Some specialised browsers that do not support scroll restoration
(e.g. some web crawlers) do not allow `scrollRestoration` to be
writable.
We already sniff the browser to see if it has the `window.scrollTo`
method, so now we also check whether `window.history.scrollRestoration`
is writable too.
Fixes#30629
PR Close#30630
Date pipe is giving wrong week number when used with the date format 'w'. If first week(according to Iso) has some days in previous year
Fixes#33961
PR Close#37632
Use the strongly typed TestBed.inject rather than the weakly typed inject test utility function. Reuse injected dependency variables between sibling test cases.
PR Close#37459
`AsyncPipe` only uses `WrappedValue` when the latest value from the `Promise` or `Observable` is different from the previous one. This is already enough to trigger change detection so the `WrappedValue` is not necessary.
Fixes#29927
BREAKING CHANGE:
This change could result in ExpressionChangedAfterItHasBeenChecked errors that
were not detected before. The error could previously have gone undetected
because two WrappedValues are considered "equal" in all cases for the purposes
of the check, even if their respective unwrapped values are not.
Additionally, `[val]=(observable | async).someProperty` will no longer
trigger change detection if the value of `someProperty` is identical to
the value in the previous emit. If you need to force change detection,
either update the binding to use an object whose reference changes or
subscribe to the observable and call markForCheck as needed.
PR Close#36633
When formatting a time with the `b` or `B` format codes, the rendered
string was not correctly handling day periods that spanned midnight.
Instead the logic was falling back to the default case of `AM`.
Now the logic has been updated so that it matches times that are within
a day period that spans midnight, so it will now render the correct
output, such as `at night` in the case of English.
Applications that are using either `formatDate()` or `DatePipe` and any
of the `b` or `B` format codes will be affected by this change.
Fixes#36566
PR Close#36611
`KeyValuePipe` currently accepts `null` values as well as `Map`s and a
few others. However, due to the way in which TS overloads work, a type
of `T|null` will not be accepted by `KeyValuePipe`'s signatures, even
though both `T` and `null` individually would be.
To make this work, each signature that accepts some type `T` has been
duplicated with a second one below it that accepts a `T|null` and
includes `null` in its return type.
Fixes#35743
PR Close#36093
NOTE: This change must be reverted with previous deletes so that it code remains in build-able state.
This change deletes old styling code and replaces it with a simplified styling algorithm.
The mental model for the new algorithm is:
- Create a linked list of styling bindings in the order of priority. All styling bindings ere executed in compiled order and than a linked list of bindings is created in priority order.
- Flush the style bindings at the end of `advance()` instruction. This implies that there are two flush events. One at the end of template `advance` instruction in the template. Second one at the end of `hostBindings` `advance` instruction when processing host bindings (if any).
- Each binding instructions effectively updates the string to represent the string at that location. Because most of the bindings are additive, this is a cheap strategy in most cases. In rare cases the strategy requires removing tokens from the styling up to this point. (We expect that to be rare case)S Because, the bindings are presorted in the order of priority, it is safe to resume the processing of the concatenated string from the last change binding.
PR Close#34616
This change reverts https://github.com/angular/angular/pull/28711
NOTE: This change deletes code and creates a BROKEN SHA. If reverting this SHA needs to be reverted with the next SHA to get back into a valid state.
The change removes the fact that `NgStyle`/`NgClass` is special and colaborates with the `[style]`/`[class]` to merge its styles. By reverting to old behavior we have better backwards compatiblity since it is no longer treated special and simply overwrites the styles (same as VE)
PR Close#34616
Since I was learning the codebase and had a hard time understanding what was going on I've done a
bunch of changes in one commit that under normal circumstances should have been split into several
commits. Because this code is likely going to be overwritten with Misko's changes I'm not going to
spend the time with trying to split this up.
Overall I've done the following:
- I processed review feedback from #34307
- I did a bunch of renaming to make the code easier to understand
- I refactored some internal functions that were either inefficient or hard to read
- I also updated lots of type signatures to correct them and to remove many casts in the code
PR Close#34307
Prior to this change, in Ivy mode ngStyle/ngClass would accidentally emit value changes for static
(string-based) values even if the value itself had not changed. This patch ensures that
the style/class diffing code is more strict and when it signals ngClass/ngStyle that there has been
a value change.
