UMD bundles on Windows because the `esm5/` files are not written to the output directory. This is because `rootDirs` and `rootDir` are posix paths and cause invalid relative paths when mixed with Windows backslash paths.
PR Close#27200
Also build releases into a dedicated output_base so you can't
accidentally publish with outdated version stamp.
Bump the version of rules_nodejs so we don't need to create the
symlink_prefixes for the .publish command to work.
PR Close#27362
BREAKING CHANGES:
Bazel users: rules_angular_dependencies() will no longer install transitive dependencies of build_bazel_rules_nodejs and build_bazel_rules_typescript. User WORKSPACE files will now need to install rules_nodejs and rules_typescript transitive deps directly:
```
load("@build_bazel_rules_typescript//:package.bzl", "rules_typescript_dependencies")
rules_typescript_dependencies()
load("@build_bazel_rules_nodejs//:package.bzl", "rules_nodejs_dependencies")
rules_nodejs_dependencies()
```
PR Close#27264
These paths are no longer needed / used.
I had to disable one jit mode spec because it fails now that we actually run it.
I root caused the jit test failure as missing forwardRef support. See FW-645.
PR Close#27278
Some engineers were already on Yarn 0.10.x which was permitted by the range in our package.json#engines
However this introduced 'integrity sha512' lines into the yarn.lock files.
Then when engineers use yarn 0.9 (in particular, Bazel did this) then the lock files get tons of meaningless edits.
We could force everyone back to yarn 0.9 but this commit chooses to instead advance everyone past 0.10
PR Close#27193
* No longer depends on a custom CircleCI docker image that comes with Bazel pre-installed. Since Bazel is now available through NPM, we should be able to use the version from `@bazel/bazel` in order to enforce a consistent environment on CI and locally.
* This also reduces the amount of packages that need to be published (ngcontainer is removed)
PR Close#26691
This makes yarn_install of ngdeps under Bazel faster, since we don't need many of the large dependencies.
It's important because downstream angular/bazel users will observe the same install time.
PR Close#26691
We are close enough to blacklist a few test targets, rather than whitelist targets to run...
Because bazel rules can be composed of other rules that don't inherit tags automatically,
I had to explicitly mark all of our ts_library and ng_module targes with "ivy-local" and
"ivy-jit" tags so that we can create a query that excludes all fixme- tagged targets even
if those targets are composed of other targets that don't inherit this tag.
This is the updated overview of ivy related bazel tags:
- ivy-only: target that builds or runs only under ivy
- fixme-ivy-jit: target that doesn't yet build or run under ivy with --compile=jit
- fixme-ivy-local: target that doesn't yet build or run under ivy with --compile=local
- no-ivy-jit: target that is not intended to build or run under ivy with --compile=jit
- no-ivy-local: target that is not intended to build or run under ivy with --compile=local
PR Close#26471
This lets Angular Bazel users install our transitive deps, rather than have to list them in their WORKSPACE file.
If they want a different version of one of these deps, they just need to install it before calling rules_angular_dependencies.
PR Close#26488
Add following to your `~/.bazelrc`. This will run the build faster locally
(outside of sandbox), but continue running the builds with sandboxing
on CI.
```
build --spawn_strategy=standalone --strategy=ESM5=sandboxed
```
PR Close#25870
This is needed to let ts_compile_actions take explicit list of srcs and deps to generate tsc actions from another rule. This is no-op for ngc for now.
PR Close#25558
This turns on generation of ngfactory.js files when compiling in Ivy
mode in g3. They're not turned on for Bazel users as there appears to
be a strange interaction with the way our tests run in Bazel mode.
PR Close#25392
compile_strategy() is used to decide whether to build Angular code
using ngc (legacy) or ngtsc (local). In order for g3 BUILD rules
to switch properly and allow testing of Ivy in g3, they need to
import this function.
This commit removes the _ prefix which allows the function to be
imported.
PR Close#25080
It specifies --no-sandbox flag when running the protractor tests as
root. This is needed for running the tests inside a docker container.
PR Close#24906
This change turns on preserve-symlinks in nodejs to verify hermeticity of the Angular build.
BREAKING CHANGE: Use of @angular/bazel rules now requires calling ng_setup_workspace() in your WORKSPACE file.
For example:
local_repository(
name = "angular",
path = "node_modules/@angular/bazel",
)
load("@angular//:index.bzl", "ng_setup_workspace")
ng_setup_workspace()
PR Close#24881
With these changes, the types are a little stricter now and also not
compatible with Protractor's jasmine-like syntax. So, we have to also
use `@types/jasminewd2` for e2e tests (but not for non-e2e tests).
I also had to "augment" `@types/jasminewd2`, because the latest
typings from [DefinitelyTyped][1] do not reflect the fact that the
`jasminewd2` version (v2.1.0) currently used by Protractor supports
passing a `done` callback to a spec.
[1]: 566e039485/types/jasminewd2/index.d.ts (L9-L15)Fixes#23952Closes#24733
PR Close#19904
Previously the repo was depending on an old version of build optimizer.
This change updates to the latest (an RC release in the CLI package).
Additionally, this changes the behavior of ng_rollup_bundle to apply
the optimizer to ngtsc compiled code, and configures it to treat the
@angular/compiler package as side-effect-free.
This results in a substantial size reduction of ngtsc compiled code.
PR Close#24677
This commit builds out enough of the JIT compiler to render
//packages/core/test/bundling/todo, and allows the tests to run in
JIT mode.
To play with the app, run:
bazel run --define=compile=jit //packages/core/test/bundling/todo:prodserver
PR Close#24138
Bazel has a restriction that a single output (eg. a compiled version of
//packages/common) can only be produced by a single rule. This precludes
the Angular repo from having multiple rules that build the same code. And
the complexity of having a single rule produce multiple outputs (eg. an
ngc-compiled version of //packages/common and an Ivy-enabled version) is
too high.
Additionally, the Angular repo has lots of existing tests which could be
executed as-is under Ivy. Such testing is very valuable, and it would be
nice to share not only the code, but the dependency graph / build config
as well.
Thus, this change introduces a --define flag 'compile' with three potential
values. When --define=compile=X is set, the entire build system runs in a
particular mode - the behavior of all existing targets is controlled by
the flag. This allows us to reuse our entire build structure for testing
in a variety of different manners. The flag has three possible settings:
* legacy (the default): the traditional View Engine (ngc) build
* local: runs the prototype ngtsc compiler, which does not rely on global
analysis
* jit: runs ngtsc in a mode which executes tsickle, but excludes the
Angular related transforms, which approximates the behavior of plain
tsc. This allows the main packages such as common to be tested with
the JIT compiler.
Additionally, the ivy_ng_module() rule still exists and runs ngc in a mode
where Ivy-compiled output is produced from global analysis information, as
a stopgap while ngtsc is being developed.
PR Close#24056
Greg Magolan
Keen Yee Liau
Paul Gschwendtner
Filipe Silva
Keen Yee Liau
Daniel Ruf
Igor Minar
Adam Plumer
Suguru Inatomi
Alex Eagle
Alex Eagle
Alex Rickabaugh
Pete Bacon Darwin
Misko Hevery
Alex Eagle
mrmeku
Alan Agius
Greg Estren
Vikram Subramanian
Wei Huang
Victor Berchet
Martin Probst
Ben Lesh
Fabian Wiles
George Kalpakas