The `computeStaticStyling` will be used for computing static styling value during `firstCreatePass`.
The function takes into account static styling from the template as well as from the host bindings. The host bindings need to be merged in front of the template so that they have the correct priority.
PR Closes#34418
This change moves information from instructions to declarative position:
- `ɵɵallocHostVars(vars)` => `DirectiveDef.hostVars`
- `ɵɵelementHostAttrs(attrs)` => `DirectiveDef.hostAttrs`
When merging directives it is necessary to know about `hostVars` and `hostAttrs`. Before this change the information was stored in the `hostBindings` function. This was problematic, because in order to get to the information the `hostBindings` would have to be executed. In order for `hostBindings` to be executed the directives would have to be instantiated. This means that the directive instantiation would happen before we had knowledge about the `hostAttrs` and as a result the directive could observe in the constructor that not all of the `hostAttrs` have been applied. This further complicates the runtime as we have to apply `hostAttrs` in parts over many invocations.
`ɵɵallocHostVars` was unnecessarily complicated because it would have to update the `LView` (and Blueprint) while existing directives are already executing. By moving it out of `hostBindings` function we can access it statically and we can create correct `LView` (and Blueprint) in a single pass.
This change only changes how the instructions are generated, but does not change the runtime much. (We cheat by emulating the old behavior by calling `ɵɵallocHostVars` and `ɵɵelementHostAttrs`) Subsequent change will refactor the runtime to take advantage of the static information.
PR Close#34683
Fixes Ivy detecting changes inside child embedded views, even though they're detached.
Note that there's on subtlety here: I made the changes inside `refreshDynamicEmbeddedViews` rather than `refreshView`, because we support detecting changes on a detached view (evidenced by a couple of unit tests), but only if it's triggered directly from the view's `ChangeDetectorRef`, however we shouldn't be detecting changes in the detached child view when something happens in the parent.
Fixes#34816.
PR Close#34846
Previously, while trying to build an `NgccReflectionHost`'s
`privateDtsDeclarationMap`, `computePrivateDtsDeclarationMap()` would
try to collect exported declarations from all source files of the
program (i.e. without checking whether they were within the target
package, as happens for declarations in `.d.ts` files).
Most of the time, that would not be a problem, because external packages
would be represented as `.d.ts` files in the program. But when an
external package had no typings, the JS files would be used instead. As
a result, the `ReflectionHost` would try to (unnecessarilly) parse the
file in order to extract exported declarations, which in turn would be
harmless in most cases.
There are certain cases, though, where the `ReflectionHost` would throw
an error, because it cannot parse the external package's JS file. This
could happen, for example, in `UmdReflectionHost`, which expects the
file to contain exactly one statement. See #34544 for more details on a
real-world failure.
This commit fixes the issue by ensuring that
`computePrivateDtsDeclarationMap()` will only collect exported
declarations from files within the target package.
Jira issue: [FW-1794](https://angular-team.atlassian.net/browse/FW-1794)
Fixes#34544
PR Close#34811
Since I was learning the codebase and had a hard time understanding what was going on I've done a
bunch of changes in one commit that under normal circumstances should have been split into several
commits. Because this code is likely going to be overwritten with Misko's changes I'm not going to
spend the time with trying to split this up.
Overall I've done the following:
- I processed review feedback from #34307
- I did a bunch of renaming to make the code easier to understand
- I refactored some internal functions that were either inefficient or hard to read
- I also updated lots of type signatures to correct them and to remove many casts in the code
PR Close#34307
skipLibCheck=false is currently the default (in tsc 3.7.4) but it wouldn't be shocking if the default
changed in the future because skipLibCheck=true makes more sense in almost all scenarios. So just to be
defensive and explicit, I'm setting the flag to false even though it's the current default.
PR Close#34798
This release resolves the bootstrap require patching issue with jasmine_node_test. Require patches are now included before any bootstrap scripts.
PR Close#34736
This brings in a few minor fixes including a better way to patch require for bootstrap scripts
Also remove install_source_map_support attribute from nodejs_binary targets This attribute will be removed from nodejs_binary in the future
PR Close#34736
For the purposes of the integration test the zone.js script & bundle script tags can just go into the source index.html itself. The purpose of the integration test is is to test @angular/bazel & ng_module & ng_package so there is no need to exercise html_insert_assets in integration/bazel.
PR Close#34736
For the purposes of the integration test the zone.js script & bundle script tags can just go into the source index.html itself. The purpose of the integration test is is to test @angular/bazel & ng_module & ng_package so there is no need to exercise html_insert_assets in integration/bazel.
PR Close#34589
Previously, if `UmdRenderingFormatter#addImports()` was called with an
empty list of imports to add (i.e. no new imports were needed), it would
add trailing commas in several locations (arrays, function arguments,
function parameters), thus making the code imcompatible with legacy
browsers such as IE11.
This commit fixes it by ensuring that no trailing commas are added if
`addImports()` is called with an empty list of imports.
This is a follow-up to #34353.
Fixes#34525
PR Close#34545
This reverts commit ec7ea77aa8d90d2ba32089e140ed716cb6aadb89 because it's part
of a PR that was red on CircleCI once it was merged into master (Windows tests
are only run on master, not on PRs).
PR Close#34360
This reverts commit 6b905347bd2294bba703f6d38c983356af58946b because it's part
of a PR that was red on CircleCI once it was merged into master (Windows tests
are only run on master, not on PRs).
PR Close#34360
This reverts commit 810b7072d0a9ba0b07162f7a600a75347b06d379 because it's part
of a PR that was red on CircleCI once it was merged into master (Windows tests
are only run on master, not on PRs).
PR Close#34360
This reverts commit 4e38a973b158ba397903199abe1e008b0627d81c because it's part of a PR
that was red on CircleCI once it was merged into master (Windows tests are only run
on master, not on PRs).
PR Close#34360
This release brings a bug fix that https://github.com/angular/angular/pull/34243 is waiting on in order to remove rules_nodejs patches: fix(builtin): additional_root_paths in pkg_web should also include paths in genfiles and bin dirs (bazelbuild/rules_nodejs#1402)
PR Close#34112
For the purposes of the integration test the zone.js script & bundle script tags could just go into the source index.html itself. The purpose of the integration test is is to test @angular/bazel & ng_module & ng_package so there is no need to exercise html_insert_assets.
PR Close#34112
This commit updates `@angular/material` and `@angular/cdk` to the
latest release candidate. Doing so exposed a bug in ngcc, which is fixed
by the preceding commit. Also the layout of these libraries changed, so
the checks in the integration test need a bit of tweaking.
