To prepare for the optimization of template-only changes, this commit
refactors the `ComponentDecoratorHandler`'s handling of template parsing.
Previously, templates were extracted from the raw decorator metadata and
parsed in a single operation.
To better handle incremental template updates, this commit splits this
operation into a "declaration" step where the template info is extracted
from the decorator metadata, and a "parsing" step where the declared
template is read and parsed. This allows for re-reading and re-parsing of
the declared template at a future point, using the same template declaration
extracted from the decorator.
PR Close#40561
Previously, the incremental flow for NgCompiler was simple: when creating a
new NgCompiler instance, the consumer could pass state from a previous
compilation, which would cause the new compilation to be performed
incrementally. "Local" information about TypeScript files which had not
changed would be passed from the old compilation to the new and reused,
while "global" information would always be recalculated.
However, this flow could be made more efficient in certain cases, such as
when no TypeScript files are changed in a new compilation. In this case,
_all_ information extracted during the first compilation is reusable. Doing
this involves reusing the previous `NgCompiler` instance (the container for
such global information) and updating it, instead of creating a new one for
the next compilation. This approach works cleanly, but complicates the
lifecycle of `NgCompiler`.
To prevent consumers from having to deal with the mechanics of reuse vs
incremental steps of `NgCompiler`, a new `CompilationTicket` mechanism is
added in this commit. Consumers obtain a `CompilationTicket` via one of
several code paths depending on the nature of the incoming compilation, and
use the `CompilationTicket` to obtain an `NgCompiler` instance. This
instance may be a fresh compilation, a new `NgCompiler` for an incremental
compilation, or an existing `NgCompiler` that's been updated to optimally
process a resource-only change. Consumers can use the new `NgCompiler`
without knowledge of its provenance.
PR Close#40561
The Language Service uses the source span of AST nodes to recognize which
node a user has selected, given their cursor position in a template. This is
used to trigger autocompletion.
The previous source span of BindingPipe nodes created a problem when:
1) the pipe binding had no identifier (incomplete or in-progress expression)
2) the user typed trailing whitespace after the pipe character ('|')
For example, the expression `{{foo | }}`. If the cursor preceded the '}' in
that expression, the Language Service was unable to detect that the user was
autocompleting the BindingPipe expression, since the span of the BindingPipe
ended after the '|'.
This commit changes the expression parser to expand the span of BindingPipe
expressions with a missing identifier, to include any trailing whitespace.
This allows the Language Service to correctly recognize this case as
targeting the BindingPipe and complete it successfully. The `nameSpan` of
the BindingPipe is also moved to be right-aligned with the end of any
whitespace present in the pipe binding expression.
This change allows for the disabled test in the Language Service for pipe
completion in this case to be re-enabled.
PR Close#40346
The `LanguageServiceAdapter` must implement `realpath` in order to resolve
symlinks in `node_modules`.
Local libraries are often symlinked in `node_modules` by adding a local
dependency in `package.json`.
Fix https://github.com/angular/vscode-ng-language-service/issues/1083
PR Close#40593
Previously, in `_mismatch()`, the `DefaultIterableDiffer` first checks
`_linkedRecords` for `itemTrackBy`, then checks `_unlinkedRecords`.
This cause the `DefaultIterableDiffer` to move "later" items that match the
`itemTrackBy` from the old collection, rather than using the "earlier" one.
Now we check `_unlinkedRecords` first, so that the `DefaultIterableDiffer`
can give a more stable and reasonable result after diffing. For example,
rather than (`a1` and `a2` have same trackById)
```
a1 b c a2 => b a2 c a1
```
we get
```
a1 b c a2 => b a1 c a2
```
where a1 and a2 retain their original order despite both
having the same track by value.
Fixes#23815
PR Close#23941
Updates to rules_nodejs@2.3.3 to take advantage of windows specific fixes.
rules_nodejs@2.3.3 was created as a patch specifically with a fix for
the issues we found updating to rules_nodejs@2.2.2.
PR Close#40581
Update to the latest version of bazel.
`4.0.0` introduced a breaking change on unnecessary backslashes and these
instance are corrected in this change.
PR Close#40579
This is a follow up fix for
894286dd0c.
