When registering an NgModule based on its id, all transitively imported
NgModules are also registered. This commit introduces a visited set to
avoid traversing into NgModules that are reachable from multiple import
paths multiple times.
Fixes#39487
PR Close#39514
Close#39296
Fix an issue that `markDirty()` will not trigger change detection.
The case is for example we have the following component.
```
export class AppComponent implements OnInit {
constructor(private router: Router) {}
ngOnInit() {
this.router.events
.pipe(filter((e) => e instanceof NavigationEnd))
.subscribe(() => ɵmarkDirty(this));
}
}
export class CounterComponent implements OnInit, OnDestroy {
ngOnInit() {
this.countSubject.pipe(takeUntil(this.destroy)).subscribe((count) => {
this.count = count;
ɵmarkDirty(this);
});
}
```
Then the app navigate from `AppComponent` to `CounterComponent`,
so there are 2 `markDirty()` call at in a row.
The `1st` call is from `AppComponent` when router changed, the
`2nd` call is from `CounterComponent.ngOnInit()`.
And the `markDirty()->scheduleTick()` code look like this
```
function scheduleTick(rootContext, flags) {
const nothingScheduled = rootContext.flags === 0 /* Empty */;
rootContext.flags |= flags;
if (nothingScheduled && rootContext.clean == _CLEAN_PROMISE) {
rootContext.schedule(() => {
...
if (rootContext.flags & RootContextFlags.DetectChanges)
rootContext.flags &= ~RootContextFlags.DetectChanges;
tickContext();
rootContext.clean = _CLEAN_PROMISE;
...
});
```
So in this case, the `1st` markDirty() will
1. set rootContext.flags = 1
2. before `tickContext()`, reset rootContext.flags = 0
3. inside `tickContext()`, it will call `CounterComponent.ngOnint()`,
so the `2nd` markDirty() is called.
4. and the `2nd` scheduleTick is called, `nothingScheduled` is true,
but rootContext.clean is not `_CLEAN_PROMISE` yet, since the `1st` markDirty tick
is still running.
5. So nowhere will reset the `rootContext.flags`.
6. then in the future, any other `markDirty()` call will not trigger the tick, since
`nothingScheduled` is always false.
So `nothingScheduled` means no tick is scheduled, `rootContext.clean === _CLEAN_PROMISE`
means no tick is running.
So we should set the flags to `rootContext` only when `no tick is scheudled or running`.
PR Close#39316
adds RuntimeError and code enum to improve debugging experience
refactor ExpressionChangedAfterItHasBeenCheckedError to code NG0100
refactor CyclicDependency to code NG0200
refactor No Provider to code NG0201
refactor MultipleComponentsMatch to code NG0300
refactor ExportNotFound to code NG0301
refactor PipeNotFound to code NG0302
refactor BindingNotKnown to code NG0303
refactor NotKnownElement to code NG0304
PR Close#39188
Currently `i18n` attributes are treated the same no matter if they have data bindings or not. This
both generates more code since they have to go through the `ɵɵi18nAttributes` instruction and
prevents the translated attributes from being injected using the `@Attribute` decorator.
These changes makes it so that static translated attributes are treated in the same way as regular
static attributes and all other `i18n` attributes go through the old code path.
Fixes#38231.
PR Close#39408
group together similar error messages as part of error code efforts
ProviderNotFound & NodeInjector grouped into throwProviderNotFoundError
Cyclic dependency errors grouped into throwCyclicDependencyError
PR Close#39251
The `ExpandoInstructions` was unnecessarily convoluted way to solve the
problem of calling the `HostBindingFunction`s on components and
directives. The code was complicated and hard to fallow.
The replacement is a simplified way to achieve the same thing, which
is also more efficient in space and speed.
PR Close#39301
IMPORTANT: `HEADER_OFFSET` should only be refereed to the in the `ɵɵ*` instructions to translate
instruction index into `LView` index. All other indexes should be in the `LView` index space and
there should be no need to refer to `HEADER_OFFSET` anywhere else.
PR Close#39233
- Made `*OpCodes` array branded for safer type checking.
- Simplify `I18NRemoveOpCodes` encoding.
- Broke out `IcuCreateOpCodes` from `I18nMutableOpCodes`.
PR Close#39233
`COMMENT_MARKER` is a generic name which does not make it obvious that
it is used for ICU use case. `ICU_MARKER` is more explicit as it is used
exclusively with ICUs.
PR Close#39233
When looking at `TView` debug template only Element nodes were displayed
as `TNode.Element` was used for both `RElement` and `RText`.
Additionally no text was stored in `TNode.value`. The result was that
the whole template could not be reconstructed. This refactoring creates
`TNodeType.Text` and store the text value in `TNode.value`.
The refactoring also changes `TNodeType` into flag-like structure make
it more efficient to check many different types at once.
PR Close#39233
Before this refactoring/fix the ICU would store the current selected
index in `TView`. This is incorrect, since if ICU is in `ngFor` it will
cause issues in some circumstances. This refactoring properly moves the
state to `LView`.
closes#37021closes#38144closes#38073
PR Close#39233
`TemplateFixture` used to have positional parameters and many tests got
hard to read as number of parameters reach 10+ with many of them `null`.
