This patch adds support for recovering well-formed (and near-complete)
ASTs for semantically malformed keyed reads and keyed writes. See the
added tests for details on the types of semantics we can now recover;
in particular, notice that some assumptions are made about the form of
a keyed read/write intended by a user. For example, in the malformed
expression `a[1 + = 2`, we assume that the user meant to write a binary
expression for the key of `a`, and assign that key the value `2`. In
particular, we now parse this as `a[1 + <empty expression>] = 2`. There
are some different interpretations that can be made here, but I think
this is reasonable.
The actual changes in the parser code are fairly minimal (a nice
surprise!); the biggest addition is a `writeContext` that marks whether
the `=` operator can serve as a recovery point after error detection.
Part of #38596
PR Close#39004
Updates to rules_nodejs 2.2.0. This is the first major release in 7 months and includes a number of features as well
as breaking changes.
Release notes: https://github.com/bazelbuild/rules_nodejs/releases/tag/2.0.0
Features of note for angular/angular:
* stdout/stderr/exit code capture; this could be potentially be useful
* TypeScript (ts_project); a simpler tsc rule that ts_library that can be used in the repo where ts_library is too
heavy weight
Breaking changes of note for angular/angular:
* loading custom rules from npm packages: `ts_library` is no longer loaded from `@npm_bazel_typescript//:index.bzl`
(which no longer exists) but is now loaded from `@npm//@bazel/typescript:index.bzl`
* with the loading changes above, `load("@npm//:install_bazel_dependencies.bzl", "install_bazel_dependencies")` is
no longer needed in the WORKSPACE which also means that yarn_install does not need to run unless building/testing
a target that depends on @npm. In angular/angular this is a minor improvement as almost everything depends on @npm.
* @angular/bazel package is also updated in this PR to support the new load location; Angular + Bazel users that
require it for ng_package (ng_module is no longer needed in OSS with Angular 10) will need to load from
`@npm//@angular/bazel:index.bzl`. I investigated if it was possible to maintain backward compatability for the old
load location `@npm_angular_bazel` but it is not since the package itself needs to be updated to load from
`@npm//@bazel/typescript:index.bzl` instead of `@npm_bazel_typescript//:index.bzl` as it depends on ts_library
internals for ng_module.
* runfiles.resolve will now throw instead of returning undefined to match behavior of node require
Other changes in angular/angular:
* integration/bazel has been updated to use both ng_module and ts_libary with use_angular_plugin=true.
The latter is the recommended way for rules_nodejs users to compile Angular 10 with Ivy. Bazel + Angular ViewEngine is
supported with @angular/bazel <= 9.0.5 and Angular <= 8. There is still Angular ViewEngine example on rules_nodejs
https://github.com/bazelbuild/rules_nodejs/tree/stable/examples/angular_view_engine on these older versions but users
that want to update to Angular 10 and are on Bazel must switch to Ivy and at that point ts_library with
use_angular_plugin=true is more performant that ng_module. Angular example in rules_nodejs is configured this way
as well: https://github.com/bazelbuild/rules_nodejs/tree/stable/examples/angular. As an aside, we also have an
example of building Angular 10 with architect() rule directly instead of using ts_library with angular plugin:
https://github.com/bazelbuild/rules_nodejs/tree/stable/examples/angular_bazel_architect.
NB: ng_module is still required for angular/angular repository as it still builds ViewEngine & @angular/bazel
also provides the ng_package rule. ng_module can be removed in the future if ViewEngine is no longer needed in
angular repo.
* JSModuleInfo provider added to ng_module. this is for forward compat for future rules_nodejs versions.
@josephperrott, this touches `packages/bazel/src/external.bzl` which will make the sync to g3 non-trivial.
PR Close#37727
This updates the migration to align with the style guide and work with default lint rules. It avoids a lint error on
newly migrated projects and fixes a test in the CLI repo.
PR Close#39070
This commit adds the `AstHost` interface, along with implementations for
both Babel and TS.
It also implements the Babel vesion of the `AstFactory` interface, along
with a linker specific implementation of the `ImportGenerator` interface.