It turns out that comments can be closed in several ways:
- `<!-->`
- `<!-- -->`
- `<!-- --!>`
All of the above are valid ways to close comment per:
https://html.spec.whatwg.org/multipage/syntax.html#comments
The new fix surrounds `<` and `>` with zero width space so that it
renders in the same way, but it prevents the comment to be closed eagerly.
PR Close#40525
Previously, we were naïvely checking whether a function name was a partial linker
declaration call by testing the map of linkers with `linkers[name]`. Since
`linkers` was a plain object, it also matched function names like `toString`!
This has been refactored as a `Map` to avoid the problem.
PR Close#40563
This PR adds a way for the language server to retrieve compiler options
diagnostics via `languageService.getCompilerOptionsDiagnostics()`.
This will be used by the language server to show a prompt in the editor if
users don't have `strict` or `fullTemplateTypeCheck` turned on.
Ref https://github.com/angular/vscode-ng-language-service/issues/1053
PR Close#40423
Prior to this commit, the `patchValue()` of the `FormGroup` and `FormArray` classes used to throw an exception
when the `value` argument contained a data structure that has `null` or `undefined` as a value for a field
that represents an instance of `FormGroup` or `FormArray` (for `FormControl` it's not a problem, since it
doesn't have nested controls), since the `patchValue()` method tried to iterate over provided values to
match current data structure.
This commit updates the `patchValue()` logic in `FormGroup` and `FormArray` classes to just ignore `null` and
`undefined` values (without any changes to corresponding `FormGroup` and `FormArray` instances). This
behavior looks inline with the `patchValue()` method goal of "doing its best to match the values to the
correct controls" (quote from docs).
Fixes#36672.
Fixes#21021.
PR Close#40534
PR #39235 introduced additional cleanup logic for form controls and directives. The cleanup logic relies
on the presence of ControlValueAccessor instances on FormControlName and FormControl directives. In general
these fields are present and there are also checks to make sure that the mentioned directive instances are
created with CVAs. However some scenarios (primarily tests) may invoke the logic in a way that the directive
instance would not be fully initialized, thus causing CVA to be absent. As a result, the cleanup logic fails
while trying to call some methods on associated CVA instances.
This commit updates the cleanup logic to take into account the situation when CVA is not present.
Fixes#40521.
PR Close#40526
The ARB format doesn't have a dedicated field for message meaning so these changes include it
as a customize attribute called `x-meaning`.
Fixes#40506.
PR Close#40546
The compliance test runner has various macros that process the
expectation files before actually checking their contents. Among those
macros are i18n helpers, which uses a global message counter to be able
to uniquely identify ICU variables.
Because of the global nature of this message index, it was susceptible
to ordering issues which could result in flaky tests, although it failed
very infrequently.
This commit resets the global message counter before applying the macros.
As a result of this change an expectation file had to be updated; this
is actually a bug fix as said test used to fail if run in isolation (if
`focusTest: true` was set for that particular testcase).
PR Close#40529
When migrating zone.js from gulp to bazel, some legacy build config files are still there,
we have `rollup-es5.config.js` and `rollup-es5_global-es2015.config.js`, since in gulp build
system, build `es5` or `esm` files are set in the config file, but in the bazel world,
the output format is not config in the config.js file, but is required by the downstream
bazel target. So we don't really need the two rollup config files any longer.
Another difference is in `rollup-es5.config.js`, the `external` and `global` libraries names
are also config there, and these settings are also valid for `es2015` build, these settings
are not in the `es2015.config.js` for some legacy reasons. So we don't need to keep this
difference either.
PR Close#40481
This commit reverts commit [_fix(service-worker): handle error with
ErrorHandler_](https://github.com/angular/angular/pull/39990/commits/552419d).
With Angular v11.0.4 and commit [_fix(service-worker): handle error with
ErrorHandler_](https://github.com/angular/angular/pull/39990/commits/552419d)
Angular start to send all service worker registration errors to the Angular
standard `ErrorHandler#handleError()` interface, instead of logging them in the
console.
But users existing `ErrorHandler#handleError()` implementations are not adapted
to service worker registration errors and it might result in broken apps or
bad UI.