This refactoring changes `TemplateFixture` to take named parameters
which improves usability and readability in tests.
PR Close#39233
This commit updates micro benchmarks to use relative path to Ivy runtime code. Keeping absolute
locations caused issues with build optimizer that retained certain symbols and they appeared in the
output twice.
PR Close#39142
This commit adds micro benchmarks to run micro benchmarks for i18n-related logic in the
following scenarios:
- i18n static attributes
- i18n attributes with interpolations
- i18n blocks of static text
- i18n blocks of text + interpolations
- simple ICUs
- nested ICUs
First 4 scenarios also have baseline scenarios (non-i18n) so that we can compare i18n perf with
non-i18n logic.
PR Close#39142
This commit updates core tests and removes the code needed to support IE 9 and IE 10 only.
The code is no longer needed since IE 9 and IE 10 support is removed in v11.
PR Close#39090
`NodeInjector` is store in expando as a list of values in an array. The
offset constant into the array have been brought together into a single
`NodeInjectorOffset` enum with better documentation explaining their usage.
PR Close#38707
`TNodeType.View` was created to support inline views. That feature did
not materialize and we have since removed the instructions for it, leave
an unneeded `TNodeType.View` which was still used in a very
inconsistent way. This change no longer created `TNodeType.View` (and
there will be a follow up chang to completely remove it.)
Also simplified the mental model so that `LView[HOST]`/`LView[T_HOST]`
always point to the insertion location of the `LView`.
PR Close#38707
Host `TNode` was passed into `getOrCreateTNode` just so that we can
compute weather or not we are a root node. This was needed because
`previousOrParentTNode` could have `TNode` from `TView` other then
current `TView`. This is confusing mental model. Previous change
ensured that `previousOrParentTNode` must always be part of `TView`,
which enabled this change to remove the unneeded argument.
PR Close#38707
`previousOrParentTNode` stores current `TNode`. Due to inconsistent
implementation the value stored would sometimes belong to the current
`TView` and sometimes to the parent. We have extra logic which accounts
for it. A better solution is to just ensure that `previousOrParentTNode`
always belongs to current `TNode`. This simplifies the mental model
and cleans up some code.
PR Close#38707
This commit updates the code to move generated i18n statements into the `consts` field of
ComponentDef to avoid invoking `$localize` function before component initialization (to better
support runtime translations) and also avoid problems with lazy-loading when i18n defs may not
be present in a chunk where it's referenced.
Prior to this change the i18n statements were generated at the top leve:
```
var I18N_0;
if (typeof ngI18nClosureMode !== "undefined" && ngI18nClosureMode) {
var MSG_X = goog.getMsg(“…”);
I18N_0 = MSG_X;
} else {
I18N_0 = $localize('...');
}
defineComponent({
// ...
template: function App_Template(rf, ctx) {
i0.ɵɵi18n(2, I18N_0);
}
});
```
This commit updates the logic to generate the following code instead:
```
defineComponent({
// ...
consts: function() {
var I18N_0;
if (typeof ngI18nClosureMode !== "undefined" && ngI18nClosureMode) {
var MSG_X = goog.getMsg(“…”);
I18N_0 = MSG_X;
} else {
I18N_0 = $localize('...');
}
return [
I18N_0
];
},
template: function App_Template(rf, ctx) {
i0.ɵɵi18n(2, 0);
}
});
```
Also note that i18n template instructions now refer to the `consts` array using an index
(similar to other template instructions).
PR Close#38404
This commit contains no changes to code. It only breaks `i18n.ts` file
into `i18n.ts` + `i18n_apply.ts` + `i18n_parse.ts` +
`i18n_postprocess.ts` for easier maintenance.
PR Close#38368
The currently selected ICU was incorrectly being stored it `TNode`
rather than in `LView`.
Remove: `TIcuContainerNode.activeCaseIndex`
Add: `LView[TIcu.currentCaseIndex]`
PR Close#38345
This change provides better typing for the `LView.debug` property which
is intended to be used by humans while debugging the application with
`ngDevMode` turned on.
In addition this chang also adds jasmine matchers for better asserting
that `LView` is in the correct state.
PR Close#38359
I18n code breaks up internationalization into opCodes which are then stored
in arrays. To make it easier to debug the codebase this PR adds `debug`
property to the arrays which presents the data in human readable format.
PR Close#38154
Refactors the `ng_rollup_bundle` rule to a macro that relies on
the `@bazel/rollup` package. This means that the rule no longer
deals with custom ESM5 flavour output, but rather only builds
prodmode ES2015 output. This matches the common build output
in Angular projects, and optimizations done in CLI where
ES2015 is the default optimization input.
The motiviation for this change is:
* Not duplicating rollup Bazel rules. Instead leveraging the official
rollup rule.
* Not dealing with a third TS output flavor in Bazel.The ESM5 flavour has the
potential of slowing down local development (as it requires compilation replaying)
* Updating the rule to be aligned with current CLI optimizations.
