`i18nStart` was calling `allocExpando` even if there was 0 new variable created.
This created a new expando instruction with the value 0 which was later interpreted as the start of a new expando block instead of just skipping 0 instructions.
FW-1417 #resolve
PR Close#31451
Fixes Ivy's return value for `DebugNode.context` not being consistent for the case where there is both a structural directive and a component on a node. In `ViewEngine` the instance of the component would be returned, whereas in Ivy the context of the directive is returned.
Also adds a couple of extra test cases for how `DebugNode.context` deals with directives.
This PR resolves FW-1343.
PR Close#31442
Adds a new `elementContainer` instruction that can be used to avoid two instruction (`elementContainerStart` and `elementContainerEnd`) for `ng-container` that has text-only content. This is particularly useful when we have `ng-container` inside i18n sections.
This PR resolves FW-1105.
PR Close#31444
Paths can be mapped directly to files, which was not being taken
into account when computing `basePaths` for the `EntryPointFinder`s.
Now if a `pathMapping` pattern does not exist or is a file, then we try
the containing folder instead.
Fixes#31424
PR Close#30525
Previously, ngcc had to walk the entire `node_modules` tree looking for
entry-points, even if it only needed to process a single target entry-point
and its dependencies.
This added up to a few seconds to each execution of ngcc, which is noticeable
when being run via the CLI integration.
Now, if an entry-point target is provided, only that target and its entry-points
are considered rather than the whole folder tree.
PR Close#30525
When profiling ngcc it is notable that a large amount of time
is spent dealing with an exception that is thrown (and handled
internally by fs) when checking the existence of a file.
We check file existence a lot in both finding entry-points
and when TS is compiling code. This commit adds a simple
cached `FileSystem`, which wraps a real `FileSystem` delegate.
This will reduce the number of calls through to `fs.exists()` and
`fs.readFile()` on the delegate.
Initial benchmarks indicate that the cache is miss to hit ratio
for `exists()` is about 2:1, which means that we save about 1/3
of the calls to `fs.existsSync()`.
Note that this implements a "non-expiring" cache, so it is not suitable
for a long lived `FileSystem`, where files may be modified externally.
The cache will be updated if a file is changed or moved via
calls to `FileSystem` methods but it will not be aware of changes
to the files system from outside the `FileSystem` service.
For ngcc we must create a new `FileSystem` service
for each run of `mainNgcc` and ensure that all file operations
(including TS compilation) use the `FileSystem` service.
This ensures that it is very unlikely that a file will change
externally during `mainNgcc` processing.
PR Close#30525
This message gets called if a format has already been
compiled and we only want the first. So the message itself
is wrong but it is also not very useful anyway.
PR Close#30525
The ngcc tool adds namespaced imports to files when compiling. The ngtsc
tooling was not processing types correctly when they were imported via
such namespaces. For example:
```
export declare class SomeModule {
static withOptions(...): ModuleWithProviders<ɵngcc1.BaseModule>;
```
In this case the `BaseModule` was being incorrectly attributed to coming
from the current module rather than the imported module, represented by
`ɵngcc1`.
Fixes#31342
PR Close#31367
If a package delcares a class internally on an NgModule, ngcc
needs to be able to add a public export to this class's type.
Previously, if the typing file for the declared is not imported
from the typings entry-point file, then ngcc cannot find it.
Now we try to guess the .d.ts files from the equivalent .js
files.
PR Close#31411
This partially reverts some changes from 71b9371180 (diff-dd469785fca8680a5b33b1e81c5cfd91R1420)
These broke the g3sync of zone.js because we use the output of the TypeScript compiler directly, rather than rely on the rollup commonjs plugin to define the global symbol
PR Close#31453
Non-wild-card path-mappings were not being matched correctly.
Further path-mapped secondary entry-points that
were imported from the associated primary entry-point were not
being martched correctly.
Fixes#31274
PR Close#31450
This is needed in g3 where the translation system is sensitive to the full path of the output.
For Bazel users, we don't want this because it would force them to
disable a Bazel option that prevents using the deprecated ctx.new_file
API
PR Close#31410
Adds a schematic and tslint rule that automatically migrate the consumer from `Renderer` to `Renderer2`. Supports:
* Renaming imports.
* Renaming property and method argument types.
* Casting to `Renderer`.
* Mapping all of the methods from the `Renderer` to `Renderer2`.
Note that some of the `Renderer` methods don't map cleanly between renderers. In these cases the migration adds a helper function at the bottom of the file which ensures that we generate valid code with the same return value as before. E.g. here's what the migration for `createText` looks like.