PR Close#34212
We should only generate the `providedIn` property in injectable
defs if it has a non-null value. `null` does not communicate
any information to the runtime that isn't communicated already
by the absence of the property.
This should give us some modest code size savings.
PR Close#34116
For injectables, we currently generate a factory function in the
injectable def (prov) that delegates to the factory function in
the factory def (fac). It looks something like this:
```
factory: function(t) { return Svc.fac(t); }
```
The extra wrapper function is unnecessary since the args for
the factory functions are the same. This commit changes the
compiler to generate this instead:
```
factory: Svc.fac
```
Because we are generating less code for each injectable, we
should see some modest code size savings. AIO's main bundle
is about 1 KB smaller.
PR Close#34076
This allows us to update the version of the package in a single place for all tests.
Notable exemption of this is aio which currently doesn't depend on anything installed in the root.
PR Close#34002
Previously, the Angular AOT compiler would always add a
`ɵprov` to injectables. But in ngcc this resulted in duplicate `ɵprov`
properties since published libraries already have this property.
Now in ngtsc, trying to add a duplicate `ɵprov` property is an error,
while in ngcc the additional property is silently not added.
// FW-1750
PR Close#34085
In order to keep integration tests on CI as determinitstic as possible,
we need to ensure that the same dependencies (including transitive ones)
are installed each time. One way to ensure that is using a lockfile
(such as `yarn.lock`) to pin the dependencies to exact versions. This
works as long as the lockfile itself is in-sync with the corresponding
`package.json`, which specifies the dependencies.
Ideally, we would run `yarn install` with the `--frozen-lockfile` option
to verify that the lockfile is in-sync with `package.json`, but we
cannot do that for integration projects, because we want to be able to
install the locally built Angular packages). Therefore, we must manually
esnure that the integration project lockfiles remain in-sync, which is
error-prone.
This commit introduces a helper script that performs some checks on each
project's (non-local) dependencies:
- Ensure that exact versions (not version ranges) are specified in
`package.json`. This reduces the probability of installing a breaking
version of a direct or transitive dependency, in case of an
out-of-sync lockfile.
- Ensure that the lockfile is in-sync with `package.json` wrt these
dependencies.
While these checks are not full-proof, they provide yet another line of
defense against indeterminism.
PR Close#33968
Since we cannot run `yarn install` with the `--frozen-lockfile` option
(because we want to be able to install the locally built Angular
packages), integration project lockfiles are susceptible to getting
out-of-sync with the corresponding `package.json`. When this happens,
yarn will install the latest available version that satisfies the
version range specified in `package.json`.
This commit adds another line of defense, by specifying exact versions
for the dependencies in `package.json` files (i.e. `1.33.7` instead of
`^1.33.0`). While transitive dependencies will be unpinned, this still
ensures that the same version of direct dependencies will be installed
in case of an out-of-sync lockfile, thus reducing the probability of
random failures.
PR Close#33968
In the `integration_test` CircleCI job, we run `yarn install` on all
projects in the `integration/` directory. If a project has no lockfile
or if the lockfile is out-of-sync with the corresponding `package.json`
file, then the installed dependency versions are no longer pinned, which
can result in different versions being installed between different runs
of the same job (if, for example, a new version is released for a
package) and breaks hermeticity.
This could be prevented by using the `--frozen-lockfile` option with
`yarn install`, but this is not possible with the current setup, because
yarn needs to be able to install the locally built Angular packages,
whose checksums will be different from the ones in the lockfile.
Therefore, we have to manually ensure that the lockfiles remain in-sync
with the corresponding `package.json` files for the rest of the
dependencies.
For example, previously, [cli-hello-world-lazy/yarn.lock][1] had an
entry for `@angular-devkit/build-angular@0.900.0-next.9` (pinned to
`0.900.0-next.9`), but [cli-hello-world-lazy/package.json][2] specified
the `@angular-devkit/build-angular` version as `^0.900.0-rc.0` (note the
leading caret). As a result, since the version in the lock file does not
much the one in `package.json`, the lockfile is ignored and the latest
available version that matches `^0.900.0-rc.0` is installed.
This, for example, started causing unrelated CI failures ([example][3]),
when `@angular-devkit/build-angular@9.0.0-rc.3` was released with a size
improvement.
This commit ensures that all integration projects have a lockfile and
that lockfiles are up-to-date (with the current `package.json` files).
[1]: https://github.com/angular/angular/blob/fc2f6b845/integration/cli-hello-world-lazy/yarn.lock#L13
[2]: https://github.com/angular/angular/blob/fc2f6b845/integration/cli-hello-world-lazy/package.json#L26
[3]: https://circleci.com/gh/angular/angular/535959#tests/containers/2
PR Close#33968
Now that all compile decisions are determined by the define=angular_ivy_enabled
flag, we can remove the setting of the define=compile flag throughout the repo.
PR Close#33983
Beginning of migration away from --define=compile=* to --define=angular_ivy_enabled=*.
Additionally, to make it clearer to developers, we will encourage use of --config=ivy
instead of directy setting the --define flag, this abstraction will allow us more
flexibility as we move foward with relation to our compile decisions at build time.
PR Close#33983
This commit fixes a compatibility bug where pre-order lifecycle
hooks (onInit, doCheck, OnChanges) for directives on the same
host node were executed based on the order the directives were
matched, rather than the order the directives were instantiated
(i.e. injection order).
This discrepancy can cause issues with forms, where it is common
to inject NgControl and try to extract its control property in
ngOnInit. As the NgControl directive is injected, it should be
instantiated before the control value accessor directive (and
thus its hooks should run first). This ensures that the NgControl
ngOnInit can set up the form control before the ngOnInit
for the control value accessor tries to access it.
Closes#32522
PR Close#34026
At the end of the `integration/run_tests.sh` script, we check and upload
the payload sizes of UMD bundles in `dist/packages-dist/`. At some
point, we started sharding the integration tests on CI to speed the
overall build time. As a result, checking and uploading of UMD bundle
sizes was run multiple times (once per shard).
Given that the data is identical on each shard, the data was just
overwriting the previously uploaded data. Even if the end result is the
same, checking and uploading the data multiple times is wasteful.
This commit fixes `integration/run_tests.sh` to only check/upload UMD
bundle sizes on the 1st shard.
PR Close#33987
The change type was only recorded for `aio/` and was not correct anyway.
For example:
- It considered `package.json` changes as `application` (even if only
`package.json` and `yarn.lock` had changed).
- It failed to account for changes in `@angular/*` dependencies, when
using the locally built Angular packages (instead reporting them as
`other`).
- It only looked at the last commit, so it failed to provide accurate
information for multi-commit builds (which are rare, but possible).
