Fixes ngtsc incorrectly logging an unknown element diagnostic for HTML elements that are inside an SVG `foreignObject` with the `xhtml` namespace.
Fixes#34171.
PR Close#34178
Prior to this commit, the unknown element can happen twice for AOT-compiled components: once during compilation and once again at runtime. Due to the fact that `schemas` information is not present on Component and NgModule defs after AOT compilation, the second check (at runtime) may fail, even though the same check was successful at compile time. This commit updates the code to avoid the second check for AOT-compiled components by checking whether `schemas` information is present in a logic that executes the unknown element check.
PR Close#34024
Prior to this commit, there was a runtime check in i18n logic to make sure "other" case is always present in an ICU. That was not a requirement in View Engine, so ICUs that previously worked may produce errors. This commit removes that restriction and adds support for ICUs without "other" cases.
PR Close#34042
When inserting a `viewRef` it is possible to not provide
an `index`, which is regarded as appending to the end of
the container.
If the `viewRef` already exists in the container, then
this results in a move. But there was a fault in the logic
that computed where to insert the `viewRef` that did not
account for the fact that the `viewRef` was already in
the container, so the insertion `index` was outside the
bounds of the array.
Fixes#33924
PR Close#34052
Prior to this commit, all styles extracted from Component's template (defined using <style> tags) were ignored by JIT compiler, so only `styles` array values defined in @Component decorator were used. This change updates JIT compiler to take styles extracted from the template into account. It also ensures correct order where `styles` array values are applied first and template styles are applied second.
PR Close#34017
This commit fixes a compatibility bug where pre-order lifecycle
hooks (onInit, doCheck, OnChanges) for directives on the same
host node were executed based on the order the directives were
matched, rather than the order the directives were instantiated
(i.e. injection order).
This discrepancy can cause issues with forms, where it is common
to inject NgControl and try to extract its control property in
ngOnInit. As the NgControl directive is injected, it should be
instantiated before the control value accessor directive (and
thus its hooks should run first). This ensures that the NgControl
ngOnInit can set up the form control before the ngOnInit
for the control value accessor tries to access it.
Closes#32522
PR Close#34026
The assertion that we have in the `directiveInject` instruction is too restrictive and we came across some pattern where it throws unnecessarily. This commit removes that assertion for now and more detailed investigation is needed to decide is we need to restrict the set of TNodeType again.
This commit also adds a test which triggered the TNodeType.View to come up in the `directiveInject` instruction, so it might be useful to avoid regressions during further refactoring.
PR Close#33948
When asking for a ViewContainerRef on <ng-container> we do reuse <ng-container> comment
node as a LContainer's anachor. Before this fix the act of re-using a <ng-container>'s
comment node would result in this comment node being re-appended to the DOM in the wrong
place. With the fix in this PR we make sure that re-using <ng-container>'s comment node
doesn't result in unwanted DOM manipulation (ng-gontainer's comment node is already part
of the DOM and doesn't have to be re-created / re-appended).
PR Close#33816
Prior to this commit the assert that we have in `directiveInject` (assert introduced recently) didn't include IcuContainer TNode type and as a result, the error is thrown in case pipes with dependencies are used inside ICUs. This commit extends the assert to allow for IcuContainer TNode types.
PR Close#33832
Currently if a consumer does something like the following, the object literal will be shared across the two elements and any instances of the component template. The same applies to array literals:
```
<div [someDirective]="{}"></div>
<div [someDirective]="{}"></div>
```
These changes make it so that we generate a pure function even if an object is constant so that each instance gets its own object.
Note that the original design for this fix included moving the pure function factories into the `consts` array. In the process of doing so I realized that pure function are also used inside of directive host bindings which means that we don't have access to the `consts`.
These changes also:
* Fix an issue that meant that the `pureFunction0` instruction could only be run during creation mode.
* Make the `getConstant` utility slightly more convenient to use. This isn't strictly required for these changes to work, but I had made it as a part of a larger refactor that I ended up reverting.
PR Close#33705
This is a breaking change in nodejs rules 0.40.0 as part of the API review & cleanup for the 1.0 release. Their APIs are identical as ts_web_test was just karma_web_test without the config_file attribute.
PR Close#33802
Prior to this change, setting style prop value to undefined or empty string would not result in resetting prop value in case the style prop is defined using [style.prop.px] syntax. The problem is that the check for empty value (and thus reseting the value) considered successful only in case of `null` value. This commit updates the check to use `isStylingValueDefined` function that also checks for undefined and empty string.
PR Close#33780
Prior to this change, ComponentFactory.create function invocation in Ivy retained the content of the host element (in case host element reference or CSS seelctor is provided as an argument). This behavior is different in View Engine, where the content of the host element was cleared, except for the case when ShadowDom encapsulation is used (to make sure native slot projection works). This commit aligns Ivy and View Engine and makes sure the host element is cleared before component content insertion.
PR Close#33487
Prior to this change, namespaced elements such as SVG elements would not
participate correctly in directive matching as their namespace was not
ignored, which was the case with the View Engine compiler. This led to
incorrect behavior at runtime and template type checking.
This commit resolved the issue by ignoring the namespace of elements and
attributes like they were in View Engine.
Fixes#32061
PR Close#33555
When debugging `LView`s it is easy to get lost since all of them have
the same name. This change does three things:
1. It makes `TView` have an explicit type:
- `Host`: for the top level `TView` for bootstrap
- `Component`: for the `TView` which represents components template
- `Embedded`: for the `TView` which represents an embedded template
2. It changes the name of `LView` to `LHostView`, `LComponentView`, and
`LEmbeddedView` depending on the `TView` type.
