Accounts for schemas in when validating properties in Ivy.
This PR resolves FW-819.
A couple of notes:
* I had to rework the test slightly, in order to have it fail when we expect it to. The one in master is passing since Ivy's validation runs during the update phase, rather than creation.
* I had to deviate from the design in FW-819 and not add an `enableSchema` instruction, because the schema is part of the `NgModule` scope, however the scope is only assigned to a component once all of the module's declarations have been resolved and some of them can be async. Instead, I opted to have the `schemas` on the component definition.
PR Close#28637
Since we build and publish the individual packages
using Bazel and `build.sh` has been removed, we can
safely remove the `rollup.config.js` files which are no
longer needed because the `ng_package` bazel rule
automatically handles the rollup settings and globals.
PR Close#28646
Currently errors thrown inside event handler in Ivy are caught and forwarded to the `ErrorHandler`, however this means that if they happen during a unit test, the test won't fail. These changes add a test-specific `ErrorHandler` that throws the error rather than logging it out.
PR Close#28707
Previously `DebugNode.classes` and `DebugNode.styles` mistakenly used an
object that is only *sometimes* a `StylingContext`. Also fixes a mistake
in `debug_node_spec.ts` where a test component was not declared in the
testing module.
There is still a bug here where `DebugNode` is not exposing *static*
values. This will need to be fixed in a follow up.
PR Close#28709
Prior to this fix if a root component was instantiated it create host
bindings, but never render them once update mode ran unless one or more
slot-allocated bindings were issued. Since styling in Ivy does not make
use of LView slots, the host bindings function never ran on the root
component.
This fix ensures that the `hostBindings` function does run for a root
component and also renders the schedlued styling instructions when
executed.
Jira Issue: FW-1062
PR Close#28664
Under Bazel, some compilerOptions in tsconfig.json are controlled by
downstream rules. The default tsconfig.json causes Bazel to print out
warnings about overriden settings.
This commit makes a backup of the original tsconfig.json and removes
tsconfig settings that are controlled by Bazel.
As part of this fix, JsonAst utils are refactored into separate package
and unit tests are added.
PR closes https://github.com/angular/angular/issues/28034
PR Close#28674
BREAKING CHANGE
Previous to this change, when a control was reset, value and status change
events would be emitted before the control was reset to pristine. As a
result, if one were to check a control's pristine state in a valueChange
listener, it would appear that the control was still dirty after reset.
This change delays emission of value and status change events until after
controls have been marked pristine. This means the pristine state will be
reset as expected if one checks in a listener.
Theoretically, there could be applications depending on checking whether a
control *used to be dirty*, so this is marked as breaking. In these cases,
apps should cache the state on the app side before calling reset.
Fixes#28130
PR Close#28395
This enabled dts flattening in the final distrubutable package.
Notes:
- For the time being this is an opt-in feature via the `ng_module` attribute `bundle_dts`, however in the near future this will be turned on by default.
- This only supports the legacy compiler `ngc`, as `ngtsc` emits namespaced imports `import * as __` from local modules which is not supported for the time being by API Extractor. See: https://github.com/Microsoft/web-build-tools/issues/1029
Ref: TOOL-611
PR Close#28588
The ultimate goal of this commit is to make use of fileNameToModuleName to
get the module specifier to use when generating an import, when that API is
available in the CompilerHost that ngtsc is created with.
As part of getting there, the way in which ngtsc tracks references and
generates import module specifiers is refactored considerably. References
are tracked with the Reference class, and previously ngtsc had several
different kinds of Reference. An AbsoluteReference represented a declaration
which needed to be imported via an absolute module specifier tracked in the
AbsoluteReference, and a RelativeReference represented a declaration from
the local program, imported via relative path or referred to directly by
identifier if possible. Thus, how to refer to a particular declaration was
encoded into the Reference type _at the time of creation of the Reference_.
This commit refactors that logic and reduces Reference to a single class
with no subclasses. A Reference represents a node being referenced, plus
context about how the node was located. This context includes a
"bestGuessOwningModule", the compiler's best guess at which absolute
module specifier has defined this reference. For example, if the compiler
arrives at the declaration of CommonModule via an import to @angular/common,
then any references obtained from CommonModule (e.g. NgIf) will also be
considered to be owned by @angular/common.
A ReferenceEmitter class and accompanying ReferenceEmitStrategy interface
are introduced. To produce an Expression referring to a given Reference'd
node, the ReferenceEmitter consults a sequence of ReferenceEmitStrategy
implementations.
Several different strategies are defined:
- LocalIdentifierStrategy: use local ts.Identifiers if available.
- AbsoluteModuleStrategy: if the Reference has a bestGuessOwningModule,
import the node via an absolute import from that module specifier.
- LogicalProjectStrategy: if the Reference is in the logical project
(is under the project rootDirs), import the node via a relative import.
- FileToModuleStrategy: use a FileToModuleHost to generate the module
specifier by which to import the node.
Depending on the availability of fileNameToModuleName in the CompilerHost,
then, a different collection of these strategies is used for compilation.
PR Close#28523
This commit introduces a new ngtsc sub-library, 'path', which contains
branded string types for the different kind of paths that ngtsc manipulates.
Having static types for these paths will reduce the number of path-related
bugs (especially on Windows) and will eliminate unnecessary defensive
normalizing.
See the README.md file for more detail.
PR Close#28523
Previously, ngtsc would throw an error if two decorators were matched on
the same class simultaneously. However, @Injectable is a special case, and
it appears frequently on component, directive, and pipe classes. For pipes
in particular, it's a common pattern to treat the pipe class also as an
injectable service.
ngtsc actually lacked the capability to compile multiple matching
decorators on a class, so this commit adds support for that. Decorator
handlers (and thus the decorators they match) are classified into three
categories: PRIMARY, SHARED, and WEAK.