For the above reasons (and because there is no straight-forward way of
fixing it), this commit removes the change type from the uploaded data.
If necessary, it is still possible to find the type of changes from the
uploaded info (e.g. extract the associated commits and look at their
changes using git).
PR Close#33987
Under bazel and Ivy we don't need the shim files to be emmited by default.
We still need to the shims for blaze however because google3 code imports them.
This improves build latency by 1-2 seconds per ng_module target.
PR Close#33765
The size diff threshold of 1% has proven to be too lenient for us
to catch size regressions in AIO. Since the AIO main bundle is
between 400-500 KB, a size regression must be between 4-5 KB before
it will cause the tests to fail. As a result, we may merge many
changes with smaller regressions of a few KB before the size test
eventually lets us know that the number has increased. The hope is
that lowering the threshold will help us catch the smaller
regressions during code review and prevent the size tests failing at
a random later time when someone catches the size "hot potato".
PR Close#33969
This commit transforms the setClassMetadata calls generated by ngtsc from:
```typescript
/*@__PURE__*/ setClassMetadata(...);
```
to:
```typescript
/*@__PURE__*/ (function() {
setClassMetadata(...);
})();
```
Without the IIFE, terser won't remove these function calls because the
function calls have arguments that themselves are function calls or other
impure expressions. In order to make the whole block be DCE-ed by terser,
we wrap it into IIFE and mark the IIFE as pure.
It should be noted that this change doesn't have any impact on CLI* with
build-optimizer, which removes the whole setClassMetadata block within
the webpack loader, so terser or webpack itself don't get to see it at
all. This is done to prevent cross-chunk retention issues caused by
webpack's internal module registry.
* actually we do expect a short-term size regression while
https://github.com/angular/angular-cli/pull/16228
is merged and released in the next rc of the CLI. But long term this
change does nothing to CLI + build-optimizer configuration and is done
primarly to correct the seemingly correct but non-function PURE annotation
that builds not using build-optimizer could rely on.
PR Close#33337
The `:` char is used as a metadata marker in `$localize` messages.
If this char appears in the metadata it must be escaped, as `\:`.
Previously, although the `:` char was being escaped, the TS AST
being generated was not correct and so it was being output double
escaped, which meant that it appeared in the rendered message.
As of TS 3.6.2 the "raw" string can be specified when creating tagged
template AST nodes, so it is possible to correct this.
PR Close#33820
In View Engine, providers which neither used `useValue`, `useClass`,
`useFactory` or `useExisting`, were interpreted differently.
e.g.
```
{provide: X} -> {provide: X, useValue: undefined}, // this is how it works in View Engine
{provide: X} -> {provide: X, useClass: X}, // this is how it works in Ivy
```
The missing-injectable migration should migrate such providers to the
explicit `useValue` provider. This ensures that there is no unexpected
behavioral change when updating to v9.
PR Close#33709
In #33823, `scripts/package-builds.sh` (which is used by both
`build-packages-dist.sh` and `build-ivy-npm-packages.sh`) was updated to
use `realpath`. It turns out that `realpath` does not exist on macOS, so
the build scripts do not work there.
In order to fix this (and also reduce the likelihood of introducing
similar issues in the future), this commit changes these bash scripts to
Node.js scripts (using [ShellJS](https://github.com/shelljs/shelljs) for
a cross-platform implementation of Unix shell commands where necessary).
PR Close#33854
If the application is not running directly in the browser, e.g.
universal or app-shell, then the `$localize` import must be
adding to a different file than for normal browser applications.
This commit adds more information about this to avoid any
confusion.
// FW-1557
PR Close#33826
Previously, ngcc's `Renderer` would add some constants in the processed
files which were emitted as ES2015 code (e.g. `const` declarations).
This would result in invalid ES5 generated code that would break when
run on browsers that do not support the emitted format.
This commit fixes it by adding a `printStatement()` method to
`RenderingFormatter`, which can convert statements to JavaScript code in
a suitable format for the corresponding `RenderingFormatter`.
Additionally, the `translateExpression()` and `translateStatement()`
ngtsc helper methods are augmented to accept an extra hint to know
whether the code needs to be translated to ES5 format or not.
Fixes#32665
PR Close#33514
This is a breaking change in nodejs rules 0.40.0 as part of the API review & cleanup for the 1.0 release. Their APIs are identical as ts_web_test was just karma_web_test without the config_file attribute.
PR Close#33802
In #33046, internal uses of `zone.js` were switched to reference it
directly from source (built with Bazel) instead of npm. As a result, the
necessary scripts were updated to build `zone.js` as necessary. However,
some `integration/**/debug-test.sh` scripts were missed (apparently
because they are not used on CI, but only locally as helpers for
debugging the integration projects).
This commit updates the `scripts/build-packages-dist.sh` script to also
build `zone.js`, so that other scripts (such as the various
`debug-test.sh` scripts) can use it.
PR Close#33733
The legacy nodejs rules rollup_bundle is now deprecated and will be removed in the nodejs rules 1.0 release due in mid-November. This PR brings in the rules_nodejs internal API deps that ng_rollup_bundle, ng_package and ls_rollup_bundle depend on into this repo to break the dependency. In the future these rules should switch to use the new rollup_bundle via a macro as done in https://github.com/angular/angular/pull/33329 but this is not possible right now due to the complication of having esm5 re-rooted ts_library dependencies.
The es6 sources now have .mjs extensions so they no longer need to be re-rooted to `{package}.es6`. This eliminates the need for the collect_es6_sources() function.
Note: repo has been updated to the newest working version of rollup which is 1.25.2. There is some regression in 1.26.0 which causes the following bundling failure:
```
ERROR: /Users/greg/google/angular/packages/localize/BUILD.bazel:20:1: Optimizing JavaScript packages/localize/localize.umd.min.js [terser] failed (Exit 1) terser.sh failed: error executing command bazel-out/host/bin/external/npm/terser/bin/terser.sh bazel-out/darwin-fastbuild/bin/packages/localize/localize.umd.js --output bazel-out/darwin-fastbuild/bin/packages/localize/localize.umd.min.js ... (remaining 5 argument(s) skipped)
Use --sandbox_debug to see verbose messages from the sandbox
Parse error at packages/localize/localize.umd.js:491,4
export * from './src/constants';
^
ERROR: Export statement may only appear at top level
at js_error (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/parse.js:357:11)
at Dn.visit (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/scope.js:347:13)
at Dn._visit (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:1207:24)
at AST_Export._walk (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:718:17)
at walk_body (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:168:17)
at AST_Function.call (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:430:13)
at descend (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:1208:21)
at Dn.visit (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/scope.js:256:13)
at Dn._visit (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:1207:24)
at AST_Function._walk (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:424:24)
[Function]
Target //packages/localize:npm_package failed to build
Use --verbose_failures to see the command lines of failed build steps.