Passing to `ErrorHandler` is desirable for some and undesirable for others and
the same is true for passing to `console.error()`.
But `console.error()` was used for a long time and thus it is preferable to keep
it as long as a good solution is not found with `ErrorHandler`.
Right now it's hard to define a good solution for `ErrorHandler` because:
1. Given the nature of the SW registration errors (usually outside the control
of the developer, different error messages on each browser/version, often
quite generic error messages, etc.), passing them to the `ErrorHandler` is
not particularly helpful.
2. While `ErrorHandler#handleError()` accepts an argument of type `any` (so
theoretically we could pass any object without changing the public API), most
apps expect an `Error` instance, so many apps could break if we changed the
shape.
3. Ideally, the Angular community want to re-think the `ErrorHandler` API
and add support for being able to pass additional metadata for each error
(such as the source of the error or some identifier, etc.). This change,
however, could potentially affect many apps out there, so the community must
put some thought into it and design it in a way that accounts for the needs
of all packages (not just the SW).
4. Given that we want to more holistically revisit the `ErrorHandler` API, any
changes we make in the short term to address the issue just for the SW will
make it more difficult/breaky for people to move to a new API in the future.
To see the whole explanation see GitHub PR #40236.
PR Close#40236
This is a follow up fix for
894286dd0c.
It turns out that comments can be closed in several ways:
- `<!-->`
- `<!-- -->`
- `<!-- --!>`
All of the above are valid ways to close comment per:
https://html.spec.whatwg.org/multipage/syntax.html#comments
The new fix surrounds `<` and `>` with zero width space so that it
renders in the same way, but it prevents the comment to be closed eagerly.
PR Close#40525
In `ViewEncapsulation.Emulated` mode, the compiler must generate additional
combinations of selectors to handle the `:host-context()` pseudo-class function.
Previously, when there is was more than one `:host-context()` selector in a
rule, the compiler was generating invalid selectors.
This commit generates all possible combinations of selectors needed to
match the same elements as the native `:host-context()` selector.
Fixes#19199
PR Close#40494
When a source-map has an inline source, any source-map linked from
that source should only be loaded if itself is also inline; it should not
attempt to load a source-map from the file-system. Otherwise we can
find ourselves with inadvertent infinite cyclic dependencies.
For example, if a transpiler takes a file (e.g. index.js) and generates
a new file overwriting the original file - capturing the original
source inline in the new source-map (index.js.map) - the source
file loader might read the inline original file (also index.js) and
then try to load the `index.js.map` file from disk - ad infinitum.
Note that the first call to `loadSourceFile()` is special, since you can
pass in the source-file and source-map contents directly as in-memory
strrngs. This is common if the transpiler has just generated these and has
not yet written them to disk.
When the contents are passed into `loadSourceFile()` directly, they are
not treated as "inline" for the purposes described above since there is
no chance of these "in-memory" source and source-map contents being caught
up in a cyclic dependency.
Fixes#40408
PR Close#40435
This patch adds an API to retrieve the template typecheck block for a
template (if any) at a file location, and a selection of the TS node
in the TCB corresponding to the template node at which the request for
a TCB was made (if any).
Probably not something we want to land soon, but a useful debugging tool
for folks working with TCBs.
PR Close#39974
rxjs was only used within one location within the static queries migration to workaround
a previous limitation that schematics could not directly use a promise. However, promise
support has been available since 8.0. This change removes the observable promise wrapping.
It also removes an any cast that was previously needed to workaround rxjs version mismatches
during compilation.
PR Close#38657
Adds an `appendAll()` method to `HttpParams` that can construct the HTTP
request/response body from an object of parameters and values.
This avoids calling `append()` multiple times when multiple parameters
need to be added.
Fixes#20798
PR Close#20930
For the Google Cloud Console within Google we observed errors in the
shallowEqual function for users in IE and Edge. This patch was made within
Google and the errors went away. This commit upstreams the change into Angular.
PR Close#40488
This commits adds additional expectations to verify that the bloom
filter is able to correctly handle token IDs that exceed the size of
the bloom filter (which is currently 256 bits).
