Currently in Ivy whenever we encounter a new namespace, we set it in the global state so that all subsequent nodes are created under the same namespace. Next time a template is run the namespace will be reset back to HTML.
This breaks down if the last node that was rendered was under the SVG or MathML namespace and we create a component through `ViewContainerRef.create`, because the next template function hasn't run yet and it hasn't had the chance to update the namespace. The result is that the root node of the new component will retain the wrong namespace and may not end up rendering at all (e.g. if we're trying to show a `div` inside the SVG namespace). This issue has the potential to affect a lot of apps, because all components inserted through the router also go through `ViewContainerRef.create`.
PR Close#31232
These files have not been formatted properly, due to issues in the
`gulp format*` tasks. See previous commits (or #31295) for more details.
PR Close#31295
If an entry-point has missing dependencies then it cannot be
processed and is marked as invalid. Similarly, if an entry-point
has dependencies that have been marked as invalid then that
entry-point too is invalid. In all these cases, ngcc should quietly
ignore these entry-points and continue processing what it can.
Previously, if an entry-point had more than one entry-point that
was transitively invalid then ngcc was crashing rather than
ignoring the entry-point.
PR Close#31276
The Angular runtime frequently calls into user code (for example, when
writing to a property binding). Since user code can throw errors, calls to
it are frequently wrapped in a try-finally block. In Ivy, the following
pattern is common:
```typescript
enterView();
try {
callUserCode();
} finally {
leaveView();
}
```
This has a significant problem, however: `leaveView` has a side effect: it
calls any pending lifecycle hooks that might've been scheduled during the
current round of change detection. Generally it's a bad idea to run
lifecycle hooks after the application has crashed. The application is in an
inconsistent state - directives may not be instantiated fully, queries may
not be resolved, bindings may not have been applied, etc. Invariants that
the app code relies upon may not hold. Further crashes or broken behavior
are likely.
Frequently, lifecycle hooks are used to make assertions about these
invariants. When these assertions fail, they will throw and "swallow" the
original error, making debugging of the problem much more difficult.
This commit modifies `leaveView` to understand whether the application is
currently crashing, via a parameter `safeToRunHooks`. This parameter is set
by modifying the above pattern:
```typescript
enterView();
let safeToRunHooks = false;
try {
callUserCode();
safeToRunHooks = true;
} finally {
leaveView(..., safeToRunHooks);
}
```
If `callUserCode` crashes, then `safeToRunHooks` will never be set to `true`
and `leaveView` won't call any further user code. The original error will
then propagate back up the stack and be reported correctly. A test is added
to verify this behavior.
PR Close#31244
Our module resolution prefers `.js` files over `.d.ts` files because
occasionally libraries publish their typings in the same directory
structure as the compiled JS files, i.e. adjacent to each other.
The standard TS module resolution would pick up the typings
file and add that to the `ts.Program` and so they would be
ignored by our analyzers. But we need those JS files, if they
are part of the current package.
But this meant that we also bring in JS files from external
imports from outside the package, which is not desired.
This was happening for the `@fire/storage` enty-point
that was importing the `firebase/storage` path.
In this commit we solve this problem, for the case of imports
coming from a completely different package, by saying that any
file that is outside the package root directory must be an external
import and so we do not analyze those files.
This does not solve the potential problem of imports between
secondary entry-points within a package but so far that does
not appear to be a problem.
PR Close#30591
Rather than passing a number of individual arguments, we can
just pass an `EntryPointBundle`, which already contains them.
This is also a precursor to using more of the properties in the bundle.
PR Close#30591
This will allow users of the `EntryPointBundle` to use some of the `EntryPoint`
properties without us having to pass them around one by one.
PR Close#30591
Previously we expected the constructor parameter `decorators`
property to be an array wrapped in a function. Now we also support
an array not wrapped in a function.
PR Close#30591
Some packages do not actually provide a `typings` field in their
package.json. But TypeScript naturally infers the typings file from
the location of the JavaScript source file.