ERROR: /Users/greg/google/angular/packages/localize/BUILD.bazel:20:1 Optimizing JavaScript packages/localize/localize.umd.min.js [terser] failed (Exit 1) terser.sh failed: error executing command bazel-out/host/bin/external/npm/terser/bin/terser.sh bazel-out/darwin-fastbuild/bin/packages/localize/localize.umd.js --output bazel-out/darwin-fastbuild/bin/packages/localize/localize.umd.min.js ... (remaining 5 argument(s) skipped)
```
Will leave that for another day.
Terser also updated to 4.3.3. Updating to 4.3.4 (https://github.com/terser/terser/blob/master/CHANGELOG.md) turns comments preservation on by default which increases the size of the //packages/core/test/bundling/todo:bundle.min.js in CI. After bazelbuild/rules_nodejs#1317 terser can be updated to the latest as passing —comments /a^/ to args can turn off all comments for the //packages/core/test/bundling/todo:bundle.min.js size test.
PR Close#33201
PR Close#33607
This patch gets rid of the configuration settings present in the
`TStylingContext` array that is used within the styling algorithm
for `[style]`, `[style.prop]`, `[class]` and `[class.name]` bindings.
These configurations now all live inside of the `TNodeFlags`.
PR Close#33540
The legacy nodejs rules rollup_bundle is now deprecated and will be removed in the nodejs rules 1.0 release due in mid-November. This PR brings in the rules_nodejs internal API deps that ng_rollup_bundle, ng_package and ls_rollup_bundle depend on into this repo to break the dependency. In the future these rules should switch to use the new rollup_bundle via a macro as done in https://github.com/angular/angular/pull/33329 but this is not possible right now due to the complication of having esm5 re-rooted ts_library dependencies.
The es6 sources now have .mjs extensions so they no longer need to be re-rooted to `{package}.es6`. This eliminates the need for the collect_es6_sources() function.
Note: repo has been updated to the newest working version of rollup which is 1.25.2. There is some regression in 1.26.0 which causes the following bundling failure:
```
ERROR: /Users/greg/google/angular/packages/localize/BUILD.bazel:20:1: Optimizing JavaScript packages/localize/localize.umd.min.js [terser] failed (Exit 1) terser.sh failed: error executing command bazel-out/host/bin/external/npm/terser/bin/terser.sh bazel-out/darwin-fastbuild/bin/packages/localize/localize.umd.js --output bazel-out/darwin-fastbuild/bin/packages/localize/localize.umd.min.js ... (remaining 5 argument(s) skipped)
Use --sandbox_debug to see verbose messages from the sandbox
Parse error at packages/localize/localize.umd.js:491,4
export * from './src/constants';
^
ERROR: Export statement may only appear at top level
at js_error (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/parse.js:357:11)
at Dn.visit (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/scope.js:347:13)
at Dn._visit (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:1207:24)
at AST_Export._walk (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:718:17)
at walk_body (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:168:17)
at AST_Function.call (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:430:13)
at descend (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:1208:21)
at Dn.visit (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/scope.js:256:13)
at Dn._visit (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:1207:24)
at AST_Function._walk (/private/var/tmp/_bazel_greg/5e8f8a9cd1c6fbc1afd11e37ee1fe2e5/sandbox/darwin-sandbox/79/execroot/angular/bazel-out/host/bin/external/npm/terser/bin/terser.sh.runfiles/npm/node_modules/terser/lib/ast.js:424:24)
[Function]
Target //packages/localize:npm_package failed to build
Use --verbose_failures to see the command lines of failed build steps.
ERROR: /Users/greg/google/angular/packages/localize/BUILD.bazel:20:1 Optimizing JavaScript packages/localize/localize.umd.min.js [terser] failed (Exit 1) terser.sh failed: error executing command bazel-out/host/bin/external/npm/terser/bin/terser.sh bazel-out/darwin-fastbuild/bin/packages/localize/localize.umd.js --output bazel-out/darwin-fastbuild/bin/packages/localize/localize.umd.min.js ... (remaining 5 argument(s) skipped)
```
Will leave that for another day.
Terser also updated to 4.3.3. Updating to 4.3.4 (https://github.com/terser/terser/blob/master/CHANGELOG.md) turns comments preservation on by default which increases the size of the //packages/core/test/bundling/todo:bundle.min.js in CI. After bazelbuild/rules_nodejs#1317 terser can be updated to the latest as passing —comments /a^/ to args can turn off all comments for the //packages/core/test/bundling/todo:bundle.min.js size test.
PR Close#33201
Several commits merged into master recently resulted in minor payload size improvement. This commit updates the payload size limit to make corresponding CI checks pass.
PR Close#33587
This patch introduces a `firstUpdatePass` flag which can be used inside
of instruction code to determine if this is the first time each
instruction is running inside of the update block of a template or
a hostBindings function.
PR Close#31270
Also removes `build:remote --spawn_strategy=remote` from .bazelrc. It seems that with Bazel 1.0.0 setting `--incompatible_list_based_execution_strategy_selection=false` no longer works around the issue with npm_package that it did when it was added. The error that was originally observed has returned after updating to Bazel 1.0.0:
```
ERROR: /home/circleci/ng/packages/angular_devkit/build_optimizer/BUILD:66:1: Assembling npm package packages/angular_devkit/build_optimizer/npm_package failed: No usable spawn strategy found for spawn with mnemonic Action. Your --spawn_strategy, --genrule_strategy or --strategy flags are probably too strict. Visit https://github.com/bazelbuild/bazel/issues/7480 for migration advice
```
This commit removes both `—incompatible_list_based_execution_strategy_selection=false` as well as `build:remote --spawn_strategy=remote` which means that Bazel will do the default behavior of picking the first available strategy from the default list, which is `remote,worker,sandboxed,local`. See https://github.com/bazelbuild/bazel/issues/7480 for more details.
Not updating to Bazel 1.1.0 yet due to a docker permissions CI issue that was observed on the angular repo that is unresolved. See https://github.com/angular/angular/pull/33367#issuecomment-547643246.
PR Close#33476
Note: the @angular/bazel schematic now appends the package.json "script" field with 'ngcc --properties es2015 browser module main'. If there is an existing script field with ngcc then the schematic modifies it in place removing `--first-only` and `--create-ivy-entry-points`.