Fixes#34336, #34444
PR Close#34307
The major one that affects the angular repo is the removal of the bootstrap attribute in nodejs_binary, nodejs_test and jasmine_node_test in favor of using templated_args --node_options=--require=/path/to/script. The side-effect of this is that the bootstrap script does not get the require.resolve patches with explicitly loading the targets _loader.js file.
PR Close#34736
Default currency code in CurrencyPipe is currently hardcoded to USD
and is not configurable. This commit allows the default currency code
to be configurable by adding a DEFAULT_CURRENCY_CODE injection token.
Example:
```
providers: [{ provide: DEFAULT_CURRENCY_CODE, useValue: "GBP" }]
...
{{ 123.45 | currency }} // outputs £123.45 as opposed to always $123.45 before
```
Closes: #25461
PR Close#32584
The major one that affects the angular repo is the removal of the bootstrap attribute in nodejs_binary, nodejs_test and jasmine_node_test in favor of using templated_args --node_options=--require=/path/to/script. The side-effect of this is that the bootstrap script does not get the require.resolve patches with explicitly loading the targets _loader.js file.
PR Close#34589
Prior to ivy, undefined values passed in an object to the
ngStyle directive were ignored. Restore this behavior by
ignoring keys that point to undefined values.
closes#34310
PR Close#34422
Currently we only run Saucelabs on PRs using the legacy View Engine
build. Switching that build to Ivy is not trivial and there are various
options:
1. Updating the R3 switches to use POST_R3 by default. At first glance,
this doesn't look easy because the current ngtsc switch logic seems to
be unidirectional (only PRE_R3 to POST_R3).
2. Updating the legacy setup to run with Ivy. This sounds like the easiest
solution at first.. but it turns out to be way more complicated. Packages
would need to be built with ngtsc using legacy tools (i.e. first building
the compiler-cli; and then building packages) and View Engine only tests
would need to be determined and filtered out. Basically it will result in
re-auditing all test targets. This is contradictory to the fact that we have
this information in Bazel already.
3. Creating a new job that runs tests on Saucelabs with Bazel. We specify
fine-grained test targets that should run. This would be a good start
(e.g. acceptance tests) and also would mean that we do not continue maintaining
the legacy setup..
This commit implements the third option as it allows us to move forward
with the general Bazel migration. We don't want to spend too much time
on our legacy setup since it will be removed anyway in the future.
PR Close#34277
This is a breaking change in nodejs rules 0.40.0 as part of the API review & cleanup for the 1.0 release. Their APIs are identical as ts_web_test was just karma_web_test without the config_file attribute.
PR Close#33802
To limit the exposure of the private `LOCALE_DATA` from outside
`@angular/core` this commit exposes private functions in the core
to hide the internal structures better.
* The `registerLocaleData()` implementation has moved from
`@angular/common` to `@angular/core`. A stub that delegates to
core has been left in common for backward compatibility.
* A new `ɵunregisterLocaleData()` function has been provided,
which is particularly useful in tests to clear out registered locales
to prevent subsequent tests from being affected.
* A private export of `ɵregisterLocaleData()` has been removed
from `@angular/common`. This was not being used and is accessible
via `@angular/core` anyway.
PR Close#33523
BREAKING CHANGE:
In v5, we deprecated support for the intl API in order to improve the browser support. We are now removing these deprecated APIs for v9. See the original change here for more info on why: #18284.
PR Close#29250
Fixes an error that is thrown by `ngTemplateOutlet` under Ivy when switching from a template to null and back to a template. The error is thrown because the reference to the previous ViewRef is never cleared and the directive tries to detach a view that has already been detached.
Fixes#32060.
PR Close#32160
In `BrowserModule` the value of `LOCALE_ID` is defined in the `APPLICATION_MODULE_PROVIDERS` after `APP_INITIALIZER` has run.