Before:
```
class SomeComponent {
createAndAddText() {
const node = this._renderer.createText(this._element.nativeElement, 'hello');
node.textContent += ' world';
}
}
```
After:
```
class SomeComponent {
createAndAddText() {
const node = __rendererCreateTextHelper(this._renderer, this._element.nativeElement, 'hello');
node.textContent += ' world';
}
}
function __rendererCreateTextHelper(renderer: any, parent: any, value: any) {
const node = renderer.createText(value);
if (parent) {
renderer.appendChild(parent, node);
}
return node;
}
```
This PR resolves FW-1344.
PR Close#30936
Updates the decision made in #31341; this is for the Angular indexer
inside Google. The indexer currently passes (and ngc-wrapped#compile
accepts) a bazel host to use, but because many methods are overwritten
specially for Angular compilation a better approach is to pass an old
bazel compiler host and siphon methods needed off of it before creating
a new host. This enables that.
PR Close#31381
Adds the new `classMapInterpolate1` through `classMapInterpolate8` instructions which handle interpolations inside the `class` attribute and moves the interpolation logic internally. This allows us to remove the `interpolationX` instructions in a follow-up PR.
These changes also add an error if an interpolation is encountered inside a `style` tag (e.g. `style="width: {{value}}"`). Up until now this would actually generate valid instructions, because `styleMap` goes through the same code path as `classMap` which does support interpolation. At runtime, however, `styleMap` would set invalid styles that look like `<div style="0:w;1:i;2:d;3:t;4:h;5::;7:1;">`. In `ViewEngine` interpolations inside `style` weren't supported either, however there we'd output invalid styles like `<div style="unsafe">`, even if the content was trusted.
PR Close#31211
There's no build time dependency from @angular/core to @angular/compiler,
so core can't directly refer to compiler types. To overcome this limitation,
there's a facade layer defined in the compiler and duplicated in core,
such that during runtime all types will correctly align.
There's a testcase in the compiler that verifies that all such facade types
are compatible across core and compiler, such that the core types can't get
misaligned with the actual definitions in the compiler. This suite of
tests were missing the `R3BaseMetadataFacade` facade type, so it was possible
for this type to get out of sync.
PR Close#31210
When a class uses Angular decorators such as `@Input`, `@Output` and
friends without an Angular class decorator, they are compiled into a
static `ngBaseDef` field on the class, with the TypeScript declaration
of the class being altered to declare the `ngBaseDef` field to be of type
`ɵɵBaseDef`. This type however requires a generic type parameter that
corresponds with the type of the class, however the compiler did not
provide this type parameter. As a result, compiling a program where such
invalid `ngBaseDef` declarations are present will result in compilation
errors.
This commit fixes the problem by providing the generic type parameter.
Fixes#31160
PR Close#31210
after update to rules_nodejs 0.32.1, @types are no longer automatically discovered by ngc-wrapped (which uses parts of ts_library) so this test needed updating so that the types files it generates is added as an explicit dep
PR Close#31325
...tsetse now falsely asserting on some lines in a few tests such as packages/core/schematics/test/injectable_pipe_migration_spec.ts.
```
await runMigration();
expect(tree.readContent('/index.ts'))
```
it asserts that "await is required on promise" on the 2nd line when there is no promise there
PR Close#31325
Brings in ts_library fixes required to get angular/angular building after 0.32.0:
typescript: exclude typescript lib declarations in node_module_library transitive_declarations
typescript: remove override of @bazel/tsetse (+1 squashed commit)
@npm//node_modules/foobar:foobar.js labels changed to @npm//:node_modules/foobar/foobar.js with fix for bazelbuild/rules_nodejs#802
also updates to rules_rass commit compatible with rules_nodejs 0.32.0
PR Close#31325
ctx.actions.declare_file now used in @angular/bazel ng_module rule as ctx.new_file is now deprecated. Fixes error:
```
File "ng_module.bzl", line 272, in _expected_outs
ctx.new_file(ctx.genfiles_dir, (ctx.label.name ..."))
Use ctx.actions.declare_file instead of ctx.new_file.
Use --incompatible_new_actions_api=false to temporarily disable this check.
```
This can be worked around with incompatible_new_actions_api flag but may as well fix it proper so downstream doesn't require this flag due to this code.
Also, depset() is no longer iterable by default without a flag. This required fixing in a few spots in @angular/bazel.
fix: foo
PR Close#31325
Some formats of CommonJS put the decorator helper calls
outside the class IIFE as statements on the top level of the
source file.