ViewEngine sources under node_modules need to be updated in-place for Bazel as it does not know how to use the `__ivy__` entry points that are created by the non-bazel `ngcc` command that is added to "scripts" :`ngcc --properties es2015 browser module main --first-only --create-ivy-entry-points`.
PR Close#33435
`bindingIndex` stores the current location of the bindings in the
template function. Because it used to be stored in `LView` that `LView`
was not reentrant. This could happen if a binding was a getter and had
a side-effect of calling `detectChanges()`.
By moving the `bindingIndex` to `LFrame` where all of the global state
is kept in reentrant way we correct the issue.
PR Close#33235
This release brings in some important fixes. In particular the 2 segment linker fix for the new rollup_bundle and the strict peerDeps requirement will be important for angular users that opt in to bazel. See https://github.com/bazelbuild/rules_nodejs/releases/tag/0.39.0 for more details.
PR Close#33426
The `localize-translate` command line tool can now accept an array of
target locales to support the case where translation files do not
contain them. Specify this array via the `--target-locales` option.
NOTE to early adopters: in order to support this, the original `-t`
option for the binary has changed from being a glob pattern to an array
of paths, which will have matching indices to any provided target-locales.
PR Close#33381
We should not migrate the reference from `useExisting`. This is because
developers can only use the `useExisting` value as a token. e.g.
```ts
@NgModule({
providers: [
{provide: AppRippleConfig, useValue: rippleOptions},
{provide: MAT_RIPPLE_OPTIONS, useExisting: AppRippleConfig},
]
})
export class AppModule {}
```
In the case above, nothing should be decorated with `@Injectable`. The
`AppRippleConfig` class is just used as a token for injection.
PR Close#33286
Removes `ngBaseDef` from the compiler and any runtime code that was still referring to it. In the cases where we'd previously generate a base def we now generate a definition for an abstract directive.
PR Close#33264
Also removes `build:remote --spawn_strategy=remote` from .bazelrc. It seems that with Bazel 1.0.0 setting `--incompatible_list_based_execution_strategy_selection=false` no longer works around the issue with npm_package that it did when it was added. The error that was originally observed has returned after updating to Bazel 1.0.0:
```
ERROR: /home/circleci/ng/packages/angular_devkit/build_optimizer/BUILD:66:1: Assembling npm package packages/angular_devkit/build_optimizer/npm_package failed: No usable spawn strategy found for spawn with mnemonic Action. Your --spawn_strategy, --genrule_strategy or --strategy flags are probably too strict. Visit https://github.com/bazelbuild/bazel/issues/7480 for migration advice
```
This commit removes both `—incompatible_list_based_execution_strategy_selection=false` as well as `build:remote --spawn_strategy=remote` which means that Bazel will do the default behavior of picking the first available strategy from the default list, which is `remote,worker,sandboxed,local`. See https://github.com/bazelbuild/bazel/issues/7480 for more details.
PR Close#33367
`LFrame` stores information specifice to the current `LView` As the code
enters and leaves `LView`s we use `enterView()` and `leaveView()`
respectively to build a a stack of `LFrame`s. This allows us to easily
restore the previous `LView` instruction state.
PR Close#33178
This commit removes `@angular-devkit/build-angular` from package.json
for a project that opts into Bazel. This is because the package adds a
dependency on node-sass, which is rejected by Bazel due to its absense.
This commit also appends to `scripts.postinstall` if it already exists.
This is needed because `ng new` in CLI v9 now automatically adds a
postinstall step for `ngcc`.
PR Close#32946
These were getting included in the @angular/localize package.
Instead, patch the upstream files to work with TS typeRoots option
See bazelbuild/rules_nodejs#1033
PR Close#33226
Turns out that writing to global state is more expensive than writing to
a property on an object.
Slower:
````
let count = 0;
function increment() {
count++;
}
```
Faster:
````
const state = {
count: 0
};
function increment() {
state.count++;
}
```
This change moves all of the instruction state into a single state object.
`noop_change_detection` benchmark
Pre refactoring: 16.7 us
Post refactoring: 14.523 us (-13.3%)
PR Close#33093
Improves the `missing-injectable` migration test case in the
`ng_update_migrations` integration test by adding scenarios
for the recent changes that have been made to the migration.
e.g. 5557dec120
PR Close#33223
Updates the Angular CLI version in the `ng_update_migrations`
integration test. Since refactorings are made to the `ng update`
command implementation, we want to make sure that everything
works as expected for the migrations in version 9.
PR Close#33223
Injector defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
ngInjectorDef to inj. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.
PR Close#33151
These were getting included in the @angular/localize package.
Instead, patch the upstream files to work with TS typeRoots option
See bazelbuild/rules_nodejs#1033
PR Close#33176
Module defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
ngModuleDef to mod. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.
PR Close#33142
Add a new flag to `localize-translate` that allows the
source locale to be specified. When this locale is
provided an extra copy of the files is made for this
locale where the is no translation but all the calls to
`$localize` are stripped out.
Resolves FW-1623
PR Close#33101
Some changes in rules_nodejs providers folded into @angular/bazel package:
* `NodeModuleSources` renamed to `NpmPackageInfo` and now loaded from `//internal/common:npm_package_info.bzl`
* `collect_node_modules_aspect` renamed to `node_modules_aspect`
* new JS provider `JSNamedModuleInfo` now available and ng_module provides it using the `js_named_module_info` factory function
* sources_aspect has also been removed so the use of the `node_sources` legacy provider has been replaced with `JSNamedModuleInfo`.
PR Close#33073
The new CLI build pipeline will automatically downlevel
ES2015 to ES5 if the tsconfig compilation is set to
ES2015.
This change ensures that the compile-time inlining of
translations handles both the ES2015 code and the
downleveled ES5 code.
PR Close#33097
Previously, the executable for the Angular Compatibility Compiler
(`ngcc`) was called `ivy-ngcc`. This would be confusing for users not
familiar with our internal terminology, especially given that we call it
`ngcc` in all our docs and presentations.
This commit renames the executable to `ngcc` and replaces `ivy-ngcc`
with a script that errors with an informative message (prompting the
user to use `ngcc` instead).
Jira issue: [FW-1624](https://angular-team.atlassian.net/browse/FW-1624)
PR Close#33140
For v9 we want the migration to the new i18n to be as
simple as possible.
Previously the developer had to positively choose to use
legacy messsage id support in the case that their translation
files had not been migrated to the new format by setting the
`legacyMessageIdFormat` option in tsconfig.json to the format
of their translation files.
Now this setting has been changed to `enableI18nLegacyMessageFormat`
as is a boolean that defaults to `true`. The format is then read from
the `i18nInFormat` option, which was previously used to trigger translations
in the pre-ivy angular compiler.