3. For `LComponentView` and `LEmbeddedView` we also append the name of
of the `context` constructor. The result is that we have `LView`s which
are name as: `LComponentView_MyComponent` and `LEmbeddedView_NgIfContext`.
The above changes will make it easier to understand the structure of the
application when debugging.
NOTE: All of these are behind `ngDevMode` and will get removed in
production application.
PR Close#33449
Prior to this commit, i18n runtime logic used `elementAttributeInternal` function (that uses `setAttribute` function under the hood) for all elements where i18n attributes are present. However the `<ng-container>` elements in a template may also have i18n attributes and calling `setAttribute` fails, since they are represented as comment nodes in DOM. This commit ensures that we call `setAttribute` on nodes with TNodeType.Element type (that support that operation) only.
PR Close#33599
This patch introduces a `firstUpdatePass` flag which can be used inside
of instruction code to determine if this is the first time each
instruction is running inside of the update block of a template or
a hostBindings function.
PR Close#31270
In ViewEngine we used to throw an error if we encountered an unknown element while rendering. We have this already for Ivy in AoT, but we didn't in JiT. These changes implement the error for JiT mode.
PR Close#33419
Prior to this commit, i18n logic which ensures that elements removed in a translation are also removed in DOM, didn't take into account the fact that elements may have local refs. As a result, remove operation failed, since there is no corresponding tNode found. This commit updates the logic to skip all local refs while going though the list of nodes to ensure that DOM matches elements present in translation.
PR Close#33415
`bindingIndex` stores the current location of the bindings in the
template function. Because it used to be stored in `LView` that `LView`
was not reentrant. This could happen if a binding was a getter and had
a side-effect of calling `detectChanges()`.
By moving the `bindingIndex` to `LFrame` where all of the global state
is kept in reentrant way we correct the issue.
PR Close#33235
Removes `ngBaseDef` from the compiler and any runtime code that was still referring to it. In the cases where we'd previously generate a base def we now generate a definition for an abstract directive.
PR Close#33264
This commit adds CopyDefinitionFeature, which supports the case where an
entire decorator (@Component or @Directive) is inherited from parent to
child.
The existing inheritance feature, InheritDefinitionFeature, supports merging
of parent and child definitions when both were originally present. This
merges things like inputs, outputs, host bindings, etc.
CopyDefinitionFeature, on the other hand, compensates for a definition that
was missing entirely on the child class, by copying fields that aren't
ordinarily inherited (like the template function itself).
This feature is intended to only be used as part of ngcc code generation.
PR Close#33362
This patch ensures that the `[style]` and `[class]` based bindings
are directly applied to an element's style and className attributes.
This patch optimizes the algorithm so that it...
- Doesn't construct an update an instance of `StylingMapArray` for
`[style]` and `[class]` bindings
- Doesn't apply `[style]` and `[class]` based entries using
`classList` and `style` (direct attributes are used instead)
- Doesn't split or iterate over all string-based tokens in a
string value obtained from a `[class]` binding.
This patch speeds up the following cases:
- `<div [class]>` and `<div class="..." [class]>`
- `<div [style]>` and `<div style="..." [style]>`
The overall speec increase is by over 5x.
PR Close#33336
`LFrame` stores information specifice to the current `LView` As the code
enters and leaves `LView`s we use `enterView()` and `leaveView()`
respectively to build a a stack of `LFrame`s. This allows us to easily
restore the previous `LView` instruction state.
PR Close#33178
Prior to this fix if a map-based class or style binding wrote
its values onto an elemenent, the internal styling context would
not register the binding if the initial value as a `NO_CHANGE`
value. This situation occurs if a directive takes control of the
`class` or `style` input values and then returns a `NO_CHANGE` value
if the initial value is empty.
This patch ensures that all bindings are always registered with the
`TStylingContext` data-structure even if their initial value is
an instance of `NO_CHANGE`.
PR Close#33236
Prior to this fix, all style/class bindings (e.g. `[style]` and
`[class.foo]`) would quietly update a binding value if and when the
current binding value changes during checkNoChanges.
With this patch, all styling instructions will properly check to see
if the value has changed during the second pass of detectChanges()
if checkNoChanges is active.
PR Close#33103
Prior to this commit, metadata defined on ICU container element was not inherited by the ICU if the whole message is a single ICU (for example: `<ng-container i18n="meaning|description@@id">{count, select, ...}</ng-container>). This commit updates the logic to use parent container i18n meta information for the cases when a message consists of a single ICU.
Fixes#33171
PR Close#33191
Prior to this commit, all `className` inputs were not set because the runtime code assumed that the `classMap` instruction is only generated for `[class]` bindings. However the `[className]` binding also produces the same `classMap`, thus the code needs to distinguish between `class` and `className`. This commit adds extra logic to select the right input name and also throws an error in case `[class]` and `[className]` bindings are used on the same element simultaneously.
PR Close#33188
Prior to this commit, Ivy runtime asserted that a given element is an instance of a DOM node. These asserts may not be correct in case custom renderer is used, which operates objects with a shape different than DOM nodes. This commit updates the code to avoid the mentioned checks in case procedural renderer is used.
PR Close#33156
crisbeto
Andrew Kushnir
Pete Bacon Darwin
Kara Erickson
horn
Pawel Kozlowski
Miško Hevery
Greg Magolan
JoostK
JiaLiPassion
Matias Niemelä
Alex Rickabaugh