PRIMARY handlers compile decorators that cannot coexist with other primary
decorators. The handlers for Component, Directive, Pipe, and NgModule are
marked as PRIMARY. A class may only have one decorator from this group.
SHARED handlers compile decorators that can coexist with others. Injectable
is the only decorator in this category, meaning it's valid to put an
@Injectable decorator on a previously decorated class.
WEAK handlers behave like SHARED, but are dropped if any non-WEAK handler
matches a class. The handler which compiles ngBaseDef is WEAK, since
ngBaseDef is only needed if a class doesn't otherwise have a decorator.
Tests are added to validate that @Injectable can coexist with the other
decorators and that an error is generated when mixing the primaries.
PR Close#28523
In the past, @Injectable had no side effects and existing Angular code is
therefore littered with @Injectable usage on classes which are not intended
to be injected.
A common example is:
@Injectable()
class Foo {
constructor(private notInjectable: string) {}
}
and somewhere else:
providers: [{provide: Foo, useFactory: ...})
Here, there is no need for Foo to be injectable - indeed, it's impossible
for the DI system to create an instance of it, as it has a non-injectable
constructor. The provider configures a factory for the DI system to be
able to create instances of Foo.
Adding @Injectable in Ivy signifies that the class's own constructor, and
not a provider, determines how the class will be created.
This commit adds logic to compile classes which are marked with @Injectable
but are otherwise not injectable, and create an ngInjectableDef field with
a factory function that throws an error. This way, existing code in the wild
continues to compile, but if someone attempts to use the injectable it will
fail with a useful error message.
In the case where strictInjectionParameters is set to true, a compile-time
error is thrown instead of the runtime error, as ngtsc has enough
information to determine when injection couldn't possibly be valid.
PR Close#28523
Translation of WriteKeyExpr expressions was not implemented in the ngtsc
expression translator. This resulted in binding expressions like
"target[key] = $event" not compiling.
This commit fixes the bug by implementing WriteKeyExpr translation.
PR Close#28523
Some applications use enum values in their host bindings:
@Component({
host: {
'[prop]': EnumType.Key,
}, ...
})
This commit changes the resolution of host properties to follow the enum
declaration and extract the correct value for the binding.
PR Close#28523
Testing of Ivy revealed two bugs in the AstMemoryEfficientTransformer
class, a part of existing View Engine compiler infrastructure that's
reused in Ivy. These bugs cause AST expressions not to be transformed
under certain circumstances.
The fix is simple, and tests are added to ensure the specific expression
forms that trigger the issue compile properly under Ivy.
PR Close#28523
* Updates the instructions on how to run the benchmark tests.
* Removes the unused `favicon.ico` file and the corresponding Bazel filegroup
PR Close#28645
While marking a given views tree as dirty we should go all the way to the
root of the views tree and cross boundaries of dynamically inserted views.
In other words the markForCheck functionality should consider parents of
dynamically inserted views.
PR Close#28687
Prior to this change we used current injector implementation for module injector, which was causing problems and produces circular dependencies in case the same token is referenced (with @SkipSelf flag) in the `deps` array. The origin of the problem was that once `directiveInject` implementation becomes active, it was used for module injector as well, thus searching deps in Component/Directive DI scope. This fix sets `injectInjectorOnly` implementation for module injector to resolve the problem.
PR Close#28667
The web_worker images example is currently not really usable
because the rendered button that can be used to upload
an "image" to the demo is currently not working. This is because
the HTML markup for the `file-field` is not matching what `materialize-css`
expects. See: https://materializecss.com/text-inputs.html
PR Close#28562
Currently all playground examples are built with NGC, and most
of the HTML resources are automatically inlined. Surprisingly NGC
is able to resolve the relative component assets even though these
aren't specified in the `assets`. This seems to work because NGC
resolves the files in the execroot where the files are present
(if Bazel doesn't use sandboxing).
Issue is tracked with TOOL-667
PR Close#28562
The `web_workers/images` example is not being tested by any e2e
spec and therefore it's technically not necessary to fix that it uses
external resources, though in order to ensure that the Bazel builds
are hermetic and that we can eventually add e2e specs for the
web_worker/image example, we should avoid any use of external
resources.
We remove the `web-animations` polyfill in the `web_workers/animations`
example because we should try to vendor as few as possible deps. Also
the animations API is already supported by browsers we run the e2e tests
against (note here: `web_workers/animations` is currently also disabled)
PR Close#28562
Prior to this update we had separate contentQueries and contentQueriesRefresh functions to handle creation and update phases. This approach was inconsistent with View Queries, Host Bindings and Template functions that we generate for Component/Directive defs. Now the mentioned 2 functions are combines into one (contentQueries), creation and update logic is separated with RenderFlags (similar to what we have in other generated functions).
PR Close#28503
This commit fixes a bug whereby recompilation occurs every time `yarn ng build`
or `yarn bazel build ...` is invoked.
This is a temporary solution until # https://github.com/bazelbuild/bazel/issues/7026
is fixed.
PR Close#28675
`multi_sass_binary` rules is reinstated in rules_sass v1.17.0
and it is a better solution than list comprehension currently used
because it handles imports correctly.
PR Close#28669
Vani
Kristiyan Kostadinov
Paul Gschwendtner
Jeremy Elbourn
Matias Niemelä
George Kalpakas
Keen Yee Liau
Greg Magolan
Pawel Kozlowski
Artem Lanovyy
Alex Eagle
Alan Agius
Marc Laval
Alberto Garza
Alex Rickabaugh
Trotyl Yu
Andrew Kushnir
Kapunahele Wong
SebastienBtr
Judy Bogart