PR Close#33053
This commit implements a tool that will inline translations and generate
a translated copy of a set of application files from a set of translation
files.
PR Close#32881
Removes the `Renderer` and related symbols which have been deprecated since version 4.
BREAKING CHANGES:
* `Renderer` has been removed. Use `Renderer2` instead.
* `RenderComponentType` has been removed. Use `RendererType2` instead.
* `RootRenderer` has been removed. Use `RendererFactory2` instead.
PR Close#33019
This release includes a ts_config runfiles fix so also cleaning up the one line work-around from #31943.
This also updates to upstream rules_webtesting browser repositories load("@io_bazel_rules_webtesting//web/versioned:browsers-0.3.2.bzl", "browser_repositories") to fix a breaking change in the chromedriver distro. This bumps up the version of chromium to the version here: https://github.com/bazelbuild/rules_webtesting/blob/master/web/versioned/browsers-0.3.2.bzl
PR Close#32151
Prior to this patch, each time `advance()` would run (or when a
templateFn or hostBindings code exits) then the core change detection
code would check to see whether the styling data needs to be reset. This
patch removes that functionality and places everything inside of the
scheduled styling exit function. This means that each time one or more
styling bindings run (even if the value hasn't changed) then an exit
function will be scheduled and that will do all the cleanup.
PR Close#32591
This patch is a final major refactor in styling Angular.
This PR includes three main fixes:
All temporary state taht is persisted between template style/class application
and style/class application in host bindings is now removed.
Removes the styling() and stylingApply() instructions.
Introduces a "direct apply" mode that is used apply prop-based
style/class in the event that there are no map-based bindings as
well as property collisions.
PR Close#32259
PR Close#32591
This is a refactoring that moves the source code around to provide a better
platform for adding the compile-time inlining.
1. Move the global side-effect import from the primary entry-point to a
secondary entry-point @angular/localize/init.
This has two benefits: first it allows the top level entry-point to
contain tree-shakable shareable code; second it gives the side-effect
import more of an "action" oriented name, which indicates that importing
it does something tangible
2. Move all the source code into the top src folder, and import the localize
related functions into the localize/init/index.ts entry-point.
This allows the different parts of the package to share code without
a proliferation of secondary entry-points (i.e. localize/utils).
3. Avoid publicly exporting any utilities at this time - the only public
API at this point are the global `$localize` function and the two runtime
helpers `loadTranslations()` and `clearTranslations()`.
This does not mean that we will not expose additional helpers for 3rd
party tooling in the future, but it avoid us preemptively exposing
something that we might want to change in the near future.
Notes:
It is not possible to have the `$localize` code in the same Bazel package
as the rest of the code. If we did this, then the bundled `@angular/localize/init`
entry-point code contains all of the helper code, even though most of it is not used.
Equally it is not possible to have the `$localize` types (i.e. `LocalizeFn`
and `TranslateFn`) defined in the `@angular/localize/init` entry-point because
these types are needed for the runtime code, which is inside the primary
entry-point. Importing them from `@angular/localize/init` would run the
side-effect.
The solution is to have a Bazel sub-package at `//packages/localize/src/localize`
which contains these types and the `$localize` function implementation.
The primary `//packages/localize` entry-point imports the types without
any side-effect.
The secondary `//packages/localize/init` entry-point imports the `$localize`
function and attaches it to the global scope as a side-effect, without
bringing with it all the other utility functions.
BREAKING CHANGES:
The entry-points have changed:
* To attach the `$localize` function to the global scope import from
`@angular/localize/init`. Previously it was `@angular/localize`.
* To access the `loadTranslations()` and `clearTranslations()` functions,
import from `@angular/localize`. Previously it was `@angular/localize/run_time`.
PR Close#32488
This patch is a final major refactor in styling Angular.
This PR includes three main fixes:
All temporary state taht is persisted between template style/class application
and style/class application in host bindings is now removed.
Removes the styling() and stylingApply() instructions.
Introduces a "direct apply" mode that is used apply prop-based
style/class in the event that there are no map-based bindings as
well as property collisions.
PR Close#32259
PR Close#32596
This patch is a final major refactor in styling Angular.
This PR includes three main fixes:
All temporary state taht is persisted between template style/class application
and style/class application in host bindings is now removed.
Removes the styling() and stylingApply() instructions.
Introduces a "direct apply" mode that is used apply prop-based
style/class in the event that there are no map-based bindings as
well as property collisions.
PR Close#32259
Adds support for `styleUrls` definitions in the same way `templateUrl`
definitions are provided; clicking on styleUrl will take a user to the
respective file.
Unifies some code in determining a URL definition. We first check if a
url is a `templateUrl`; if it's not, we check that it's a `styleUrl` or
return no definitions.
PR Close#32464
`ngcc` supports both synchronous and asynchronous execution. The default
mode when using `ngcc` programmatically (which is how `@angular/cli` is
using it) is synchronous. When running `ngcc` from the command line
(i.e. via the `ivy-ngcc` script), it runs in async mode.
Previously, the work would be executed in the same way in both modes.
This commit improves the performance of `ngcc` in async mode by
processing tasks in parallel on multiple processes. It uses the Node.js
built-in [`cluster` module](https://nodejs.org/api/cluster.html) to
launch a cluster of Node.js processes and take advantage of multi-core
systems.
Preliminary comparisons indicate a 1.8x to 2.6x speed improvement when
processing the angular.io app (apparently depending on the OS, number of
available cores, system load, etc.). Further investigation is needed to
better understand these numbers and identify potential areas of
improvement.
Inspired by/Based on @alxhub's prototype: alxhub/angular@cb631bdb1
Original design doc: https://hackmd.io/uYG9CJrFQZ-6FtKqpnYJAA?view
Jira issue: [FW-1460](https://angular-team.atlassian.net/browse/FW-1460)
PR Close#32427
The Language Service integration tests should reinstall the Angular
distribution every time it is built. Adds a `yarn build-dist`
convinience script so building the distribution doesn't have to
happen on the repo root. This new script also refreshes the installed
modules. Building is expesnive, so it is not bundled with testing
scripts.
PR Close#32515
We need to be clearer to developers who upgrade to v9 (next) and get this
error, why they have a problem and what they have to do about it.
Once we have a better CLI schematics story, where this import will be
included by default in new applications and a CLI migration will add it
when upgrading apps to v9, we could simplify or remove this error message.
PR Close#32491
Prior to this fix if a `NO_CHANGE` value was assigned to a binding, or
an interpolation value rendererd a `NO_CHANGE` value, then the presence
of that value would cause the internal counter index values to not
increment properly. This patch ensures that this doesn't happen and
that the counter/bitmask values update accordingly.