PR Close#40489
The injector system uses a bloom filter to determine if a token is
possibly defined in the node injector tree, which is stored across
multiple bloom buckets that each represent 32 bits of the full 256-bit
wide bloom hash. This means that a computation is required to determine
the exact bloom bucket which is responsible for storing any given 32-bit
interval, which was previously computed using three bitmask operations
and three branches to derive the bloom bucket offset.
This commit exploits the observation that all bits beyond the low 5 bits
of the bloom hash are an accurate representation for the bucket offset,
if shifted right such that those bits become the least significant bits.
This reduces the three bitmask operations and three branches with a
single shift operation, while additionally offering a code size
improvement.
PR Close#40489
Rather than mutating the span on the template when renaming literal strings,
this commit updates the logic to mutate the `TextSpan` equivalent that
is used by the Language Service.
PR Close#40484
Fix a case where matrix parameters weren't stringified when they are passed as a first command
when creating a url tree. Fix return type in parseMatrixParams method
because it always returns {[key: string]: string}
Closes#23165
PR Close#25095
Many `ts.LanguageService` APIs accept a filename, for example
```ts
getQuickInfoAtPosition(fileName: string, position: number)
```
The requirement is that `fileName` is agnostic to the platform (Linux, Mac,
Windows, etc), and is always normalized to TypeScript's internal
`NormalizedPath`.
This is evident from the way these APIs are called from the language server:
```ts
private onHover(params: lsp.TextDocumentPositionParams) {
const lsInfo = this.getLSAndScriptInfo(params.textDocument);
if (lsInfo === undefined) {
return;
}
const {languageService, scriptInfo} = lsInfo;
const offset = lspPositionToTsPosition(scriptInfo, params.position);
const info = languageService.getQuickInfoAtPosition(scriptInfo.fileName, offset);
// ...
}
```
9fca9c6651/server/src/session.ts (L594)
Here `scriptInfo.fileName` is always a `ts.server.NormalizedPath`.
However, https://github.com/angular/angular/pull/39917 accidentally leaked
the platform-specific paths, and caused a mismatch between the incoming paths
and the paths stored in the internal data structure `fileToComponent`.
This PR fixes the bug by always normalizing the paths, and updating the
type to reflect the format of the underlying data.
Fixes https://github.com/angular/vscode-ng-language-service/issues/1063
PR Close#40492
The initial implementation assumed that the consuming editors would
de-duplicate rename locations. In fact, vscode treats overlapping rename
locations as distinct and errors when trying to preview the renames.
This commit updates the language service to de-duplicate exact file+span
matches before returning rename and reference locations.
While vscode _does_ de-duplicate reference results, it still makes sense
to de-duplicate them on our side when possible to make tests more
understandable. If a template has 3 instances of a variable, it makes
sense to get get 3 reference results rather than 4+ with some duplicates.
PR Close#40454
The current "go to definition" is broken for template variables and
references when a template is overridden. This is because we get the
file url from the source span, which uses the overridden name
'override.html'. Instead, we can retrieve the template file from the
compiler in the same manner that is done for references.
Another way to fix this would have been to use the real template file path when
overriding a template, but this was the more straightforward fix since
the strategy was already used in find references and rename locations.
fixes https://github.com/angular/vscode-ng-language-service/issues/1054
PR Close#40455
When a form is reset, it goes through `_forEachChild` to call `reset` on each of its children.
The problem is that if a control is removed while the loop is running (e.g. by a subscription),
the form will throw an error, because it built up the list of available control before the loop
started.
These changes fix the issue by adding a null check before invoing the callback.
Fixes#33401.
PR Close#40462
Close#40215
`fesm2015/zone.js` is built to `esm` bundle with rollup, so the 'use strict';
statement is not generated in the bundle, even we put the 'use strict' in the src code,
rollup removes the code in the final bundle.
So if we load the `fesm2015/zone.js` as a module, such as `ng serve`, in the index.html
```
<script src="polyfills.js" type="module"></script>
```
Everything works fine, since polyfills.js is loaded as `module`, so it is always `strict`.