This PR ensures that `LOCALE_ID` is also set for ivy at the same moment which allows the application to fetch the locale from a backend (for example).
Fixes#31465
FW-1436 #resolve
PR Close#31566
Fixes all TypeScript failures caused by enabling the `--strict`
flag for test source files. We also want to enable the strict
options for tests as the strictness enforcement improves the
overall codehealth, unveiled common issues and additionally it
allows us to enable `strict` in the `tsconfig.json` that is picked
up by IDE's.
PR Close#30993
Fixes Ivy throwing an error if it runs into an empty property binding on an `ng-template` (e.g. `<ng-template [something]=""></ng-template>`) by not generating an update instruction for it.
Fixes#30801.
This PR resoves FW-1356.
PR Close#30829
Plural ICU expressions depend on the locale (different languages have different plural forms). Until now the locale was hard coded as `en-US`.
For compatibility reasons, if you use ivy with AOT and bootstrap your app with `bootstrapModule` then the `LOCALE_ID` token will be set automatically for ivy, which is then used to get the correct plural form.
If you use JIT, you need to define the `LOCALE_ID` provider on the module that you bootstrap.
For `TestBed` you can use either `configureTestingModule` or `overrideProvider` to define that provider.
If you don't use the compat mode and start your app with `renderComponent` you need to call `ɵsetLocaleId` manually to define the `LOCALE_ID` before bootstrap. We expect this to change once we start adding the new i18n APIs, so don't rely on this function (there's a reason why it's a private export).
PR Close#29249
Adds overloads to the `transform` methods of `SlicePipe`,
to have better types than `any` for `value` and `any` as a return.
With this commit, using `slice` in an `ngFor` still allow to type-check the content of the `ngFor`
with `fullTemplateTypeCheck` enabled in Ivy:
<div *ngFor="let user of users | slice:0:2">{{ user.typo }}</div>
|
`typo` does not exist on type `UserModel`
whereas it is currently not catched (as the return of `slice` is `any`) neither in VE nor in Ivy.
BREAKING CHANGE
`SlicePipe` now only accepts an array of values, a string, null or undefined.
This was already the case in practice, and it still throws at runtime if another type is given.
But it is now a compilation error to try to call it with an unsupported type.
PR Close#30156
This commit provides a replacement for `$location`. The new service is written in Angular, and can be consumed into existing applications by using the downgraded version
of the provider.
Prior to this addition, applications upgrading from AngularJS to Angular could get into a situation where AngularJS wanted to control the URL, and would often parse or se
rialize the URL in a different way than Angular. Additionally, AngularJS was alerted to URL changes only through the `$digest` cycle. This provided a buggy feedback loop
from Angular to AngularJS.
With this new `LocationUpgradeProvider`, the `$location` methods and events are provided in Angular, and use Angular APIs to make updates to the URL. Additionally, change
s to the URL made by other parts of the Angular framework (such as the Router) will be listened for and will cause events to fire in AngularJS, but will no longer attempt
to update the URL (since it was already updated by the Angular framework).
This centralizes URL reads and writes to Angular and should help provide an easier path to upgrading AngularJS applications to Angular.
PR Close#30055
This feature adds an `onUrlChange` to Angular's `Location` class. This is useful to track all updates coming from anywhere in the framework. Without this method, it's difficult (or impossible) to track updates run through `location.go()` or `location.replaceState()` as the browser doesn't publish events when `history.pushState()` or `.replaceState()` are run.
PR Close#30055
marcvincenti
JiaLiPassion
Ajit Singh
Lars Gyrup Brink Nielsen
Joey Perrott
Andrew Scott
Pete Bacon Darwin
JoostK
Keen Yee Liau
Miško Hevery
Paul Gschwendtner
Igor Minar
Matias Niemelä
Greg Magolan
Hayouung
atscott
Troels Lenda
Michael Nahkies
Feliks Khantsis
Danny Skoog
Joey Perrott
Olivier Combe
Carlos Ortiz García
Kara Erickson
Kristiyan Kostadinov
cexbrayat
Jason Aden