This commit modifies ngcc to do a similar inference when finding
entry-points to process.
Fixes#28603 (FW-1299)
PR Close#30591
There are scenarios where it is not possible for ngcc to guess the format
or configuration of an entry-point just from the files on disk.
Such scenarios include:
1) Unwanted entry-points: A spurious package.json makes ngcc think
there is an entry-point when there should not be one.
2) Deep-import entry-points: some packages allow deep-imports but do not
provide package.json files to indicate to ngcc that the imported path is
actually an entry-point to be processed.
3) Invalid/missing package.json properties: For example, an entry-point
that does not provide a valid property to a required format.
The configuration is provided by one or more `ngcc.config.js` files:
* If placed at the root of the project, this file can provide configuration
for named packages (and their entry-points) that have been npm installed
into the project.
* If published as part of a package, the file can provide configuration
for entry-points of the package.
The configured of a package at the project level will override any
configuration provided by the package itself.
PR Close#30591
Previously each test relied on large shared mock file-systems, which
makes it difficult to reason about what is actually being tested.
This commit breaks up these big mock file-systems into smaller more
focused chunks.
PR Close#30591
To improve cross platform support, all file access (and path manipulation)
is now done through a well known interface (`FileSystem`).
For testing a number of `MockFileSystem` implementations are provided.
These provide an in-memory file-system which emulates operating systems
like OS/X, Unix and Windows.
The current file system is always available via the static method,
`FileSystem.getFileSystem()`. This is also used by a number of static
methods on `AbsoluteFsPath` and `PathSegment`, to avoid having to pass
`FileSystem` objects around all the time. The result of this is that one
must be careful to ensure that the file-system has been initialized before
using any of these static methods. To prevent this happening accidentally
the current file system always starts out as an instance of `InvalidFileSystem`,
which will throw an error if any of its methods are called.
You can set the current file-system by calling `FileSystem.setFileSystem()`.
During testing you can call the helper function `initMockFileSystem(os)`
which takes a string name of the OS to emulate, and will also monkey-patch
aspects of the TypeScript library to ensure that TS is also using the
current file-system.
Finally there is the `NgtscCompilerHost` to be used for any TypeScript
compilation, which uses a given file-system.
All tests that interact with the file-system should be tested against each
of the mock file-systems. A series of helpers have been provided to support
such tests:
* `runInEachFileSystem()` - wrap your tests in this helper to run all the
wrapped tests in each of the mock file-systems.
* `addTestFilesToFileSystem()` - use this to add files and their contents
to the mock file system for testing.
* `loadTestFilesFromDisk()` - use this to load a mirror image of files on
disk into the in-memory mock file-system.
* `loadFakeCore()` - use this to load a fake version of `@angular/core`
into the mock file-system.
All ngcc and ngtsc source and tests now use this virtual file-system setup.
PR Close#30921
No longer uses docker in order to pull down the toolchain configs
for remote build execution. We don't need to make docker a prerequisite
for working on the Angular repository since we can leverage the checked-in
toolchain configurations from the `@bazel-toolchains` repository.
PR Close#31251
Prior to this commit, the logic to extract query information from class fields used an instance of regular Error class to throw an error. As a result, some useful information (like reference to a specific field) was missing. Replacing Error class with FatalDiagnosticError one makes the error more verbose that should simplify debugging.
PR Close#31123
after update to rules_nodejs 0.32.1, @types are no longer automatically discovered by ngc-wrapped (which uses parts of ts_library) so this test needed updating so that the types files it generates is added as an explicit dep
PR Close#31019
...tsetse now falsely asserting on some lines in a few tests such as packages/core/schematics/test/injectable_pipe_migration_spec.ts.
