Before ivy it was possible to configure a mutable service value
in an application initializer (by providing an `APP_INITIALIZER`)
that could be read in the provider of `LOCALE_ID`. This is a common
scenario if you wanted to load the locale id asynchronously from
an HTTP request for instance.
When using the ivy, the runtime needs to be told what the current
locale is, which is done by calling the `setLocaleId()` function with
the value injected by the `LOCALE_ID` token. Previously this was
being done before the application initializers were run, which meant
that the `LOCALE_ID` provider was being executed before the
app initializers had a chance to get a new value for it.
Now this initalization of the locale for the ivy runtime is done after the
application initializers have been run.
Closes#34701
PR Close#34830
In `BrowserModule` the value of `LOCALE_ID` is defined in the `APPLICATION_MODULE_PROVIDERS` after `APP_INITIALIZER` has run.
This PR ensures that `LOCALE_ID` is also set for ivy at the same moment which allows the application to fetch the locale from a backend (for example).
Fixes#31465
FW-1436 #resolve
PR Close#31566
Plural ICU expressions depend on the locale (different languages have different plural forms). Until now the locale was hard coded as `en-US`.
For compatibility reasons, if you use ivy with AOT and bootstrap your app with `bootstrapModule` then the `LOCALE_ID` token will be set automatically for ivy, which is then used to get the correct plural form.
If you use JIT, you need to define the `LOCALE_ID` provider on the module that you bootstrap.
For `TestBed` you can use either `configureTestingModule` or `overrideProvider` to define that provider.
If you don't use the compat mode and start your app with `renderComponent` you need to call `ɵsetLocaleId` manually to define the `LOCALE_ID` before bootstrap. We expect this to change once we start adding the new i18n APIs, so don't rely on this function (there's a reason why it's a private export).
PR Close#29249
Plural ICU expressions depend on the locale (different languages have different plural forms). Until now the locale was hard coded as `en-US`.
For compatibility reasons, if you use ivy with AOT and bootstrap your app with `bootstrapModule` then the `LOCALE_ID` token will be set automatically for ivy, which is then used to get the correct plural form.
If you use JIT, you need to define the `LOCALE_ID` provider on the module that you bootstrap.
For `TestBed` you can use either `configureTestingModule` or `overrideProvider` to define that provider.
If you don't use the compat mode and start your app with `renderComponent` you need to call `ɵsetLocaleId` manually to define the `LOCALE_ID` before bootstrap. We expect this to change once we start adding the new i18n APIs, so don't rely on this function (there's a reason why it's a private export).
PR Close#29249
Currently with ViewEngine, if someone runs the platform's
`bootstrapModule` method in order to boostrap a module in
JIT mode, external component resources are properly resolved
*automatically*.
Currently with Ivy, the developer would need to manually call
`resolveComponentResources` in order to asynchronously fetch
the determined external component resources. In order to make
this backwards compatible with ViewEngine, and also since
platforms can already specify a `ResourceLoader` compiler
provider, we need to automatically resolve all external
component resources on module bootstrap.
--
Since the `ResourceLoader` is part of the `@angular/compiler`,
because ViewEngine performed the factory creation in the compiler,
we can't access the `ResourceLoader` token from within core.
In order to workaround this without introducing a breaking change,
we just proxy the `ResourceLoader` token to `core` through the
compiler facade. In the future, we should be able to move the
`ResourceLoader` to core when ViewEngine code no longer exists in
the `@angular/compiler`.
PR Close#29083
Previously, bootstrapping a component with render3 would create a chained injector with the test bed ngModule instead of the ngModule that the component belongs to.
Now when a component belongs to an ngModule, we use that for the chained injector, ensuring the correct injection of any providers that this ngModule contains.
FW-776 #resolve
PR Close#28183
Prior to this commit, we had two different modes for change detection
execution for Ivy, depending on whether you called `bootstrap()` or
`renderComponent()`. In the former case, we would complete creation
mode for all components in the tree before beginning update mode for
any component. In the latter case, we would run creation mode and
update mode together for each component individually.
Maintaining code to support these two different execution orders was
unnecessarily complex, so this commit aligns the two bootstrapping
mechanisms to execute in the same order. Now creation mode always
runs for all components before update mode begins.
This change also simplifies our rendering logic so that we use
`LView` flags as the source of truth for rendering mode instead of
`rf` function arguments. This fixed some related bugs (e.g. calling
`ViewRef.detectChanges` synchronously after the view's creation
would create view nodes twice, view queries would execute twice, etc).
PR Close#27744
When detaching a view by its index via `ViewContainerRef.detach(index)`, in `ViewEngine` we used to return a new `ViewRef` ([for reference](https://github.com/angular/angular/blob/master/packages/core/src/view/refs.ts#L227)), however in Ivy we return the same `ViewRef` which means that its internal `_viewContainerRef` is never reset and we'll throw an error if the consumer tried to attach it to the `ApplicationRef`. These changes return a new `ViewRef` in order to match the original behavior.