These classes will be used by the new "ng-linker" to transform prelinked
library code using a Babel plugin.
PR Close#38866
The `AstFactory.createFunctionDeclaration()` was allowing `null` to be
passed as the function `name` value. This is not actually possible, since
function declarations must always have a name.
PR Close#38866
The tests were assuming that newlines were `\n` characters but this is not
the case on Windows. This was fixed in #38925, but a better solution is to
configure the TS printer to always use `\n` characters for newlines.
PR Close#38866
In certain circumstances (errors during component constructor) the router outlet may not be activated before
redirecting to a new route. If the new route requires running guards and resolvers the current logic will throw
when accessing outlet.component due to an isActivated check within the property getter. This update brings the
logic inline with deactivateRouterAndItsChildren, namely checking outlet.isActivated before trying to access
outlet.component.
Fixes#39030
PR Close#39049
These free standing functions rely upon the "current" `FileSystem`,
but it is safer to explicitly pass the `FileSystem` into functions or
classes that need it.
Fixes#38711
PR Close#39006
These free standing functions rely upon the "current" `FileSystem`,
but it is safer to explicitly pass the `FileSystem` into functions or
classes that need it.
PR Close#39006
To verify the correctness of the linker output, we leverage the existing
compliance tests. The plan is to test the linker by running all compliance
tests using a full round trip of pre-linking and subsequently post-linking,
where the generated code should be identical to a full AOT compile.
This commit adds an additional Bazel target that runs the compliance
tests in partial mode. Follow-up work is required to implement the logic
for running the linker round trip.
PR Close#38938
This is a precursor to introducing the Angular linker. As an initial
step, a compiler option to configure the compilation mode is introduced.
This option is initially internal until the linker is considered ready.
PR Close#38938
It used to be the case that all microsyntax bindings share the same source
span, so the second bound attribute would overwrite the first.
This has been fixed in #39036, this case is added to prevent regression.
PR Close#39062
Create stubs for getTypeDefinitionAtPosition for both VE and Ivy Language Service implementations.
This will prevent failed requests when it is implemented on the vscode plugin side
PR Close#39050
* Add `templateNode` to `ElementSymbol` and `TemplateSymbol` so callers
can use the information about the attributes on the
`TmplAstElement`/`TmplAstTemplate` for directive matching
* Remove helper function `getSymbolOfVariableDeclaration` and favor
more specific handling for scenarios. The generic function did not
easily handle different scenarios for all types of variable declarations
in the TCB
PR Close#39047
Currently it is impossible to determine the source of a binding that
generates `BoundAttribute` because all bound attributes generated from a
microsyntax expression share the same source span.
For example, in
```html
<div *ngFor="let item of items; trackBy: trackByFn"></div>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
source span for all `BoundAttribute`s generated from microsyntax
```
the `BoundAttribute` for both `ngForOf` and `ngForTrackBy`
share the same source span.
A lot of hacks were necessary in View Engine language service to work
around this limitation. It was done by inspecting the whole source span
then figuring out the relative position of the cursor.
With this change, we introduce a flag to set the binding span as the
source span of the `ParsedProperty` in Ivy AST.
This flag is needed so that we don't have to change VE ASTs.
Note that in the binding parser, we already set `bindingSpan` as the
source span for a `ParsedVariable`, and `keySpan` as the source span for
a literal attribute. This change makes the Ivy AST more consistent by
propagating the binding span to `ParsedProperty` as well.
PR Close#39036
In preparation for the Ivy Language service, add the same properties to AppComponent that appear in
TemplateReference so the inline template can be tested thoroughly.
PR Close#39033
This commit adds an API to `NgCompiler`, a method called
`getComponentsWithTemplateFile`. Given a filesystem path to an external
template file, it retrieves a `Set` (actually a `ReadonlySet`) of component
declarations which are using this template. In most cases, this will only be
a single component.
This information is easily determined by the compiler during analysis, but
is hard for a lot of Angular tooling (e.g. the language service) to infer
independently. Therefore, it makes sense to expose this as a compiler API.
PR Close#39002
Instead of doing all sorts of checks in the `visit()` method, move checks
that are specific to `BoundEvent` to the `visitBoundEvent()` method.