PR Close#32143
This is a prerequisite to fix a bug in template completions whereby
completion of the string `ti` for the variable `title` results in
`tititle`.
This is because the position where the completion is requested is used
to insert the completion text. This is incorrect. Instead, a
`replacementSpan` should be used to indicate the span of text that needs
to be replaced. Angular's own `Completion` interface is insufficient to
hold this information. Instead, we should just use ts.CompletionEntry.
Also added string enum for `CompletionKind`, which is similar to
ts.ScriptElementKind but contains more info about HTML entities.
PR Close#32375
This test uses localization in the `AppComponent` component:
* an `i18n` attribute in the template
* a call to the `$localize` tag in the component constructor
PR Close#31609
This commit changes the Angular compiler (ivy-only) to generate `$localize`
tagged strings for component templates that use `i18n` attributes.
BREAKING CHANGE
Since `$localize` is a global function, it must be included in any applications
that use i18n. This is achieved by importing the `@angular/localize` package
into an appropriate bundle, where it will be executed before the renderer
needs to call `$localize`. For CLI based projects, this is best done in
the `polyfills.ts` file.
```ts
import '@angular/localize';
```
For non-CLI applications this could be added as a script to the index.html
file or another suitable script file.
PR Close#31609
Adds a new test to the `ng_update_migrations` that ensures
that the `missing-injectable` migration works properly in a
real CLI project. Additionally this ensures that the
`missing-injectable` and `undecorated-classes-with-di` migrations
play nicely together.
PR Close#32349
Creates anew integratin test for `ng-update` migrations. The
integration test uses an Angular CLI project that will be updated
using the latest package output symlinked from then `./dist/packages-dist`.
This allows us to ensure that migrations work in real CLI projects.
Another big benefit is that the Angular version is updated to the
latest. This is something we couldn't replicate in unit tests but
is extremely important. It's important because compilation could
break with newer Angular versions (note that migrations are always
executed after the new angular version has been installed).
PR Close#32349
Adds support for `getDefinitionAt` when called on a templateUrl
property assignment.
The currrent architecture for getting definitions is designed to be
called on templates, so we have to introduce a new
`getTsDefinitionAndBoundSpan` method to get Angular-specific definitions
in TypeScript files and pass a `readTemplate` closure that will read the
contents of a template using `TypeScriptServiceHost#getTemplates`. We
can probably go in and make this nicer in a future PR, though I'm not
sure what the best architecture should be yet.
Part of angular/vscode-ng-language-service#111
PR Close#32238
Reworks the compiler to output the factories for directives, components and pipes under a new static field called `ngFactoryFn`, instead of the usual `factory` property in their respective defs. This should eventually allow us to inject any kind of decorated class (e.g. a pipe).
**Note:** these changes are the first part of the refactor and they don't include injectables. I decided to leave injectables for a follow-up PR, because there's some more cases we need to handle when it comes to their factories. Furthermore, directives, components and pipes make up most of the compiler output tests that need to be refactored and it'll make follow-up PRs easier to review if the tests are cleaned up now.
This is part of the larger refactor for FW-1468.
PR Close#31953
The documentation for the langauge service plugin integration test
appears to be stale. Remove section about new versions of TypeScript,
which appear not to be tested, and update the information about
generating and updating goldens to reflect the new way of doing so.
Add information about install deps in the repo root, this directory, and
building Angular before testing.
Also remove trailing whitespace on one line.
PR Close#32269
Angular hooks come after 2 flavours:
- init hooks (OnInit, AfterContentInit, AfterViewInit);
- check hooks (OnChanges, DoChanges, AfterContentChecked, AfterViewChecked).
We need to do more processing for init hooks to ensure that those hooks
are run once and only once for a given directive (even in case of errors).
As soon as all init hooks execute to completion we are only left with the
checks to execute.
It turns out that keeping track of the remaining init hooks to execute is
rather expensive (multiple LView flags reads, writes and checks). But we can
observe that non of this tracking is needed as soon as all init hooks are
completed.
This PR takes advantage of the above observations and splits hooks processing
functions into:
- init-specific (slower but less common);
- check-specific (faster and more common).
NOTE: there is code duplication in this PR and it is left like this intentinally:
hand-inlining this perf-critical code makes the view refresh process substentially
faster.
PR Close#32131
Currently, it's not possible to tree-shake away the
coordination layer between HammerJS and Angular's
EventManager. This means that you get the HammerJS
support code in your production bundle whether or
not you actually use the library.
This commit removes the Hammer providers from the
default platform_browser providers list and instead
provides them as part of a `HammerModule`. Apps on
Ivy just need to import the `HammerModule` at root
to turn on Hammer support. Otherwise all Hammer code
will tree-shake away. View Engine apps will require
no change.
BREAKING CHANGE
Previously, in Ivy applications, Hammer providers
were included by default. With this commit, apps
that want Hammer support must import `HammerModule`
in their root module.
PR Close#32203
This commit switches the default value of the enableIvy flag to true.
Applications that run ngc will now by default receive an Ivy build!
This does not affect the way Bazel builds in the Angular repo work, since
those are still switched based on the value of the --define=compile flag.
Additionally, projects using @angular/bazel still use View Engine builds
by default.
Since most of the Angular repo tests are still written against View Engine
(particularly because we still publish VE packages to NPM), this switch
also requires lots of `enableIvy: false` flags in tsconfigs throughout the
repo.
Congrats to the team for reaching this milestone!
PR Close#32219
Bundle size changed in both zone.js(legacy) and zone-evergreen.js
- zone.js(legacy) package increased a little because the following feature and fixes.
1. #31699, handle MSPointer events PR
2. https://github.com/angular/zone.js/pull/1219 to add __zone_symbol__ customization support
- zone-evergreen.js package decreased because
1. the MSPointer PR only for legacy
2. the Object.defineProperty patch is moved to legacy #31660
PR Close#31975
In VE the `Sanitizer` is always available in `BrowserModule` because the VE retrieves it using injection.
In Ivy the injection is optional and we have instructions instead of component definition arrays. The implication of this is that in Ivy the instructions can pull in the sanitizer only when they are working with a property which is known to be unsafe. Because the Injection is optional this works even if no Sanitizer is present. So in Ivy we first use the sanitizer which is pulled in by the instruction, unless one is available through the `Injector` then we use that one instead.
This PR does few things:
1) It makes `Sanitizer` optional in Ivy.
2) It makes `DomSanitizer` tree shakable.
3) It aligns the semantics of Ivy `Sanitizer` with that of the Ivy sanitization rules.
4) It refactors `DomSanitizer` to use same functions as Ivy sanitization for consistency.