This commit adds support to the `CommonJSReflectionHost`
for this format.
PR Close#31335
Prior to this commit, host element of a view created via TestBed.createComponent was not attached to the component's host, making it problematic to use TestBed.createComponent API in component factories, which might be used for testing purposes only. This behavior is observed in google3 app tests and was supported by VE, so this commit aligns Ivy and VE.
PR Close#31318
Enable users to pass a custom Bazel CompilerHost to use for an Angular
compilation. This supports users who must override the TypeScript
compiler host.
PR Close#31341
Adds chaining to the `property`, `attribute` and `updateSyntheticHostBinding` instructions when they're used in a host binding.
This PR resolves FW-1404.
PR Close#31296
Without this change when using UrlTree redirects in `urlUpdateStrategy="eager"`, the URL would get updated to the target location, then redirected. This resulted in having an additional entry in the `history` and thus the `back` button would be broken (going back would land on the URL causing a new redirect).
Additionally, there was a bug where the redirect, even without `urlUpdateStrategy="eager"`, could create a history with too many entries. This was due to kicking off a new navigation within the navigation cancelling logic. With this PR the new navigation is pushed to the next tick with a `setTimeout`, allowing the page being redirected from to be cancelled before starting a new navigation.
Related to #27148
PR Close#31168
When `walkTNodeTree` was refactored, the case of ICU expressions was forgotten (because it was handled in the `else` previously).
This PR fixes that to handle it like `ElementContainer`.
FW-1411 #resolve
PR Close#31313
The TS compiler is likely to test paths with extensions and try to
load them as files. Therefore `fileExists()` and methods that rely
on it need to be able to distinguish between real files and directories
that have paths that look like files.
This came up as a bug in ngcc when trying to process `ngx-virtual-scroller`,
which relies upon a library called `@tweenjs/tween.js`.
PR Close#31289
Previously, (presummably due to a typo) the `okToCacheOpaque` argument
of `DataGroup#cacheResponse()` was essentially never taken into account
(since opaque responses have a non-200 status code and thus `res.ok` is
always false).
This commit fixes the typo, which allows opaque responses to be cached
when `okToCacheOpaque` is true (i.e. in data groups using the
`freshness` strategy).
Fixes#30968
PR Close#30977
This commit doesn't change the behavior wrt caching, but it makes it
more explicit that only non-timed-out responses are cached. In case of a
timeout, `res` would be set to a programmatically created 504
`Response`, so `cacheResponse()` (which checks for `res.ok`) would not
have cached it anyway, but this makes change makes it more explicit (and
more similar to the equivalent part in [handleFetchWithFreshness()][1]).
[1]: https://github.com/angular/angular/blob/2b4d5c754/packages/service-worker/worker/src/data.ts#L379-L388
PR Close#30977
Previously, opaque responses where handled a little differently than
other responses from the mock server. More specifically, they were not
tracked (so no assertions could be made for them) and their
[`Body` mixin][1] methods (such as `arrayBuffer()`, `json()`, `text()`)
would throw an error due to `body` being `null`.
This commit ensures opaque responses are also captured on the mock
server and also changes `Body` mixin methods to better simulate the
[spec'd behavior][2].
(These improvements will be necessary to test caching of opaque
responses in a subsequent commit.)
[1]: https://developer.mozilla.org/en-US/docs/Web/API/Body
[2]: https://fetch.spec.whatwg.org/#concept-body-consume-body
PR Close#30977
Currently in Ivy whenever we encounter a new namespace, we set it in the global state so that all subsequent nodes are created under the same namespace. Next time a template is run the namespace will be reset back to HTML.
This breaks down if the last node that was rendered was under the SVG or MathML namespace and we create a component through `ViewContainerRef.create`, because the next template function hasn't run yet and it hasn't had the chance to update the namespace. The result is that the root node of the new component will retain the wrong namespace and may not end up rendering at all (e.g. if we're trying to show a `div` inside the SVG namespace). This issue has the potential to affect a lot of apps, because all components inserted through the router also go through `ViewContainerRef.create`.
PR Close#31232
These files have not been formatted properly, due to issues in the
`gulp format*` tasks. See previous commits (or #31295) for more details.
PR Close#31295
Olivier Combe
crisbeto
George Kalpakas
Pete Bacon Darwin
Alex Eagle
Ayaz Hafiz
Judy Bogart
Michael Prentice
JoostK
Greg Magolan
Alan
Pawel Kozlowski
Andrew Kushnir
Alex Rickabaugh
Jason Aden