This also _fixes_ a bug that surfaced in the old rollup bundle rule.
Code that is unused, is not removed properly. The new rule fixes this by
setting the `toplevel` flag. This instructs terser to remove unused
definitions at top-level. This matches the optimization applied in CLI
projects. Notably the CLI doesn't need this flag, as code is always
wrapped by Webpack. Hence, the unused code eliding runs by default.
PR Close#37623
If we detect that an injectable class is inheriting from another injectable, we generate code that looks something like this:
```
const baseFactory = ɵɵgetInheritedFactory(Child);
@Injectable()
class Parent {}
@Injectable()
class Child extends Parent {
static ɵfac = (t) => baseFactory(t || Child)
}
```
This usually works fine, because the `ɵɵgetInheritedFactory` resolves to the factory of `Parent`, but the logic can break down if the `Child` class has a custom decorator. Custom decorators can return a new class that extends the original once, which means that the `ɵɵgetInheritedFactory` call will now resolve to the factory of the `Child`, causing an infinite loop.
These changes fix the issue by changing the inherited factory resolution logic so that it walks up the prototype chain class-by-class, while skipping classes that have the same factory as the class that was passed in.
Fixes#35733.
PR Close#37022
Update docs in the micro benchmarks to include:
* How to run with no turbo inlining
* Where to find the profiles in the DevTools
* Best way to debug benchmarks (using the profile_in_browser rather than --inspect-brk)
PR Close#37140
Previously all static styling information (including the ones from component/directive host bindings) would get merged into a single value before it would be written into the `@Input('class'/'style')`. The new behavior specifically excludes host values from the `@Input` bindings.
Fix#35383
PR Close#35889
In 420b9be1c1 all style-based sanitization code was
disabled because modern browsers no longer allow for javascript expressions within
CSS. This patch is a follow-up patch which removes all traces of style sanitization
code (both instructions and runtime logic) for the `[style]` and `[style.prop]` bindings.
PR Close#36965
This patch is the first of many commits to disable sanitization for
[stlye.prop] and [style] bindings in Angular.
Historically, style-based sanitization has only been required for old
IE browsers (IE6 and IE7). Since Angular does not support these old
browsers at all, there is no reason for the framework to support
style-based sanitization.
PR Close#35621
1. update jasmine to 3.5
2. update @types/jasmine to 3.5
3. update @types/jasminewd2 to 2.0.8
Also fix several cases, the new jasmine 3 will help to create test cases correctly,
such as in the `jasmine 2.x` version, the following case will pass
```
expect(1 == 2);
```
But in jsamine 3, the case will need to be
```
expect(1 == 2).toBeTrue();
```
PR Close#34625
Switches our tslint setup to the standard `tslint.json` linter excludes.
The set of files that need to be linted is specified through a Yarn script.
For IDEs, open files are linted with the closest tslint configuration, if the
tslint IDE extension is set up, and the source file is not excluded.
We cannot use the language service plugin for tslint as we have multiple nested
tsconfig files, and we don't want to add the plugin to each tsconfig. We
could reduce that bloat by just extending from a top-level tsconfig that
defines the language service plugin, but unfortunately the tslint plugin does
not allow the use of tslint configs which are not part of the tsconfig project.
This is problematic since the tslint configuration is at the project root, and we
don't want to copy tslint configurations next to each tsconfig file.
Additionally, linting of `d.ts` files has been re-enabled. This has been
disabled in the past and a TODO has been left. This commit fixes the
lint issues and re-enables linting.
PR Close#35800
`ɵɵNgOnChangesFeature()` would set `ngInherit`, which is a side effect and also not necessary. This was pulled out to module scope so the function itself can be pure. Since it only curries another function, the call is entirely unnecessary. Updated the compiler to only generate a reference to this function, rather than a call to it, and removed the extra curry indirection.
PR Close#35769
This commit updates the host bindings micro benchmark to run tests with mutliple directives (where each directive contains host bindings). The number of directives is configurable as a constant in the micro benchmark file. This change is needed to have an ability to measure/compare perf in different scenarios.
PR Close#35736
This commit adds micro benchmark for host bindings, so that we can assess the impact of changes related to host bindings (for example PR #35568).
PR Close#35705
When a pipe inherits its constructor, and as a result its factory, from an injectable in AOT mode, it can end up throwing an error, because the inject implementation hasn't been set yet. These changes ensure that the implementation is set before the pipe's factory is invoked.
Note that this isn't a problem in JIT mode, because the factory inheritance works slightly differently, hence why this test isn't going through `TestBed`.
Fixes#35277.
PR Close#35468
In View Engine, host element of dynamically created component received attributes and classes extracted from component's selector. For example, if component selector is `[attr] .class`, the `attr` attribute and `.class` class will be add to host element. This commit adds similar logic to Ivy, to make sure this behavior is aligned with View Engine.
PR Close#34481
JoostK
JiaLiPassion
twerske
Kristiyan Kostadinov
Misko Hevery
Andrew Kushnir
Pete Bacon Darwin
Paul Gschwendtner
Joey Perrott
Andrew Scott
Matias Niemelä
Doug Parker