These changes also add the same errors as `ViewEngine` when attempting to attach a view that is attached already. This was the original goal of this PR, however it ended up uncovering the issues with the `ViewRef`.
PR Close#27437
Currently we store the `_appRef` when a `ViewRef` is attached, however we don't use it for anything. These changes use it to detach the view from the `ApplicationRef` when it is destroyed. These changes also fix that the `ComponentRef` doesn't remove its `ViewRef` on destroy.
PR Close#27276
All errors for existing fields have been detected and suppressed with a
`!` assertion.
Issue/24571 is tracking proper clean up of those instances.
One-line change required in ivy/compilation.ts, because it appears that
the new syntax causes tsickle emitted node to no longer track their
original sourceFiles.
PR Close#24572
`main()` function used to be needed to support dart, since dart
Does not allow top level statements. Since we no longer use dart
The need for `main()` has been removed.
In preparation for `Basel` and standardized way of running tests
we are removing `main()`
PR Close#21053
Add enough BUILD files to make it possible to
`bazel build packages/core/test`
Also re-format BUILD.bazel files with Buildifier.
Add a CI lint check that they stay formatted.
PR Close#20768
The private classes `ApplicationRef_`, `PlatformRef_`, `JSONPConnection_`, `JSONPBackend_`, `ClientMessageBrokerFactory_`, `ServiceMessageBroker_`, `ClientMessageBroker_` and `ServiceMessageBrokerFactory_` have been removed and merged into their public equivalents.
The size of the minified umd bundles have been slightly decreased:
| package | before | after |
| -------------------|------------|------------|
| core | 217.791 kb | 217.144 kb |
| http | 33.260 kb | 32.838 kb |
| platform-webworker | 56.015 kb | 54.933 kb |
PR Close#19143
In Node.JS console.log/error/warn functions actually resuls in a socket
write which in turn is considered by Zone.js as an async task.
This means that if there is any exception during change detection in a platform-server
application the error handler will make the Angular Zone unstable which
in turn will cause change detection to run on next tick and cause an
infinite loop.
It is also better to run the error handler outside of the Angular Zone
in general on all platforms so that an error in the error handler itself doesn't cause an
infinite loop.
Fixes#17073, #7774.
PR Close#18269
This fixes a flicker when transitioning from server rendered page to client rendered page in lazy loaded routes by waiting for the lazy loaded route to finish loading, assuming initialNavigation on the route is set to 'enabled'.
Fixes#15716
- prevents unsubscribing from the zone on error
- prevents unsubscribing from directive `EventEmitter`s on error
- prevents detaching views in dev mode if there on error
- ensures that `ngOnInit` is only called 1x (also in prod mode)
Fixes#9531Fixes#2413Fixes#15925
ErrorHandler can not throw errors because it will unsubscribe itself from
the error stream.
Zones captures errors and feed it into NgZone, which than has a Rx Observable
to feed it into ErrorHandler. If the ErroHandler throws, then Rx will teardown
the observable which in essence causes the ErrorHandler to be removed from the
error handling. This implies that the ErrorHandler can never throw errors.
Closes#14949Closes#15182Closes#14316
fixes#12869fixes#12889fixes#13885fixes#13870
Before this change there was a single injector tree.
Now we have 2 injector trees, one for the modules and one for the components.
This fixes lazy loading modules.
See the design docs for details:
https://docs.google.com/document/d/1OEUIwc-s69l1o97K0wBd_-Lth5BBxir1KuCRWklTlI4
BREAKING CHANGES
`ComponentFactory.create()` takes an extra optional `NgModuleRef` parameter.
No change should be required in user code as the correct module will be used
when none is provided
DEPRECATIONS
The following methods were used internally and are no more required:
- `RouterOutlet.locationFactoryResolver`
- `RouterOutlet.locationInjector`
The main use case for the generated source maps is to give
errors a meaningful context in terms of the original source
that the user wrote.
Related changes that are included in this commit:
* renamed virtual folders used for jit:
* ng://<module type>/module.ngfactory.js
* ng://<module type>/<comp type>.ngfactory.js
* ng://<module type>/<comp type>.html (for inline templates)
* error logging:
* all errors that happen in templates are logged
from the place of the nearest element.
* instead of logging error messages and stacks separately,
we log the actual error. This is needed so that browsers apply
source maps to the stack correctly.
* error type and error is logged as one log entry.
Note that long-stack-trace zone has a bug that
disables source maps for stack traces,
see https://github.com/angular/zone.js/issues/661.
BREAKING CHANGE:
- DebugNode.source no more returns the source location of a node.
Closes 14013
JiaLiPassion
Joey Perrott
Pete Bacon Darwin
Igor Minar
crisbeto
Nikita Potapenko
Carlos Ortiz García
Kara Erickson
Misko Hevery
Olivier Combe
Alex Rickabaugh
Adam Plumer
Paul Gschwendtner
Pawel Kozlowski
Rado Kirov
Alex Eagle
Vikram Subramanian
vikerman
Tobias Bosch
Christoph Krautz
Victor Berchet
Jason Aden