```
await runMigration();
expect(tree.readContent('/index.ts'))
```
it asserts that "await is required on promise" on the 2nd line when there is no promise there
PR Close#31019
Brings in ts_library fixes required to get angular/angular building after 0.32.0:
typescript: exclude typescript lib declarations in node_module_library transitive_declarations
typescript: remove override of @bazel/tsetse (+1 squashed commit)
@npm//node_modules/foobar:foobar.js labels changed to @npm//:node_modules/foobar/foobar.js with fix for bazelbuild/rules_nodejs#802
also updates to rules_rass commit compatible with rules_nodejs 0.32.0
PR Close#31019
ctx.actions.declare_file now used in @angular/bazel ng_module rule as ctx.new_file is now deprecated. Fixes error:
```
File "ng_module.bzl", line 272, in _expected_outs
ctx.new_file(ctx.genfiles_dir, (ctx.label.name ..."))
Use ctx.actions.declare_file instead of ctx.new_file.
Use --incompatible_new_actions_api=false to temporarily disable this check.
```
This can be worked around with incompatible_new_actions_api flag but may as well fix it proper so downstream doesn't require this flag due to this code.
Also, depset() is no longer iterable by default without a flag. This required fixing in a few spots in @angular/bazel.
fix: foo
PR Close#31019
Add an IndexingContext class to store indexing information and a
transformer module to generate indexing analysis. Integrate the indexing
module with the rest of NgtscProgram and add integration tests.
Closes#30959
PR Close#31151
Previously, the usage of equality operators ==, ===, != and !== was not
supported in ngtsc's static interpreter. This commit adds support for
such operators and includes tests.
Fixes#31076
PR Close#31145
Since Angular v8, and commit b3dda0e, `parseUrl()` can be called without
`relativeTo`, thus `new URL()` can be called with `relativeTo = undefined`.
Safari does not like it and the service worker registration fails:
```js
new URL('https://angular.io/') // OK
new URL('https://angular.io/', undefined) // TypeError
```
Closes#31061
PR Close#31140
Under Bazel, we don't yet support Stylus and Less, and thus we should not offer the users to generate applications which are known not to work.
Closes#31209
PR Close#31234
In ViewEngine injecting a Renderer2 returns a renderer that is specific to the particular component, however in Ivy we inject the renderer for the parent view instead. This causes it to set incorrect `ngcontent` attributes when creating elements through the renderer.
The issue comes from the fact that the `Renderer2` is created according to the current `LView`, but because DI happens before we've entered the `LView` of the component that's injecting the renderer, we end up with one that's one level up. We work around the issue by finding the `LView` that corresponds to the `previousOrParentTNode` inside of the parent view and associating the `Renderer2` with it.
This PR resolves FW-1382.
PR Close#31063
Change the Element constructor in r3_ast to create a new ParseSourceSpan when regenerating it rather than extending an object, which does not contain the overloaded toString().
PR Close#31190
Previously, multiple ViewContainerRef instances (obtained by injecting
ViewContainerRef multiple times) each had private state that could be out of
sync with actual LContainer, if views were inserted/removed/queried across
the different instances. In particular each instance had its own array which
tracked ViewRefs inserted via that instance.
This commit moves the ViewRefs array onto the LContainer itself, so that it
can be shared across multiple ViewContainerRef instances. A test is added
that verifies ViewContainerRefs now provide a consistent view of the
container.
FW-1377 #resolve
PR Close#30985
Optimizations to skip compiling source files that had not changed
did not account for the case where only a resource file changes,
such as an external template or style file.
Now we track such dependencies and trigger a recompilation
if any of the previously tracked resources have changed.
This will require a change on the CLI side to provide the list of
resource files that changed to trigger the current compilation by
implementing `CompilerHost.getModifiedResourceFiles()`.
Closes#30947
PR Close#30954
Kristiyan Kostadinov
George Kalpakas
Pete Bacon Darwin
Alex Rickabaugh
Pawel Kozlowski
Misko Hevery
Umair Sarfraz
Olivier Combe
Paul Gschwendtner
Andrew Kushnir
Santosh Yadav
Greg Magolan
Alan Agius
Ayaz Hafiz
JoostK
Hoel IRIS
Judy Bogart
JiaLiPassion