PR Close#38985
Remove @angular/platform-webworker and @angular/platform-webworker-dynamic
as they were deprecated in v8
BREAKING CHANGE: @angular/platform-webworker and @angular/platform-webworker-dynamic
have been removed as they were deprecated in v8
PR Close#38846
With the introduction of incremental type checking in #36211, an
intermediate `ts.Program` for type checking is only created if there are
any templates to check. This rendered some tests ineffective at avoiding
regressions, as the intermediate `ts.Program` was required for the tests
to fail if the scenario under test would not be accounted for. This
commit adds a single component to these tests, to ensure the
intermediate `ts.Program` is in fact created.
PR Close#39011
Prior to this fix, incremental rebuilds could fail to type check due to
missing ambient types from auto-discovered declaration files in @types
directories, or type roots in general. This was caused by the
intermediary `ts.Program` that is created for template type checking,
for which a `ts.CompilerHost` was used which did not implement the
optional `directoryExists` methods. As a result, auto-discovery of types
would not be working correctly, and this would retain into the
`ts.Program` that would be created for an incremental rebuild.
This commit fixes the issue by forcing the custom `ts.CompilerHost` used
for type checking to properly delegate into the original
`ts.CompilerHost`, even for optional methods. This is accomplished using
a base class `DelegatingCompilerHost` which is typed in such a way that
newly introduced `ts.CompilerHost` methods must be accounted for.
Fixes#38979
PR Close#39011
We weren't resolving a path correctly which resulted in an error on Windows.
For reference, here's the error. Note the extra slash before `C:`:
```
Error: ENOENT: no such file or directory, scandir '/C:/bazel_output_root/yxvwd24o/external/npm/node_modules/typescript'
at Object.readdirSync (fs.js:854:3)
```
PR Close#39005
BlacklistedStackFrames to InternalZoneJsStackFrames along with other related
symbols renamed with the same changes (with appropriate casing style).
PR Close#38978
This commit updates the symbols in the TemplateTypeCheck API and methods
for retrieving them:
* Include `isComponent` and `selector` for directives so callers can determine which
attributes on an element map to the matched directives.
* Add a new `TextAttributeSymbol` and return this when requesting a symbol for a `TextAttribute`.
* When requesting a symbol for `PropertyWrite` and `MethodCall`, use the
`nameSpan` to retrieve symbols.
* Add fix to retrieve generic directives attached to elements/templates.
PR Close#38844
`NodeInjector` is store in expando as a list of values in an array. The
offset constant into the array have been brought together into a single
`NodeInjectorOffset` enum with better documentation explaining their usage.
PR Close#38707
This change makes `getPreviousOrParentTNode` return `TNode|null` (rather
than just `TNode`) which is more reflective of the reality. The
`getPreviousOrParentTNode` can be `null` upon entering the `LView`.
PR Close#38707
`TNodeType.View` was created to support inline views. That feature did
not materialize and we have since removed the instructions for it, leave
an unneeded `TNodeType.View` which was still used in a very
inconsistent way. This change no longer created `TNodeType.View` (and
there will be a follow up chang to completely remove it.)
Also simplified the mental model so that `LView[HOST]`/`LView[T_HOST]`
always point to the insertion location of the `LView`.
PR Close#38707
Host `TNode` was passed into `getOrCreateTNode` just so that we can
compute weather or not we are a root node. This was needed because
`previousOrParentTNode` could have `TNode` from `TView` other then
current `TView`. This is confusing mental model. Previous change
ensured that `previousOrParentTNode` must always be part of `TView`,
which enabled this change to remove the unneeded argument.
PR Close#38707
`previousOrParentTNode` stores current `TNode`. Due to inconsistent
implementation the value stored would sometimes belong to the current
`TView` and sometimes to the parent. We have extra logic which accounts
for it. A better solution is to just ensure that `previousOrParentTNode`
always belongs to current `TNode`. This simplifies the mental model
and cleans up some code.
PR Close#38707
Even in the overloads, state that it can accept `null` and
`undefined`, in order to ensure easy composition with `async`.