But in `ng test`, webpack concat the `zone.js` and loaded into the karma html. For other app and
test code, they are still `strict` since they are `module` because they have `export/import`
statement, but `zone.js` is a bundle without `export`, it is a `side effect` bundle, so after
loaded by webpack, it becomes non-strict. Which causes some issues, such as #40215,
the root cause is the `this` context should be `undefined` but treated as `Window` in `non-strict` mode.
```
Object.prototype.toString.apply(undefined);
// should be [object undefined], but it is [object Window] in non-strict mode.
// zone.js patched version of toString
Object.prototype.toString = function() {
...
// in non-strict mode, this is Window
return originalObjectPrototypeToString.call(this);
}
```
So in this commit, `'use strict';` is always added to the `esm` bundles.
PR Close#40456
The `getRenameInfo` action is used by consumers to
1. Determine if a location is a candidate for renames
2. Determine what text to use as the starting point for the rename
PR Close#40439
We should provide the completion when the cursor is in the attribute
name after the `@` and `animate-`, but now the `KeySpan` starts from the
`@` or `animate-`. For example, the animation event `(@name.done)="v"`,
we can know where the cursor is by the `KeySpan` of `name.done` exactly,
it's in the event name or in the phase name.
PR Close#40347
Reasons for change:
- css_parser, css_ast, and css_lexer are not used anywhere and there are
no entry points from compiler.ts
- tested by building Angular and building/running aio with build-local
PR Close#37463
When loading a module that doesn't provide `RouterModule.forChild()` preloader will get stuck
in an infinite loop and throw `ERROR Error: Maximum call stack size exceeded.`
The issue is that child module's `Injector` will look to its parent `Injector` when it doesn't
find any `ROUTES` so it will return routes for it's parent module instead. This will load the
child again that returns its parent's routes and so on.
Closes#29164
PR Close#36605
This commit lays the groundwork for potentially providing rename
locations from the Ivy native LS. The approach is very similar to what
was done with the feature to find references. One difference, however,
is that we did not require the references to be fully "correct". That
is, the exact text spans did not matter so much, as long as we provide a
location that logically includes the referenced item.
An example of a necessary difference between rename locations and references is
directives. The entire element in the template is a "reference" of the
directive's class. However, it's not a valid location to be renamed. The
same goes for aliased inputs/outputs. The locations in the template
directly map to the class property, which is correct for references, but
would not be correct for rename locations, which should instead map to
the string node fo the alias.
As an initial approach to address the aforementioned issues with rename
locations, we check that all the rename location nodes have the same text. If
_any_ node has text that differs from the request, we do not return any
rename locations. This works as a way to prevent renames that could
break the the program by missing some required nodes in the rename action, but
allowing other nodes to be renamed.
PR Close#40140
Because the query now has `flags` which specify the mode, the static query
instruction can now be remove. It is simply normal query with `static` flag.
PR Close#40091
Previous implementation would fire changes `QueryList.changes.subscribe`
whenever the `QueryList` was recomputed. This resulted in artificially
high number of change notifications, as it is possible that recomputing
`QueryList` results in the same list. When the `QueryList` gets recomputed
is an implementation detail and it should not be the thing which determines
how often change event should fire.
This change introduces a new `emitDistinctChangesOnly` option for
`ContentChildren` and `ViewChildren`.
```
export class QueryCompWithStrictChangeEmitParent {
@ContentChildren('foo', {
// This option will become the default in the future
emitDistinctChangesOnly: true,
})
foos!: QueryList<any>;
}
```
PR Close#40091
When using the `NewEntryPointWriter`, we must copy over all files from the
entry-point bundle to the new entry-point. But since we are going to
write out the modified files directly, there is no need to copy those.
This commit skips copying the files that have been modified.
PR Close#40429
Alex Rickabaugh
Keen Yee Liau
Sirui Chen
Joey Perrott
Misko Hevery
Pete Bacon Darwin
Alan Agius
Andrew Kushnir
Kristiyan Kostadinov
JoostK
JiaLiPassion
Hoel IRIS
Jessica Janiuk
ayazhafiz
Charles Lyding
Harun Urhan
Alison Gale
Andrew Scott
Alex Mokin
twerske
ivanwonder
Scott Wang
Martin Sikora
Zach Arend
Alexey Elin