PR Close#31934
The tsserver is not meant to handle HTML files, so there is no point
sending an "open" request. The existing test is wrong because the
quickinfo returns "const name: never", which should be
"(property) WidgetComponent.name"
PR Close#32017
Now that the Angular LS is a proper tsserver plugin, it does not make
sense for it to maintain its own language service API.
This is part one of the effort to remove our custom LanguageService
interface.
This interface is cumbersome because we have to do two transformations:
ng def -> ts def -> lsp definition
The TS LS interface is more comprehensive, so this allows the Angular LS
to return more information.
PR Close#31972
In #31426 a fix was implemented to render namespaced decorator imports
correctly, however it turns out that the fix only worked when decorator
information was extracted from static properties, not when using
`__decorate` calls.
This commit fixes the issue by creating the decorator metadata with the
full decorator expression, instead of only its name.
Closes#31394
PR Close#31614
nodejs rules 0.34.0 now includes protractor_web_test_suite rule (via new @bazel/protractor rule) so we switch to that location for that rule in this PR so that /packages/bazel/src/protractor can be removed in a future PR
this PR also brings in node toolchain support which was released in nodejs rules 0.33.0. this is a prerequisite for RBE for mac & windows users
bazel schematics also updated with the same. @bazel/bazel 0.28.1 npm package includes transitive dep on hide-bazel-files so we're able to remove an explicit dep on that as well.
PR Close#31824
In the previous patch () all the existing styling code was turned
off in favor of using the new refactored ivy styling code. This
patch is a follow up patch to that and removes all old, unused
styling code from the render3 directory.
PR Close#31193
This commit is the final patch of the ivy styling algorithm refactor.
This patch swaps functionality from the old styling mechanism to the
new refactored code by changing the instruction code the compiler
generates and by pointing the runtime instruction code to the new
styling algorithm.
PR Close#30742
The support for decorators that were imported via a namespace,
e.g. `import * as core from `@angular/core` was implemented
piecemeal. This meant that it was easy to miss situations where
a decorator identifier needed to be handled as a namepsaced
import rather than a direct import.
One such issue was that UMD processing of decorators was not
correct: the namespace was being omitted from references to
decorators.
Now the types have been modified to make it clear that a
`Decorator.identifier` could hold a namespaced identifier,
and the corresponding code that uses these types has been
fixed.
Fixes#31394
PR Close#31426
This option is changed to true in Bazel 0.27 and exposes a possible
regression in Bazel 0.27.0.
Error observed is in npm_package target `//packages/common/locales:package`:
```
ERROR: /home/circleci/ng/packages/common/locales/BUILD.bazel:13:1: Assembling
npm package packages/common/locales/package failed: No usable spawn strategy found
for spawn with mnemonic SkylarkAction. Your --spawn_strategyor --strategy flags
are probably too strict. Visit https://github.com/bazelbuild/bazel/issues/7480 for
migration advises
```
Suspect is https://github.com/bazelbuild/rules_nodejs/blob/master/internal/npm_package/npm_package.bzl#L75-L82:
```
execution_requirements = {
# Never schedule this action remotely because it's not computationally expensive.
# It just copies files into a directory; it's not worth copying inputs and outputs to a remote worker.
# Also don't run it in a sandbox, because it resolves an absolute path to the bazel-out directory
# allowing the .pack and .publish runnables to work with no symlink_prefix
# See https://github.com/bazelbuild/rules_nodejs/issues/187
"local": "1",
},
```
PR Close#31325
Brings in ts_library fixes required to get angular/angular building after 0.32.0:
typescript: exclude typescript lib declarations in node_module_library transitive_declarations
typescript: remove override of @bazel/tsetse (+1 squashed commit)
@npm//node_modules/foobar:foobar.js labels changed to @npm//:node_modules/foobar/foobar.js with fix for bazelbuild/rules_nodejs#802
also updates to rules_rass commit compatible with rules_nodejs 0.32.0
PR Close#31325
ctx.actions.declare_file now used in @angular/bazel ng_module rule as ctx.new_file is now deprecated. Fixes error:
```
File "ng_module.bzl", line 272, in _expected_outs
ctx.new_file(ctx.genfiles_dir, (ctx.label.name ..."))
Use ctx.actions.declare_file instead of ctx.new_file.
Use --incompatible_new_actions_api=false to temporarily disable this check.
```
This can be worked around with incompatible_new_actions_api flag but may as well fix it proper so downstream doesn't require this flag due to this code.
Also, depset() is no longer iterable by default without a flag. This required fixing in a few spots in @angular/bazel.
fix: foo
PR Close#31325
The Angular runtime frequently calls into user code (for example, when
writing to a property binding). Since user code can throw errors, calls to
it are frequently wrapped in a try-finally block. In Ivy, the following
pattern is common:
```typescript
enterView();
try {
callUserCode();
} finally {
leaveView();
}
```
This has a significant problem, however: `leaveView` has a side effect: it
calls any pending lifecycle hooks that might've been scheduled during the
current round of change detection. Generally it's a bad idea to run
lifecycle hooks after the application has crashed. The application is in an
inconsistent state - directives may not be instantiated fully, queries may
not be resolved, bindings may not have been applied, etc. Invariants that
the app code relies upon may not hold. Further crashes or broken behavior
are likely.
Frequently, lifecycle hooks are used to make assertions about these
invariants. When these assertions fail, they will throw and "swallow" the
original error, making debugging of the problem much more difficult.
This commit modifies `leaveView` to understand whether the application is
currently crashing, via a parameter `safeToRunHooks`. This parameter is set
by modifying the above pattern:
```typescript
enterView();
let safeToRunHooks = false;
try {
callUserCode();
safeToRunHooks = true;
} finally {
leaveView(..., safeToRunHooks);
}
```
If `callUserCode` crashes, then `safeToRunHooks` will never be set to `true`
and `leaveView` won't call any further user code. The original error will
then propagate back up the stack and be reported correctly. A test is added
to verify this behavior.
PR Close#31244
Misko Hevery
Kristiyan Kostadinov
George Kalpakas
Greg Magolan
Igor Minar
Filipe Silva
Andrius
Pawel Kozlowski
atscott
Keen Yee Liau
Kara Erickson
Pete Bacon Darwin
Keen Yee Liau
Christopher Dahm
Joey Perrott
Andrew Kushnir
Alex Rickabaugh
Paul Gschwendtner
JiaLiPassion
Matias Niemelä
atscott
vikerman
Alex Eagle
Alex Eagle
JiaLiPassion
Alan Agius
ayazhafiz
Renovate Bot
cexbrayat
JoostK
Adrien Crivelli