Additionally, change the implementation to return `null` on an
`undefined` input, for consistency with other pipes.
BREAKING CHANGE:
The `slice` pipe now returns `null` for the `undefined` input value,
which is consistent with the behavior of most pipes. If you rely on
`undefined` being the result in that case, you now need to check for it
explicitly.
PR Close#37447
As shown in the tests, `KeyValuePipe.transform` can accept
`undefined`, in which case it always returns `null`.
Additionally, the typing for `string` keys can be made generic, so the
comparison function is only required to accept the relevant cases.
Finally, the typing for `number` records now shows that the comparison
function and the result entries will actually receive the string version
of the numeric keys, just as shown in the tests.
BREAKING CHANGE:
The typing of the `keyvalue` pipe has been fixed to report that for
input objects that have `number` keys, the result will contain the
string representation of the keys. This was already the case and the
code has simply been updated to reflect this. Please update the
consumers of the pipe output if they were relying on the incorrect
types. Note that this does not affect use cases where the input values
are `Map`s, so if you need to preserve `number`s, this is an effective
way.
PR Close#37447
I18nPluralPipe can actually accept `null` and `undefined` (which are
convenient for composing it with the async pipe), but it is currently
typed to only accept `number`.
PR Close#37447
Make typing of number pipes stricter to catch some misuses (such as
passing an Observable or an array) at compile time.
BREAKING CHANGE:
The signatures of the number pipes now explicitly state which types are
accepted. This should only cause issues in corner cases, as any other
values would result in runtime exceptions.
PR Close#37447
Make typing of DatePipe stricter to catch some misuses (such as passing
an Observable or an array) at compile time.
BREAKING CHANGE:
The signature of the `date` pipe now explicitly states which types are
accepted. This should only cause issues in corner cases, as any other
values would result in runtime exceptions.
PR Close#37447
`AsyncPipe.transform` will never return `undefined`, even when passed
`undefined` in input, in contrast with what was declared in the
overloads.
Additionally the "actual" method signature can be updated to match the
most generic case, since the implementation does not rely on wrappers
anymore.
BREAKING CHANGE:
The async pipe no longer claims to return `undefined` for an input that
was typed as `undefined`. Note that the code actually returned `null` on
`undefined` inputs. In the unlikely case you were relying on this,
please fix the typing of the consumers of the pipe output.
PR Close#37447
The old implementation of case conversion types can handle several
values which are not strings, but the signature did not reflect this.
The new one reports errors when falsy non-string inputs are given to
the pipe (such as `false` or `0`) and has a new signature which
instead reflects the behaviour on `null` and `undefined`.
Fixes#36259
BREAKING CHANGE:
The case conversion pipes no longer let falsy values through. They now
map both `null` and `undefined` to `null` and raise an exception on
invalid input (`0`, `false`, `NaN`) just like most "common pipes". If
your code required falsy values to pass through, you need to handle them
explicitly.
PR Close#37447
For the following example, the cursor is between `keySpan` and `valueSpan`
of the `BoundAttribute`.
```html
<test-cmp [foo]¦="bar"></test-cmp>
```
Our hybrid visitor will return `Element`in this case, which is the parent
node of the `BoundAttribute`.
This is because we only look at the `keySpan` and `valueSpan`, and not
the source span. The last element in the AST path is `Element`, so it gets
returned.
In this PR, I propose fixing this by adding a sentinel value `undefined`
to the AST path to signal that we've found a source span but the cursor is
neither in the key span nor the value span.
PR Close#38995
Now that we have `keySpan` for `BoundAttribute` (implemented in
https://github.com/angular/angular/pull/38898) we could do the same
for `Variable`.
This would allow us to distinguish the LHS and RHS from the whole source
span.
PR Close#38965
ayazhafiz
Andrew Scott
Joey Perrott
Greg Magolan
Doug Parker
Pete Bacon Darwin
Zack Birkenbuel
JoostK
Keen Yee Liau
Dan Russell
Keen Yee Liau
Alex Rickabaugh
JiaLiPassion
Kristiyan Kostadinov
Misko Hevery
Andrea Canciani